File - production

CATALOGUE 2016
ProducTion PrivEe is a small french-owned company based in Andorra,
specializing in hardtail frames and full range of cockpit and components. Production Privée is
born from the meeting of two friends who have been working for several years in the MTB
industry.
We are pleased to have Cedric Gracia among our ranks as he has been riding a Production
Privée cockpit since the beginning of our company in 2011, and still does to this date. In
addition, we worked together to develop the Mini CG pushbike, as well as our bars and stems
range with each part being tested and validated by him before its release. CG's
experience is very valuable and allows us to fully optimize each detail of our products.
Production Privée‘s state of mind is all about innovation with a new approach to the product.
Whether it be a functional or aesthetic point of view, nothing is left to chance. Materials,
manufacturing processes, supplier selection, we choose what is most effective in each area
without compromise. The product is at the center of our attention and is considered as a whole.
We design and develop every single product in house, in Andorra.
Have a good ride. The PP crew.
FRAMES
Our frames are one of the most high-end and efficient cromoly
frames that can be found on the market.
SHAN
Enduro frame, for 160mm travel fork.
Designed without any compromise, this is
THE trail weapon for those living in mountain
area.
OKA
Trail frame, for 140 to 120 mm travel fork .
Lighter and with even better pedaling
efficiency, this frame is perfect for those
riding in hilly areas.
Ktp flex
As for the rest of our products, we did not
want to compromise on anything for the
conception of our frames. Every idea we
thought to be good was applied, even if it
was complicated or expensive.
So we developed the KTP flex
system, which allows more grip, more
comfort and more efficiency in down hill
sections!
To achieve the optimum vertical flexibility of our frame rear end:
-  We use high-end cromoly tubes.
-  We use specific bladed tubes for the chainstays and the seatstays
-  We do not use bridge between chainstays
-  The seatstays are not heat treated to allow a maximum flexibility.
Specifications
SHAN
SPECIFICA
Use: All Mountain, Enduro, Marathon DH
Fork: from 160mm to 150mm travel
Wheel size: 650B (can be built with 26" wheels
with our specific conversion kit)
Weight: 2600g in medium size
Seat post: 30.9mm
Seat clamp: 34.9mm
Front derailleur compatibility: 34.9mm clamp
diameter / top swing top pull
Headtube: Tapered, integrated campagnolo
45x45, SHIS: IS42/IS52
Bottom Bracket : BB92 Press Fit standard Rear hangers: removable, frame comes
with12x142mm, more options available
OKA
Use: Trail / All Mountain
Fork: from 140 to 120mm travel
Wheel size: 650B (can be built with 26"
wheels with our specific conversion kit)
Weight: 2490g in medium size
Seat post: 30.9mm
Seat clamp: 32.8mm OKA specific
Front derailleur compatibility: direct
mount ONLY, top pull
Headtube: Tapered, integrated campagnolo
45x45, SHIS: IS42/IS52
Bottom Bracket: BB92 Press Fit standard Rear hangers: removable, frame comes
with12x142mm, more options available
Material: Cromo DB 4130 Japan seamless / Heat Treatment : All the tubes except seatstays
ISCG: ISCG 05 / Finish: ED treatment before painting
Artwork: Two tones painting / Sizes: S, M, L & XL
geometry
OKA
With 510mm-high fork, 120 mm travel:
Head tube angle: 67º
Seat tube angle: 73,5º
BB height: -42
Chain stay lenght: 428 mm
Seat tube height, S-M-L-XL : 400, 430, 470 and 510 mm
Horizontal top tube lenght, S-M-L-XL : 570, 590, 610
and 640 mm
Head tube height: S-M-L-XL: 105, 105, 110 and 115 mm
SHAN
With 554mm-high fork, 160 mm travel
Head tube angle: 65,5º
Seat tube angle: 72,5º
BB height: -35
Chain stay lenght: 428 mm
Seat tube height, S-M-L-XL: 400, 430, 470 and 510 mm
Horizontal top tube lenght, S-M-L-XL: 560, 580, 600 and 635 mm
Head tube height: S-M-L-XL: 105, 105, 110 and 115 mm
With 530mm-high fork, 140 mm travel:
Head tube angle: 66º
Seat tube angle: 72,6º
BB height: -35
Chain stay lenght: 428mm
Seat tube height, S-M-L-XL: 400, 430, 470 and 510mm
Horizontal top tube lenght, S-M-L-XL: 570, 590, 610 and
640mm
Head tube height: S-M-L-XL: 105, 105, 110 and 115 mm
SHAN 27
Classic Shan, Grey and black
Sober and classy, this colour
combination never gets old !
Recommended Retail Price:
Frame : 599€ with 12x142mm
hangers.
Frame KIT: 659€ with 12x142mm
hangers, PP rear axle and headset.
classic
SHAN 27 917
The paint scheme in inspired from the famous
Porsche 917 of Steve McQueen in the movie “Le
Mans”.
- Very special edition, production limited at
500pcs world wide, all numbered.
- Comes with stickers to customize the frame
- Can be sold with Spank Oozy Trail 295
custom orange wheelset.
Recommended Retail Price:
Frame : 639€ with 12x142mm hangers.
Frame KIT: 699€ with 12x142mm hangers,
PP rear axle and headset.
ltd edition
SHAN 27 917
ltd edition
SHAN 27
Limited edition inspired from our first
27,5" frame: The SHAN 27 Diamond, but
with reversed color scheme.
Can be paired with DVO Diamond Fork for
a perfect match!
Recommended Retail Price:
Frame : 599€ with 12x142mm
hangers.
Frame KIT: 659€ with 12x142mm
hangers, PP rear axle and headset.
Diamond Reverse
SHAN 27
diamond reverse
OKA classic
For 140 to 120mm front travel fork,
a bit lighter than the SHAN, with a
T/T 10mm longer and a S/T angle 1º
straighter to increase its versatility,
the OKA is our trail weapon for All
mountain.
Recommended Retail Price:
Frame : 599€ with 12x142mm
hangers.
Frame KIT: 659€ with
12x142mm hangers, PP rear axle
and headset.
OKA yellow ltd. ed
For 140 to 120mm front travel fork,
a bit lighter than the SHAN, with a
T/T 10mm longer and a S/T angle 1º
straighter to increase its versatility,
the OKA is our trail weapon for All
mountain.
Recommended Retail Price:
Frame : 599€ with 12x142mm
hangers.
Frame KIT: 659€ with
12x142mm hangers, PP rear axle
and headset.
OKA yellow ltd. ed
PP cockpit
Our stems and bars were designed to
work together in terms of mechanical
performance, but also in terms of design
and settings features.
One of the key assets of our cockpits is
how easy it is to adjust the handlebar in
the stem: you just have to align the two
stripes of the handlebar with the stripes of
the stem, and the handlebar is perfectly
centered.
The angle landmark on the stem and the
marks on the handlebar allow to adjust the
angle in order to optimize the riding
position.
Recommended Retail price: 145 €
Lg Bar
740 – 780 - 810
Material: alloy 7075 T6 DB
Rise: 0,5’’ /1’’ /1,25’’
Up sweep: 5º
Back sweep: 8º (7º for LGMH 810)
Bar bore : 31,8mm
Finish: Polish black anodized
One feature of our handlebars is the
landmark to set the spacing and angle of
the brake levers. Made by laser engraving,
it allows a quick and precise adjustment of
the cockpit !
On each side of the handlebars, the marks
allow to cut precisely to the desired width!
The central area is sand blasted to
maximize adhesion between the handlebar
and stem.
LgB
780 & 740 SL
Rise: 1’’ (25,4 mm)
Weight: 320 g for 780 mm
290 g for 740 mm super light!
Recommended Retail price : 65 €
The LGB 780 is our best seller, perfect for DH and Enduro
The 740 mm version is the best for All Mountain and Trail practice
LgTB
780
Rise: 0,5’’ (12,7 mm)
Weight: 320 g for 780 mm
Recommended Retail Price : 65 €
Our low-riser bar, perfect for downhill and enduro use
LgMH
810
Rise: 1,25’’ (31,8 mm)
Weight: 349 g for 810 mm
Recommended Retail price: 69 €
Our widest handlebar, ideal for Downhill Racing.
R2R STEM - STEALTH EDITION
R2R
STEALTH
Exists in 2 sizes:
This is the stem ridden by CG. With
curves inspired by the Corvette Stingray,
the R2R is Production Privée’s stem
designed for Enduro. Its matte black finish
is super resistant and guarantees to keep
the R2R like new for many seasons! The material is forged before being CNC
machined, granting our product an
amazing strength for an Enduro stem.
Length : 50 mm or 65 mm
Height : 36 mm
Pivot : 1’’ 1/8
Material : Alloy 7075 T6
Weight : 159 g
Finish : matte black with laser engraving
Recommended Retail price : 89 €
65 mm
50 mm
Mini cg
pushbikes
Balance bike designed as a true MTB !
For kids from 2 to 5 years old,
minimum height 89 cm
MINI Cg
Designed with Cedric Gracia, the Mini CG
is the ideal balance bike to learn riding.
The foot rest allows the kid to learn and
enjoy balance easily.
Hand grips are of different colours to help
differentiate left and right.
The wheels are real ones, with real tires
The rear hub and the frame are ready to
install a disc brake if your kid is a little
daredavil!
Nice frame and saddle artwork, laser
etched cockpit, bottle opener integrated in
the frame.
Next availability in May 2016, with a
new colour to be revealed soon!
Recommended Retail price: 169 €
ACCESSORIES
PP Bottom bracket Pressfit 92
Recommended Retail price: 59 €
Compatible with Raceface and Shimano
PP headset
IS42-IS52 integrated headset
Recommended Retail price: 55 €
Rear axle, 12 mm diameter
Available in 2 lengths: 135 mm and 142 mm
Recommended Retail price: 39,90 €
HANgERS
Our 27,5’’ Shan and Oka frames come with fitted 142x12 mm
hangers, but in addition to the typical replacement right hanger, we do
offer a selection of optionnal hangers.
Hangers Kit 27,5” 135x10 mm
To switch the orignial 142x12 mm hangers
delivered with our frame to 135x10 mm.
135x10 mm hangers offer more grip and comfort,
completing nicely the work of our KTP flex system.
Recommended Retail price for the kit : 49,90 €
Replacement right hanger available separately if
needed (see our pricelist)
Conversion kit 27,5” to 26”
Allows to ride a Shan 27 or Oka with 26’’ wheels
Includes an adaptor IS/PM for 180 rotor disc
Exists in 142x12 mm (kit retail price 64,90 €)
Or in 135x10 mm (kit retail price 59,90 € )
Replacement right hanger available separately if
needed (see our pricelist)
PP
BusHINgS
Even if we produce hardtail frames, here
at PP we have been thinking about those
riding full suspension bikes. This is why we
have developed offset bushings, an easy
way to tune the geometry of a full
suspension bike by shortening the eye-toeye length of the shock.
This result in a slacker head tube angle
and a lower BB. Our offset reducers are
designed to shorten the length of the
shock of 3mm. Depending on the
suspension design BB can be lowered
from 5 to 10mm and the head angle from
−0,5º to −1º.
PP
BusHINgS
Dimensions: 22x6mm, 22x8 mm,
40x8 mm
Head tube angle: -0,5º to -1º
BB height: -5 to -10mm
Material: alloy 7075 T6 full CNC
Compatibility: Fox, Manitou and Rock
shox
Finish : Black anodized
Artwork: laser engraved
Recommended Retail price : see
price list
Also available: special kits for Santa
Cruz bikes (22x8 mm – 2 pcs) or for
Lapierre bikes (19x6 mm – 25x6 mm)
FOR THOSE IN THE KNOW
Av. del Traves 28, Edifici Sant Roc local 2, AD400 La Massana – Andorra – Tel: +376 840 007 – sales@production-privee.com