Sample ET Questions English

Sample ET Questions
English
1. Select the answer choice which is closest to the meaning of Loquacious.
2. Researchers believe there is an association of cardiovascular risk with women who have
____________ occupations; one such occupation is that of a receptionist, who often spends the
entire day sitting at a desk.
3. Official records state that the Pueblo Indians lived in New Mexico and Arizona . The word
"Pueblo" comes from the Spanish word "pueblo," meaning town or village. The Spaniards
found these Indians living in apartment houses, some of them on the side of a cliff in order
that they could be reached only by ladders. Whenever they were attacked by Apaches, the
Pueblos would pull up the ladders. They grew corn, which they watered with water flowing
down in ditches. They wove cloth, made wonderful baskets, and created jars and pots out of
clay proving how skillful they were at hand-craft.
The Spaniards called these Indians "Pueblos" because they ____________ .
Intelligence Quotient
1. Which number should come next in this series?
25- -24- -22- -19- -15- -________
2. Which of the cubes is the same as the unfolded cube below?
Business Math
1. If 20 typists can type 48 letters in 20 minutes, then how many letters will 30 typists
working at the same rate complete in 1 hour?
2. A certain jacket was marked down 20% the first week and another 20% the next week.
What percent of the regular price was the final cost of the jacket after the two markdowns?
Marketing
1. What is Market Share?
2. Which of the following is not a part of Brand Communication and Marketing?
3. What is public service advertising?
Finance
1. Which of the following would be consistent with a hedging (maturity matching) approach to
financing working capital?
2. A business is owned by two partners in their mid-30's. After two years, the company has
recently started turning over a profit. Instead of taking the profit and paying taxes, they are
interested in investing in alternative methods that would defer those taxes. Which of the
following indirect compensation would NOT serve this purpose?
HR
1. Managing human resources as part of strategic operations management is difficult for many
firms. Although human resources will account for a small proportion of ___________ costs
(typically less than 10 per cent in high-volume manufacturing), human resources will often
be the first target in cost-cutting initiatives. The reason for this is that such reductions are
easily ______________________.
2. A company is looking to obtain ISO-9001 certification. The Quality Director asks you, the HR
Manager, to create the Training Procedure for the company. You divide the training
requirements of the firm into three areas:
- company-wide training,
- on-the-job training, and
- individual skill training.
Who should be responsible for identifying the need for training in each of these areas?
Law
1. Maximum term of punishment when a person is convicted at one trial of two or more
offences would be _________________.
2. Where the period of limitation prescribed for any suit, appeal or application expires on a
day when the Court is closed, the suit, appeal or application may be instituted, preferred or
made _____________.
3. In every district of a Province, there is a Court of _____________ which is the principal court of
original jurisdiction in civil matters.
4. Which of the following is the definition of oral evidence?
Industrial and Manufacturing Engineering
1. The Dulac Box plant produces 500 cypress packing boxes in two 10-hour shifts. Due to
higher demand, they have decided to operate in three 8-hour shifts instead. They are now
able to produce 600 boxes per day. What has happened to production?
2. A quality circle holds a brainstorming session and attempts to identify the factors
responsible for flaws in a product. Which tool do you suggest they should use to organize
their findings?
Mechanical Engineering
1. Environment friendly refrigerant R134a is used in the new generation domestic
refrigerators. Its chemical formula is:
2. For a fluid flow through a divergent pipe of length L having inlet and outlet radii of R1 and
R2 respectively and a constant flow rate of Q, assuming the velocity to be axial and uniform
at any cross-section, the acceleration at the exit is:
Telecom Engineering
1. The system shall permits a ________________ of spectrum efficiency and state-of-the-art
subscriber facilities.
2. The GSM radio link uses both ________ and ________ technologies.
Electrical Engineering
1. When a fuse is rated at 8 A, it means _____________.
2. The potential at a point is 20 V. The work done to bring a charge of 0.5 C from infinity to this
point will be ________.
Civil Engineering
1. If a simply supported concrete beam, prestressed with a force of 2500 kN, is designed by the
load balancing concept for an effective span of 10 m, and to carry a total load of 40 kN/m,
the central dip of the cable profile should be:
2. A circular shaft which has a diameter of 100 mm is subjected to a torque of 5 kN-m. The
shear stress, in N/mm^2 , induced in the shaft would be:
Electronic Engineering
1. A system has poles at 0.01 Hz, 1 Hz and 80 Hz; zeros at 5 Hz, 100 Hz and 200 Hz. The
approximate phase of the system-response at 20 Hz is:
2. In an abrupt p-n junction, the doping concentrations on the p-side and n-side are NA = 9*
1016/cm3 and ND = 1 * 1016/cm3 respectively. The p-n junction is reverse biased and the
total depletion width is 3 m m. The depletion width on the p-side is:
Computer Science
1. In C++, to use console objects to use input output, we must include the file:
2. In Object Oriented Programming, multiple inheritance is best described as?
3. In MIS, the acronym FTP stands for which of he following?
4. Which of the following WAN connection categories would include dial-up modems?