Narrow S/F Body w

4
ITEM
1
2
10
D 11
Parts List
PART#
DESCRIPTION
K2021 Narrow Single Face Body
K2045/65 2-1/4" Retainer w/ Dual Frame
5170
Hinge Screw
5180
Closure Screw
3
2
1
1
NOTES
Assembly
Assembly
Drill 3/8" pilot hole
Drill 5/16" pilot hole
10
2
11
D
A
1
10
DETAIL A
C
2
11
10
1
C
Drive the hinge screw
down into the body so
the head of the screw
is under the retainer
flange as shown.
2
B
B
TOP CROSS-SECTION
NOTE: PRE-CUT KITS ARE NOT PRE-DRILLED.
(Holes shown in this drawing are for reference only.
Drilling of pilot holes are to be done by fabricator.)
THIS DRAWING WAS CREATED AT NO CHARGE TO ASSIST YOU IN VISUALIZING OUR PROPOSAL. THE DRAWING HEREIN
IS THE PROPERTY OF SIGNCOMP. PERMISSION TO COPY OR REVISE THIS DRAWING OR TO USE THIS DRAWING FOR
PRODUCTION IS STRICTLY PROHIBITED AND CAN ONLY BE COPIED, REVISED OR USED FOR PRODUCTION WITH THE
EXPRESSED WRITTEN PERMISSION OF SIGNCOMP.
11
DRAWN
Sarah
11
Centroid Y: 0.000 in
A
Principal Moments Ix: 0.000 in^4
11
4
Ship To:
Order Number:
Principal Moments Iy: 0.000 in^4
Section Modulus Ix: 0.000 in^3
Section Modulus Iy: 0.000 in^3
3
2
SignComp
4/30/2012
Centroid X: 0.000 in
TITLE
Narrow Single Face Body w/ 2-1/4" Retainer A
- Assembly
DWG NO
REV
K2021-45
SHEET
1
1
OF
1
4
ITEM
1
2
3
D 13
Parts List
PART#
DESCRIPTION
2021
Narrow Single Face Body
2021 Narrow Single Face Body
5321 Narrow Body Corner Angle
5218
Corner Angle Screw
3
2
1
Ship To:
NOTES
Top & Bottom
Sides
Order Number:
3
1
2
D
Drill 5/32" pilot hole
13
3
13
A
13
13
C
DETAIL A
C
13
13
13
2
3
2
1
B
B
13
DETAIL B
13
NOTE: PRE-CUT KITS ARE NOT PRE-DRILLED.
(Holes shown in this drawing are for reference only.
Drilling of pilot holes are to be done by fabricator.)
13
13
3
13
THIS DRAWING WAS CREATED AT NO CHARGE TO ASSIST YOU IN VISUALIZING OUR PROPOSAL. THE DRAWING HEREIN
IS THE PROPERTY OF SIGNCOMP. PERMISSION TO COPY OR REVISE THIS DRAWING OR TO USE THIS DRAWING FOR
PRODUCTION IS STRICTLY PROHIBITED AND CAN ONLY BE COPIED, REVISED OR USED FOR PRODUCTION WITH THE
EXPRESSED WRITTEN PERMISSION OF SIGNCOMP.
DRAWN
Sarah
SignComp
4/30/2012
Centroid X: 0.000 in
TITLE
Centroid Y: 0.000 in
A
Principal Moments Ix: 0.000 in^4
B
1
Principal Moments Iy: 0.000 in^4
Section Modulus Ix: 0.000 in^3
Section Modulus Iy: 0.000 in^3
4
3
2
A
Narrow Single Face Body - Assembly
DWG NO
REV
K2021
SHEET
1
1
OF
1
4
D
Parts List
PART #
DESCRIPTION
NOTES
2045 2-1/4" Retainer
Top & Bottom
2045
2-1/4" Retainer
Side
5210
Corner Key
5305 Frame Corner Angle
2065
Dual Frame
Side
2075
Dual Frame Cover
Side
5195
Cover Screw
Pre-drill 3/32" pilot hole
5218
Corner Angle Screw
Drill 5/32" pilot hole
ITEM
1
2
3
4
5
6
12
13
3
2
1
OUTER FRAME CORNER
ANGLES FLOAT IN THE
FRAME
4
D
12
5
6
4
13
6
13
1
4
A
C
C
DETAIL A
4
3
3
4
13
13
5
1
13
4
6
13
1
13
2
B
DETAIL B
12
2
4
B
DETAIL C
4
NOTE: PRE-CUT KITS ARE NOT PRE-DRILLED.
13
B
3
CORNER KEY HELPS
ALIGN MITRE AND
ADDS STRENGTH
A
Ship To:
Order Number:
4
THIS DRAWING WAS CREATED AT NO CHARGE TO ASSIST YOU IN VISUALIZING OUR PROPOSAL. THE DRAWING HEREIN
IS THE PROPERTY OF SIGNCOMP. PERMISSION TO COPY OR REVISE THIS DRAWING OR TO USE THIS DRAWING FOR
PRODUCTION IS STRICTLY PROHIBITED AND CAN ONLY BE COPIED, REVISED OR USED FOR PRODUCTION WITH THE
EXPRESSED WRITTEN PERMISSION OF SIGNCOMP.
DRAWN
Sarah
3
Centroid Y: 0.000 in
Principal Moments Iy: 0.000 in^4
Section Modulus Ix: 0.000 in^3
Section Modulus Iy: 0.000 in^3
2
SignComp
3/5/2012
Centroid X: 0.000 in
Principal Moments Ix: 0.000 in^4
1
C
(Holes shown in this drawing are for reference only.
Drilling of pilot holes are to be done by fabricator.)
TITLE
2-1/4" Retainer w/ Dual Frame and Cover - A
Assembly
DWG NO
REV
K2045-65
SHEET
1
1
OF
1