New products Punching tool construction I / 2015

New products
Punching tool construction I / 2015
CD catalogue 5.8.4.0
Online catalogue
By extending our range of products again, we are
reacting to your wishes and suggestions. Being a system
supplier, we are offering you an even greater assortment
of products available from stock. We are standardising
to great success – join us and benefit now from
standardisation, the decisive competitive advantage in
punching tool construction.
E 5240 Roller cage
» Due to the precisely adapted tolerances, the roller cage can be
exchanged without having to change the guide pillar or the bush
» The linear support of the profile rollers ensures zero-play guiding and
high stiffness
» Long service life due to the helically arranged profile rollers: every
single profile roller runs on its own track
» A profile roller can bear a much higher load than a ball of the same size
Strip guiding elements – extension of the range
» E 5632 Strip guiding pin and E 5640 Strip lifter with small diameters,
ideal for small installation spaces
» E 5636 Strip guiding rail in new dimensions – for lifting the strip higher
» E 5650 Pilot pin in more dimensions, for smaller diameters
» New, longer versions of the E 5650 Pilot pin for installation into the
punch retainer plate
EN
E 15581 Hollow round sections
» Ideal for making springs in application-specific
lengths, damping discs or machine elements
» Made from high-resistant, flexible polyurethane
rubber (PUR)
» Long service life due to the high abrasion
resistance and high resistance to fracture
E 15601 Thrust piece
» For lifting and pulling the punched parts safely off the strip
» High-performance in spite of the small fitting dimensions
» Noise-absorbing
» Long service life due to the high abrasion resistance and
high resistance to fracture
- 0.4
l
d 2 - 0.7
E 5590 Stripper
l3
d3
d1
Mat.: PUR (90 Shore A)
l3
5
t max. = 80°C
d2
4
6
8
10
13
16
d1
17
19
21
23
26
30
d3
1.6
3
» Zero-play on the cutting punch prevents drawing-in of
the strip
l
45
55
S
» The accurately fitting contour on the cutting shaft is
cut with the first stroke
» Made from elastomer – does not damage the surface
of the punched part
E 1564
» Increases the buckling resistance of cutting punches
d2
4
6
8
10
13
16
+
+
F (N) )*
Abstreifkraft
Stripper force
S
3
F (N) )*
600
650
700
900
1100
1400
S
6
F (N) )*
1150
1200
1300
1600
1900
2300
S
9
F (N) )*
1800
2100
2400
3000
3700
E 1565 Spring pre-loading unit
» For the one-by-one pre-loading of elastomer springs
» Suitable for our E 1556 and E 1558 elastomer springs
» As complete unit or individual components, available
immediately from stock
NP – Precision bars and NE – Blocks for eroding
» NP – Precision bars in material grade 1.2379 now also available
with thickness 15 mm
» NE – Blocks for eroding in material grade 1.3344 PM (PM23)
now also available with thickness 100 mm
» N – Standard bars in more material grades: 1.2344, 1.7131,
aluminium 3.4365
E 5330 Clamping pivot
» Enables easy, quick clamping of die sets
» Now also available with diameter 32 mm
» Available immediately from stock and in the
customary high quality
For further information please see www.meusburger.com
VPW 110 High-performance anti-corrosion wax
» Ideal for protecting the workpiece during wire EDM
» For longer term preservation and protection of metallic
surfaces under extreme conditions
» Compatible with lubricants
Speci
of al
fer
MSD 20000 Digital calliper
» Because of protection class IP67, ideal for using around machinery
» Fast switching from mm to inches and vice versa, in any position
» Certificate of calibration included
No.
Description
Size
Depth bar
MSD 20000/150/F
MSD 20000/150/R
Digital calliper IP67
Digital calliper IP67
150 mm
150 mm
flat
Ø 1,5 mm
Carbide thread milling cutters
» Excellent thread quality due to the low cutting pressure
» For metric threads M3 to M12 and BSP threads 1/16" to 2"
» WZG 17151 is especially suitable for steel with 43 to 63 HRC
Standard
price EUR
130
130
Special-offer
price EUR
110
110
IP 67
HWS 110 Clamping claw
» Infinitely adjustable clamping claw enabling quick clamping
» Designed for very high load
» Occupies little space on the machine table
» Enables easy, quick clamping of die sets
HWS 100 and HWS 102 Power clamps
» Ideal for clamping moulds onto injection moulding machines
or for clamping workpieces onto milling machines
» Suitable for clamp plates with threads or T-slots
» Clamping force: 20 or 25 kN
l
b
l1
SW )*
E 1270
d1
h
THL 100 Permanent lifting magnet
b2
b3
» Suitable for lifting flat and round parts
b4
» High lifting capacity through neodymium magnets
b5
» Easy operation by means of a hand lever
» Reliable protection against unintended deactivation
b1
Mat.: 1.1730
l
155
640 N/mm²
b1
40
eins kann fixiert werden
k can be fixed
b2
154
b3
116
b4
90
b5
60
b
200
h
470
Order now via our online catalogue at
www.meusburger.com
Devices for surface finishing
Micro motor systems
» High-quality, brushless micro motor system
» Various types of motors and chucks, suitable for any
kind of application
» Premium polisher attachment with adjustable stroke
Ultrasonic polishers
» Ultrasonic polishers are the optimal solution for complex
contours
» Premium ultrasonic polisher, 45W, with high polishing capacity,
for perfect material removal with various types of tools
» Standard ultrasonic polisher, 36W, ideal for working with
ceramic fibre stones
Flexible shaft units comprising of well-matched
components
» Powerful, heavy-duty hanging motor
» Flexible shafts are available with expanding ring or
duplex spring
» Various types of handpieces and control units enabling
effortless work
Wide range of air tools and accessories
» Premium-quality straight grinders, turbine grinders, angle
grinders and air files
» Air files from stroke length 0.15 mm, optimal for filigree work
» Accessories for air preparation and connection of the tools
Meusburger Georg GmbH & Co KG | Kesselstr. 42 | 6960 Wolfurt | Austria
T 00 43 (0) 55 74 / 67 06-0 | F -11 | sales@meusburger.com | www.meusburger.com
Ne
W