Lutron | Drapery Track System

Lutron®
Drapery Track System
Chassis Specification
086-123 1 06.11.10
Lutron | Drapery Track System
The Lutron drapery track utilizes the ultra-quiet,
precision controlled Electronic Drive Unit. It controls
the movement of the drape, adjusting it to the user’s
desired positions.
Features
• Smooth, ultra-quiet operation
• Draperies start, move, and stop with precision
• Offers programmable presets
• Single, dual, curved, single-tandem and
dual-tandem tracks available
• Easy-to-read and easy-to-use controls
• Optional infrared system with QED, QS and
Stanza™ systems provide easy, convenient control
from anywhere in the room
• Wireless control available with QS Wireless system
• Available in right, left, and center draw
configurations
• Does not require group controllers or relay
systems to create drapery groups and sub-groups
• Can be installed in new construction or
retrofit application
• Power failure memory for the lifetime of
the product
• Operates up to 175 lb (79.4 kg) draperies
• Manual open feature option available
• Track splicing option available with up to
two splices per track
• Available in pinch pleat and ripplefold pleat styles
• 8 year limited warranty
Job Name:
Job Number:
S p e c i f i c at i o n S u b m i t ta l
Model Numbers:
Lutron Drapery Drive Unit
Lutron Drapery Track System
Page 1
Lutron®
Drapery Track System
Chassis Specification
086-123 2 06.11.10
Optional
Splicing Bar
System components
Drive Belt
Track
Idler Gear Housing
Standard
Master Carrier
Auxiliary Carriers
Cover
Optional
manual open
master carrier
available
Lutron Drapery Drive
One Way Draw
Ripplefold Components
Drive end snap bracket
Standard one way
draw master carrier
Optional manual open one way draw master carrier available
Center Draw Ripplefold Components
Standard center draw master carriers
Idler end snap bracket
Drive end snap bracket
Optional manual open center draw master carriers available
Job Name:
Job Number:
S p e c i f i c at i o n S u b m i t ta l
Model Numbers:
Page 2
Lutron®
Drapery Track System
Chassis Specification
086-123 3 06.11.10
Straight drapery track options
Left draw, left drive
Right draw, right drive
Center-draw, left or right drive
Tandem draw, left and right drives (operates as a center draw drapery)
NOTE
Valance and drapery not included
Job Name:
Job Number:
S p e c i f i c at i o n S u b m i t ta l
Model Numbers:
Page 3
Lutron®
Drapery Track System
Chassis Specification
086-123 4 06.11.10
Standard Curved Drapery track options
Min Drive Leg Length (D) – 22 7 8 in (581 mm)
Min Idler Leg Length (B) – 23 1 8 in (587mm)
One leg can be up to 72 in (1829 mm) while the other leg can be up to 144 in (3658 mm) (Drive can be
located on either leg) for a total track length of 216 in (5487 mm)
Left draw, left drive, inside curve
B
D
Left draw, left drive, outside curve
B
D
Right draw, right drive, inside curve
D
B
Right draw, right drive, outside curve
D
B
Job Name:
Job Number:
S p e c i f i c at i o n S u b m i t ta l
Model Numbers:
Page 4
Lutron®
Drapery Track System
Chassis Specification
086-123 5 06.11.10
Standard Curved Drapery track options (continued)
Center draw, left drive, inside curve
B
D
Center draw, left drive, outside curve
B
D
Center draw, right drive, inside curve
D
B
Center draw, right drive, outside curve
D
B
Job Name:
Job Number:
S p e c i f i c at i o n S u b m i t ta l
Model Numbers:
Page 5
Lutron®
Drapery Track System
Chassis Specification
086-123 6 06.11.10
Standard Curved Drapery track options (continued)
Center draw, tandem (right and left drive), inside curve
B
D
D
Center draw, tandem (right and left drive), outside curve
D
D
B
Note:
Dimension B and D do not include any wall offsets. When providing dimensions B and D, account for the
wall offset to ensure the drapery track will fit properly in the desired location. The factory DOES NOT take any
deductions from the provided dimensions. Refer to page 8 for recommended minimum offsets.
Job Name:
Job Number:
S p e c i f i c at i o n S u b m i t ta l
Model Numbers:
Page 6
Lutron®
Drapery Track System
Chassis Specification
086-123 7 06.11.10
System dimensions
Top view (single track, right draw)
1.6 in (41.3 mm)
1.3 in (31.8 mm)
2.1 in (52.1 mm)
Front view (single track, right draw)
Track width 18 ft (5.5 m) max without splice
Up to 30 ft (9.1 m) with splice (2 splice max)
10.6 in (270 mm)
3.3 in (83.82 mm)
Electronic Drive Unit
1.9 lbs (0.9 kg)
3.3 in
(83.8 mm)
2.1 in
(52.3 mm)
8.89 in
(225.6 mm)
Job Name:
Job Number:
S p e c i f i c at i o n S u b m i t ta l
Model Numbers:
Page 7
Lutron®
Drapery Track System
Chassis Specification
086-123 8 06.11.10
Single drapery track system
Maintain enough clearance between the drapery track and the inside face of the
top treatment or ceiling recess to allow the fabric to move freely.
Dimensions*
11.25 in (286 mm)
3.5 in (89 mm)
2.5 in (64 mm)
1 in (25 mm)
(wall mount shown)
Dual drapery track system
Lutron® drapery tracks can be used for a combination
sheer/blackout treatment.
Dimensions*
11.25 in (286 mm)
3.5 in (89 mm)
2.5 in (64 mm)
1 in (25 mm)
5.5 in (140 mm)
(wall mount shown)
Single, tandem drapery track system
The accuracy of movement and speed control of the Lutron
drapery track system allows two independent systems to be used
to create a center draw drape.
Corner application
Lutron drapery tracks can be used in corner applications.
Dimensions*
11.25 in (286 mm)
3.5 in (76 mm)
2.5 in (64 mm)
1 in (25 mm)
Dimensions*
11.25 in (286 mm)
3.5 in (76 mm)
2.5 in (64 mm)
(wall mount shown)
Job Name:
Job Number:
S p e c i f i c at i o n S u b m i t ta l
Model Numbers:
Page 8
Lutron®
Drapery Track System
Chassis Specification
086-123 9 06.11.10
Bracket options
Lutron drapery track is available in either wall mount or ceiling mount.
Ceiling bracket cam lock
Ceiling mount application
track
1.2 in
(31 mm)
unlocked
closing direction
Ceiling mount
bracket exploded
top view of clip
arm extended in
unlocked position
1.3 in
(31.8 mm)
Pocket mount application
1.2 in
(31 mm)
1.3 in
(31.8 mm)
Wall mount application
Wall-mount bracket
1.3 in
(33 mm)
Job Name:
Job Number:
S p e c i f i c at i o n S u b m i t ta l
Model Numbers:
Pocket mount application
Page 9
Lutron®
Drapery Track System
Chassis Specification
086-123 10 06.11.10
Wall mount bracket
Minimum extension
4.1 in (108 mm)
1.2 in
(31 mm)
2.7 in
(70 mm)
1.7 in
(43 mm)
3.5 in
(89 mm)
Maximum extension
6.6 in (170.2 mm)
1.2 in
(31 mm)
2.7 in
(70 mm)
1.7 in
(43 mm)
6 in (152.4 mm)
Job Name:
Job Number:
S p e c i f i c at i o n S u b m i t ta l
Model Numbers:
Page 10
Lutron®
Drapery Track System
Chassis Specification
086-123 11 06.11.10
Dual wall mount bracket
Minimum extension
9.6 in (248 mm)
1.7 in
(43 mm)
1.2 in
(31 mm)
4.6 in
(117.5 mm)
3.5 in (89 mm)
9 in (229 mm)
Maximum extension
12.1 in (311.2 mm)
1.2 in
(31 mm)
4.6 in
(117.5 mm)
1.7 in
(43 mm)
6 in (152.4 mm)
11.5 in (292.1 mm)
Job Name:
Job Number:
S p e c i f i c at i o n S u b m i t ta l
Model Numbers:
Page 11
Lutron®
Drapery Track System
Chassis Specification
086-123 12 06.11.10
Recessed mount bracket
Mounting with wood screw
Mounting with drywall anchor
3 inch Drywall Anchor
Screw
1½ inch Wood Screw
Structural Member
Recessed Mounting
Bracket
Drywall Anchor
Recessed Pocket
Drapery Track
½ inch (13 mm) hole
Recessed Mounting
Bracket
Drywall
Recessed Pocket
Drapery Track
* 11 16 inch (27 mm)
Pocket Depth
* 1 1 16 inch (27 mm)
Pocket Depth
1 5 16 inch (33 mm)
Minimum Pocket Width
* 11 16 inch depth provides complete concealment of the track while maintaining
proper clearance for the drapery.
1 5 16 inch (33 mm)
Minimum Pocket Width
The track is predrilled with mounting holes for use
with either mounting type. The holes are spaced as
indicated below.
Job Name:
Job Number:
S p e c i f i c at i o n S u b m i t ta l
Model Numbers:
Page 12
Lutron®
Drapery Track System
Chassis Specification
086-123 13 06.11.10
Splice (optional)
Track available with up to 2 splices
Splicing Bar
Track splicing is available as an
option with all straight Lutron
drapery track systems
Track with 1 splice
Minimum Length: 6 ft (1829 mm)
Maximum Length: 30 ft (9144 mm)
Track provided in 2 equal sections
Track with 2 splices
Minimum Length: 12 ft (3658 mm)
Maximum Length: 30 ft (9144 mm)
Track provided in 3 equal sections
Note:
To maximize durability while minimizing carrier noise: Left and Right Draw
systems with one and two splices, and Center Draw systems with two
splices, utilize carriers with plastic wheels. All other configurations utilize
carriers with rubber wheels.
Job Name:
Job Number:
S p e c i f i c at i o n S u b m i t ta l
Model Numbers:
Page 13
Lutron®
Drapery Track System
Chassis Specification
086-123 14 06.11.10
Pinch pleat | Drapery hook setting
Drapes are typically sized so the bottom of the drapery track is located 4 in (101 mm) above the window casing.
Location may need to be adjusted to accommodate the specific drapery size and application. Lutron recommends
a drapery hook setting of 1/2 in (13 mm) from the top of the drape to the top of the hook (hooks not included).
This locates the drapes just below the track and prevents it from rubbing on the track. It is recommended that
a distance of 1/2-1 in (13-25 mm) be maintained between the bottom of drapery panel and the floor.
Bottom of
drapery track
Top of
drapery panel
4 in
(100 mm)
5/8 in
(16 mm)
Top of
Drapery window
panel
height +
5/81 1/8 in
(16-29
mm)
Bottom of
drapery panel
1/2 in (13 mm)
Floor
1/2-1 in (13-25 mm)
Drapery fabric return
Drapery fabric
Return size minimum
4.68 in (119 mm)
minimum for wall
mount bracket
9.68 in (246 mm)
minimum for dual
mount bracket
Job Name:
Job Number:
S p e c i f i c at i o n S u b m i t ta l
Model Numbers:
Page 14
Lutron®
Drapery Track System
Chassis Specification
086-123 15 06.11.10
Ripplefold | Drapery tape assembly
The bottom of the drapery track is to be mounted such that it is located a distance of 1/2 in (13 mm) + drapery
panel height from the floor. Drapes are typically sized so the bottom of the drapery track and top of the drapery
panel are located 4 in (101 mm) above the window casing. Location may need to be adjusted to accommodate
the specific drapery panel height and application. It is recommended that a space of 1/2-1 in (13-25 mm) be
maintained between the bottom of drapery panel and the floor.
Center draw master carriers
(Center-draw tracks only)
Idler end snap
bracket
Drive-end snap bracket
4 in
(101 mm)
Top of snap tape and
drapery panel
Top of
window
Drapery panel
height +
3/4-1 1/4 in
(19-32 mm)
Floor
1/2-1 in
(13-25 mm) Minimum
Bottom of
drapery panel
1/2 in
(13 mm)
3/4 in
(19 mm)
Snap tape
Drapery panel
One-way draw
One way draw
master carrier
Auxiliary Snap
locations
Drive end snap
bracket
Auxiliary Snap
locations
Drive end snap
bracket
Center draw
Idler end snap bracket
Job Name:
Job Number:
Center Draw
Master Carrier
S p e c i f i c at i o n S u b m i t ta l
Model Numbers:
NOTES
•
Drapery track
system compatible
with Graber
ripplefold snap tape
•
Tracks available in
3 fullness factors:
80%, 100%, 120%
Page 15
Lutron®
Drapery Track System
Chassis Specification
086-123 16 06.11.10
Ripplefold | Drapery tape assembly (continued)
The Ripplefold drapery snap tape is attached to the top of the drapery panel by the drapery manufacturer. The
number of snaps required is based on the Track Width, Draw Type and Fullness of the drapery. Refer to the Shade
Configuration Tool (SCT) for the number of snaps required per panel for the given specifications. Left draw and
Right draw configurations require one drapery panel. Center draw and Tandem draw configurations require two
drapery panels. The Lutron Ripplefold drapery system is compatible with Graber snap tape, which has a spacing
of 4 1/4 in (108 mm) between snaps. The Buttmaster Carriers and the End Snap Brackets, require the outermost
snap on both ends of the snap tape to be spaced 1 in (25 mm) from the adjacent snaps.
Left Draw and Right Draw Configurations
Number of Panels — 1
Snap Tape Type — Graber
Inner Snap Spacing — 4 1/4 in (108 mm) typical
End Snap Spacing — 1 in (25 mm)
Snaps Per Panel — Varies based on Track Width, Draw Type and Fullness.
Refer to Shade Configuration Tool (SCT) for exact snap quantity.
1 in
(25 mm)
1 in
(25 mm)
Varies based
on return distance
Varies based
on return distance
4 1/4 in
(108 mm)
4 1/4 in
(108 mm)
4 1/4 in
(108 mm)
4 1/4 in
(108 mm)
1 in
(25 mm)
typ
Snap Tape
Drapery Panel
Center Draw and Tandem Draw Configurations
Number of Panels — 2
Snap Tape Type — Graber
Inner Snap Spacing — 4 1/4 in (108 mm) typical
End Snap Spacing — 1 in (25 mm)
Snaps Per Panel — Varies based on Track Width, Draw Type and Fullness.
Refer to Shade Configuration Tool (SCT) for exact snap quantity.
1 in
(25 mm)
Varies
based on return
distance
1 in
(25 mm)
4 1/4 in
(108 mm)
4 1/4 in
(108 mm)
4 1/4 in
(108 mm)
4 1/4 in
(108 mm)
Snap Tape
Job Number:
Varies based
on return
distance
1 in
(25 mm)
1 in
(25 mm)
typ
4 1/4 in
(108 mm)
4 1/4 in
(108 mm)
4 1/4 in
(108 mm)
4 1/4 in
(108 mm)
Snap Tape
Drapery Panel
Job Name:
1 in
(25 mm)
S p e c i f i c at i o n S u b m i t ta l
Model Numbers:
Drapery Panel
Page 16
Varies
based on return
distance
Lutron®
Drapery Track System
Ripplefold | Manual open stackback characteristics
Chassis Specification
086-123 17 06.11.10
Note: Ripplefold drapery tracks with manual open feature will have two fixed ripplefold pleats at the master
carrier that do not compress when the drapery opens. This will result in approximately 3 in (76 mm) more
stackback per fabric panel than a standard ripplefold drapery panel.
Standard ripplefold
drapery stackback
3 in (76 mm) additional stackback
with manual open master carrier
2 fixed ripplefold pleats
Job Name:
Job Number:
S p e c i f i c at i o n S u b m i t ta l
Model Numbers:
Page 17