LP Gas Catalog (Form H-0506)

Transcription

LP Gas Catalog (Form H-0506)
LP Gas Hose Reels
| Home Delivery Trucks | Dispensing Systems | Fueling Vehicles |
| Filling Stationary and Portable Cylinders |
You Can’t Buy
A Better Reel.
Family owned and operated since 1933
C
LP GAS HOSE REELS
G
CONTENTS
Hannay hose reels come in all sizes and capacities.
H
LP Gas Hose Reels
I.D. Hose Sizes
Page
Hannay Reels Policies – Our Guarantee, Service Policy,
Paint Notice, Return Goods Policy
3
Manual or Power Rewind Reels
Series PB/DPB
1" – 1-1/2"
4-5
1" – 1-1/2"
6-7
Power Rewind Reels
Series PBGMB/PBGMT
Power Rewind Liquid Reel with Manual Rewind Vapor Reel
Series PBM
Liquid
Vapor
Spring Rewind Reels
Series SPBN800/SPB800
Accessories
Hannay Reels Spec Worksheet
X
1" – 1-1/2"
1/2" – 1"
8
3/4" or 1"
9
10
11
A
F
Y
D
Only one reel sets the standard
in the propane delivery industry.
Our reels are created specifically for fuel delivery applications –
never retrofitted to the job – so you can expect superior fit
and function. We offer thousands of standard reels – or can
create custom designs – that are built strong to last long,
require minimal maintenance, and provide a lifetime of value.
Often outlasting the vehicles they’re on, our reels provide
safer operation with:
Note to Designers and Engineers
The reels shown in this catalog are the standard of
the industry.
These models reflect various installation and performance
requirements.
The high quality of our standard steel construction is only
the beginning.
Hannay Reels offers any size configuration to fit a defined
space, and we construct many models of reels of aluminum
or stainless steel. Specifically, we use 5000 and 6000
Series aluminum and 304 stainless steel in the manufacture
of frames, discs, drums, and internals as well as other
structural components. This type of construction eliminates
the need for maintenance repainting and part replacement
due to rust or corrosion.
• Non-sparking ratchet assemblies
• Explosion-proof motors
• Suspended IV reels that allow access on either side
of the vehicle
All Hannay LP Gas reels are handcrafted and available in
aluminum, stainless steel, e-coated, and painted steel for
superior protection against contamination and corrosion
in sensitive or caustic environments.
Uses:
• Home delivery vehicles
• Fueling vehicles
• Dispensing systems
• Filling stationary and
portable cylinders
Please consult factory on any fuel handling questions.
For the many accessories and components available on our
standard reel models such as roller guides, switches, brakes
and locks, etc., please refer to our Ordering & Accessory
Guide H-0415-OA.
2
Hannay Reels, Inc.
Phone: 518-797-3791
Toll Free: 1-877-467-3357
Mounting Hole Sizes
N Series Reels
Pressed Frame Reels and
Channel Framed Reels
Domestic FAX: 1-800-733-5464
International FAX: 518-797-3259
7/16" wide x 7/8" long slot
running front to back
7/16" wide x 7/8" long slot
running left to right
hannay.com
reels@hannay.com
E
Y
D
LP GAS HOSE REELS
Hannay Reels Sales Policies
Our Guarantee and Service Policy - 2 Year Warranty
Equipment manufactured by Hannay Reels, Inc. is guaranteed
for 2 years from date of shipment when installed according
to our instructions, given proper care, and used for the purpose
for which it is designed.
Equipment which proves to be defective upon our inspection
will be replaced free of charge, including freight to the customer.
Our responsibility ceases upon delivery to any common carrier
and we do not, unless previously instructed, insure shipments
beyond point of delivery to such carrier. No material will be
accepted for return without a return goods authorization. No
allowance will be made for labor charges incurred in making
exchanges, replacements or repairs.
Components (including hose and cable) which are manufactured
by other vendors will be subject to the warranty terms of their
own manufacturers.
Also excluded from the general guarantee are normal wear items
(including seals, motor brushes, and paint finish).
We reserve the right to modify or alter materials, dimensions,
design, and construction when necessary to improve the
performance of the reel and/or accessories, or to meet
delivery requirements.
Failure to use a properly sized circuit breaker with any
electric rewind motor will void warranty on motor.
Failure to use a flexible connector with any live hose
reel will void warranty on swivel joint.
We expressly disclaim any liability for damage or injuries
resulting from the use, operation, service, maintenance
or failure of equipment.
Notice on Reel Finish
Standard finish on Hannay reels is a high performance modified
acrylic enamel paint. Standard color is metallic graphite. Other
colors available at no additional cost include red, white, black,
and primer.
Most of the major components on standard reels are e-coated
prior to receiving final topcoat paint finish. This combination of
e-coat and enamel topcoat will meet the finish requirements of
most customer applications and environments.
In cases where requirements cannot be met with the standard
finish, Hannay Reels can coat any model reel with an automotive
primer, allowing application of final coating at your facility.
Alternatively, Hannay Reels can provide a quote for matching a
customer-provided paint specification. For further information,
please contact your Hannay Reels sales engineer and a special
paint request form will be sent to you.
For environments where no paint finish is suitable, we offer both
aluminum and stainless steel (304 grade) construction on most
reel models.
Return Goods Policy
All Hannay reels are built to order. The parts and components
are ordered or placed into production as soon as the order
is written.
In order to keep the number of returned goods at a minimum,
we ask that you use the Hannay Reels Spec Worksheet
and/or Accessory Order Form when specifying reels with us.
Be sure to include any size and/or weight limitations
for your installation.
In the event that an item does need to be returned for credit,
repair or replacement, prior approval must be obtained from
Hannay Reels, Inc. Upon your request, we will fax a Return
Goods Authorization form. A signed copy of this form must
accompany the material when returned to us.
hannay.com
reels@hannay.com
All material must be returned prepaid, unless otherwise noted
on our Return Goods Authorization. No return will be accepted
that has been damaged due to improper return packaging,
tampered with or altered from its original condition. Equipment
specially built to customer specifications and requirements is
not subject to cancellation or returnable for credit under any
conditions.
Our restocking and handling fee is a MINIMUM of 25% for
standard catalog reels and parts.
No material will be accepted for credit when returned without
permission. Orders for equipment incorporating variations from
catalog listed items are special and are not subject to return.
No allowance will be made for labor or mileage charges
incurred in making exchanges, replacements or repairs.
Phone: 518-797-3791
Toll Free: 1-877-467-3357
Domestic FAX: 1-800-733-5464
International FAX: 518-797-3259
Hannay Reels, Inc.
3
C
MANUAL OR POWER REWIND
G
SeriesPB/DPB
H
To handle single 1" through 1-1/2" I.D. hose.
• Standard hose reel is steel construction, painted graphite.
Aluminum or stainless steel construction is available.
• “SB” prefix denotes polished aluminum construction, offering
both reduced weight and superior corrosion resistance
compared to standard steel construction.
• Series PB are explosion-proof reels.
• Series DPB reel is direct hydraulic drive, eliminating the use of
chain and sprockets.
X
Y
A
D
• Choose gear-driven crank rewind, #40 chain and sprocket drive
powered by an electric, hydraulic or compressed air motor or
direct drive hydraulic rewind motor.
• Crank rewind reels and direct drive reels supplied with
pinion brake.
• Power rewind reels (chain and sprocket driven) supplied with a
strap brake. Other brake and locking devices may be specified.
F
E
• Standard inlet: 90° ball bearing swivel joint, 1-1/2" female
NPT threads.
• Standard outlet: flanged riser, 1" female NPT threads.
Standard inlet, outlet riser, and hub assembly are steel.
Series PB
Electric rewind shown
• Other sizes and/or threads can be furnished and must
be specified.
• Pressures to 350 psi (24 bar).
• Temperatures from -40°F to +350°F (-40°C to +177°C).
• Consult factory for other pressures and temperatures.
• Chain guard available upon request, must be specified.
• Rollers and roller mounting brackets are accessory items.
Specify roller position.
Series DPB
Direct drive hydraulic rewind shown
with optional Assembly C rollers
4
Hannay Reels, Inc.
Phone: 518-797-3791
Toll Free: 1-877-467-3357
Domestic FAX: 1-800-733-5464
International FAX: 518-797-3259
hannay.com
reels@hannay.com
Y
D
MANUAL OR POWER REWIND
Series PB/DPB
PARTS DRAWING: A
LUM. CONST. PRESSED FRAME – ISO 202; ALUM. SQUARE TUBE FRAME – ISO 204;
STEEL CONST. PRESSED FRAME – ISO 18
Model
Number
For Power
Rewind
see Note 4
Hose Capacity
of Reel
feet m
Approx. Weight
Power Rewind
lb. kg
Steel
Reel Dimensions***
in. mm
Alum.
I.D. in.
mm
1
25
1-1/2
38
O.D. in.
mm
1.5
38
2.16
55
NET
SHIP
NET
SHIP
125
38
150
46
150
46
200
61
250
76
200
61
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
50
15
75
23
100
30
142
64
155
70
155
70
163
74
158
71
157
71
160
64
173
78
173
78
184
83
197
89
197
89
205
93
208
94
207
94
202
91
215
97
215
97
119
54
124
56
137
62
157
71
130
59
146
66
133
60
159
72
140
63
160
72
165
75
178
81
198
90
175
79
194
89
174
79
200
91
185
84
PB24-23-24
PB30-23-24
PB26-25-26
PB28-25-26
PB22-30-31
PB18-33-34
PB24-25-26-15.5
PB28-25-26-15.5
PB26-30-31-15.5
A
B
C
D
E
21
533
27.5
699
23
584
25.5
648
19
483
14.5
368
21
533
25.5
648
23
584
15.5
394
22
559
17.5
445
20
508
13.5
343
9.5
241
15.5
394
20
508
17.5
445
10.5
267
10.5
267
10.5
267
10.5
267
10.5
267
10.5
267
15.5
394
15.5
394
15.5
394
20.5
521
20.5
521
25.5
648
25.5
648
25.5
648
31.5
800
25.5
648
25.5
648
25.5
648
22.75
578
22.75
578
24.75
629
24.75
629
28.75
730
31.75
806
24.75
629
24.75
629
28.75
730
Notes:
POWER
F
DIRECT
DRIVE
HYD
F
G
H
X
Y
29.25
743
35.75
908
31
787
33.75
857
27.25
692
23.75
603
29.25
743
33.75
857
31.25
794
35.12
892
41.62
1057
37
940
39.62
1006
33.12
841
29.12
740
–
–
–
–
–
–
23.5
597
23.5
597
27.88
708
27.88
708
29.88
759
33.62
854
27.88
708
27.88
708
29.88
759
12.12
308
12.12
308
15.5
394
15.5
394
15.5
394
17.75
451
15.5
394
15.5
394
15.5
394
13
330
19.5
495
15
381
17.5
445
11
279
7
178
13
330
17.5
445
15
381
16.75
425
16.75
425
21.75
552
21.75
552
21.75
552
27.75
705
21.75
552
21.75
552
21.75
552
B
1. S
pecifications subject to change.
E
2. Upon request, reels can be supplied with drum lengths other than
shown and with disc sizes in other diameters.
3. Dimensions shown for reels up to and including 30-31 disc size
reflect pressed frames. Reel sizes ending in (33-34) are built with
rollform/square tubing construction.
4. W
hen ordering power rewind models, prefix model number with:
A = Air Rewind–Supplied with control valve and 25" air hose.
E =Explosion-Proof Electric Rewind (2/3 HP) – Supplied with
explosion-proof switch, solenoid, and junction box.
HD =Hydraulic Rewind–Not supplied with control valve.
D = Direct Drive Hydraulic Rewind–Not supplied with control valve.
5. Be sure to check dimensions and weights prior to ordering.
C
G
NOTICE: A flexible connector must be used between the inlet pipe and
the inlet swivel joint.
***X, Y indicate mounting holes.
H
X
Y
A
D
F
Series EPB
E
B
C
G
H
X
Y
D
A
F
Series DPB
hannay.com
reels@hannay.com
Phone: 518-797-3791
Toll Free: 1-877-467-3357
Domestic FAX: 1-800-733-5464
International FAX: 518-797-3259
Hannay Reels, Inc.
5
C
POWER REWIND
G
Series PBGMB/PBGMT
H
To handle single 1" or 1-1/2" I.D. hose.
• Standard hose reel is steel construction, painted graphite.
Aluminum or stainless steel construction is available.
• “SB” prefix denotes polished aluminum construction, offering
both reduced weight and superior corrosion resistance
compared to standard steel construction.
Both Series
• Choose #40 chain and sprocket drive powered by an electric,
hydraulic or compressed air motor or direct drive hydraulic
rewind motor.
X
Y
A
D
• Auxiliary crank rewind standard on Series DPB reels.
Available on Series PB power rewind reels, at extra cost.
• Direct drive hydraulic rewind reels supplied with pinion brake.
Electric powered rewind reels supplied with a strap brake.
• Other brake and locking devices may be specified.
(See Ordering & Accessory Guide.)
F
Series PBGMB with
Bottom-Mounted Guidemaster
• Standard inlet: 90° ball bearing swivel joint,
1-1/2" female NPT threads.
Electric rewind shown
• Standard outlet: flanged riser, 1" female NPT threads.
• Standard inlet, outlet riser, hub assembly are steel.
• Other sizes and/or threads can be furnished and must
be specified.
• Pressures to 350 psi (24 bar).
• Temperatures from -40°F to +350°F (-40°C to +177°C).
• Consult factory for other pressures and temperatures.
• Chain guard available upon request, must be specified.
• Refer to page 10 for more information on Guidemasters shown.
Series PBGMB
• The Assembly B bottom wind roller is standard.
Optional Guidemaster EPS-1 Switch Cover
Hannay Part No. 9917.0201. This
cover is designed to protect against
moisture and other contaminants and
has a durable lanyard to keep the cover
securely attached to the switch body.
Series PBGMT with
Top-Mounted Guidemaster
Standard configuration,
electric rewind shown
6
Hannay Reels, Inc.
Phone: 518-797-3791
Toll Free: 1-877-467-3357
Domestic FAX: 1-800-733-5464
International FAX: 518-797-3259
hannay.com
reels@hannay.com
E
Y
D
POWER REWIND
Series PBGMB/PBGMT
PARTS DRAWING: BOTH SERIES PBGMB and SERIES PBGMT – ISO 202, 204 and ISO 195, 200
Model
Number
For Power
Rewind
see Note 3
Hose Capacity
of Reel
feet m
I.D. in.
mm
1
25
O.D. in.
mm
1.5
38
125
38
150
46
150
46
200
61
250
76
200
61
125
38
150
46
150
46
200
61
250
76
200
61
PBGMB 24-23-24
PBGMB 30-23-24
PBGMB 26-25-26
PBGMB 28-25-26
PBGMB 22-30-31
PBGMB 18-33-34
PBGMT 24-23-24
PBGMT 30-23-24
PBGMT 26-25-26
PBGMT 28-25-26
PBGMT 22-30-31
PBGMT 18-33-34
Approx. Weight
Power Rewind
lb. kg
NET
SHIP
160
73
170
77
185
84
191
87
188
85
175
79
168
76
178
81
193
88
181
82
196
88
183
83
185
84
200
91
215
98
221
100
238
108
225
102
193
88
208
94
223
101
211
96
246
112
233
106
Reel Dimensions***
in. mm
A
B
D
21
533
27.5
699
23
584
25.5
648
19
483
14.5
368
21
533
27.5
699
23
584
25.5
648
19
483
14.5
368
15.5
394
22
559
17.5
445
20
508
13.5
343
9.5
241
15.5
394
22
559
17.5
445
20
508
13.5
343
9.5
241
20.5
521
20.5
521
25.5
648
25.5
648
25.5
648
31.5
800
20.5
521
20.5
521
25.5
648
25.5
648
25.5
648
31.5
800
E
F
F
POWER
DIRECT
DRIVE
HYD
G
22.75 29.25 35.12 23.5
578
743
892
597
22.75 35.75 41.62 23.5
578
908
1057
597
24.75 31.25 37.12 27.88
629
794
943
708
24.75 33.75 39.62 27.88
629
857
1006
708
28.75 27.25 33.12 29.88
730
692
841
759
31.75 23.75 29.12 33.62
806
603
740
854
22.75 29.25 35.12 29.5
578
743
892
749
22.75 35.75 41.62 29.5
578
908
1057
749
24.75 31.25 37.12 32.88
629
794
943
835
24.75 33.75 39.62
33
629
857
1006
838
28.75 27.25 33.12 36.13
730
692
841
918
31.75 23.75 29.12 33.62
806
603
740
854
H
J
K
L
12.12
49
36.75
30
308
1245
933
762
12.12
49
36.75 36.75
308
1245
933
933
15.5 47.75 37.75
31
394
1213
959
787
15.5 47.75
39
34.75
394
1213
991
883
15.5 52.25 35.75
29
394
1327
908
737
17.75 56.75 33.5 26.75
451
1441
851
679
12.12
33
36.75
30
308
838
933
762
12.12
33
40.62 36.75
308
838
1032
933
15.5 33.25 37.75
31
394
845
959
787
15.5
34
39
34.75
394
864
991
883
15.5
35.5 35.75
29
394
902
908
737
17.75
37
38.38 26.38
451
940
975
670
Notes:
M
X
Y
–
–
–
–
–
–
–
–
–
–
–
–
31.5
800
31.5
800
37.25
946
35
889
42.5
1080
44.75
1137
13
330
19.5
495
15
381
17.5
445
11
279
7
178
13
330
19.5
495
15
381
17.5
445
11
279
7
178
16.75
425
16.75
425
21.75
552
21.75
552
21.75
552
27.75
705
16.75
425
16.75
425
21.75
552
21.75
552
21.75
552
27.75
705
J
1. S
pecifications subject to change.
B
E
2. Upon request, reels can be supplied with drum lengths
other than shown and with disc sizes in other diameters.
3. When ordering power rewind models, prefix model
number with:
C
10.5
267
A= Air Rewind–Supplied with control valve and 25" air hose.
E=Explosion-Proof Electric Rewind (2/3 HP)–Supplied with
explosion-proof switch, solenoid, and junction box.
HD=Hydraulic Rewind–Not supplied with control valve.
D=Direct Drive Hydraulic Rewind–Not supplied with
control valve.
G
H
X
A
4. D
imension “J” is maximum, with Guidemaster in operating
position. Dimension “K” is maximum, with Guidemaster
in traveling position opposite rewind motor, as shown in
dimensional drawing.
Y
D
F
K
L
Series PBGMB
Dimension “L” is maximum, with Guidemaster in traveling
position on same side as rewind motor.
5. Guidemaster weight is approximately 21 lbs. Guidemasters
are shipped as parts.
J
B
E
6. Be sure to check dimensions and weights prior to ordering.
7. Consult factory for reels using 1-1/2" I.D. hose.
NOTICE: A flexible connector must be used between the
inlet pipe and the inlet swivel joint.
***X, Y indicate mounting holes.
M
G
C
10.5
267
H
Y
D
X
A
F
K
L
Series PBGMT
hannay.com
reels@hannay.com
Phone: 518-797-3791
Toll Free: 1-877-467-3357
Domestic FAX: 1-800-733-5464
International FAX: 518-797-3259
Hannay Reels, Inc.
7
C
G
POWER REWIND LIQUID REEL WITH MANUAL REWIND VAPOR REEL
Series PBM
H
To handle 1" through 1-1/2" I.D. liquid hose and 1/2" through 1" I.D. vapor hose.
• Standard hose reel is steel construction, painted graphite.
Aluminum or stainless steel construction is available.
• “SB” prefix denotes polished aluminum construction, offering both
reduced weight and superior corrosion resistance compared to
standard steel construction.
• Gear-driven crank on vapor reel.
• #40 chain and sprocket drive powered by an electric,
hydraulic or compressed air motor liquid reel.
X
Y
• Pinion shaft brake standard.
• Other locking devices may be specified.
• Standard inlet: 90° ball bearing swivel joint, 1-1/2" female NPT threads.
A
D
• Manual rewind reel: 1" female NPT 90° ball bearing swivel joint.
• Liquid reel: flanged riser, 1" female NPT threads.
• Vapor reel: riser, 1" female NPT threads.
F
• Standard inlet, outlet riser, and hub assembly are steel.
Series PBM
• Other sizes and/or threads can be furnished and must be specified.
Top wind configuration,
electric rewind shown
• Rollers and roller mounting brackets are accessory items.
Specify roller position.
• Pressures to 350 psi (24 bar).
• Temperatures from -40°F to +350°F (-40°C to +177°C).
• Consult factory for other pressures and temperatures.
• Chain guard available upon request, must be specified.
PARTS DRAWING – ISO 123
Model
Number
For Power
Rewind
see Note 3
Approx.
Weight
lb. kg
Hose Capacity of Reel
feet m
Liquid Reel
Vapor Reel
I.D. in.
mm
1
25
1/2
13
3/4
19
1
25
O.D. in.
mm
1.5
38
.94
24
1.26
32
1.5
38
125
38
150
46
200
61
175
53
175
53
225
69
80
24
80
24
100
30
75
23
75
23
75
23
PBM 24-16-23-24
PBM 30-16-23-24
PBM 28-16-25-26
Reel Dimensions***
in. mm
NET
SHIP
256
116
264
120
267
121
286
130
294
133
297
135
A
B
B1
D
E
32
813
38.5
978
36.5
927
15.5
394
22
559
20
508
7.5
191
7.5
191
7.5
191
23.75
603
23.75
603
25.5
648
23
584
23
584
24.75
629
F
G
H
X
Y
46.25
1175
52.75
1340
50.75
1289
23.88
607
23.88
607
25.88
657
12.5
318
12.5
318
13.5
343
24.5
622
31
787
29
737
20
508
20
508
21.75
552
POWER
Notes:
2. Upon request, reels can be supplied with drum lengths other than shown
and with disc sizes in other diameters.
3. When ordering power rewind models, prefix model number with:
6.5
165
6.5
165
C
10.5
267
A =Air Rewind–Supplied with control valve and 25" air hose.
E =Explosion-Proof Electric Rewind (2/3 HP)–Supplied with
explosion-proof switch, solenoid, and junction box.
HD =Hydraulic Rewind–Not supplied with control valve.
4. Be sure to check dimensions and weights prior to ordering.
NOTICE: A flexible connector must be used between the inlet pipe and the
inlet swivel joint.
Hannay Reels, Inc.
G
H
Y
D
X
A
F
***X, Y indicate mounting holes.
8
E
B
B1
1. S
pecifications subject to change.
Phone: 518-797-3791
Toll Free: 1-877-467-3357
Domestic FAX: 1-800-733-5464
International FAX: 518-797-3259
hannay.com
reels@hannay.com
E
SPRING REWIND
SeriesSPBN800/SPB800
To handle 3/4" or 1" I.D. hose.
• Standard hose reel is steel construction, painted graphite.
Stainless steel construction is available.
• SPB800 only: Aluminum construction is also available. “SB” prefix denotes
polished aluminum construction, offering both reduced weight and superior
corrosion resistance compared to standard steel construction.
• Rollformed frame for heavy-duty applications must be specified.
• Non-sparking ratchet locks reel.
Y
• Declutching arbor to prevent damage from reverse winding.
D
• Other sizes and/or threads can be furnished and must be specified.
• Standard inlet: 90° ball bearing swivel joint, 1" female NPT threads.
• Standard outlet: 1" female NPT threads.
Series SPBN800
Series SPB800
Top wind configuration
shown
• Pressures to 350 psi (24 bar).
Standard configuration
shown
• Temperatures from -40°F to +350°F (-40°C to +177°C).
• Consult factory for other pressures and temperatures.
• Supplied 4-way roller assembly. Specify roller position.
PARTS DRAWING: SERIES SPBN800 – ISO 81; SERIES SPB800 – ISO 42
Approx.
Weight
lb. kg
Hose Capacity of Reel
feet m
Model
Number
Delete Prefix N for
Rollformed Frame
I.D. in.
mm
1/2
13
3/4
19
1
25
O.D. in.
mm
.94
24
1.25
33
1.5
40
35
11
50
15
65
20
60
18
110
34
75
23
75
23
25
8
50
15
60
18
70
21
75
23
85
26
100
30
15
5
25
8
35
11
50
15
40
12
75
23
100
30
SPBN816-19-20-10.5J
SPBN816-23-24-10.5J
SPBN816-25-26-10.5B
SPBN818-25-26-10.5B
SPB816-30-31-15.5G
SPB820-25-26-10.5A
SPB820-30-31-15.5A
Roller
Assy
Supplied
on Std.
NET SHIP Models
75
34
87
39
96
44
102
46
124
56
131
59
137
62
98
44
116
53
131
59
137
62
159
72
166
75
172
78
N204
N204
N204
N206
R204
R308
R308
Reel Dimensions***
in. mm
A
N/A
B
9.25
235
9.25
235
9.25
235
11.25
286
9.25
235
13.25
337
13.25
337
8
203
8
203
10
254
12
305
–
–
–
–
–
–
4
102
4
102
4
102
6
152
4
102
8
203
8
203
C
D
E
N/E
F
N/F
G
10.5 18 19.5 20.75 15.5 14 19.75
267 457 495 527 394 356 502
10.5 23.25 24.38 23.75 15.5 14 23.88
267 591 619 603 394 356 607
10.5 25 26.12 25.25 17.63 15.75 25.88
267 635 663 641 448 400 657
10.5 25 26.12 25.25 19.63 17.75 25.88
267 635 663 641 499 451 657
15.5 28.5 30.5
– 17.63 – 31.88
394 724 775
–
448
–
810
10.5 25
27
– 22.38 – 25.88
267 635 686
–
568
–
657
15.5 28.5 30.5
– 22.38 – 31.38
394 724 775
–
568
–
797
N/G
H
N/H N/X
20 10.38 10.62
508 264 270
24 12.5 12.62
610 318 321
26 13.5 13.62
660 343 346
26 13.5 13.62
660 343 346
–
17
–
–
432
–
–
13.5
–
–
343
–
–
17
–
–
432
–
8
203
8
203
8
203
10
254
–
–
–
–
–
–
X
Y
4.5
114
4.5
114
4.5
114
6.5
165
4.5
114
8.5
216
8.5
216
15
381
20.25
514
22
559
22
559
25.25
641
21.75
552
25.25
641
Notes:
4. B
e sure to check dimensions and weights
prior to ordering.
1. Specifications subject to change.
2. Others sizes, from standard components,
available on request.
NOTICE: A flexible connector must be used
between the inlet pipe and the inlet swivel joint.
3. For optional locations of joint and spring
motor placement – consult factory.
Available Roller
Positions
SR
SR (STD)
(STD)
***X, Y indicate mounting holes.
VR
VR (OPT)
(OPT)
TR
TR (OPT)
(OPT)
TR
TR (Wallmount)
(Wallmount)
E
B
B
C
G
C
G
H
H
N/Y
10
254
N/X
N/A
N/F
N/D
12
305
Series SPBN800 narrow frame
hannay.com
reels@hannay.com
Phone: 518-797-3791
Toll Free: 1-877-467-3357
Y
X
A
D
F
E
Series SPB800 rollformed frame
Domestic FAX: 1-800-733-5464
International FAX: 518-797-3259
Hannay Reels, Inc.
9
C
LP GAS HOSE REELS
G
Accessories
• GM-700 Guidemaster • FH-3 Roller and Spool Assembly
H
GM-700 Guidemaster
GM-700 with EPS-1 switch
Multiposition hose guide with explosion-proof rewind control
Both models help unwind and rewind hose faster, easier, and with less damage to
the hose. Five positive locking positions let the operator pull the hose out and away
from sharp corners of cabinet or deck. An explosion-proof, push-button switch in the
Guidemaster handle lets the operator control the rewind motor as he guides the hose
on the reel in neat, uniform coils.
Construction: Cast aluminum alloy housing, stamped steel pivot plate. Polished aluminum
alloy rollers turn on ball bearings. Stainless steel spring, components, and fasteners are
used in the pivot release mechanism. Six feet of wire is supplied to connect operating
switch to the solenoid. Switch has Class 1 (Groups A, B, C, D) and NEMA 4X ratings.
The Guidemaster can be ordered in 3 ways:
1. Guidemaster only, supplied with 4 mount­ing bolts and ready to be attached
to your mounting brackets.
2. G
uidemaster and brackets, includes steel mounting bracket, beveled spacers,
and fasteners designed for your reel. Ready to install. Specify top- or bottom-wind.
3. Guidemaster mounting brackets factory installed. Specify top- or bottom-wind.
To Order: For factory installation of mounting bracket, Guidemaster should be
ordered when you order the reel.
When purchasing Guidemaster for installation on your present reel, give the
complete model number and serial number of your reel and the complete
part number of the Guidemaster.
Circuit breaker must be used with all DC electric motors.
X
Y
EPS-1 Switch Cover
A
D
F
Note: This Guidemaster can be used with reels up to a maximum drum width (or B dimension)
of 22". Operates with up to a 2.16" O.D. hose.
E
Top-wind (GMT)
Bottom-wind (GMB)
High-mount,
top-wind position
FH-3 Roller and Spool Assembly
Not recommended for hoses larger than 1-1/2" I.D.
Low-mount,
Speeds handling and reduces hose wear. Buffed stainless
bottom-wind
steel rollers resist corrosion, pitting, and abrasion. Polished, position
chrome-plated spools and blocks add lasting beauty to your
equipment. Delrin bearing surfaces assure quiet operation
and minimum wear.
Assembly can be factory installed, when specified, or ordered
for field installation on reels or other equipment.
To Order: For factory installation, specify FH-3 Assembly
and indicate position on reel. As an accessory, specify FH-3
Assembly and give length of roller (Dimension Z), and distance
between mounting holes (Dimension X). Mounting brackets
are available.
Z
X
2"
1-1 ⁄2"
FH-3 top-wind mounting brackets
FH-3 bottom-wind
mounting brackets
10
Hannay Reels, Inc.
Phone: 518-797-3791
Toll Free: 1-877-467-3357
Domestic FAX: 1-800-733-5464
International FAX: 518-797-3259
4"
FH-3 double-captive roller
assembly
hannay.com
reels@hannay.com
Y
D
HOW DO I GET THE RIGHT HOSE REEL?
Hose Reel Spec Worksheet
To specify Hannay reels, fill out this simple form and mail or fax it to your dealer.
Photocopy this page or download and print from hannay.com
1. Who is the reel for?
Contact
/ /
Date
Company
Division
Street Address
City
State
Telephone ( Zip
)
Country
Fax ( )
2. What is the reel for?
HOSE (check one):
Indicate your custom specifications
Storage only
Live Single hose
Live Dual hose
Inside diameter:
Hose length:
Bend radius:
Flat hose dimensions:
Outside diameter:
Hose weight:
Coupling spacing:
Type of product handled live application: (check one):
Liquid (specify):
Temperature:
Oxygen/Acetylene:
Gases (specify):
Pressure:
Hydraulic fluid (specify):
Fluid path type: (check one):
Steel (standard)
Reel inlet type: (check one):
Swivel joint 90° (standard)
Reel outlet type (riser):
Aluminum
Other (specify):
Stainless Steel
4. Specifying Location
of Components
Other
Straight
Optional Location of Components:
Location of the inlet, outlet riser, and rewind
mechanism can be varied to meet your
requirements and must be specified on
your order. Unless otherwise specified,
most reels will be shipped as Right Top
Rewind with the inlet, outlet riser, and
rewind mechanism on the operator’s right.
Size:
Thread (check one):
National Pipe Thread (NPT)
Joint Industry Committee (JIC)
National Standard Thread (NST) British Standard Pipe (BSP)
3. What features does the reel need?
Other
RT – Right Top Rewind
Standard – Always look at
your reel from this position
to determine right hand or
left hand.
Check type of rewind:
MANUAL REWIND
Disc rewind (hand over hand)
Gear-driven crank
Direct crank (permanent or removable)
Chain-driven crank
Air
Electric (voltage):
Hydraulic
RB – Right Bottom Rewind
POWER REWIND
Spring
Type of installation (check one):
Floor
Wall
Overhead
Temperature Range:
Environment:
Accessories (if any):
Hose Stop:
LT – Left Top Rewind
Standard for 1500, 1800,
2000 & 4000 Series reels.
Vehicle
LB – Left Bottom Rewind
Yes
No
Roller Assemblies:
Finish:
Painted steel (standard)
Aluminum
Polished
Unpolished
Stainless steel
Polished
Unpolished
Check type of installation and roller position for spring reels:
rag
D
Position SR
L ift
Position VR
tretch (no roller)
S
Position TR
all Mount
W
Position TR
ecovery (pick-up)
R
(no roller)
Note: Use component location initials as suffix
after model number (ie: EPB24-25-26 RT)
5. Please note size and/
or weight limitations
for your installation
SPECIFICATIONS
Length:
Height:
or
Width:
Constant tension available on all roller positions
Weight:
For custom applications not found in our catalogs,
call the Inside Sales Group at 518-797-3791.
hannay.com
reels@hannay.com
Phone: 518-797-3791
Toll Free: 1-877-467-3357
Domestic FAX: 1-800-733-5464
International FAX: 518-797-3259
Hannay Reels, Inc.
11
You Can’t Buy A Better Reel.
Find reels for every need.
Learn more about all of our reels, including specs, drawings, and even
how to select the right reels and accessories for your industry.
Better Reel.
You Can’t Buy A Better Reel.
Ordering &
Accessory Guide
You Can’t Buy A Better Reel.
Petroleum Hose Reels
Stainless Steel Reels
| Washdown | Chemical Transfer | Potable Water | Food Processing | Bottling Plants |
| Home Fuel Delivery | In-plant Refueling | Marine Refueling |
| Washdown | Chemical Transfer | Potable Water | Pharmaceuticals & Cosmetics | Fiber Optics |
| Pharmaceuticals & Cosmetics | Fueling | Fire Protection | Dairy Operations |
| Off-road Vehicle/Equipment Refueling |
| Food Processing | Fueling | Fire Protection | Dairy Operations | Bottling Plants |
This catalog is a guide for ordering reels and spec’ing
accessories for reels. Look inside for information on:
• Selecting the right reel
• Reel components
• Available accessories
You Can’t Buy
A Better Reel.
• How to spec and order
reels and accessories
• Ordering options
• Hannay Reels policies
Family owned and operated since 1933
Family owned and operated since 1933
Ordering & Accessory
Guide
Learn more about:
• Selecting the right reel
• Reel components
• Available accessories
• How to spec and order reels
and accessories
• Ordering options
• Hannay Reels policies
You Can’t Buy A Better Reel.
Industrial Hose Reels
You Can’t Buy
A Better Reel.
Family owned and operated since 1933
You Can’t Buy
A Better Reel.
Family owned and operated since 1933
Industrial Hose Reels
Petroleum Hose Reels
Stainless Steel Reels
Includes specs and
information on:
•H
igh pressure spring
rewind reels
•C
ompact manual
rewind reels
• Power rewind reels
• Portable storage reels
• Hose assemblies
Comprehensive
information on:
• Manual or power
rewind reels
• Power rewind reels for
inverted installation
• Single wrap power
rewind reels
• Guide for inverted
installation
Details and specs for:
• Spring rewind reels
• Manual rewind reels
• Compact manual
rewind reels
• Fuel reels
View all our reel catalogs online at hannay.com
Family owned and operated
since 1933, Hannay Reels is the
world leader in both OEM and
aftermarket applications. Hannay
offers thousands of standard hose
reel and cable reel models, as well
as unmatched custom capabilities.
We can easily and affordably
customize a reel to meet your
exact specifications – built to
last, delivered fast. Additional
catalogs are available through
your local Hannay Reels dealer
or online at hannay.com.
553 State Route 143 | Westerlo, New York 12193
Email: reels@hannay.com |
Phone: 518-797-3791
Toll Free: 1-877-467-3357
hannay.com
Domestic FAX: 1-800-733-5464
International FAX: 518-797-3259
All Hannay reels are constructed of
quality heavy gauge steel (optional
aluminum or stainless steel also
available on most models).
Form H-0506-LP Rev2 WSP 1.5M 11-14
MADE IN U.S.A.