Data sheet

LUGA C 2015 HiCRI – COB modules for lumen packages up to 800 lm
LED BUILT-IN
MODULES
LUGA C 2015 HiCRI
500 lm TO 800 LM
LUGA C 2015 HiCRI
COB MODULES FOR LUMEN
PACKAGES UP TO 800 LM
DMC112S**E
Typical Applications
• Integration in reflector luminaires
• Flat surface-mounting luminaires
• Downlights
• Residential lighting
• Furniture lighting
• Stairway and corridor illumination
LUGA C 2015 HiCRI
¢ LONG SERVICE LIFETIME: 50,000 HOURS (L90; B10)
¢ HIGHLY EFFICIENT: UP TO 117 LM/W AT tp = 65 °C
¢ NARROW COLOUR TOLERANCES:
3 STEP MACADAM (INITIAL)
4 STEP MACADAM SHIFT (AFTER 50,000 HRS)
¢ HIGH ELECTRICAL ISOLATION DUE TO
CERAMIC COB TECHNOLOGY
¢ SMALL SHAPE
A Member of the Panasonic Group
Vossloh-Schwabe Deutschland GmbH · Hohe Steinert 8 · 58509 Lüdenscheid · Germany · Phone +49 23 51/10 10 · Fax +49 23 51/10 12 17 · www.vossloh-schwabe.com
LUGA C 2015 HiCRI – COB modules for lumen packages up to 800 lm
LUGA C 2015 HiCRI – 500 lm to 800 lm
Technical Notes
• Dimensions: 13.5x13.5x1.7 mm
• Light emitting surface (LES): Ø 8 mm
• Use of external LED constant current driver
Electrical Characteristics
at tp = 65 °C
Ref. No.
Type
DMC112S**E
Typ. voltage DC
All Types
Temperature
Typ. power consumption
150 mA
200 mA
250 mA
coefficient
150 mA
200 mA
250 mA
V
V
V
mV/K
W
W
W
31.6
32.6
33,5
–22
4.7
6.5
8.4
Voltage and power tolerance: ±10 %
Maximum Ratings
Exceeding the maximum ratings can lead to reduction of service life or destruction of the modules.
Type
DMC112S**E
Operation temperature range Ambient temperature
Storage temperature
Max. allowed
Max. permitted output voltage
range at tc point
range
repetitive
of operating device
range
°C min.
°C max.
°C min.
°C max.
°C min.
°C max.
peak current (mA) V
–40
+85
–40
+40
–40
+100
360
60
Optical Characteristics
at tp = 65 °C
Ref. No.
Type
Colour
Correlated colour
Typ. luminous flux** and efficiency at
temperature*
150 mA
K
lm
200 mA
lm/W
lm
Typ. beam
250 mA
lm/W
Typ. CRI
angle
Photometric
code
lm
lm/W
°
Ra
DMC112S27E
557803
warm white
2700
465
99
580
89
685
82
120
95
927/349
DMC112S30E
557804
warm white
3000
505
107
630
97
740
88
120
95
930/349
DMC112S40E
557805
neutral white
4000
550
117
690
106
810
96
120
95
940/349
* Colour tolerance: 3 MacAdam | ** Production tolerance of luminous flux and efficiency: ± 15 % | Min. CRI Ra: > 90 | Colour temperature 3500 K available on request
Minimum order quantity: 225 pcs.
Operating Life
at tp = 65 °C
LUGA C 2015_HiCRI_GB 2/5 December, 2014
Lumen
DMC112S**E
maintenance IF 150 mA
IF 200 mA
IF 250 mA
L90/B10
53,000 hrs.
47,000 hrs.
42,000 hrs.
L80/B10
67,000 hrs.
61,000 hrs.
57,000 hrs.
L70/B10
75,000 hrs.
70,000 hrs.
65,000 hrs.
The values contained in this data sheet can change due to technical innovations. Any such changes will be made without separate notification.
Please find further detailed information at www.vossloh-schwabe.com.
A Member of the Panasonic Group
Vossloh-Schwabe Deutschland GmbH · Hohe Steinert 8 · 58509 Lüdenscheid · Germany · Phone +49 23 51/10 10 · Fax +49 23 51/10 12 17 · www.vossloh-schwabe.com
2
LUGA C 2015 HiCRI – COB modules for lumen packages up to 800 lm
LUGA C 2015 HiCRI – 500 lm to 800 lm
Typical Light Distribution Curve
I (cd/klm)
90°
85
170
60°
255
340
30°
Mechanical Dimensions
Product Code
DMC112S**E
13.5±0.3
Ø10
13.5±0.3
LES (Ø8)
1±0.1
1.7
TS
(Ø1)
Date Code
CCT
2700K
3000K
3100K
4000K
DMC112S
CRI No.
95 NRA1S
95 NRK1S
95 PRK1S
95 NRJ1S
Bins
0.43
0.42
0.41
0.40
0.39
2700K
0.38
3000K
0.37
0.36
4000K
0.35
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
LUGA C 2015_HiCRI_GB 3/5 December, 2014
Measurement tolerance x/y: ± 0.005
The values contained in this data sheet can change due to technical innovations. Any such changes will be made without separate notification.
Please find further detailed information at www.vossloh-schwabe.com.
A Member of the Panasonic Group
Vossloh-Schwabe Deutschland GmbH · Hohe Steinert 8 · 58509 Lüdenscheid · Germany · Phone +49 23 51/10 10 · Fax +49 23 51/10 12 17 · www.vossloh-schwabe.com
3
LUGA C 2015 HiCRI – COB modules for lumen packages up to 800 lm
LUGA C 2015 HiCRI – 500 lm to 800 lm
Assembly and Safety Information
LUGA C 2015_HiCRI_GB 4/5 December, 2014
Installation must be carried out under observation of the relevant regulations and standards. The LED modules are designed for operation within
a casing or luminaire. Installation must be carried out in a voltage-free
state (i.e. disconnection from the mains). The following advice must be
observed; non-observance can result in the destruction of the LED
assembly modules, fire and/or other hazards.
• ESD (electrostatic discharge) protection measures must be observed
when handling and installing the LED modules. See VS's application
notes on ESD protection.
• LED assembly modules must not be subjected to any undue mechanical stress, e. g.:
– do not treat as bulk cargo
– avoid shear and compressive forces during handling and
installation
– do not damage circuit paths
– do not touch the yellow phosphorus layer
• The module must be fixed onto a thermally conductive surface.
• Safe operation only possible by the use of external constant current
sources (Imax. see table "Electrical Characteristics").
• Operation only with power supply units that feature the following
protection:
– Short-circuit protection
– Overload protection
– Overheating protection
– SELV (Safety Extra Low Voltage); Umax. £ 60 V
– Imax. (see table "Maximum Ratings") must not be exceeded.
• When operating devices will be selected care has been taken to ensure that the maximum values (see table "Maximum Ratings") will not be
exceeded.
• Please ensure the correct polarity of the leads prior to commissioning.
Reversed polarity can destroy the modules.
• Safety regulations acc. to EN 60598 (or further standards) has to be
observed if the maximum output voltage exceed the permitted touchable value.
• Measurement tolerances:
– luminous flux: ± 7 %
– voltage: ± 3 %
– CRI: ± 1 %
• A parallel or serial connection of the modules is not allowed.
• To ensure problem-free operation, the specified maximum temperature
at the tc point (see "Operating Life") must be observed (and measured
in accordance with EN 60598-1). To satisfy this point, it may be
necessary to put measures in place to ensure any heat is dissipated
from the PCB to the environment.
• In the event of outdoor applications or applications in damp locations,
care must be taken to protect LED assembly modules against
humidity, splashes and jets of water. Any corrosion damage resulting
from humidity or contact with condensation will not be recognised as a
defect or manufacturing fault. LED assembly modules are not
specially protected against foreign bodies or dust. Depending on the
type of application, further protection must be ensured to prevent dust
and foreign bodies from entering.
• The photobiological safety of the LED modules must be classified into
risk groups in accordance with EN 62471: 2008.
– general lighting
exempt group: DMC112S**E
– other applications
risk group 1: DMC112S**E
The values contained in this data sheet can change due to technical innovations. Any such changes will be made without separate notification.
Please find further detailed information at www.vossloh-schwabe.com.
A Member of the Panasonic Group
Vossloh-Schwabe Deutschland GmbH · Hohe Steinert 8 · 58509 Lüdenscheid · Germany · Phone +49 23 51/10 10 · Fax +49 23 51/10 12 17 · www.vossloh-schwabe.com
4
LUGA C 2015 HiCRI – COB modules for lumen packages up to 800 lm
Accessories
LUGA C Holder
For LED PCB LUGA C
Fixation: Fixing holes for screws M3
Recommended torque: 0.4 Nm
Push-in terminals for AWG18, AWG20, AWG22,
solid or tin-plated stranded leads
2x M3
Ø 39
20
LUGA C 2015_HiCRI_GB 5/5 December, 2014
4.25
26
34.9
6.5
13
LUGA C Holder
Material: plastic
Dimensions (LxWxH): 34.9 x 26 x 4.25 mm
Type: 180414-1112
Ref. No.: 555771
10
Ø12.2
The values contained in this data sheet can change due to technical innovations. Any such changes will be made without separate notification.
Please find further detailed information at www.vossloh-schwabe.com.
A Member of the Panasonic Group
Vossloh-Schwabe Deutschland GmbH · Hohe Steinert 8 · 58509 Lüdenscheid · Germany · Phone +49 23 51/10 10 · Fax +49 23 51/10 12 17 · www.vossloh-schwabe.com
5