INDUSTRIAL LUBRICANTS

industrial lubricants
Fuel & lubricant SpecialiStS
industrial lubricants
the Goldline range of industrial lubricants has been designed to meet the challenges of modern manufacturing
processes. Our comprehensive range of industrial lubricants, fluids and greases combine carefully selected base oils with
state-of-the-art additives to ensure we remain at the forefront of advances in lubricant technology. Selection of the
right lubricant is paramount to component life and our experienced technical department are on hand to advise and
can conduct comprehensive site surveys. by actively monitoring the condition of the lubricant, our Fluid Management
System can help eliminate unforeseen breakdowns, reduce downtime and extend the life of components.
HYDRAULIC OILS
ULTRA VHVI RANGE
15, 22, 32, 46, 68, 100
(MinEral Oil)
High viscosity index hydraulic fluids with multigrade
characteristics. Suitable for applications where wide temperature
variations may exist or where rationalisation of grades is desired.
Din 51524 part 3, iSO 6743/4, Din 51517 part 3, SperrY VicKerS M2950-S, i-286-S, pOclain Spec - MeetS reQuireMentS
HPX RANGE
HPX WG
(WatEr GlYcOl – FirE rEsistant)
A fire resistant fluid of the water glycol type (HFC) for use
where mineral oil based fluids are likely to present a fire hazard.
This type of fluid relies on the water content to aid its fire
retardant properties and therefore should be checked regularly.
The hydraulic circuit should be specifically designed for this type
of fluid.
MeetS Or eXceeDS tHe reQuireMentS OF: SpraY iGnitiOn teStS
(c.e.c. luXeMbOurG 7tH repOrt, FactOrY Mutual, iSO15029),
FactOrY Mutual - HOt cHannel iGnitiOn teSt, iSO14935 FluiD
SOaKeD WicK teSt
3, 5, 10, 15, 22, 32, 46, 68, 100, 150, 220, 320, 460
(MinEral Oil)
A range of premium quality hydraulic fluids for heavy duty
applications. containing anti-oxidant, anti-foam, anti-rust, and a
high level of anti-wear additives.
HPX BIO RANGE
Din 51524 part 2 cateGOrY Hlp, iSO 6743/4 cateGOrY HM, DeniSOn
HF-2, tp-02100 FilterabilitY teSt, SperrY VicKerS M-2950-S, i-286-S,
aFnOr nF e 48-600, tHYSSen tH n-256132, uS Steel 127, Seb 181.222,
VDMa 24318
biODeGraDabilitY > 98% (cec-l-33-t-82)
ZF HPX RANGE
5, 10, 15, 22, 32, 46, 68, 100, 150
(Zinc FrEE)
the Goldline ZF HpX range of zinc free (ash free) high
performance hydraulic oils have been formulated for use in
hydraulic systems containing sliver plated bearings and machine
tool lubrication systems with high tolerance precision plain
journal bearings where zinc containing additives are not desired.
also ideal for machine tool applications where contact with the
metalworking fluid can occur.
Din 51524 part 2, SperrY VicKerS i-286-S, aFnOr nFe 48603 (HM)
32, 46, 68
(VEGEtablE Oil)
the Goldline biohyd range are readily biodegradable
environmentally friendly hydraulic oils.
SE BIO 46
(sYntHEtic EstEr)
Goldline Se biO 46 is an environmentally friendly synthetic ester
based biodegradable hydraulic fluid. Its anti-oxidation properties
and resistance to gumming allow extended service life compared
with more conventional biodegradable fluids.
eurOpean ecOlabel, iSO 15380 HeeS, SWeDiSH StanDarD SS 15 54
34, DeniSOn HF-2, HF-6, MeetS tHe reQuireMentS OF StanDarDS
OecD 201, 202 & 203 FOr ecOtOXicitY anD OecD 301b FOr biODeGraDabilitY.
INDUSTRIAL GEAR LUBRICANTS
SYNGEAR PAO RANGE
32, 46, 68, 100, 150, 220, 320, 460, 680
(FullY sYntHEtic)
Synthetic, high performance gear lubricants designed to
operate in extreme conditions whilst maintaining optimum
component and lubricant life. they are precisely formulated from
polyalphaolefin base fluids and specially selected EP (Extreme
pressure) additives. they contain a carefully balanced state of
the art additive system which helps to protect against scuffing
and reduce fatigue related failures such as micropitting.
Din 51517 part 3, aGMa 9005-D94, uS Steel 224, DaViD brOWn
S1.53.101(e)
SYNGEAR PAG RANGE
150, 220, 320, 460
(FullY sYntHEtic)
a range of fully synthetic, high quality gear oils typically used with
worm gears found in a variety of industrial equipment. these
products are manufactured using specially selected polyalkylene
glycol base oils and additives which combine to produce ultralong lasting products. they offer outstanding high temperature
protection and are ideally suited to highly stressed, high speed
applications.
Din 51517 part 3, DaViD brOWn tYpe G
EP RANGE
68, 100, 150, 220, 320, 460, 680
(MinEral Oil)
a range of heavy duty gear oils for industrial enclosed gear
sets with circulation or splash feed lubrication systems. these
oils contain a high level of anti-wear and anti-foam properties
together with a fully oxidation inhibited extreme pressure
additive. Benefits include excellent water shedding properties,
thermal stability, reduced tooth wear and extended service life.
Din 51517 part 3, uS Steel 224, aGMa 250.04,9005-D94,
DaViD brOWn S1.53.104
COMPRESSOR OILS
SYNAIR PAO RANGE
32, 46, 68, 100, 150
(FullY sYntHEtic)
the Goldline Synair paO range of compressor oils is blended
using high viscosity index synthetic base oils, synthetic ester and
selected additives to provide long term protection and reliability.
The new generation formulations using compressor specific
chemistry enables oil drain intervals of up to 8000 hours to be
achieved.
Din 51506 VD-l, Din 51524 part 2, aFnOr nFe 48-603 (HM), SperrY
VicKerS i-286-S, cincinnati MilacrOn p-68
COMP EST RANGE
32, 46, 68
(sYntHEtic EstEr)
Fully synthetic ester based compressor lubricants designed
to meet the requirements of modern, variable speed screw
compressors. Far superior to conventional oils and capable of
drain periods of up to 8000 hours.
Din 51506 VD-l, Din 51352 part 2
CYCLONE 4000 RANGE
32, 46, 68, 100
(MinEral Oil)
premium quality, low carbon forming compressor oil
which allows for drain periods of 4000 hours to be achieved.
Din 51506 VD-l
CYCLONE RANGE
32, 46, 68, 100, 150
(MinEral Oil)
Mineral oil based compressor oil which typically allows for 2000
hour drain intervals assuming excessive temperatures are not
encountered.
Din 51506 VD-l
FRIGO RANGE
32, 46, 68
(MinEral Oil)
a range of mineral oil based refrigeration compressor oils
suitable for use in a variety of domestic and industrial refrigerant
compressors. Goldline Frigo grades have low pour points and
are compatible with a number of different refrigerant gases.
bS 2626/1975
OTHER INDUSTRIAL
LUBRICANTS
MICRON GP RANGE
5, 10, 15, 22, 32, 46, 68, 100, 150, 220, 320, 460, 680
(MinEral Oil)
High quality straight paraffinic type mineral oils suitable for
most general purpose machine applications. the higher viscosity
grades may be used for circulating systems, bearings and many
gearbox applications not working under extreme pressure (ep)
conditions.
iSO Oil tYpe HH
SLIDEWAY RANGE
32, 46, 68, 100, 150, 220
(MinEral Oil)
a range of machine tool lubricants designed to give optimum
performance on slideways and machine beds thus eliminating the
stick slip often associated with poor component surface finish
and vibration whilst resisting the problems of wash off by soluble
coolant.
THERME HT RANGE
22, 32, 46
(MinEral Oil)
A range of highly refined heat transfer oils. Maximum
temperature for closed systems with a header tank is 310°c and
for open systems 190°c.
TURBINE TRN RANGE
32, 46, 68, 100, 150, 220
(MinEral Oil)
a range of exceptional quality turbine lubricants manufactured
from the highest quality solvent refined mineral base oil fortified
with a proprietary turbine oil additive. the state of the art
additive system offers outstanding protection against oxidation,
gives long-term corrosion protection, and helps retain good oil
demulsibility in the presence of water.
DeniSOn HF-1, cincinnati MilacrOn p-38, p-45, p-54, p-55, p-57, & p-62,
Din 51524 part 1 & 51515 part 1: l-tD, iSO 6743-5 l-tSa/l-tGa, bS 489,
uS Steel 120 & 126, MilitarY Mil-l-17672 c, aFnOr e-48600 Hl, SieMenS
tlV 901304, brOWn bOVeri HtGD 90117
GREASE
SYNTHETIC HIGH TEMP 2
(sYntHEtic basEd)
Synthetic based, industrial bearing grease with an operating
temperature range up to 600°c. exceptional anti-wear,
anti-corrosion and extreme pressure (ep) properties.
MOLY 2
(litHiuM/MOlYbdEnuM sOaP)
Goldline Moly 2 grease is manufactured from a lithium soap
base and highly refined mineral oil, with added molybdenum
disulphide to provide protection against seizure in conditions
when ordinary greases would fail.
nlGi 2.
ANTIFREEZE
LONGLIFE RED ANTIFREEZE
(EtHYlEnE GlYcOl basEd)
Goldline longlife red antifreeze is an ethylene glycol based
concentrate, which uses Organic acid inhibitor technology and
is suitable for all year round usage. When used at the correct
concentration, effective corrosion protection can be guaranteed
for up to 5 years.
aStM D3306, aStM D 4985, Sae J 1034, bS 6580 (1992), aFnOr nF r15601*, FFV HeFt r443, cuna nc 956-16, une 26361 88, JiS K 2234*, natO S
759 (* WitH tHe eXceptiOn OF reSerVe alKalinitY)
BLUE MEG ANTIFREEZE
nlGi 2.
OPEN GEAR LUBRICANT
(aluMiniuM cOMPlEX sOaP)
an aluminium complex soap thickened grease specially
developed for the lubrication of all types and sizes of open gears,
including spur, helical and bevel drive gears that are subjected to
extreme loads, high working temperatures and water saturated
conditions.
nlGi 2.5.
(MOnOEtHYlEnE GlYcOl basEd)
Goldline blue Meg antifreeze is a universal engine coolant,
suitable for all year round usage. it is manufactured from pure
monoethylene glycol, anti-corrosion additives and inhibitors.
aStM D 3306, aStM D 4985, Sae J 1034, bS 6580 (1992)
ANCILLARY PRODUCTS
n
COMPLEX HP2
n
(litHiuM cOMPlEX sOaP)
Multi-purpose lithium complex grease for lubricating all
anti-friction and plain bearings. exceptional performance over a
wide operating temperature range.
nlGi 2.
n
n
n
n
n
n
FUSION RANGE
n
EP1, EP2, EP3
(litHiuM sOaP)
a high quality lithium soap grease for use in anti-friction & plain
bearings subject to high load.
nlGi 1, 2, 3.
FUSION SEMI-FLUID RANGE
EP0, EP00, EP000
(litHiuM sOaP)
Semi fluid lithium soap thickened greases recommended for use
in autolube systems and certain enclosed gearboxes.
n
n
n
Degreaser
Vacuum pump Oil
air tool Oil
Mould release Oil
corrosion preventatives
Flushing Oil
aerosol Sprays
Metalworking Fluids
bunded tanks for lubricating Oil, Waste Oil & Fuel Stations
Oil Sampling & Diagnostic Services
Spill control Kits & Oil absorbent Granules
Workshop equipment including pumps,
Grease Guns & Hose reels
lubricants aVailablE in tHE FOllOWinG siZEs
1 litrE | 5 litrE | 25 litrE | 205 litrE | bulK
indulf House
lintmill
uK
ab56 4XQ
tel: +44 (0)1542 832465
Fax: +44 (0)1542 833550
email: sales@nor thernoils.co.uk
www.northernoils.co.uk
n
n
n
n
n
Design & print: www.mms-almac.co.uk
nlGi 0, 00, 000.