docModel No: 591LF-HGMHDF
download 
Report Transcription
Battery/Hard Wire Lavatory Faucets Innovations® 3 hole 4" centerset battery operated faucet with anti-rotational forged coverplate - open grid strainer - vandal resistant 0.5 gpm laminar outlet H2Optics® technology Model No: 591lf-hgmhdf COMPLIES WITH: SPECIFICATION: • ASME A112.18.1 CSA/B125.1 • ASME A112.18.2 CSA/B125.2 • Indicates compliance to ICC/ANSI A117.1 • Patented • Verified compliant with .25% weighted average Pb content regulations 1: For optimum performance of this product, we recommend a • NOTE system pressure between 20 and 80 PSI static. This product will operate up • Hands free (touchless) on/off activation. • H2Optics® technology. No external adjustments required. • All metal faucet construction. • No lift rod hole. • 0.5 gpm (1.9 L/min) vandal resistant laminar outlet. • 1.5 gpm (5.94 L/min) vandal resistant spray outlet available (RP31705). • Powered by 4 “C” batteries. battery audible beep will activate after faucet shuts off when • Low approximately 1500 cycles remain. • • to a maximum of 125 PSI static per ANSI and CSA requirements. However, we do not recommend pressures above 80 PSI. Thermal expansion or leaking pressure reducing valves may require use of expansion tanks or relief valves to ensure your system never exceeds its maximum intended pressure setting. NOTE 2: Designed for routine 171º F (77ºC) disinfection cycles up to 30 minutes. (Contact Delta Representative for State and/or Local Approvals) with a 45 second maximum run time. Will reset once obstruction • Operates is removed. • Serviceable filter screen upstream of the valve. 591LF Series – 4" (102 mm) centers. 2 1/2" x 7" (64 mm x 178 mm) • Model forged coverplate with locking mechanism (anti-rotation). • Model 590LF Series – Center mount. Single hole installation. to Hardwire using standard transformer (120VAC to 24VAC) • Convertible and Delta converter (24VAC to 6.4VDC) (060683A). to Hardwire with Battery Backup using standard transformer • Convertible (120VAC to 24VAC) and Delta converter (24VAC to 6.4VDC) (061047A). (See DSP-BB for detailed specification). NOTES: Suppled as COMPLETE PRODUCT ONLY • Optional 24" Extension Cable (061298A). • Optional 8" Coverplate for field conversion (RP34280). 591LF Series – 4" (102 mm) centers. 2 1/2" x 7" (64 mm x 178 mm) • Model forged coverplate with locking mechanism (anti-rotation). OPERATION: • Not Available (Dimensional drawing on following page) Delta reserves the right (1) to make changes to specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference. Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area. This spec was produced October 16, 2016. Page 1 of 2 Delta Faucet Company - 55 East 111th St. - Indianapolis, Indiana, USA 46280 - (317) 848-1812 Delta Faucet Canada - 395 Matheson Blvd E - Mississauga, Ontario, Canada L4Z 2H2 - (905) 712-3030 - 1.0.20700 Model No: 591lf-hgmhdf Delta reserves the right (1) to make changes to specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference. Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area. This spec was produced October 16, 2016. Page 2 of 2 Delta Faucet Company - 55 East 111th St. - Indianapolis, Indiana, USA 46280 - (317) 848-1812 Delta Faucet Canada - 395 Matheson Blvd E - Mississauga, Ontario, Canada L4Z 2H2 - (905) 712-3030 - 1.0.20700
Similar documents
QCS-QuickCover-Floor-Wall-expansion-Joint-from-EMSEAL-TD 2014 patented
US Patent 6,532,708
Product Description QuickCover is a rapid install, elegantly simple, aesthetically versatile coverplate system for new and retrofit floor and wall expansion joints.
QuickCover is supplied in 10-LF lengths and is a composite assembly of precompressed foam that flanks a vertical spline descending from an integral coverplate. Installation Summary The assembly is packaged between extruded polystyrene and the precompressed foam is held in compression to less than the intended joint size.
The joint is prepared, a mounting bead of supplied silicone is applied to each joint face and tooled flat, the shrink wrap is removed and the assembly is lowered into the joint.
Weight is applied to the coverplate until the foam has self-expanded into the wet mounting silicone.
Within about one hour the joint is trafficable.
Features • No visible coverplate screws • No visible anchoring fasteners • Flush with floor retrofit into old hardware of failed joint systems • Bridges and conceals cracked adjacent flooring • Resists pedestrian and rolling point loads • Install while occupied using simple traffic diversion • Install after flooring is installed, leveled and completed • Cost effective • Shipped in 10-LF lengths • ADA compliant bevel and coefficient of friction • Rapid installation—new or retrofit • No bolts, anchors, balls, tracks, slides or other fiddly hardware • No blockouts, recesses, or backfilling • Aesthetically and practically versatile Uses Bridges and seals floor and wall joints in new and retrofit construction for schools, hospitals, airports, offices, malls, etc. Movement Capability • Total 100% (+50% and -50%) of nominal material size. Coverplate Material/Finishes • Standard finish is sand-blasted Type 6061 T-6 Aluminum • Other finish options are available and will affect lead time. • Finish options include: Mill Finish; Blast/Anodized; Brush/ Anodized; and Matte Anodized (consult EMSEAL) Standard Sizes US Patent 6,532,708
Precompressed, anchorless, rapid installation floor and wall expansion joint cover.
Joint Size Plate Width Depth 1" (25mm) 1-1/4" (30mm) 1-1/2" (40mm) 4-inch (100mm) 2-1/2" (65mm) 1-3/4" (45mm) 2" (50mm)
2-1/4" (55mm) 2-1/2 (65mm) 2-3/4" (70mm) 5-1/2" (140mm) 2-1/2" (65mm) 3" (75mm)
3-1/4" (80mm) 3-1/2" (90mm) 3-3/4" (95mm) 7" (175mm) 2-1/2" (65mm) 4" (100mm)
