Low IMD 3 x 3 Combiner Matrixes Features

sdptelecom.com
Low IMD 3 x 3 Combiner Matrixes
Hybrid Coupler / Combiner / Splitter
Wide Band from 698-2700 MHz
Features
•High in-band isolation
•Low VSWR
•4.8dB coupled loss per channel (ideal)
•Low passive intermodulation (PIM)
•Low insertion loss
•High power rating, 100 W per port and 3 KW peak
•Indoor and outdoor applications
•Connects 3 inputs to 3 outputs
•Operating temperature -25°C to +85°C
•RoHS compliant
SDP Part Number
(N-Type)
Frequency Isolation
Range (MHz)
(dB)
COM33ADA000
698-2700
23
VSWR
Max.
*Coupling
Value (dB)
IMD
(2x43 dBm)
dBc
1.20:1
5.0 ± 0.80
<-155
Average
Peak
Power
Power
(Watts) (KWatts)
100
3
*Coupling value includes dissipative loss and frequency variation
Soon available <-160 dBc
with DIN Connectors
Interface & Environmental Specifications
Interface
N female
Inner contact plating
Silver
Outer contact plating
Tri-metal
Indoor application
Outdoor application
IP64, passivated
aluminum
IP67, painted
Dimensions are in Millimeters [Inches]
To receive complete technical specification or related application
notes please forward your request to: sales@sdptelecom.com
 SDP TELECOM Inc. (Canada)
 SDP TELECOM (India) Pvt. Ltd. (India)
 SDP TELECOM (Suzhou) Ltd. (China)
3x3 CM (13-04) Rev D
1725 Trans-Canada Highway, Dorval, Québec H9P 1J1, Canada Tel.: +1(514) 421 5959 Fax: +1(514) 421 3171
OZ-11/4, SIPCOT Industrial Park, Electronic Hardware (Hi-Tech) SEZ, Oragadam,
Sriperumbudur Taluk, Kanchipuram - 603109, Tamil Nadu, India
Tel.: +91 44 30 45 00 00 Fax: +91 44 30 45 00 99
中国江苏省苏州市工业园区星龙街428号苏春工业坊17B, C, 邮政编码：215021
电话：+86 512 62836108
传真：+86 512 62836208
® © All information contained within this product datasheet is proprietary and is considered copyright of SDP Telecom.
Specifications subject to change without notice.
SDP 3x3 hybrid combiner is used to combine three wireless carriers.
The 3x3 hybrid
combiner can combine up to three inputs into any of the three outputs with minimal interaction
& IMD; essentially providing lossless combining. Any unused ports must be terminated
with low IMD terminations (not included, see SDP low IMD termination datasheet) with
suitable IMD requirement and power level. Connectors are available with alternate genders.