Tricoat III Finishair - Département Chimie IUT Besançon 25

Sponsored by
This is the fourth edition of this congress, about wet processes, dry processes or polymeric coatings for industries. Since 2009,
TRICOAT has gathered the FINISHAIR community, dedicated to surface treatments problematic around aeronautic sector.
This Congress is intended to a large public such as professionals of surface treatments, orders issuers, professors, researchers,
students preparing a vocational bachelor’s degree specializing in surface treatments, including environmental management, master of
formulation and surface treatments, who can benefit from all the opportunities offered to those concerned by industrial applications
sectors.
This manifestation is meant to meet regional, national and cross border needs in this profession. And its main objective is to be widely
open to international needs.
2015 NOVELTIES
For this fourth meeting edition, it will be a great pleasure to welcome you for 2 days and to propose 21 conferences.
The setting will be the same as 2013 (Kursaal Center : nice building of Bisontin style, located in the center of Besancon (Theater Place,
2) with a large amphitheater, annex rooms and great show room Kursaal, well-equipped for exhibitions and lunch.
PREVISIONAL PROGRAM
3 thematics will be approached and the full estimated programme is given in the following pages.
Wednesday May, 6: (9.30 A.M. – 6.00 P.M.): Regulations, Anti-corrosive protections, Suppliers novelties.
Thursday May, 7:
(9.00 A.M. – 4.00 P.M.): Emergent Technics, Aeronautic surface treatments processes.
REGISTRATION
Registration form to TRICOAT IV – FINISHAIR link to return by April 17, 2015
ACCOMODATIONS
A university agreement with partner hotel allows us to suggest you a residence hotel package for 5th and 6th May nights and the
following for those who would take advantage of Besançon city and its attractions from 8th to 10th May nights. The “Zenitude Hotel – the
City” is located 15 minutes by bus or by tramway from the railway station “Besançon Viotte”, 10 minutes’ walk to the centre, and 15
minutes to Kursaal Center.
Room Prices range from about 61 € to 65 € for 1 or 2 persons.
Some rooms are dedicated to congress TRICOAT. Please precise it when booking.
Other hotels are also available in the centre near Theater street. You will find information on our website.
PUBLIC TRANSPORT IN BESANCON
Bus and tramway Ginko serve quickly the Besancon railway station Viotte, hotels and centre (Bus every 10 minutes). Stop
at« Granvelle » bus stop for Kursaal Center.
CARS OR TRAINS ACCESS


By Cars, exit highway A36 "Besançon Centre", follow the direction of Lons, leave the turnpike to exit N°55 in direction of the
centre, large car parks are close to Kursaal, about 500 m: “Parking de la mairie” and a small car park « short stay » in front of the
Kursaal, 1 place du théâtre and Grandvelle park. Please click here to know more about car park information.
By train, two railways TGV stations stop at Besançon city (caution : take a ticket to Besançon Viotte railway station because
besançon Franche-Comte TGV railways station is 12 km away from Besançon centre. Many railways shuttles provide the transfers
between the two railways stations.
CONTACT
Email: tricoat@univ-fcomte.fr
Phone: +33 (0)381.666.894
Web site: http://chimie.iut-bv.univ-fcomte.fr
Postal address: IUT Département Chimie - TRICOAT, 30 avenue de l’Observatoire, BP 1559, 25009 Besançon
Sponsored by
Estimated Program on 2 days
Chairman: Michel RUIMI – European Expert Engineer (FINISHAIR)
Honour guest: Henri Dubois
President of Dubois laboratories (La Chaux-de-Fonds, Switzerland)
May Wenesday 6 2015
9H30 - 10H00 - Welcoming of participants
10H00 - 10H30 - Opening introductions
10H30 - 10H55 conférence 1
« Statements of French suppliers in surface treatments »
Denis THERY, Industries of surface technologies union (UITS), Paris (92) – General delegate
10H55 - 11H20 conférence 2
« The evolution of European REACH regulation »
Samira ABDESSLAM, CETIM, Industrial performance pole, Senlis (60) – Engineer
11H20 - 11H45 conférence 3
« Surface treatments at Radiall Company »
Émilie LAKHDAR, Radiall Company, Voreppe (38) – Method service manager
Franck EYRAUD, Radiall Company, Voreppe (38) – Surface treatment manager
11H45 - 12H10 conférence 4
« Evolution of analytical techniques in surface treatments »
Mirko KIPFER: Laboratory Dubois SA, La Chaux-de-Fonds (Switzerland) – Chemist Engineer, responsible of chemistry department of
leathers and polymeric materials.
12H10 - 12H35 conférence 5
« Senzitation by hydrogenium embrittlement to high mechanical resistance steels of fracture: From conception to surface
treatments by wet process »
Alexandre FLEURENTIN, Metallo Corner Company, Paris (75) – Metallurgist expert Engineer
Michel RUIMI, Finishair, Paris (75) – Surface treatments European Expert Engineer
12H35 - 14H00 - Lunch Time
14H00 - 14H25 conférence 6
« Anti corrosion protection of mechanical automotive vehicles parts »
Jean-Michel BORDES, PSA Technical center Belchamp (25) – Corrosion Specialist Engineer
14H25 - 14H50 conférence 7
« A new method to maintain defined qualities of Zinc-Nickel high performance process coating »
Patricia PREIKSCHAT, Surtec International GMBH, Bensheim (Germany) – Global Product Management ELP Tech. Coordination
14H50 - 15H15 conférence 8
« Zn-Fe coating potential substitute of Zn-Ni coating »
Jean-Yves HIHN, UTINAM, UMR 6213, University of Franche-Comté, Besancon (25) – Professor, Director Deputy of UTINAM
15H15 - 15H40 conférence 9
« Potentiality of Sn-Zn coating as alternate solutions of cadmium coatings »
Jérôme HALUT, Protection des Metaux Company, Noisy-le-Sec (93) – President
15H40 - 16H15 - Break and visit of exhibition stands
16H15 - 16H40 conférence 10
« Chromium VI substitution in plastic metallization »
Olivier GUIBORAT, Atotech France, Saint-Ouen-l'Aumône (95) –Plating on Plastics Manager products
16H40 - 17H05 conférence 11
« Innovative high corrosion resistant systems for chrome plating on plastics »
Nicolas POMMIER, Coventya SAS, Villeneuve la Garenne (92) – France technical Manager
17H05 - 17H30 conférence 12
« Improvement of chemical catalytic nickel coating for aeronautic applications »
Bruno ROY, Enthone France Company, Marne- la-Vallée (77) – Technical Manager WRC (Wear Resistance Coating)
17H30 - 18H00 - Stand visit
19H00 :
Kursaal EVENING festivities
Cocktail offered by Micronics Systems Company
After Festivities diner
Thursday May 7 mai 2015
9H00 - 9H15 – Welcoming of participants
9H15 - 9H40
conférence 13
« European investigations: Tendency of new coatings in surface treatments »
Jean-Marc BELOT, CETIM, Strategy and technology alert department, Senlis (60) – UTC Engineer
9H40 - 10H05 conférence 14
« Electro polishing process simulation and improvement »
Leonel FERREIRA: European research nuclear Center (CERN), Geneva (Switzerland) –Chemist Engineer – Technical Support
Department.
10H05 - 10H30 conférence 15
« Potentiality of pulsed currents in connector industry »
Damien COMTE, FCI Electronics, Besancon (25) – Global Plating Engineering Manager
10H30 - 11H20 – Break and visit of exhibition stands
11H20 - 11H45 conférence 16
« Cleaning and preparing processes of aeronautic turbo engine parts - type CFM for MRO »
Steve DESCHRYJVER, Snecma Service Brussels, Safran Group, Zaventem (Belgium) – Technical Support Manager Surface
treatment
11H45 - 12H10 conférence 17
« AFULUB: an innovative solution for material forming process »
Fabrice LALLEMAND, UTINAM, UMR CNRS 6213, University of Franche-Comté, Besancon (25) – Professor, Deputy President UFC
12H10 - 12H35 conférence 18
« Deformability Improvement of sulfamate nickel coatings by ultrasonic method »
Christophe BRISMALEIN, Nexans Company, Lens (62) – Team Plating Leader
12H35 - 14H00 - Lunch Time
14H00 - 14H25 conférence 19
« Protection by painting process on aeronautic composite materials »
Jérôme MANCY, Akzonobel Aerospace Coatings Company, Blagnac (31) – Global Key Account Manager
14H25 - 14H50 conférence 20
« Artistic approach of thermal spray process to perform several coatings: The promises of cold spray process for aeronautic
sector »
Michel JEANDIN, MINES Paris Tech, Competence Center for spray Processing (C2P), Evry (91) – Research Manager
14H50 - 15H15 conférence 21
« The brush plating coating applied to aeronautic sector »
Nicolas HURAULT, Dalic Company, Vitré (35) – Sales Director
Serge LALLENEC, SNECMA, Safran Group, Villaroche (77) – Special Processes Quality Auditor
15H15 - 15H30 CONGRES SYNTHESIS
« Congress Conclusions and Synthesis »
Jean-Yves HIHN, UTINAM, UMR CNRS, University of Franche-Comté, Besancon (25) – Professor, Deputy Manager of UTINAM
15H30 - 16H00 – Break and Return to railway stations
CONTACT
Email: tricoat@univ-fcomte.fr
Phone: +33 (0)381.666.894
Web site: http://chimie.iut-bv.univ-fcomte.fr
IUT Département Chimie - TRICOAT, 30 avenue de l’Observatoire, BP 1559, 25009 Besançon
Our sponsors
(March 9 2015)
Exhibitors
(March 9 2015)
Our institutional partners