The Power of Teranex in the palm of your hand

Transcription

The Power of Teranex in the palm of your hand
The Power of Teranex
in the palm
of your hand
Mini Features:
High Quality
Low Cost
Portable
Rack Mountable, Desktop,
Camera Mount
The new Teranex Mini ™ releases the power and “Best Picture Always” of Teranex into hand-held,
portable applications. The Mini opens up a gateway of production applications previously not achievable due to cost factors.
ry
Utilizing our Silicon Optix Realta™ chip (three years and $30 Million invested in development), Teranex
leads the industry by providing low-cost products in very small form factors, while maintaining the
renowned Teranex image quality .
mi
na
The Teranex Mini is a DTV format converter that can convert SD video to and from HD in real time with
exceptional quality. This new form factor enables applications such as HD field monitoring and conversion of SD camera and graphics sources to HD.
Pr
eli
Of importance, the Teranex Mini becomes a useful tool for the independent producer. In its most basic
form, the Mini enables SD/DV productions to be presented in HD, with resolution and clarity approaching that of native HD/HDV. For the producer that is mixing DV and HDV content into the editing
timeline, the Mini enables upconversion of the DV source to HD in real time at high enough quality
levels to effectively match the HDV content. The final product may then be delivered in both SD and
HD simultaneously by routing the SDI output back through the Mini on playout. This real-time process
not only saves time but also provides quality levels much higher than is currently available within the
editing applications.
The Teranex Mini has SD/HD SDI inputs and outputs along with optional DVI, analog component, and
HDMI outputs. It may be used equally well to feed a VTR, display, or video projector. Control is via
front panel, OSD, or RS-232. Three Minis may be mounted in a 1RU frame. A vertical clamshell mount
is also available for desktop applications.
The Teranex Mini is just the beginning for quality products in the palm of your hand!
Mini Series Applications:
l Production Trucks
l VTR Conversion and Monitoring
l SD Camera Production Upconversion
l HD Camera monitoring
l DV to HD production
l NLE ingest/playout conversion
l Large Venue Projection
Anywhere you need a high quality low cost
format converter
Rear I/O for
Mini
MINI SUPPORTS THE FOLLOWING
Mini SPECIFICATIONS
Mini-UPC-2 F
Mini-UPC-4 F
Mini-DNC-2 F
Mini-DNC-4 F
Mini-UDCS
Mini-UDCSN
Video and Audio I/O
l
Serial Digital In
Refer to the Platforms, Packages, Formats application
note for a list of formats included in each package.
Serial Digital Out
Flexview
Mini Features
DVI-I Out
(Optional)
1 x DVI-I, Digital Video Interface - Intergrated
Supports Digital and Analog Component Video
Max resolution 1920x1080 @ 60p
HDMI Out
(Optional)
1 x HDMI, High Definition Multimedia Interface
Max resolution 1920x1080 @ 60p
Control
OSD
IR
RS-232
On Screen Display
Infrared
1 x RS232, 9-Pin
Pr
e
lim
PixelMotionTM De-interlacing
l
Multi-direction Diagonal Filter (MDDFTM)
l eliminates “jaggies”
l
2-Frame/4-Frame Delay Mode
l
Per-Pixel Temporal Recursive Noise Reduction
l
Aspect Ratio Conversion
l
Flexview - Non Linear Anamorphic Aspect Ratio
l
Per-Pixel Video/Film detection & processing
l
Film mode detection including 3:2, 2:2, 2:3:3:2,
l 3:2:3:2:2, 5:5, 6:4, 8:7. etc
l
Scene Change Detection
l
Detail Enhancement
l
Embedded Audio Handling
l
l
2 x SDI (SD or HD) (BNC), 10-bit serial digital
outputs
SD at 270Mbps; Rec 601 with embedded audio
per SMPTE 272M
HD at 1.485Gbps; SMPTE 292M with embedded
audio per SMPTE 299M
ina
Flexview (available in 480i59.94 to 720p 59.94 & 1080i59.94 and
576i50 to 720p50 & 1080i50 up-conversions) is a non-linear anamorphic aspect ratio designed for use when converting 4:3 material to
16:9 without the tradition distortion of a normal anamorphic stretch.
Flexview leaves the center portion of the image untouched but
provides increasing amounts of stretch towards the edges of the
image, filling the 16:9 image without distorting the center action
area.
l
1 x SDI (SD or HD) (BNC), 10-bit serial digital
input with Loop out
SD at 270Mbps; Rec 601 with embedded audio
SMPTE 272M
HD at 1.485Gbps; SMPTE 292M with embedded
audio SMPTE 299M
ry
l
Up Converter - 2 Frame Delay
Up Converter - 4 Frame Delay
Down Converter - 2 Frame Delay
Down Converter - 4 Frame Delay
Up/Down/Cross Converter
Up/Down/Cross Converter with
Noise Reduction
Miscellaneous
Power
Temperature
Dimensions
12V DC, 15W
0oC to 50oC
1.52" H x 5" W x 8.5" D
SD/HD-SDI Out 1
SD/HD-SDI Input
Not all features are available in all configurations,
consult your Teranex Representative for specific details
l
Loop
Conversion
Noise Reduction
Aspect Ratio Conversion
Detail Enhance
Proc Amp
Audio Delay
SD/HD-SDI Out 2
DVI-I Out (Opt)
Teranex Headquarters
7800 Southland Blvd., Suite 250
Orlando, FL 32809
T 407.858.6000
F 407.858.6001
www.teranex.com
Teranex Europe
PodbielskistraBe 333
30659 Hannover, Germany
T +49.511.626.45.0
F +49.511.626.45.80
IR
Serial
HDMI Out (Opt)
A service program that
protects and enhances your
Teranex investment.
©2005 Silicon Optix
Subject to change
Mini_DS_v1i