Swing Tyre Changers

G
7246
7240
rs
e
g
n
a
h
e C
r
y
T
g
Swin
SPEEDCHANGER G7246ID.26A
•26” outside clamping
•220 volt variable speed drive
•8000 lbs. bead breaker
High performance swing arm tire changer
for the high volume tire centers.
Exclusive 220v drive motor provides
needed torque for handling today’s difficult
assemblies.
True variable speed control allows operator
to match turntable rotational speed with
the job at hand.
The frame is large and reinforced, to grant
the utmost rigidity to the structure and
chucking table. The gear box is installed
between two steel plates, to avoid flexion
during operation.
The extra height of the vertical post and
tool shaft allow operation on tyres to a
max. of 15” (381 mm) width.
Available on 110V and single speed.
Ref. G7246I.26A
G72646ID.26A
220V
G7246I.26A
110V
IN
OUT
Ø MAX
VARIABLE
SPEED
12”-28,5”
10”-26”
46” (1170 mm)
1 SPEED
12”-28,5”
10”-26”
46” (1170 mm)
0 -15
EXTRA WIDE (BALOON TYPE)
EXTRA LARGE
15 RPM
15”
46”
G7246ID.26A
10” - 26”
12” - 28,5”
46” (1200 mm)
15” (380 mm)
15” (380 mm)
OPTIONS
PLUS91SA HELPER
Plus91SA help device is
optional for 7246.
8000 lbs (3600 kg)
220V - 1 hp
6,5/13 rpm
1200/900 Nm
STANDARD
METAL TOOL
27,2”
24,4”
60” (min.) - 72,2” (max)
TECHNICAL DATA
External clamping
Internal clamping
Max. tire diameter
Max. rim width
Max. bead breaker opening
Bead breaker cylinder
power at 175 psi
Motor
Turntable rotation speed
Max. torque to turntable
12,2”
20,3”
54,7” (I versions)
”
G7246ID.26A + PLUS91SA
36
47”
Packing Dimensions
45”
Shipping weight 550 lbs (250kg)
RAV Equipment U.S.A. Inc.
800.816.8138
info@ravamerica .com
www.ravamerica.com
INTERNATIONAL
Ravaglioli S.p.A.
40037 Sasso Marconi
Fraz. Pontecchio M.
P.O.B. 1690 - Bologna - Italia
Tel. +39 - 051 - 6781511
Fax +39 - 051 - 846349
rav@ravaglioli.com
www.ravaglioli.com
Plus91N help
device is optional
for 7240.
8000 lbs (3600 kg)
110V - 1 hp
9 rpm
1200 Nm
Packing Dimensions
”
•Top European quality at an entry
level price.
•Heavy duty structure to guarantee
proper working conditions at all times.
•110 volt single speed motor
•20” outside clamping
•Tire diameters of 40”.
•Bead breaker: galvanised cylinder with
simple operation.
•Rigid self-centering chuck and wide
clamping range.
G7240I.20A
10” - 20”
12” - 22”
40” (1000 mm)
12” (305mm)
12” (305 mm)
30
G7240I.20A
TECHNICAL DATA
External clamping
Internal clamping
Max. tire diameter
Max. rim width
Max. bead breaker opening
Bead breaker cylinder
power at 175 psi
Motor
Turntable rotation speed
Max. torque to turntable
39”
STANDARD SWING ARM 20/22
39”
Shipping weight 495 lbs (225kg)
OPTIONS
G800A6  26”
G800A5  20”
(4 x kit)
G800 A8 (2 x kit)
G800 A8K (10 x kit)
G800 A11K
(5 x kit)
G800A60
PLASTIC TOOL
Technical data and composition presented in this catologue may vary. Pictures reproduced are only indicative.