Everything necessary for processing. Everything

Transcription

Products
Everything necessary for processing.
Everything necessary for success with corrugated board.
Only a Göpfert is a Göpfert.
First comes a Göpfert. The result:
success with corrugated board.
Mediocrity comes and goes. A Göpfert endures.
Because a Göpfert offers superior engineering
technology, trimmed down to the essentials.
Proven designs which work simply and are intuitive to operate. Robustness which for decades
has defined the standard for durable economy
and efficiency, and which uses only components
supplied by reputable manufacturers. In short:
every Göpfert simply provides more machine. This
is our promise. For precision in flexo printing. For
quality in die cutting, slitting, scoring, cutting and
creasing. For your success with corrugated board.
The Göpfert machine range
Printers
Ovation
Impression
FD Corrugator
4|5
6|7
8|9
Evolution HBL
Evolution
10 | 11
12 | 13
FPS 20/48-50-55
FPS 16/36-45
14 | 15
16 | 17
Boxmaker Maxi
Boxmaker Mini
Boxmaker Jumbo
18 | 19
20
21
Rotary die cutters
Flexo printer slotters
Boxmakers
Basics
Rotary slitters Automatic rotary slitters
Roller die cutter
22
23
23
Caseline BGM CL 11/25 Evolution
Containerline BGM CL 16/36-45
Containerline BGM CL 20/48-50-55 24
24
25
25
BGM Flexo folder gluers
Göpfert
The company
26 | 27
A Göpfert: the cutting edge in daily work.
Intensive development has created
sol
uti
ons
whi
ch
pro
vid
e
the decisive advantage. For example,
the direct servo drive in combination
with vacuum transport. A Göpfert innovation of 1996. Often copied but
never matched, this technology still
sets the standard today.
2|3
Printers
Ovation
Technical data
OVATION 16/20-28
Sheet width max.
The Göpfert Ovation: efficiency and perfection.
Printing that makes an impression. Efficiency that pays off.
The Göpfert Ovation is the flexo post-printer for multi-colour printing of highest quality. The precision direct servo drive and the
vacuum sheet transport guarantee maximum registration accuracy. The automatic print length correction is carried out by APM.
The chamber doctor blade, laser-engraved screen rollers and the ink-conditioning system ensure an optimum printing result.
The units of the Göpfert Ovation are fixed, and every individual shaft is driven directly. The sheet throughput height of 2,200 mm
and the open machine design allow setting while running. Use the Göpfert Ovation offline with the Göpfert stacker or inline, for
example, with a flat-bed die cutter. You can count on high reliability which means longer operating time and greater efficiency.
For successful processing of fine flute to double wall board. With a working width of up to 2,800 mm.
2,000 mm / 2,400 mm /
2,800 mm
Nominal circumference
1,676 mm
Feed depth max.
1,530 mm
Sheet size min.
460 x 650 mm
Print length max.*
1,530 mm
Print width max.
As for sheet width
Material thickness
min./max.
1.4 – 9.0 mm
Board line
2,200 mm
Mech. speed
Max. 10,000 sheets/h
* Depending on mounting system
OVATION 13/21-24
Sheet width max.
Feed depth max.
Sheet size min.
Print length max.*
Print width max.
Material thickness
min./max.
Board line
Mech. Speed
2,100 mm / 2,400 mm
1,382 mm
1,270 mm
460 x 650 mm
1,250 mm
As for sheet width
1.0 – 8.5 mm
2,200 mm
4|5
Printers
Impression
Technical data
The Göpfert Impression: the No. 1 amongst compact machines.
Only the essentials: nothing but efficiency.
Astonishingly capable, surprisingly compact. This is the modular-built Göpfert Impression. A flexo post-printer for impressive
multi-colour printing. With high registration accuracy thanks to direct servo drive and vacuum sheet transport. And a range of options
which further increase the printing quality, such as the chamber doctor blade and laser-engraved anilox rollers. Install the Impression
offline with the Göpfert stacker or inline, for example, with a flat-bed die cutter.
Sheet width max.
1,600 mm / 2,000 mm /
2,400 mm / 2,800 mm
1,676 mm
Feed depth max.
1,530 mm
With skip feed
1,676 mm
Sheet size min.
460 x 650 mm
Print length max.*
1,530 mm
Print width max.
As for sheet width
Material thickness
min./max.
1.4 – 9.0 mm
Board line
1,270 mm
Mech. speed
6|7
Printers
FD Corrugator
Technical data
The Göpfert FD Corrugator: Simply endless printing.
Print width max.
2,500 mm / 2,800 mm
999 mm
Mech. speed
Up to 250 m/min
Print, print, print. Nonstop.
One colour or two? With the Göpfert FD Corrugator the choice is yours. Together with the sure knowledge of easy integration of this central cylinder system into existing corrugator lines. Available in right- or left-hand versions. So colour comes into full play even with
simple qualities – during production of the corrugated board. The reliable and efficient means of finishing.
The Göpfert FD Corrugator also provides maximum registration accuracy thanks to direct servo drive. Even in the standard version, the
FD Corrugator is equipped with chamber doctor blade and laser-engraved anilox rolls for maximum printing quality. The optional sleeve
cylinder enables continuous printing on the paper web. Especially practical: if the FD Corrugator is being maintained or not being used,
it can be easily tracked out of the corrugator.
8|9
Rotary die cutters
Evolution HBL
Technical data
The Göpfert Evolution HBL: performance with ease.
Some want to. Others can. Performance makes the difference.
When the challenges become greater, it is a good feeling to know that you have a Göpfert Evolution HBL on your side. Because this
highboard-line rotary die cutter with fixed units makes no compromises. Designed for rotary die-cut packaging with high-quality multicolour flexo printing. And easy and convenient in use.
Anyone who needs maximum registration accuracy will find it in the Evolution HBL. Backed up by the proven Göpfert technology of
direct servo drive and vacuum sheet transport. Outstanding print qualities are a further trademark of the Evolution HBL, guaranteed by
options such as the chamber doctor blade and laser-engraved anilox rollers.
Sheet width max.
2,000 mm / 2,400 mm /
2,800 mm / 3,200 mm
1,676 mm
Feed depth max.
1,530 mm
With skip feed
1,676 mm
Sheet size min.
460 x 650 mm
Print length max.*
1,530 mm
Print width max.
As for sheet width
Material thickness
min./max.**
1.0 – 9.0 mm
Board line
2,200 mm
Mech. speed
Good for productivity: the board line height of 2,200 mm and the open machine design allow setting during production.
** Max. 16 mm, for machine in HD version with transport rollers
10 | 11
Rotary die cutters
Evolution
Technical data
The Göpfert Evolution: the revolution.
Revolutionary since 1998. And today still ahead of its time.
The Göpfert Evolution has fundamentally shaped the processing of corrugated board like no other machine before or ever since. And
has always set the standard by which others are judged. The result is packaging with brilliant multi-colour printing. With impressive
registration accuracy thanks to direct servo drive and vacuum sheet transport.
Take advantage of the numerous customisation options. For example, the chamber doctor blade and laser-engraved anilox rollers,
to improve print quality even further.
Sheet width max.
2,000 mm / 2,400 mm / 2,800 mm /
3,200 mm / 3,600 mm
1,676 mm
Feed depth max.
1,530 mm
With skip feed
1,676 mm
Sheet size min.
460 x 650 mm
Print length max.*
1,530 mm
Print width max.
As for sheet width
Material thickness
min./max.**
1.4 – 9.0 mm
Board line
1,270 mm
Mech. speed
** Max. 16 mm, for machine in HD version with transport rollers
12 | 13
Flexo Printer Slotter
Technical data
Sheet width max.
4,800 mm / 5,000 mm / 5,500 mm
2,186 mm
Feed depth max.
2,000 mm
With skip feed
Slit spacing min.
2,450 mm
When accurate size is essential.
No format too large, no corrugated board too heavy: the register-driven Göpfert Flexo printer slotters are tough performers. The key to
this extremely tough construction lies in the particularly low maintenance design. A machine that delivers efficiency and productivity
over decades of continuous use.
Symmetrical arrangement
175 / 175 / 175 mm
Asymmetrical arrangement
250 / 100 / 250 mm
Sheet size min.
FPS 20/48 and FPS 20/50
FPS 20/55
700 x 1,000 mm
700 x 1,480 mm
Take advantage of the optional pre-crush station and the double slitting units consisting of two individual slitters, for example, for the
production of octabins.
Sheet size max.
5,500 x 2,450 mm
Print width max.
As for sheet width
Material thickness
min./max.
2 – 16 mm
Board line
1,270 mm
Mech. speed
Max. 6,000 sheets/h
The Göpfert Flexo printer slotter FPS 20/48-50-55: a tough performer when it comes to precision.
14 | 15
Flexo Printer Slotter
Technical data
The Göpfert Flexo printer slotter FPS 16/36-45: a tough performer when it comes to precision.
There are many demanding formats. But no questions when it comes to processing.
Think of the result, not of the machine. Göpfert Flexo printer slotters are designed to produce the maximum in weight and size
with corrugated board. With low maintenance and economy. Like the Göpfert Flexo printer slotter FPS 16/36-45. With a working
width of 3,600 mm in the FPS 16/36 Evolution version with vacuum transport and direct servo drive. Or as the heavy-duty version
FPS 16/36 Evolution HD for heavy board with sheet transport by transport rollers.
The Evolution variants use the same technical equipment as the Evolution, designed for high-quality multi-colour flexo post printing.
And the register-driven Göpfert Flexo printer slotter FPS 16/45 is the specialist for particularly large formats.
Sheet width max.
3,600 mm / 4,500 mm
1,676 mm
Feed depth max.
1,530 mm
With skip feed
Slit spacing min.*
2,100 m
175 / 175 / 175 mm
250 / 55 / 250 mm
Sheet size min.
500 x 770 mm
Board line
1,270 mm
Print width max.
As for sheet width
Material thickness
min./max.**
1.4 – 9.0 mm
Mech. speed***
Max. 6,000 sheets/h
*
The register-driven FPS 16/45 with asymmetrical arrangement has a minimum
slit spacing of 250/100 /250 mm.
** The FPS 16/45 and the servo-driven FPS Evolution HD can process materials up
to a maximum thickness of 16.0 mm.
*** The Evolution variants have a maximum mechanical speed of 10,000 sheets/h.
16 | 17
Boxmaker Maxi
Boxmaker
Technical data
The Göpfert Boxmaker: the Original.
One operation. One finished box. How processing should be.
The Göpfert Boxmaker carries out all production steps in one pass of the sheet: creasing and cutting – lengthwise or transverse,
slitting, die cutting and printing. And of course also the application of stitch tabs. The FEFCO catalogue is available in full for
production. And completely without special tools for quick setting. The Göpfert Boxmaker is ideal for the rational and
efficient processing of large-format sheets in small and medium runs.
Sheet width max.
2,500 mm
Sheet width min.
360 mm
Sheet length max.*
6,000 mm / 8,000 mm
Sheet length min.
1,000 mm
Printing surface max.*
2,200 x 2,500 mm
Die cutting
4 x 200 mm x 200 mm
Material thickness
min./max.
2.5 – 15.0 mm
Setting time
7 – 12 min
* For Maxi inline with FPU flexo print unit
Are heavy qualities the challenge? Then the robust Boxmaker Maxi is the answer. The proof: no fewer than 500 Göpfert Boxmakers
have been installed worldwide since its invention over three decades ago.
18 | 19
Boxmaker Mini
Technical data
Sheet width max.
1,400 mm
Sheet width min.
Manual feed
360 mm
Automatic feeder
400 mm
Sheet length max.
One number smaller. But big in terms of success.
The Göpfert Boxmaker Mini is the logical development of the Maxi and works on the same principle. All processing steps from the
rough sheet to the finished folding box are carried out in only one pass: creasing and cutting – lengthwise or transverse, slitting,
die cutting and printing. And of course also the application of stitch tabs. The box is finished and ready to be closed!
The Göpfert Boxmaker Mini can produce the widest possible range of box designs. Various tools can be fitted to the integrated
die-cutting beam for accurate cut outs or shortened cover flaps. This allows for almost limitless variety in processing.
Forget about complicated setting and take advantage of its unique flexibility and speed: a Göpfert Boxmaker Mini can be set for a new
job in less than 10 minutes.
Boxmaker
Manual feed
Continuous
Automatic feeder
4,000 mm
Sheet length min.
650 mm
Printing surface max.
3 x 200 mm x 300 mm
Die-cutting beam
90 mm x 1,400 mm
Material thickness
min./max.
2 – 7 mm
Setting time
3 – 10 min
Boxmaker Jumbo
Large formats, major challenges. And the answer to them.
With a particularly robust construction, the ideal choice for large formats and heavy qualities: the Göpfert Boxmaker Jumbo for the
rational and efficient processing of small and medium runs. The continuous servo drive ensures the outstanding throughput speed,
making the Göpfert Boxmaker Jumbo highly productive.
The Göpfert Boxmaker Jumbo can be set with unmatched speed. No special tools are required in order to be perfectly prepared at any
time for a wide selection of products from the FEFCO catalogue.
Technical data
Sheet width max.
2,800 mm
Sheet width min.
360 mm
Sheet length max.*
6,000 mm
Sheet length min.
1,000 mm
2,200 x 2,800 mm
Die cutting
4 x 200 mm x 200 mm
Material thickness
min./max.
2.5 – 15.0 mm
Setting time
7 – 12 min
* For Maxi inline with FPU flexo print unit
Characteristic features of every Boxmaker: all processing steps are carried out in one pass, creasing and cutting – lengthwise or transverse, slitting, die cutting and printing. And of course also the application of stitch tabs.
Boxmaker
20 | 21
Basics
Göpfert basic machines: simply reliable for a better result.
The Göpfert rotary slitters KSD 120/26: great for small-scale processing.
Improve your productivity with the extremely robust and low-maintenance Göpfert rotary slitters KSD 120/26. Cut, crease and score
with high precision. The sheets are transported by three continuous pairs of shafts. The advantage: the transport operates independently of the tool shafts.
The operation of the Göpfert rotary slitters KSD 120/26 is intuitive and simple. The calliper setting is carried out centrally and in parallel
via handwheels with integrated scale dials. Common tools and optional air clamping shafts ensure efficient setting. And special KS type
rotary slitters are available for small formats.
Technical data
Sheet width max.
2,600 mm
Sheet length min.
400 mm
Circular blade spacing min.
Symmetrical blade
70 / 70 / 70 mm
Asymmetrical blade
30 / 110 / 30 mm
Standard creaser spacing min.
Symmetrical creaser
60 / 60 / 60 mm
Asymmetrical creaser
30 / 90 / 30 mm
Fine creaser spacing min.
Symmetrical creaser
35 / 35 / 35 mm
Asymmetrical creaser
20 / 65 / 20 mm
Scoring unit
Optional
Scoring speed razor cut
210 %
Scoring spacing min.
27 / 27 / 27 mm
Speed
60 and 120 m/min
Throughput height
800 mm
Material thickness
min./max.*
2 – 12 mm
* For triple wall materials the machine is available as KSD 150/26.
Scoring up to double wall with 7 mm thickness
Kleinverarbeitung
Basics
Göpfert basic machines: simply reliable for a better result.
The Göpfert automatic rotary slitters RSM 3/26: speed is a matter of setting.
Production runs fully automatically with the Göpfert automatic rotary slitters RSM 3/26. An extremely robust and low-maintenance
design for creasing and cutting. And optionally also for the scoring of corrugated board to maximum quality and precision.
The robots of the Göpfert RSM 3/26 move to the position entered by the operator on the screen. So there is absolutely no need of
manual setting of the machine. The setting time is only about 2 minutes. No matter how many creasers, scorers and blades are positioned. The two pairs of creaser shafts enable creaser spacing of 0 mm. The calliper setting is motor-powered.
Technical data
Autom. rotary shears RSM 3/26
Sheet width max.
2,600 mm
Sheet length min.
500 mm
Sheet length max.
with positioner
3,050 mm
Creaser spacing min.
0 – 70 mm
Scoring unit
Optional
Scoring speed razor cut
210 %
Score spacing min.
27 / 27 / 27 mm
Speed
20 – 130 m/min
Throughput height
900 mm
Material thickness
min./max.*
2 – 15 mm
* Scoring up to double wall with 7 mm thickness
Göpfert roller die cutter PRS: simply more possibilities.
The Göpfert roller die cutter PRS is the ideal tool for small runs, samples and the processing of heavy board and oversized special
formats. And perfect to make a start in the field of die-cut packaging, because setting and operation are extremely easy.
Roller die cutter PRS
Sheet width max.
1,700 mm / 2,300 mm /
2,700 mm / 2,900 mm
Sheet length max.
2,200 mm
Power requirement PRS 23
5.5 kW / 400 V / 50 Hz / N / PE
Space requirement PRS 23
6,000 mm x 3,240 mm
22 | 23
BGM: individual and universal.
BGM Bahmüller and Göpfert machines: the very best to meet your objectives.
BGM is the sales company of Bahmüller and Göpfert machines – the specialist for inline systems
worldwide since 1982. And with continual new developments and the experience gained from numerous installations. All well-known companies in the corrugated board industry have BGM machines
in successful use.
BGM Containerline
BGM Caseline
All BGM inline systems consist of the Göpfert print and slotting units and the Bahmüller folder section.
For maximum quality in multi-colour printing and the processing of heavy corrugated board.
Sheet width max.
2,500 mm
Sheet width max.
3,200 mm
1,147 mm
1,300 mm
Feed depth max.
1,050 mm
Feed depth max.
1,200 mm
With skip feed
1,400 mm
With skip feed
1,700 mm
Slit spacing min.
Slit spacing min.
120 / 120 / 120 mm
75 / 175 / 75 mm
125 / 125 / 125 mm
85 / 175 / 85 mm
Sheet size min.
320 mm x 600 mm
Sheet size min.
350 mm x 650 mm
Flap dimensions (L+W) min.
Gluing (L+W) min.
Fold dimensions (L+W) min.
375 mm
375 mm
Gluing
L min. : W min. (symm.)
L min. : W min. (asymm.)
L max. : W max.
120 mm : 175 mm
75 mm : 175 mm
600 mm : 1,080 mm
L min. : W min.
L max. : W max.
125 mm : 175 mm
775 mm : 1,325 mm
Taping
L min. : W min.
L max. : W max.
150 mm : 225 mm
775 mm : 1,325 mm
(L+W) min. : (L+W) min.
L min. : W min.
L max. : W max.
375 mm
150 mm : 225 mm
600 mm : 1,050 mm
Gluing
Taping
Open sheet max.
1,600 mm (unfolded)
Material thickness min./max.
1.1 – 8.5 mm
Print width max.
2,500 mm
Mech. speed
Open sheet max.
1,600 mm (unfolded)
1.4 – 8.5 mm
Print width max.
3,200 mm
Mech. speed
Containerline BGM CL 16/36-45
Containerline BGM CL 20/48-50-55
Sheet width max.
3,600 mm / 4,500 mm
Sheet width max.
4,800 mm / 5,000 mm / 5,500 mm
1,676 mm
2,186 mm
Feed depth max.
1,540 mm
Feed depth max.
2,000 mm
With skip feed
2,100 mm
With skip feed
2,450 mm
Slit spacing min.
175 / 175 / 175 mm
Slit spacing min.
175 / 175 / 175 mm
Sheet size min.
500 mm x 770 mm
Sheet size min.
1,480 mm x 700 mm
Flap dimensions (L+W) min.*
385 mm
Flap dimensions (L+W) min.
500 mm
Gluing
L min. : W min.
L max. : W max.
175 mm : 210 mm
1,050 mm : 1,750 mm
Gluing
L min. : W min.
L max. : W max.
200 mm : 300 mm
1,250 mm : 2,150 mm
Taping
L min. : W min.
L max. : W max.
180 mm : 225 mm
1,050 mm : 1,750 mm
Taping
L min. : W min.
L max. : W max.
200 mm : 300 mm
1,250 mm : 2,150 mm
Inner stitching
L min. : W min.
L max. : W max.
200 mm : 250 mm
900 mm : 1,750 mm
Inner stapling
L min. : W min.
L max. : W max.
250 mm : 350 mm
1,250 mm : 2,150 mm
Open sheet max.**
3,700 mm (unfolded)
Open sheet max.
4,200 mm (unfolded)
Material thickness min./max.***
1.5 – 16 mm
2 – 16 mm
Without skip feed
With skip feed
Printing surface max.
2,000 mm x sheet width
Stitching speed
Single-head stitcher
Tandem stitcher
1,250 stitches/min
2,000 stitches/min
Tape speed
45 – 120 m/min
Mech. speed****
Max. 6,000 sheets/h
Without skip feed
With skip feed
Tandem stitcher speed
2,000 stitches/min
Tape speed
45 – 120 m/min
Mech. speed
Max. 6,000 sheets/h
*
The data apply for the version CL 16/45. The data for the CL 16/36 may vary.
** For the CL 16/36 Evolution 1,800 mm or optionally 3,600 mm
*** Applies for the CL 16/45 or the CL 16/36 Evolution HD.
**** The maximum mechanical speed of the CL 16/36 Evolution is 10,000 sheets/h.
24 | 25
For over six decades.
Göpfert: where one’s own name stands for quality, there can be no compromises.
A good name is both a commitment and a promise: to take personal responsibility for the best, with
dedication and initiative. This was the path taken by Albin Göpfert in 1950. Karl F. Göpfert from
1969 led the six-man business to its present size, to a global presence with over 300 employees.
André Göpfert took over responsibility in the third generation, and continued on the path taken by
his father.
Milestones of the technology.
Again and again it is technical developments which demonstrate the lead. Small ones such as accessibility during ongoing operation, and major ones such as the Boxmaker: designed in the 1970s and
continually developed further since that time, it still sets the standard today. Or the servo technology
developed by Göpfert in the 1990s – which today is still probably the only true direct-drive system.
Produced from A to Z in Wiesentheid in Germany. Or it is not a Göpfert.
All processes from design and development through to actual production take place at Göpfert.
Because responsibility cannot be delegated, but only accepted.
A Göpfert only offers room for the best.
Only proven components are installed – components which define the standard worldwide. From
well-known and reputable partners such as FAG, Festo, Pneumatik, SFK or Siemens. Firstly because
this guarantees that only the most modern and tested quality goes into a Göpfert. Secondly with
a long service life in mind: whatever happens, spare parts from these partners are quickly available
worldwide in consistently high quality.
More machine also means: somebody cares more.
So that you will not have to see the Göpfert service specialists so quickly again. Because what goes
into a Göpfert works. But the good feeling remains of having a contact partner nearby at all times.
Our hotline is manned seven days per week, all round the clock, and does not connect you to some
anonymous call centre, but personally to a Göpfert engineer.
Göpfert – facts and figures.
Dedicated only to quality for over 60 years. Today in over 50 countries throughout the world.
Founded in 1950 in Marktbreit by Albin Göpfert
1969: Karl-F. Göpfert joins the company
1973: Expansion and move to Wiesentheid
1982: Foundation of the sales company BGM
Employees: 300, including
• 20 employees in research an development
• 30 employees as trainees in mechatronics, engineering and administration
Longest customer relationship: 55 years
Development and production: exclusively in Wiesentheid,
Germany, on a developed area of over 23,000 m2
Average service life of a Göpfert: 30 years
Göpfert machines are in service for greater efficiency and
productivity in over 50 countries throughout the world.
As of 10/2010
26 | 27
Göpfert Maschinen GmbH
Am Zollwasen 6
97353 Wiesentheid | Germany
Phone: +49 (0)93 83 205-0
Fax:
+49 (0)93 83 205-43/-66
info@goepfert.de | www.goepfert.de

Everything necessary for processing. Everything

Transcription

Similar documents

ibostar plus. - Daetwyler USA

Order Form

SX GP Universal Examination Table

Brochure - Monkey Tower

Decor Rentals - The White List

has royalty free clip art images to use for business cards or brochures.

Maximum Media / Print Width

SYC-300M - Leadermac USA

2006 touring / recreational / sit-on-top

Street Trees