PUNCHING DRILLING CUTTING DEBURRING

Transcription

Quality Tools and Machines
PUNCHING
DRILLING
CUTTING
DEBURRING
ised
v
e
r
.
3
n
Editio
21
Part B
B
Naturally also on the Internet – www.alfra.de
Made in Germany
B/2
Index
B
Drilling – Punching – Cutting – Deburring
Metal Core Drilling Machines
Page B/2 - B/29
Cutters, HSS BASIC
Page B/38 - B/41
Cutters, TCT, AL
Cutters, Rail TCT
Page B/51 - B/52
Deburring Devices/
Bevel Edge Milling Machines
Page B/79 - B/101
Machine Dimensioning
Page B/30 - B/31
Cutters, HSS-Co-Eco
Page B/42 - B/43
Cutters, TCT, suitable
for FEIN + Hitachi
Page B/53
Mills
Page B/94 - B/95
Accessories - Arbors
Page B/32 - B/33
Cutters, HSS-Co RQX
Page B/44 - B/45
RotaSpeed®
Metal Cutting Saw
RotaCut®
Mobile Band Saw Machine
Page B/54 - B/67
Deburring Machine, SKS-15 Auto
Page B/100 - B/101
Accessories Countersinking/Coolant
Page B/34
Cutters, ASP-30 Rail
Page B/46
Hydraulic Punching Units, Single Acting
Page B/68 - B/72
HSS-Bi-Metal- and TCT-Hole Saws
Page B/102 - B/119
Accessories – Tapping
Page B/35
Cutters, HSS-Co Eco, suitable
for FEIN + Hitachi
Page B/47
Hydraulic Pumps
Page B/73 + B/74 + B/75
Multi-Step Drills
Precision Conical One-Lip Bits
Page B/120 - B/124
Accessories - Chip Removers/
Pipe Retainers/Vacuum Plates
Page B/36 - B/37
Cutters, TCT, Weldon
Page B/50 - B/51
Hydraulic Punching Units, Double Acting
Page B/74
Astroflex® Sabre Saw Blades
Sabre Saw and Jigsaw Blades
Page B/125 - B/127
B/3
B/4
etence
p
m
o
C
s
’
turer
c
a
f
u
n
a
ience
M
r
e
p
x
e
x
o
30 years
Powerful Motors with high torques and a range
from 900 to 2.500W, ergonomic design, perfect
technology.
Oilbath Gear Box
Improved magnetic adhesion due to 3
instead of 2 coils.
Soft-Touch Grip
Low-vibration – with optimum secure grip (even
with oil-coated gloves).
Pressed-in brass rings for an improved protection
of the magnet coils.
Continuously adjustable motor on the slide for a
maximum stroke enlargement, when using twist
drills, drill chucks and tapping attachments.
Rota-Quick® – quick change arbor – problemfree change of cutter. The decisive advantage
compared with other quick change arbors: every
usual cutter with Weldon-shank fits.
Durable keyboard with flat cable. Panel slopingly
arranged, directly in sight of the user. To feel
for the ON/OFF-switch has come to an end. Easy
reachability of keyboard, even in narrow U-beams
and H-beams.
Newly designed gear-housing with integrated
motor support. With built-in height adjustment by
means of clamping jaws – there is no better fixing
device.
Trouble with ordinary dovetail or pillar guides?
Solid brass guide rails guarantee an optimum
slide guidance.
The heart of our Magnetic Drilling Machines:
Robust electronic switch units, interchangeable
between Model 32 – 40 – 60 – 100 and between
40 RL-E – 60 RL-E – 100 RL-E
B/5
B
ALFRA Metal Core Drilling Machines – RQ Series Overview
Made in Germany by ALFRA
page B/10
page B/12
page B/14
page B/16
Rotabest® 32 RQ
Rotabest® 40 RQ
Rotabest® 40 RL-E
Rotabest® 60 18600
18610
18611
18625
Input
1.100 Watt
1.200 Watt
1.200 Watt
1.800 Watt
Speed
rpm
450
250/450
100-250
180-450
110/175/
245/385
Full Wave Electronics/
Thermal protection
–
–
■
–
Oil-bath gear box
–
■
■
■
Motor Overload
Protection/
–
–
■
–
Right-/Left Rotation
–
–
■
–
Friction Clutch
–
–
–
■
Max. Ø of Cutter
32 mm
40 mm
40 mm
60 mm
Max. Cutting Depth
50 mm
50 mm
50 mm
50 mm
Tapping
–
M 20
M 20
M 30
Countersinking
■
■
■
■
13 mm
13 mm
16 mm
32 mm
19 mm Weldon
Rota-Quick®
quick change arbor
19 mm Weldon
Rota-Quick®
quick change arbor
MT 2
MT 3
11.000 N
rigid
16.000 N
rigid
16.000 N
rigid
20.000 N
30° swiveling
6 mm
6 mm
6 mm
10 mm
70 x 180 mm
80 x 230 mm
80 x 230 mm
80 x 230 mm
Stroke
160 mm
170 mm
170 mm
190 mm
Motor adjustable
in height
85 mm
100 mm
100 mm
60 mm
Weight
11.8 kg
16 kg
16 kg
22 kg
Type
Prod.-No
Over-Voltage Switch-Off
Twist Drills Ø max.
Arbor
Magnetic
Adhesion
Min. Material Thickness
Size of Magnet Foot
B/6
B
ALFRA Metal Core Drilling Machines – RQ Series Overview
page B/18
page B/20
page B/22
page B/24
Rotabest® 60 RL-E
Rotabest® 100
Rotabest® 100 RL-E
Rotabest® V32
18626
18635
18632
18710
1.800 Watt
2.500 Watt
1.800 Watt
900 Watt
50-110/75-175/
105-245/165-385
450
■
■
■
–
■
■
■
–
■
■
■
–
■
–
■
–
■
■
■
–
60 mm
100 mm
100 mm
32 mm
50 mm
50 mm
50 mm
25 mm
M 30
M 30 M 30
–
■
■
■
■
32 mm
32 mm
32 mm
–
MT 3
MT 3
MT 3
19 mm Weldon
20.000 N
30° swiveling
20.000 N
30° swiveling
20.000 N
30° swiveling
16.000 N
rigid
10 mm
10 mm
10 mm
6 mm
80 x 230 mm
80 x 230 mm
80 x 230 mm
95 x 200 mm
190 mm
245 mm
245 mm
45 mm
60 mm
116 mm
116 mm
–
22 kg
29 kg
28 kg
12.5 kg
50-110/75-175
105-245/165-385
165/255/365/570
B/7
B
ALFRA Metal Core Drilling Machines – Eco Series Overview
ypad
Switch ke
ad
Foil keyp
ypad
Switch ke
ad
Foil keyp
page B/26
page B/26
page B/27
page B/27
Piccolo 32/50 WD
Piccolo 32/50 WD Mini 38/50 WD
Mini 38/50 WD
18500
18501
18556
18557
Input
1.100 Watt
1.100 Watt
1.100 Watt
1.100 Watt
Speed
rpm
450
450
450
450
Full Wave Electronics/
Thermal protection
–
–
–
–
Oil-bath gear box
–
–
–
–
Motor Overload
Protection/
–
–
–
–
Right-/Left Rotation
–
–
–
–
Friction Clutch
–
–
–
–
Max. Ø of Cutter
32 mm
32 mm
38 mm
38 mm
Max. Cutting Depth
50 mm
50 mm
50 mm
50 mm
–
–
–
–
■
■
■
■
13 mm
13 mm
13 mm
13 mm
19 mm Weldon
19 mm Weldon
19 mm Weldon
19 mm Weldon
8.000 N
rigid
8.000 N
rigid
12.000 N
rigid
12.000 N
rigid
6 mm
6 mm
6 mm
6 mm
70 x 160 mm
70 x 160 mm
95 x 200 mm
95 x 200 mm
Stroke
129 mm
129 mm
141 mm
141 mm
Motor adjustable
in height
86 mm
86 mm
98 mm
98 mm
Weight
10.4 kg
10.4 kg
15.5 kg
15.5 kg
Type
Prod.-No
Over-Voltage Switch-Off
Tapping
Countersinking
Twist Drills Ø max.
Arbor
Magnetic Adhesion
Min. Material Thickness
Size of Magnet Foot
B/8
B
ALFRA Metal Core Drilling Machines – Eco Series Overview
ypad
Switch ke
ad
Foil keyp
adr
yptu
asta
h ke
itcltt
Scha
Sw
ad
Foil keyp
page B/28
page B/28
page B/29
page B/29
Mini 40/2 (HS*) WD
Mini 40/2 (HS*) WD
Junior 75/4
Junior 75/4
18520
18521
18510; (18512*)
NEW
18511 (18513*)
NEW
1.200 Watt
1.200 Watt
1.800 Watt
1.800 Watt
250/450; (430/780 rpm*)
250/450; (430/780 rpm*)
110/175/245/385
110/175/245/385
–
–
–
–
■
■
■
■
–
–
–
–
–
–
–
–
–
–
■
■
40 mm
40 mm
75 mm
75 mm
50 mm
50 mm
50 mm
50 mm
M 12
M 12
M 30
M 30
■
■
■
■
13 mm
13 mm
32 mm
32 mm
19 mm Weldon 19 mm Weldon MT 3
12.000 N
rigid
12.000 N
rigid
18.000 N
330° swiveling
18.000 N
330° swiveling
6 mm
6 mm
10 mm
10 mm
95 x 200 mm
95 x 200 mm
95 x 200 mm
95 x 200 mm
141 mm
141 mm
235 mm
235 mm
120 mm
120 mm
130 mm
130 mm
15 kg
15 kg
25 kg
25 kg
MT 3 * HS (HIGH SPEED)
B/9
B
Metal Core Drilling with
ALFRA ROTABEST
32RQ
B/10
®
B
Metal Core Drilling Machine – ALFRA Rotabest® 32 RQ
Technical data:
Core Drill:
Cutting Depth:
Twist drill:
Countersinking:
Input:
1-speed gearbox:
Tool holder:
Coolant Supply: Voltage:
Magnet adhesion:
Magnet foot:
Height Adjustable:
Stroke:
Weight:
Trouble with ordinary dovetail or
pillar guides? Solid brass guide rails
guarantee an optimum slide
guidance.
Ø 12.0 - 32.0 mm
50.0 mm
Ø 1.0 - 13.0 mm
Ø 10.0 - 40.0 mm
1.100 W
450 rpm
19.0 mm Rota-Quick®
quick change arbor
internal, automatically
230 Volt or 110 Volt (50-60 Hz)
11.000 N
70 x 180 mm (rigid)
85 mm
160 mm
11.8 kg
Left-handed? Reversible handles for
right- and left-handed operation.
Allen key misplaced? Tool pouch for
the Allen key for the motor height
adjustment fixing screws.
Ruler to check drilling depth.
Rota-Quick® quick change arbor –
easy cutter change. The decisive
advantage over other quick-change
systems: It takes all standard cutters
with Weldon shanks.
Scope of Supply:
• Metal Core Drilling Machine 32 RQ
• Transport Case
• Coolant Unit
• Drilling Spray
• Drill chuck Ø 1 - 13 mm
• Chip remover
• Safety belt
• HSS-Co Cutter Ø 18 mm
• Ejector Pin
• Operation manual
ALFRA Rotabest® Complete Set® 32 RQ
ALFRA Rotabest® Complete Set® 32 RQ
NEW – durable foil keypad with flat
cable, control panel slanted in direct
view of operator. An end to groping
for the on/off switch. Keypad easily
accessible even in narrow U-beams
and H-beams.
230 Volt
110 Volt
Prod.-No.
18600
18600.110
instead of 2 coils.
Pressed in brass rings for an improved protection of the magnet coils.
The jackscrews for the slide guidance
are no longer on the front side, but on
the back side of the panel. No danger
of injuries. Fixing device to fix the
slide on each height. For comfortable
tool-change, ideal for the machinetransport.
Motor adjustable in height on the
slide for maximum stroke enlargement when using twist drills and drill
chucks.
The heart of our Magnetic Drilling
Machines: Robust electronic switch
units, interchangeable with all types
of the new Generation.
Easy to approach for a quick service.
B/11
B
ALFRA ROTABEST
40RQ
B/12
®
B
Metal Core Drilling Machine – ALFRA Rotabest® 40 RQ
Technical data:
Core Drill:
Cutting Depth:
Twist drill:
Countersinking:
Tapping:
Input:
2-speed gearbox:
Tool holder:
Coolant Supply: Voltage:
Magnet adhesion:
Magnet foot:
Height Adjustable:
Stoke:
Weight:
Ø 12.0 - 40.0 mm
50.0 mm
Ø 1.0 - 13.0 mm
Ø 10.0 - 40.0 mm
with Tapping Attachment: M3 - M20
1.200 W
250/450 rpm
19.0 mm Rota-Quick®
quick change arbor
230 Volt or 110 Volt (50-60 Hz)
16000 N
80 x 230 mm (rigid)
100 mm
170 mm
16.0 kg
Scope of Supply:
• Metal Core Drilling Machine 40 RQ
• Transport Case
• Coolant Unit
• Drilling Spray
• Drill chuck Ø 1 - 13 mm
• Chip remover
• Safety belt
• Ejector Pin
ALFRA Rotabest® Complete Set 40 RQ
ALFRA Rotabest® Complete Set 40 RQ
guidance.
Rota-Quick® quick change arbor –
easy cutter change. The decisive
advantage over other quick-change
systems: It takes all standard cutters
with Weldon shanks.
and H-beams.
230 Volt
110 Volt
Prod.-No.
18610
18610.110
instead of 2 coils.
The jackscrews for the slide guidance
are no longer on the front side, but on
the back side of the panel. No danger
of injuries. Fixing device to fix the
slide on each height. For comfortable
tool-change, ideal for the machinetransport.
chucks.
B/13
B
ALFRA ROTABEST
®
40RL-E
■ The characteristic feature of this series is the right-/left
rotation (e. g. for threading without tapping attachment).
■ Used with threading quick-change chuck with threaded inserts.
■ Diverse applications: Drilling with twist or core drills, threading, countersinking and rubbing.
■ With control electronics for optimal speeds.
■ Robust – precise – versatile.
B/14
Tapping attachment is not included in scope of supply.
B
Metal Core Drilling Machine – ALFRA Rotabest® 40 RL-E
Technical data:
Core Drill:
Cutting Depth:
Twist Drill:
Tapping:
Countersinking:
Motor:
Input:
2-speed gear:
1. speed
2. speed
Arbor:
Coolant Supply:
Full Wave Electronics:
Thermal protection:
Torque Cutoff:
Height Adjustable:
Stoke:
Voltage:
Magnet adhesion:
Magnet foot:
Weight:
Ø 12.0 - 40.0 mm
50.0 mm
Ø 1.0 up to 16.0 mm
with MT 2 quick-clamp drill chuck
up to Ø 20.0 mm
with MT 2 DIN 345 direct insertion
with Tap Collets: M3 - M14
with Tapping Attachment: M3 - M20
Ø 40.0 mm
1.200 W
right/left
100 - 250 rpm
180 - 450 rpm
MT 2
via Tool Holder
serial
serial
serial
100 mm
170 mm
230 Volt or 110 Volt (50-60 Hz)
16000 N
80 x 230 mm (rigid)
16.0 kg
and H-beams.
Plus: motor control for right-/left
rotation.
instead of 2 coils.
Scope of Supply:
• Metal Core Drilling Machine 40 RL-E
• Transport Case
• Coolant Unit
• Drilling Spray
• Quick-clamp drill chuck 1 to 16 mm, MT 2
• Chip remover
• Safety belt
ALFRA Rotabest® Complete Set 40 RL-E
guidance.
230 Volt
110 Volt
Prod.-No.
18611
18611.110
Especially well-suited to problemsolving and fast threading.
chucks.
B/15
B
ALFRA ROTABEST
60
B/16
Arbor is not included in scope of supply.
®
Metal Core Drilling Machine – ALFRA Rotabest® 60
B
Technical data:
Core Drill:
Cutting depth:
Twist drill:
Countersinking:
Tapping:
Input:
4-speed gearbox:
Arbor:
Voltage:
Magnetic adhesion:
Magnet Foot:
Height Adjustable:
Stroke:
Weight:
Ø 12.0 - 60.0 mm
50.0/110.0 mm
Ø 1.0 - 16.0 mm with drill chuck
up to Ø 32.0 with Morse Taper
Ø 10.0 - 55.0 mm
up to M30 with Tapping Attachment
1.800 W
110/175/245/385 rpm
MT3
230 Volt or 110 Volt (50-60 Hz)
20000 N
80 x 230 mm, 30° adjustable right/left
10 mm back/forwards
60 mm
190 mm
22.0 kg
Scope of Supply:
• Metal Core Drilling Machine 60
• Transport Case
• Coolant Unit
• Chip remover
• Safety belt
• Drilling Spray
ALFRA Rotabest® Complete Set 60
guidance.
and H-beams.
instead of 2 coils.
230 Volt
110 Volt
Prod.-No.
18625
18625.110
Adjustable Magnet Foot for better
positioning. 10 mm back/forwards.
15° right/left .
chucks.
B/17
B
ALFRA ROTABEST
®
60RL-E
■This machine has the same features as model 40 RL-E
for drilling – threading (M3 to M30) – countersinking
up to Ø 55 mm or rubbing
■ Even more powerful and robust with the greatest magnetic adhesion for your safety.
■ The magnet foot can be pivote 30° right and left and
can be adjusted 10 mm forwards and backwards.
■ This means the greatest possible flexibility for
positioning:
- setting the machine
- securing with magnet
- and then precise positioning.
■ Motor height adjustable for greatest possible stroke,
especially for use with MT twist drills, tap collets and
extra-long cutters.
B/18
B
Technical data:
Core Drill:
Cutter, extra long 110 mm:
Cutting depth:
Twist drill:
Tapping:
Countersinking:
Motor:
Input:
4-speed gearbox:
Tool holder:
Coolant Supply:
Full Wave Electronics:
Thermal protection:
Torque Cutoff:
Voltage:
Magnetic adhesion:
Magnet Foot:
Height Adjustable:
Stroke:
Weight:
Ø 12.0 - 60.0 mm
Ø 20.0 - 50.0 mm
50.0/110.0 mm
up to Ø 32 mm with Morse Taper DIN 345
with Tap Collets: up to M30
with Tapping Attachment: up to M30
Ø 10 - 55.0 mm
1.800 W
right/left
1. speed 50 - 110 rpm
2. speed 75 - 175 rpm
3. speed 105 - 245 rpm
4. speed 165 - 385 rpm
MT 3
via Tool Holder
serial
serial
serial
230 Volt or 110 Volt (50-60 Hz)
20000 N
80 x 230 mm, 30° adjustable right/
left, 10 mm back/forwards
60 mm
190 mm
22.0 kg
guidance.
and H-beams.
rotation.
instead of 2 coils.
Scope of Supply:
• Transport Case
• Coolant Unit
• Drilling Spray
• Quick-clamp drill chuck 1 to 16 mm, MT 3
• Chip remover
• Safety belt
230 Volt
110 Volt
Prod.-No.
18626
18626.110
chucks.
B/19
B
ALFRA ROTABEST
®
100
B/20
Metal Core Drilling Machine – ALFRA Rotabest® 100
B
Technical Data 100:
Core Drill:
Cutting Depth:
Twist drill:
Countersinking:
Tapping:
Input:
4-speed gearbox:
Tool holder:
Voltage:
Magnetic adhesion:
Magnet Foot:
Height Adjustable:
Stroke:
Weight:
Ø 12.0 - 100.0 mm
50.0 mm/110 mm
up to Ø 32.0 mm with Morse Taper
Ø 10.0 - 55.0 mm
2.500 W
165/255/365/570 rpm
MT 3
230 Volt or 110 Volt (50-60 Hz)
20000 N
10 mm back/forwards
116 mm
245 mm
29.0 kg
guidance.
and H-beams.
instead of 2 coils.
Scope of Supply:
• Metal Core Drilling Machine 100
• Transport Case
• Coolant Unit
• Chip remover
• Safety belt
• Drilling Spray
2500 W
2500 W
230 Volt
110 Volt
Prod.-No.
15° right/left .
18635
18635.110
chucks.
B/21
B
ALFRA ROTABEST
®
100 RL-E
B/22
B
Technical Data 100 RL-E:
Core Drill:
Cutting Depth:
Twist drill:
Countersinking:
Tapping:
Input:
4-speed gearbox:
Tool holder:
Voltage:
Magnetic adhesion:
Magnet Foot:
Stroke:
Weight:
Ø 12.0 - 100.0 mm
50.0 mm/110 mm
up to Ø 32.0 mm with Morse Taper
Ø 10.0 - 55.0 mm
with Tap Collets: up to M30
with Tapping Attachment: up to M30
1.800 W
right/left
1. speed 50 - 110 rpm
2. speed 75 - 175 rpm
3. speed 105 - 245 rpm
4. speed 165 - 385 rpm
MT 3
230 Volt or 110 Volt (50-60 Hz)
20000 N
10 mm back/forwards
245 mm
28.0 kg
Scope of Supply:
• Transport Case
• Coolant Unit
• Chip remover
• Safety belt
• Drilling Spray
• Quick-clamp drill chuck
guidance.
and H-beams.
rotation.
instead of 2 coils.
230 Volt
110 Volt
Prod.-No.
18632
18632.110
15° right/left .
chucks.
B/23
B
ALFRA ROTABEST
®
V32
B/24
B
Angular Metal Core Drilling Machine – ALFRA Rotabest® V32
■ Horizontal metal core drilling machine for the tightest
conditions. Perfect for use where regular metal core drilling machines cannot go due to their height.
■Application areas:
Steel construction (in between girder flanges), vehicle
construction (truck frames), bridge construction, tower
construction, tunnel construction, tersely everywhere,
where it´s narrow ...
Suitable for the tightest
spaces, wherever it is tight.
■The total height is just 227 mm and can even be reduced
to 185 mm by removing the handle.
■The spur gear unit is designed for robust use and is fed
using a ratchet leveler.
Reversible for right- and left-handed operation.
■Another advantage: the design of the angled gear unit
ensures permanent lubrication and prevents dry running.
Fed using ratchet leveler, reversible
for right- and left-handed operation
■ Used with the proven motors and
magnet foot components from the Rotabest® series.
Technical data:
Spur gear unit for robust application
Core Drill:
Cutting Depth:
Countersinking:
Ø 12.0 - 32.0 mm
25 mm
Ø 10.0 - 32.0 mm
Input:
1-speed gearbox:
Tool Holder:
Cooling:
Voltage:
Magnet Foot:
Magnet adhesion:
Height:
Power cord:
Weight:
900 W
450 rpm
19 mm Weldon
internal, automatically through the spindle
the spindle
230 Volt or 110 Volt (50-60 Hz)
95 x 200 mm (rigid)
16000 N
227/185 mm
3.0 m
12.5 kg
Good view from operator position
to drill
Robust rack guides
Scope of Supply:
•
•
•
•
•
•
•
•
Angular Metal Core Drilling Machine V 32
Coolant unit with hose and nipple
transport case
Allen key for Weldon arbor
safety belt
HSS Co Cutter Ø 18 mm, cutting depth 25 mm
Ejector pin 6.35 x 70 mm (specifically for Rotabest® V32)
Operation manual
ALFRA Rotabest® Complete Set V32
ALFRA Rotabest® Complete Set V32
230 Volt
110 Volt
Easy to use:
Magnet on – Motor on/off
Prod.-No.
18710
18710.110
B/25
B
Metal Core Drilling Machine – ALFRA Rotabest®
Piccolo 32/50 Weldon
eypad
Switch k
Prod.-No. 18501
Technical data:
Core Drill:
Cutting Depth:
Twist Drill:
Countersinking:
Input:
1-speed gearbox:
Tool Holder: Coolant Supply: Height Adjustable:
Stroke:
Voltage:
Magnet adhesion:
Magnet Foot: Magnet Foot Assembly:
Weight:
ad
Foil keyp
Ø 12.0 - 32.0 mm
50.0 mm
Ø 1.0 - 13.0 mm DIN 338
Ø 10.0 - 40.0 mm
1.100 W
450 rpm
19 mm Weldon shank
86 mm
129 mm
230 Volt or 110 Volt (50-60 Hz)
8.000 N
70 x 160 m
rigid
10.4 kg
Prod.-No. 18500
Scope of Supply:
• Metal Core Drilling Machine
Piccolo 32/50 Weldon
• Plastic transport case
• Safety belt
• Coolant Unit
ALFRA Rotabest® Complete Set Piccolo 32/50 WD
B/26
Weldon held directly in the motor
spindle. No tool holder necessary.
Ensures the highest concentricity.
230 Volt
110 Volt
230 Volt
110 Volt
Prod.-No.
18500
18500.110
18501
18501.110
chucks.
Solid brass guide rails guarantee an
optimum slide guidance.
B
Mini 38/50 Weldon
eypad
Switch k
Prod.-No. 18557
Technical data:
Core Drill:
Cutting Depth:
Twist Drill:
Countersinking:
Input:
1-speed gearbox:
Tool Holder: Coolant Supply: Height Adjustable:
Stroke:
Voltage:
Magnet adhesion:
Weight:
ad
Foil keyp
Ø 12.0 - 38.0 mm
50.0 mm
Ø 1.0 - 13.0 mm DIN 338
Ø 10.0 - 40.0 mm
1.100 W
450 rpm
19 mm Weldon shank
98 mm
141 mm
230 Volt or 110 Volt (50-60 Hz)
12.000 N
95 x 200 mm
rigid
15.5 kg
Prod.-No. 18556
Scope of Supply:
Mini 38/50 Weldon
• Safety belt
• Coolant Unit
ALFRA Rotabest® Complete Set Mini 38/50 WD
ALFRA Rotabest® Complete Set Mini 38/50 WD ALFRA Rotabest® Complete Set Mini 38/50 WD ALFRA Rotabest® Complete Set Mini 38/50 WD Weldon held directly in the motor
230 Volt
110 Volt
230 Volt
110 Volt
Prod.-No.
18556
18556.110
18557
18557.110
chucks.
Solid brass guide rails guarantee an
optimum slide guidance.
B/27
B
Mini 40/2 Weldon
Mini 40/2 HS Weldon
NEW
NEW
eypad
Switch k
Prod.-No. 18511
Technical data:
Core Drill:
Cutting Depth:
Twist drill:
Countersinking:
Tapping:
Input:
2-speed gearbox:
Arbor:
Coolant Supply: Height Adjustable:
Stroke:
Voltage:
Magnet adhesion:
Weight:
Type HS
Prod.-No. 18513
Ø 12.0 - 40.0 mm
50.0 mm
Ø 1.0 - 13.0 mm
Ø 10.0 - 40.0 mm
1.200 W
250/450 rpm; 430/780 rpm (Type HS)
19 mm Weldon Direct Arbor
120 mm
141 mm
230 Volt or 110 Volt (50-60 Hz)
12.000 N
95 x 200 mm
rigid
15.0 kg
Scope of Supply:
Rotabest® mini 40/2
• Quick-clamp drill chuck
• Ejector Pin
• Coolant Spray ALFRA 4000
• Coolant unit
ALFRA Rotabest® Complete Set
B/28
d
a
Foil keyp
Prod.-No. 18510
Type HS
Prod.-No. 18512
Type HS (HIGH SPEED) Weldon is qualified for the use of TCT Cutters.
ALFRA Rotabest®
ALFRA Rotabest®
ALFRA Rotabest®
ALFRA Rotabest®
Prod. No.
Complete Set
Complete Set
Complete Set
Complete Set
Mini 40/2 HS WD 230 Volt
18512
18512.110
18513
18513.110
Prod. No.
Mini 40/2 WD Mini 40/2 WD Mini 40/2 WD Mini 40/2 WD 230 Volt
110 Volt
230 Volt
110 Volt
18510
18510.110
18511
18511.110
Weldon held directly in the motor
B
Junior 75/4
eypad
Switch k
Technical data:
Core Drill:
Cutting Depth:
Twist Drill:
Tap
Countersinking:
Input:
4-speed gearbox: Tool Holder:
Coolant Supply:
Height Adjustable:
Stroke:
Voltage:
Magnet adhesion:
Magnet Foot: Weight:
Prod.-No. 18521
ad
Foil keyp
Ø 12.0 - 75.0 mm
50.0 mm
Ø 32.0 mm
with tapping attachment: up to M30
Ø 10.0 - 55.0 mm
1.800 W
110/175/245/385 rpm.
MT 3
via Tool Holder
130 mm
235 mm
230 Volt or 110 Volt (50-60 Hz)
18.000 N
95 x 200 mm, movable 10 mm back and forth,
330° to both sides
25.0 kg
Prod.-No. 18520
Scope of Supply:
Rotabest® Junior 75/4
• Transport case
• Safety belt
• Coolant Unit
Junior 75/4 Junior 75/4 Junior 75/4 Junior 75/4 Arbor is not included in scope of supply.
230 Volt
110 Volt
230 Volt
110 Volt
Prod.-No.
18520
18520.110
18521
18521.110
B/29
B
Machine Dimensions – ALFRA Rotabest®
32 RQ
40 RQ + 40 RL-E
60 + 60 RL-E
100 + 100 RL-E
V 32
Piccolo 32/50 WD
B/30
Machine Dimensions – ALFRA Rotabest®
Mini 38/50 WD
B
Mini 40/2 WD
Junior 75/4
B/31
B
Accessories – Arbors
Description Prod.-No. 32 RQ
40 RQ
40 RL-E
Piccolo 32/50WD Mini 38/50WD
Mini 38/50WD
60 60 RL-E
Junior 75/4
100
100 RL-E
RQ
Drill chuck with Weldon shank for twist drills
Ø 1 -13 mm
18107
■
■
Quick-clamp drill chuck with Morse Taper 2 for twist drills
Ø 1 - 16 mm
18008
40 RL-E
Quick-clamp drill Chuck with Morse Taper 3 for twist drillsᅠ Ø 1 - 16 mm
18009
Tool Holder AMT-2 – Morse Taper 2 for core drills
with Weldon shank
Ø 12 - 60 mm
with automatic internal cooling – suitable for all machines with drill spindle MT 2
18003
40 RL-E
■
Tool Holder AMT-2 Morse Taper 2 without internal film cooling
18001
40 RL-E
Sleeve for Tapping Attachment MT 3/2
18023
Tool Holder AMT-3 Morse Taper 3 without internal film cooling
18002
■
■
Tool Holder AMT-3 – Morse Taper 3 for core drills
with Weldon shank
Ø 12 - 60 mm
without internal cooling –
suitable for all machines with drill spindle MT 3
18025
■
■
Tool Holder AMT-3 – elongated design
Morse Taper 3 for core drills with Weldon shank
Ø 12 - 50 mm, Cutting Depth 110 mm
with automatic internal cooling –
18025L
■
■
Tool Holder AL3 - Morse Taper 3 for cutters strong construction
Ø 51 - 100 mm, with keyway with automatic internal cooling
20230
■
■
Quick Change Tool Holder Rota-Quick®
Morse Taper 2
with automatic internal cooling
suitable for all machines with MT 2 arbor
Application area: max. Ø 40 mm core drills
18650
40 RL-E
■
Quick Change Tool Holder Rota-Quick®
Morse taper 3
with automatic internal cooling –
Application area: max. Ø 40 mm core drills
18651
Prod.-No. 18107
■
■
■
■
With
Prod.-No. 18008/18009
Reducing Sleeve
MT 3/2
■
■
■
■
With
With
Reducing Sleeve Reducing Sleeve
MT 3/2
Prod.-No. 18003/18025
MT 3/2
■
■
With
With
MT 3/2
MT 3/2
■
■
Prod.-No. 18001/18002
Prod.-No. 18023
Prod.-No. 18025L
Prod.-No. 20230
■
■
With
With
MT 3/2
MT 3/2
■
■
Prod.-No. 18650 + 18651
B/32
B
Accessories – Adaptors
n You use FEIN Magnet Drilling Machines?
n You do not want to do without ALFRA Rotabest® Cutters?
n No Problem – we have the suitable adaptors
Adaptor with internal thread M18 x 6P 1.5
Adaptor for the use of Rotabest® HSS-Co-Eco and HSS-Co
RQX cutters from Ø 12 to 32.0 mm and Rotabest TCT cutters
from Ø 14.0 to 32.0 mm on: FEIN Core Drilling Machines
Type KBM 542
20201
20202
Ejector pin to fit Prod.-No. 20202 – separate
20203
Adaptor
Adaptor for the use of all cutters with Weldon shank on
Fein Quick IN quick change system.
20204
FEIN/Hitachi
M18 x 6P 1.5
Internal Thread
Weldon
This adaptor is unnecessary when using our HSS Eco cutters
in series Prod. No. 1909... and 2009...
Extension Adaptor
with Weldon shank and ejector pin.
Weldon
Prod.-No. 20201
Adaptor with external thread (inc. ejector pin)
Adaptor for use of Fein cutters with internal thread
M18 x 6P 1.5 on Metal Core Drilling Machines with Weldon shank.
Ejector pin for HSS cutter, Cutting depth 25 mm
Ejector pin for HSS cutter, Cutting depth 50 mm
FEIN/Hitachi
M18 x 6P 1.5
Internal Thread
Prod.-No.
Prod.-No. 20202
Weldon
1950500
1975500
FEIN-Quick IN
Prod.-No. 20204
20206
For the use of cutters 25 – 35 – 50 mm cutting depth in
cases when the surface of the material to be drilled is lower
than the support surface of the machine. The first ejector pin
releases the second ejector pin, the coolant flows through
the hole to the cutter.
Total length of Adaptor: 80 mm
Diameter:
30 mm
Ejector pin:
6.35 x 77 mm, Prod.-No. 1926500
Prod.-No. 20206
FEIN-Quick IN
Adaptor cpl. with ejector pin+ Allen key
Adaptor for the use of cutters with FEIN Quick IN shank on
Metal Core Drilling Machines with Weldon tool holder.
20210
Replacement ejector pin (for adaptor only) 6.35 x 125 mm
1936501
Weldon
NEW
Prod.-No. 20210
Adaptor for TCT Hole Saws, type MBS
on Metal Core Drilling Machines with Weldon tool holder
(incl. ejector pin Prod. No. 1950500
060WD
NEW
Prod. No. 060WD
B/33
B
Accessories – Countersinking/Coolant
For all types
Description Prod.-No. 32 RQ
40 RQ
40 RL-E
Piccolo 32/50WD Mini 38/50WD
HSS Countersink and Deburrer with Weldon shank
Ø 25 mm
18533 ■
■
60 60 RL-E
Junior 75/4
100
100 RL-E
■
■
With
With
Tool Holder
Tool Holder
18003/18025
18003/18025
18650+18651
18650+18651
■
■
■
■
With
With
Tool Holder
Tool Holder
Prod.-No. 18533
Ø 30 mm
18536 18003/18025
18003/18025
18650+18651
18650+18651
18534
■
■
■
■
With
With
Ø 40 mm
Tool Holder
Tool Holder
18003/18025
18003/18025
18650+18651
18650+18651
Ø 55 mm
18537 ■
■
Coolant unit, complete (see illustration)
18104
■
■
■
■
Prod.-No. 18104
Coolant unit with hose and nipple 0.5 litre
for Rotabest® V32
18103
Prod.-No. 18103
ALFRA Bio 2000 Cutting and Drilling Spray
Sprayer 405 ml
21010
■
■
■
■
ALFRA 4000
High Performance Cutting Oil Spray
Sprayer 300 ml
21040
■
■
■
■
High-performance wax pin
Ideal for vertical and overhead core drillings
as paste sticks to the cutter.
09011
■
■
■
■
Prod.-No. 21010, 21040, 09011
B/34
B
Accessories – Tapping
For all types
Description Shank
Tapping Attachment M3 - M12
MT2 + RotaQuick®
Scope of supply:
with Rota-Quick®- shank and MT2, interchangeable, plastic case, manual book
Prod.-No. 18652
Tapping Attachment M10 - M20
MT2 + RotaQuick®
Scope of supply:
with Rota-Quick®- shank and MT2, interchangeable, plastic case, manual book
18653
Sleeve for Tapping Attachment
18023
Tap Collets with Quick Change Inserts for Rotabest® RL-E,
models with right/left rotation.
18660
Tapping Set Size 2 In wooden case
consisting of:
Quick Change Tapping Adaptor Size 2 MT 3
1pc. each of Tap Collet Size 2
M6 – M8 – M10 – M12 – M14 – M16 – M18 – M20 – M22
18680
Quick Change Tapping Adaptor Size 1 MT 2, separate
18661
Quick Change Tapping Adaptor Size 2 MT 3, separate
18681
Shank-Ø
M3
3.5
M4
4.5
M5
6.0
M6
6.0
M8
8.0
M10
10.0
M12
9.0
M14
11.0
Size
Size
Size
Size
Size
Size
Size
Size
Size
2
2
2
2
2
2
2
2
2
M6
M8
M10
M12
M14
M16
M18
M20
M22
6.0
8.0
10.0
9.0
11.0
12.0
14.0
16.0
18.0
MT 3/2 MT 3/2 MT 3/2
■
■ ■ ■
with with with
reducing sleeve reducing sleeve reducing sleeve MT 3/2 MT 3/2 MT 3/2
Prod.-No. 18652 + 18653
Prod.-No. 18680
Prod.-No. 18682 (M6)
Tap Collets with clutch
1
1
1
1
1
1
1
1
Prod.-No. 18023
Tapping Set Size 1 in wooden case
consisting of:
Quick Change Tapping Adaptor Size 1 MT 2
1pc. each of Tap Collet Size 1
M3 – M4 – M5 – M6 – M8 – M10 – M12 – M14
Size
Size
Size
Size
Size
Size
Size
Size
40 RQ
60 75/4
100
Mini 40/2
■
■ ■ ■
with with with
reducing sleeve reducing sleeve reducing sleeve
Square
2.7
3.4
4.9
4.9
6.2
8.0
7.0
9.0
Tap
DIN 371
DIN 371
DIN 371
DIN 371
DIN 371
DIN 371
DIN 376
DIN 376
18662
18663
18664
18678
18665
18666
18667
18668
4.9
6.2
8.0
7.0
9.0
9.0
11.0
12.0
14.5
DIN 371
DIN 371
DIN 371
DIN 376
DIN 376
DIN 376
DIN 376
DIN 376
DIN 376
18682
18683
18684
18685
18686
18687
18688
18689
18690
Prod.-No. 18681
Prod.-No. 18681 – Assembly Note
B/35
B
ALFRA – Magnetic Chip Remover
In a stainless steel round rod, you can move a magnet
back and forth. The strong magnet picks up metal chips –
pull a knob and the chips fall off. For more cleanliness in the work place.
Prod.-No.
ALFRA Magnetic Chip Remover, Length 400 mm
18654
Prod.-No. 18654
B/36
Accessories – Mechanical Clamping Devices for Pipes
B
For all types
Description Prod.-No.
"When all hell is let loose" on site - or in the workshop!
Our mechanical attachment for clamping pipes with tension chains enables the use of Magnetic Core Drilling Machines on pipes from Ø 80 mm.
The adjustment is carried out by means of clamping jaws.
For pipes of various Ø.
Attachment for Clamping Pipes with 1 tension chain Ø 80 - 300 mm
Base plate for magnet foot 100 x 235 mm, Weight 7.5 kg
18019
Attachment for Clamping Pipes with 2 tension chains Ø 80 - 900 mm
Base plate for magnet foot 100 x 280 mm, Weight 12 kg
18020
Attachment for Clamping Pipes with tension belt Ø 80 - 900 mm
Base plate for magnet foot 100 x 235 mm, Weight 6.5 kg
18021
Prod.-No. 18019
Tension range with double tension belt up to 2000 mm pipe Ø
on request Prod.-No. 18022
Prod.-No. 18020
Prod.-No. 18021
Accessories – Vacubest Vacuum Attachment
For all types
Description Prod.-No.
Vacuum Attachment Vacubest
18150
Use on non-magnetic surfaces such as aluminium, copper,
brass, stainless steel, plastics, structured materials
(e.g. bulb or checker plate)
Vacuum capacity: 1.5 m3/h - 25 l/min.
Max vacuum: 200 mbar (abs)
Overpressure: 300 mbar
Dimension of vacuum plate: 400 x 200 mm
Scope of Supply:
Pump (230 V, 50Hz), vacuum plate, vacuum hose 3m
TIP:
Please explain operation range (problems).
We are pleased to advice.
Vacuum plate
Pump
B/37
►►HSS-BASIC
►►HSS-CO-Eco
►►HSS-CO RQX coated
►►ASP-30 RAIL
B/38
Advantages of ALFRA ROTABEST® Cutters
Design Advantages
Specially designed cutting geometry
■ Immediate centering
■ No running off center
■ Good concentricity
■ Suitable for NC and CNC machines
Design
Advantages
Optimum regular chip break
■ Smooth cutting
■ Excellent cutting capacity
■ Good chip production at each tooth
■ Regular chip flow
Design
Advantages
Minimum cross section of chip removing
surface
■ Easy cutting
■ Low torque
■ Minimum demand for energy
Design
Advantages
High tooth hardness due to optimum raw
material and special heat treatment
■ Long tool life
■ Also suitable for material difficult to cut
Design
High toughness of cutter, specially graduated hardness
Advantages ■ Low risk of tool break, especially under
rough working conditions
Industrial scale manufacturing by
state-of-the-art CNC technology
■ Best reproducibility
■ Constant quality
Internal Bore for ejector pin
+ coolant supply
Optimized
wall thickness
Conical Grinding
usable cutting
depth
Optimized tooth shape
with pre- and Post-cutter
B/39
B
ALFRA Rotabest® – HSS BASIC Cutters
With Weldon shank 19.0 mm
n
n
n
n
With Weldon shank 19.0 mm,
2 clamping surfaces, 1 Countersinking for RotaQuick®
Internal bore: 6.35 mm
Steel quality: Special high-capacity speed steel
Ground section: high performance toothing with pre- and post cutter
Ø in mm
Cutting Depth:
12.0
13.0
13.5
14.0
15.0
15.5
16.0
17.0
17.5
18.0
19.0
19.5
20.0
21.0
22.0
23.0
24.0
25.0
26.0
26.5
27.0
28.0
29.0
30.0
31.0
32.0
33.0
34.0
35.0
36.0
37.0
38.0
39.0
40.0
41.0
42.0
43.0
44.0
45.0
46.0
47.0
48.0
49.0
50.0
51.0
52.0
53.0
54.0
55.0
56.0
57.0
58.0
59.0
60.0
Ejector Pin
Dimension mm:
B/40
Prod.-No
25 mm
1907012025
1907013025
1907013525
1907014025
1907015025
1907015525
1907016025
1907017025
1907017525
1907018025
1907019025
1907019525
1907020025
1907021025
1907022025
1907023025
1907024025
1907025025
1907026025
1907026525
1907027025
1907028025
1907029025
1907030025
1907031025
1907032025
1907033025
1907034025
1907035025
1907036025
1907037025
1907038025
1907039025
1907040025
1907041025
1907042025
1907043025
1907044025
1907045025
1907046025
1907047025
1907048025
1907049025
1907050025
–
1907052025
–
–
1907055025
–
–
–
–
1907060025
Prod.-No.
50 mm
1907012050
1907013050
1907013550
1907014050
1907015050
1907015550
1907016050
1907017050
1907017550
1907018050
1907019050
1907019550
1907020050
1907021050
1907022050
1907023050
1907024050
1907025050
1907026050
1907026550
1907027050
1907028050
1907029050
1907030050
1907031050
1907032050
1907033050
1907034050
1907035050
1907036050
1907037050
1907038050
1907039050
1907040050
1907041050
1907042050
1907043050
1907044050
1907045050
1907046050
1907047050
1907048050
1907049050
1907050050
1907051050
1907052050
1907053050
1907054050
1907055050
1907056050
1907057050
1907058050
1907059050
1907060050
1926500
6.35 x 77
1950500
6.35 x 102
Dimensions in inches available upon request.
suitable for:
ALFRA-Rotabest® (Weldon), ALFRA-RotaQuick® quick change system,
BDS, Bux, Ruko, Magnetor, Euroboor, Universal, Nitto, Jancy, Hougen,
Magtron, Promac, Rotabroach and as well as for all types of magnetic
drilling machines with Weldon shank.
ions in
Dimens ilable
ava
inches quest
upon re
Countersinking for RotaQuick®
Weldon
1
2
High performance toothing with pre- (1) and post
(2) cutter
ALFRA Rotabest® – HSS BASIC Cutter Sets
B
n An assortment of the most popular sizes of cutters clearly presented in
a solid plastic case.
n Absolute protection of the teeth even in rough applications on the spot
and in the workshop.
n We can manufacture your individual sets from Ø 12.0 to 30.0 mm on
request.
HSS BASIC Cutter Set
Cutting Depth 25 mm
Prod.-No.
1907003025
6 pc. Cutter Set:
with 1 ea. of Ø 12.0 - 14.0 - 16.0 - 18.0 - 20.0 - 22.0 mm
in solid plastic case
incl. 1 ejector pin Prod.-No. 1926500
Cutting Depth 25 mm
ions in
Dimens ilable
ava
inches quest
upon re
Prod.-No. 1907003025
Prod.-No.
1907001025
10 pc. Cutter Set:
with Ø 2 x 12.0 - 2 x 14.0 - 1 x 16.0 - 2 x 18.0 - 1 x 20.0 - 2 x 22.0 mm
incl. 2 ejector pins Prod.-No. 1926500
Cutting Depth 50 mm
Prod.-No.
1907003050
Prod.-No. 1907001025
6 pc. Cutter Set:
with 1 ea. of Ø 14.0 - 16.0 - 18.0 - 20.0 - 22.0 - 26.0 mm
Cutting Depth 50 mm
Prod.-No.
1907001050
10 pc. Cutter Set:
with Ø 2 x 14.0 - 1 x 16.0 - 2 x 18.0 - 1 x 20.0 - 2 x 22.0 - 1 x 24.0 - 1 x 26.0 mm
Prod.-No. 1907003050
Prod.-No. 1907001050
B/41
B
ALFRA Rotabest® – HSS-Co-Eco Cutters
n
n
n
n
ions in
Dimens
le
With Weldon shank 19.0 mm,
availab
inches quest
2 clamping surfaces, 1 Countersinking for RotaQuick®
upon re
Internal bore: 6.35 mm
Steel quality: Special high-capacity speed steel, cobalt
Ground section: high performance toothing with pre- and post cutter
Ø in mm
Cutting depth
12.0
13.0
13.5
14.0
15.0
15.5
16.0
17.0
17.5
18.0
19.0
19.5
20.0
21.0
22.0
23.0
24.0
25.0
26.0
26.5
27.0
28.0
29.0
30.0
31.0
32.0
33.0
34.0
35.0
36.0
37.0
38.0
39.0
40.0
41.0
42.0
43.0
44.0
45.0
46.0
47.0
48.0
49.0
50.0
51.0
52.0
53.0
54.0
55.0
56.0
57.0
58.0
59.0
60.0
Ejector Pins Dimensions mm
suitable for:
ALFRA-Rotabest® (Weldon), ALFRA-RotaQuick® quick change system,
BDS, Bux, Ruko, Magnetor, Euroboor, Universal, Nitto, Jancy, Hougen,
Magtron, Promac, Rotabroach and as well as for all types of magnetic
Prod.-No. 25 mm
1901012025
1901013025
1901013525
1901014025
1901015025
1901015525
1901016025
1901017025
1901017525
1901018025
1901019025
1901019525
1901020025
1901021025
1901022025
1901023025
1901024025
1901025025
1901026025
1901026525
1901027025
1901028025
1901029025
1901030025
1901031025
1901032025
1901033025
1901034025
1901035025
1901036025
1901037025
1901038025
1901039025
1901040025
1901041025
1901042025
1901043025
1901044025
1901045025
1901046025
1901047025
1901048025
1901049025
1901050025
–
1901052025
–
–
1901055025
–
–
–
–
1901060025
Prod.-No.
35 mm
1901012035
1901013035
–
1901014035
1901015035
–
1901016035
1901017035
–
1901018035
1901019035
–
1901020035
1901021035
1901022035
1901023035
1901024035
1901025035
1901026035
–
1901027035
1901028035
1901029035
1901030035
1901031035
1901032035
1901033035
1901034035
1901035035
1901036035
1901037035
1901038035
1901039035
1901040035
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Prod.-No.
50 mm
1901012050
1901013050
1901013550
1901014050
1901015050
1901015550
1901016050
1901017050
1901017550
1901018050
1901019050
1901019550
1901020050
1901021050
1901022050
1901023050
1901024050
1901025050
1901026050
1901026550
1901027050
1901028050
1901029050
1901030050
1901031050
1901032050
1901033050
1901034050
1901035050
1901036050
1901037050
1901038050
1901039050
1901040050
1901041050
1901042050
1901043050
1901044050
1901045050
1901046050
1901047050
1901048050
1901049050
1901050050
1901051050
1901052050
1901053050
1901054050
1901055050
1901056050
1901057050
1901058050
1901059050
1901060050
Prod.-No.*
110 mm
–
–
–
–
–
–
–
–
–
–
–
-
1901020110
–
1901022110
–
1901024110
1901025110
1901026110
–
–
1901028110
–
1901030110
–
1901032110
–
–
1901035110
–
–
–
–
1901040110
–
–
–
–
1901045110
–
–
–
–
1901050110
–
–
–
–
–
–
–
–
–
–
1926500
6.35 x 77
1935500
6.35 x 87
1950500
6.35 x 102
2001502
8 x 160
* Attention: HSS-Co-Eco Cutters with cutting depth 110 mm can only be used with Tool Holder AMT 2 L ( Prod.-No. 18003 L )
or AMT 3 L ( Prod.-No. 18025 L).
B/42
Weldon
1
2
(2) cutter
ALFRA Rotabest® – HSS-Co-Eco Cutter Sets
B
request.
HSS-Co-Eco Cutter Set
Cutting Depth 25 mm
Prod.-No.
1901003025
6 pc. Cutter Set:
with 1 ea. of Ø 12.0 - 14.0 - 16.0 - 18.0 - 20.0 - 22.0 mm
Cutting Depth 25 mm
ions in
Dimens ilable
ava
inches quest
upon re
Prod.-No. 1901003025
Prod.-No.
1901001025
10 pc. Cutter Set:
with Ø 2 x 12.0 - 2 x 14.0 - 1 x 16.0 - 2 x 18.0 - 1 x 20.0 - 2 x 22.0 mm
Cutting Depth 50 mm
Prod.-No.
1901003050
Prod.-No. 1901001025
6 pc. Cutter Set:
with 1 ea. of Ø 14.0 - 16.0 - 18.0 - 20.0 - 22.0 - 26.0 mm
Cutting Depth 50 mm
Prod.-No.
1901001050
10 pc. Cutter Set:
with Ø 2 x 14.0 - 1 x 16.0 - 2 x 18.0 - 1 x 20.0 - 2 x 22.0 - 1 x 24.0 - 1 x 26.0 mm
Prod.-No. 1901003050
Prod.-No. 1901001050
B/43
B
ALFRA Rotabest® – HSS-Cobalt RQX Cutters, coated
n With Weldon shank 19.0 mm,
2 clamping surfaces, 1 Countersinking for
RotaQuick®
n Internal bore: 6.35 mm
n Steel quality: special quality high-capacity speed steel with cobalt, coated
n Ground section: high performance toothing
with pre- and post cutter
suitable for:
ALFRA-Rotabest® (Weldon), ALFRA-RotaQuick®
quick change system, BDS, Bux, Ruko, Magnetor, Euroboor, Universal, Nitto, Jancy, Hougen, Magtron, Promac, Rotabroach and as well as
for all types of magnetic drilling machines with
Weldon shank.
ions in
Dimens ilable
ava
inches quest
upon re
Ø in mm
Cutting depth 25 mm Prod.-No.
12.0
13.0
14.0
15.0
16.0
17.0
18.0
19.0
20.0
21.0
22.0
23.0
24.0
25.0
26.0
27.0
28.0
29.0
30.0
31.0
32.0
33.0
34.0
35.0
36.0
37.0
38.0
39.0
40.0
41.0
42.0
43.0
44.0
45.0
46.0
47.0
48.0
49.0
50.0
51.0
52.0
53.0
54.0
55.0
56.0
57.0
58.0
59.0
60.0
Ejector pin 6.35 x 77 mm
B/44
1902012025
1902013025
1902014025
1902015025
1902016025
1902017025
1902018025
1902019025
1902020025
1902021025
1902022025
1902023025
1902024025
1902025025
1902026025
1902027025
1902028025
1902029025
1902030025
1902031025
1902032025
1902033025
1902034025
1902035025
1902036025
1902037025
1902038025
1902039025
1902040025
1902041025
1902042025
1902043025
1902044025
1902045025
1902046025
1902047025
1902048025
1902049025
1902050025
1926500
Ø in mm
12.0
13.0
14.0
15.0
16.0
17.0
18.0
19.0
20.0
21.0
22.0
23.0
24.0
25.0
26.0
27.0
28.0
29.0
30.0
31.0
32.0
33.0
34.0
35.0
36.0
37.0
38.0
39.0
40.0
41.0
42.0
43.0
44.0
45.0
46.0
47.0
48.0
49.0
50.0
51.0
52.0
53.0
54.0
55.0
56.0
57.0
58.0
59.0
60.0
1902012050
1902013050
1902014050
1902015050
1902016050
1902017050
1902018050
1902019050
1902020050
1902021050
1902022050
1902023050
1902024050
1902025050
1902026050
1902027050
1902028050
1902029050
1902030050
1902031050
1902032050
1902033050
1902034050
1902035050
1902036050
1902037050
1902038050
1902039050
1902040050
1902041050
1902042050
1902043050
1902044050
1902045050
1902046050
1902047050
1902048050
1902049050
1902050050
1902051050
1902052050
1902053050
1902054050
1902055050
1902056050
1902057050
1902058050
1902059050
1902060050
1950500
1
Weldon
2
(2) cutter
ALFRA – HSS-Co RQX Cutter Sets
B
request.
HSS-Co RQX Cutter Set
Cutting Depth 25 mm
Prod.-No.
1902003025
6 pc. Cutter Set:
with 1 ea. of Ø 12.0 - 14.0 - 16.0 - 18.0 - 22.0 - 26.0 mm
in plastic box
Cutting Depth 25 mm
ions in
Dimens ilable
va
a
s
e
inch
quest
upon re
Prod.-No. 1902003025
Prod.-No.
1902001025
10 pc. Cutter Set:
with Ø 2 x 12.0 - 2 x 14.0 - 1 x 16.0 - 2 x 18.0 - 2 x 22.0 - 1 x 26.0 mm
in plastic box
Cutting Depth 50 mm
Prod.-No.
1902003050
Prod.-No. 1902001025
6 pc. Cutter Set:
with 1 ea. of Ø 14.0 - 16.0 - 18.0 - 20.0 - 22.0 - 26.0 mm
in plastic box
Cutting Depth 50 mm
Prod.-No.
1902001050
10 pc. Cutter Set:
with Ø 2 x 14.0 - 1 x 16.0 - 2 x 18.0 - 1 x 20.0 - 2 x 22.0 - 1 x 24.0 - 1 x 26.0 mm
in plastic box
Prod.-No. 1902003050
HSS-Cobalt Cutters for stack drilling (drilling in sandwich material) on
request! (Standard core drills aren't suitable.)
Prod.-No. 1902001050
B/45
B
ALFRA Rotabest® – ASP-30 Rail
n With Weldon shank 19.0 mm
n Steel quality: Cobalt high-capacity speed
steel on powder-metallurgical base with highest purity and improved strength compared
to older generation powder steel.
n Perfectly suitable for wear-intensive applications, such as drilling rails.
n These tools can also be used on all magnet
drilling machines, especially with Weldon
shank.
Ø in mm
14.0
16.0
17.0
18.0
19.0
20.0
22.0
23.0
24.0
25.0
26.0
27.0
27.5
28.0
30.0
31.0
32.0
33.0
34.0
36.0
1905014025
1905016025
1905017025
1905018025
1905019025
1905020025
1905022025
1905023025
1905024025
1905025025
1905026025
1905027025
1905027525
1905028025
1905030025
1905031025
1905032025
1905033025
1905034025
1905036025
1926500
Tip:
Well-proven for drilling Hardox and similar hightensile steels. Name your drilling problem, we
are pleased to advise.
Another Tip:
ASP-60 for "impossible" drilling jobs on request.
B/46
Suitable for:
all portable Magnet Drilling Machines with
19 mm Weldon arbor, but especially for Rail
Drilling Machines of the makes:
n Cembre
n Erico
n KKT
n Dubuis
ions in
Dimens ilable
n Universal
va
a
s
inche
n Magtron
quest
upon re
n Rotabroach
Ø in mm
14.0
16.0
17.0
18.0
19.0
20.0
22.0
23.0
24.0
25.0
26.0
27.0
27.5
28.0
30.0
31.0
32.0
33.0
34.0
36.0
1905014050
1905016050
1905017050
1905018050
1905019050
1905020050
1905022050
1905023050
1905024050
1905025050
1905026050
1905027050
1905027550
1905028050
1905030050
1905031050
1905032050
1905033050
1905034050
1905036050
1950500
ALFRA – HSS-Co-Eco Cutters for FEIN-QUICK IN
B
Suitable for FEIN Magnet Drilling Machines
n Suitable for FEIN Magnet Drilling Machines with Quick IN tool holder.
n You use FEIN Magnet Drilling Machines and do not want to do without
ALFRA-Rotabest® Cutters? Here is our range of HSS-Co-Eco Cutters suitable for the various FEIN types of machines.
n Special shank 18.0 mm with 4 ball recesses
n Steel quality: Special high-capacity speed steel, cobalt
n Internal bore: 6.4 mm.
n suitable for: FEIN Quick-IN quick change arbor, FEIN core drilling machines with Quick-IN quick-change system of types KBM 32 Q, KBM 50
Q, KBM 65 Q, KBM 65 QF
Ø in mm
Cutting depth 35 mm
12.0
13.0
14.0
15.0
16.0
17.0
18.0
19.0
20.0
21.0
22.0
23.0 24.0
25.0 26.0
27.0 28.0
29.0 30.0
31.0 32.0
Prod.-No.
1909012035
1909013035
1909014035
1909015035
1909016035
1909017035
1909018035
1909019035
1909020035
1909021035
1909022035
1909023035
1909024035
1909025035
1909026035
1909027035
1909028035
1909029035
1909030035
1909031035
1909032035
Prod.-No. 1936500
ions
Dimens s s in
e n
h
c
e
inDin
im nspioon able
u vail
le
b
a
s
e
il
avainch sat uest
reuqpuoen req
1936500
High performance toothing with pre- and post cutter
ALFRA – HSS-Co-Eco Cutters suitable for FEIN + Hitachi
n Adaptor with internal thread M18 x 6P 1.5
n Also suitable for Hitachi machines
Ø in mm
12.0
13.0
14.0
15.0
16.0
17.0
18.0
19.0
20.0
21.0 22.0
23.0 24.0
25.0
26.0
27.0 28.0
29.0 30.0
Cutting depth 50 mm
Prod.-No.
1908012050
1908013050
1908014050
1908015050
1908016050
1908017050
1908018050
1908019050
1908020050
1908021050
1908022050
1908023050
1908024050
1908025050
1908026050
1908027050
1908028050
1908029050
1908030050
B/47
B/48
Usable on Magnet Drilling - and Pillar Drilling Machines.
For constructional steels, hard-to-cut materials, such as
chrome-nickel steels and for non-ferrous metals, such as
aluminium or CuZn-alloys and many more.
Advantages of ALFRA ROTABEST® TCT Cutters
■
Good concentricity through solid construction
■
CAD - optimized cutting geometry for regular
chip break
■
Specially shaped chip flutes to avoid chip jamming
■
Immediate centering
■
No running off center
■
Low torque
■
Minimum demand for energy
■
Quick core removal through ejector pin
■
Long tool life
ALFRA “Chip-breaker system”
Very precise drilling in 3 steps.
1 pre-cutter
2 middle-cutter
3 post-cutter
B/49
B
ALFRA Rotabest® – TCT Cutters
Internal bore: Ø 14 - 17 mm = 6.35 mm
Ø 18 - 50 mm = 8.0 mm Ground section: high performance toothing
with pre- middle- and post cutter
n Perfectly suitable for wear-intensive applications.
n These tools can also be used on all magnetic
n
n
n
Ø in mm
14.0 15.0 16.0 17.0 18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0 26.0 27.0 28.0 29.0 30.0 31.0 32.0 33.0 34.0 35.0 36.0
37.0
38.0
39.0
40.0
41.0
42.0
43.0
44.0
45.0
46.0
47.0
48.0
49.0
50.0
-
Ejector Pin
for Ø 14 - 17 mm, 6.35 x 87 mm
Ejector Pin
for Ø 18 - 50 mm, 8 x 87 mm
B/50
2003014035
2003015035
2003016035
2003017035
2003018035
2003019035
2003020035
2003021035
2003022035
2003023035
2003024035
2003025035
2003026035
2003027035
2003028035
2003029035
2003030035
2003031035
2003032035
2003033035
2003034035
2003035035
1935500
2001500
Suitable for:
all magnetic drilling machines with Weldon
shank. ALFRA-Rotabest® (Weldon), ALFRA-RotaQuick® quick-change system, on BDS, Bux,
Ruko, Magnetor, Euroboor, Universal, Nitto,
Jancy, Hougen, Magtron, Promac, Rotabroach,
etc.
Ø in mm
14.0
15.0 16.0
17.0
18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0 26.0 27.0 28.0 29.0 30.0 31.0 32.0 33.0 34.0 35.0 36.0 37.0 38.0 39.0 40.0 41.0 42.0 43.0 44.0 45.0 46.0 47.0 48.0 49.0 50.0 2003014050
2003015050
2003016050
2003017050
2003018050
2003019050
2003020050
2003021050
2003022050
2003023050
2003024050
2003025050
2003026050
2003027050
2003028050
2003029050
2003030050
2003031050
2003032050
2003033050
2003034050
2003035050
2003036050
2003037050
2003038050
2003039050
2003040050
2003041050
2003042050
2003043050
2003044050
2003045050
2003046050
2003047050
2003048050
2003049050
2003050050
Ejector Pin
for Ø 14 - 17 mm, 6.35 x 102
1950500
Ejector Pin
for Ø 18 - 50 mm, 8 x 102 mm
2001501
1 pre-cutter
2 middle-cutter
3 post-cutter
Speed Chart, see catalogue page B/132
B
ALFRA Rotabest® – TCT Cutters
Suitable for all core drilling, pillar drilling and milling machines
n Heavy industrial type with keyway and feather key
n In extensive test series, this special design with keyway and feather key
has proven outstanding compared to the standard Weldon shank 32 mm.
Optimal absorption of the high torsion forces.
n Ground section: high performance toothing with pre- middle- and post
cutter.
n Required: Tool holder with internal cooling
AL 3
MT 3
Prod.-No. 20230
ions in
Dimens ilable
AL 4
MT 4
Prod.-No. 20240
va
a
s
inche
AL 5
MT 5
Prod.-No. 20250
quest
upon re
n Upon request: 100 mm cutting depth and ejector pin
8 x 160 mm Prod.-No. 2001502
Ø in mm
depth 50 mm
51.0 ■
52.0 ■
53.0 ■
54.0 ■
55.0 56.0 ■
57.0 ■
58.0 ■
59.0 ■
60.0 61.0 ■
62.0 ■
63.0 ■
64.0 ■
65.0 66.0 ■
67.0 ■
68.0 ■
69.0 ■
70.0 71.0 ■
72.0 ■
73.0 ■
74.0 ■
75.0 76.0 ■
77.0 ■
78.0 ■
79.0 ■
80.0 81.0 ■
82.0 ■
83.0 ■
84.0 ■
85.0 86.0 ■
87.0 ■
88.0 ■
89.0 ■
90.0 91.0 ■
92.0 ■
93.0 ■
94.0 ■
95.0 96.0 ■
97.0 ■
98.0 ■
99.0 ■
100.0 ■ No series production
Ejector pin 8 x 102 mm
Tool holder AL 2/MT 2
Not suitable for automatic feed.
Prod.-No.
2002051050
2002052050
2002053050
2002054050
2002055050
2002056050
2002057050
2002058050
2002059050
2002060050
2002061050
2002062050
2002063050
2002064050
2002065050
2002066050
2002067050
2002068050
2002069050
2002070050
2002071050
2002072050
2002073050
2002074050
2002075050
2002076050
2002077050
2002078050
2002079050
2002080050
2002081050
2002082050 2002083050
2002084050
2002085050
2002086050
2002087050
2002088050
2002089050
2002090050
2002091050
2002092050
2002093050
2002094050
2002095050
2002096050
2002097050
2002098050
2002099050
2002100050
2001501
20220
20230
20240
20250
Shorter, more stable tool setup.
ALFRA Design.
High concentricity.
1 pre-cutter
2 middle-cutter
3 post-cutter
Advantages of ALFRA TCT Cutters, “Heavy Industrial Type”
n Perfect cutting behaviour – even at the first bore
n Excellent centering properties
n Low cutting pressure – low power input
n Vibration-free work process
n Chip separation – no jamming of the chips
n Cutting depth can be achieved in one work step
n Drilled core ejected without effort
Prod.-No. 20230
B/51
B
ALFRA Rotabest® – TCT Cutters, RAIL
n With Weldon shank 19.0 mm
n Perfectly suitable for wear-intensive applications, such as drilling rails.
n Ground section: high performance toothing
with pre- middle- and post cutter
Ø in mm
19.0
20.0
21.0
22.0
23.0
24.0
25.0
26.0
27.5
28.0
30.0
31.0
32.0
33.0
34.0
36.0
2005019025
2005020025
2005021025
2005022025
2005023025
2005024025
2005025025
2005026025
2005027525
2005028025
2005030025
2005031025
2005032025
2005033025
2005034025
2005036025
1926500
Suitable for:
all portable Magnet Drilling Machines with
19 mm Weldon arbor, but especially for Rail
Drilling Machines of the following makes: n Cembre
n Erico
n KKT
n Dubuis
n Universal
n Magtron
n Rotabroach
Ø in mm
19.0
20.0
21.0
22.0
23.0
24.0
25.0
26.0
27.5
28.0
30.0
31.0
32.0
33.0
34.0
36.0
2005019050
2005020050
2005021050
2005022050
2005023050
2005024050
2005025050
2005026050
2005027550
2005028050
2005030050
2005031050
2005032050
2005033050
2005034050
2005036050
1950500
1 pre-cutter
2 middle-cutter
3 post-cutter
B/52
ALFRA – HSS Cutters suitable for FEIN + Hitachi
B
n 2008... with internal thread M18 x 6P 1.5.
Also suitable for Hitachi machines
n 2009... suitable for FEIN Magnet Drilling Machines with Quick IN tool
holder.
Ø in mm
12.0
13.0
14.0
15.0
16.0
17.0
18.0
19.0
20.0
21.0
22.0
23.0
24.0
25.0
26.0
27.0
28.0
29.0
30.0
31.0
32.0
33.0
34.0
35.0
36.0
37.0
38.0
39.0
40.0
41.0
42.0
43.0
44.0
45.0
46.0
47.0
48.0
49.0
50.0
51.0
52.0
53.0
54.0
55.0
57.0
58.0
59.0
60.0
61.0
62.0
63.0
64.0
65.0
Prod.-No.
Prod.-No.
M18 x 6P 1.5
Quick IN
Cutting Depth 50 mm Cutting depth 35 mm
2008012050
2009012035
2008013050
2009013035
2008014050
2009014035
2008015050
2009015035
2008016050
2009016035
2008017050
2009017035
2008018050
2009018035
2008019050
2009019035
2008020050
2009020035
2008021050
2009021035
2008022050
2009022035
2008023050
2009023035
2008024050
2009024035
2008025050
2009025035
2008026050
2009026035
2008027050
2009027035
2008028050
2009028035
2008029050
2009029035
2008030050
2009030035
2008031050
2009031035
2008032050
2009032035
2008033050
2009033035
2008034050
2009034035
2008035050
2009035035
2008036050
2009036035
2008037050
2009037035
2008038050
2009038035
2008039050
2009039035
2008040050
2009040035
2008041050
2009041035
2008042050
2009042035
2008043050
2009043035
2008044050
2009044035
2008045050
2009045035
2008046050
2009046035
2008047050
2009047035
2008048050
2009048035
2008049050
2009049035
2008050050
2009050035
2008051050
2009051035
2008052050
2009052035
2008053050
2009053035
2008054050
2009054035
2008055050
2009055035
2008057050
2009057035
2008058050
2009058035
2008059050
2009059035
2008060050
2009060035
2008061050
2009061035
2008062050
2009062035
2008063050
2009063035
2008064050
2009064035
2008065050
2009065035
-
Prod.-No. 2008...
Thread adaptor M18 x 6P1.5
Prod.-No. 2009...
Prod.-No.
1936500
1936500
1 pre-cutter
2 middle-cutter
3 post-cutter
Speed Chart, see catalogue page B/131
B/53
Ergonomically
designed handle
Motor with highperformance gear box
Continuously adjustable
mitres up to 45°
(with 5 locking positions)
Solid base plate
B/54
Automatically
retracting blade guard
ALFRA RotaSpeed® – Metal Cutting Saw RS 230A
B
Hand operated
The ideal machine for worksite and workshop, for almost burr-free cutting
without cooling.
For fast and clean cuts in pipes, threaded rods, profiles, wire ducts, corrugated and trapezoidal sheets, sandwich panels, dry mortarless construction
profiles and many more.
Advantages at a glance:
n 1800 Watt high-performance motor for exact cuts without coolant.
n Fast and easy change of saw blade.
n Continuously adjustable cutting depth to 82 mm.
n The base blade is adjustable for mitre cuts up to 45°.
n Chip collector.
n The ideal machine for site assembly companies, facade builders, repair
shops, locksmitheries, rack builders, roofers, booth builders, welding
shops, plumbing and heating contractors.
n Ideally applicable, where angle grinders aren´t strong enough or clean
enough.
n Ideal for weld preparation by mitre cutting.
n With optical laser for proper alignment of cuts.
Prod.-No. 22411
ALFRA RotaSpeed® RS 230A
Saw blade diameter:
Saw blade tool holder:
Power:
Speed, rpm:
Mitre:
Cutting capacity mm 0°:
Cutting capacity mm 45°:
Max. material thickness
(depending on material):
Voltage:
Weight:
Alfra RotaSpeed® RS 230A
230 (9”)
25.4 mm (1“)
1800 Watts
2700
0 - 45°
82
56
8 mm
230 - 50 Hz
8 kg
Prod.-No.
22411
Scope of Supply:
Machine with 2 TCT Saw Blades (premium quality), Operation Manual, Rip
Fence, Set of Tools, Distance sleeve for Saw Blade Arbor, in cardboard box.
We reserve the right to make technical changes.
B/55
B
ALFRA Circular Saw Blades – RotaSpeed®
ALFRA-RotaSpeed® TCT Circular Saw Blades. • Made in Germany
n Tungsten carbide tipped, suitable for metal cutting saws from:
ALFRA, Flex, Euroboor, Evolution, Hitech, Jepson, Metallkraft, Ridgid, etc.
n These special TCT circular saws ensure fast and clean cuts in pipes,
threaded rods, profiles, corrugated and trapezoidal sheets, wire ducts,
sandwich panels, dry mortarless construction profiles, fastening profiles
(DIN rails), grates using dry cutting method.
n For use on metals, CrNi steel*, aluminium.
n High cutting performance and tool life. The excellent price/performance
ratio makes these saws highly economical.
n The corresponding manufacturer's machine guidelines and notes on use
must be observed when using these saw blades.
Premium Quality
Cutting Application
Dimensions mm
No. Ø mm
of teeth
180/7“ Steel*
180 x 20
34
180/7“ Aluminium
180 x 20
48
200/8“
200/8“
200/8“
230/9“
230/9“
230/9“
Prod.-No.
22205
22206
Steel*
Aluminium
for trapezoidal sheets
200 x 20
200 x 20
200 x 20
42
54
68
22255
22256
22257
Steel*
Aluminium
for trapezoidal sheets
230 x 25.4
230 x 25.4
230 x 25.4
48
62
80
22305
22306
22307
* With stainless steel, the tool life will be lower in relation to the material
thickness.
Packaging unit = 1 piece
Prod.-No. 18654
Magnetic Chip Remover
In a stainless steel round rod, you can move a magnet
back and forth. The strong magnet picks up metal chips –
pull a knob and the chips fall off. For more cleanliness in the work place.
Prod.-No.
ALFRA Magnetic Chip Remover, Length 400 mm
18654
B/56
B
ALFRA RotaDry® – Drycutter 355
Arguments which are convincing in quality, performance and pricing:
n For almost burr-free cutting of profiles and pipes out of steel, iron,
copper, brass, aluminium, plastics, composites and stainless steel
without cooling.
n Application e.g. in steel construction, cabinet making, interior fittings etc.
n With depth fence for accurate cutting
n Angle and parallel stopper for mitre cuts up to 45°
n With a removable chip collecting sump
n With arbor adjustment for changing the saw blades
n Easy to transport
ALFRA RotaDry® 355
Saw blade diameter
Motor
Input
Speed
Cutting capacity 90° Cutting capacity 90° Cutting capacity 90° Cutting capacity 45° Cutting capacity 45° Cutting capacity 45° Weight
Alfra RotaDry® 355, with 1 TCT
355 mm
230 V/50 Hz
2200 W
1300 rpm
13 mm wall thickness
23 kg
Saw Blade 72 T (teeth)
Accessories:
Robust prism jaws Perfect for sawing tubes with thin wall thickness
180 x 105 mm 120 x 120 mm 135 mm
110 x 100 mm 100 x 100 mm 105 mm
Prod.-No.
22420
22421
Prod.-No. 22420
Spare TCT Circular Saw Blades
also suitable for cutting-off machines, such as:
Jepson/Global/Ridgid/Ryobi
The universal TCT saw blade for fast cutting of:
steel – copper – aluminium– profiles– cable – sheet metal – solid material
n without coolant
n Regrindable
n Low noise due to laser ornaments
Deliverable dimensions
305
305
355
355
355
x
x
x
x
x
2.2 x 25.4
2.2 x 25.4
2.4/2.0 x 25.4
2.6 x 25.4
2.6 x 25.4
60
80
72
80
90
Steel
T
T
T
T
T
•
•
•
•
•
355 x 2.6 x 25.4
90 T coated
Other tooth counts upon request.
Prod.-No.
32100
32101
32108
32103
32102
32105
355 x 2.6 x 25.4 • 90 T • coated
B/57
Band saw tension knob
Twist free
sawing frame –
precision milled
High-performance single-phase-motor
Ergonomic handle
Stepless Mitre
0 - 45° (60°)
Clamping vise
Robust bases
with feet
B/58
Portable Band Saw Machines for
Professionals
Special Features:
• Perfect Portable
• For mitre cut 0 - 45 ° (60°) stepless
• Very fast saw band exchange
• Safe material clamping
• Robust high-performance motor, rotation speed
continuously adjustable (also ideal for stainless steel)
•
Adjustable
ball-bearing blade guide for accurate
Our new machines have an excellent price-perforangle cutting
mance-ratio and are setting new standards. The
• Patented blade tensioning with overload
robust and compact design makes it ideal for
protection
handling in the machine shop or the construction
site.
There is a variety of portable band saw machines,
but only a few of them are suitable for industrial
applications or at a construction site.
Pricing is usually being more important than reliability and durability.
Ideally qualified for locksmiths, plumbing, metal-,
heating-, pipeline- and mechanical workshops.
Also for construction companies, public utilities
with or without mobile workshops, power stations, schools, technical learning and teaching
facilities.
Easy to carry handle
Mitre stepless up to 45° (60°)
Perfect, adjustable blade adjustment
Patented band tensioning
B/59
B
ALFRA Band Saw Machine – RC 105
MAX 105 mm
D
RY- C UT
Prod.-No. 22600
Band Saw Machine RC 105
Prod.-No.
22600
Technical Data:
1-phase motor 950 W
Power
230 Volt
Cutting speed 30 bis 80 min-1
(speed regulation with thermal and overload protection)
Mitre
0 - 45°
Band saw measurements
1335 x 13 x 0.65 mm
Weight
16 kg
Cutting capacity
0°
45°
105 mm
65 mm
95 x 95 mm
65 x 65 mm
Scope of Supply:
• Portable Band Saw Machine RC 105 - 230 V
• 1 HSS Bi-Metal Band saw blade
B/60
100 x 85 mm
65 x 60 mm
B
MAX 120 mm
D
RY- C UT
Prod.-No. 22610
Prod.-No.
22610
Technical Data:
1-phase motor 1.200 W
Power
230 Volt
Mitre
0 - 45°
1440 x 13 x 0.65 mm
Weight
17 kg
Cutting capacity
0°
45°
120 mm
85 mm
119 x 119 mm
80 x 80 mm
120 x 115 mm
85 x 70 mm
Scope of Supply:
B/61
MAX 120 mm
B
MAX 205 mm
D
RY- C UT
Prod.-No. 22650
MAX 205 mm
Prod.-No.
22650
Applicable for very big cutting widths, up to 205 mm max. perfect for wire ducts (cable trays), wall cable ducts etc.
Technical Data:
1-phase motor Power
Cutting speed Mitre
Weight
1600 W
230 Volt
60 / 80 min-1
0 - 45°
1735 x 13 x 0.9 mm
36 kg
Cutting capacity
0°
45°
152 mm
120 mm
150 x 150 mm
106 x 106 mm
Scope of Supply:
B/62
205 x 120 mm
118 x 60 mm
B
ALFRA Band Saw Machine – RCP 120
MAX 120 mm
RY- C UT
C
D
UTTING
-60%
TIME
Prod.-No. 22620
Band Saw Machine RCP 120
Prod.-No.
22620
Technical Data:
1-phase motor 1300 W
Power
230 Volt
Mitre
0 - 60°
1440 x 13 x 0.65 mm
Weight
18 kg
Cutting capacity
0°
45°
60°
120 mm
80 mm
50 mm
112 x 112 mm
78 x 78 mm
43 x 43 mm
120 x 102 mm
78 x 78 mm
50 x 43 mm
Scope of Supply:
• Portable Band Saw Machine RCP 120 - 230 V
B/63
B
MAX 150 mm
RY- C UT
C
D
UTTING
-40%
TIME
Prod.-No. 22630
Prod.-No.
22630
Technical Data:
Power
230 Volt
Mitre
0 - 45°
1735 x 13 x 0.9 mm
Weight
35 kg
Cutting capacity
0°
45°
150 mm
100 mm
150 x 150 mm
100 x 100 mm
Scope of Supply:
B/64
160 x 140 mm
120 x 100 mm
B
MAX 170 mm
RY- C UT
C
D
UTTING
-40%
TIME
Technical Data:
Power
230 Volt
(konstant durch elektr. Regelung)
Mitre
0 - 60°
2140 x 19 x 0.9 mm
Weight
150 kg
Workbench for RCP 170 incl. cooling device and filtration
Scope of Supply:
Prod.-No.
22640
Prod.-No. 22640
Cutting capacity
0°
45°
60°
170 mm
110 mm
75 mm
170 x 170 mm
110 x 110 mm
75 x 75 mm
198 x 55 - 190 x 130 mm
150 x 110 mm
100 x 70 mm
B/65
B
ALFRA HSS-Bi-Metal Saw Blades
suitable for
Rotacut RC 105
Rotacut RC 120
Dimension
Prod.-No.
1335x13x0.65 mm 6 tpi
341-13065-1335-0600
1335x13x0.65 mm 8/12 tpi
341-13065-1335-0812
1335x13x0.65 mm 14 tpi
341-13065-1335-1400
1440x13x0.65 mm 6 tpi
341-13065-1440-0600
1440x13x0.65 mm 8/12 tpi
341-13065-1440-0812
1440x13x0.65 mm 14 tpi
341-13065-1440-1400
1735x13x0.9 mm 8/12 tpi
341-13090-1735-0812
1735x13x0.9 mm 14 tpi
341-13090-1735-1400
1440x13x0.65 mm 6 tpi
341-13065-1440-0600R
1440x13x0.65 mm 8/12 tpi
341-13065-1440-0812R
1440x13x0.65 mm 14 tpi
341-13065-1440-1400R
1735x13x0.9 mm 6 tpi
341-13090-1735-0600R
1735x13x0.9 mm 6/10 tpi
341-13090-1735-0610R
1735x13x0.9 mm 14 tpi
341-13090-1735-1400R
2140x20x0.9 mm 4/6 tpi
341-20090-2140-0406R
2140x20x0.9 mm 6/10 tpi
341-20090-2140-0610R
2140x20x0.9 mm 14 tpi
341-20090-2140-1400R
Rotacut RC 205
Rotacut RCP 120
Rotacut RCP 150
Rotacut RCP 170
B/66
B
ALFRA Workbench – RCT 6542
Prod.-No. 22601
Workbench RCT 6542
Workbench RCT 6542
Prod.-No.
22601
Advantages at a glance:
n
n
n
n
n
n
n
n
n
Inexpensive, collapsible workbench
ideal for construction sites
Made from steel profiles
Three-level height adjustment 740 - 820 - 870 mm
For wide range of applications
Table size 650 x 420 mm
For all portable Rotacut band saw machines
Collapsible, portable
Weight 11 kg
Scope of Supply:
• Portable Workbench RCT 6542
• Operation Manual
B/67
Single Acting
APS-120
Double Acting
APS-110-D
B/68
- Press
Hydraulic Punching Units
►►Easily portable, fully automatic Hydraulic Punching
Units for steel-, bridge-, container, crane- and metal
construction
►►Mobile use, no transport of material
►►Almost noiseless punching
►►Easy Positioning through Stop-funktion of punch
►►For choice:
Single or Double Action
APS-70 Eco – Set
B/69
B
ALFRA
PRESS Hydraulic punches – Overview
Page B/72
Page B/72
Page B/72
APS 60
APS 70
APS 120
Prod.-No.
23001
23002
23004
Max.
hole Ø
18 mm
11/16“
22 mm
7/8“
25 mm
1-1/16“
–
–
22 x 14 mm
7/8” x 9/16”
25 x 18 mm
1” x 11/16”
10 mm
3/8”
13 mm
1/2“
16 mm
5/8“
SC 05 II-B: approx. 7 sec.
SC 17: approx. 4 sec.
60 mm
2-3/8“
70 mm
2-3/4“
110 mm
4-3/8“
Max.
pressure 700 bar
10.150 psi
700 bar
10.150 psi
700 bar
10.150 psi
Punching force
22 t
30 t
44 t
16 mm
5/8“
18 mm
11/16“
25 mm
15/16“
17 kg / 37 lbs
21 kg / 46 lbs
35 kg / 77 lbs
Max.
oblong hole
Max. material thickness 410 - 490 N/mm2
Total
punching time with pump …
Throat
depth
Punch
stroke
Weight
Scope of delivery
Hydraulic hose 5 m / Spanner
Punch/die Ø 14 mm
Punch/die Ø 18 mm
Punch/die Ø 22 mm
Depth adjustment, suspension bracket Depth adjustment, suspension bracket
ALFRA – Hydraulic Pumps
SC 05 II-B
SC 17
23007
23170
750 bar / 10670 psi
750 bar / 10670 psi
Pumping capacity
0.94 l/min at 2770 rpm
Motor power
1100 W, 230V (50 Hz)*
1500 W, 230V (50 Hz)*
Prod.-No.
Max. pressure
Oil quantity
Weight incl. oil
B/70
* On request: 230V (60 Hz); 110 V (50 Hz); 110V (60 Hz)
5 l
17 l
27 kg
45 kg
* On request 230V (60 Hz); 110V (50 Hz); 110V (60 Hz)
ALFRA
PRESS Hydraulic punches – Overview
Page B/74
Page B/75
APS 110 D
APS 70 Eco
23181
23002.Eco
25 mm
1-1/16“
22 mm
7/8“
25 x 18 mm
1” x 11/16”
22 x 14 mm
7/8” x 9/16”
16 mm
5/8“
13 mm
1/2“
SC 17 D: approx. 8 sec.
110 mm
4-3/8“
70 mm
2-3/4“
700 bar
10.150 psi
700 bar
10.150 psi
44 t
30 t
25 mm
15/16“
18 mm
11/16“
35 kg / 77 lbs
21 kg / 46 lbs
Punch/die Ø 22 mm
Depth adjustment, suspension bracket
Depth adjustment
SC 17 D
SC 03
23186
23006
750 bar / 10670 psi
700 bar / 10150 psi
1500 W, 230V (50 Hz)*
550 W, 230V (50 Hz)*
B
* On request: 230V (60 Hz); 110V (50 Hz); 110V (60 Hz)
17 l
2.5 l
47 kg
17 kg
B/71
B
ALFRA Press – Hydraulic Punches, single-acting
ALFRA-Press APS 60
Prod.-No.
Hydraulic Punching Unit with
23001
automatic return by means of neoprene spring, no oblong holes
Technical data:
max. hole Ø mm
18 mm
max. material thickness with DIN S275 10 mm
Total punching time: with pump SC 05 II B
approx. 7 sec.
with pump SC 17
approx. 4 sec.
Throat depth
60 mm
max. pressure
700 bar (10.000 psi)
Punching force
22 t
Punch stroke
16 mm
Weight
17 kg
Scope of Supply:
punching unit, control cable, hydraulic hose 5 m, spanner,
1 punch and die each, Ø 14 mm
ALFRA-Press APS 70
automatic return by means of neoprene spring
Prod.-No. 23001
Prod.-No.
23002
Technical data
max. hole Ø mm
22 mm
Oblong holes max.
22 x 14 mm
Total punching time:
with pump SC 05 II B
10 sec.
with pump SC 17
4 sec.
Throat depth
70 mm
max. pressure
700 bar (10.000 psi)
Punching force
30 t
Punch stroke
18 mm
Weight
21 kg
Scope of Supply:
1 punch and die each, Ø 18 mm, 1 depth adjustment, 1 suspension bracket
ALFRA-Press APS 120
Prod.-No.
23004
Technical data
max. hole Ø mm
25 mm
Oblong holes max.
25 x 18 mm
Total punching time:
with pump SC 05 II B
16 sec.
with pump SC 17
5 sec.
Throat depth
110 mm
max. pressure
700 bar (10.000 psi)
Punching force
44 t
Punch stroke
25 mm
Weight
35 kg
Scope of Supply:
Important technical notice:
The standard punching units are not suitable for punching high-tensile
tool steels, stainless steels or boiler
plates.
Ask for our technical advice for punching jobs in this application range.
B/72
Prod.-No. 23002
Prod.-No. 23004
Type
A
B
C
D
E
F
G
H
I
J
K
L
M
N
APS 60
60 17 12 51 73 92 75 40 74 162 360 552 110 135
APS 70
70 24 15 51 85 100 80 40 80 204 382 562 125 135
APS 120 110 25 18 51 111 110 90 68 100 285 442 585 144 135
B
ALFRA – Hydraulic Pumps
For the use of our Punching Units, there are two Hydraulic Pumps available
ALFRA Hydraulic Pump SC 05 II-B for APS 60, 70, 120
ALFRA Hydraulic
ALFRA Hydraulic
ALFRA Hydraulic
ALFRA Hydraulic
Pump
Pump
Pump
Pump
SC
SC
SC
SC
05
05
05
05
Technical data:
Operating pressure max.
Pumping capacity
Oil quantity
Single-phase motor 2770 rpm
Weight incl. oil II-B
II-B
II-B
II-B
Prod.-No.
230V 50 Hz
23007
230V 60 Hz 23007.230-60Hz*
110V 50 Hz 23007.110-50Hz*
110V 60 Hz 23007.110-60Hz*
750 bar (10.670 psi)
0.94 l/min at 2.770 rpm
5.0 l
1100 W 110V or 230V 50 Hz or 60 Hz
27 kg
Prod.-No. 23007
*On request
ALFRA Hydraulic Pump SC 17 for APS 60, 70, 120
ALFRA Hydraulic Pump SC 17
Complete with control and switch box.
Prod.-No.
230V 50 Hz
23170
230V 60 Hz 23170.230-60Hz*
110V 50 Hz 23170.110-50Hz*
110V 60 Hz 23170.110-60Hz*
This new pump was especially developed to drastically reduce the punching time. Specially suitable for the use in the workshop.
Technical data:
Pumping capacity
Oil quantity
Weight incl. oil
and transport rollers
Dimensions L x W x H
750 bar (10.670 psi)
at 50 Hz 1.50 I/min at 1.370 rpm
17 l
1500 W 230 V 50 Hz
45 kg
550 x 370 x 560 mm
SC 17
Prod.-No. 23170
*On request
B/73
B
ALFRA Press – Hydraulic Punching Units, double-acting
ALFRA-Press APS 110D
Hydraulic Punching Unit with automatic return
Technical data
max. hole Ø mm
Oblong holes max.
max. material thickness with DIN S275
Total punching time with pump SC 17-D
Throat depth
max. pressure
Punching force
Punch stroke
Weight
Prod.-No.
23181
25 mm
25 x 18 mm
16 mm
8 sec.
110 mm
700 bar (10.000 psi)
44 t
25 mm
35 kg
Scope of Supply:
Punching unit, control cable, hydraulic hose 5 m, spanner,
Prod.-No. 23181
Type
A
B
C
D
E
F
G
H
I
J
K
L
M
N
APS 110D 110 24 18 55 90 112 73 41 78 295 387 468 141 124
Important technical notice:
The standard punching units are not suitable for punching high-tensile
tool steels, stainless steels or boiler
plates.
Ask for our technical advice for punching jobs in this application range.
ALFRA Hydraulic Pump SC 17D for APS 110D
Double Acting
ALFRA Hydraulic-Pump SC 17D
Complete with control and switch box.
*On request
Prod.-No.
230V 50 Hz
23186
230V 60 Hz 23186.230-60Hz*
110V 50 Hz 23186.110-50Hz*
110V 60 Hz 23186.110-60Hz*
Connector for
double hose package
With connector for double hose package.
This new pump was especially developed to drastically reduce the punching time. Specially suitable for the use in the workshop.
Technical data:
Pumping capacity
Oil quantity
Weight incl. oil
and transport rollers
Dimensions L x W x H
B/74
750 bar (10.670 psi)
at 50 Hz 1.40 I/min at 1.370 rpm
17 l
1.500 W 230 V 50 Hz
47 kg
550 x 370 x 560 mm
Prod.-No. 23186
SC 17 D
ALFRA Press – Hydraulic Punching Units, Eco
B
ALFRA Press APS 70 Eco
Prod.-No.
23002.Eco
Technical data:
max. hole Ø mm
22 mm
Total punching time with Pump SC 03 approx. 18 sec.
Throat depth
70 mm
max. pressure
700 bar (10.150 psi)
Punching force
30 t
Punch stroke
18 mm
Weight
21 kg
Scope of Supply:
APS 70 Eco hydraulic punching unit, control cable, hydraulic hose 3 m,
spanner, depth adjustment
Prod.-No. 23002.Eco
ALFRA Hydraulic Pump SC 03 for APS 70 Eco
Prod.-No.
Electrohydraulic pump SC 03
230V 50 Hz
23006
230V 60 Hz 23006.230-60Hz*
110V 50 Hz 23006.110-50Hz*
110V 60 Hz 23006.110-60Hz*
complete with hand switch, 2.0 m hydraulic hose with quick coupling
*On request
Optional:
Foot switch with 2-pedals, start-stop function
Prod.-No.
03866-B
Technical data:
Motor voltage:
230V / 50Hz; 230V / 60Hz;
110V / 50Hz; 110V / 60Hz
Motor power:
0.55 KW, 2.720 rpm
Max. operating pressure:
700 bar
Pump capacity:
62 l/min. at 60 Hz
0.52 l/min. at 50 Hz
Tank volume:
2.5 l / useable: 1.5 l
Temperature switch:
80°C +/- 5°
Weight:
17 kg
Dimensions L x W x H:
330 x 180 x 350 mm
ALFRA Press APS 70 Eco-Set
Complete set
Prod.-No.. 23006
Prod.-No. 03866-B
Prod.-No.
23003
Scope of Supply:
ALFRA APS 70 Eco Hydraulic Punching Unit
ALFRA Hydraulic Pump SC 03, 230V / 50Hz
Hydraulic hose, 3m
Foot switch
Spanner
Prod.-No. 23003 Eco-Set
B/75
B
ALFRA – Spring Hoists
For ALFRA Press Hydraulic Punching Units
Prod.-No.
with locking device, spring fracture safety device, cable 2.0 m
9362 B
15 - 20 kg
23150
9363 B
20 - 25 kg
23151
9366 B
35 - 45 kg
23152
Note:
Actuation of spring hoist only with suspended Punching Unit resp. under
load.
Prod.-No. 23152
ALFRA – Service-Boy
for APS hydraulic pump bracket, all types – TÜV-tested –
This handy time- and energy saving cart makes the handling of our Hydraulic Punching Units more comfortable.
Absolutely necessary for every structural steel worker- even where our
Hydraulic Punching Units are already used.
n Easy positioning of the Punching Head at the steel girder due to gas pressure shock absorber.
n Being located on the Service Boy the hydraulic pump does not need to
be carried any longer.
n Tool cabinet with drawers for clean arrangement of the punching tools and accessories.
n Solid and safe construction with TÜV certificate (tested by the German
Technical Supervision Authority) - less expensive than any “self-made”
construction.
n Dimensions (L x W x H): 900 x 530 x 2000 mm
Complete with tool cabinet and drawers
Prod.-No.
23160
n IMPORTANT:
Please indicate
the punch model with your order
(APS 70 – 120 – 110 D)
Prod.-No. 23160 (Tools and Punching Unit/Pump not included)
B/76
B
ALFRA – Original Tools
Punches for
APS 120/120 Eco APS 70/70 Eco
PS 110D
A
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
-
■
-
■
-
APS 60
Ø mm
Prod.-No.
■
■
■
■
■
■
■
■
■
■
■
■
-
-
-
-
-
-
-
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25*
23-01-07
23-01-08
23-01-09
23-01-10
23-01-11
23-01-12
23-01-13
23-01-14
23-01-15
23-01-16
23-01-17
23-01-18
23-01-19
23-01-20
23-01-21
23-01-22
23-01-23
23-01-24
23-01-25
APS 60
Ø mm
Prod.-No.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
■
■
■
■
■
■
■
■
■
■
■
■
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
7
8
9
10
11
12
13
14
15
16
17
18
23-02-07
23-02-08
23-02-09
23-02-10
23-02-11
23-02-12
23-02-13
23-02-14
23-02-15
23-02-16
23-02-17
23-02-18
23-02-19
23-02-20
23-02-21
23-02-22
23-02-23
23-02-24
23-02-25
23-03-07
23-03-08
23-03-09
23-03-10
23-03-11
23-03-12
23-03-13
23-03-14
23-03-15
23-03-16
23-03-17
23-03-18
Prod.-No. 23-01-..
*) with tension nut Prod.- No. 23004-056 B
Dies for
APS 120/120 Eco APS 70/70 Eco
PS 110D
A
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
-
■
-
■
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Prod.-No. 23-02-..
Tip:
Punches and Dies are interchangeable with
Nitto/Selfer Punching Systems.
Tip:
Please oil punch from time to time, when material is heavily oxidized.
Important:
For material DIN S233: max. material thickness = 0.8 x hole Ø
For material DIN S275: max. material thickness = 0.5 x hole Ø
B/77
B
ALFRA – Original Tools
5°-bevelled Dies for
APS 120
PS 110D
A
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
APS 70
■
■
■
■
■
■
■
■
■
■
■
■
■
-
-
-
Prod.-No.
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
23-04-10
23-04-11
23-04-12
23-04-13
23-04-14
23-04-15
23-04-16
23-04-17
23-04-18
23-04-19
23-04-20
23-04-21
23-04-22
23-04-23
23-04-24
23-04-25
Punch
Prod.-No.
23-01-1608
23-01-1809
23-01-1811
23-01-2010
23-01-2012
23-01-2014
23-01-2211
23-01-2214
23-01-2412
23-01-2509
23-01-2512
23-01-2513
23-01-2514
23-01-2518
Die
Prod.-No.
23-02-1608
23-02-1809
23-02-1811
23-02-2010
23-02-2012
23-02-2014
23-02-2211
23-02-2214
23-02-2412
23-02-2509
23-02-2512
23-02-2513
23-02-2514
23-02-2518
Oblong tools for
mm
16 x 8
18 x 9
18 x 11
20 x 10
20 x 12
20 x 14
22 x 11
22 x 14
24 x 12
25 x 9*
25 x 12*
25 x 13*
25 x 14*
25 x 18*
Ø mm
APS 120
APS 70
APS 110D
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
-
■
-
■
-
■
-
■
-
■
-
Prod.-No. 23-04-..
(for girders with bevelled beams)
Prod.-No. 23-02-..
Prod.-No. 23-01-..
*) with tension nut Prod.-No. 23004-56B
Other dimensions on request
Spare parts
Spare high-pressure connection hose, 3 m (for Eco series only)
complete with control cable and coupling
Prod.-No.
23010
Spare high pressure connection hose, 5 m
Spare high pressure connection hose, *10 m
Spare high-pressure connection hose, *15 m
23015
Spare high pressure connection hose, 5 m
For APS 110D ( double-acting)
23020
Prod.-No. 23015
23016
23017
Prod.-No. 23020
Note:
The pressure build up is 4 sec longer with 10 m, 6 sec longer with 15 m
Tensioning nut for punch Ø 7 - 24 mm
Tension nut for punches Ø 25 mm (only APS 120)
Tensioning nut for punch Ø 26 mm (on request)
B/78
23004-056A
23004-056B
23004-056C
Prod.-No. 23004-056A
For punch Ø 7 - 24 mm
Prod.-No. 23004-056B
For punch Ø 25 mm

PUNCHING DRILLING CUTTING DEBURRING

Transcription

Similar documents

English Catalog

20 1 2- 1 3 odrsrotoro eo6`m rilo

12,5 MB

ALFRA ROTABEST RB50X Metallkernbohrmaschine Metal

Drilling – Punching – Cutting – Deburring

TI OMAP4430 POP SMT Design Guideline

Alfra Rotabest 32 WD Metal Core Drilling Machine

please the PDF document

Descargar catálogo - Parodi Iluminación

Drilling – Punching – Cutting – Deburring

ALFRA HyDRAUlIC pUNCHER – AEP