Instructions

85121 (Rev. B)
Workcenter Table
TT24
QUALITY TOOLS
The TT24 is a replacement table for the original TWC Workcenter table.
It can also be added to your setup when additional workstations are needed,
and can even be used with a Trojan Sawhorse for a stand-alone table surface.
Perfect for performing small tool work, and helping to keep work areas organized.
Features:
16” x 30” work surface.
Made of ¾” MDF.
Powder-coated brackets.
Routed handle for easy carrying.
Set-up:
1) Place over compatible 2X lumber; 2) Tighten both L-screws until snug; 3) Ensure Workcenter Table is
fully secured and there is no risk of detachment from 2X lumber.
!
All applications of the TT24 must be selected and deemed compatible with all relevant
WARNING equipment by a Competent Person. Always take extreme care when operating machine
1-800-231-5647
tools. Never misuse or modify equipment. Never climb or lean on the Workcenter Table.
60 Maple St., P.O. Box 36
Mansfield, MA 02048
www.qualcraft.com