Control Drawing Status Display Package

<<Contents>> <<Index>>
General
Specifications
Model VP6H4410
Control Drawing Status
Display Package
GS 33J05H50-01EN
[Release 6]
n
GENERAL
The GS covers the specifications of the VP6H4410 Control Drawing Status Display Package to visually check the
control process of a field control station (FCS) on the human interface station (HIS).
n
FUNCTION SPECIFICATIONS
The package displays the Control Drawing View. On the view is displayed drawing status (ex. data and alarm status)
created and edited by the FCS control drawing builder and status display builder. Users can visually check control
process status and related data.
n
OPERATING ENVIRONMENTS
Hardware Requirement
Conforms to operating environment of VP6H1100 Standard Operation and Monitoring Function
Software Requirement
Conforms to operating environment of VP6H1100 Standard Operation and Monitoring Function.
Necessary Software: VP6H1100 Standard Operation and Monitoring Function
n
MODEL AND SUFFIX CODES
Description
Model
Suffix
Codes
VP6H4410
Control Drawing Status Display Package
-V
Software license
-E
For Expansion
1
Always 1
1
English version
N01
For Small/Middle Scale Project
N03
For Large Scale Project
N13
For Project Scale Expansion
Note : When ordering this license newly, be sure to select ‘-V’, and ‘N01’ or ‘N03’ as a project scale in the suffix codes.
Note : When expanding the project scale, select ‘-E’ and ‘N13’ in the suffix codes.
n
ORDERING INFORMATION
Specify model and suffix codes.
n
TRADEMARK
•CENTUM is a registered trademark of Yokogawa Electric Corporation.
•Other company and product names appearing in this document are trademarks or registered trademarks of their
respective holders..
Yokogawa Electric Corporation
2-9-32, Nakacho, Musashino-shi, Tokyo, 180-8750 Japan
Tel.: 81-422-52-5634 Fax.: 81-422-52-9802
Subject to change without notice.
GS 33J05H50-01EN
©Copyright Feb. 2015 (YK)
2nd Edition Mar. 17, 2015 (YK)