Automotive Ethernet Congress 2015 4. – 5. February 2015, Munich

Automotive Ethernet Congress 2015
4. – 5. February 2015, Munich
09:30-09:55
09:55-10:20
10:20-10:45
10:45-11:15
11:15-11:40
11:40-12:05
12:05-12:30
12:30-13:45
13:45-14:00
14:00-14:15
14:15-14:30
14:30-14:45
14:45-15:00
15:00-15:15
15:15-15:30
15:30-15:45
15:45-16:00
16:00-17:00
17:00-17:25
17:25-17:50
17:50-19:00
Introduction
Dr. Ingo Kuss, Elektronik automotive, Dr. Kirsten Matheus, BMW (Moderation)
Keynote: Design and Qualification of Automotive Ethernet – An OEM Perspective
Thomas Kirchmeier, BMW
Session 1: Methodologies for Test and Validation
Compliance Verification Process for Ethernet ECUs
Dr. Terezia Toth, Ruetz System Solutions
Enabling Interoperability in a Multi-vendor Environment of BroadR-Reach PHYs
Ricardo Sappia, C&S group
BroadR-Reach Ethernet Compliance Testing
Dr. Ernst Flemming, Rohde & Schwarz
Coffeebreak, Exhibition, Networking
Designing and Testing Synchronization Technology for In-Car Networks
Timothy Frost, Calnex Solutions
Timing-Assessment of Ethernet Network Configurations
Jonas Diemer, Symtavision
Approved Methods for Automotive Ethernet Component and Systemtests
Trung Thanh Pham, Technica Engineering
Lunch, Exhibition, Networking
Session 2: Tools
Simulation and Optimization of the Physical Automotive Ethernet Channel
Srdjan Djordjevic, Cadence Design Systems
Ethernet Backbone – Paving the Way towards Guaranteed Timing Behavior
Andrew Patterson, Mentor Graphics
Requirements and Solutions of a Seamless Ethernet Toolchain
Marc Weber, Vector Informatik
Simulation and Test of Ethernet Networks in Real-time
Björn Müller, dSpace
Compliance Tests for Automotive Ethernet
Thomas Stüber, Teledyne LeCroy
Signal Integrity Challenges for Physical Layer and Compliance for BroadR and Ethernet Signal
Markus Stocklas, Keysight Technologies
Assuring Performance, Quality, Reliability and Security of In-Vehicle Ethernet Networks
Thomas Schulze, Spirent Communications
Roadworthy? Testing the Automotive Ethernet Network
Alon Regev, Ixia
Standardized Diagnostic Tools for Applications with DoIP
Martin Sirch, Softing Automotive Electronics
Workshops at Exhibition
Session 3: Security
Security Market Trends and Challenges for the Connected Car
Rebeca Delgado, Freescale
Keep Hackers Off! Data Security & Privacy Protection for Automotive Ethernet
Marko Wolf, ESCRYPT
Get-together at Exhibition
WEKA FACHMEDIEN GmbH · Richard-Reitzner-Allee 2 · D - 85540 Haar
Wednesday, 4. February 2015
08:45-09:00
09:00-09:30
Thursday, 5. February 2015
09:45-10:10
10:10-10:35
10:35-11:05
11:05-11:30
11:30-11:55
11:55-12:20
12:20-13:30
Keynote: Ten Years Automotive Ethernet
Keynote: OPEN Alliance – Where Ethernet Meets the Automobile
Session 4: Cable/PHY
Optimized Connector and Cable Components for Automotive Ethernet
From OPEN Alliance BroadR-Reach to IEEE 802.3bp 1000BASE-T1 PHYs:
the Development of Next Generation Automotive Ethernet PHYs
N. N., BMW
Natalie Wienckowski, GM
Thomas Müller, Rosenberger Hochfrequenztechnik
Dr. Mehmet Tazebay, Broadcom
15:30-15:55
15:55-16:20
16:20-16:45
Coffeebreak, Exhibition, Networking
Automotive Electrical Communication Channels at 100Mbits/s – From HS CAN to Ethernet
Nicolas Morand, PSA PEUGEOT CITROEN
Enhanced Power Saving Concept for Ethernet in Automotive Applications
Thomas Suermann, NXP Semiconductors Germany
Introduction to Ethernet xMII Interfaces
Harald Zweck, Infineon Technologies, Stefan Fuchs, OTH Amberg-Weiden
Lunch, Exhibition, Networking
Session 5: AVB and Infotainment
Collaborative Approach to Increase Ethernet Experience into Infotainment
Martin Vasilevski, Renesas Electronics Europe
Real-life Experience with Ethernet in Infotainment
Stefan Singer, Freescale
Best Practices for Automotive AVB Network Design
Rick Kreifeldt, Harman
Roundtable: Lessons Learned from Automotive AVB Implementations
and their Impact on Ongoing IEEE Standardization Activities
Dr. Wilfried Steiner (Moderation), TTTech
Coffeebreak, Exhibition, Networking
Session 6: AUTOSAR and Software
Efficiency Consideration of SOME/IP in Automotive Gateways
Matthias Kessler, E.S.R.Labs
How Long Does it Take SOME-IP SD to Start? – An Analytical Approach
Jan Seyler, Daimler
The TCP/IP-Stack in AUTOSAR Ethernet Series Projects and Beyond
Josef Nöbauer, Continental
16:45-17:00
Feedback
13:30-13:45
13:45-14:00
14:00-14:15
14:15-15:00
15:00-15:30
Exhibitors & Sponsors (as at 8.10.2014)
powerd by:
Fachmedium für professionelle Automobilelektronik
Register now at: www.automotive-ethernet-congress.de
subject to change
08:45-09:15
09:15-09:45
Automotive Ethernet Congress 2015
4. – 5. February 2015, Munich
Ethernet is taking over the automobile – not only in a whole number
of development projects but also here and now in series vehicles. Hugely flexible
topology, lightning rates of transmission speed, great cost-saving potential and
security of future investment all make Ethernet a key element in the increased
networking of modern automobiles. Ethernet allows seamless integration into
the IT and consumer world – showing the way to entirely new possibilities in the
implementation of innovative functionality, connectivity and applications.
Of course challenges and problems also go along with the introduction of Ethernet.
And this is where the Automotive Ethernet Congress, set to be staged on
February 4-5, 2015 in Munich, addresses the needs of developers and designers.
With practice-attuned, application-related and solution-oriented papers and
workshops, the congress aims to present in-depth expertise for all those wanting to
explore and implement the whole potential of automotive Ethernet.
Highlights:
• Methodologies for Test and Validation
• Tools
• Security
• Cable/PHY
• AVB and Infotainment
• AUTOSAR and Software
• Keynote: Design and Qualification of
Automotive Ethernet – An OEM Perspective
• Keynote: Ten Years Automotive Ethernet
• Keynote: OPEN Alliance – Where Ethernet
meets the Automobile
Venue: RAMADA Hotel & Conference Center München Messe, Konrad-Zuse-Platz 14, 81829 Munich, Germany
Registration
Please send fax-registration to
+ 49 (0) 89 – 255 56 0725
Fill in, send, take part
Please note: In order to be registered you have to fill in all required fields marked with an
asterisk (*). (A confirmation email will be sent to you)
I want to register for:*
 Only first Conference Day (4 February 2015)
 Only second Conference Day (5 February 2015)
Last Name*
 Full Conference (4 – 5 February 2015)
First Name*
Day 1 – 4 February 2015
 Session 1: Methodologies for Test and Validation
 Session 2: Tools
 Session 3: Security
Mr./Ms./Title* Jobtitle
Company* Street* Department
Zip code* Day 2 – 5 February 2015
 Session 4: Cable/PHY
 Session 5: AVB and Infotainment
 Session 4: AUTOSAR and Software
Student (yes/no)
City*
Country*
Phone*
Email*
Conference fees
by Dec 3 from Dec 4
Date / Signature*
First Conference Day (Feb 4, 2015)
EUR 395,00
EUR 445,00
Second Conference Day (Feb 5, 2015)
EUR 395,00
EUR 445,00
Full Conference Day (Feb 4 – 5, 2015)
EUR 645,00
EUR 745,00
AGBS:
1. The attendance fee includes participation on the booked conference days, proceedings, lunch and refreshments.
2. You will receive a confirmation of your conference registration along with your invoice.
3. Cancellations received in writing before or on January 14, 2015 will be subject to a service charge of EUR 50 for
one-day registrations and EUR 100 for two-day registrations. For all cancellations received after January 14,
2015 the full conference fee remains payable. Substitutions within the same company are welcome at any time.
4. The organizers reserve the right to make changes in the program and/or speakers or to cancel sessions/tutorials if
conditions beyond its control prevail. Please check www.automotive-ethernet-congress.de for the latest
conference information.
5. Students: Students are granted a 50 % reduction, student ID required.
Please submit by fax to + 49 (0) 89 255 56 0725 or by email to KScheinig(at)weka-fachmedien.de.
6. For registrations of five persons and more from one company, please contact our conference department for
special rates.
7. For further details please find the detailed terms and conditions at www.automotive-ethernet-congress.de.
8. All fees excluded VAT.
All fees plus VAT.: 19 %
Contact:
Ms. Katrin Scheinig
Email: KScheinig@weka-fachmedien.de
Phone: + 49 (0) 89 – 255 56 1725
Fax: + 49 (0) 89 – 255 56 0725
WEKA FACHMEDIEN GmbH,
Richard-Reitzner-Allee 2, D-85540 Haar
Online Registration at
www.automotive-ethernet-congress.de