| Arc Accessories 9

Arc Accessories
1
9
Arc Accessories |
Afrox Product Reference Manual
9 | Arc Accessories
| Arc Accessories
2
Arc Accessories
Afrox Product Reference Manual
Section 9 - Arc Accessories
1
Electrode Holders
3
Welding Cable & Connectors
4
Earth Clamps & Welding Ancillaries
6
Cleaning & Preparation Products
7
Abrasives
9
Gouging Torches & Electrodes
10
TIG Tungsten
11
9
Arc Accessories
3
Arc Accessories |
Back to contents
Afrox Product Reference Manual
Electrode Holders
Afrox offers jaw and twist lock type electrode holders. The
electrical capacity of the electrode holder must always be
greater than the amperage in use – for instance, to carry
300 A, the electrode holder capacity should be at least
400 A. Damaged electrode holders can cause electric shock
and even death and must be carefully maintained. Factors
determining choice of an electrode holder:
1.
Diameter of the electrode
2.
Amperage required
3.
Diameter of the cable used
4.
Customer preference for jaw type or twist lock.
Electrode Holder
Fully insulated holder made of robust glass fibre material. A well
balanced holder, with grub screw fitting that gives positive and
easy cable connection. Fully insulated heavy duty heat resistant
fibreglass construction ensures high performance under arduous
conditions
Description
Item Number
Twist 400 A up to 5,0 mm
W054202
Twist 600 A up to 8,0 mm
W054204
Electrode Holder
9
Heat resistant insulation, sturdy copper alloy jaw. Powerful allposition electrode grip allows ultra-quick electrode changes.
Heavy duty construction with double ball point cable
connections
Description
Item Number
Safegrip Jaw Type 300 A up to 4,0 mm
W054200
Safegrip Jaw Type 400 A up to 5,0 mm
W054201
Safegrip Jaw Type 500 A up to 5,0 mm
W054203
Safegrip Jaw Type 600 A up to 8,0 mm
W054208
Electrode Holder
Fully insulated electrode holder for a small welding machine.
Fully insulated holder, heavy duty heat resistant construction
ensures high performance
Electrode Holder
A fully insulated holder where smaller electrodes are used on
portable small machines. For use in light to medium fabrication
Description
Item Number
Suhan Jaw Type 300 A 1,6 - 4,0 mm
W053090
Suhan Jaw Type 500 A up to 5,0 mm
W053092
Electrode Holder
Heat resistant insulation, copper jaw electrode allows quick
electrode changes. Heavy duty construction, powerful all
positional electrode allows ultra-quick electrode changes
Description
Item Number
Description
Item Number
Jackson Type 300 A 1,6 - 5,0 mm
W053097
Optimus 300 A up to 5,0 mm
W053095
Electrode Holder Jackson Type 500 A
W053098
Optimus 400 A up to 5,0 mm
W053096
Back to contents
Afrox Product Reference Manual
| Arc Accessories
Arc Accessories
Welding Cable & Connectors
4
Welding Cable
Afrox welding cable is available with a choice of rubber and
PVC insulation. Rubber-insulated cable is recommended for use
outdoors and is available in different amperages and duty cycles.
PVC-insulated cable is used indoors only and is also available in a
range of amperages.
Rated Area
(mm )
2
100%
Welding current in amps for duty cycle of:
85%
60%
30%
20%
Colour
Item Number
Natural Rubber Selection Guide
16
99
110
130
180
210
Black/Green
W053009
25
130
145
170
245
295
Black/Blue
W053010
35
165
180
215
305
370
Black/Grey
W053007
50
210
230
275
385
470
Black/Red
W053008
70
265
285
410
580
710
Black/Brown
W053015
95
315
345
410
580
710
Black/Yellow
W053016
PVC Selection Guide
16
110
120
145
200
250
Green
W053100
25
150
165
195
275
340
Blue
W053101
35
185
200
240
340
415
Grey
W053102
50
230
250
300
420
520
Red
W053103
70
290
315
380
530
650
Brown
W053104
95
355
385
465
650
800
Yellow
W053105
Description
Dimensions
Colour
Item Number
PVC Welding Cable
25 mm x 5 m
Blue
W053107
PVC Welding Cable
35 mm x 5 m
Grey
W053108
PVC Welding Cable
50 mm x 5 m
Red
W053109
PVC Welding Cable
25 mm x 10 m
Blue
W053110
PVC Welding Cable
35 mm x 10 m
Grey
W053111
PVC Welding Cable
50 mm x 10 m
Red
W053113
Classes of
Welding
Automatic
(Submerged arc, MIG)
Manual
(MMA, HG)
Semi-automatic (MIG, MAG, flux cored)
Very
intermittent
(MMA, MIG,
MAG, HG)
9
Arc Accessories
5
Arc Accessories |
Afrox Product Reference Manual
Cable Connectors
Solid brass camlock-style cable connectors in two sizes
connect welding cable quickly and easily with a quarter
turn. Will not slip or disconnect if cable is pulled. Hard
rubber sheath insulates the connection. Cable connectors are
precision machined to provide a very tight connection which
greatly improves power flow. Cam action pulls the two halves
tightly together. Covers are made from a temperature resistant
material which is not susceptible to rust or corrosion.
Lugs
Cable lugs are made from pure copper material. Solid
construction and long life make these lugs good value for
money. The ends are flared for easy installation.
Cable Clamp Connector 1,25
Cable Connector
Description
Item Number
CC 20 Plug/Socket
W054154
CC 20 Plug
W054155
CC 20 Socket
W054156
Item Number
W053027
Cable Lugs
9
Cable Connector CC 18 Socket
Item Number
W054152
W054151
Plug, Welding Male (50 - 70)
Item Number
Item Number
200 A 14 mm Fixing Hole
W053021
150 A 13 mm Fixing Hole
W053022
300 A 17 mm Fixing Hole
W053023
Cable Lugs Crimping
Cable Connector CC 17 Plug
Item Number
Description
W033718
Description
Item Number
35 x 12 mm
W053011
50 x 12 mm
W053012
70 x 12 mm
W053013
95 x 12 mm
W053014
Back to contents
Afrox Product Reference Manual
| Arc Accessories
Earth Clamp
Arc Accessories
Earth Clamps & Welding Ancillaries
Earth Clamp
Description
Item Number
Description
Item Number
600 A TRC Screw Type
W054147
150 A Crocodile
W053025
600 A EC Screw Type
W054149
300 A Crocodile
W054146
600 A Crocodile
W054148
Wire Brush 6 Row Stainless Steel
Item Number
9
W053081
Hot Box
Wire Brush 5 Row Mild Steel
Item Number
Description
Item Number
220 V Thermostat Controlled
W052005
110 V AC/DC 10 kg
W052001
W053003
Welding Screen 2 x 3 m
Chipping Hammer
Flame retardant dipped
Excludes stands
Steel heavy duty long life hammer
Item Number
6
W053020
Item Number
W092020
Arc Accessories
7
Arc Accessories |
Back to contents
Afrox Product Reference Manual
Cleaning & Preparation Products
Penetrant, Developer and Remover
Afrox offers a non-destructive range of testing products. These
are used to identify weld defects and clean the affected area
before welding.
Pickling and Passivating Paste
To improve your stainless steel weld quality after welding, apply
Afrox’s pickling and passivating paste. It forms a thin layer that
will protect your welds from corrosion and rust.
Anti-Spatter
Afrox offers a variety of anti-spatter to meet customer
requirements. We have a non-silicone based anti-spatter as
well as a water based version. The latter does not contain
hydrocarbons which makes it environmentally friendly.
NDT - Ardrox HF-P Remover 300 g
Item Number
W033572
9
NDT - Ardrox HF-P Penetrant 300 g
Item Number
W033570
Anti-Spatter
NDT - Ardrox HF-P Developer 300 g
Item Number
W033571
Description
Item Number
Spatter Off (Water based)
W034009
Spatter Release 640 NO/SI 500 ml
W034010
TRC Spatter Release Aerosol 500 ml
W034015
| Arc Accessories
8
Arc Accessories
Afrox Product Reference Manual
Pickling Paste AOX 1 l
Passivating Paste AOX 1 l
Item Number
W053574
Item Number
W053575
9
Anti-Spatter AOX Liquid Refill 5 l
Anti-Spatter AOX Liquid 500 ml
Item Number
W034013
Afrox Torch Coolant 5 l
Item Number
W053576
Item Number
W034014
Arc Accessories
9
Arc Accessories |
Afrox Product Reference Manual
Abrasives
Grinding Disc
Description
Item Number
115 x 6,4 x 22
Depressed Centre Metal Grinding Disc
W053287
230 x 7,2 x 22
Depressed Centre Metal Grinding Disc
W053291
Cutting Disc
9
Description
Item Number
115 x 3,0 x 22
Flat Metal Cutting Disc
W053285
115 x 1,0 x 22
T41 Slimline Flat Metal Cutting Disc
W053273
230 x 1,9 x 22,2
Two-in-One Cutting Disc
W053275
230 x 3,0 x 22
Flat Metal Cutting Disc
W053279
350 x 4,0 x 40
Flat Metal Cutting Disc
W053274
Flap Disc
Description
Item Number
115 x 22
Sandflex Flap Disc AZ40
W053241
115 x 22
Sandflex Flap Disc AZ60
W053243
115 x 22
Sandflex Flap Disc AZ80
W053245
115 x 22
Sandflex Flap Disc AZ120
W053247
Back to contents
Afrox Product Reference Manual
| Arc Accessories
Gouging Torches & Electrodes
The Transarc® range of carbon gouge electrodes are designed
for the air carbon gouging metal removal process which melts
metal with an electric arc, then dynamically removes it with a
jet of compressed air. The carbon electrodes contain a precisely
formulated blend of carbon and graphite that produces the most
efficient metal removal performance.
Features and Benefits
10
Arc Accessories
Back to contents
They offer excellent arc stability, superior metal removal rates,
resistance to breakage, heat and oxidation, and have a uniform
diameter resulting in clean slag-free grooves. Metals that can
be gouged with the process include steel, high carbon alloys,
stainless steel, copper and cast iron. The air carbon cutting
process can also be used for cutting metals that are not readily
cut by the oxy-fuel gas cutting process.
Gouging Torches
Heavy duty with swivel cable 1 000 A
Heavy duty metal removal applications such as weld
preparations in the pressure vessel shops and shipyards
Description
Item Number
Gouging Gun K4000 Arcair
W054311
Swivel Cable 2,13 m
W054275
9
Carbon Gouge Electrodes
Description
Item Number
Carbon Gouge TRC 8 x 305 mm (Pack of 50)
W054918
Carbon Gouge TRC 5 x 305 mm (Pack of 100)
W054934
Carbon Gouge Joint TRC 9,5 x 355 mm (Pack of 50)
W054933
Carbon Gouge Joint TRC 13,0 x 355 mm (Pack of 50) W054926
Carbon Gouge Joint TRC 16 x 355 mm (Pack of 50)
W054922
Carbon Gouge TRC 9,5 x 305 mm (Pack of 50)
W054919
Carbon Gouge TRC 6,4 x 305 mm (Pack of 50)
W054917
Carbon Gouge TRC 4,0 x 305 mm (Pack of 100)
W054915
Arc Accessories
11
Arc Accessories |
Afrox Product Reference Manual
Back to contents
TIG Tungsten
Zirconiated TIG Electrodes (White tips)
- Pack of 10
Description
Item Number
Wolfram 2% Zirconiated 4,0 mm
W030925
Wolfram 2% Zirconiated 3,2 mm
W030004
Wolfram 2% Zirconiated 2,4 mm
W030005
Wolfram 2% Zirconiated 1,6 mm
W030907
Zirconiated tungsten electrodes exhibit good performance
characteristics in AC welding, especially under high load
current. These electrodes can retain a balled end when welding,
which results in less tungsten permeation and good corrosion
resistance. It balls up well in AC welding and has a more stable
arc than pure tungsten. Displays excellent performance in high
load AC welding. Not replaceable by any other electrodes.
Resists contamination well in AC welding.
Application: Zirconiated tungsten is most commonly used for AC
welding of aluminium and magnesium alloys. Preferred when
tungsten contamination of weld is intolerable.
The surface condition of zirconiated tungsten electrode is polish
grounded. It is bright and tipped with the brown and white
colour for its different composition of zirconium in tungsten
zirconiated electrode.
Witstar TIG Tungsten (Teal tips)
- Pack of 10
9
Description
Item Number
Witstar TIG Tungsten 4,0 mm
W031003
Witstar TIG Tungsten 3,2 mm
W031002
Witstar TIG Tungsten 2,4 mm
W031012
Witstar TIG Tungsten 1,6 mm
W031014
Witstar TIG Tungsten 1,2 mm
W031018
Witstar TIG electrodes are made from rare earth materials. They
are safe to use and not harmful, unlike thoriated tungsten which
is radioactive. Witstar TIG electrodes are used for alloyed and
non-alloyed metals, alloyed and non-alloyed coppers, nickel and
nickel alloys, aluminium and aluminium alloys, magnesium and
magnesium alloys, and titanium and titanium alloys.
Transarc® Thoriated TIG Tungsten (Red tips)
- Pack of 10
Description
Item Number
Transarc® 2% Thoriated 3,2 mm
W031032
Transarc 2% Thoriated 2,4 mm
W031024
Transarc 2% Thoriated 1,6 mm
W031016
®
®
Thoriated tungsten electrodes provide excellent resistance
against weld pool contamination while at the same time offer
the welder easier arc starting capabilities and a more stable
arc. Thoriated tungsten electrodes are the most commonly used
tungsten material; thoria is low-level radioactive material, but
it is was the first to display a significant improvement over pure
tungsten.
Application: Thoriated tungsten electrodes are generally used
in DC electrode negative or straight polarity applications such
as carbon & stainless steels, nickel alloys and titanium, as they
operate well even when overloaded with extra amperage, then
improving the performance of welding.
| Arc Accessories
12
Arc Accessories
Afrox Product Reference Manual
9
So efficient, others are seeing red
Industrial
High power with great performance. Uncomplicated,
fully adjustable settings. Greater control across
welding applications, including flux cored or gasless
welding. Afrox now offers you a range of heavyweight, efficient, industry-leading MIG welding
machines.
AFROX Customer Service Centre: 0860 020202
Email: customer.service@afrox.linde.com
www.afrox.com