i. Phenol formaldehyde (PF) ii. Urea melamine formaldehyde (UMF

Transcription

M/S CENTURY PLYBOARDS (I) LTD.
FORM 1
I.
Basic Information
S. No
Item
1
Name of the project/s
2
3
Details
Proposed capacity enhancement of
resin
manufacturing from 100 TPM to 1700 TPM by
M/s Century Plyboards (I) Ltd Chennai
S.No. in the schedule
Schedule
5(f)
“Synthetic
organic
Chemicals industry”
Proposed capacity / area / length / tonnage Resins manufactured – Existing
to be handled / command area / lease i. Phenol formaldehyde (PF)
area/number of wells to be drilled
ii. Urea melamine formaldehyde (UMF)
iii. Melamine urea formaldehyde (MUF)
Combined existing
capacity – 100TPM
resin
production
Proposed additional resins
i. Urea formaldehyde (UF)
ii. Melamine formaldehyde (MF)
Total number of resins (after expansion)
i.
ii.
iii.
iv.
v.
Phenol formaldehyde (PF)
Urea melamine formaldehyde (UMF)
Melamine urea formaldehyde (MUF)
Urea formaldehyde (UF)
Melamine formaldehyde (MF)
Combined final resin production capacity
- 1700TPM
4
5
6
7
New/Expansion/Modernization
Existing Capacity/ Area etc.
Category of Project i.e. ‘A’ or ‘B’
Does it attract the general condition?
If yes, please specify.
8
Does it attract the specific condition?
If yes, please specify.
9
Location
Plot/survey/ Khasra. No
10
The copy of Consent Order by TNPCB for the
existing unit is attached in Prefeasibility report.
Expansion/Modernization
100 TPM of PF, UMF, MUF resins
A
Yes
The unit is located within 5km of Tamil Nadu –
Andhra Pradesh state border
No
176B/4, 181, 182/1, 182/2, 182/3, 186/1B,
186/2, 187/1A, 187/2A, 187/1B, 187/2B,
187/3B, 187/1C, 187/3A1, 187/10, 188, 188/1B,
188/2, 188/3, 189/1, 190/1, 190/2, 190/3,
190/4, 190/5, 191A & 193A.
Village
Chinna Obulapuram
Tehsil
Gummidipoondi
District
Thiruvallur
State
Tamil Nadu
Nearest railway station/airport along with Elavur railway station (ELR) – 973m (N)
distance in Km.
Chennai International Airport – 49km (S)
i
11
12
13
14
15
16
17
18
19
20
21
22
23
24
FORM 1
Nearest town, city, district headquarters Gummidipoondi (Town) – 4.4km (S)
along with distance in Km.
Chennai (City) – 46km (SSE)
Thiruvallur (District H.Q) – 24.2km (SSW)
Village panchayats, Zilla parishad, municipal Periyaobulapuram Panchayat
corporation, local body (complete postal Gummidipoondi, Tamil Nadu –601 201
address with telephone nos. to be given)
Name of the applicant
M/s Century Plyboards (I) Limited
Registered address
60 /12, Sriman Srinivasan road,
Alwarpet, Chennai - 600018
Address for correspondence
Name
Mr. Ramjilal Sharma
Designation (Owner/Partner/CEO)
Vice President
Address
48th K.M. Stone, GNT Road, Chinna Obulapuram,
Gummidipoondi
Pin Code
601 201
E-Mail
ramji@sharonply.com/rath@sharonply.com
Telephone No
044-30895601 / 09444084801 / 9444409356
Fax No
044-24346216
Details of Alternative Sites Examined, if any, Nil. The proposed project is expansion of
location of these sites should be shown on a existing unit. The Topo map showing 10 km
radius in enclosed in Pre-feasibility report
topo sheet.
Interlinked Projects
Nil
Whether separate application of interlinked Not Applicable
project has been submitted?
If yes, date of submission
Not Applicable
If no, reason
Not Applicable
Whether the proposal involves approval / No
Clearance under the following acts: if yes,
details of the same and their status to be
given.
(a)The Forest (Conservation) Act, 1980?
(b)The Wildlife (Protection) Act, 1972?
(c)The C.R.Z Notification, 1991?
Whether there is any government order/ Nil
Police relevant/ relating to the site?
Forest land involved (hectares)
Nil
Whether there is any litigation pending
There is no litigation pending against the land.
against the land/ or land in which the
Project is proposed to be set up?
(a) Name of the Court
(b) Case No.
(c) Order/ directions of the Court, if any
and its relevance with the proposed
project
ii
FORM 1
(II) Activity
1. Construction, operation or decommissioning of the Project involving actions,
which will cause physical changes in the locality (topography, land use, changes
in water bodies, etc.)
Details thereof with approximate
Information/Checklist
Yes/
S.No.
quantities / rates, wherever possible)
confirmation
No
with source of information data
1.1
Permanent or temporary change in
No
The project is expansion of existing unit with
land use, land cover or topography
minimal construction activity without altering
the topography of the area. Hence no major
including increase intensity of land
change in Land use, land cover of the project
use (with respect to local land use
site
plan)
1.2
Clearance
of
existing
land,
No
Not required
vegetation and buildings?
1.3
Creation of new land uses?
No
Not applicable
1.4
1.5
1.6
1.7
1.8
1.9
1.10
1.11
1.12
1.13
1.14
Pre-construction investigations e.g.
Bore holes, Soil testing?
Construction works?
Demolition works?
Temporary
sites
used
for
construction works or housing of
construction workers?
Above ground buildings, structures
or earthworks including linear
structures, cut and fill or excavations
Underground works mining or
tunneling?
Reclamation works?
Dredging?
Off shore structures?
Production
and
manufacturing
processes?
Facilities for storage of goods or
materials?
No
Not applicable
Yes
Construction of process for plywood
manufacturing
Not applicable
Construction workers will be hired from
nearby villages.
No
No
Yes
No
No
No
No
Yes
Yes
iii
Excavation works will be carried out for
foundation of the structures followed by site
leveling. The cut and fill process will be
required to the minimum extent.
Not required
Not required
Not required
Not required
There will be an increase in the quantity of
resins produced for captive usage.
The existing production capacity of plywood
&
veneer
production
will
increase.
Manufacturing of pre-laminated boards &
raw particle board will be started.
The production process and flow sheet are
furnished in Pre-feasibility report.
Existing facilities for storage of raw materials
are sufficient.
1.15
Facilities for treatment or disposal of
solid waste or liquid effluents?
FORM 1
Yes
Sewage generated from the project site is
treated in STP of capacity 50 KLD & treated
water is used for green belt.
MSW generated is handed over to village
Panchayat for disposal.
Hazardous waste (residue from reactors)
generated onsite is handed over to M/s Tamil
Nadu Waste Management Ltd. A copy of the
agreement is enclosed in the Prefeasibility
Report.
1.16
Facilities for long term housing of
operational workers?
New road, rail or sea traffic during
Construction or operation?
New road, rail, air, waterborne or
other
transport
infrastructure
including new or altered routes and
stations, ports, airports etc?
Closure or diversion of existing
transport routes or infrastructure
leading to changes in Traffic
movements?
New or diverted transmission lines or
pipelines?
Impoundment, damming, culverting,
realignment or other changes to the
hydrology
of
watercourses
or
aquifers?
Stream crossings?
No
Existing facilities are sufficient.
No
Existing roads to the site will be adequate for
transportation
The existing roads and rail transport
infrastructure will be adequate.
1.23
1.24
1.17
1.18
1.19
No
No
As the construction works will be carried out
within the existing premises, there will be no
need for closure or diversion of existing
transport routes.
There will be no diversion of transmission
lines and pipelines.
Not applicable
No
Nil
Abstraction or transfers of water
from ground or surface waters?
Yes
Changes in water bodies or land
surface affecting drainage or runoff?
No
Yes
1.25
Transport of personnel or materials
for
construction,
operation
or
decommissioning?
No
1.26
Long-term
dismantling
or
decommissioning
or
restoration
works?
Water for process & domestic usage is
currently drawn from existing borewells. For
the proposed expansion additional water will
be met through existing borewells with
approval from competent authority
There shall be no changes in water bodies or
the land surface that would affect drainage
and runoff.
During the construction phase personnel and
construction materials will be transported
only through the existing roads.
During the operation phase, internal roads
will be developed for smooth traffic flow.
Not applicable.
1.20
1.21
1.22
No
No
iv
1.27
1.28
1.29
1.30
1.31
FORM 1
Ongoing
activity
during
decommissioning which could have
an impact on the environment?
No
Not applicable.
Influx of people to an area either
temporarily or permanently?
Introduction of alien species?
Loss of native species or genetic
diversity?
Any other actions?
No
There will be no change in manpower
requirement for the expansion.
Not applicable.
Not applicable.
No
No
No
Greenbelt development will be increased
within the site.
2. Use of Natural resources for construction or operation of the Project (such as
land, water, materials or energy, especially any resources which are nonrenewable or in short supply)
Information/checklist
S. No.
confirmation
2.1
2.2
Land especially undeveloped or
agricultural land (ha)
Water (expected source & competing
users) Unit: KLD
Yes/
No
No
Yes
2.3
Minerals (MT)
No
2.4
Construction
material
stone,
aggregates, and / soil (expected
source - MT)
Forests and timber (Source - MT)
Yes
2.6
Energy including electricity and fuels
(source, competing users) Unit: fuel
(MT), energy (MW)
Yes
2.7
Any
other
natural
resources
(use appropriate standard units)
No
2.5
Details there of (with
approximate
quantities/rates, wherever possible)
The proposed expansion will be carried in the
existing manufacturing unit
During construction phase, water requirement
shall be met through tankers.
During operation phase water will be sourced
from borewells. The total requirement will be
80 KLD (including domestic & industrial
usage)
Not applicable.
Construction material like cement, steel,
bricks, sand etc will be procured from local
dealers/suppliers from the nearby villages.
Yes
v
The power for expansion project will be met
through TANGEDCO. As a backup power
supply additional DG sets (600 KVA (2 Nos),
365 KVA, 250 KVA & 180 KVA (2 Nos.) will be
installed
FORM 1
3. Use, storage, transport, handling or production of substances or materials,
which could be harmful to human health or the environment or raise concerns
about actual or perceived risks to human health.
Details there of (with approximate
Yes/
S. No.
confirmation
No
3.1
Use of substances or materials,
Yes
Formaldehyde will be the main raw material
which are hazardous (as per MSIHC
for the manufacturing of resin and will be
rules) to human health or the
stored as per MSIHC Rules. The MSDS for all
environment (flora, fauna, and water
chemicals involved in process are enclosed
supplies)
with Prefeasibility Report.
No
Not applicable.
3.2
Changes in occurrence of disease or
affect disease vectors (e.g. insect or
water borne diseases)
3.3
Affect the welfare of people e.g. by
No
Not applicable.
changing living conditions?
3.4
Vulnerable groups of people who
No
Not applicable.
could be affected by the project e.g.
hospital patients, children, the
elderly etc.
3.5
Any other causes
No
Nil
4. Production of solid wastes during construction or operation or
decommissioning(MT/month)
S.No.
confirmation
Yes/
No
4.1
Spoil, overburden or mine wastes
No
4.2
Municipal waste (domestic and or
commercial wastes)
Yes
4.3
Hazardous
(as
per
Hazardous
Management Rules)
wastes
Waste
Yes
4.4
4.5
4.6
No
No
Yes
4.7
Other industrial process wastes
Surplus product
Sewage sludge or other sludge from
effluent treatment
Construction or demolition wastes
Yes
4.8
Redundant machinery or equipment
No
vi
quantities/rates, wherever possible) with
source of information data
No spoil, overburden or mine wastes are
envisaged due to the proposed project.
MSW generated is currently handed over to
the local Panchayat for disposal. It will be
continued after expansion of the unit.
Hazardous wastes generated onsite is
currently handed over to M/s Tamil Nadu
Waste Management Ltd. It will be continued
after expansion.
Not applicable
Not applicable
Sludge from STP will be used as manure for
green belt development.
Construction waste generated shall be reused
for laying roads.
Only well maintained vehicles & equipments
will be hired.
4.9
FORM 1
No
There is no source for contamination of soils.
4.10
Contaminated soils or other
materials
Agricultural wastes
No
Not applicable
4.11
Other solid wastes
Yes
Generated Additional wood waste will be
used as a fuel for Thermic Fluid Heater (TFH)
as per present practice.
5. Release of pollutants or any hazardous, toxic or noxious substances to air
(Kg/hr)
Yes/
S. No.
confirmation
No
5.1 Emissions from combustion of fossil
Yes
Fugitive emissions from vehicles will be
minimized by adopting regular maintenance of
fuels from stationary or mobile
the vehicles.
sources
Emissions will be mitigated by providing Pulse
Jet bag filters / multi cyclone / scrubber &
stacks of adequate height.
5.2 Emissions from production processes
No
There will be no emission from the production
processes. Vapours generated from the
reactors will be condensed & recycled
completely for resin manufacturing.
5.3 Emissions from materials handling
No
Emissions from material handling, storage &
transport will be negligible since dedicated
storage or transport
storage facilities are already present within
the site. Additional storage for the new unit
facilities will be set up.
5.4 Emissions from construction activities
Yes
Construction works will be carried out using
including plant and equipment
well maintained equipments and by periodical
water spraying.
5.5 Dust or odours from handling of
No
Construction materials will be transported in
materials
including
construction
tarpaulin covered trucks.
materials, sewage and waste
Sewage will be treated through STP and used
for gardening.
Solid waste will be disposed through local
Panchayat.
5.6 Emissions from incineration of waste
No
There will be no incineration activities.
5.7 Emissions from burning of waste in
No
No such activities will be permitted.
open air e.g. slash materials,
construction debris)
5.8 Emissions from any other sources
No
There will be no emissions from any other
sources
vii
FORM 1
6. Generation of Noise, Vibration and Emissions of Light & Heat
S. Information/Checklist
Yes/No
No. confirmation
with source of information data with
source of information data
6.1 From operation of equipment e.g.,
Yes
The noise generating sources are kept
inside acoustic enclosure to control the
engines, ventilation plant, crushers
propagation of Noise. Hence the noise are
maintained within the stipulated norms for
Industrial area
6.2 From industrial or similar processes
No
Generation of noise, vibration & emission
of heat are controlled for good working
environment.
6.3 From construction or demolition
Yes
Excavation, drilling and welding works at
the site will generate noise, vibration and
dust emissions which will be mitigated by
water spraying and deploying well
maintained vehicles.
6.4 From blasting or piling
No
Not applicable.
6.5
From construction or operational
traffic
Yes
6.6 From lighting or cooling systems
No
6.7 From any other sources
Yes
Noise generated due to traffic movement
will be minimized by plantation on the
sides of internal roads, on the open spaces
inside and around the periphery of whole
complex.
Adequate enclosures will be provided.
Noise & vibrations from D.G sets will be
mitigated by acoustic enclosures.
7. Risks of contamination of land or water from releases of pollutants into the
ground or into sewers, surface waters, groundwater, coastal waters or the sea
S.
Yes/
No.
confirmation
No
7.1 From handling, storage, use or
No
Spillage of hazardous materials will be
spillage of hazardous materials
negligible since dedicated storage facilities
are already in place within the site.
7.2 From discharge of sewage or other
No
The wastewater generated from the unit
effluents to water or the land
will be treated in STP. Treated wastewater
(expected mode and place of
is used for greenbelt development.
discharge)
7.3 By deposition of pollutants emitted
No
There will be minimal emission of
to air into the land and into water
pollutants from the project site since the
vapours from the process will be
condensed & reused.
viii
FORM 1
7.4 From any other sources
No
No other polluting sources exist.
7.5 Is there a risk of long term build
up of pollutants in the environment
from these sources?
No
There will not be any long term build up of
pollutants in the environment.
8. Risk of accidents during construction or operation of the Project, which could
affect human health or the environment
Yes/
S.No.
confirmation
No
8.1 From explosions, spillages, fires
No
Spillage of hazardous materials will be
etc from storage, handling, use or
negligible since dedicated storage facilities
are already in place within the site. Handling
production
of
hazardous
of Hazardous substances will be by
substances
authorized persons.
8.2
From any other causes
No
There exist no risks from any other sources
8.3
Could the project be affected by
natural
disasters
causing
environmental
damage
(e.g.
floods, earthquakes, landslides,
cloudburst etc)?
No
The area under study falls in Zone III
according to the Indian Standard Seismic
Zoning Map.
9. Factors which should be considered (such as consequential development)
which could lead to environmental effects or the potential for cumulative impacts
with other existing or planned activities in the locality
S.
No.
confirmation
9.1
Lead to development of supporting
utilities, ancillary development or
development stimulated by the
project which could have impact
on the environment e.g.
• Supporting
infrastructure
(roads, power supply, waste or
waste water treatment, etc.)
• Housing development
• Extractive industry.
• Supply industry
Yes/
No
No
No
No
No
ix
9.2
9.3
9.4
Lead to after-use of the site,
which could have an impact on
the environment
Set a precedent for later
developments
Have cumulative effects due to
proximity to other existing or
planned projects with similar
effects
FORM 1
No
No impact will be seen due to the
proposed activity
No
No
Not applicable
(III) Environmental Sensitivity
S. No.
Areas
Name/ Identity
1
Areas protected under international
conventions, national or local
legislation for their ecological,
landscape, cultural or other related
value
Areas which important for are or
sensitive Ecological reasons Wetlands, watercourses or other
water
bodies,
coastal
zone,
biospheres, mountains, forests
Area used by protected, important
or sensitive species of flora or fauna
for breeding, nesting, foraging,
resting, over wintering, migration
Inland,
coastal,
marine
or
underground waters
Amirthamangalam
2
3
4
5
State, National boundaries
6
7
Routes or facilities used by the
public for access to recreation or
other tourist, pilgrim areas
Defense installations
8
Densely populated or built-up area
Aerial distance (within
15km.) Proposed project
location boundary
8.98km (SW)
Pulicat Lake
6.4km (NE)
Pulicat Lake
6.4km (NE)
Thamarai Eri
3.4km (S)
Tamil Nadu – Andhra
Pradesh
State
Border
2.44 km (N)
Nil
Nil in 15 km radius
Nil
Nil in 15 km radius
Gummidipoondi town
4.4 km (S)
x
FORM 1
9
Area occupied by sensitive manmade land uses hospitals, schools,
places of worship, community
facilities)
Yes
Panchayat Union Middle
School
10
Areas containing important, high
quality or scarce resources (ground
water resources, surface resources,
forestry,
agriculture,
fisheries,
tourism, minerals)
Nil
Nil in 15 km radius
11
Areas already subjected to pollution
environmental
damage.
(those
where existing legal environmental
standards are exceeded)
Nil
Nil in 15 km radius
12
Areas susceptible to natural hazard
which could cause the project to
present environmental problems
(earthquakes,
subsidence,
landslides, flooding erosion, or
extreme
or
adverse
climatic
conditions)
Nil
The area under study falls
in Zone III according to
the
Indian
Standard
Seismic Zoning Map. The
area is not prone to
subsidence,
landslides,
erosion and flooding or
adverse climatic conditions.
V) PROPOSED TERMS OF REFERENCE
ToR for EIA studies in respect of the synthetic organic chemicals industry may include,but
not limited to the following:
1. Executive summary of the project – giving a prima facie idea of the objectives of
theproposal, use of resources, justification, etc. In addition, it should provide acompilation of
EIA report, including EMP and the post-project monitoring plan inbrief.
Project description
2. Justification for selecting the proposed product and unit size.
3. Land requirement for the project including its break up for various purposes, its
availability and optimization.
4. Details of proposed layout clearly demarcating various units within the plant.
5. Product spectrum (Proposed products along with production Capacity) and processes
6. Complete process flow diagram describing each unit, its processes and operations,along
with material (material balance).
xi
FORM 1
7. Details on raw materials, source and storage with in the premises.
8. Details on solvent balance, measures for solvent recovery
9. Details on requirement of energy and water along with its source and authorizationfrom
the concerned department.
10. Details on water balance including quantity of effluent generated, recycled &
reused.Efforts to minimise effluent discharge and to maintain quality of receiving waterbody.
11. Segregation of waste stream, characterization and quality with specific treatment
12. Details of end of the pipe effluent treatment plant, inlet and treated water quality
withspecific
efficiency
of
each
treatment
unit
in
reduction
in
respect
of
allconcerned/regulated environmental parameters.
13. Management plan for solid/hazardous waste including storage, utilization and
safedisposal.
CPCB
guidelines
in
respect
of
specific
treatment,
such
as
solar
evaporation,incineration, etc., need to be followed.
14. Details regarding infrastructure facilities such as sanitation, fuel storage, restroom,etc.,
to the workers during construction and operation phase.
15. In case of expansion of existing industries, remediation measures adopted to restorethe
environmental quality if the groundwater, soil, crop, air, etc., are affected and adetailed
compliance to the prior environmental clearance/consent conditions.
Description of the environment
16. The study area shall be up to a distance of 10 km from the boundary of the
proposedproject site.
17. Location of the project site and nearest habitats with distances from the project site tobe
demarcated on a toposheet (1: 50000 scale).
18. Landuse based on satellite imagery including location specific sensitivities such
asnational parks / wildlife sanctuary, villages, industries, etc., for the study area.
19. Demography details of all the villages falling within the study area.
20. Topography details of the project area.
21. The baseline data to be collected from the study area w.r.t. different components
ofenvironment viz. air, noise, water, land, and biology and socio-economic. Actual
monitoring of baseline environmental componentsshall be strictly according to the
parameters prescribed in the ToR after consideringthe proposed coverage of parameters by
the proponent in draft ToR and shallcommence after finalization of ToR by the competent
Authority.
xii
FORM 1
22. Geological features and geo-hydrological status of the study area.
23. Details on existing ambient air quality and expected, stack and fugitive emissions
forPM10*, PM2.5*, SO2*, NOx*, VOC*, mercaptans*, solvents*, NH3*, chlorine*,HCl*,
HBr*, H2S*, HF*, other process-specific pollutants*, etc., and evaluation ofthe adequacy of
the proposed pollution control devices to meet standards for pointsources and to meet AAQ
standards. (* - as applicable)
24. The air quality contours may be plotted on a location map showing the location ofproject
site, habitation nearby, sensitive receptors, if any and wind roses.
25. Details on noise levels at sensitive/commercial receptors.
26. Site-specific micro-meteorological data including mixing height.
27. One season site-specific data excluding monsoon season.
28. Ecological status (terrestrial and aquatic) of the study area such as habitat type
andquality, species, diversity, rarity, fragmentation, ecological linkage, age, abundance, etc.
Anticipated environmental impacts and mitigation measures
30. Anticipated generic environmental impacts due to this project which may be evaluated
for significance and based on corresponding likely impacts VECs may be identified. Baseline
studies may be conducted for all the concerned VECs and likely impacts will have to be
assessed for their magnitude in order to identify mitigation measures
31. While identifying the likely impacts, also include the following for analysis of significance
and required mitigation measures:
− impacts due to transportation of raw materials and end products on the
surrounding environment
− impacts on surface water, soil and groundwater
− impacts due to air pollution
− impacts due to odour pollution
− impacts due to noise
− impacts due to fugitive emissions including VOCs / HAPs
− impact on health of workers due to proposed project activities
32. Action plan for the greenbelt development – species, width of plantations,
planningschedule, etc., in accordance to CPCB published guidelines.
xiii
FORM 1
Analysis of alternative resources and technologies
33. Comparison of alternate sites considered and the reasons for selecting the proposed
site. Conformity of the site with prescribed guidelines in terms of CRZ, river, highways,
railways, etc.
34. Details on improved technologies.
35. Details on proposed recovery options.
Environmental monitoring program
36. Monitoring programme for pollution control at source.
37. Monitoring pollutants at receiving environment for the appropriate notified parameters –
air quality, groundwater, surface water, gas quality, etc. during operational phase of the
project.
38. Specific programme to monitor safety and health protection of workers.
39. Proposed plan to estimate and monitor fugitive emissions including VOCs from all the
sources and appropriated control measures.
40. Stack and fugitive emissions may be monitored for SPM, PM10, PM2.5, SO2, NOx,HC,
CO, VOC and evaluation of the adequacy of the proposed pollution control devices to meet
gaseous emissions.
41. Appropriate monitoring network has to be designed and proposed, to assess the possible
residual impacts on VECs.
42. Details of in-house monitoring capabilities and the recognized agencies if proposed for
conducting monitoring.
Additional studies
43. Details on risk assessment and damage control during different phases of the project
and proposed safeguard measures.
44. Details on socio-economic development activities such as commercial property
values, generation of jobs, education, social conflicts, cultural status, accidents, etc.
45. Proposed plan to handle the socio-economic influence on the local community. The plan
should include quantitative dimension as far as possible.
46. Points identified in the public hearing and commitment of the project proponent to the
same. Detailed action plan addressing the issues raised, and the details of necessary
allocation of funds.
xiv

i. Phenol formaldehyde (PF) ii. Urea melamine formaldehyde (UMF

Transcription

Similar documents

2011 - The Couchiching Conservancy

AVS24 2.4 GHZ Wireless Audio/Video Sender

(eoo) o+s-rzzo (rre) eoe-ozzr

HEMINEVRIN - Alcohol and Alcoholism

Copyright page - Katherine Don

(aoo) ear-rzzo (nre) soa-ozzr

No trophy could ever fully express our

Chaise Lounge

CySec Exam Preparation Course Basic and Advanced Level Exams

Sports Science Summit Sports Science Summit

Page 1 of 12 FORM 1 (I) Basic Information Sr. No. Item Details 1