PDF unit guide - Faculty of Business and Economics
Transcription
PDF unit guide - Faculty of Business and Economics
ACW2851 Accounting information systems and financial modelling Unit Guide Semester 1, 2015 Copyright © Monash University 2014. All rights reserved. Except as provided in the Copyright Act 1968, this work may not be reproduced in any form without the written permission of the host Faculty and School/Department. The information contained in this unit guide is correct at time of publication. The University has the right to change any of the elements contained in this document at any time. Last updated: 03 Mar 2015 Table of Contents ACW2851 Accounting information systems and financial modelling - Semester 1, 2015..................1 Mode of Delivery..............................................................................................................................1 Workload requirements....................................................................................................................1 Additional workload requirements........................................................................................1 Unit Relationships........................................................................................................................................1 Prerequisites....................................................................................................................................1 Prohibitions......................................................................................................................................1 Chief Examiner(s)........................................................................................................................................1 Campus Lecturer(s).....................................................................................................................................2 Malaysia...........................................................................................................................................2 Tutor(s)........................................................................................................................................................2 Malaysia...........................................................................................................................................2 Your feedback to Us....................................................................................................................................2 Previous Student Evaluations of this Unit....................................................................................................2 Academic Overview...................................................................................................................................3 Learning Outcomes.........................................................................................................................3 Unit Schedule.............................................................................................................................................4 Teaching Approach..........................................................................................................................5 Assessment Summary.....................................................................................................................5 Hurdle Requirements...........................................................................................................6 Second marking...................................................................................................................6 Return of final marks............................................................................................................6 Exam viewing.......................................................................................................................7 Assessment criteria..............................................................................................................7 Assessment Requirements......................................................................................................................8 Assessment Tasks...........................................................................................................................8 Assessment task 1...............................................................................................................8 Assessment task 2...............................................................................................................8 Assessment task 3...............................................................................................................9 Examination(s).............................................................................................................................................9 Examination 1..................................................................................................................................9 Learning resources....................................................................................................................................10 Feedback to you........................................................................................................................................10 Assignment submission.............................................................................................................................10 Online submission.........................................................................................................................10 Prescribed text(s) and readings.....................................................................................................10 Examination material or equipment...........................................................................................................10 Other Information....................................................................................................................................12 Policies..........................................................................................................................................12 Graduate Attributes Policy.................................................................................................12 Student Charter.........................................................................................................................................12 Student services........................................................................................................................................12 Monash University Library.........................................................................................................................12 Moodle 2....................................................................................................................................................12 Disability Liaison Unit................................................................................................................................13 ACW2851 Accounting information systems and financial modelling - Semester 1, 2015 The objective of this unit is two-fold. First, the unit provides students with a broad introduction to accounting information systems and the role technology plays in accounting. The focus will be on an introduction to: enterprise systems; database management; documentation methods; internal controls; and the core business processes found in organisations. Second, the unit focuses on corporate modelling theory; models as decision support tools; types and uses of models; benefits and limitations of models; effective spreadsheet design; auditing spreadsheet models and development of various models using an industry standard spreadsheet. Mode of Delivery Malaysia (Day) Workload requirements Minimum total expected workload to achieve the learning outcomes for this unit is 144 hours per semester typically comprising a mixture of scheduled learning activities and independent study. Independent study may include associated readings, assessment and preparation for scheduled activities. The unit requires on average three/four hours of scheduled activities per week. Scheduled activities may include a combination of teacher directed learning, peer directed learning and online engagement. See also Unit timetable information Additional workload requirements In addition to class attendance you are expected to spend another 9 hours per week on independent work, including assignments and exam preparation, and preparation for tutorials. Unit Relationships Prerequisites Students must have passed one unit from the following: AFG1000, ACG1000, AFP1000, ACP1000, AFW1000, ACW1000 or AFW1001 (pre 2009) before undertaking this unit. Prohibitions AFC2160, AFC2851, ACC2851, AFF2051, AFF2851, ACF2851, AFG2851, ACG2851, AFP2851, ACP2851, AFW2051, BUS1060, BUS3030, AFW2851 Chief Examiner(s) Dr Siew Eu-gene 1 ACW2851 Accounting information systems and financial modelling - Semester 1, 2015 Campus Lecturer(s) Malaysia Dr Siew Eu-Gene Campus: Malaysia Phone: +60 3 5514 4934 Email: Siew.Eu-Gene@monash.edu Tutor(s) Malaysia Mr Ravindra Narayanan Campus: Malaysia Email: Ravindra.Narayanan@monash.edu Suhaily Shahimi Your feedback to Us Monash is committed to excellence in education and regularly seeks feedback from students, employers and staff. One of the key formal ways students have to provide feedback is through the Student Evaluation of Teaching and Units (SETU) survey. The University’s student evaluation policy requires that every unit is evaluated each year. Students are strongly encouraged to complete the surveys. The feedback is anonymous and provides the Faculty with evidence of aspects that students are satisfied and areas for improvement. For more information on Monash’s educational strategy, see: www.monash.edu.au/about/monash-directions/ and on student evaluations, see: www.policy.monash.edu/policy-bank/academic/education/quality/student-evaluation-policy.html Previous Student Evaluations of this Unit If you wish to view how previous students rated this unit, please go to https://emuapps.monash.edu.au/unitevaluations/index.jsp 2 Academic Overview Learning Outcomes The learning goals associated with this unit are to: 1. examine the role of accounting information systems in analysing and providing decision support to managers 2. explain the design of accounting information systems and financial models 3. develop financial models to assist in decision making 4. apply critical thinking, problem solving and presentation skills to individual and / or group activities dealing with accounting information systems and demonstrate in an individual summative assessment task the acquisition of a comprehensive understanding of the topics covered by ACW2851. 3 Unit Schedule Week Activities 0 Assessment No formal assessment or activities are undertaken in week 0 1 Unit introduction - Objectives; texts; assessment; weekly activities. Introduction to systems, accounting information systems and information technology (AIS and IT). 2 Introduction to decision support systems, spreadsheet model errors, and spreadsheet model design principles. 3 Applying basic financial mathematics and conditional logic in financial models (for example, using Excel IF and VLOOKUP functions). 4 Exploring data variations within financial models using various modelling techniques (scenario, sensitivity, and goal seek analysis), and probabilistic modelling. 5 Optimisation models - Introduction to optimisation concepts and the development of models using Excels Solver tool. 6 Documenting AIS - need for; tools used; and interpretation thereof. 7 Introduction to database systems - importance to AIS and basic design principles. 8 AIS and business processes - collecting and reporting information; core and other business processes; monitoring business processes. 9 Accounting and enterprise software - small, mid-range Essay Writing and specialised accounting systems; enterprise-wide software. Accounting on the Internet - intranets; extranets; HTML; XBRL; electronic commerce; privacy and security concerns. 10 Computer crime, abuse and fraud - examples and mitigation strategies. Ethical issues, privacy and security concerns. Introduction to internal control systems (ICS) - definitions; types; and control activities. 11 Computer controls for organisations and AIS general and application controls. Assessing the design of a system of internal control - using a control matrix. 12 Developing and implementing AIS - stages in a systems development life cycle. Test 1 Test 2 SWOT VAC No formal assessment is undertaken SWOT VAC Examination period LINK to Assessment Policy: http://policy.monash.edu.au/policy-bank/ academic/education/assessment/ assessment-in-coursework-policy.html 4 Unit Schedule Teaching Approach This unit will be taught as a two-hour lecture and a one-hour tutorial each week for 12 weeks. Lectures highlight the key concepts covered in each topic and direct students to further reading from the textbook and other resources, such as those provided on the ACW2851 Moodle site and library electronic reading list. The lecture slides will be provided on the ACW2851 Moodle site each week prior to the lecture. Notes should also be taken at lectures to supplement these lecture slides. The lectures will provide you with an overview of your learning objectives for each week and an introduction to some of the more important/difficult issues to be addressed by students in their self-directed learning during that week. Since there is not enough time to cover every single aspect during lectures it is expected that you will read and summarise the relevant textbook chapters and other resources. The textbook is a custom publication from several books, and you will also be required to read chapters provided in the library electronic reading list for ACW2851. You should allocate several hours a week to reading and summarising these chapters and preparing for tutorials, and raise with tutors or the lecturer any difficulty you have in understanding the material. Class test and examination questions will include material you have been asked to read from the textbook and library electronic reading list, plus material discussed in lectures and tutorials. Tutorials will include discussion and presentations of case studies, and completion of assigned work. It is expected that students prepare answers to the tutorial questions provided in Moodle prior to the tutorials and to participate in tutorial class discussions. Additional case studies will occasionally be distributed and briefly discussed during lectures and tutorials, and students will be expected to have developed further answers in preparation for tutorial discussions. For the tutorials in weeks 3-6, you will developed financial models using Micosoft Excel in the computer laboratories. You may need to demonstrate, clarify and explain to your tutor your solutions. In general you are expected to spend two to three hours of self-directed study for each hour in class. To ensure a high probability of successfully completing this unit, you need to manage your time and studies in a systematic way. At a minimum this should involve: • reading prescribed and selected recommended material prior to attending lectures; • completing week-by-week tutorial activities tasks prior to attending tutorials; • attempting questions from past final examination papers provided to you in the unit examination memo; • discussions with past and present students; and • revision of the semester's work during the SWOT-Vac and prior to the final examination. Assessment Summary Within semester assessment: 30% Examination: 70% Assessment Task Value Due Date Class test 1 10% The class test is held commencing Week 7 (20 to 24 April). You must go to your allocated tutorial to do the class test. Essay Writing 10% The essay writing is held commencing Week 9 (4 to 8 May). You must go to your allocated tutorial to do the essay writing Class Test 2 10% 5 Unit Schedule The class test is held commencing Week 11 (18 to 22 May). You must go to your allocated tutorial to do the class test. Examination 1 70% To be advised Hurdle Requirements There is a hurdle requirement for this unit. The learning outcomes of this unit require you to demonstrate a comprehensive understanding of the topics covered in the unit. Hence the hurdle requirement for this unit requires that you must attain a mark of at least 50% in the final examination. If you fail the unit solely because of failure to satisfy the hurdle requirement, a mark of 48 will be determined by the faculty's Board of Examiners on the recommendation of the unit's Chief Examiner. The outcome from application of the hurdle requirement is often misunderstood by students who are awarded 48N. For example, some students mistakenly believe that 48N means they failed the final examination by two marks and that a second re-mark of their examination paper might find two extra marks. Whereas 48N does not provide any indication of the mark attained in the final examination other than a mark less than 50% was awarded. The following example should make the application of the hurdle requirement clear. In this unit 30% of the assessment regime is allocated to in-semester assessment and 70% to the final 3-hour examination. A student enrolled in this unit might achieve 25 out of 30 for their in-semester assessment and 30 out of 70 for the final examination. While the overall total of these marks is 55P the final examination mark is five marks below the required 50%. Consequently a mark of 48N will be determined by the faculty's Board of Examiners on the recommendation of the unit's Chief Examiner. Second marking Where an assessment task is given a fail grade by an examiner, that piece of work will be marked again by a second examiner who will independently evaluate the work, and consult with the first marker. No student will be awarded a fail grade for an assessment task or unit without a second examiner confirming the result. Note: Exceptions to this are individual pieces of assessment contributing 10% or less of the final mark, unless the total of such pieces exceeds 30% of the final mark. Return of final marks Faculty policy states that 'the final mark that a student receives for a unit will be determined by the Board of Examiners on the recommendation of the Chief Examiner taking into account all aspects of assessment'. The final mark for this unit will be released by the Board of Examiners on the date nominated in the Faculty Calendar. Student results will be accessible through the my.monash portal. 6 Unit Schedule Exam viewing Feedback on student performance in examinations and other end-of-semester assessment is required, in accordance with the University procedures on Unit Assessment. For more information, please see the following URL: http://www.buseco.monash.edu.au/acc/student/exam-view/index.html Assessment criteria Assessment Criteria Grading Descriptors available at: http://www.buseco.monash.edu.au/esg/agu/policies/assessment.html. 7 Assessment Requirements Assessment Tasks • Assessment task 1 Title: • Class test 1 Due date: The class test is held commencing Week 7 (20 to 24 April). You must go to your allocated tutorial to do the class test. Details of task: The first class test will require students to write out formulas for a small Excel-based financial model (selected by tutors from a range of models, which may vary between tutorials). These tests will be closed book and exist to encourage review of the modelling components of the unit, to remove some of the burden of revision prior to the exam; to provide feedback on how you are doing; and to get the “facts” in place so you can concentrate on analysis of concepts and theorising about ideas in modelling.The class test will be of 50 minutes duration. Weighting/Value: 10% Estimated return date: Marks and feedback for the class tests will be made available by your tutor during your tutorial in the week following your class test. These marks will also be available in your grade book on Moodle by the end of the following week. These interim marks are a vital part of the feedback you receive. Criteria for marking: Overall, the work submitted for assessment will be graded in accord with the table showing examples of grades and corresponding achievement levels published in the Q Manual (2012, p.6). Learning objectives assessed: This assessment task is designed to test your achievement of learning objectives 2, 3, and 4. Assessment task 2 Title: Essay Writing Due date: The essay writing is held commencing Week 9 (4 to 8 May). You must go to your allocated tutorial to do the essay writing Details of task: The essay writing assessment will require students to write out reports regarding certain issues in AIS. The essay writing will be closed book and must be done during the allocated tutorials. The research topic will be given two weeks before the essay writing dateline. The purpose of the essay writing is to encourage critical thinking, broader readings of the materials than the prescribed readings, understanding of key concepts and ideas, and better academic writing. The essay writing will be of 50 minutes duration. Weighting/Value: 10% Estimated return date: 8 Assessment Requirements Marks and feedback for the class tests will be made available by your tutor during your tutorial in two weeks following your class test. The feedback is important to allow you to improve on your academic writing and understanding of key concepts and issues. Criteria for marking: Overall, the work submitted for assessment will be graded in accord with the table showing examples of grades and corresponding achievement levels published in the Q Manual (2012, p.6). Learning objectives assessed: This assessment task is designed to test your achievement of learning objectives 1, 2, and 4. • Assessment task 3 Title: Class Test 2 Due date: The class test is held commencing Week 11 (18 to 22 May). You must go to your allocated tutorial to do the class test. Details of task: The second class test will consist of 40 multiple choice questions based upon AIS materials covered up to week 10. These tests will be closed book so that you would review the AIS components of the unit. This objective is to provide feedback on your understanding of AIS concepts prior to the exam. The class test will be of 20 minutes duration. Weighting/Value: 10% Estimated return date: Marks and feedback for the class tests will be made available in your grade book on Moodle by the end of the week. These interim marks are a vital part of the feedback you receive. Criteria for marking: Overall, the work submitted for assessment will be graded in accord with the table showing examples of grades and corresponding achievement levels published in the Q Manual (2012, p.6). Learning objectives assessed: This assessment task is designed to test your achievement of learning objectives 1, 2, and 4. Examination(s) • Examination 1 Weighting: 70% Length: 3 hours Type (open/closed book): Closed book Electronic devices allowed in the exam: Electronic devices (including calculators) are not permitted in tests and examinations in this unit unless identified with an “approved for use” label. These labels are available from the Course Management Office (Building 6, Level 4). 9 Assessment Requirements Learning resources Monash Library Unit Reading List (if applicable to the unit) http://readinglists.lib.monash.edu/index.html Feedback to you Types of feedback you can expect to receive in this unit are: • Informal feedback on progress in labs/tutes • Test results and feedback • Quiz results Assignment submission Online submission If Electronic Submission has been approved for your unit, please submit your work via the learning system for this unit, which you can access via links in the my.monash portal. Prescribed text(s) and readings The book is available from the Monash Bookshop. The textbook details are: Beaman, I., Ceglowski, A., & Krueger, P. (Eds.). (2012). Accounting information systems and modelling (2nd ed.). Milton, Qld: John Wiley & Sons Australia. (ISBN 9781118337783) Source Text Contents: content is printed within this custom publication in the order below: Bagranoff, N. A., Simkin, M. G., & Norman, C. S. (2008). Core concepts of accounting information systems (10th ed.). John Wiley & Sons. Chapters 1–10. (ISBN 9780470045596) Beaman, I., Ratnatunga, J., Krueger¸P., & Mudalige, N. (2006). Financial modelling (4th ed.). Melbourne, Quill Press, Chapters 2¸ 3, 11¸ 12. (ISBN 9780958567954) Black, K., Asafu-Adjaye, J., Khan, N., Perera, N., Edwards, P., & Harris, M. (2007). Australasian business statistics. John Wiley & Sons. Chapter 16. (ISBN 9780470809440) Powell, S. G., & Baker, K. R. (2007). Management science: The art of modeling with spreadsheets (2nd ed.). John Wiley & Sons. Chapters 6, 10, 11. (ISBN 9780470038406) The texts from Bagranoff et al, Beaman et al, Powell et al, and Black et al were taken verbatim from the original printed works, and printed in monochrome, in order to keep the cost of the prescribed textbook as low as possible. Examination material or equipment Electronic devices (including calculators) are not permitted in tests and examinations in this unit unless identified with an “approved for use” label. 10 Assessment Requirements These labels are available from the Course Management Office (Building 6, Level 4). 11 Other Information Policies Monash has educational policies, procedures and guidelines, which are designed to ensure that staff and students are aware of the University’s academic standards, and to provide advice on how they might uphold them. You can find Monash’s Education Policies at: www.policy.monash.edu.au/policy-bank/academic/education/index.html Key educational policies include: • Student Academic Integrity Policy and Student Academic Integrity: Managing Plagiarism and Collusion Procedures ; • Assessment in Coursework Programs; • Special Consideration; • Grading Scale; • Discipline: Student Policy; • Academic Calendar and Semesters; • Orientation and Transition; and • Academic and Administrative Complaints and Grievances Policy. Graduate Attributes Policy http://www.policy.monash.edu/policy-bank/academic/ education/management/monash-graduate-attributes-policy.html Student Charter www.opq.monash.edu.au/ep/student-charter/monash-university-student-charter.html Student services The University provides many different kinds of support services for you. Contact your tutor if you need advice and see the range of services available at http://www.monash.edu.au/students Monash University Library The Monash University Library provides a range of services, resources and programs that enable you to save time and be more effective in your learning and research. Go to www.lib.monash.edu.au or the library tab in my.monash portal for more information. Moodle 2 All unit and lecture materials, plus other information of importance to students, are available through the virtual learning environment Moodle site. You can access Moodle via the my.monash portal. Where to go for help If you're stuck, confused or simply not sure how to approach Moodle, there are a number of Moodle resources that you can tap into. 12 Other Information Disability Liaison Unit Students who have a disability or medical condition are welcome to contact the Disability Liaison Unit to discuss academic support services. Disability Liaison Officers (DLOs) visit all Victorian campuses on a regular basis. • Website: http://www.monash.edu/equity-diversity/disability/index.html • Telephone: 03 9905 5704 to book an appointment with a DLO; • Email: dlu@monash.edu • Drop In: Equity and Diversity Centre, Level 1, Building 55, Clayton Campus. 13