ETI show 16 pager

www.equiptech.com
Over 25 years of quality
service to the pcb industry
WWW.EQUIPTECH.COM OVER 25 YEARS OF QUALITY SERVICE
Hitachi Router
ESI Laser Drill
Posalux Ultra Speed Drill
Pluritec Router
Excellon Uniline
Hitachi 5-Spindle Drill
Hitachi C02 Laser Drill
Piergiacomi Target Drill
Pluritec Minima Drill
Pluritec Giga Drill
Excellon 2001 LBF Drill
Pluritec Multipla Drill
Schmoll
Excellon Mark VI
Hitachi
DRILLERS
Dynamotion Single Spindle
110k rpm Air Bearing, Sieb & Meyer
Controller, Laser Broken Bit Detectors,
Diameter check, long bit check & 110
tool
ESI UV 5330 Yag Laser
Fully rebuilt with software. We are the
exclusive rebuilder of ESI laser
systems. Each drill will be factory
certified with updated software
included. All models in stock, 5200 and
5330. Software, warranty and
installation included. Call us with your
requirements.
Excellon Concept 4
CNC 7 Controller, Independent Z-Axis,
110k rpm Air Bearing Spindles, Touch
Screen Controls, 2 Available
Excellon Mark VI C, D, E & F
110k rpm Westwind Spindles, 4 & 5
Head Available, CNC 6 Controller,
Large Tool Management System,
Broken Bit Detectors, Many Available
Excellon EX 200
2 Heads, 110k rpm Air Bearing
Spindles, 9 Tool Changers per Station,
CNC 6 Controller, 2 Available
Excellon System 2001 LBF
CNC 7 Controller, 5 Heads, 125k rpm
Spindles, Tool Management System,
Broken Bit Detectors, 5 Available
Excellon System 2000
4 & 5 Head, 125k rpm Air Bearing
Spindles, CNC 7 Controller, Broken Bit
Detectors, Large Tool Management
System, 5 Available
Excellon Uniline 2000
Single Head Driller with CNC 7
Controller, 120k rpm Air Bearing
Spindle, Laser Broken Bit Detectors,
Control Depth Drilling, Large Tool
Management System, Heat Exchanger,
Air Dryer, 2 Available
Hitachi LC-1C21C/1C CO2 Blind Via
Laser Drills
Auto Load & Unload, 3 Available, 19992000
Hitachi ND5E210E
5 Stations, H-Mark 20 D Controller,
(2002), 3 Available
KlingeInberg MIC76K-6D
6-125k rpm Spindles, (2000), 10
Available
Piergiacomi Target
Single head target driller with load and
unload; Windows based controller, S/N: 37
Pluritec Giga 8888
8-125k rpm Spindles, Sieb & Meyer
Controller, Broken Bit Detectors &
Large Tool Management System,
(1999-2000), 6 Available
Pluritec Inspecta X-ray
Single Head (1997), Factory Rebuilt
with 3 Months Warranty
Pluritec Multistation
125k rpm Spindles, Sieb & Meyer
Controller, Broken Bit Detectors &
Large Tool Management System, 2
Available
Posalux Ultra Speed 6000
CNC 3000 Controller, 3 Avilable, 20012002
Posalux Multifor 25
CNC 2000 Controller, 5 - 110k rpm
Spindles, Broken Bit Detectors & Large
Tool Management System, 2 Available
1999
Schmoll XL6-21
6-125k rpm Spindles, 535mm x
650mm Work Space, (2001-2002), 6
Available
ROUTERS
Excellon/Kennard Tri-Mill
Belt Driven 40k rpm Spindles, 3 Heads,
CNC 6 controller
Hitachi NR5E210E
5 Stations, 21 x 27 inches, 50k rpm
Spindles, ATC 10, H-Mark 10 R
Controller, 1 spare spindle per machine,
(1998), 2 Available
Pluritec PND
4- 80k rpm Air Bearing Spindles, Sieb
& Meyer Controller, (2002)
DRILLERS/ROUTERS
Dynamotion Smart Drill
Driller/Router
125k rpm Air Bearing Spindle, Sieb &
Meyer Controller, Broken Bit Detectors
& Large Tool Management System,
S/N: M103
WE
Excellon EX 200 Driller/Router
2 Heads, 80k & 60k rpm Air Bearing
Spindles, 9 Tool Changers per
Station,CNC 6 Controller, 2 Available
Excellon EX 110 Driller/Router
Single Head with 80k & 60k rpm Air
Bearing Spindle, 10 Tool Pods, CNC 6
Controller, 2 Available
Excellon EX 300 Driller/Router
3 Heads, 60k rpm Spindles, 9 Tool
Changers per Station, CNC 6
Controller
BUY
★
SELL ★ TRADE
WWW.EQUIPTECH.COM OVER 25 YEARS OF QUALITY SERVICE
WWW.EQUIPTECH.COM OVER 25 YEARS OF QUALITY SERVICE
Maintech CSL 2000
Hakuto 610i CSL
Dynachem 1600IV CSL
Dynachem 724 Vacuum
Hakuto Exposure Unit
Olec AX28 Exposure Unit
Olec Accutray
Tamarack 161 Expsoure Unit
Colight UV Curer
Barco SilverWriter
ORC 7100 Optibeam
Bacher Exposure Unit
Dynachem 300 DRL
Orc 680GW
Olec Super 8 Exposure Unit
LAMINATORS
DuPont 1500 C Cutsheet
Auto Centering, Excellent Condition
(1996)
DuPont HRL-24 Hot Roll
24’’ capacity with LC 2400 cleaner unit.
Dynachem 1600-D Auto Cutsheet
Load/Unload, Auto Centering, Allen
Bradley PLC Controller, 30’’ Capacity,
S/N: 06203208 (1999)
Dynachem 1600 IV 30” Auto
Cutsheet
Automatic, Thin Panel Option (1998)
Dynachem 724 Vacuum
Rebuilt Vacuum Pump and New Seals
Hakuto Mach 500 Cutsheet
18” Automatic Cutsheet Laminator,
Auto Centering
Hakuto Mach 610i Cutsheet
24’’ Automatic Cutsheet Laminator,
Auto Centering
Maintech 2000 Cutsheet
THP-24 Pre-Heater, Windows 98
Based Controls, Touchscreen S/N:
080, (2000)
Maintech 006 Preheater
6 heated rolls, 3 independant heater
controls, 29’’ rollers, 200 volt, 3 phase
(1997)
Morton Dynachem 300 Hot Roll
Includes Model 310 Vacuum Base, 24”
Conveyor
Optek DPL 24 Vacuum
Differential Pressure, Drawer Type
Western Magnum XRL-180 Hot Roll
18”
Dynachem 300 24” Hot Roller
Dynachem 800 Preheater
EXPOSURE UNITS
Argus 7125 UV
Single-sided, 24” belt, 2-bulb
Colight DMVL-1630
8kw, Double Drawer, Air Cooled, (1997)
Colight DMVL-1330
5kw, Double Drawer, Air Cooled
Colight DMVL-1530
5kw, Double Drawer, w/Air Conditioner
Unit, CA Picard Pin Lam System, S/N:
74032600
DuPont Riston PC130
2-5kw, Double Drawer, Air Cooled
Hakuto HAP-5050C Automatic
5kw, Double-Sided, Collimated Light,
Automatic Feed, RegistrationOutput
Innerlayer Exposure, (1999), S/N: EP139
Hitech 102-S
5kw, Double Drawer with Mylar frames,
Built in Water Cooling
Hitech 106L
7kw, Double Drawer, Built in Water
Cooling, Large Format 43”x 55” Frame
Size
NuArc FT40APRNS Platemaker
Double-Sided with Digital Controls
Olec Accuprint AP-30 Super 8
8kw, Double Drawer, Built in Air
Conditioning
Olec Accuprint AP-30-5000
5kw, Double Drawer
Olec Accuprint
6kw, Double Drawer, Built in Air
Conditioning
OLEC Accutray AT30
2 Camera 6 kw Unit, 24” x 30”, (1999)
Olec Vacuum Frame Exposure
System
With Overhead, 5kw, Frame Size: 40” x
48”
ORC 680-GW
7kw, Double Drawer, Internal Cooling,
New Bulbs, New Water Jackets and
Mylar Frames, 1996-1999.
ORC 201B
3kw-5kw switchable, (1995) 2 Available
Tamarack 161C
5kw, Double Drawer, Collimated Light
Source, Auto alignment via 4-camera
system, PC based controller w/ touch
screen controls, HEPA filter
WWW.EQUIPTECH.COM OVER 25 YEARS OF QUALITY SERVICE
WWW.EQUIPTECH.COM OVER 25 YEARS OF QUALITY SERVICE
Chemcut 604
Chemcut 107i
IS Pumex
Ishii Hyoki Scrubber
Wesero Scrubber
IS Pumiflex
Burkle Roller Coater
CA DP-10
CA DP-1500
WE BUY
AND SELL
Argus LPI Spray Coater
Argus LPI Oven
I.S. Deburrer
DEBURRERS
Billco 712
Double Sided, w/High Pressure Rinse,
Heat Dryer
Ishii Hyoki Double Sided
4 Brushes with High Pressure Rinse,
Filtering System & Double Heated Dryer
Somaca WB 6224J
24’’ Double Sided Deburrer with
Oscillation, Rinse & Dryer
Chemcut 604
24’’ Conveyor, 1 Top & 1 Bottom Brush
with Rinse & Dryer. Ready to Ship From
our Warehouse.
Marseco HDDBS-2-30
2 Brushes w/ High Pressure Rinse and
Filter S/N: 045012 (1999)
Wesero
24’’ Double Sided with Rinse & Dryer
Chemcut 605
24”Conveyor, 2 Top Brushes, 2 Bottom
Brushes with Oscillation & High
Pressure Rinse
Schmid
4 Brushes, 24” Conveyor with High
Pressure Rinse and Dryer
Wesero 601
With Ultrasonics, High Pressure Rinse
& Sand Filter, S/N: M10215
I.S. Scrubber/Deburrer
4 Brushes, Automatic Brush Control,
Preclean, 5HD Dryer, (2000)
SCRUBBERS
Billco
24’’ Conveyor, 2 Brushes, Dryer
Century Pumice
24”, High Pressure Rinse, Heated
Dryer, Filtering System for Inner & Outer
Layer
Chemcut 107
24” Double Sided, 2 Brushes with
Rinse & heated Dryer
Chemcut 107i
24” Double Sided, 2 Brushes with
Rinse & heated Dryer
I. S. Pumiflex Series 2000 Pumice
24’’ Conveyor with High Pressure
Rinse, Filtrex 2000; for Inner & Outer
Layer, (1996)
I. S.
24 “ Double Scrub Complete with
rinse, dryer and Filtering System, (1998)
I.S. Pumiflex Pumice
24” with Thick Panel Option, SHD
Dryer, Filtrex 2000 Filter System and
Acid Clean Module (1996). System
Has Less Than 300 Hours! Call for
more details!
I.S. Pumex
24’’ High Pressure Rinse, SHD Dryer,
Set up for Aluminum Oxide or Pumice,
Filtrex 2000 Filter System. Ready to
Ship!!
Ishii Hyoki IDE 2000 Blind Via
Scrubber
8 Ceramic Brush Scrubbing System for
Blind Via Copper/Silver Paste, Auto
Brush Adjustment, Rinsing and Drying,
S/N: SS00029911, (1999)
Ishii Hyoki Jet
Aluminum Oxide, Includes Preclean, Jet
Scrub, High Pressure Rinse And Dryer,
Fully Rebuilt, (2000)
Marseco WSS2-24
24’’ Double Sided with 2 brushes and
rinse with dryer
Somaca SBC 224K
24’’ Double Sided with 2 Oscillating
Brushes, Rinse & Dryer
Somaca SBC 224L
24’’ Double Sided with 2 Oscillating
Brushes, Rinse & Dryer
Wesero EC600 Scrubber/Deburrer
2 Brush Unit with Back-up Rollers, Bag
Filtration, Recirculating Rinse, High
Pressure Module Option, S/N: 504,
(2000),
SCREENING & LPI
Argus LPI Spray Coater
Single-sided with conveyorized IR oven
Argus 9324 LPI Spray Coater
Double-sided with conveyorized IR
oven, (1999), Rebuilt and installed
Bassi 1.5 Tunnel Oven
Bottom Load Electric Heat
Circuit Automation DP1500 2X LPI
Screener
Double Sided, to be fully rebuilt, swing
out arms, gold screening heads
Circuit Automation DP1000 LPI
Screener
With Screen Frames and Operations
Manual (1997)
Circuit Automation DP10 LPI
Screener
Double Sided Automatic Screener
Elite Table Top Hand Screen Table
with X-Y Adjustments, Back Lighting
WWW.EQUIPTECH.COM OVER 25 YEARS OF QUALITY SERVICE
WWW.EQUIPTECH.COM OVER 25 YEARS OF QUALITY SERVICE
Schmid Clean Line
Atotech Clean Line
Atotech SES Line
Schmid SES Line
MacDermid Black Hole Line
Comac Dryer
I.S. Devmaster
I.S. SES
Chemcut 547XL-30" Developer
ABOUT ETI
Equipment Technologies Inc. (ETI) has been buying, selling, and rebuilding top-quality used PCB equipment
for the last 25 years. We take pride in our work. Our team of experts will rebuild equipment for you from start
to finish into like-new condition using manufacturers specifications or your custom requirements. Our staff has
extensive experience in international shipping, banking, documentation and customer service. We also
perform certified equipment appraisals recognized by many of the leading financial institutions thru the
Association of Machinery and Equipment Appraisers (AMEA).
ETI has 3 facilities worldwide to provide service to the pc board fabrication industry. ETI headquarters is located
in Hudson, NH, USA. To support our US west coast customers, ETI West stands ready to provide service and
sales. In addition, to support our Pacific Rim customer base, ETI China is based in Guangzhou, South China
and always ready to assist our offshore customers. For our European customers, ETI Europe is able to serve
your equipment needs.
ETI stands behind each piece of rebuilt equipment with our 100% customer satisfaction guarantee and a
complete parts and labor warranty. Our selection is the best you will find anywhere. We have over 75,000
square feet of warehouse space filled with quality equipment at our 4 different locations.
Call on ETI for any of the following services:
• equipment rebuilding
• facility liquidations
• certified AMEA equipment appraisals
• full service technical department
• installation and repair
• facility design and layout
• complete PCB facility sales
• turn-key facility and equipment
• worldwide customer support
WE
BUY
SELL
TRADE
WET PROCESS
Atotech 547XL-30” Fluid Head
Clean Line
Input, Main Chamber, Rinse, Micro
Etch, Rinse, Fluid Head Dryer & Exit
Chemcut 547XL-30” Ferric Etching
System
Input, Main Chamber, Quad Rinse
Cascade, Dryer & Exit
Hollmuller Multibond 30” Line
2m/min line in excellent condition
(2001). Print and drawings available.
Call for more information.
Atotech OSP Line
1.5 Meters per minute, (2002)
Chemcut 547XL-30” Preclean Line
Input, 48” Main Chamber, Single Rinse
Recirculating, Single Rinse, Fluid Head
Dryer & Exit
Hollmuller 24” DES Line Thin core
Transport
Single develop, dual etch and strip.
Print and drawings available
Chemcut 547XLi-30” Stripper
Input, Main Chamber, Rinse
Recirculating, Rinse, Fluid Head Dryer
with Barrel Filter System
I.S. 30” Develop-Etch-Strip Line
With Cupric Chloride Etcher, 2
meters/minute, (1999)
Brat III Table Top Etcher
With Rinse
Chemcut 547XLi-30” Clean Line
Input, Main Chamber, Rinse, Micro,
Rinse, Fluid Head Dryer & Exit
Chemcut 547XLi-30” Clean Line
ICDM: Input conveyor drive; TRSM:
Large process Micro etch or
conditioner heated and cooled;
DSM/RSM: Double recirculating rinse;
AKM: Fluid head dryer; OCM: Exit.
208/240 or 480 volts, customer choice.
Chemcut 547XL-30” Develop Line
Input, Main Chamber, Rinse Recirculating,
Rinse, Fluid Head Dryer & Exit
Chemcut 547-30” Develop Line
Input, Main Chamber, Rinse
Recirculating, Rinse, Dryer & Exit
Chemcut 547XL-20” Develop Line
Input, Main Chamber, Water Rinse & Exit
Chemcut 547-30” Etching System
Input, Main Chamber, Flood Rinse,
Rinse Recirculating, Rinse, Dryer & Exit
Chemcut 547XL-30” Etching
System
Input, Main Chamber, Flood Rinse,
Water Rinse Recirculating, Water Rinse,
Fluid Head Dryer & Exit
Chemcut 547XL-30” Stripper
Input, Main Chamber, Single Rinse
Recirculating, Rinse, Fluid Head Dryer
& Exit with Barrel Filter System
Eidschun ASI Phoenix Series 24”
Developer
Input, Main Chamber, Rinse
Recirculating, Rinse, Dryer & Exit
Eidschun ASI Ninety 25 Developer
24” Develop Line Conveyor with Input,
Main Chamber, Double Rinse, Dryer &
Exit
Eidschun ASI Phoenix Series 24”
Etching System
Input, Main Chamber, Flood Rinse,
Water Rinse Recirculating, Water Rinse,
Dryer & Exit
Eidschun ASI Phoenix Series
Stripper
Input, Main Chamber, Rinse
Recirculating, Rinse, Dryer & Exit
I.S. Devmaster 30”
Input, Double Develop Chamber, Quad
Rinse Cascade, Dryer & Exit
I.S. Devmaster 24”
Input, Main Develop Chamber, Quad
Rinse Cascade, Dryer & Exit
I.S. 30” Strip Etch Strip Line
With Stripmaster, Titanium Etchmaster,
Tin Strip complete with Thin Core
Transport Package & Fluid Head Dryer,
(1999)
I.S. Stripmaster
30”, Double Chamber with Drum Filter
System and the following modules:
Input, Double Strip, Cascade Rinses,
Dryer & Exit. (1997)
Schmid Combi-Line 24” DevelopEtch-Strip Line
Double Develop, Double Etch, Double
Strip, Inner layer, Cupric Etching, S/N:
45-98-025, 21-98-027, 46-98-083,
(1998)
Schmid Combi-Line 24” Strip-EtchStrip Line
(1998)
ETCHERS • STRIPPERS • DEVELOPERS
• CLEAN LINES • PRECLEAN LINES
• POST CLEAN LINES
WWW.EQUIPTECH.COM OVER 25 YEARS OF QUALITY SERVICE
WWW.EQUIPTECH.COM OVER 25 YEARS OF QUALITY SERVICE
ATG A3 Tester
Camtek Orion 604
Optek 924 Innervision
Luther Maelzer Tester
Mania Speedy
Orbotech AOI
Microcraft Emma
TTI Double Sided Double Density Tester
Probot 6D
Everett Charles 9090
Orbotech Blaser
Glenbrook X-Ray 2001
AOI
TESTERS
ATG A2 Flying Probe Tester
Excellent Condition! (1999)
ATG Flying A3 Probe Tester
8-Probes, (4) Upper, (4) Lower (2000)
S/N: 001000A3061
Everett Charles 9090 Bare Board
Tester
Double Sided, (1999), Grid Size: 10” x
19” , Touch Screen Controls &
Maintenance Cart, S/N: T-9090-187
Everett Charles 9090 Bare Board
Tester
Double Sided, Single Density, 19 x 25
Grid Size Top & Bottom, Touch Screen
Monitor,
(1997) Tested & Ready to Ship!!
Luther Maelzer LM100/10A Tester
(1993), S/N: 101008
Mania Cube Tester Model 3764
Single Sided, 40 Volts
Mania MPP4048/24 Tower Tester
Double Sided, Double Density, Grid
Sizes: 19.125’’ x 16’’ single density top
& bottom; 9.5’’ x16’’ double density top
& bottom. S/N: 48145293
Micro VU X-Y-Z Measuring Machine
With Video, Model: M24X18, S/N:
4443, Price $ 9,500.
Microcraft EMMA Flying Probe
Tester
(1998 - 2000) 3 Available
Optek X-Y Measuring Machine
Digital Display Printer Included
Probot Flying Probe Super 6D
Tester
4 probe tester large 24’’x 24’’ panel
size
TTI 2600 Dual Access Universal
Grid Bare Board Tester
Double sided, Double Density, Grid
Size: 12” x 14”, S/N: U10618
HOT AIR LEVELING
Argus 5124 Leveler
New Air Knives, Center Hoist, also
available lead free
Argus Precleaner 24” conveyor with
rinses
Avalon Avtec 2000 Hot Air Leveler
Excellent Condition, Vertical Hoist (1998)
Cemco HASL Horizontal Solder
Leveler
Model B consisting: preheat blower,
preheat oven (200ºC) 45º, converter
table, solder pot (inclusive of flux and
oil applicator) 45º, hover table, double
wash unit, dryer module and conveyor
to unloading station, levelling speed 1.0
to 24m/min with Abbott air receiver
Camtek Orion 604 HR AOI
(2000) Call for details!, upgraded
with software included
Camtek 2V50AR AOI
Software included, S/N: 539
(1998), 3 others available
Optek Innervision 942X X-ray
Inspection & Measurement
System
(2001) S/N: 536
Orbotech Blaser-AP AOI
Vision 300 Series V-Blaser-AP AOI
optical head laser scanner. No
software included.
Orbotech 1450 AOI
Power conditioner & control
cabinet. No software included.
Orbotech PC14 Micro AOI
Software, Ready to Ship!
(Pb & Pb Free)
Cemco Quicksilver SM Hot Air
Leveling
Tin/Lead, rebuilt heaters and solder
pump, (1998), Max. Panel Size:
Standard 2-pin fixturing 610 x 610 mm
(24” x 24”), Optional 610 x 762 mm
(24” x 30”), tooling punch available also
Lantronic TT30 Hot Air Leveler
30” x 30” panels, Pb-free, vertical hoist
Cemco Quicksilver Vertical Hot Air
Leveling System
Max. Panel Size: Standard 2-pin
fixturing 610 x 610 mm (24” x 24”),
Optional 610 x 762 mm (24” x 30”),
tooling punch available also
Teledyne HALCO 350 Hot Air
Leveler
Horizontal Hot Air Solder Leveler, cool
down table, fluxer
IS Post Washer
24” Post cleaner with 2 bristle brushed,
rinse & dryer
Teledyne HALCO 175 Hot Air
Leveler
Horizontal Hot Air Solder Leveler, cool
down table, fluxer
Avalon Avtec 4000
Vertical Hoist
WWW.EQUIPTECH.COM OVER 25 YEARS OF QUALITY SERVICE
WWW.EQUIPTECH.COM OVER 25 YEARS OF QUALITY SERVICE
OEM
Vacuum
Press
2000
TMP Vacuum Press
Burkle Vacuum Press
1999
2002
Burkle Vacuum Press
OEM Vacuum Press
OEM Vacuum Pres
2001
2001
Kuttler Loader
ESI 100 Accumulator
Lab Scope
Kuttler
Unloader
Amtech Accumulator
Nubal Accumulator
APS Plasma
B6
2001
Morton Dynachem HTC24 Cleaner
Tecknek VCM750 Tacky Roller
PRESSES
Burkle LAMV150 Hot Oil Vacuum
8-Opening, 750mm x 850mm Platens,
3 Hot Presses, 2 Cold Presses, (1999)
Burkle LAMV200 Hot Oil Vacuum
6-Opening, 750mm x 1150mm
Platens, 2 Hot Presses, Cold Press,
(2002)
Burkle LAMV200 Hot Oil Vacuum
8-Opening, 30” x 40” Platens, 2 Hot
Presses, Cold Press, Gas Fired, s/n
9144, (2002)
Incal 2-Opening 24” x 24” Vacuum
With built-in water cooling, 220 volt.
Small footprint. Great press for
prototype flex
Lauffer 6-Opening Laminating
Hot vacuum press & cool down press,
conveyors for movement of materials
and tools, lay up and breakdown
stations, storage for tools, controls,
and a caul plate cleaning machine. 6 3.75” openings with 32” x 48” steel
platens, Electric heat. (1996)
OEM 8-Opening Hot Oil Lamination
Vacuum
Model 140-400TF, w/ Model 140400TF 8-Opening, Cold Press, s/n
206-B, Applicable Manuals and
Software, Platen Size 26’’ x 32’’, with
Load and Unload, (1997). s/n 206-A.
Note: low profile
OEM Vac-Q-Lam 3-Openings
Lamination
Model: 85 2626 3 EW, 27” x 27”,
(1998) S/N: 215 V087
OEM Vac-Q-Lam 6-Opening
Lamination Vacuum
31” x 31”, electric heat with built in
water cooling, 480 volt 3 phase.
TMP 5-Opening
30’’ x 30’’, Electrically Heated Platens,
Separate Cool Down Press, 175 Ton,
Chart Recorder
TMP 6-Opening Vacuum
Oil heat, 26 x 36’’ Platen Size, Hot &
Cold all in one , 2 Zones per Platen,
Footprint 9’ x 6’ x 110’’ high,
(1997),high temp with oil boiler included
turn key system. S/N: 20542
TMP 6-Opening
30’’ x 30’’ Platens with Electric Heat,
Swing doors
MATERIAL HANDLING
Accumulators
Loaders
Conveyors & Turn
Amtech 100 Station Accumulator
Amtech Loader/Unloaders
w/50 Station Accumulators and Feed
Conveyor, 15 Available
Corema 90° Turn
Corema 100 Station Accumulator
ESI 100 Station Accumulator
Kuttler Loader
Model: KEA60, 5 Available
Nubal 50 Station Accumulator, 24”
Kuttler Loaders
Model: RLE-102A, S/N: 2475 & 2477,
(2000), 6 Available
Eidschun 50 Station Buffer
New in crate
Innerlayer Trays
Inside dimensions 26” x 29” x 3” deep,
Over 500 available, Sold in lots of 50
Kuttler Buffers
New, Never Used, 3 Available
MISCELLANEOUS
Berg 25 Ton Chiller Almost new
Concept 1000 Artwork Stabilization
Storage Cabinets
Dry Box Storage Unit
8 doors, 4 on each side with openings
of 20” wide x 26” deep, one full length
door on bottom
Dynachem Diazo Developer 24”
Hoffman 30hp Vacuum System
Hoffman 15hp Vacuum System
Nuarc Vacuum Frames
30” x 40”- Vacuum Pump
Nuarc Vacuum Frame
Model: VF-DP, 50’’ x 62’’, (1996)
Omega Meter 600 SMD
24”x24” Test Cell, Operable and Ready
to Ship!
Spencer 15hp Vacuum System
3500 rpm, 200V/3ph/60hz, S/N:
304445
Spencer 5hp Vacuum System
3470 rpm, 200V/3ph/60hz, S/N:
303665
Teknek VCM750 Tacky Roll Cleaning
Machine
30”, Vertical, 110 volt, Like New, 5
Available
Teknek 24” Tacky Roll Cleaning
Machine
Teknek Tacky Roller
Double-sided, w/ numerical counter,
anti-static bars, conveyor speed
adjustment, variable height, 110 volt, in
line application & 27’’ rollers
APS Plasma Etch
Vertical Rack, Vacuum Pump, Rebuilt
(2001)
WWW.EQUIPTECH.COM OVER 25 YEARS OF QUALITY SERVICE
WWW.EQUIPTECH.COM OVER 25 YEARS OF QUALITY SERVICE
2000
CA TC120 Oven
PAL Plating Line
Accu-Score AS-200-JM V- Score
Multiline Post Etch Punch
Cedal Bonder
1999
Filotec Jump Score 1999
2002
CA Picard Post Etch Punch
Multiline Film Punch
Cedal Auto Bonder
Shoda Techtron
S PA R E PA RT S
S PA R E PA RT S
S PA R E PA RT S
ETI Supplies Spare Parts to customers worldwide.
We:
• Stock Spare Parts
• Source Spare Parts
• Make Spare Parts
Let Our Professionals Save You 30-70% on Spare Parts
S PA R E PA RT S
S PA R E PA RT S
S PA R E PA RT S
OVENS
Bassi Thermo-Matic Tunnel 2.0
Bottom Conveyor
C-Sun Bake
Double door, stainless steel interior,
cross flow ventilaiton, electric
C-Sun Dual Chamber Cart
Stainless steel, 3 Available
Circuit Automation TC-200 Tunnel
S/N: TC200/12-003, (1996)
Circuit Automation TC-150 Tunnel
Grieve 333 Solder Mask
0 -250°F with 2 shelves
DEPINNER
Grieve 343 Solder Mask
0-350°F with 2 shelves, Cross Flow
Ventilation, New Door Seats
C.A. Picard
Hydraulic Operation, Excellent
Condition, Ready to Ship
Precision Quincy 40D-350
Solder Mask Oven, 48” x 60” x 30”
deep, Cross Flow Ventilation, New
Door Seats
PLATING
Baker Technologies Rectifiers
500 & 700 AMP Available, Multi-tap
Voltage, 190-240 Volt, 0-6 Volt Output.
Baker Technologies S-Series Power
Supply
12 available, input 190-250v, 50/60 hz,
output 500 amps.
Copper Tank
Two cell with rectifier and rinse tanks.
Great for small runs.
Eidschun Electroless Line
Automatic with flash plate, 36’ long
with rail rider hoist system. Call for
specs and details
TOOLING &
PUNCHING
HBS Electroless Line
57’ long, low Ryder hoist system
PAL Electroless Line
Available for removal in 3 months
POST ETCH PUNCH
C.A. Picard XPF-3043 Punches film or
cores of 20” x 26”, 23” x 28”, 26” x 30”,
26” x 32”; includes 2 cameras, S/N:
XPF-3043-02, (1999)
Multiline OPE
With 3000 controller, Runs on DOS,
.188 standard offset configuration
Multiline ATP-1000
Technic Copper Tin Line
8-Camera system, Series 3000
Controller, Large Panel Format,
2 Rim-runner hoists with Chemring
Standard .188 offset, S/N: ATP-1022,
Pulse Plate Rectifiers, 12 copper
staions, 3 tin, 6 – 18” x 24” per flite bar, (1997)
(1998)
FILM PUNCH
Shoda Techtron CNC V-Score
With Jump Scoring
SCORING
C.A. Picard XPF 3058SA01
S/N: 25334-000, (2001) Many film sizes
CORE PUNCH
Accu-Score Labs AS-150-JE Jump
CNC Controlled, (1998)
Filotec KSM 30 Jump Unit
With Sieb & Meyer controller (1999)
Multiline Artwork
Semi-automatic, S/N: SAP-001
Accu-score Labs AS-200-JM V
CNC Controlled, 300-FPM Feed Rate,
24” x 24”, (1999)
Gecko Automation L02RM
CNC with jump scoring
Multiline Auto Artwork
Series 3000 Controller, S/N: AAP-0060,
AAP-0063
Radoll Score-to-Break Machine
Accu-Score Labs AS-227-J Jump
CNC Controlled, (1997)
Barnaby 505 Machine
Manual
Telmec SL 13.7 Machine
Multiline Acculine
24” x 24” Format, Standard .188 Offset
Telmec SL 13.9 Machine
Jump Score Capabilities, CNC
Controller
WWW.EQUIPTECH.COM OVER 25 YEARS OF QUALITY SERVICE
YOUR GLOBAL PARTNER FOR USED PCB EQUIPMENT
ETI Europe
ETI Corporate Address:
TMT - Tec Lam
Pilgeramstrabe 3
67292 Kirchheimbolanden
Phone: +49 (0) 63 52 - 78 99 02
Fax: +49 (0) 63 52 - 78 99 04
email: thomas.michels@tmt-company.com
19 Park Avenue
Hudson, NH 03051
Tel: 603-881-5253
Fax: 603-881-5304
E-mail: info@equiptech.com
ETI West:
ETI Dongguan, China
660 California Way
Longview, WA 98632
Tel: 360-423-8466
Fax: 360-423-8701
E-mail:
west@equiptech.com
Phone: +86 (0) 769 8163 6321
Fax: +86 (0) 769 8163 6310
E-mail: kent@equiptech.com
Skype: etichina
Work In Process Hyoki
Rebuilt Hyoki
Work In
Process
Cemco
Work In Process Argus
Rebuilt
Argus
Rebuilt Cemco