156-215.80-Exam-Dumps

Actual CheckPoint 156-215.80 Exam Dumps Updated 2019
20%
Discount
on
CheckPoint
156-215.80
https://www.dumps4success.com/156-215.80.html
Exam
Dumps.
For
more
info
Check Point Certified Security Administrator R80 Exam 156-215.80 preparation is not a piece of cake for
the professionals or full-time office workers as you actually need to invest time and mind for its
preparation. No doubt EN is very effort taking and difficult exam but it is not impossible to clear it.
Dumps4Success offers Check Point Certified Security Administrator R80 Exam 156-215.80 exam dumps
that includes guidelines and information according to the CheckPoint 156-215.80 exam. The Check Point
Certified Security Administrator R80 Exam 156-215.80 exam dumps involve content and instructions
which are explicitly designed to assist you in getting through the 156-215.80 exam.
The 156-215.80 Check Point Certified Security Administrator R80 Exam exam practice material includes
everything that covers the CheckPoint course content and prepares the candidate for all the possibilities
in the future. It includes study material, a pattern of Check Point Certified Security Administrator R80
Exam 156-215.80 exam, sample question papers and tips to make the Check Point Certified Security
Administrator R80 Exam journey successful for you. We hope that you’ll find our services very useful for
your upcoming exam.
156-215.80 Exam Preparation Material For Best
Result:
Our Check Point Certified Security Administrator R80 Exam 156-215.80 exam dumps has been designed
to enlighten the candidate about the whole thing. We make it sure that candidate is well aware of Check
Point Certified Security Administrator R80 Exam 156-215.80 exam scope. The whole plan focuses on the
preparation and guidance of a candidate until they are satisfied. The Check Point Certified Security
Administrator R80 Exam 156-215.80 exam dumps includes all the important areas which you need to
focus on if you want to get CheckPoint certification. Dumps4Success believes that the student deserves
to know every challenge regarding Check Point Certified Security Administrator R80 Exam 156-215.80
exam which he/she has to face in future. If we acknowledge everything clearly in the start then it
becomes easy for the candidate to prepare himself.
100 % Success CheckPoint 156-215.80 Exam Dumps:
The 156-215.80 exam is prepared by experts who have been in this field for years. They are well aware of
the pattern of exam and relevant study material. In fact, many of the writers have designed the Check
Point Certified Security Administrator R80 Exam 156-215.80 themselves. They are expert in training a
beginner to get an adequate understanding of CheckPoint course outline. So, with the help of
Dumps4Success guide, you are very much likely to get CheckPoint certification in the first attempt.
https://www.dumps4success.com/
156-215.80 Check Point Certified Security
Administrator R80 Exam Exam Quick Tips:
Many students rely on the internet for the preparation of Check Point Certified Security Administrator
R80 Exam 156-215.80 exam. Well, you can get study materials from the internet but it is always the
possibility that you are missing out something. On the other hand Dumps4Success is offering you
complete package in one deal. You do not have to look into different websites and libraries to collect all
the study material. You can get everything just a click away with this guide. Rather than wasting your
time & effort on finding different sources for EN, you can just rely on our guidebook to assist you in every
way.
100% Money Back Guarantee:
Dumps4Success cares about the candidate and want to facilitate them in every way. Although our plan
will help you in getting more than passing marks for CheckPoint 156-215.80 exam, if the candidate is
unable to pass the 156-215.80 exam after taking the sessions of our 156-215.80 exam dumps, then we
can refund your money under certain terms & conditions.
20%
Discount
on
CheckPoint
156-215.80
https://www.dumps4success.com/156-215.80.html
Exam
https://www.dumps4success.com/
Dumps.
For
more
info
Version: 17.0
Question: 1
Check Point ClusterXL Active/Active deployment is used when:
A. Only when there is Multicast solution set up
B. There is Load Sharing solution set up
C. Only when there is Unicast solution set up
D. There is High Availability solution set up
Answer: D
Question: 2
From the Gaia web interface, which of the following operations CANNOT be performed on a Security
Management Server?
A. Verify a Security Policy
B. Open a terminal shell
C. Add a static route
D. View Security Management GUI Clients
Answer: B
Question: 3
Which of the following are types of VPN communities?
A. Pentagon, star, and combination
B. Star, octagon, and combination
C. Combined and star
D. Meshed, star, and combination
Answer: D
Reference:
https://sc1.checkpoint.com/documents/R77/CP_R77_VPN_AdminGuide/html_frameset.htm?
topic=documents/R77/CP_R77_VPN_AdminGuide/13894
What are the three types of UserCheck messages?
A. inform, ask, and block
B. block, action, and warn
https://www.dumps4success.com/
C. action, inform, and ask
D. ask, block, and notify
Answer: A
Explanation/Reference:
Reference: https://sc1.checkpoint.com/documents/R80.10/WebAdminGuides/EN/
CP_R80.10_DataLossPrevention_AdminGuide/html_frameset.htm?topic=documents/R80.10/
WebAdminGuides/EN/CP_R80.10_DataLossPrevention_AdminGuide/94711
Question: 4
Which statement is TRUE of anti-spoofing?
A. Anti-spoofing is not needed when IPS software blade is enabled
B. It is more secure to create anti-spoofing groups manually
C. It is BEST Practice to have anti-spoofing groups in sync with the routing table
D. With dynamic routing enabled, anti-spoofing groups are updated automatically whenever there is a
routing change
Answer: C
Question: 5
How can the changes made by an administrator before publishing the session be seen by a superuser
administrator?
A. By impersonating the administrator with the ‘Login as…’ option
B. They cannot be seen
C. From the SmartView Tracker audit log
D. From Manage and Settings > Sessions, right click on the session and click ‘View Changes…’
Answer: C
Question: 6
Which Check Point software blade monitors Check Point devices and provides a picture of network and
security performance?
A. Application Control
B. Threat Emulation
C. Logging and Status
D. Monitoring
Answer: D
Reference: https://www.checkpoint.com/downloads/product-related/datasheets/DS_Monitoring.pdf
https://www.dumps4success.com/
Question: 7
Your internal networks 10.1.1.0/24, 10.2.2.0/24 and 192.168.0.0/16 are behind the Internet Security
Gateway.
Considering that Layer 2 and Layer 3 setup is correct, what are the steps you will need to do in
SmartConsole
in order to get the connection working?
A. 1. Define an accept rule in Security Policy.
2. Define Security Gateway to hide all internal networks behind the gateway’s external IP.
3. Publish and install the policy.
B. 1. Define an accept rule in Security Policy.
2. Define automatic NAT for each network to NAT the networks behind a public IP.
3. Publish the policy.
C. 1. Define an accept rule in Security Policy.
2. Define automatic NAT for each network to NAT the networks behind a public IP.
3. Publish and install the policy.
D. 1. Define an accept rule in Security Policy.
2. Define Security Gateway to hide all internal networks behind the gateway’s external IP.
3. Publish the policy.
Answer: C
Question: 8
True or False: The destination server for Security Gateway logs depends on a Security Management
Server configuration.
A. False, log servers are configured on the Log Server General Properties
B. True, all Security Gateways will only forward logs with a SmartCenter Server configuration
C. True, all Security Gateways forward logs automatically to the Security Management Server
D. False, log servers are enabled on the Security Gateway General Properties
Answer: B
Question: 9
Consider the Global Properties following settings:
https://www.dumps4success.com/
The selected option “Accept Domain Name over UDP (Queries)” means:
https://www.dumps4success.com/
A. UDP Queries will be accepted by the traffic allowed only through interfaces with external antispoofing
topology and this will be done before first explicit rule written by Administrator in a Security Policy.
B. All UDP Queries will be accepted by the traffic allowed through all interfaces and this will be done
before first explicit rule written by Administrator in a Security Policy.
C. No UDP Queries will be accepted by the traffic allowed through all interfaces and this will be done
before first explicit rule written by Administrator in a Security Policy.
D. All UDP Queries will be accepted by the traffic allowed by first explicit rule written by Administrator in
a
Security Policy.
Answer: A
Question: 10
How is communication between different Check Point components secured in R80?
A. By using IPSEC
B. By using SIC
C. By using ICA
D. By using 3DES
Answer: B
Reference: https://sc1.checkpoint.com/documents/R80/CP_R80_SecMGMT/html_frameset.htm?
topic=documents/R80/CP_R80_SecMGMT/125443
Question: 11
Identify the ports to which the Client Authentication daemon listens on by default?
A. 259, 900
B. 256, 257
C. 8080, 529
D. 80, 256
Answer: A
Reference: http://digitalcrunch.com/check-point-firewall/list-of-check-point-ports/
Question: 12
What is the purpose of the CPCA process?
A. Monitoring the status of processes
https://www.dumps4success.com/
B. Sending and receiving logs
C. Communication between GUI clients and the SmartCenter server
D. Generating and modifying certificates
Answer: D
Reference: https://supportcenter.checkpoint.com/supportcenter/portal?
eventSubmit_doGoviewsolutiondetails=&solutionid=sk97638
Question: 13
The Network Operations Center administrator needs access to Check Point Security devices mostly for
troubleshooting purposes. You do not want to give her access to the expert mode, but she still should be
able to run tcpdump. How can you achieve this requirement?
A. Add tcpdump to CLISH using add command.
Create a new access role.
Add tcpdump to the role.
Create new user with any UID and assign role to the user.
B. Add tcpdump to CLISH using add command.
Create a new access role.
Add tcpdump to the role.
Create new user with UID 0 and assign role to the user.
C. Create a new access role.
Add expert-mode access to the role.
Create new user with UID 0 and assign role to the user.
D. Create a new access role.
Add expert-mode access to the role.
Create new user with any UID and assign role to the user.
Answer: A
Question: 14
After the initial installation on Check Point appliance, you notice that the Management interface and
default gateway are incorrect. Which commands could you use to set the IP to 192.168.80.200/24 and
default gateway to 192.168.80.1.
A. set interface Mgmt ipv4-address 192.168.80.200 mask-length 24
set static-route default nexthop gateway address 192.168.80.1 on
save config
B. add interface Mgmt ipv4-address 192.168.80.200 255.255.255.0
add static-route 0.0.0.0.0.0.0.0 gw 192.168.80.1 on
save config
C. set interface Mgmt ipv4-address 192.168.80.200 255.255.255.0
add static-route 0.0.0.0.0.0.0.0 gw 192.168.80.1 on
https://www.dumps4success.com/
save config
D. add interface Mgmt ipv4-address 192.168.80.200 mask-length 24
add static-route default nexthop gateway address 192.168.80.1 on
save config
Answer: A
Question: 15
What Check Point tool is used to automatically update Check Point products for the Gaia OS?
A. Check Point INSPECT Engine
B. Check Point Upgrade Service Engine
C. Check Point Update Engine
D. Check Point Upgrade Installation Service
Answer: B
Reference:
https://sc1.checkpoint.com/documents/R77/CP_R77_Gaia_Installation_and_Upgrade_Guide/
html_frameset.htm?topic=documents/R77/CP_R77_Gaia_Installation_and_Upgrade_Guide/129978
Question: 16
You are the Check Point administrator for Alpha Corp with an R80 Check Point estate. You have received
a call by one of the management users stating that they are unable to browse the Internet with their
new tablet connected to the company Wireless. The Wireless system goes through the Check Point
Gateway. How do you review the logs to see what the problem may be?
A. Open SmartLog and connect remotely to the IP of the wireless controller
B. Open SmartView Tracker and filter the logs for the IP address of the tablet
C. Open SmartView Tracker and check all the IP logs for the tablet
D. Open SmartLog and query for the IP address of the Manager’s tablet
Answer: B
Question: 17
What are the advantages of a “shared policy” in R80?
A. Allows the administrator to share a policy between all the users identified by the Security Gateway
B. Allows the administrator to share a policy between all the administrators managing the Security
Management Server
C. Allows the administrator to share a policy so that it is available to use in another Policy Package
D. Allows the administrator to install a policy on one Security Gateway and it gets installed on another
https://www.dumps4success.com/
managed Security Gateway
Answer: C
Question: 18
Which of the following is NOT an integral part of VPN communication within a network?
A. VPN key
B. VPN community
C. VPN trust entities
D. VPN domain
Answer: A
Explanation:
VPN key (to not be confused with pre-shared key that is used for authentication).
VPN trust entities, such as a Check Point Internal Certificate Authority (ICA). The ICA is part of the Check
Point suite used for creating SIC trusted connection between Security Gateways, authenticating
administrators and third party servers. The ICA provides certificates for internal Security Gateways and
remote access clients which negotiate the VPN link.
VPN Domain - A group of computers and networks connected to a VPN tunnel by one VPN gateway that
handles encryption and protects the VPN Domain members.
VPN Community - A named collection of VPN domains, each protected by a VPN gateway.
References: http://sc1.checkpoint.com/documents/R77/CP_R77_VPN_AdminGuide/13868.htm
Question: 19
Two administrators Dave and Jon both manage R80 Management as administrators for ABC Corp. Jon
logged into the R80 Management and then shortly after Dave logged in to the same server. They are
both in the Security Policies view. From the screenshots below, why does Dave not have the rule no.6 in
his SmartConsole view even though Jon has it his in his SmartConsole view?
https://www.dumps4success.com/
A. Jon is currently editing rule no.6 but has Published part of his changes.
B. Dave is currently editing rule no.6 and has marked this rule for deletion.
C. Dave is currently editing rule no.6 and has deleted it from his Rule Base.
D. Jon is currently editing rule no.6 but has not yet Published his changes.
Answer: D
Explanation:
When an administrator logs in to the Security Management Server through SmartConsole, a new editing
session starts. The changes that the administrator makes during the session are only available to that
administrator. Other administrators see a lock icon on object and rules that are being edited. To make
changes available to all administrators, and to unlock the objects and rules that are being edited, the
administrator must publish the session.
Question: 20
Vanessa is firewall administrator in her company; her company is using Check Point firewalls on central
and remote locations, which are managed centrally by R80 Security Management Server. One central
location has an installed R77.30 Gateway on Open server. Remote location is using Check Point UTM-1
570 series appliance with R71. Which encryption is used in Secure Internal Communication (SIC)
between central management and firewall on each location?
A. On central firewall AES128 encryption is used for SIC, on Remote firewall 3DES encryption is used for
SIC.
B. On both firewalls, the same encryption is used for SIC. This is AES-GCM-256.
C. The Firewall Administrator can choose which encryption suite will be used by SIC.
D. On central firewall AES256 encryption is used for SIC, on Remote firewall AES128 encryption is used
https://www.dumps4success.com/
for SIC.
Answer: A
Explanation:
Gateways above R71 use AES128 for SIC. If one of the gateways is R71 or below, the gateways use 3DES.
Question: 21
Review the following screenshot and select the BEST answer.
A. Data Center Layer is an inline layer in the Access Control Policy.
B. By default all layers are shared with all policies.
C. If a connection is dropped in Network Layer, it will not be matched against the rules in Data Center
Layer.
D. If a connection is accepted in Network-layer, it will not be matched against the rules in Data Center
Layer.
Answer: C
Question: 22
Which of the following is NOT a SecureXL traffic flow?
A. Medium Path
https://www.dumps4success.com/
B. Accelerated Path
C. Fast Path
D. Slow Path
Answer: C
Explanation:
SecureXL is an acceleration solution that maximizes performance of the Firewall and does not
compromise security. When SecureXL is enabled on a Security Gateway, some CPU intensive operations
are processed by virtualized software instead of the Firewall kernel. The Firewall can inspect and process
connections more efficiently and accelerate throughput and connection rates. These are the SecureXL
traffic flows:
Slow path - Packets and connections that are inspected by the Firewall and are not processed by
SecureXL.
Accelerated path - Packets and connections that are offloaded to SecureXL and are not processed by the
Firewall.
Medium path - Packets that require deeper inspection cannot use the accelerated path. It is not
necessary for the Firewall to inspect these packets, they can be offloaded and do not use the slow path.
For example, packets that are inspected by IPS cannot use the accelerated path and can be offloaded to
the IPS PSL (Passive Streaming Library). SecureXL processes these packets more quickly than packets on
the slow path.
Question: 23
Which of the following Automatically Generated Rules NAT rules have the lowest implementation
priority?
A. Machine Hide NAT
B. Address Range Hide NAT
C. Network Hide NAT
D. Machine Static NAT
Answer: B,C
Explanation:
SmartDashboard organizes the automatic NAT rules in this order:
Static NAT rules for Firewall, or node (computer or server) objects
Hide NAT rules for Firewall, or node objects
Static NAT rules for network or address range objects
Hide NAT rules for network or address range objects
Question: 24
Fill in the blanks: VPN gateways authenticate using ___________ and ___________ .
A. Passwords; tokens
https://www.dumps4success.com/
B. Certificates; pre-shared secrets
C. Certificates; passwords
D. Tokens; pre-shared secrets
Answer: B
Explanation:
VPN gateways authenticate using Digital Certificates and Pre-shared secrets.
Question: 25
In R80 spoofing is defined as a method of:
A. Disguising an illegal IP address behind an authorized IP address through Port Address Translation.
B. Hiding your firewall from unauthorized users.
C. Detecting people using false or wrong authentication logins
D. Making packets appear as if they come from an authorized IP address.
Answer: D
Explanation:
IP spoofing replaces the untrusted source IP address with a fake, trusted one, to hijack connections to
your network. Attackers use IP spoofing to send malware and bots to your protected network, to execute
DoS attacks, or to gain unauthorized access.
https://www.dumps4success.com/
Thank You for trying 156-215.80 PDF Demo
To try our 156-215.80 practice exam software visit link below
https://www.dumps4success.com/156-215.80.html
Start Your 156-215.80 Preparation
20OFF
” for special 20%
[Limited Time Offer] Use Coupon “
discount on your purchase. Test your 156-215.80 preparation with
actual exam questions.
https://www.dumps4success.com/