MS_PDS - MS Ramaiah University of Applied Sciences
Transcription
MS_PDS - MS Ramaiah University of Applied Sciences
Module Specifications MDS Programme Course: Periodontology Department: Periodontology Faculty of Dental Sciences M. S. Ramaiah University of Applied Sciences University House, New BEL Road, MSR Nagar, Bangalore – 560 054 www.msruas.ac.in MSRUAS MDS – PGPERI01 Specifications - 2015 Module Specifications: Module Title Preclinical Phase Module Code PGPERI01 Department Periodontology Faculty Dental Sciences I. 1. Module Summary Aim and Summary This module aims to train the students to understand the development of periodontal anatomy and disease. The students are trained to elicit clinical history, examine intra oral structures while recording different indices for periodontal diseases. The students will be able to interpret appropriate diagnostic procedures and formulate an effective treatment plan. The students will be able to categorize instruments to perform basic periodontal procedures. 2. Module Size and Credits: Number of credits 24 Total hours of class room interaction during the Module 120 Number of tutorial hours -- Number of clinical hours 480 Number of weeks 22 weeks. Department responsible Periodontology Module marks Total Marks :120 Component 1 (CEM):120 marks Continuous evaluation in Theory : 20 marks Assessment in Theory : 20 marks Continuous evaluation in Practicals : 20 marks Viva voce : 20 marks Assignment : 40 marks Pass requirement A minimum of 40% marks in component 1 Attendance requirement 85% attendance is mandatory to be eligible for assessment. Page 1 of 6 MSRUAS II. MDS – PGPERI01 Specifications - 2015 Teaching , Learning and Assessment 1. Intended Module Learning Outcomes (ILO) After undergoing this Module, the student will be able to 1. Describe the clinical signs and symptoms of periodontal diseases applying basic anatomy and pathology. 2. Formulate diagnosis using clinical, laboratory and radiological findings through empathetic patient assessment for gingival diseases. 3. Record different indices for location, extent and severity of periodontal diseases. 4. Develop an effective treatment plan for gingival diseases 5. Categorize instruments to perform basic periodontal procedures 6. Demonstrate hand scaling skills on the study model. 2. Module Contents Theory Applied Anatomy -Development of Periodontium, Temporomandibular joint, Maxillae and Mandible, Nerves of Periodontium, Tongue, oropharynx, Muscles of mastication Physiology of Head and Neck-Blood, Respiratory system, Cardiovascular system ,Blood pressure, Normal ECG, Shock, Endocrinology – hormonal influences on Periodontium, Gastrointestinal system, Salivary secretion – composition, function & regulation, Reproductive physiology, Hormones – Actions and Regulations, role in periodontal disease, Nervous system, Pain pathways, Taste – Taste buds, primary taste sensation & pathways for sensation Basics of Microbiology and General Pathology- General bacteriology-Identification of bacteria ,Culture media and methods, Sterilization and disinfection, Immunology and Infection, Systemic bacteriology with special emphasis on oral microbiology – staphylococci, genus actinomyces and other filamentous bacteria and Aggregatibacter actinomycetumcomitans,Virology- General properties of viruses, Herpes, Hepatitis, virus, HIV virus, Mycology, Candidasis, Applied microbiology, Diagnostic microbiology and immunology, hospital infections and management , Descriptive Knowledge of Drugs and Applied Pharmacotherapeutics, Classification and Epidemiology of Periodontal Disease. Cell structure and metabolism, Inflammation and repair, necrosis and degeneration, Immunity and hypersensitivity, blood, Circulatory disturbances – edema, hemorrhage, shock, thrombosis, embolism, infarction and hypertension ,Disturbances of nutrition, Diabetes mellitus, Cellular growth and differentiation, regulation, Lab investigations Anatomy of Normal Periodontium- Micro and Macro structural anatomy and biology of the periodontal tissues, Blood supply of the Periodontium, Lymphatic system of the Periodontium ,Nerves of the Periodontium ,Age changes in the periodontal tissues, Periodontal Diagnosis- History, examination, diagnosis, prognosis and treatment planning-Clinical diagnosis, Radiographic and other aids in the diagnosis of periodontal diseases, Advanced diagnostic techniques, Risk assessment, Determination of prognosis, Treatment plan, Rationale for periodontal treatment, General principles of anti-infective therapy with special emphasis on infection control in periodontal practice, Halitosis and its treatment, Bruxism and its treatment Page 2 of 6 MSRUAS MDS – PGPERI01 Specifications - 2015 Basics of Treatment Aspects including Scaling and Root Planing- Instrumentation, Principles of periodontal instrumentation, Instruments used in different parts of the mouth Preclinical Work 1. 2. 3. 4. 3. Performance of various grasp and rests and instrumentation of scaling on the cast : 5 Preparation of Splints on the cast : 6 Interpretation of radiographs for comprehensive management:20 cases Application of periodontal Indices for assessment : 22 cases Module Teaching and Learning Methods Teaching and Learning Methods Duration in Hours Face to Face Lectures 15 Seminars, Journal clubs, IDM 105 120 Demonstrations 1. Demonstration using Videos 20 2. Demonstration using Physical Models/Systems 20 3. Demonstration on a Computer Clinical Work 1. Pre Clinical area 120 2. Clinical Area 180 3. Hospital Setup 4. Field work/dental camp 10 5. Outreach centres 20 480 Others 1. Case Study Presentation 2. Guest Lecture 10 3. Industry/Field Visit 4. Brain Storming Sessions 20 5. Group Discussions 80 6. Discussing Possible Innovations Term Tests, Laboratory Examination/Written Examination, Presentations 40 Total Duration in Hours 640 Page 3 of 6 MSRUAS 4. MDS – PGPERI01 Specifications - 2015 Method of Assessment This module will be assessed for a weightage of 120 marks; assessment in theory : 40 marks , in practicals/clinical : 40 marks and an assignment for 40 marks a. Component 1A will be as assessment in theory for 20 marks conducted at the end of term while 20 marks will be assigned for seminars, journal clubs, IDM or any other such academic activity. b. Component 1B will be assessments in regular chair side discussions of practicals/clinical for 20 marks and viva voce marks for 20 marks. c. Component 1C will be an assignment that will be submitted as a word document The assessment questions are set to test the learning outcomes. In each component certain learning outcomes are assessed. The following table illustrates the focus of learning outcome in each component assessed: Intended Learning Outcome 1 2 3 4 5 6 Component-1 Theory A X X Practical B X Assignment C X X X X X Component 1 will be moderated by a second examiner. 5. Reassessment 1. A student having met attendance requirement and happens to fail in component-1 will be asked to resit for assessment in theory and viva voce. 2. A student who fails in component 1 inspite of Resit examination is required to reregister for the module in the next offered term and complete component 1. 3. The maximum number of such opportunities are limited and as per the academic regulations governing this course. 6. Achieving Learning Outcomes The following skills are directly or indirectly imparted to the students in the following teaching and learning methods: Curriculum and Capabilities S.No How imparted during the Module Skills 1. Knowledge Seminars, Journal clubs 2. Understanding Seminars, Journal clubs 3. Critical Skills Class room lectures, Seminars, Journal clubs 4. Analytical Skills Class room lectures and tutorials 5. Problem Solving Skills Clinical posting 6. Practical Skills Clinical posting 7. Group Work Assignment, Clinical posting Page 4 of 6 MSRUAS III MDS – PGPERI01 Specifications - 2015 8. Self Learning Assignment, Clinical posting, Tutorials 9. Written Communication Skills Assignment, 10. Verbal Communication Skills Clinical posting 11. Presentation Skills Clinical posting, Seminars, Journal clubs and IDM 12. Behavioural Skills Clinical posting 13. Information Management Assignment, Tutorial, Seminars, Journal clubs 14. Personal Management Clinical posting 15. Leadership Skills Group discussion Module Resources ESSENTIAL READING 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. B.D.Chaurasia's (2010) Human Anatomy, volume 3, 6th edition CBS publishers Newmann, Carranza's (2011) Clinical Periodontology, 10th edition Elsevier Guyton & Hall (2010) Text book of Medical Physiology – 12th edition Elsevier Ganong’s (2012) review of Medical Physiology , 23rd edition New York publisher Ananthanarayanan and Paniker (2005), Textbook Of Microbiology 7th Edition Blackswan5 Jan Lindhe(2008) Clinical Periodontology and Implant Dentistry -, 5th Edition Berkovitz(2009) Oral Anatomy Histology and Embryology 4th Edition Mosby, Elsevier Shafer’s (2009) Textbook Of Oral Pathology,6th edition Elsevier Cohen E (2006) Atlas of Cosmetic and Reconstructive Periodontal Surgery 3rd edition Hamilton RECOMMENDED READING 1. JK Avery (2006) Essentials of Oral Histology and Embryology: A Clinical Approach – 4th edition. Elsevier 2. Robert I. Handin (2005) Blood: Principles and Practice of Hematology - 2nd edition Wilkins and Wilsons 3. Richard S. Weiner (2001) Pain Management: A Practical Guide for Clinicians, 6th Edition Boswell publication 4. Colin A. Pinnock (2009) Fundamentals of Anaesthesia, 3rd edition Cambridge university press 5. Drake Gray’s(2010) Anatomy for students 2nd edition Elsevier MAGAZINES AND JOURNALS 1. 2. 3. 4. 5. 6. 7. Journal Of Periodontology Journal Of Clinical Periodontology Journal Of Periodontal Research International Journal Of Periodontics s and Restorative Dentistry. Critical Care Pharmacotherapeutics Applied Health Economics and Health Policy (2014): 1-14. Perio 2000 Page 5 of 6 MSRUAS MDS – PGPERI01 Specifications - 2015 8. Journal of Biomechanics WEBSITES 1. 2. 3. 4. 5. IV. silversword.files.wordpress.com/.../blood-and-nerve-supply-to-the-perio... www.dental.pitt.edu/informatics/periohistology/en/gu0211.htm www.endoexperience.com/.../2011-contemporarydiagnosisperio.pdf www1.umn.edu/perio/dds6111/Risk_&_Prognosis_SS12.pdf www1.umn.edu/perio/dds6111/Treatment_Plan_SS12.pdf Module Organization Module Code PGPERI01 Module Title Preclinical phase Module Teacher/s Name Dr Mahantesh Module Teacher Contact Details Phone: E-mail: 9844611562 mahantesha.pd.ds@msruas.ac.in Module Specifications Approval Date Next Module Specifications Review Date: Page 6 of 6 MSRUAS MDS – PGPERI02 Specifications-2015 Module Specifications: Module Title Clinical Phase Basics – 1 Module Code PGPERI02 Department Periodontology Faculty Dental Sciences I. 1. Module Summary Aim and Summary This Module enables the student to understand etiopathogenesis and treat periodontal disease with emphasis on the preventive aspects. The student will be able to meticulously record patient clinical data and draw inferences. The student will also provide non surgical treatment for medically compromised patients. The student will be able to perform splinting, coronoplasty procedures, scaling, root planning procedures on the patients. The student will be able to educate and motivate the patient for various preventive oral hygiene measures and procedures. 2. Module Size and Credits: Number of credits 24 Total hours of class room interaction during the Module 120 Number of tutorial hours -- Number of clinical hours 480 Number of weeks 22 weeks. Department responsible Periodontology Module marks Total Marks :120 Component 1 (CEM):120 marks Continuous evaluation in Theory : 20 marks Assessment in Theory : 20 marks Continuous evaluation in Practicals : 20 marks Viva voce : 20 marks Assignment : 40 marks Pass requirement A minimum of 40% marks in component 1 Attendance requirement 85% attendance is mandatory to be eligible for assessment. Page 1 of 6 MSRUAS II. MDS – PGPERI02 Specifications-2015 Teaching , Learning and Assessment 1. Intended Module Learning Outcomes (ILO) After undergoing this Module, the student will be able to 1. 2. 3. 4. 5. 6. 2. Describe the etiopathogensis of periodontal disease Discuss the influence of systemic diseases in periodontal status Describe the prognostic and risk factors for periodontal disease Perform oral hygiene measures and procedures to patients Plan non surgical treatmentstrategies for periodontal disease Provide empathetically periodontal disease treatment for medically compromised patients Module Contents Theory 1. Etiopathogenesis of Periodontal Diseases- Classification of periodontal diseases and conditions, Epidemiology of gingival and periodontal diseases, Defense mechanisms of gingiva, Periodontal microbiology, Basic concepts of inflammation and immunity, Microbial interactions with the host in periodontal diseases, Pathogenesis of plaque associated periodontal diseases, Dental calculus, Role of iatrogenic and other local factors, Genetic factors associated with periodontal diseases, Influence of systemic diseases and disorders of the periodontium, Role of environmental factors in the etiology of periodontal disease, Stress and periodontal diseases, Occlusion and periodontal diseases, Smoking and tobacco in the etiology of periodontal diseases, AIDS and periodontium, Dentinal hypersensitivity, Plaque Control for Periodontal Patients, Gingival Enlargement, Acute Gingival Infections 2. Non Surgical Therapy- Phase I Treatment Protocol-Preparation of tooth surface, Plaque control, Anti Microbial and other drugs used in periodontal therapy and wasting diseases of teeth, Periodontal management of HIV infected patients, Occlusal evaluation and therapy in the management of periodontal diseases, Role of orthodontics as an adjunct to periodontal therapy, Special emphasis on precautions and treatment for medically compromised patients, Periodontal splints, Management of dentinal hypersensitivity. 3. Systems Biology, Supportive Periodontal Therapy including Risk Assessment, Advanced Diagnostic Aids. Clinical Work 1. Comprehensive non surgical periodontal management including Case history recording, scaling both hand and ultrasonic, root planing, splinting and coronoplasty 90 cases 3. Module Teaching and Learning Methods Teaching and Learning Methods Duration in Hours Face to Face Lectures 15 Seminars, Journal clubs, IDM 105 120 Page 2 of 6 MSRUAS MDS – PGPERI02 Specifications-2015 Demonstrations 1. Demonstration using Videos 30 2. Demonstration using Physical Models/Systems 30 3. Demonstration on a Computer Clinical Work 1. Pre Clinical area 2. Clinical Area 390 3. Hospital Setup 4. Field work/dental camp 20 480 5. Outreach centers Others 1. Case Study Presentation 2. Guest Lecture 10 3. Industry/Field Visit 4. Brain Storming Sessions 20 5. Group Discussions 80 6. Discussing Possible Innovations 4. Term Tests, Laboratory Examination/Written Examination, Presentations 40 Total Duration in Hours 640 Method of Assessment This Module will be assessed for a weightage of 120 marks; assessment in theory : 40 marks , in practicals/clinical : 40 marks and an assignment for 40 marks 1. Component 1A will be as assessment in theory for 20 marks conducted at the end of term while 20 marks will be assigned for seminars, journal clubs, IDM or any other such academic activity. 2. Component 1B will be assessments in regular chair side discussions of practicals/clinical for 20 marks and viva voce marks for 20 marks. 3. Component 1C will be an assignment that will be submitted as a word document The assessment questions are set to test the learning outcomes. In each component certain learning outcomes are assessed. Page 3 of 6 MSRUAS MDS – PGPERI02 Specifications-2015 The following table illustrates the focus of learning outcome in each component assessed: Intended Learning Outcome 1 2 3 4 5 6 Component-1 Theory A Practical B Assignment C X x X X X X x x Component 1 will be moderated by a second examiner. 5. Reassessment 1. A student having met attendance requirement and happens to fail in component-1 will be asked to resit for assessment in theory and viva voce. 2. A student who fails in component 1 inspite of Resit examination is required to re-register the module in the next offered term and complete component 1. 3. The maximum number of such opportunities are limited and as per the academic regulations governing this course. 6. Achieving Learning Outcomes The following skills are directly or indirectly imparted to the students in the following teaching and learning methods: Curriculum and Capabilities S.No How imparted during the Module Skills 1. Knowledge Seminars, Journal clubs 2. Understanding Seminars, Journal clubs 3. Critical Skills Class room lectures, Seminars, Journal clubs 4. Analytical Skills Class room lectures and tutorials 5. Problem Solving Skills Clinical posting 6. Practical Skills Clinical posting 7. Group Work Assignment, Clinical posting 8. Self Learning Assignment, Clinical posting, Tutorials 9. Written Communication Skills Assignment, 10. Verbal Communication Skills Clinical posting 11. Presentation Skills Clinical posting, Seminars, Journal clubs and IDM 12. Behavioural Skills Clinical posting 13. Information Management Assignment, Tutorial, Seminars, Journal clubs 14. Personal Management Clinical posting 15. Leadership Skills Group discussion Page 4 of 6 MSRUAS III MDS – PGPERI02 Specifications-2015 Module resources Essential reading 1. Module notes 2. Newman MG. Carranza's clinical periodontology (2011), 11th ed., Elsevier. 3. Jan Lindhe ,Clinical Periodontology and Implant Dentistry (2003), 2 Volumes, 5th Edition, Wiley-Blackwell publishers Recommended reading 1. Sanjay Saraf (2003),Textbook of Oral Pathology,Jaypee publishers. 2. Shafer’s (2009)Textbook of Oral Pathology, 6th edition, Elsevier. 3. American Academy of Periodontology (2001). Glossary of periodontal terms. 4th ed. Chicago: American Academy of Periodontology. 4. Chai, Lei and Keung (2002),Current Trends in Periodontology and Implant Dentistry,Nova Science publishers. 5. Amin E. Hatem (2005),Epidemiology and Risk Factors of Periodontal Disease. 6. Nurcan Buduneli (2004) ,Pathogenesis and Treatment of Periodontitis. 7. Rose LF, Mealey BL (2004). Periodontology: Medicine, Surgery and Implants. Elsevier Mosby. 8. Seminars in Orthodontics , volume 14 Magazines & Journals 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Journal of Periodontology Periodontology 2000 Journal of Clinical Periodontolgy Ann Periodontol Journal of Periodontal Research Journal of Dental Research Risk Markers of Oral Diseases International Dental Journal Journal of Immunology Australian Dental Journal Archives of Oral Biology Quintessence International Clinical Oral Implants Research The Journal of Contemporary Dental Practice World Journal of Dentistry Websites 1. 2. 3. 4. 5. 6. http://www.joponline.org http://onlinelibrary.wiley.com/ http://jdr.sagepub.com/ http://www.sciencedirect.com/ http://www.ncbi.nlm.nih.gov/ http://europepmc.org/ Other Electronic Resources HELINET Page 5 of 6 MSRUAS IV. MDS – PGPERI02 Specifications-2015 Module Organization Module Code PGPERI02 Module Title Clinical Phase Basics – 1 Module Teacher/s Name Dr Bhavya Shetty Module Teacher Contact Details Phone: E-mail: 09880262593 bhavya.pd.ds@msruas.ac.in Module Specifications Approval Date Next Module Specifications Review Date: Page 6 of 6 MSRUAS MDS – PGPERI03 Specifications - 2015 Module Specifications: Module Title Clinical Phase Basics – 2 Module Code PGPERI03 Department Periodontology Faculty Dental Sciences I. 1. Module Summary Aim and Summary This module aims to train students in chemotherapeutic and surgical treatment of periodontal diseases. The student treat periodontal disease requiring systemic and or local drug delivery and host modulation therapy. The students will also understand and apply principles of periodontal surgery. The students perform scaling with ultrasonic instrumentation. The student demonstrate different types of incisions and suturing techniques on models. 2. Module Size and Credits: Number of credits 24 Total hours of class room interaction during the module 120 Number of tutorial hours -- Number of clinical hours 480 Number of weeks 22 weeks. Department responsible Periodontology Module marks Total Marks :120 Component 1 (CEM):120 marks Continuous evaluation in Theory : 20 marks Assessment inTheory : 20 marks Continuous evaluation in Practicals : 20 marks Viva voce : 20 marks Assignment : 40 marks Pass requirement A minimum of 40% marks in component 1 Attendance requirement 85% attendance is mandatory to be eligible for assessment. Page 1 of 6 MSRUAS II. MDS – PGPERI03 Specifications - 2015 Teaching , Learning and Assessment 1. Intended Module Learning Outcomes (ILO) After undergoing this Module, the student will be able to 1. 2. 3. 4. 5. 6. 2. Describe the principles of surgery for periodontal therapy Differentiate periodontal diseases requiring systemic and local drug delivery Select periodontal conditions requiring host modulation therapy Provide hand scaling and ultrasonic scaling Demonstrate different incisions and suturing techniques Plan surgical treatment for various gingival enlargement Module Contents Theory 1. General Principles of Periodontal Surgery & Treatment Planning- Patient preparation, Emergency equipment, Periodontal dressings, Management of post operative pain, Surgical instruments- Excisional and incisional instruments, Surgical curettes and sickles, Periosteal elevators, Surgical chisels, Tissue forceps, Scissors and nippers, Needle holders, 2. Gingival Surgical Techniques -Gingival curettage- Rationale, indications, Procedure, Healing, Clinical appearance after scaling and curettage, Gingivectomy techniqueIndications & contraindications, gingivoplasty, healing, Gingivectomy by electrosurgery, Laser Gingivecotmy, Gingivectomy by chemosurgery. 3. Treatment of gingival enlargements-Chronic inflammatory enlargement, periodontal and gingival abscess, Drug associated enlargements, leukemic enlargements, Gingival enlargement in pregnancy , 4. Non-Surgical Pocket Therapy, Chemotherapeutics- systemic administration of antibiotics,Serial and combination antibiotic therapy, Local delivery of antibiotics,Tetracycline fibers, subgingival Dox, Subgingival Minocycline, subgingivalmetronidaszole, 5. Host Modulation Therapy- Host response, Host modulatory therapy, Host modulation and comprehensive periodontal management, Subantimicrobial dose doxycycline, Emerging Host modulatory therapies, 6. Sonic and Ultra Sonic Instrumentation- Mechanism of action, types of power instruments, efficacy and clinical outcomes, Efficiency, Special considerations( aerosol, Cardiac pacmakers), Supragingival and Subgingival Irrigation- Professionally delivered irrigation,Homeirrigation,Clinical outcomes Clinical Work Comprehensive non surgical and surgical periodontal management including Case history recording, scaling both hand and ultrasonic, root planing, splinting, coronoplasty, curettage and esthetic procedures - 120 cases Different types of incision and suturing techniques on simulators/models. Page 2 of 6 MSRUAS 3. MDS – PGPERI03 Specifications - 2015 Module Teaching and Learning Methods Teaching and Learning Methods Duration in Hours Face to Face Lectures 15 Seminars, Journal clubs, IDM 105 120 Demonstrations 1. Demonstration using Videos 20 2. Demonstration using Physical Models/Systems 20 3. Demonstration on a Computer Clinical Work 1. Pre Clinical area 20 2. Clinical Area 300 3. Hospital Setup 4. Field work/dental camp 10 480 5. Outreach centres Others 1. Case Study Presentation 2. Guest Lecture 10 3. Industry/Field Visit 4. Brain Storming Sessions 20 5. Group Discussions 80 6. Discussing Possible Innovations 4. Term Tests, Laboratory Examination/Written Examination, Presentations 40 Total Duration in Hours 640 Method of Assessment This Module will be assessed for a weightage of 120 marks; assessment in theory : 40 marks , in practicals/clinical : 40 marks and an assignment for 40 marks 1. Component 1A will be as assessment in theory for 20 marks conducted at the end of term while 20 marks will be assigned for seminars, journal clubs, IDM or any other such academic activity. 2. Component 1B will be assessments in regular chair side discussions of practicals/clinical for 20 marks and viva voce marks for 20 marks. 3. Component 1C will be an assignment that will be submitted as a word document Page 3 of 6 MSRUAS MDS – PGPERI03 Specifications - 2015 The assessment questions are set to test the learning outcomes. In each component certain learning outcomes are assessed. The following table illustrates the focus of learning outcome in each component assessed: Intended Learning Outcome 1 2 3 X X X 4 5 6 Component-1 Theory A Practical B Assignment C X X X X X Component 1 will be moderated by a second examiner. 5. Reassessment 1. A student having met attendance requirement and happens to fail in component-1 will be asked to resit for assessment in theory and viva voce. 2. A student who fails in component 1 inspite of Resit examination is required to reregister the module in the next offered term and complete component 1. 3. The maximum number of such opportunities are limited and as per the academic regulations governing this course.. 6. Achieving Learning Outcomes The following skills are directly or indirectly imparted to the students in the following teaching and learning methods: Curriculum and Capabilities S.No How imparted during the Module Skills 1. Knowledge Seminars, Journal clubs 2. Understanding Seminars, Journal clubs 3. Critical Skills Class room lectures, Seminars, Journal clubs 4. Analytical Skills Class room lectures and tutorials 5. Problem Solving Skills Clinical posting 6. Practical Skills Clinical posting 7. Group Work Assignment, Clinical posting 8. Self Learning Assignment, Clinical posting, Tutorials 9. Written Communication Skills Assignment, 10. Verbal Communication Skills Clinical posting 11. Presentation Skills Clinical posting, Seminars, Journal clubs and IDM 12. Behavioral Skills Clinical posting 13. Information Management Assignment, Tutorial, Seminars, Journal clubs Page 4 of 6 MSRUAS III MDS – PGPERI03 Specifications - 2015 14. Personal Management Clinical posting 15. Leadership Skills Group discussion Module resources Essential reading 1. Carranza, F. A., Newman, M. G., Takei, H. H., & Klokkevold, P. R.(2006).Carranza's Clinical Periodontology. St. Louis, Mo, Saunders Elsevier. 2. Lindhe, J., Karring, T., & Lang, N. P. (2003). Clinical Periodontology and Implant Dentistry. Oxford, Uk, Blackwell. Recommended reading 1. American Academy Of Periodontology. (1989). Clinical Periodontology: 3rdWorld workshop : Discussions. AAP.AMIN E. HATEM. (2012). Epidemiology and Risk Factors of Periodontal Disease. INTECH Open Access Publisher. 2. Buduneli, N. (2012). Pathogenesis and Treatment of Periodontitis. Magazines & Journals 1. Journal of Periodontology 2. Periodontology 2000 3. Journal of Clinical Periodontology 4. Annals of Periodontology 5. Journal of Periodontal Research 6. Journal of Dental Research 7. Risk Markers of Oral Diseases 8. International Dental Journal 9. Journal of Immunology 10. Australian dental journal 11. Archives of oral biology 12. Quintessence International 13. Clinical Oral Implants Research 14. The Journal of Contemporary Dental Practice 1. World Journal of Dentistry Websites 1. 2. 3. 4. 5. 6. 7. www.jisponline.com www.joponline.org www.onlinelibrary.wiley.com www.jdr.sagepub.com www.sciencedirect.com www.ncbi.nlm.nih.gov www.ijprd.com Page 5 of 6 MSRUAS IV. MDS – PGPERI03 Specifications - 2015 Module Organization Module Code PGPERI03 Module Title Clinical Phase Basics – 2 Module Teacher/s Name Dr Kranti Module Teacher Contact Details Phone: E-mail: 09880382393 kranti.pd.ds@msruas.ac.in Module Specifications Approval Date Next Module Specifications Review Date: Page 6 of 6 MSRUAS MDS – PGPERI04 Specifications-2015 Module Specifications: Module Title Clinical Phase Advanced – 1 Module Code PGPERI04 Department Periodontology Faculty Dental Sciences I. Module Summary Aim and Summary This module aims to train the students to implement periodontal disease control programs for patients with emphasis on interdisciplinary approaches. The student will be trained to perform advanced surgical and maintenance procedures for osseous defects and furcation involvement. The student will learn to integrate multiple disciplines in the treatment of complex periodontal conditions. The student will also use simulated software to plan implant placement. 2. Module Size and Credits: Number of credits 24 Total hours of class room interaction during the Module 120 Number of tutorial hours -- Number of clinical hours 480 Number of weeks 22 weeks. Department responsible Periodontology Module marks Total Marks :120 Component 1 (CEM):120 marks Continuous evaluation in Theory : 20 marks Assessment in Theory : 20 marks Continuous evaluation in Practicals : 20 marks Viva voce : 20 marks Assignment : 40 marks Pass requirement A minimum of 40% marks in component 1 Attendance requirement 85% attendance is mandatory to be eligible for assessment. Page 1 of 6 MSRUAS II. MDS – PGPERI04 Specifications-2015 Teaching , Learning and Assessment 1. Intended Module Learning Outcomes (ILO) After undergoing this Module, the student will be able to 1. Explain cumulative interceptive supportive periodontal therapy 2. Differentiate the merits and demerits of flap designs and plan surgical procedures accordingly. 3. Plan treatment for furcation related periodontal conditions. 4. Formulate an interdisciplinary approach to treat complex periodontal diseases. 5. Justify the role of occlusal correction in the management of periodontally involved teeth. 6. Demonstrate use of simulated software for planning implant supported therapy. 2. Module Contents Theory 1. Periodontal Maintenance- CIST- Supportive periodontal treatment- Rationale, Maintenance program- examination and evaluation, checking of plaque control, recurrence of periodontal disease, classification of post treatment patients, Tests for disease activity, Maintenance for dental implant patients 2. Results of periodontal treatment – Prevention and treatment of gingivitis, Tooth mortality Flap Technique for Pocket Therapy- Periodontal flap, Classification of flaps, Flap design, Incisions-Horizontal and vertical, Elevation of the flap, Suturing techniques, Healing after flap surgery, Modified Widman Flap, Undisplaced flap, Apically displace flap, Flaps for reconstructive therapy, Distal Molar surgery 3. Furcation; Problem and its management-Etiology, Diagnosis and classification, Local Anatomic factors- Root trunk length, root length, root form, interradicular dimensions, anatomy of furcation, Anatomy of Bony lesions, Treatment- Root resection, hemisection, Reconstruction, extraction 4. The periodontic – endodontic continuum- Pulpal disease, Effects of periodontitis on dental pulp, Differentiation between pulpal and periodontal abscess and management, Therapeutic management of pulpal and periodontal disease, Special issues in endodontic therapy, Advanced Gingival Surgical Techniques, Management of Periodontal Emergencies, Interdisciplinary Approaches including Perio-Restorative, Perio-Ortho, Perio-Endo and Perio-Prosthetics-Benefits of ortho therapy, preorthodontic osseous surgery, ortho treatment of gingival discrepancies, Hemiseptal defects. 5. Implant planning software.-Implant simulation software program Clinical Work Comprehensive non surgical and surgicalperiodontal management including Case history recording, scaling both hand and ultrasonic, root planing, splinting, coronoplasty, curettage,esthetic procedures, mucogingival and flap surgeries - 120 cases 3. Module Teaching and Learning Methods Page 2 of 6 MSRUAS MDS – PGPERI04 Specifications-2015 Teaching and Learning Methods Duration in Hours Face to Face Lectures 15 Seminars, Journal clubs, IDM 105 120 Demonstrations 1. Demonstration using Videos 10 2. Demonstration using Physical Models/Systems 10 3. Demonstration on a Computer Clinical Work 1. Pre Clinical area 2. Clinical Area 380 3. Hospital Setup 4. Field work/dental camp 10 5. Outreach centres 10 480 Others 1. Case Study Presentation 05 2. Guest Lecture 05 3. Industry/Field Visit 4. Brain Storming Sessions 20 5. Group Discussions 30 6. Discussing Possible Innovations 4. Term Tests, Laboratory Examination/Written Examination, Presentations 40 Total Duration in Hours 640 Method of Assessment This Module will be assessed for a weightage of 120 marks; assessment in theory : 40 marks , in practicals/clinical : 40 marks and an assignment for 40 marks a. Component 1A will be as assessment in theory for 20 marks conducted at the end of term while 20 marks will be assigned for seminars, journal clubs, IDM or any other such academic activity. b. Component 1B will be assessments in regular chair side discussions of practicals/clinical for 20 marks and viva voce marks for 20 marks. c. Component 1C will be an assignment that will be submitted as a word document Page 3 of 6 MSRUAS MDS – PGPERI04 Specifications-2015 The assessment questions are set to test the learning outcomes. In each component certain learning outcomes are assessed. The following table illustrates the focus of learning outcome in each component assessed: Intended Learning Outcome 1 2 3 4 5 6 Component-1 Theory A Practical B Assignment C X X X X X X X X X Component-1 will be moderated by a second examiner. 5. Reassessment 1. A student having met attendance requirement and happens to fail in component-1 will be asked to resit for assessment in theory and viva voce. 2. A student who fails in component 1 inspite of Resit examination is required to reregister the module in the next offered term and complete component 1. 3. The maximum number of such opportunities are limited and as per the academic regulations governing this course. 6. Achieving Learning Outcomes The following skills are directly or indirectly imparted to the students in the following teaching and learning methods: Curriculum and Capabilities S.No How imparted during the Module Skills 1. Knowledge Seminars, Journal clubs 2. Understanding Seminars, Journal clubs 3. Critical Skills Class room lectures, Seminars, Journal clubs 4. Analytical Skills Class room lectures and tutorials 5. Problem Solving Skills Clinical posting 6. Practical Skills Clinical posting 7. Group Work Assignment, Clinical posting 8. Self Learning Assignment, Clinical posting, Tutorials 9. Written Communication Skills Assignment, 10. Verbal Communication Skills Clinical posting 11. Presentation Skills Clinical posting, Seminars, Journal clubs and IDM 12. Behavioural Skills Clinical posting 13. Information Management Assignment, Tutorial, Seminars, Journal clubs Page 4 of 6 MSRUAS III MDS – PGPERI04 Specifications-2015 14. Personal Management Clinical posting 15. Leadership Skills Group discussion Module resources ESSENTIAL READING 1. Fermin A. Carranza et al. (2014) Clinical Periodontology. 12th Edition. Elsevier Health Sciences. 2. Jan Lindhe, Niklaus P. Lang and Thorkild Karring (2009) Clinical Periodontology and Implant Dentistry. 5th edition. Wiley RECOMMENDED READING 1. Naoshi Sato. (2000) Periodontal surgery- A Clinical Atlas, Quintessence. 2. Edward Cohen.(2007) Atlas of Cosmetic and Reconstructive Periodontal Surgery. 3rd edition. People’s Medical Publishing House- USA. 3. J. Bernand Kieser.(1990) Periodontology: A Practical Approach. 4. Herbert F. Wolf and Thomas M. Hassel.(2006) Color Atlas Of Dental HygienePeriodontolgy; 1st edition. Grammlich, Pliezhausen. 5. Francis G Serio and Charles.E. Hawley.(2009) Manual Of Clinical Periodontology.3rd edition. Lexi-Comp Incorporated. 6. Enrico.G. Bartolucci(2001). Periodontology. RC LIBRI. 7. Rajendran and Sivapathasundaram.(2009). Shafer’s Textbook of Oral Pathology. 6th edition. Elsevier. 8. Genco R J, H M Goldman and W. Cohen (1980). Contemporary Periodontology. 6th edition. MOSBY. 9. Robert P. Langlais, Craig S. Miller, Jill Shiffer Nield-Gehrig(2009). Color Atlas of Common Oral Diseases. 4th edition . Lippincott Williams & Wilkins MAGAZINES AND JOURNALS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Journal of Dental Research Quintessence International International Dental Journal Journal of American Dental Association British Dental Journal Australian dental journal Journal of Canadian Dental Association Periodontology 2000 Journal of periodontology J Clinical Periodontology American Academy of Periodontology Guidelines for periodontal therapy Brazilian Dental Journal J Prosthetic Dentistry Websites 1. http://www.joponline.org/ 2. http://www.ncbi.nlm.nih.gov/nlmcatalog/0425123 Page 5 of 6 MSRUAS MDS – PGPERI04 Specifications-2015 3. 4. 5. 6. IV. http://www.jisponline.com/ http://jdr.sagepub.com/ http://www.ijdr.in/ http://www.jcdr.in/ Module Organization Module Code PGPERI04 Module Title Clinical Phase Advanced - 1 Module Teacher/s Name Dr Ashwini Module Teacher Contact Details Phone: E-mail: 09448852742 ashwini.pd.ds@msruas.ac.in Module Specifications Approval Date Next Module Specifications Review Date: Page 6 of 6 MSRUAS MDS – PGPERI05 Specifications - 2015 Module Specifications: Module Title Clinical Phase Advanced – 2 Module Code PGPERI05 Department Periodontology Faculty Dental Sciences I. 1. Module Summary Aim and Summary This module aims to train the students to perform aesthetic, resective, regenerative and rehabilitative periodontal surgical procedures. The student will learn to perform regenerative procedures and periodontal plastic surgeries. The students will also learn to use tissue contouring systems like lasers. The student will be able to apply their anatomical knowledge for presurgical examination of patients requiring dental implants and demonstrate practical competence in surgical placement of dental implants. 2. Module Size and Credits: Number of credits 24 Total hours of class room interaction during the module 120 Number of tutorial hours -- Number of clinical hours 480 Number of weeks 22 weeks. Department responsible Periodontology Module marks Total Marks :120 Component 1 (CEM):120 marks Continuous evaluation in Theory : 20 marks Assessment in Theory : 20 marks Continuous evaluation in Practicals : 20 marks Viva voce : 20 marks Assignment : 40 marks Pass requirement A minimum of 40% marks in component 1 Attendance requirement 85% attendance is mandatory to be eligible for assessment. Page 1 of 6 MSRUAS II. MDS – PGPERI05 Specifications - 2015 Teaching , Learning and Assessment 1. Intended Module Learning Outcomes (ILO) After undergoing this Module, the student will be able to 1. Develop surgically aesthetic periodontal treatment plans prior to prosthodontic rehabilitation. 2. Justify surgical procedures to enhance long term periodontal prognosis. 3. Demonstrate appropriate resective and regenerative surgical procedures. 4. Employ recent advances in surgical techniques like lasers and microsurgery 5. Plan implants surgery using advanced imaging techniques and prospective rehabilitation. 6. Perform simple implant surgery with emphasis on peri implant aesthetics and maintenance. 2. Module Contents Theory 1. Preparation of Periodontium for Restorative and Prosthetic Dentistry, Periodontal Plastic and Aesthetic Surgery-Etiology of marginal tissue recession, Factors affecting surgical outcome, Techniques to increase attached gingiva- gingival augmentation apical to recession, gingival augmentation coronal to recession, Techniques to deepen vestibule, Techniques to remove frenum- Frenectomy or frenotomy, Criteria for technique selection 2. Resective and Regenerative Osseous Surgery- Methods of Resective osseous surgery, Osseous Resection techniques, Graft materials and procedures, Non bone graft associated procedures, Evaluation of new attachment and periodontal reconstruction, Recent Advances in Surgical Technology including Microsurgery and LASERS- magnifying loupes, surgical microscope, Biological, Clinical and Diagnostic Aspects of Dental Implants- Introduction and historical review, Biological, clinical and surgical aspects of dental implants, 3. Diagnosis and treatment planning- Imaging, Cross sectional imaging, Interactive simulation software program, Standard Implant Surgical Procedures- Implant selection and design considerations, General principles of implant surgery, Submerged and non submerged implants, Prosthetic aspects of dental implants, Special emphasis on plaque control measures for implant patients. Clinical Work Comprehensive non surgical and surgical periodontal management including Case history recording, scaling both hand and ultrasonic, root planing, use of LASERS, mucogingival and flap surgeries including implant placement - 90 cases 3. Module Teaching and Learning Methods Teaching and Learning Methods Duration in Hours Face to Face Lectures 15 Seminars, Journal clubs, IDM 105 120 Page 2 of 6 MSRUAS MDS – PGPERI05 Specifications - 2015 Demonstrations 1. Demonstration using Videos 10 2. Demonstration using Physical Models/Systems 3. Demonstration on a Computer Clinical Work 1. Pre Clinical area 2. Clinical Area 370 3. Hospital Setup 4. Field work/dental camp 30 480 5. Outreach centres Others 1. Case Study Presentation 05 2. Guest Lecture 05 3. Industry/Field Visit 4. Brain Storming Sessions 20 5. Group Discussions 40 6. Discussing Possible Innovations 4. Term Tests, Laboratory Examination/Written Examination, Presentations 40 Total Duration in Hours 640 Method of Assessment This Module will be assessed for a weightage of 120 marks; assessment in theory : 40 marks , in practicals/clinical : 40 marks and an assignment for 40 marks a. Component 1A will be as assessment in theory for 20 marks conducted at the end of term while 20 marks will be assigned for seminars, journal clubs, IDM or any other such academic activity. b. Component 1B will be assessments in regular chair side discussions of practicals/clinical for 20 marks and viva voce marks for 20 marks. c. Component 1C will be an assignment that will be submitted as a word document The assessment questions are set to test the learning outcomes. In each component certain learning outcomes are assessed. The following table illustrates the focus of learning outcome in each component assessed: Page 3 of 6 MSRUAS MDS – PGPERI05 Specifications - 2015 Intended Learning Outcome 1 2 3 4 5 X X 6 Component-1 Theory A Practical B Assignment C X X X X X X Component-1 will be moderated by a second examiner. 5. Reassessment 1. A student having met attendance requirement and happens to fail in component-1 will be asked to resit for assessment in theory and viva voce. 2. A student who fails in component 1 inspite of Resit examination is required to re-register the module in the next offered term and complete component 1. 3. The maximum number of such opportunities are limited and as per the academic regulations governing this course. 6. Achieving Learning Outcomes The following skills are directly or indirectly imparted to the students in the following teaching and learning methods: Curriculum and Capabilities S.No How imparted during the Module Skills 1. Knowledge Seminars, Journal clubs 2. Understanding Seminars, Journal clubs 3. Critical Skills Class room lectures, Seminars, Journal clubs 4. Analytical Skills Class room lectures and tutorials 5. Problem Solving Skills Clinical posting 6. Practical Skills Clinical posting 7. Group Work Assignment, Clinical posting 8. Self Learning Assignment, Clinical posting, Tutorials 9. Written Communication Skills Assignment, 10. Verbal Communication Skills Clinical posting 11. Presentation Skills Clinical posting, Seminars, Journal clubs and IDM 12. Behavioural Skills Clinical posting 13. Information Management Assignment, Tutorial, Seminars, Journal clubs 14. Personal Management Clinical posting 15. Leadership Skills Group discussion Page 4 of 6 MSRUAS III MDS – PGPERI05 Specifications - 2015 Module resources ESSENTIAL READING 1. Carranza, F. A., Newman, M. G., Takei, H. H., & Klokkevold, P. R. (2006).Carranza's Clinical Periodontology. St. Louis, Mo, Saunders Elsevier. 2. Lindhe, J., Karring, T., & Lang, N. P. (2003). Clinical Periodontology And Implant Dentistry. Oxford, Uk, Blackwell RECOMMENDED READING 1. Sato, N. (2000). Periodontal surgery: A Clinical Atlas. Chicago, Quintessence Pub. Co 2. Cohen, E. S. (2007). Atlas of Cosmetic and Reconstructive Periodontal Surgery. Hamilton,BCDecker. 3. Kieser, J. B. (1990). Periodontology: A Practical Approach. London, Wright. 4. Nevins, M., & Mellonig, J. T. (1998). Periodontal Therapy: Clinical Approaches and Evidence Of Success. Chicago, Quintessence Pub. Co. 5. Serio, F. G., & Hawley, C. E. (2009). Manual of Clinical Periodontology: A Reference Manual For Diagnosis&Treatment. Hudson, Ohio, Lexi-Comp. 6. Bartolucci, E. G. (2001). Periodontology: Text-Atlas. Milan, Italy, RC Libri 7. Rajendran, R., Sivapathasundharam, B., & Shafer, W. G. (2012). Shafer's textbook of OralPathology. 8. J., Goldman, H. M., Cohen, D. W., & Goldman, H. M. (1990).Contemporary Periodontology. St. Louis, Mosby. 9. Langlais, R. P., Miller, C. S., & Nield-Gehrig, J. S. (2009). Color Atlas Of Common Oral Diseases. MAGAZINES AND JOURNALS 1. 2. 3. 4. 5. 6. Periodontology 2000 Journal of periodontology J Clinical Periodontology American Academy of Periodontology Guidelines for periodontal therapy Brazilian Dental Journal J Prosthetic Dentistry Websites 1. 2. 3. 4. 5. 6. http://www.joponline.org/ http://www.ncbi.nlm.nih.gov/nlmcatalog/0425123 http://www.jisponline.com/ http://jdr.sagepub.com/ http://www.ijdr.in/ http://www.jcdr.in/ Page 5 of 6 MSRUAS IV. MDS – PGPERI05 Specifications - 2015 Module Organization Module Code PGPERI05 Module Title Clinical Phase Advanced - 2 Module Teacher/s Name Dr Hema Seshan Module Teacher Contact Details Phone: E-mail: 09342284197 hemaseshan.pd.ds@msruas.ac.in Module Specifications Approval Date Next Module Specifications Review Date: Page 6 of 6 MSRUAS MDS – PGPERI06 Specifications-2015 Module Specifications: Module Title Clinical Phase Advanced –3 Module Code PGPERI06 Department Periodontology Faculty Dental Sciences I. Module Summary This module aims to train the students to handle complex implant based rehabilitation options. The student will be able to evaluate host sites for bone augmentation and perform the same. The students will be able to manage peri implant complications using both surgical and non surgical means. The students will comprehend the possible legal outcomes related to comprehensive management of periodontal patients. 2. Module Size and Credits: Number of credits 20 Total hours of class room interaction during the module Number of tutorial hours 60 Number of clinical hours 540 Number of weeks 16 weeks. Department responsible Periodontology Module marks Pass requirement Attendance requirement Total Marks :600 Component 3 (CEE):600 Theory Assessment with 4 papers: 4 X 75 = 300 marks Viva voce : 100 marks Clinical Assessment : 200 marks 50% aggregate of all 4 theory papers, 50% in practical/clinical and viva voce put together 85% attendance is mandatory to be eligible for assessment. Page 1 of 6 MSRUAS II. MDS – PGPERI06 Specifications-2015 Teaching , Learning and Assessment 1. Intended Module Learning Outcomes (ILO) After undergoing this Module, the student will be able to 1. Plan periodontal treatment for complex situations 2. Evaluate surgical procedure for bone loss 3. Perform non surgical and surgical treatment of periimplant complications and periodontal conditions. 4. Explain legal and practical issues in comprehensive management of periodontal patients 2. Module Contents Theory 1. Localized Bone Augmentation and Implant Site Development including GBR- Barrier membranes, Harvesting autogenous bone, Localized ridge augmentation, Management of extractions- Immediate implants, Delayed implant, Staged implant, Delayed Vs Staged technique 2. Advanced Implant Surgical Procedures- Maxillary sinus elevation and bone augmentation, Supracrestal/ Vertical bone augmentation, Growth factors in bone augmentation, 3. Implant Related Complications and Failures- Diagnosis and treatment of Peri Implant Complications, Types and prevalence of implant complications, surgical complications, biologic complications- dehiscence and recession, periimplantitis and bone loss, implant loss or failure, technical or mechanical complications- screw loosening and fracture, implant fracture, Esthetic and phonetic complications 4. Evidence Based Decision Making, Ethical, Legal and Practical Issues in Comprehensive Management of Periodontal Patients& Jurisprudence- Practical considerations in ethical practice of dentistry, common periodontal malpractice issues, Legal elements of malpractice, Malpractice insurance. 5. Module contents of PGPERI 1-5 Clinical Work Comprehensive non surgical and surgicalperiodontal management including Case history recording, scaling both hand and ultrasonic, root planing, use of LASERS, mucogingival and flap surgeries including implant rehabilitation - 30 cases 3. Module Teaching and Learning Methods Teaching and Learning Methods Tutorials Duration in Hours 60 60 Demonstrations 1. Demonstration using Videos 540 2. Demonstration using Physical Models/Systems 3. Demonstration on a Computer Page 2 of 6 MSRUAS MDS – PGPERI06 Specifications-2015 Clinical Work 1. Pre Clinical area 2. Clinical Area 410 3. Hospital Setup 4. Field work/dental camp 30 5. Outreach centers 60 Others 1. Case Study Presentation 2. Guest Lecture 10 3. Industry/Field Visit 4. Brain Storming Sessions 20 5. Group Discussions 30 6. Discussing Possible Innovations 4. Term Tests, Laboratory Examination/Written Examination, Presentations 40 Total Duration in Hours 640 Method of Assessment At the end of the 6th modules, a Course end exam will be held as per the norms of the University/DCI for Assessment. a) Assessment for theory will for 300 marks consisting of 4 papers as specified by DCI. i. Paper 1: Applied Anatomy, Physiology, Pathology, Microbiology, Nutrition and Dietetics in relation to periodontium ii. Paper 2: Etiopathogenesis and diagnosis in Periodontology iii. Paper 3: Clinical Periodontology and oral implantology iv. Paper 4: Clinical Periodontology – essay questions b) A structured viva voce exam for 80 marks and a pedagogy for 20 marks will be conducted during practical exam. c) Structured clinical exam for different exercises will be assessed for 200 marks. a) Case discussion and performing a periodontal flap surgery for one quadrant– 140 mark b) Case discussion and planning of comprehensive periodontal treatment regimen – 60 marks The assessment questions are set to test the learning outcomes. In each component certain learning outcomes are assessed. The following table illustrates the focus of learning outcome in each component assessed: Page 3 of 6 MSRUAS MDS – PGPERI06 Specifications-2015 Intended Learning Outcome 1 2 3 4 Component-1 5. Theory A X X Practical B X X Viva Voce C X X X X X X Reassessment 1. A student having met attendance requirement and required credits and fails in component-2 will be asked to resit for examination (Resit examination) that will be conducted per university Academic Calendar 2. The maximum number of such opportunities are limited and as per the academic regulations governing this course. 6. Achieving Learning Outcomes The following skills are directly or indirectly imparted to the students in the following teaching and learning methods: Curriculum and Capabilities S.No How imparted during the Module Skills 1. Knowledge Seminars, Journal clubs 2. Understanding Seminars, Journal clubs 3. Critical Skills Class room lectures, Seminars, Journal clubs 4. Analytical Skills Class room lectures and tutorials 5. Problem Solving Skills Clinical posting 6. Practical Skills Clinical posting 7. Group Work Assignment, Clinical posting 8. Self Learning Assignment, Clinical posting, Tutorials 9. Written Communication Skills Assignment, 10. Verbal Communication Skills Clinical posting 11. Presentation Skills Clinical posting, Seminars, Journal clubs and IDM 12. Behavioural Skills Clinical posting 13. Information Management Assignment, Tutorial, Seminars, Journal clubs 14. Personal Management Clinical posting 15. Leadership Skills Group discussion Page 4 of 6 MSRUAS III MDS – PGPERI06 Specifications-2015 Module resources ESSENTIAL READING 1. Newman MG. Carranza's Clinical Periodontology (2011), 11th ed., Elsevier. 2. Jan Lindhe (2003), Clinical Periodontology and Implant Dentistry, 2 Volumes, 5th Edition, Wiley-Blackwell publishers. 3. Cohen, E. (2006) Atlas of Cosmetic and Reconstructive Periodontal Surgery. 3rd ed. Hamilton: BC Deker Inc. RECOMMENDED READING: 1. Deibart, Practical advanced periodontsl surgery, Wiley-Blackwell publishers 2. Michael Sonick, Debby Hwang , (2012), Implant Site Development . Wiley-Blackwell 3. Daniel Buser, Christer Dahlin, Robert K. Schenk,(1994), Guided Bone Regeneration in Implant Dentistry by Quintessence Books. 4. Boyne PJ: History of maxillary sinus grafting- The Sinus Bone Graft, 2nd ed. 5. Carl E. Misch ,(2009),Contemporary Implant Dentistry . 6. Jacques Malet, Francis Mora, Philippe ,(2012),Bouchard Implant Dentistry at a Glance . Wiley-Blackwell publishers 7. Schwarz, Frank and Becker, Jürgen, (2012),Peri-implant Infection: Etiology, Diagnosis and Treatment, Quintessence publishing, 1st edition. 8. Kumar Vipin (2013), Peri-Implantitis, Lambert Academic Publishing 9. Walter B. Hall ,(2003),Critical Decisions in Periodontology, 4 edition, Volume 1. 10. Gerard Byrne, (2014),Fundamentals of Implant Dentistry. Wiley-Blackwell publishers 11. Stuart Froum,(2010) Dental Implant Complications: Etiology, Prevention, and Treatment,Wiley-Blackwell publishers. 12. Francesco Chiappelli, Xenia Maria Caldeira Brant (2009),Evidence-Based Practice: Toward Optimizing Clinical Outcomes, Springer Science & Business Media. 13. Sanjeev Rastogi, Francesco Chiappelli (2008), Evidence-Based Practice in Complementary and Alternative Medicine . MAGAZINES & JOURNALS 1. 2. 3. 4. 5. 6. 7. Journal Of Periodontology Journal Of Clinical Periodontology Journal Of Periodontal & Implant Science Clinical Implant Dentistry And Related Research. Journal Of Periodontology & Implant Dentistry. Journal Of Periodontal Research. Periodontology 2000 Page 5 of 6 MSRUAS IV. MDS – PGPERI06 Specifications-2015 Module Organization Module Code PGPERI06 Module Title Clinical Phase Advanced - 3 Module Teacher/s Name Dr Mani Module Teacher Contact Details Phone: E-mail: 09448324342 mani.venkataraman@gmail.com Module Specifications Approval Date Next Module Specifications Review Date: Page 6 of 6