���������������� ������ - Noor Technology for General Trading, Contracting

1
Content
Company Profile
2
Our Certifications
4
Organization Chart
14
Our Projects
15
Workshop24
Our Showroom
28
PRODUCTS
High Tension Switchgears
32
Type Tested Panel (xEnergy)
34
MCCBs36
ACB38
MCBs39
Contactors & Overloads
41
Plug-in & Timing Relays
42
Lighting & PushButtons
43
Motor Protective Circuit Breaker
44
Soft Starter
45
Variable Speed Drive
46
Easy PLC
47
Industrial PLC & Remote I/O System
48
HMI PLC & UPS
49
SmartWire - Darwin Technology
50
Distribution Boards
51
Wiring Devices
54
Explosion Proof Equipment
55
Bus Duct
55
USA
Germany
Holland
UK
USA
France
UK
USA
EATON
‫نور تكنولوجيا‬
‫شركة نور التكنولوجيا للمقاوالت والتجارة العامة والوكاالت‬
‫التجارية احملدودة شركة عراقية تأسست سنة ‪2013‬‬
‫مستفادة من اخلربة السابقة لكادر الشركة يف استرياد‬
‫وتوزيع املعدات الكهربائية املتخصصة والتي تستخدم يف‬
‫الشبكات الكهربائية واالبنية واملنازل وكذلك تصنيع وجتميع‬
‫لوحات الضغط املنخفض حسب شهادات التخويل احلاصلة‬
‫عليها الشركة من شركة ايتون االمريكية‪.‬‬
‫على مدى ثمان �سنني حتقق لل�شركة خربة جيدة يف بناء حمطات‬
‫القدرة ذات ال�ضغط الواطئ واملتو�سط وت�صنيع وبناء لوحات ال�ضغط‬
‫الواطئ املفحو�صة وتنفيذ امل�شاريع الكهربائية بكافة جماالتها‪.‬‬
‫أقسام الشركة‬
‫ق�سم املبيعات‪ :‬حيث متتلك ال�شركة معر�ضا ي�ضم كافة املنتجات‬
‫وح�سب وكالة التوزيع من �شركة ايتون‪.‬‬
‫ق�سم الت�صنيع‪ :‬حيث متتلك ال�شركة ور�شة خا�صة لت�صنيع‬
‫وجتميع لوحات التوزيع الكهربائية‪.‬‬
‫ق�سم امل�شاريع‪ :‬حيث متتلك ال�شركة كادرا فنيا مدربا وذو خربة‬
‫يف تنفيذ امل�شاريع الكهربائية بكافة جماالتها‪.‬‬
‫‪Company Profile‬‬
‫‪Noor Technology Contracting and General Trading and‬‬
‫‪Commercial Agencies Co. An Iraqi company established in‬‬
‫‪2013 building on the previous experience of the company’s‬‬
‫‪staff in the import and distribution of specialized electrical‬‬
‫‪equipment which are used in electrical networks, buildings‬‬
‫‪and houses. As well as the manufacture and assembly of‬‬
‫‪low voltage switchboard certified Eaton.‬‬
‫التدريب‬
‫‪Company Divisions‬‬
‫‪Cummins & Schneider Electric.‬‬
‫متكنت نور التكنولوجيا من ار�سال كوادرها اىل خارج العراق‬
‫وب�صورة م�ستمرة لغر�ض تلقي الدورات يف كافة املجاالت وذلك‬
‫ملعرفة ميزات وموا�صفات منتجات �شركة ايتون وهي حري�صة على‬
‫عملية تطوير الكوادر لغر�ض امل�ساهمة الفاعلة يف عملية التوزيع‬
‫والت�صنيع وتنفيذ امل�شاريع‪.‬‬
‫اخلربة‬
‫نور التكنولوجيا لديها خربة طويلة يف جمال الت�سويق واملبيعات‬
‫ملنتجات الطاقة الكهربائية من خالل عمل الكوادر يف املرحلة الشهادات‬
‫املا�ضية لتوزيع منتجات �شركة �شنايدر الفرن�سية وتنفيذ م�شاريعها‬
‫ويف الوقت احلا�ضر مع �شركة ايتون الأمريكية ‪.‬كما متتلك ال�شركة‬
‫اخلربة الكبرية يف ت�صميم وت�صنيع و�صيانة لوحات الطاقة الكهربائية‬
‫املختلفة ( لوحات التوزيع والتحكم االيل ولوحات اجلينج اوفر‬
‫والتزامن والتطبيقات الكهربائية االخرى)‪.‬‬
‫ �شهادة التخويل من ايتون االمريكية لتوزيع املنتجات الكهربائية‬‫ �شهادة التخويل من ايتون االمريكية لتجميع لوحات ال�ضغط الواطئ‬‫ �شهادة التدريب لكل منتجات �شركة ايتون‬‫ �شهادة التدريب لربنامج ت�صميم اللوحات الكهربائية اخلا�ص‬‫ب�شركة ايتون‬
‫‪3‬‬
‫‪Experience‬‬
‫‪NTC is divided into three main sections:‬‬
‫‪- Sales, as authorized distributor of Eaton in‬‬
‫‪Southern region of Iraq.‬‬
‫‪- Factory, as authorized panel builder of Eaton in‬‬
‫‪Southern region of Iraq.‬‬
‫‪- Projects, as NTC has a good experience in‬‬
‫‪execution the substation and electrical projects.‬‬
‫‪Noor Technology (NTC) has a long experience‬‬
‫‪in the field of marketing and sales for electric‬‬
‫‪power products (L.V & M.V) through the work‬‬
‫‪of cadres in the Eaton electric and Schneider‬‬
‫‪Electric in Iraq for more than 8 years. Also‬‬
‫‪Noor technology necessary expertise to deal‬‬
‫‪with the design, manufacture and maintenance‬‬
‫‪of electrical power panels (distribution, control,‬‬
‫‪automation, synchronization and other electrical‬‬
‫‪applications).‬‬
‫‪Training‬‬
‫‪Noor Technology managed the evolution of‬‬
‫‪technology engineering and technical cadres‬‬
‫‪to deal with the engineering and technical‬‬
‫‪characteristics of Eaton products through their‬‬
‫‪participation continuous training in accordance‬‬
‫‪with the curriculum and the manufacturer›s‬‬
‫‪instructions. Attached training certificates from‬‬
‫‪Authorization‬‬
‫‪NTC is authorized to assemble and sell panels‬‬
‫‪and all Eaton’s products in Iraq.‬‬
‫‪2‬‬
Our
Certifications
4
5
Organization Chart
General
Management
Sales Man
Sales Manager
Sales Engineer
Accountant
Our
Projects
Site Engineer (2)
Project Manager
Technicians (15)
Quality Control (2)
Designer (2)
Factory Manager
AutoCad Artist (1)
Estimation Engineer (1)
Technicians (5)
Accountant (1)
Storekeeper (1)
14
15
EXXON PROJECT
Switchgear for Exxon Mobil DS6 Extension Camp
DEscription
Install, test, commissioning and operation low
voltage switchgear type arc-free SWG consists
of:
- First incomer 6300A-4P.
- Second incomer 6300A-4P.
-Five incomers1600A-4P from 5 generators
1000KVA connected together as synchronizing
system and ATS with the First and Second
incomers.
-Outgoing circuit-breaker (different rating of
current).
-PLC type SIMATIC S7-300 with HMI touch
screen.
16
17
South Gas Company Project
Substation for Residential Complex
DEscription
Execution substation 33/0.4 KV for residential
complex of South Gas Company consists of:
- Civil work for building 8 x 16 meter.
-33KV switchgear (1 incomer 1250A and 4
outgoing 630A).
- L.V switchgear consists of: 2 incomer 4000A-4P
for utility, 1 incomer 4000A-4P for generator, 1
bus coupler 4000A-4P.
- Charger 100AH with batteries.
- 2 transformers 2MVA, 33/0.4 KV.
18
19
South Gas Company Project
Substation 5 for building in site SGC
DEscription
Execution substation 33/0.4 KV for building in
site of South Gas Company consists of:
- Civil work for building 8 x 17 meter.
-33KV switchgear (1 incomer 1250A and 4
outgoing 1250A).
- L.V switchgear consists of: 2 incomer 3200A-4P
for utility, 1 incomer 3200A-4P for generator, 1
bus coupler 3200A-4P.
- Charger 90AH with batteries.
- 2 transformers 2MVA, 33/0.4 KV.
20
21
Federal Court Project
Substation for Federal Court Project in Basra
DEscription
Execution substation 11/0.4 KV for Federal
Court in Basra consists of:
- 3 automatic transfer switch 1600A-3P.
- 3 transformers 1000KVA.
- Outgoings different rating of current.
- 3 generators 1000KVA.
22
23
Workshop
24
25
Workshop
26
27
Our Showroom
28
29
PRODUCT
OVERVIEW
31
Metal Clad Switchgear
Ring Main Unit
POWER XPERT UX
type XIRIA
Non-Extensible
Eaton has over 80 years experience in the
design, manufacture and application of Medium
Voltage switchgear. Millions of our vacuum
interrupters have been in operation in every
type of environment in the world, catering
for the widest range of applications. It is this
knowledge, understanding and experience
that make Eaton the logical choice for the safe
control and protection of distribution systems.
UX is particularly suited to provide control and
protection for cables, transformers, capacitors
and motors used across many industries.
They are characterised by their high level of
operational safety and are suitable for applications
up to 24 kV. Xiria units are also very compact.
Xiria units can be supplied in two-, three-, fouror five-panel versions. Both the primary part of
the unit and the mechanisms are housed in a
fully enclosed housing which protects the system
against environmental influences.
There is a choice of two basic panel versions in
our product range:
•A vacuum load break switch for ring cable
connections.
•A vacuum circuit-breaker for protecting
transformers and cable connections.
Metal Enclosed Switchgear
32
Both versions can be supplied in a unit in any
desired combination and order.
type SVS/8-SVS/12
type XIRIA Extensible
fully-enclosed epoxy resin insulated system with
integral vacuum interrupters. SVS is a compact,
modular system developed for medium voltage
applications up to 24 kV. With flexibility in
mind, the panels are assembled from modular
components including circuit-breakers, loadbreak switches, fuse holders, metering panels,
busbars and cable terminals. Eaton Holec is
recognised throughout the world as the leading
specialist in epoxy resin-based insulation
technology. Vacuum interrupters form the heart
of the Eaton Holec switchgear range. These
high-quality interrupters have been developed
and manufactured by Eaton Holec.
This ring main unit consists of a block containing
three panels. The Xiria family includes multiple
possibilities and configurations for Power
consumption metering. These configurations
are indicated as Xiria M-versions. M stands
for metering. The transformers for power
consumption metering can be either integrated
into the block-type Xiria switchgear or housed
in a separate metering panel. This dedicated
metering panel can be integrated with both the
current block type switchgear and the new single
extendable panels.
33
Type Tested Panel (xEnergy)
Features
BENEFITS
• IEC 61439-2
• Up to 5000 A, 100 KA/1s
• Modular flat pack system
• Main busbar options at rear & top
• flexible configuration
• Tested at 50C ambient
• Tested for IP55 & IK10
• Tested for internal arc fault
•A design-verified, modular and therefore fl
exible system
•Verified/safe assemblies of switchgear and
enclosures
• Combination with a large number of components
•A solution for all kinds of application (from
power distribution to motor control centers)
•Time-saving
•Optimal safety
•Delivery as fl at-pack or as a pre-assembled
switchboard cabinet
•Software tools and training for easy planning
and implementation
•Long service life, even under harsh operating
conditions
34
MCCB TYPE NZM
MCCB TYPE BZM
Compact circuit-breaker NZM up to 1600 A
Compact switch-disconnectors up to 1600 A
BZM1 for up to 125 A, the BZM2 for up to 250 A
& the BZM3 for up to 400 A
Model series NZM
Models Series BZM
The NZM Moulded Case Circuit Breakers range
up to 1600 A and incorporate four switches with
performance overlaps. These are available from
25 kA for small distribution boards up to 150
kA for complex high-energy systems. Switchdisconnectors up to 1600 A are available in the
same design with the same
With the BZM1 for up to 125 A, the BZM2 for
up to 250 A and the BZM3 for up to 400, Eaton
now also completes its range of products in the
segment of circuit breakers, allowing us to cover
all kinds of applications and requirements.
MCCB TYPE LZM
• Circuit Breaker BZM1(16 to 125 A)
• Circuit Breaker BZM2 (125 to 250A)
• Circuit Breaker BZM3 (250 to 400A)
• BZM1 & BZM2 & BZM3 Accessories
MCCB TYPE Series C
Model series LZM
Model series C
Reliably and safely controlling, switching and
managing power, in industry, in buildings and in
machine construction. Enabled by innovative
protection concepts.
The family includes seven frame sizes in ratings
from 16 to 2500 Amperes. Each frame size offers
a choice of several interrupting capacities up to
100 kA at 415 volts ac (200 kA at 240 volts ac).
• just 4 compact frame sizes
• available as 3 and 4-pole device
• now also up to 1600 A
• flexible mounting using modular function groups
• full rated current at 50 °C ambient temperature
• switch suitable for world-wide use
36
37
Air Circuit Breakers (ACB)
Type Magnum
Miniature Circuit Breaker –
Series mMC
Function
Protection against Overloads –a thermal delay (bimetal) release initiates the disconnecting process
and separates the contacts.
Protection against Short circuits -an electromagnetic
instantaneous release (hammer-armature) performs
the disconnecting process and separates the
contacts.
Meeting the challenge Common height
and depth
Magnum breakers are engineered specifically for
use in low voltage assemblies applied at nominal
voltages of 380, 415, 440, 500 and 690 Vac. Ten
continuous ratings – 800 A through 6300 A –
are covered with three frame sizes. Drawout and
fixed mounting units are available in 3 or 4 pole
designs. Controls and indicators are conveniently
grouped on the breaker’s front escutcheon where
they can be easily viewed and accessed through
a cutout door.
All three Magnum frame sizes have the
same identical height and depth to facilitate
standardised designs in low voltage assemblies.
Residual Current Device –
Series mRCM
Function
Residual current devices are switching devices
offering following purposes
Complete trip unit
family
Disconnecting a circuit from the mains
automatically if the total of currents flowing to
and from a circuit exceeds a defined value.
A full range of Digitrip® programmable and
electronic trip units has been expanded to offer
customers a choice of protection, information,
and communication capabilities to meet specific
requirements.
High withstand ratings
Magnum provides high interruption and
withstand ratings in a small physical size.
Through-the-door design. All controls, indicators,
and the trip unit are visible and can be safely
accessed without opening the compartment door.
Internal tripping independently of toggle
position ensures thatthe device trips even if the
toggle is blocked or held by the operator.
Connecting a circuit to the mains or disconnecting
it from the mains by manual operation.
38
39
Switch Disconnectors
(Isolator)
Contactors & Mini Contactors
Function
Function
Mini contactor relay DILE, contactor relays,
contactors up to 12 A AC-3 at 400 V
Load circuit breaker with isolating function
•Design according to IEC/EN 60947-3
•Highly wear resistant contacts
•Quick make, black toggle
•Terminal capacity 50 mm2
•Compatible busbars with switchgear series Xpole
by use of the mouth terminal in combination
with standard fork busbar
Residual Current Circuit
Breakers (RCBO)
Circuit Breakers With Integral Over current Protection
AC and DC contactor system DILM, contactor
relays, 3 pole contactors up to 170 A AC-3 at
400 V, 4 pole contactors up to 200 A AC-1
High rated contactors up to 1600 A AC-3 at 400
V, contactors up to 2600 A AC-1
Overload Relay
Function
Function
Protection against O/L, S/C and E/L in one unit.
Bimetal relay - overload relay up to 630 A
•Innovative High Quality ElectronicCombined
RCD & MCB In One Unit
•Line Voltage Dependent
•Solid Neutral
ZEB electronic overload relay - overload relay up
to 1500 A
ZEV electronic overload relay - overload relay up
to 820 A
EMT6 thermistor overload relay for machine
protection
40
41
Plug-In Relays
Lighting
Properties
Properties
•Current rating: 1A–30A
•Contact arrangement: SPDT, DPDT, 3PDT,
4PDT, etc.
•Coil voltage: 6V–240 Vac/ 6V–110 Vdc
•Mounting options: socket, flange, DIN rail,
panel
•Specifications: CSA, CE, IEC, NEMA, UL, etc.
•Other: Physical dimensions, maximum voltage,
mechanical/ electrical life, etc.
•All illuminated devices feature LED light units
rated to 100,000 hours
•Most components carry an IP67/69k rating,
suitable for high temperature, high-pressure
wash down environments
•Laser etched button-lenses and all other frontof-panel accessories can be shared with the M22
line
PushButtons
Timer Relays
Properties
Properties
The range of electronic time relays comprises
three different construction types, adapted for
the most widely varying applications. The time
relays are mounted on a DIN top-hat rail.
In accordance with IEC/EN 60947 and
VDE0660, the Pushbutton has a modular
structure suitable for different application
requirements. They can be mounted without
any need for tools. Contact blocks are finger
safe. Up to 6 contact blocks can be mounted on
each mounting location.
The measurement and monitoring relays monitor
fluids, currents, phases, resistances or voltages.
42
43
Motor Protective
Circuit Breaker
Soft Starter
System features
Essential features
Properties
PKE motor-protective circuit-breakers are based
on a modular design that consists of three basic
devices (PKE12, PKE32, PKE65) and a series
of plug-in trip blocks (PKE-XTU…) that cover
five current ranges going from 0.3 to 65 A.
• Plug-in trip blocks of up to 65 A make it possible
to quickly adjust the current range
The soft starter has become increasingly established
as an alternative to the star-delta starter. Already a
continuous spectrum for the drives up to 110 kW
is on offer with the DS4 and DS6 series. This is
now followed by the new DS7 series that combines
the benefits of the DS4 with the xStart system.
•Electronic wide-range overload protection
reduces the need for different models and makes
design, engineering, and stockkeeping simpler
The plug-in trip blocks can be comfortably
combined with the basic devices in order to put
together a PKE motor-protective circuit-breaker,
and do not require any tools for this purpose.
Motor start-up is soft but still at a higher torque
than other available solutions using a patented
method. Extended service intervals and reduced
operating costs are welcomed side effects.
Designed for normal applications such as pumps,
fans and small conveyors, the compact DS7 is
ideal. The DS7 will soon be available with a
SmartWire-DT connection to simplify wiring and
enhance functionality as an automation solution.
The DS7 is a fully integral element in this system;
all existing components can be used. The DS7
replaces the mechanical contactor and extends the
function “Motor soft start”.
This modular plug-in design makes it possible
to quickly change current ranges by simply
replacing the trip block while leaving the basic
device in place.
44
45
Variable Speed Drive
Power ranges
Features / Options
• 1~ 230 V / 3~ 230 V: 0,75 … 2,2 kW
• 3~ 230 V / 3~ 230 V: 0,75 … 75 kW
• 3~ 400 V / 3~ 400 V: 0,75 … 250 kW
• IP20, IP40, IP55, IP66
• RFI Filter as standard
• Brake chopper as standard
• STO (Safe Torque Off)
• OLED-Display as option
Control mode
Onboard I/O interface
(max. .. min.)
• V/f , SLV, CLV
• 150 % overload for 60 sec.
• 200 % overload for 4 sec.
Communication
• 5..3 Digital inputs
• 2..0 Digital output
• 2..0 Analog input (0…10 V / 0/4…20 mA)
• 2..0 Analog output (0…10 V / 0/4…20 mA)
• 2 Relay output
• Modbus RTU and CANopen onboard
• Fieldbus modules as option
46
Easy Programable Logic
Control (Easy PLC)
Flexible interfaces
User-friendly
operation
Whether CANopen or easyNet: The combined
CAN interface enables you to choose your own
network structure.
As the only compact PLC with both an integrated
and remote display, the easyControl allows
simple operation and visualization.
Updates simply easy
Expansion
via easy Link
The slot for a memory module makes program
or firmware updates child‘s play. The memory
module is also fully suitable for archiving data.
If more inputs/outputs are required, an expansion
can be fitted directly to the basic unit. Digital
and analog expansions are possible.
Ethernet on board
The Ethernet interface enables easyControl to be
integrated easily. This simplifies programming
and connections, such as visualization systems
via OPC.
47
Industrial PLC
HMI PLC
Whether in machine engineering, installations
or in single applications there is seldom an
application in which an HMI cannot simplify
operation and through that relieve the operator.
Function
Performance is not only processor power, which
is why the XP700 series offers more.
Modern touch displays provide clear, flexible
menu guidance in every wished for language
and allows the machine manufacturer world
wide sales of their machines with just one hardand software solution.
•High flexibility and maximum openness
•PCI slot for an option PCI module
•No rotating parts (1Ghz Processor)
•Robust infrared touch
From 3.5” to 15” touch display HMI-PLC you
have for every machine the optimal solution.
Control, positioning and communication are
developed with XSoft- CoDeSys-2 based on
IEC 61131-3. The visualisation comfortably
created with Galileo.
Remote I/O System
UPS
POWERWARE
AND MGE FAMILY UPS
Whether controlling motion, temperature
or speed measurement, current and tension
recording – the fields of usage for remote I/Os
are so wide ranging as are the different types of
applications. They are everywhere in usage where
decentral signal processing is the beginning and
end of the automation concept.
•AC UPS from 350 VA up to 4000 kVA
•DC systems of all sizes
•A broad portfolio of rack-based power
distribution
units
(ePDU®)
•Software and connectivity products for power
management and remote control
•Technical support and maintenance
•Complete power quality solutions
Eaton Automation offers for every application
the suiting I/O system. Whether fine granular
graded with XI/ON or compact with WINbloc –
naturally also in mix operation in on bus thread.
The result: a modular concept with easy to
use handling – adaptable to any application,
intelligent and future proof.
48
49
SmartWire-DT
Distribution Board xBoard
Type TPN
Properties
•Standard : IEC 61439
•Voltage Range : 3-Phase, rated voltage
240/415V,
50/60Hz
• Rated busbar capacity : 100A, 125A, 200A & 250A
•No. of TP (SP) ways: 4(12), 6(18), 8(24),
10(30), 12(36), 14(42) 16(48), 18(54), 20(60).
•Degree of protection: Indoor use IP41
•Enclosure thickness: 1.2mm
•Enclosure material: Epoxy powder coated sheet
steel enclosure
Secures your
know-how
SmartWire-DT significantly cuts your wiring
requirement and helps you save costs across
the entire value chain. From design through
construction, programming, commissioning to
extending your system.
Distribution Board xBoard
Type SPN
Properties
Utilizing Eaton’s industrial switchgear, SmartWireDT is based on tried-and-tested technology.
SmartWire-DT makes Eaton industrial switchgear
communications-capable.
•Sheet steel enclosure for single phase distribution
•Designed as per new standard : IEC 61439
•Flush and surface mounting design with IP40
protection
•Colour : As standard RAL 7035, other colours
available upon request
•Fitted with sheet steel removable flap door
•Available with or without busbar assembly
•Complete with earth and neutral bars
•Enclosure thickness : 1.2mm
You can use the SmartWire-DT technology flexibly.
The connection via standard fieldbus systems
(e.g. PROFIBUS, CANopen) allows use on the
controller platforms of many manufacturers.
Another option is the use of Eaton automation
components with an integrated SmartWire-DT
interface.
50
51
Wall-Mounted Panel
Type CS
Distribution Board
Type XVTL
Technical features
Technical features
Available in 45 sizes.
from 250x200x150 mm to 1200x1200x250 mm
The stable CS enclosures series made of solid
sheet steel is ideal wherever an effective protection
against direct contact with live parts is required.
The high degree of protection (IP66) not only
provides full protection against most adverse
environmental conditions, but also protects the
systems and equipment inside the enclosures
against their harmful consequences.
Tightness is guaranteed through a continuously
foamed polyurethane sealing. An all-around rainwater
drain profile prevents liquids (such as water or oil) and
dirt from penetrating when opening the door.
52
Shock resistance rating is IK09 according to
EN 62262, hence the inside equipment of the
enclosures is also protected against mechanical
impacts. CS enclosures can be installed as wallmounted enclosures. A rough-type paint applied
in the powder-coating method provides for nonabrasive corrosion protection.
The side-by-side mountable distribution board
XVTL is the newest member of the xBoard
family from Eaton Moeller. As a stand-alone
enclosure it is ideally suited for control and
energy distribution in the industrial and
fucntional buildings. The degrees of protection
IP40 and IP55 are available.
The door of the enclosure is easy to remove in
case any further mechanical work needs to be
carried out. Concealed inside hinges according
quick-change technology are easy to remove
for this purpose and provide for quick and easy
reversal of the hinging from left to right and
vice-versa.
The absolute highlight of the side-by-side
mountable distribution board is the vast number
of possible variants up to 2500 A unkown up
to now. With 55 enclosure dimensions available
- heights from 1400 to 2000 mm, widths from
425 to 1200 mm as well as depths from 300 to
800 mm - the right enclosure is available for
every application.
53
Wiring Devices
Explosion Proof Equipment
EX-CONTROL STATIONS
PREMERA white
moulded
EX-PENDANT LIGHT
FITTINGS
The PREMERA White Moulded range offers a
modern aesthetically edged styled appearance
whilst utilising the well established UREA
material with its inherent MRSA germ protection
properties ideal for kitchens, bedrooms and living
rooms. Each product is supplied with an optional
screw cap facility to hide unsightly screws.
EX-FLURESCENT LIGHT
FITTING
ELECTRICAL CONNECTIVITY
COPA fi x
The COPA style of plate has been extended
to offer an alternative to the ‘clip-on’ plate by
offering the same plate profi le with it’s stylish
good looks but with a fi xed plate, rather than just
a ‘clip-on’ option. COPA fi x offers a solution in
situations where it is more desirable to have screw
fi xed plates in applications such as schools and
public places.
Bus Duct
Properties
• All bus plugs are polarized to prevent improper
installation.
• Lightweight and compact design provides for
easy installation.
• Housing is combined with a true sandwich design
in both plug-in and feeder busway, contributing to
improved coordination and high short-circuit ratings.
• Epoxy insulation process ensures optimum
conductor and system protection.
• The compact design of corner joint allows for
layouts that provide optimum utilization of space
and can be installed in areas where traditional
90-degree elbows cannot.
• Only having one or two conductors per phase and
the Pow-R-Bridge joint design makes the voltage
drop much lower than that associated with cable,
allowing a more efficient use of energy.
PREMERA proof
PREMERA PROOF is a range of weatherproof
accessories offering IP66 protection for outdoor
or more arduous environments. The range
provides extensive combinations by utilising the
1 and 2 gang IP66 enclosures whilst delivering on
aesthetic appeal.
54
55
We look forward to
working with you.
56
Head Office
Commercial Al Estiklal Bldg,
Al Estiklal St, Basra 2663, Iraq
Mob. +964 771 593 3406
info@noor-tech.com
www.noor-tech.com
، ‫ الب�صرة‬،‫ العراق‬:‫املكتب الرئي�سي‬
‫ جممع اال�ستقالل التجاري‬،‫�شارع اال�ستقالل‬