Learn How To Install and Program The SDC IP Pro™ Access

SECURITY DOOR CONTROLS IP PRO™ CLASS
Learn How To Install and Program
The SDC IP Pro™ Access Control System
IP Pro™ is a complete line of low power,
professional grade door access control
solutions – all easily connected and
powered by ordinary Ethernet network
cables providing incredible flexibility and
cost savings when installing access control.
• Review of PoE capable
locking hardware
• IP Pro™ feature and
benefits
• Hands on wiring of IP Pro
MARK THE DATE: June
24, 2015
Location: ADI Denver
5065 Klamath Street. Denver, CO 80221
• Hands on software
implementation
COURSE OBJECTIVES
• Q&A
• Become familiar
with SDC’s full line
of energy-efficient,
PoE capable locking
hardware
• Be able to install and
configure an IP Pro™
Controller and SDC
IPRW Wiegand Card
Reader
• Understand the
primary components
required to build
an access control
system using an IP
Pro™ system
• Be able to establish
communications
with the IP Pro™
Controller over a
simple network
At the completion of this training course, participants will:
®
ESA ACCREDITED
2 Credits
CLASS TIME: 1 - 3 PM
Note: Group Training Method
Bring Your Own PC.
Software Implementation
Will Require The Use of a
Windows-Based Laptop
• Be able to program
the IP Pro™ Controller
for a single user
credential, user
group, and user
schedule, using the
built-in web server
interface
Who Should Attend?
Professionals involved with
installation, configuration, and
design of physical security,
access control products
Contact Rhonda to reserve your spot:
800-413-8783 or rhonda@sdcsecurity.com