Made in the U.S.A.

Made in the U.S.A.
Pyrography: The art or process of producing designs on wood, or other material using heated tools or a fine flame.
Detailer
Super Pro
Cub
Galaxy
Renaissance
Since 1979 Colwood has supplied the art world with professional,
affordable woodburning tools and accessories. With a choice of
five control units and over 100 variations of 40 tip styles, Colwood can satisfy any skill level, budget, or pyrographic need.
No longer the sole province of duck and bird carvers, woodburning tools are now being used by everyone from the stamp artist to
the leather worker. New materials, such as vellum, ivory, bone,
eggshell, gourds, card stock, x-ray film, cork, and of course wood,
work well with Colwood tools.
Great Blue Heron
Burning your piece adds a unique dimension; the burned piece has more
depth than if the pieces were merely painted. The picture of the owl on the
left is an example of a woodburning that was also colored in. Woodburners
are also very popular with gourd artists. Some gourds are very hard and require a woodburner with more power; we recommend using a heavy duty
cord for generating this extra power.
Each of our products has been developed with the customer in mind. Using input from world class artists, we created and
tailored our products to satisfy your most meticulous needs. Thus, Colwood tools are precise, easy-to-use, and cost effective. All our units are manufactured right in our New Jersey locations in order to provide the best possible service.
Colwood also offers a full line of accessories, as well as books and instructional materials on carving and burning. Our
staff is knowledgeable and friendly, so feel free to give us a call for additional information or any questions or concerns
that you may have. If you have access to the Internet, please visit our web site at www.woodburning.com.
Colwood
44 Main Street
Farmingdale, NJ 07727
Tel: 732.938.5556
Fax:732.938.9037
www.woodburning.com
How Woodburning Units Work
Virtually all of the modern woodburning units are constructed in the same manner. A transformer provides the power and is controlled
by a device not unlike a light dimmer that passes the power to a handpiece cord where a burning pen and tip are attached. The transformer’s purpose is to step down the voltage to a useable level that is regulated by the controller that passes the power through the cord
to the handpiece and tip.
The Wattage Controversy
There has been a lot of misleading information concerning wattage on woodburning units. Many manufacturers make high wattage claims that are false. We have tested many of these units and
have found that they all consume less than 45 watts of power,
including the units claiming to deliver 130 watts max. Simply
put, wattage is power; and generally speaking, more is better than
less. The logical question to ask is, “How much wattage do I
need?” To answer this we conducted an experiment in our shop
using a wattmeter (a device that measures power consumption), a
Detailer with 18 gauge cord, and a “K” tip (small point). Several
lines were burned with the Detailer’s control knob set to 5. We
were able to burn nice, crisp “toast” colored lines-- the wattmeter
registered 15 watts! Next, we set the Detailer to full power. The
“K” tip glowed a bright orange, ignited the wood, and burned
thick, charred lines lacking the fine detail that artists require. The
wattmeter registered 27 watts. With respect to woodburning, we
feel that wattage rating is severely overrated. You should chose a
woodburner that has the features that you require, and a price tag
that fits your budget. Colwood’s wide selection of control units,
and handpiece cords make it easy for you to accomplish this
while satisfying all your artistic needs.
“K” Tip
Heat Setting of 5
Heat Setting of 10
“K” tip glowing with Detailer set to max power
Learn to Burn
“Pyrography Basics”
“The Art & Craft of Pyrography”
By
By
by
Lora Irish
Lora Irish
Deborah Pompano
Nationally recognized artist and pyrographer Lora S. Irish makes it easy for
beginners to learn the creative craft of
woodburning in Pyrography Basics.
All that aspiring beginners need is this
book and an inexpensive woodburning
tool to start adorning wood, gourds,
leather, paper and more ...
This book offers more than forty amazingly detailed new
projects that explore the craft of pyrography across a full
range of inventive media. Also included are tips and techniques on creating tonal values, understanding shadows,
adding color to your burnings, and finishing your work.
Each fascinating project has complete instructions plus photographs of both finished pieces and the work-in-progress
across pale, medium, dark, and detailed stages.
“Woodburning: Project & Pattern Treasury”
Inside this, her first book, Deborah Pompano shares
techniques for getting started in woodburning. You'll
learn what 5 tips she recommends, how to create a vast
variety of dimension, shade and texture with your
woodburner and how to develop your drawing skills
for use in pyrography.
At the heart of this book is an unbelievable treasure
trove of patterns. The patterns cover a wide spectrum
of themes including: harvest, arbor, birds and other
wildlife, seaside, clipper ship, teatime, Native American, garden, floral, lighthouse, and much more. The
book includes two practice exercises, one step by step
project and close up instruction on lettering.
More From Colwood
Pyrography Workshop DVD by Sue Walters
Control Unit Comparison Chart
Watch and follow along as Sue Walters demonstrates how to
create a bird portrait in high realism from pattern to finished
picture.
A complete instructional DVD workshop including:
• 1 hardcopy outline pattern
• 1 hardcopy texture map
• 1 hardcopy full color picture
• 2 DVD Set
Over 85 minutes One on One Training
Bonus 20 minute chapter—An introduction to Burning including Tips and Techniques, a How To Guide, and a Guide to
Troubleshooting
Pyrography Basics
Techniques and Exercises for Beginners
by Lora S. Irish
Nationally recognized artist and pyrographer Lora S.
Irish makes it easy for beginners to learn the creative
craft of woodburning in Pyrography Basics.
All that aspiring beginners need is this
book and an inexpensive woodburning
tool to start adorning wood, gourds, leather, paper and more with beautifully
burned images and patterns.
The author provides a thorough introduction to basic tools, materials and techniques. Readers learn how to set up a practice board to
experiment with strokes and settings before moving on to
working projects with confidence. Seven skill-building
projects provide step-by-step exercises in using temperature, time, layering and texturing to create artistic tonal
values.
Specialized Tip Packages Now Available
Ball Tip Package
Circle Tip Package
Shading Tip Package
All 3 ball tips can now
be purchased together in
a package at discounted
prices. Ball Tip Packages are available in the
Fixed Tip and Replaceable Tip Systems
All 4 circled tips can
now be purchased together in a package at
discounted prices. Circle
Tip Packages are available in the Fixed Tip or
Replaceable Tips Systems.
Circle Tip Sizes
.071”
.100”
.189”
.240”
Colwood is now offering 4
shading tips in a package at
discounted pricing. The
Shading Tip Packages are
available in the Fixed Tip
and Replaceable Tip Systems. The 4 shading tips
offered in the package are:
S
LSS
Spoon Shader
Small Round Shader
Call or visit our website for
pricing and more details.
Call or visit our website for
pricing and more details.
B1—.0394” dia.
B2—.0625” dia.
B3—.0938” dia.
Call or visit our website for
pricing and more details.
Variable
Heat
Control
Handpiece
Clip
Separate
On/Off
Switch
Removable
Handpiece
Cord
Accepts
RT / FT
Available
In Kit
Digital
Display
Detailer
Yes
Yes
Yes
Yes
Yes
Yes
No
Cub
Yes
No
No
No
Yes
Yes
No
Super Pro
II
Yes
Yes
(2)
Yes
Yes
Yes
Yes
No
Olympiad
Yes
No
Yes
Yes
Yes
No
No
Galaxy
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Sally’s Artist Graphite and Transfer Paper
Use Sally's WAX FREE Artists Graphite Paper to transfer your design from a pattern,
sketch, template or free-hand onto ANY surface: paper, wood, fabric, canvas, metal, glass,
tile, ceramic, etc. Sally's leaves no wax residue, so the transfer line can be erased like
pencil with any eraser; it can be washed off ceramic, glass, tile and metal.
Sally's can be washed out of fabric and a hot iron will NOT set the transfer
lines as with other tracing or transfer papers made for fabrics. The transfer
line can be painted or inked over with no skipping or bleeding. Each sheet
can be used over and over again - Economical.
12 Individual Sheets 18" x 24" or one roll 12’ x 12”
Woodburning Kits
For those people who are not sure what to purchase,
Colwood has several kits that are available with the most
popular tip styles. These tip styles are designed to let the
artist achieve the most popular techniques — fine detail,
writing/drawing and shading. The Deluxe Kits (pictured)
includes an instructional book, a piece of poplar, cleaning cloth and honing paper. Visit our web site for more
details.
How to Use Your Colwood Woodburning Tool
Colwood Now Has a YouTube Channel
To view our latest videos visit www.youtube.com and search for
“Colwood Woodburning Tools”.
A guide to using Colwood Woodburning tools. This video walks you
through tip systems and proper burning techniques, outlining everything you need to know. It also contains common questions and answers, common problems and solutions, and helpful hints.
Control Units
Precision, Versatility, Control, and Service - Qualities that describe Colwood’s full line of woodburning
tools and accessories. Colwood offers five control units with their own distinct features to satisfy all skill
levels—the novice to the professional artist. Each unit includes a sold state controller and an ultra-flex cord
as standard equipment. The “guts” of all our control units are housed in a sturdy, custom “cold rolled steel”
enclosure, as opposed to a generic, off-the-shelf, plastic box that is susceptible to potential cracking or
melting from careless mistakes. All of our units are manufactured and serviced right in our factory. Thus, we
can ship virtually every order and repair within a 24 hour period.
The Galaxy
Digital display (nominal range 0-550) / 55 distinct temperature settings /
Circuitry that compensates for fluctuations in line voltage / 3-Pronged
AC cord and built in fuse / Precise, solid state temperature controller /
Terminal barrier for easy replacement of handpiece cord / Separate on-off
switch / Clip for mounting handpieces / One ultra-flex cord (18 gauge) /
Four year warranty / Tip and handpieces sold separately
The Super Pro II
The most versatile of Colwood’s line / Selectable front panel switch allowing the user to have two different tip styles set up and ready to use /
Two terminal barriers for easy replacement of handpiece cords / Lighted
on-off switch / Precise solid state temperature controller / Highly visible,
slanted front panel / One ultra-flex handpiece cord (18 gauge) / One
heavy duty handpiece cord (16 gauge) / Recommended unit for fish carving / Two year warranty / Tips and handpieces sold separately
The Detailer
Colwood’s original wood burner / Lighted on-off switch / Precise solid
state temperature controller / Terminal barrier for easy replacement of
handpiece cord / Clip for mounting handpieces / Two year warranty /
Tips and handpieces sold separately
The Cub
The smallest and most economical of Colwood’s line /
Compact and handy for travel / Pilot light / On-off
switch incorporated into the dial / Precise solid state
temperature controller / Cable clamp which allows the
user to suspend the unit over the work area / One ultraflex cord (18 gauge) / Two year warranty / Tips and
handpieces sold separately
The Olympiad
Widest heat range of all our units; contains two transformers / Lighted on-off switch / Precise solid state temperature controller / One ultra-flex handpiece cord (18
gauge) / Ideal for signs and plaques, woodworkers,
gourd artists / Hot Knife included (not pictured) / Two
year warranty / Handpiece pictured not included
Tip Packages
Tip Packages are available in both Fixed and Replaceable.
Ball Tip Package
Gourd Tip Package
Product ID: BTPF
Product ID: BTPR
Product ID: GTPF
Product ID: GTPR
-C
-E
-H
-J
-S
- B2
- B1
- B2
- B3
Shading Tip Package
Standard Variety Tip Package
Product ID: STPF
Product ID: STPR
Product ID: VTPF
Product ID: VTPR
-B
-C
-D
-J
-S
-S
- LSS
- SP
- SRS
Circle Tip Package
Product ID: CTPF
Product ID: CTPR
Deluxe Variety Tip Package
-B
-C
-D
-J
-S
- .071
- .100
- .189
- .240
Tip Cleaning Burrs
Product ID: TCB
-K
- MC
- MR
- C1
Make Your Own Tip Package
Product ID: MTP
Allows for easy removal of
carbon buildup, resulting in
longer tip life and more
hours of comfortable burning.
Package of 5 — $7.00/PK
Product ID: VDPF
Product ID: VDPR
Used with Grinders ex.
Dremel, Foredom, RAM,
NSK, etc. with an 1/8”
collet.
Colwood now offers
a package that includes everything
you need to create
your own custom tip.
Includes:
-2 RT Bushings
-6” Straight Wire
-1’ High Temp Solder
IMPORTANT: Tip must be
soldered into bushing or it can
result in damage to the RT
handle.
Suggested Tip Uses
Rounded Tips A, D, J, Mini J, SRW, LRW - Used anywhere on the carving. Best for straight thin lines and concaved areas
where the rounded tip helps prevent gouging. The SRW and LRW are unsharpened tips that can be used for doing hair and
thicker lines.
Pointed Tips B, F, G, K - Used anywhere on the carving, especially good for thin lines on flat areas.
Styles BR, GR, HR, KR, MR - Developed at the suggestion of world class carvers. The heel has been rounded off to prevent
digging into the wood.
Style C, MC - These are two writing tips used in signing your work. Style C is similar to a med-large ballpoint pen. The MC is
similar to a fine ballpoint pen. Each MC is individually ground and polished. The MC is is used for extremely fine writing, raising a
duck bill’s nostrils, indenting around a duck bill nail, carving wrinkles on birds and fish, modeling around eyes, modeling bird feet,
finishing the center shaft of feathers and signing.
Special Purpose Tips DA & DG - Double line burning tips allowing you to burn two lines simultaneously.
Style E - A general burning tip shaped like a spade with symmetrical burning edges.
Style FSL, FSM, FSS - Designed to burn scales on fish. FSL - 1/4”, FSM - 3/16”, FSS - 1/8”
Style H - The same size and shape as the “G” tip, but made with a heavier gauge material. This tip is sharpened with a wider
angle. It will burn a fine line, but does not burn as deeply into the wood as other tips.
Style LE - The “flame tip” or “Long E”. A smaller, longer (1-3/8”) version of the “E” tip ideally suited for smaller carvings. It has a
sharp edge on both sides. Made from heavier gauge wire.
Style LM - Same shape as the “M” tip but a little longer (1-3/8”)
Style M - A micro tip, especially useful on miniatures and wherever fine detail burning is desired.
Needle Point - This tip style is very similar to a sewing needle and is useful for extremely fine detail and pointillism.
Style PS - Very useful for burning in tight and hard-to-reach areas like under wings. One of Colwood’s longest tips (1-3/8”)
Circles - Used to burn circles. Four diameters: .071”, .100”, .189”, .240”. Burn complete circles with one impression
Styles S, SP, LSS, SHS, SRS - These are all shading tips, used for adding highlights to the work piece. The “S” is the standard
and most popular of the shaders which is suitable for most applications. The “SP” is similar to a spoon shape and useful in tight
areas. The “LSS” is the largest of the shaders and best for larger strokes. The “SRS” and “SHS” are the newest of the shading
tips. The “SHS” is probably the smallest of the shading tips and is pre-polished. The “SRS” is also pre-polished and is a medium
to small sized shading tip.
Style QT (Quill Tip) - This tip is used for outlining feathers and shading.
Style SQ - Used in raising of shafts and outlining feathers. Also suited for flat burning and for raising sharp lines, shading and
calligraphy.
Ball Tips - There are three sizes: B1(.039”), B2(.062”), B3(.093”). These tips are chrome ball bearings that glide effortlessly
across the work area and are great for drawing, writing and burnishing.
Angled Tips - Used to outline and raise feathers and shading or detailing under wings. Available in 45 or 90 degree angle.
(Please specify tip angle and whether for right handed or left handed use when ordering.)
Accessories
#0500
RT Handle
#2010TWW Replacement Writing Tip for Hot Knife*
#0000C
Fixed Tip Protective Container
#2011
Heavy Duty Olympiad Cord*
#0020C
Replaceable Tip Protective Container
#2012
Ultra Flex Olympiad Cord*
#0150F
Foam Grip for handpieces
#3100
Graphite Paper 18” x 24”
#0155
EZ Tip Puller
#SPC0001
Saral Transfer Paper 12’ Roll
#0200
Honing Paper
#SPC0020
Sally’s Graphite Paper—12 sheets 18” x 24”
#0201
Cleaning Cloth (for keeping tips clean)
BMP
Binocular Magnifier w/ 3 lenses
#0750
18 gauge handpiece cord
BML
Binocular Magnifier Light
#0801
16 gauge handpiece cord
KDP
Kiln Dried Poplar
#0802
14 gauge handpiece cord
TCB
Tip Cleaning Burrs –Pack of 5 (for keeping tips clean)
#0850
Adapter Cord for Detail Master
#0850H
Heavy Duty Detail Master Adapter Cord
#PB1
Pyrography Basics: Techniques and Exercises for Beginners
#0851
Adapter Cord (male x female)
#FC1
Great Book of Woodburning—Instruction
#0852
Razortip Adapter (Razortip tips to Colwood Unit)
#FC2
Woodburning: Project & Pattern Treasury
#0860
Plastic Carrying Case
#FC3
The Art & Craft of Pyrography
#0860S
Storage Box (8-1/4” x 4-1/2” x 1-3/4”)
#SW3
Pyrography Workbook—Instruction
#0866
Wood Carrying Case
#FR1
Carving Patterns by Frank Russell; 80 carving patterns
#2010D
Hot Knife w/ Detail Tip*
#SW5
Pyrography Workshop—2 DVD Set
#2010W
Hot Knife w/ Writing Tip*
#SP1
Learning the Art of Pyrography by Al Chapman
#2010TWD
Replacement Detail Tip for Hot Knife*
Books & Instructional Materials
*These products can only be used with the Olympiad control unit.
Instructions for Insertion and Removal of
Fixed Tip Handpieces and Replaceable Tips
Fixed Tip Handpiece
Cork
RT Handle
A
Handpiece Cord
A
Male Connector
Male Connector
B
Female Connector
The Fixed Tip handpiece and the RT handle connect
to the Handpiece cord in exactly the same manner;
Male Connector inserts into the Female connector.
The burning tip cannot be removed from the Fixed Tip
Handpiece.
The RT Handle does not come with any tips; they
must be purchased separately. See below for instructions
on how to insert or remove the RT tip assembly into
RT Handle.
Handpiece Cord
Insertion of Fixed Tip Handpiece and RT Handle into Handpiece Cord
A
B
INCORRECT
CORRECT
IMPORTANT - Make sure that the Male connector “A” is pushed all the way into, and completely covers
the Female Connector “B”. If not fully engaged intermittent operation could result.(see picture abo ve)
RT Tip Insertion and Removal Instructions
RT Tip Assembly
COLLAR
HOW TO INSERT RT TIPS INTO HANDLE
KEYWAY
The whole RT Tip Assembly is
the replaceable tip. The tip wire
cannot be removed from the assembly.
When you want to change tip styles
just change the RT Tip Assembly.
COLLAR
KEYWAY
1. Grasp tip assembly by the collar
2. Align keyway in tip with key in handpiece
3. Push tip in firmly
KEY
EZ Tip Puller
HOW TO REMOVE TIP
1. Grasp tip firmly by collar and
pull out.
OR
2. Use our EZ Tip Puller as shown
to the left.
PULL
Handpiece Systems
Colwood offers two kinds of handpiece systems: the Replaceable / Removable Tip and the Fixed Tip. All tip styles
are available in either system. In both systems all important connections are gold plated to reduce corrosion and enhance reliability.
RT System
FT System
The RT system has three components: the Tip Wire,
the RT Bushing and the RT Handle / Handpiece. The
RT Tip Assembly comprises the Tip Wire and the RT
Bushing. The Tip Wire cannot be removed from the
RT Bushing, it is permanently crimped and soldered
into the RT bushing which provides a more reliable
and consistent burn. The RT Tip Assembly plugs into
the RT Handle / Handpiece that has special gold plated
connectors that ensure consistent operation. To change
tip styles, just change RT Tip Assembly.
The FT system also has the three components, but they
are hard wired and cannot be separated. Like the RT
System, the Tip Wire cannot be removed from the FT
Bushing. However, the FT System differs from the RT
in that the FT Bushing cannot be removed from the
Handle / Handpiece. To change tip styles the entire FT
Handpiece is unplugged from the handpiece cord and
replaced with a handpiece that has a different tip style.
RT Bushing
Tip Wire
FT Bushing
Tip Wire
RT Tip Assembly
FT Handpiece
RT Handle / Handpiece
Advantages and Disadvantages
Although both Systems provide consistent and reliable operation, there are some advantages and disadvantages to
both. The biggest advantage of the RT System is price. You only have to purchase one Handle / Handpiece and each
tip style is less expensive than its counterpart in the FT System. The advantage of the FT System is ease of use. Even
though an EZ Tip Puller is available for the RT System, the FT Handpieces are easier to change. The RT System has
one more electrical connection (RT Bushing into Handle) than the FT System. Over time this connection may become
worn as a result of constant changing of tip styles, and inconsistent operation may result. Having said this, however,
the RT System is far more popular; a resounding testament to its superior design over the competitor’s replaceable tip
system.
Note: It is recommended to have a second RT Handle as a back-up.
Colwood Price List
Standard Kits
SKU
CSP
CSPF
DSP
DSPF
GSP
GSPF
SPSP
SPSPF
GSK
GSKF
Deluxe Kits
Description
Cub Standard Kit w/RT
Cub Standard Kit w/FT
Detailer Standard Kit w/RT
Detailer Standard Kit w/FT
Galaxy Standard Kit w/RT
Galaxy Standard Kit w/FT
Super Pro Standard Kit w/RT (inc. 2 RT handles)
Super Pro Standard Kit w/FT
Gourd Standard Kit w/RT
Gourd Standard Kit w/FT
Price
SKU
153.00
CDP
162.00
CDPF
165.00
DDP
174.00
DDPF
279.00
GDP
288.00
GDPF
214.00
SPDP
207.00
SPDPF
183.00
GDK
195.00
GDKF
Description
Cub Deluxe Kit w/RT
Cub Deluxe Kit w/FT
Detailer Deluxe Kit w/RT
Detailer Deluxe Kit w/FT
Galaxy Deluxe Kit w/RT
Galaxy Deluxe Kit w/FT
Super Pro Deluxe Kit w/RT
Super Pro Deluxe Kit w/FT
Gourd Deluxe Kit w/RT
Gourd Deluxe Kit w/FT
Price
219.00
250.00
231.00
262.00
345.00
376.00
280.00
295.00
199.00
212.00
Control Units
2000
2000H
2001
2001H
2001R
2001V
2013
Cub
Cub w/HD Cord
Detailer
Detailer w/HD Cord
Detailer w/Hi Power Cord
Detailer - 220V
Galaxy
63.75
2009
65.75
2004
75.75
2006
77.75
2004V
79.75
CCB25
97.25
CCBTP
Olympiad w/Hot Knife & Uf Cord
Super Pro II(UF&HD Cord)
Super Pro II w/2 UF Cords
Super Pro II - 220V
Colwood Craft Burner
Tip Package for CCB25 ONLY - 19 Tips
212.00
109.00
109.00
130.50
15.99
15.95
190.00
Tip Packages
54.00
BTPR
STPF
All 3 FT-Ball Tips (B1,B2,B3) Save $5.85
4 FT Shaders (S,SRS,SP,LSS) Save $6.55
58.25
CTPF
4 FT Circle Tips (.071, .100, .189, .240 dia) Save $8.30
75.50
GTPF
Gourd Tip FT-C,E,H,J,S,B2 Save $4.50
85.00
VTPF
Standard Variety Tip FT-B,C,D,J,S Save $3.75
VDPF
Deluxe Variety Tip FT-B,C,D,J,S,K,MC,MR,C1 Save $6.55
BTPF
43.00
STPR
All 3 RT Ball Tips (B1,B2,B3) Save $4.85
4 RT Shaders (S,SRS,SP,LSS) Save $4.55
CTPR
4 FT Circle Tips (.071, .100, .189, .240 dia) Save $6.30
61.50
GTPR
Gourd Tip RT-C,E,H,J,S,B2 Save $2.75
53.00
66.00
VTPR
Standard Variety Tip RT-B,C,D,J,S Save $1.75
38.00
124.00
VDPR
Deluxe Variety Tip RT-B,C,D,J,S,K,MC,MR,C1 Save $3.80
74.75
40.25
Accessories & Additional Products
0500
15.95
0.75
0860
0.50
0860S
1.00
0866
1.25
2010D
RI116
RT Handle
Fixed Handpiece Container
Replaceable Tip Container
Extra Handpiece Clips
Extra Custom Cork Grip
Foam Grip
Cork Heat Shield
EZ Tip Puller
Honing Paper
Colwood Cleaning Cloth (for tips)
Ultra Flex Cord
Heavy Duty Cord (16awg)
High Power Cord (14awg)
Detail Master Adapter Cord
Heavy Duty Detail Master Adapter Cord (16awg)
Adapter Cord (male x female)
Razortip Adaptor (Razertip tips w/Colwood unit)
1/16" Collet for Dremel, Foredom, RAM, NSK, etc.
RI332
3/32" Collet for Dremel, Foredom, RAM, NSK, etc.
FC1
Great Book of Woodburning
Woodburning: Project & Pattern Treasury
The Art & Craft of Pyrography
Learning the Art of Pyrography
0000C
0020C
0100
0150
0150F
0151
0155
0200
0201
0750
0801
0802
0850
0850H
0851
0852
RI18
1.00
2010W
1.75
2010TWD
5.25
2010TWW
1.50
2011
1.50
2012
12.50
3100
14.75
SPC0001
16.75
SPC0020
16.25
BMP
18.25
BML
16.25
KDP
10.00
TCB
22.00
SOL
22.00
MTP
1/8" Collet for Dremel, Foredom, RAM, NSK, etc.
Plastic Carrying Case w/ storage box
Storage Box
Wood Carrying Case
Hot Knife w/Detail Tip (use with Olympiad only)
Hot Knife w/Writing Tip (use with Olympiad only)
Replacement Detail Tip for Hot Knife
Replacement Writing Tip for Hot Knife
Heavy Duty Olympiad Cord
Ultra Flex Olympiad Cord (18awg)
Graphite Paper 18" x 24"
Saral Transfer Paper 12' Roll
Sally's Graphite Paper -12 sheets 18" x 24"
Binocular Magnifier w/3 lenses (1.75x,2.25x,2.75x)
Binocular Magnifier Light
Kiln Dried Poplar (7-1/4" x 13")
Tip Cleaning Burrs-Pacakge of 5-Use with 1/8" Collet
High Temp Solder - 1 Foot
Make Your Own Tip Package
22.00
28.50
7.75
44.95
55.95
55.95
20.00
20.00
18.95
16.95
3.95
12.75
17.75
24.95
9.95
1.50
7.00
2.00
13.50
Books & Instructional Materials
FC2
FC3
SP1
22.95
SW3
24.95
FR1
19.95
12.95
SW5
PB1
Pyrography Workbook
Carving Patterns by Frank Russell
Pyrography Workshop DVD (2 DVD Set)
Pyrography Basics
Prices Subject to Change Without Notice
19.95
14.95
24.95
10.95
Colwood Price List
Fixed Tips (FT)
SKU
0001
0001D
0001W
0002
0002R
0002U
0002G
0003
0003M
0003N
0004
0004W
0005
0006
0007
0007R
0007D
0008
0008R
0008GO
0009
0009M
0010
0010BA
0007BA
0010R
11SP
0011
0011S
0011H
8003S
FSHS
0012
0014
0014R
0016
0017
0018
0018S
18Q
8001
8002
8003
8003L
8001C
8003C
FR071
FR100
FR189
FR240
FTB1
FTB2
FTB3
0000
3000
Description
FT-A (1/4")
FT-DA (3/16")
FT-Large Round Wire
FT-B (1/4")
FT-BR (1/4")
FT-B Unsharpened (1/4")
FT - Bob Guge
FT-C (.076")
FT-MICRO C (.03)
FT-Needle Point
FT-D (3/16")
FT-Small Round Wire
FT-E (1/4")
FT-F (3/16")
FT-G (3/16")
FT-GR (3/16")
FT-DG (3/16")
FT-H (3/16")
FT-HR (3/16")
FT-Pat Godin
FT-J (1/8")
FT-Mini J
FT-K (5/32")
FT-Larry Barth - K
FT-Larry Barth - G
FT-KR (5/32")
FT-Spoon Shader
FT-S (3/16")
FT-Sm. Round Shader
FT-S w/ Heavy Wire
FT-Large Square Shader
FT-Small Heavy Shader
FT-PS (1/8" x 1 3/8")
FT-M (3/32")
FT-MR (3/32")
FT-SQ (3/32")
FT-LM (3/32" x 1 3/8")
FT-LE (3/32" x 1 3/8")
FT-Short LE
FT-Quill Tip
FT-FSS (Small 1/8")
FT-FSM (Medium 3/16")
FT-FSL (Large 1/4")
FT-Xlg Fish Scale (3/8")
FT-C1
FT-C2
FT-Circle .071" Dia.
FT-Circle .100" Dia.
FT-Circle .189" Dia.
FT-Circle .240" Dia.
FT-Ball Tip #1 .0394"
FT-Ball Tip #2 .0625"
FT-Ball Tip #3 .09375"
FT Handle w/ out tip
6" Nichrome Wire
Replaceable Tips (RT)
Price
Large Round
2 Line Round
Stoning
Large Point
Rounded Heel
Unsharpened
Unsharpened
Writing
Micro Writing
Needle Point
Small Round
Stoning
Spade
Spear
Small Point
Rounded Heel
2 Line Point
Heavy Point
Rounded Heel
Pat Godin
Tight Round
Mini J
1/2 Small Point
Larry Barth
Larry Barth
Rounded Heel
Spoon Shader
Shading
Shading
Shading
Shading
Shading
Primary Short
Micro
Rounded Heel
Square
Long M
Small Long E
Short LE
Quill Tip
Fish Scale
Fish Scale
Fish Scale
Fish Scale
Sm. Calligraphy
Lg. Calligraphy
Circle
Circle
Circle
Circle
Ball Tip
Ball Tip
Ball Tip
13.95
19.95
13.95
13.95
14.95
13.95
17.95
13.95
17.95
18.95
13.95
13.95
13.95
13.95
13.95
14.95
20.95
13.95
14.95
17.95
13.95
15.95
13.95
17.95
17.95
14.95
17.95
13.95
17.95
14.95
14.95
17.95
13.95
13.95
14.95
13.95
13.95
13.95
13.95
17.95
16.95
16.95
16.95
19.95
13.95
13.95
20.95
20.95
20.95
20.95
19.95
19.95
19.95
10.95
2.50
SKU
0021
0041
0021W
0022
0022R
0022U
0022G
0023
0023M
0023N
0024
0024W
0025
0026
0027
0027R
0042
0028
0028R
0028GO
0029
0029M
0030
0030BA
0027BA
0030R
31SP
0031
0031S
0031H
0038S
RSHS
0033
0035
0035R
0043
0044
0045
0045S
45Q
0036
0037
0038
0038L
0036C
0038C
R071
R100
R189
R240
RTB1
RTB2
RTB3
0020
3000
0500
Description
RT-A (1/4")
RT-DA (3/16")
RT-Large Round Wire
RT-B (1/4")
RT-BR (1/4")
RT-B Unsharpened (1/4")
RT- Bob Guge
RT-C (.076")
RT-MICRO C (.03)
RT-Needle Point
RT-D (3/16")
RT-Small Round Wire
RT-E (1/4")
RT-F (3/16")
RT-G (3/16")
RT-GR (3/16")
RT-DG (3/16")
RT-H (3/16")
RT-HR (3/16")
RT-Pat Godin
RT-J (1/8")
RT-Mini J
RT-K (5/32")
RT-Larry Barth - K
RT-Larry Barth - G
RT-KR (5/32")
RT-Spoon Shader
RT-S (3/16")
RT-Sm. Round Shader
RT-S w/ Heavy Wire
RT-Large Square Shader
RT-Small Heavy Shader
RT-PS (1/8" x 1 3/8")
RT-M (3/32")
RT-MR (3/32")
RT-SQ (3/32")
RT-LM (3/32" x 1 3/8")
RT-LE (3/32" x 1 3/8")
RT-Short LE
RT-Quill Tip
RT-FSS (Small 1/8")
RT-FSM (Medium3/16")
RT-FSL (large 1/4")
RT-Xlg Fish Scale (3/8")
RT-C1
RT-C2
RT-Circle .071" Dia.
RT-Circle .100" Dia.
RT-Circle .189" Dia.
RT-Circle .240" Dia.
RT-Ball Tip #1 .0394"
RT-Ball Tip #2 .0625"
RT-Ball Tip #3 .09375"
RT Bushing w/ out tip
6" Nichrome Wire
RT Handle (necessary for RT Tips)
Price
Large Round
2 Line Round
Stoning
Large Point
Rounded Heel
Unsharpened
Unsharpened
Writing
Micro Writing
Needle Point
Small Round
Stoning
Spade
Spear
Small Point
Rounded Heel
2 Line Point
Heavy Point
Rounded Heel
Pat Godin
Tight Round
Mini J
1/2 Small Point
Larry Barth
Larry Barth
Rounded Heel
Spoon Shader
Shading
Shading
Shading
Shading
Shading
Primary Short
Micro
Rounded Heel
Square
Long M
Small Long E
Short LE
Quill Tip
Fish Scale
Fish Scale
Fish Scale
Fish Scale
Sm. Calligraphy
Lg. Calligraphy
Circle Tip
Circle Tip
Circle Tip
Circle Tip
Ball Tip
Ball Tip
Ball Tip
7.95
14.95
7.95
7.95
8.95
7.95
13.95
7.95
13.95
14.95
7.95
7.95
7.95
7.95
7.95
8.95
17.95
7.95
8.95
11.95
7.95
8.95
7.95
11.95
11.95
8.95
13.95
7.95
13.95
8.95
8.95
13.95
7.95
7.95
8.95
7.95
7.95
7.95
7.95
13.95
13.95
13.95
13.95
17.95
7.95
7.95
16.95
16.95
16.95
16.95
15.95
15.95
15.95
4.95
2.50
15.95
Name_________________________________________________________________ Phone______________________________________
Address___________________________________________________________________________________________________________
City______________________________________________________________ State ________ Postal Code_________________________
Email ____________________________________________________________________________________________________________
Credit Card #_____________________________________________ Sec. Code________________________ Exp. Date________________
PART #
QTY
DESCRIPTION
PRICE
TOTAL
SUBTOTAL
7 % (NJ RESIDENTS ONLY) TAX
SHIPPING & HANDLING
TOTAL
DOMESTIC SHIPPING AND HANDLING CHARGES
ORDER TOTAL
$0.01—$9.99
$10.00—$49.99
$50.00—$99.99
$100.00—$199.99
Over $200.00
COST
$5.75
$6.75
$7.75
$10.75
$11.75
Shipping and handling charges apply to the 48 contiguous states. Call or Email for shipping charges to
Alaska and Hawaii. You can also visit our web site, www.woodburning.com where you can place your
order and make payment through PayPal, the secure payment system.
It’s Safe, Simple and Fast.
All international shipments will be shipped via USPS unless requested otherwise and will be charged the actual shipping and hankling cost plus $3.00 handling per carton. All prices subject to change without notice.
Return & Repair Policy
Returns
If you wish to return your order for any reason you must notify Colwood within 10 days after receiving it. Refunds are
only issued for items after they are returned in their original, undamaged condition. When returning an item you should
use the original packing material and ship it via an insured carrier. Colwood is not responsible for any damage in return
shipping. Actual shipping and handling charges are not refundable.
If you wish to return items that were ordered in quantities of 10 or more, there will be 20% restocking fee. There is also
a 20% restocking fee for any Reed & Barton item regardless of quantity.
If you receive an item that you believe was damaged in shipment, you must notify Colwood within 10 days of receipt of
your order. DO NOT throw away the original packing material. Damaged or defective items will be replaced with an
identical product and return shipping will be refunded.
If your equipment was purchased from one of our distributors you should consult them as to their return policy.
Repairs
If your woodburner is in need of repair you should send the unit directly to us; DO NOT try to repair the unit yourself.
Attempting to repair the unit yourself will void any existing warranty. If you send the unit in for repair you should include the following:
•
A brief note explaining the problem
•
The control unit (Detailer, Super Pro, Cub, etc.) with handpiece cords attached
•
Any RT Handles or FT Handpieces used when experiencing the problem.
•
Any RT Tip if applicable
•
A daytime phone number where you can be reached
Handpieces and tips cannot be repaired but should be included when sending a unit in for repair as they are sometimes
the cause of the problem.
After our technical staff evaluates the woodburner you will be given a call with an estimate for repair. The vast majority
of repairs cost less than $25.00.
Warranty Information
Renaissance Controller
2 Years*
Renaissance Grinder Motor
6 Months
Galaxy
4 Years*
Olympiad
2 Years*
Super Pro II
2 Years*
Detailer
2 Years*
Cub
2 Years*
All Handpiece Cords
1 Year
Fixed Tip Handpieces
3 Months
RT Handle
3 Months
RT Tips
3 Months
*Does not include handpiece cords, handpieces or tips. These
items are covered under a separate warranty.
If any piece of equipment should be in need of repair, do not attempt to repair it yourself. For the warranty to remain valid ALL
work must be done in our factory. When sending a unit in for repair please include a brief description of the problem and a daytime phone number.
Colwood
44 Main Street
Farmingdale, NJ 07727
T: 732.938.5556
F: 732.938.9037