Flat Bleed Rigid Retainer

4
D
ITEM
1
2
79
PART #
K2042
K2204
5175
80
5175
PARTS LIST
DESCRIPTION
Flat Wall Mount Retro Body
Flat Bleed Rigid Retainer
Hinge Screw - #10 x 5/8" Pan Head
3
2
NOTES
Assembly
Assembly
Pre-drill 5/32" pilot hole
every 36" o/c
Closure Screw - #10 x 5/8" Pan Head Pre-drill 5/32" pilot hole
every 48" o/c
Ship To:
Sales Order#
1
79
1" − 3"
D
79
1
2
1
DETAIL A
A
FRAME CLOSED
C
C
2
1
79
80
B
B
ATTACHMENT FASTENER
BY OTHER
2
TOP CROSS-SECTION VIEW
80
NOTE: PRE-CUT KITS ARE NOT PRE-DRILLED.
(Holes shown in this drawing are for reference only.
Drilling of pilot holes are to be done by fabricator.)
THIS DRAWING WAS CREATED AT NO CHARGE TO ASSIST YOU IN VISUALIZING OUR PROPOSAL. THE DRAWING HEREIN
IS THE PROPERTY OF SIGNCOMP. PERMISSION TO COPY OR REVISE THIS DRAWING OR TO USE THIS DRAWING FOR
PRODUCTION IS STRICTLY PROHIBITED AND CAN ONLY BE COPIED, REVISED OR USED FOR PRODUCTION WITH THE
EXPRESSED WRITTEN PERMISSION OF SIGNCOMP.
DRAWING BY:
SBreihof
9/11/2013
Centroid X: 0.000 in
Centroid Y: 0.000 in
A
NOTE: THE FRAME ALIGNS TIGHT
TO THE BODY, SHOWING NO
REVEAL.
80
Principal Moments Ix: 0.000 in^4
Principal Moments Iy: 0.000 in^4
Section Modulus Ix: 0.000 in^3
Section Modulus Iy: 0.000 in^3
4
3
2
TITLE
SignComp
Flat Wall Mount Retro Body w/ Flat Bleed
Rigid Retainer - Assembly
PART NO
REV
K2042-2204
SHEET
1
1
OF
1
A
4
ITEM
1
2
3
D 13
PARTS LIST
PART #
DESCRIPTION
2042 Flat Wall Mount Retro Body
2042 Flat Wall Mount Retro Body
5305 Frame Corner Angle
5218 Corner Angle Screw
3
2
NOTES
Top & Bottom
Sides
One (1) per corner
Pre-drill 5/32" pilot hole
1
1
3
D
3
Ship To:
Sales Order#
13
2
CROSS-SECTION VIEW
1
13
A
3
13
DETAIL A
C
C
13
3
13
2
13
2
2
B
B
1
DETAIL B
NOTE: PRE-CUT KITS ARE NOT PRE-DRILLED.
(Holes shown in this drawing are for reference only.
Drilling of pilot holes are to be done by fabricator.)
13
B
THIS DRAWING WAS CREATED AT NO CHARGE TO ASSIST YOU IN VISUALIZING OUR PROPOSAL. THE DRAWING HEREIN
IS THE PROPERTY OF SIGNCOMP. PERMISSION TO COPY OR REVISE THIS DRAWING OR TO USE THIS DRAWING FOR
PRODUCTION IS STRICTLY PROHIBITED AND CAN ONLY BE COPIED, REVISED OR USED FOR PRODUCTION WITH THE
EXPRESSED WRITTEN PERMISSION OF SIGNCOMP.
DRAWING BY:
SBreihof
8/15/2013
Centroid X: 0.000 in
TITLE
SignComp
Centroid Y: 0.000 in
A
Principal Moments Ix: 0.000 in^4
1
Principal Moments Iy: 0.000 in^4
3
Section Modulus Ix: 0.000 in^3
Section Modulus Iy: 0.000 in^3
4
3
2
Flat Wall Mount Retro Body - Assembly
PART NO
REV
K2042
SHEET
1
1
OF
1
A
4
PARTS LIST
3
2
ITEM PART#
DESCRIPTION
NOTES
1
2204 Flat Bleed Retro Frame
Top & Bottom
2
2204 Flat Bleed Retro Frame
Sides
3
5210 Corner Key
D 82
5168 Flat Bleed Retainer Screw #8 x 1/2" Countersink - Predrill & Countersink 1/8" hole
1
D
82
2
82
Ship To:
Sales Order#
3
1
1
3
82
3
82
C
C
2
DETAIL A
BACK SIDE
82
1
1.1875
.3125
2
B
3
B
1.000
CROSS-SECTION VIEW
NOTE: PRE-CUT KITS ARE NOT PRE-DRILLED.
(Holes shown in this drawing are for reference only.
Drilling of pilot holes are to be done by fabricator.)
A
A
THIS DRAWING WAS CREATED AT NO CHARGE TO ASSIST YOU IN VISUALIZING OUR PROPOSAL. THE DRAWING HEREIN
IS THE PROPERTY OF SIGNCOMP. PERMISSION TO COPY OR REVISE THIS DRAWING OR TO USE THIS DRAWING FOR
PRODUCTION IS STRICTLY PROHIBITED AND CAN ONLY BE COPIED, REVISED OR USED FOR PRODUCTION WITH THE
EXPRESSED WRITTEN PERMISSION OF SIGNCOMP.
DRAWING BY:
SBreihof
8/27/2013
Centroid X: 0.000 in
82
82
SignComp
Centroid Y: 0.000 in
1
Section Modulus Ix: 0.000 in^3
3
Section Modulus Iy: 0.000 in^3
3
2
A
Flat Bleed Rigid Retainer
Principal Moments Ix: 0.000 in^4
Principal Moments Iy: 0.000 in^4
4
TITLE
PART NO
REV
K2204
SHEET
1
1
OF
1
4
ITEM
1
1.3
1.4
D
2
3
3.1
3.2
3.3
PART#
K2204
5210
5168
5285
PARTS LIST
DESCRIPTION
Flat Bleed Rigid Retainer
Corner Key
Flat Bleed Rigid Retainer Screw
3/16" Polycarbonate Pan Face
Rigid Face Hardware
1/4" x 20 Lock Nut
Nylon Bushing
1/4" x 20 x 1" UNC Square Recessed Flat
Countersunk Head Machine Screw - Type III
3
2
1
1
3.3
NOTES
Assembly
2" − 4"
By Other
Assembly - Approx. 18" o/c
D
3.2
3.1
.266  1.000
  .507 X 82.0°
Ship To:
Sales Order#
2
3.3
3.2
A
C
C
DETAIL A-1
1
3.2
3.1
1.3
3.3
1
B
2
1.4
3.1
B
DETAIL A-2
CROSS-SECTION VIEW
ASSEMBLED
NOTE: PRE-CUT KITS ARE NOT PRE-DRILLED.
3.2
(Holes shown in this drawing are for reference only.
Drilling of pilot holes are to be done by fabricator.)
THIS DRAWING WAS CREATED AT NO CHARGE TO ASSIST YOU IN VISUALIZING OUR PROPOSAL. THE DRAWING HEREIN
IS THE PROPERTY OF SIGNCOMP. PERMISSION TO COPY OR REVISE THIS DRAWING OR TO USE THIS DRAWING FOR
PRODUCTION IS STRICTLY PROHIBITED AND CAN ONLY BE COPIED, REVISED OR USED FOR PRODUCTION WITH THE
EXPRESSED WRITTEN PERMISSION OF SIGNCOMP.
DRAWING BY:
2
SBreihof
8/27/2013
Centroid X: 0.000 in
TITLE
SignComp
Centroid Y: 0.000 in
A
4
NOTE: SLOTS SHOULD BE ROUTED INTO THE FACE
FLANGES TO HOLD THE NYLON BUSHINGS.
THESE SLOTS ALLOW FOR EXPANSION AND
CONTRACTION OF THE FACE MATERIAL.
3
Principal Moments Ix: 0.000 in^4
Principal Moments Iy: 0.000 in^4
Section Modulus Ix: 0.000 in^3
Section Modulus Iy: 0.000 in^3
2
Flat Bleed Rigid Retainer Face - Assembly
PART NO
REV
K2204-FACE
SHEET
1
1
OF
1
A