- Design for Asia Awards

Design for Asia Awards 2015 - Checklist for Materials Arrangement
MATERIALS REQUIREMENT FOR ENTRIES (FOR 18 CATEGORIES)
Material
Definition
Requirement
Actual
Produced product in (i) At least one piece of actual product.
Product
2-dimension, 3(ii) For Product and Industrial design, the submitted entry must be
dimension and
completely assembled and fully functioned. Any electrical
other media etc.
products must provide transformer and adaptor to match Hong
Kong electrical voltage: 220 volts AC, 50HZ.
(iii) For other media from internet, the interactive / digital media and
mobile applications submitted should allow to be downloaded from
the web platform for trial run (free of charge) by HKDC.
(iv) For Environmental design, maximum ten (10) images can be
uploaded to the online submission system.
Oversize
Product
Dimension over 1m
x 1m x 1m
Supporting Relevant materials
Materials
that demonstrate
(Optional) and elaborate the
actual product
(v) Contact Design for Asia Awards Secretariat before arranging
delivery. HKDC reserves the right if received the oversized product.
(vi) Demonstration/Promotional video(s)
Format: MP4 only
(vii) Press release and news clippings etc. can be printed in colour, 2sided on A4 size and bound format.
(viii)If you would like to provide the materials by e-format, please email
the Secretariat at enquiry@dfaaward.com
SUBMISSION DEADLINE
For early bird application: 15 May 2015, 5:00pm (HKT)
For regular application: 30 June 2015, 5:00pm (HKT)
CORRESPONDENCE ADDRESS
Design for Asia Awards Secretariat
Hong Kong Design Centre,
Room 100, 1/F InnoCentre, 72 Tat Chee Avenue, Kowloon Tong, Hong Kong
Attention: Ms. Cathy Lau
Tel: +852 3793 8450
ENQUIRIES
Tel | +852 2522 8688 / 3793 8450 / 3793 8446
Email | enquiry@dfaaward.com
NOTES
1. All materials (except supporting materials) must be in English.
2. Entry label (can be downloaded from the online submission system upon payment settled) must be fixed on the
top right-hand corner of the packaging of each submitted item (including supporting materials). HKDC shall
NOT receive any submitted items with improper labeling.
3. The Entrant shall be responsible for all costs (including but not limited to all packaging costs, transport costs,
documentation, postal charges, courier charges, insurance costs, governmental/jurisdictional approvals and
licenses and any other costs necessary or likely) of passing and transporting of the Entrant's Design into the
possession of HKDC and the return of the Entrant's Design upon the Entrant's request.
4. HKDC shall not be responsible for any loss or damage of the submitted entries due to delivery issue.
5. Posters, display boards, CD-Roms, perishables and beverage items are not returnable.
6. Late submission shall NOT be allowed, while the entry fee will NOT be refunded.