Course - Faculty of Engineering, University of Malaya

Transcription

Guidebook for
UNDERGRADUATE
SESSION2014/2015
BACHELOR OF ENGINEERING (ENVIRONMENTAL)
DEPARTMENTOFCIVILENGINEERING
FACULTYOFENGINEERING,UNIVERSITYOFMALAYA
GUIDEBOOK FOR UNDERGRADUATE
DEPARTMENT OF
CIVIL ENGINEERING
ACADEMIC SESSION 2014/2015
Table of Contents
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
UM Statements: Mission, Vision and Core Values
Faculty of Engineering Statements: Mission,
Vision, Student and Academic Programmes
Message From The Dean
Management Team
Administrative Staff
Academic Schedule
Prohibition Against Plagiarism
Engineering Library
Brief Profile of Department
Introduction of Outcome Based Education (OBE)
Programme Educational Objectives (PEO) And
Programme Outcomes (PO)
Academic Staff
Supporting Staff
Curriculum Structure
Academic Planner
Requirements For Graduation
Course Pro-Forma
University of Malaya STATEMENTS
Mission
To advance knowledge and learning
through quality research and
education for the nation and for
humanity
Vision
To be an internationally renowned
institution of higher learning in
research, innovation, publication
and teaching
Core values
*Integrity *Respect * Social
* Responsibility * Open-mindedness
* Academic Freedom * Professionalism
* Accountability * Teamwork
*Creativity *Meritocracy
Faculty of Engineering STATEMENTS
Mission
To advance engineering knowledge and learning
through quality education and research in the
pursuit of fulfilling the aspirations of the University and nation .
To be an internationally renowned Faculty of Engineering in research , innovation , publication
and teaching.
Quality Products






Produce highly competent and skilled individuals with leadership qualities and good interpersonal skills.
Produce good citizens who respect universal
human values.
Produce students with diverse backgrounds
who respect and internalize diversity.
Produce students incalculated with social
awareness and obligation values.
Produce students with international outlook
and outreach.
Produce highly competent engineers capable
of identifying, formulating, and solving problems in a creative and innovative manner.
Vission
Academic
Programmes

Ensure academic programmes are
relevant, current, innovative and internationally recognized to meet national and global needs.

Continuously develop academic programmes that inspire and tap student’s potential.

Ensure academic programmes are
accredited by local and international engineering professional bodies.

Continuously develop programmes
that are relevant to industrial requirements.
Message from the DEAN
Assalamualaikum w.b.t and warm greetings
Welcome to the Faculty of Engineering
E
ngineering education at the tertiary
level began in Malaysia in 1956 with the establishment of the Engineering Department at University of Malaya’s Bukit timah campus in Singapore. Only a Bachelor Degree
course in Civil Engineering was offered then. The
department was upgraded to a faculty when University of Malaya relocated to its campus in Lembah Pantai in 1958.
In the same year, the second bachelor degree
course in Mechanical Engineering was introduced.
A year later, a Bachelor Degree course in Electrical
Engineering was added to the number of courses
available to undergraduates.
In 1970, the Faculty introduced the fourth course,
a bachelor degree in Chemical Engineering. All four
courses were turned into respective departments
in 1974. In the 1996/97 session, the Faculty introduced six other courses namely in Telecommuncation Engineering, Environmental Engineering, Materials Engineering, Computer Aided Design and Manufacturing Engineering and Biomedical Engineering.
To-date, the Faculty has six departments, Civil Engineering, Biomedical Engineering, Chemical Engineering, Electrical Engineering, Mechanical Engineering and Engineering Design & Manufacture.
The Faculty now offers 12 programmes, with the
lates addition of the Bachelor of Biomedical Engineering (Prosthetics and Orthotics) which was introduced in the 2009/2010 session.
All engineering courses, offered by University of
Malaya, have been accredited by the Engineering
Accreditation Council (EAC), the Board of Engineers,
Malaysia (BEM) in order for all undergraduate engineering students to register with them, upon grad-
uation. All programmes have been structured such,
that they meet the nation and the stakeholder’s
vision of producing responsible, multi-talented and
highly qualified engineers of excellent leadership
quality. This is evident from the Programme Outcome and Programme Educational Objectives
mapped out for each course offered.
In line with the global tertiary education scenario,
efforts are in place to drive the Faculty towards excellence and to ensure that the human capital produced
by the university meets current needs.
Towards this direction, the Faculty has adopted the
National Tertiary Education Strategic Plan and inputs
from various stakeholder programmes as the basis to
improve the quality, competitiveness and creativity
of each course offered. As a preliminary step to ensure that all courses offered are relevant to market
needs, the Faculty is reviewing the overall curriculum
in order to produce engineering graduates of high
calibre.
PROFESOR IR.DR. NOOR AZUAN BIN ABU OSMAN
Dekan
The Management TEAM
DEAN
Prof. Ir. Dr. Noor Azuan Bin Abu Osman
E: azuan@um.edu.my
DEPUTY DEAN
(POSTGRADUATE STUDIES)
Assoc. Prof. Dr. Hazlie Mokhlis
E: hazli@um.edu.my
DEPUTY DEAN
(UNDERGRADUATE STUDIES)
Prof. Ir. Dr. Abdul Aziz Bin Abdul Raman
E: azizraman@um.edu.my
DEPUTY DEAN (DEVELOPMENT)
Dr. Noor Azizi Bin Mardi
E: azizim@um.edu.my
DEPUTY DEAN (RESEARCH)
Prof. Ir. Dr. Ramesh Singh
E: ramesh79@um.edu.my
HEAD OF DEPARTMENT
MECHANICAL ENGINEERING
Prof. Dr. Masjuki Hj. Hassan
E: masjuki@um.edu.my
HEAD OF DEPARTMENT
CIVIL ENGINEERING
Prof. Ir. Dr. Mohd Zamin Bin Jumaat
E: zamin@um.edu.my
HEAD OF DEPARTMENT
CHEMICAL ENGINEERING
Prof. Ir. Dr. Mohd Azlan Hussain
E: mohd_azlan@um.edu.my
HEAD OF DEPARTMENT
ELECTRICAL ENGINEERING
Prof. Dr. Hamzah Bin Arof
E: ahamzah@um.edu.my
HEAD OF DEPARTMENT
BIOMEDICAL ENGINEERING
Dr. Ahmad Khairi Abdul Wahab
E: khairi@um.edu.my
Office DIRECTORY
DEAN’S OFFICE
T: (603) - 7967 5200
F:(603) - 7967 1378
DEPUTY DEAN’S OFFICE
(DEVELOPMENT)
T: (603) - 7967 5202
F:(603) - 7967 7621
DEPARTMENT OF
CIVIL ENGINEERING
T: (603) - 7967 5203
F:(603) - 7967 5318
DEPARTMENT OF
ELLECTRICAL ENGINEERING
T: (603) - 7967 5205
F:(603) - 7967 5316
T: (603) - 7967 5201
F:(603) - 7967 5781
(RESEARCH)
T: (603) - 7967 4471
F:(603) - 7967 4478
DEPARTMENT OF
BIOMEDICAL ENGINEERING
T: (603) - 7967 4581
F:(603) - 7967 4579
DEPARTMENT OF
MECHANICAL ENGINEERING
T: (603) - 7967 5204
F:(603) - 7967 5317
(POSTGRADUATE STUDIES)
T: (603) - 7967 4471
F:(603) - 7967 4478
DEPARTMENT OF
CHEMICAL ENGINEERING
T: (603) - 7967 5206
F:(603) - 7967 5319
Administrative STAFF
ACTING PRINCIPAL ASSISTANT REGISTRAR /
SENIOR ASSISTANT REGISTRAR (POSTGRADUATE)
Mrs. Shahzatul Ermiza Johol
E: ermiza@um.edu.my
T: (603) - 79675356
F: (603) - 79561378
ASSISTANT REGISTRAR (UNDERGRADUATE)
Ms. Salbiah Samsudin
E: ssalbiah@um.edu.my
T: (603) - 79677636
F: (603) - 79561378
FINANCE OFFICER
Mrs. Siti Farhah Marhaini Binti Zainal Abidin
E: farhah_marhaini@um.edu.my
T: (603) - 79675225
F: (603) - 79561378
Academic Schedule SESSION 2014/2015
Induction
01.09.2014 – 07.09.2014
1 week
Lecture Week
08.09.2014 – 17.10.2014
6 weeks *~
18.10.2014 -26.10.2014
1 week@#
Lecture Week
27.10.2014 – 19.12.2014
8 weeks
Study Week
20.12.2014 – 28.12.2014
1 week+
Examination
29.12.2014 – 16.01.2015
3 weeks∧>
Semester Break
17.01.2015 – 22.02.2015
5 weeks©
Mid-Semester Break / Special Break
25 WEEKS
SEMESTER 1
Lecture Week
23.02.2015 – 10.04.2015
7 weeks
Mid-Semester Break
11.04.2015 – 19.04.2015
1 week
Lecture Week
20.04.2015 – 05.06.2015
7 weeks
Study Week
06.06.2015 – 14.06.2015
1 week
Examination
15.06.2015 – 03.07.2015
3 weeks
19 WEEKS
SEMESTER 2
Session break / special semester
Semester Break
Lecture and Examination
*
~
@
#
+
∧
>
<
©
04.07.2015 – 06.09.2015
9 weeks
04.07.2015 -28.08.2015
8 weeks
OR
Hari Malaysia
Hari Raya Aidil Adha Public Holiday
Deepavali Public Holiday
Maal Hijrah Public Holiday
Christmas Public Holiday
New Year Public Holiday
Maulidur Rasul Holiday
Thaipusam
16.09.2014
05.10.2014
23.10.2014
25.10.2014
25.12.2014
01.01.2015
03.01.2015
03.02.2015
Chinese New Year Public Holiday
19 & 20.02.2015
Prohibition Against PLAGIARISM
extract from University of Malaya (Discipline of Students) Rules 1999
(1)
A student shall not plagiarize any idea/writing, data or invention belonging to another person.
(2)
For the purposes of this rule, plagiarism includes:a) the act of taking an idea, writing, data or
invention of another person and claiming that
the idea, writing, data or invention is the result
of one’s own findings or creation; or
(3)
b) an attempt to make out or the act of making out,
in such a way that one is original source or the
creator of an idea, writing, data or invention
which has actually been taken from some other
resources
Without prejudice to the generality of sub-rules (2) a student plagiarizes when he
a) publishes, with himself as the author, an
abstract, article, scientific or academic paper
or book which is wholly or partly written by
some other person;
b) incorporates himself or allows himself to be
incorporated as a co-author of an abstract,
article, scientific or academic paper, or book,
when he has not at all made any written
contribution to the abstract, article, paper, or
book;
c) forces another person to include his name in the
list of co-researchers for a particular research
project or in the list of co-authors for a
publication when he has not made any
contribution which may qualify him as a coresearcher or co-author;
d) extracts academic data which are the results of
research undertaken by some other person, such
as laboratory finding or field work findings or
data obtained through library research, whether
published or unpublished, and incorporate those
data as part of his academic research
Without Giving due acknowledgement
to the actual Source;
e) uses research data obtained through
collaborative work with some other person,
whether or not that other person is a staff
member or a student of the University, as part of
another distinct personal academic, research of
his, or for a publication in his own name as sole
author without obtaining the consent of his
personal research or prior to publishing the data;
f)
transcribes the ideas of creations of others kept
in whatever form whether written, printed or
available in electronic form, or in slide form, or in
whatever form of teaching or research apparatus
or in any other form, and claims whether directly
or indirectly that he is the creator of that idea or
creation;
g) translates the writing or creation of another
person from one language to another whether or
not wholly or partly, and subsequently presents
the translation in whatever form or manner as
his own writing or creation; or
h) extracts ideas from another person’s writing or
creation and makes certain modification due
reference to the original source and rearranges
them in such a way that it appears as if he is the
creator of those ideas.
Engineering LIBRARY
Introduction
The Engineering Library is situated on level 6, Laboratory Wing of the Engineering Tower at the Faculty of
Engineering. It started out as a Reading Room at the Faculty of Engineering. In 1985 this library was absorbed
under the University of Malaya Library System and is known as the Engineering Library. The library provides
services and facilities for lecturers, researchers, students and staffs of the Engineering Faculty, including the
Faculty of Built Environment. This library also open to all students in campus, and registered members of the
UM Library.
General Collection
This library has a general collection of text and reference books, encyclopaedias, dictionaries, manuals, guide
books and technical reports. A large portion of the collection can be borrowed.
Books in this library are
arranged according to subject
matter, based on the Library of
Congress Classification System,
i.e. according to alphabetical
order.
Final Year Project Reports, Dissertations and Thesis
The collection is the result of research undertaken by students of the
Faculty of Engineering. A large portion of the collection is the Final Year
Project Report. The collection is used for reference purposes only.
Standards
This library has a collection of standards including that of, the British Institute (BSI) (until the year 2000),
some Malaysian standards from the Standards Industrial Research Institute of Malaysia (SIRIM), and other
standards such as the American Standards for Testing Material (ASTM). These standards are arranged
according to the index arrangement provided by the issuing bodies for these standards, such as the British
Standards Institute or SIRIM. These standards are for reference purpose only.
Audio Visual Materials
The audio visual material available at the Library include film rolls, film strips, diskettes, compact discs,
audio tapes, videos and slides on topic related to Engineering and Architecture. Facilities to view these
materials are provided by the library.
Loans
All registered students are allowed to borrow from the library.
USER CATEGORIES
Postgraduate Student
Undergraduate Student
NO OF BOOKS
6
4
PERIOD OF LOAN
14 days
7 days
Renewal of reading materials can be done through the internet (Pendeta Web PAC) according to the rules
and regulations.
Inter-Library Loan Service
The facility is available to lecturers, researchers and postgraduates at the Faculty of Engineering. This facility
is to allow them to obtain articles which are not available in the UM Library collection. Service conditions are
according to the rules stated.
Information Services
The Library offers reference and information services. This includes attending to queries and obtaining
information from the database for users of UM Library within and outside the campus.
User Services
Induction programmes are conducted at the Main Library and Engineering Library at the beginning of each
academic session. The main aim of this programme is to introduce the use of the Online Public Access
Catalogue, Pendeta Web PAC, and library facilities to new students. Special information search sessions are
also offered to postgraduate students, lecturers and staffs from time to time. In these sessions, emphasis is
given to the use of Pendeta Web PAC, CD-ROM and online database to search for reference materials in
engineering and related fields.
Electronic Sources (online access via internet)
The UM Library subscribes to a number of online databases, including those related to engineering.
Registered library users may access these databases via the UM Library website http://www.umlib.edu.my,
in the ‘online databases’ section. The user is required to key in the ‘user ID’ before being allowed to access.
Catalogues in the online Engineering Library are a part of the online catalogue of the UM Library and
may be accessed through the UM Library website http://www.pendetaumlib.um.edu.my.
Service Hours
Monday – Thursday
Friday
8.30 am – 5.30 pm
8.30 am – 12.30 noon
2.45 pm – 5.30 pm
The library is closed on Saturday, Sunday and Public Holiday
For enquiries please contact
Mrs. Adida Md Amin
Librarian
Engineering Library
University of Malaya
50603 Kuala Lumpur
T: (603)-7967 4591
F: (603)-7967 5259
E: adida@um.edu.my
BRIEF PROFILE
CIVIL ENGINEERING
DEPARTMENT OF
The Department of Civil Engineering is one of the first academic
departments set up under the Faculty of Engineering. It currently offers two
academic programs at undergraduate level and post graduate research
qualifications at Master of Engineering Science and Doctor of Philosophy
levels.
The department is sub-divided into six major sections within the
Department namely, Structural and Materials Engineering, Environmental
Engineering, Geotechnical Engineering, Transportation Engineering and
Surveying, Water Engineering, and Construction Management and
Mathematics, and is actively engaged in R&D works with financial support
from the University, Government and other industrial grants. Many
academic members of the Department are also pursuing engineering
consultancies requiring expertise in multidisciplinary areas.
The BEng (Civil) programme was introduced in the year 1956 as a 4-year
programme under the Term System. The programme was recognised by the
Malaysian Public Services Department (JPA) and the Board of Engineers
Malaysia (BEM). In the 1996/97 academic session, a major change was
undertaken in the programme where the BEng (Civil) programme was
offered as a 3-year degree programme under the Semester System (Sistem
Pengajian Tiga Tahun, SPTT).
In the same academic session,
the BEng (Environmental)
programme was introduced as a
3-year degree programme under
the Semester System. Both the
programmes were accredited by
the Board of Engineers Malaysia
on the 21 August 2000.
Starting from the academic
session of 2000/01, under the
instructions from the Ministry of
Education of Malaysia, both the
degree programmes were
offered as a 4-year degree
programme under the Semester
System (Sistem Pengajian Empat
Tahun, SPET). The first batch of
graduates from these
programmes graduated in August
2004.
INTRODUCTION OF
OUTCOME-BASED
EDUCATION (OBE)
Outcome-Based Education (OBE) had been
implemented in the Faculty of Engineering
since 2004, in accordance with the directives
of the Ministry of Higher Education and the
Board of Engineers, Malaysia (BEM). This is
also one of the requirements for Malaysia to
become a full member of the Washington
Accord, an international agreement to
mutually recognize Bachelor degrees in
engineering. The implementation of OBE, as
outlined below, is based on guidelines
prescribed by the Engineering Accreditation
Council (EAC) of Malaysia.
Unlike the traditional teacher-centred
method, OBE is an educational approach that
is more concerned about the outcome (what
students can do) rather than the process
(what instructors did). This is believed to
enhance learning, and hence produce better
graduates. For OBE to be successful, it is
critical to prescribe the expected outcomes, to
measure them objectively, and to take
corrective actions where required.
The outcomes are prescribed at two levels:
(a) Course Outcomes (CO) --- what students
should be able to perform at the end of
each course
(b) Programme outcomes (PO) --- a
composite set of abilities after students
finished all courses
All COs will contribute to some of the POs.
This is to ensure that upon completion of the
courses, all POs are sufficiently covered.
Programme Educational
Objectives (Peo)
The PEO is a set of objectives that the academic programme aspires
that the graduates would achieve in their career and professional life a
few years after graduation.
To guide the formation and fine-tuning of these outcomes, the
Department has formulated the Programme Educational Objectives
(PEO). These are aspirations for graduates to attain 3 to 5 years upon
graduation. The POs are designed to produce graduates who are wellprepared to achieve these PEOs.
The PEOs and POs had been formulated in consultation with all major
stakeholders (employers, alumni and students), to meet the demands
of a challenging and globalized workplace. Any material changes will
also require their views.
A critical component of OBE is the objective measurement of the
outcomes. This is done via multiple channels and methods. At the
course level, there is formative assessment via discussion, assignment,
quizzes etc., in addition to the summative assessment in the final
examination. Students also have the opportunity to provide feedback
through course evaluation, meetings with their academic advisors,
annual surveys, and student-lecturer meetings.
Opinions and
feedback from external parties, e.g. employers, alumni, Industrial
Advisory Panel, are also routinely sought to further calibrate the
outcome measurements.
Based on the input and trends received, the Department will take the
necessary corrective actions, and the results monitored. In short, OBE
is a dynamic, student-centred educational process which incorporates
continuous improvement.
PROGRAMME OUTCOMES (PO)
PO 1
Apply knowledge of mathematics, science, engineering
fundamentals and Environment Engineering specialization
to solve complex engineering problems.
PO 2
Identify, formulate, research, analyse and reach
substantiated conclusions along with recommendations for
complex Environment Engineering problems, using
principles of mathematics, natural science and engineering
science.
PO 3
Develop solutions for complex Environment Engineering
systems, components or processes to meet specified needs
with appropriate consideration for public health and safety,
culture, society and the environment.”
PO 4
Conduct investigations using relevant research
methodology including literature review, design of
experiments, analysis and interpretation of results to derive
scientifically sound conclusions
PO 5
PEO 2 Exhibit aptitude for continual
professional development and
lifelong learning.
Utilize systematic approach to select/create appropriate IT
tools, with full understanding of their limitations, to model,
simulate and solve complex Environment Engineering
problem.
PO 6
PEO 3 Possess leadership and
communication skills and
creativity, conducive to effective
entrepreneurial awareness.
Apply reasoning informed by contextual knowledge to
assess societal, health, safety, legal and cultural issues and
the consequent responsibilities relevant to professional
engineering practice
PO 7
Understand the impact of professional engineering
solutions towards society and the environment, and
demonstrate knowledge of and the need for sustainable
development.
PO 8
Apply norms of professional engineering practice ethically.
PO 9
Communicate effectively on complex engineering activities
with both engineers and the community at large through
discussions, reports and presentations.
PO 10
Function effectively as an individual, and as a team member
or leader in a multi-disciplinary environment.
PO11
Recognise the need to undertake life-long learning and
possess the capacity to do so independently.
PO12
Demonstrate knowledge and understanding of engineering
and management/finance principles and apply these to
one’s own work as an individual, team member or leader in
a multi-disciplinary environment.
PROGRAMME EDUCATIONAL
OBJECTIVES (PEO)
PEO 1 Attain competent professional
attributes, equipped with sound
engineering knowledge, for the
well-being of human kind and in
harmony with the environment.
SOFT SKILLS







Communication skills
Critical Thinking and Problem
Solving Skills
Team Work Skills
Life-long Learning and
Information Management
Entrepreneurial Skills
Professional Ethics and Moral
Leadership Skills
14
PROFILE DIRECTORY
ACADEMIC STAFF
DEPARTMENT OF CIVIL ENGINEERING
Academic Staff
Ir. Dr. Mohd Zamin Jumaat
BSc. (Hons.) Civil Engineering, MSc. (Advanced Structural Engineering), PhD. (Structural
Engineering). (Southampton), MIEM, P.Eng
HEAD OF DEPARTMENT / PROFESSOR
Specialization Structural and Materials Engineering
Tel 03-79675203 Email zamin@um.edu.my
Dr. Hashim Abdul Razak
PROFESSOR
Tel 03-79675233 Email hashim@um.edu.my
Dr. Hilmi Mahmud
B.Sc. (Civil Eng.) (Hons) (Loughborough), M.Eng. (Civil & Struc. Eng.) (Sheffield),
Ph.D. (Concrete Tech.) (Sheffield)
PROFESSOR
Tel 03-79675359 Email hilmi@um.edu.my
Dr. Md. Ghazaly Shaaban
B.Sc. (Chem. Eng.) (Hons) (Leeds), M.Sc. DIC (Civil Eng.) (London),
Ph.D. (Civil Eng.) (Newcastle)
PROFESSOR
Specialization Environmental Engineering
Tel 03-79675357 Email ghazaly@um.edu.my
Ir. Dr. Mohamed Rehan Karim
B.Sc. (Civil Eng.) (Hons) (Leeds),
M.Sc. (Transportation Eng.) (Oklahoma State Univ.), MIEM, P.Eng
PROFESSOR
Specialization Transportation Engineering
Tel 03-79675339 Email rehan@um.edu.my
Academic Staff
B.Sc. (Civil Eng.) (Hons) (Salford), M.Sc. (Bridge Eng.) (Surrey), Ph.D. (Struct. Eng.)
(Surrey)
Ir. Dr.Roslan Hashim
B.Sc. (Civil Eng.) (Hons) (Leeds), Ph.D. (Geotech.Eng.) (Sheffield), MIEM, P.Eng.
PROFESSOR
Specialization Geotechnical Engineering
Tel 03-79675269 Email roslan@um.edu.my
Academic Staff
Dr. Shaliza bt Ibrahim
B.Sc. (Chem Eng.) (Texas A&M), M.Sc. (Chem Eng.) (PSU), Ph.D. (Chem. Eng.)
(Birmingham)
PROFESSOR
Tel 03-79674458 Email shaliza@um.edu.my
Dr. Min Jang
B.Sc. (Kwangwoon University, Seoul, Republic of South Korea , M.Sc. Kwangwoon
University, Seoul, Republic of South Korea), Ph.D. University Of Wisconsin, Madison)
PROFESSOR
Tel 03-79677649 Email minjang@um.edu.my
Ir. Dr. Ismail Othman
B.Sc. (Civil Eng.) (Hons) (Manchester), M.Sc. (Civil Eng.) (Soton), Ph.D. (Civil Eng.)
(Soton), MIEM, P.Eng.
CONSULTANT
Tel 03-79673556 Email ismail5353@um.edu.my
Engr. Dr. Lai Sai Hin
B.Eng. (Hons) (UPM), M.Sc. (UPM), Ph.D. (Hydraulic) (UNIMAS), Grad.IEM
ASSOCIATE PROFESSOR
Specialization Hydraulic and Water Engineering
Tel 03-79676859 Email laish@um.edu.my
Dr. Sumiani Yusoff
B.Eng. (Civil Eng.) (Hons) (UTM), M.Sc. (Civil Eng.) (Strathclyde),
Ph.D. (Environmental Eng. & Management) (Malaya)
ASSOCIATE PROFESSOR
Tel 03-79675285 Email sumiani@um.edu.my
Dr. Zubaidah Ismail
B.A. (Maths.) (Hons) (SUNY), M.A (Maths.) (Temple U), Ph.D. (Civil Eng.) (Malaya)
Specialization Mathematics
Tel 03-79675284 Email zu_ismail@um.edu.my
Dr. Zakaria Harun
B.Sc. (Civil Eng.) (Hons) (UMIST), M.Sc. (Constr. Mgt.) (Leeds), Ph.D. (Constr. Mgt.)
(Leeds)
ASSOCIATE PROFESSOR
Specialization Construction Management
Tel 03-79675355 Email zakariaharun@um.edu.my
Engr. Dr. Faridah Othman
B.Sc. (Civil Eng.) (Missouri), M.Sc. (Hydraulic Eng.) (Newcastle), Ph.D. (Hydraulic Eng.)
(Newcastle), Grad.IEM
ASSOCIATE PROFESSOR
Specialization Environmental Hydraulic and Water Resources Engineering
Tel 03-79674584 Email faridahothman@um.edu.my
Engr. Dr. Nor Hafizah Ramli @ Sulong
B.Eng. Hons. (Civil Eng.) DIC (London) , Ph.D. (Malaya), Grad.IEM
ASSOCIATE PROFESSOR
Tel 03-79676884 Email hafizah_ramli@um.edu.my
Academic Staff
ASSOCIATE PROFESSOR
Dr. Aishah Abu Bakar
B.Sc. (Civil Eng.) (Hons) (Dundee), M.Sc. (Civil Eng.) (Dundee), Ph.D. (Geotechnical Eng.)
(Manchester)
SENIOR LECTURER
Specialization Geotechnical Engineering
Tel 03-79675302 Email aishah_ab@um.edu.my
Academic Staff
Dr. Chai Hwa Kian
BEng. (Hons) (Civil Eng.) (USM), M.Eng.Sc. (Concrete Materials) (Malaya),
Ph.D. (Civil Eng.) (Osaka)
SENIOR LECTURER
Tel 03-79677652 Email hkchai@um.edu.my
Sr. Mokhtar Azizi Mohd Din
B.Surv. (Land) (Hons) (UTM), M.Sc. (Surv.) (Nottingham)
SENIOR LECTURER
Specialization Engineering Surveying
Tel 03-79675232 Email mokhtarazizi@um.edu.my
Dr. Ubagaram Johnson Alengaram
B.Eng. (Civil Eng) ( University of Madras, India), M.Eng. (Structural Eng) (Bharathiar ),
Ph.D. (Structural Engineering) (Malaya)
SENIOR LECTURER
Tel 03-79677632 Email johnson@um.edu.my
Dr. Zainah Ibrahim
B.Eng. (Civil Eng.) (Middlesex), M.Sc. (Eng.) (Structural Eng.) (Liverpool), Ph.D. (Civ Eng)
(Sheffield)
SENIOR LECTURER
Tel 03-79674460 Email zainah@um.edu.my
Dr. Maan Hayyan Al-Razouk
B.Sc. (Chemical Engineering) University of Technology-Baghdad, IraqUniversity), M.Sc.
(Chemical Engineering), University of Technology, Baghdad, Iraq, University of Technology
Baghdad, Iraq, Ph.D. with Distinction (Chemical Engineering), UM, Kuala Lumpur,
LECTURER
Tel 03-79675280 Email maan@um.edu.my
Dr. Mohammed Jameel
LECTURER
Tel 03-79675280 Email jameel@um.edu.my
Dr. Shatirah Mohamed Akib
B.Sc. (Civil Eng) (Hons) (UiTM), M.Sc. (Civil Eng) (Water) (Cardiff ),
Ph.D. (Hydraulic Structure Engineering) (Malaya)
SENIOR LECTURER
Specialization Hydraulic and Water Engineering
Tel 03-79677651 Email shatirah@um.edu.my
Dr. Saravanan Pichiah
B.Tech. (Chemical Engineering), (Madras), M.Tech. (Environmental Engineering) (Vellore
Institute of Technology ), Ph.D. (Chemical Engineering), (IIT Guwahati)
SENIOR LECTURER
Tel 03-79677678 Email saravananpichiah@um.edu.my
Dr. Wan Zurina Wan Jaafar
B.Eng. Hons. (Civil) (UM), MSc (GIS) (Malaya)Doctoral Degree (PhD), Bristol University,
Bristol, Uk
SENIOR LECTURER
Specialization Engineering Surveying
Tel 03-79675203 Email wzurina@um.edu.my
Academic Staff
B.E. Civil Eng. (Osmania University), India. M.Tech. Structural Eng. (Aligarh Muslim
University), Aligarh, India. Ph.D. Structures, (IIT Delhi), India
Engr. Dr. Meldi Suhatril
B.Eng. (Civil Eng.) (UPM), M.Eng. (Structural Eng.) (UPM),
Ph.D (Civil/Earthquake Eng.) (UTM), Grad.IEM
LECTURER
Specialization Geotechnical & Structural Earthquake Engineering.
Tel 03-79677679 Email meldi@um.edu.my
Academic Staff
Mohd Rasdan Ibrahim
Dip.Civil Eng. (PPD), B.Eng.Hons. (Civil Eng.) (UiTM)o, M.Eng.Sc. (Transport Eng.)
(UNSW)
LECTURER
Specialization Transportation Engineering.
Tel 03-79676881 Email rasdan@um.edu.my
Onn Chiu Chuen
B.Eng. Hons. (Environmental) (Malaya), M.Sc. (Eng) (Environmental) (Malaya).
TUTOR (SLAB/SLAI) (ON STUDY LEAVE)
Tel 03-79676829 Email onnchiuchuen@um.edu.my
Nuruol Syuhadaa Mohd
B.Eng. Hons. (Environmental) (UM), M.Sc. (Environmental Eng.)
(Drexel University, USA).
LECTURER (SLAB/SLAI) (ON STUDY LEAVE)
Tel 03-79675203 Email n_syuhadaa@um.edu.my
Yuen Choon Wah
B.Eng. Hons. (Civil Eng.) (Malaya), M.Sc. (Eng) (Transport Eng.) (Malaya).
Tel 03-79675339 Email yuencw@um.edu.my
Suhana Koting
B.Eng. Hons. (Civil Eng.) (Malaya), M.Sc. (Eng) (Transport Eng.) (Malaya).
Tel 03-79675275 Email suhana_koting@um.edu.my
NG Chee Guan
B.Eng. Hons. (Environmental) (Malaya), M.Sc. (Eng) (Environmental) (Malaya).
Tel 03-79676829 Email guancher@siswa.um.edu.my
Academic Staff
PROFILE DIRECTORY
SUPPORTING STAFF
Janathal Karuppaya
ADMINISTRATIVE STAFF
Tel 03-79675203 Email jana@um.edu.my
ADMINISTRATIVE STAFF
Tel 03-79675203 Email faziati@um.edu.my
Haryani Azahari
SCIENCE OFFICER
Tel 03-79675279 Email haryani@um.edu.my
Alya Farhana Shaffiee
MEDICAL LAB TECHNOLOGISTS
Tel 03-79676853 Email alyafarhana@um.edu.my
Kalaiselvi Palani
ASSISTANT SCIENCE OFFICER
Tel 03-79675219 Email kalai@um.edu.my
Supporting Staff
Faziati Mohd
Supporting Staff
Azhar Arshad
Tel 03-79675363 Email azhararshad@um.edu.my
Muhairizam Manan
Tel 03-79677641 Email muhairizam@um.edu.my
Mohamad Shukri Abdul Jamil
Tel 03-79675354 Email shukri@um.edu.my
Mohd Termizi Mohamed Kasim
Tel 03-79675274 Email mohdtermizi@um.edu.my
Ayob Sharif
SENIOR TECHNICIAN
Tel 03-79675346 Email ayobsharif@um.edu.my
Nurfazeeha Omar Zainal
TECHNICIAN
Tel 03-79675278 Email nurfazee@um.edu.my
TECHNICIAN
Tel 03-79676853 Email roy69@um.edu.my
Mohd Khairul Anwar Abu
TECHNICIAN
Tel 03-79675276 Email anwarabu@um.edu.my
Hasanah Abu Bakar
TECHNICIAN
Tel 03-79675203 Email hasanah84@um.edu.my
Supporting Staff
Rozita Yusop
CURRICULUM STRUCTURE
SESSION 2014/2015
DEGREE IN BACHELOR OF ENGINEERING (ENVIRONMENTAL)
COURSES
CONTENT
UNIVERSITY
COURSES
(15%)
Information Skills
Islamic and Asian Civilizations (TITAS)*
Ethnic Relation* / Introduction to Malaysia**
Basic of Entrepreneurship Culture
Thinking and Communication Skills
English Communication Programme
Social Engagement
Co-Curriculum
Elective Course (outside faculty)
FACULTY
COURSES
(85%)
CREDIT HOURS
1
2
2
2
3
6
2
2
2* / 4**
Sub-Total Credit Hours
22
Faculty Core Courses
Department Compulsory Courses
Department Elective Courses
15
101
4
Sub-Total Credit Hours
120
Total Credit Hours
142
Note:
* For Malaysian Students
** For International Students
GRADUATION REQUIREMENT CHART
BACHELOR OF ENGINEERING (ENVIRONMENTAL) PROGRAMME
INTAKE SESSION 2014/2015
CODE
COURSE
UNIVERSITY COURSES
GXEX1401
Information skills
GXEX1414
Islamic and Asian Civilizations
GXEX1411/
Ethnic Relations/
GXEX1413
Introduction to Malaysia
GTEE11xx
English Communication Programme I
GTEE11xx
English Communication Programme II
Co-curriculum
KXEX2167
GXEX1412
Basic of Entrepreneurship Culture
GXEX 1417
Social Engagement
Elective Courses (Other Faculty)
Sub-total Credit Hours
FACULTY COURSES
KXEX1110
Foundation of Materials Science
KXEX1144
Basic Engineering Calculus
KXEX1145
Basic Engineering Algebra
KXEX2244
Ordinary Differential Equations
KXEX2166
Law and Engineer
KXEX2162
Economy, Finance & Engineer
Moral and Ethics in Engineering
KXEX2165
Profession
Sub-total Credit Hours
CREDIT
PASSING
GRADE
1
2
S
C
2
3
3
2
3
2
2
2
22
C
C
C
S
C
C
C
C
3
2
2
2
2
2
C
C
C
C
C
C
2
C
15
MARKING SCHEME
Marks
Grade
80 – 100
75 – 79
70 – 74
65 – 69
60 – 64
55 – 59
50 – 54
45 – 49
40 – 44
35 – 39
< 35
A
AB+
B
BC+
C
CD+
D
F
Grade
U
S
P
Grade
Points
4.0
3.7
3.3
3.0
2.7
2.3
2.0
1.7
1.5
1.0
0.0
Remarks
Unsatisfactory / Fail
Satisfactory / Pass
Progressive
GRADUATION REQUIREMENT CHART
BACHELOR OF ENGINEERING (ENVIRONMENTAL) PROGRAMME
INTAKE SESSION 2014/2015
COURSE
CREDIT
PASSING
GRADE
Drawing for Civil Engineers
Engineering Mechanics
Strength of Materials
Fundamental of Surveying
Microbiology and Ecology for
Environmental Engineers
Fluid Mechanics
Ecology Field Trip
Computer Programming
Probability and Statistics
Concrete Materials
Fundamental of Engineering Geology
Soil Mechanics
Environmental Chemistry
Water Resources
Reinforced Concrete Design
Theory of Structure I
Open Channel Hydraulics
Air and Noise Pollution
Civil Engineering Mathematics I
Civil Engineering Mathematics II
Structural Steel Design
Theory of Structure II
Geotechnics
Contaminant Transport
Environmental Health and
Engineering
Chemical Principles Process
Applied Hydraulics
Industrial Training
Environmental Impact Assessment
Construction Management and
Technology
Wastewater Treatment
Solid Waste Management
Water Supply Engineering
Thesis
Integrated Design
Elective Course I
Elective Course II
3
3
3
3
C
C
C
C
CODE
MARKING SCHEME
DEPARTMENTAL COURSES
KAEA1102
KAEA1121
KAEA1122
KAEA1146
KAES1147
KAES1151
KAES1148
KAEA2101
KAEA2103
KAEA2126
KAEA2134
KAES2136
KAES2144
KAEA2155
KAES2217
KAEA2223
KAEA2256
KAES3146
KAEA3201
KAEA3202
KAES3218
KAEA3224
KAES3235
KAES3244
KAES3245
KAES3247
KAEA3257
KAES3191
KAES4143
KAEA4165
KAES4248
KAES4253
KAES4257
KAES4281
KAES4283
KAEA/S43xx
KAEA/S43xx
Sub-total Credits
TOTAL CREDITS
3
3
2
2
2
2
2
3
3
3
4
3
2
3
2
2
3
3
3
2
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
2
3
3
5
2
C
C
C
S
C
3
3
3
2
6
5
2
2
C
C
C
C
C
C
C
C
105
142
Marks
Grade
80 – 100
75 – 79
70 – 74
65 – 69
60 – 64
55 – 59
50 – 54
45 – 49
40 – 44
35 – 39
< 35
A
AB+
B
BC+
C
CD+
D
F
Grade
U
S
P
Grade
Points
4.0
3.7
3.3
3.0
2.7
2.3
2.0
1.7
1.5
1.0
0.0
Remarks
Unsatisfactory / Fail
Satisfactory / Pass
Progressive
FACULTY OF ENGINEERING
COURSE PRO-FORMA
UNIVERSITY COURSES
Course Pro-forma
University Course
Code
GTEE1107
Title
Communication in English III
Pre-requisite
Student Learning Time (SLT)
MUET Band 2
120 hours
Credit
3
Learning Outcomes
1.
2.
3.
4.
Synopsis
Assessment
References
This course is designed for students with an elementary
proficiency in English. It provides basic communication skills to
students with an emphasis on vocabulary building and accuracy
in grammar at the post-elementary level. The course enables
students to speak and write moderately well.
70 % Continuous Assessments
30 % Final Examination
1.
2.
3.
4.
5.
Soft Skills
Speak accurately and fluently at post- elementary level
Apply grammar correctly at post-elementary level
Write a coherent and cohesive paragraph
Use words at 750 headword level
Johannsen, K. L., & Chase, R.C. (2010). World English 2, USA:
Heinle, Cengage Learning.
Hornby, A.S.(ed) (2005). Oxford Advanced Learners’
Dictionary of Current English. Oxford, UK: Oxford University
Press.
Elbaum, S.N. (2010).Grammar in Context. 5th Edition. USA:
www.vocabulary.com
www.dictionary.cambridge.org
Communication Skills (CS1, CS2, CS3)
Teamwork Skills (TS1)
Course Pro-forma
University Course
Code
GTEE1109
Title
Speaking Skills in English
Pre-requisite
MUET Band 3
120 hours
Credit
3
Learning Outcomes
1.
2.
3.
Synopsis
Assessment
References
This course focuses on various speaking skills in English. It
develops students communication skills and strategies that
enable them to interact appropriately on topics of current
interest. Students will learn to speak fluently in a variety of
informal situations.
1.
2.
3.
4.
5.
Soft Skills
Express ideas clearly using appropriate communication
strategies
Converse effectively using appropriate communication
strategies
Discuss topics of current interest in informal settings
Liu, J., Davis,T., Rizzo S.(2008). Communication Strategies 3.
Singapore:Cengage Learning.
Press.
Web English.
www.brody.iif.hu/webenglish/Pages/mg_speaking.html
Windle, R. , Warren,S. Communication
Skills.www.directionservice.org/cadre/section4.cfm
Course Pro-forma
University Course
Code
GTEE1110
Title
Writing Skills in English
Pre-requisite
MUET Band 3
122 hours
Credit
3
Learning Outcomes
1.
2.
3.
Synopsis
Assessment
References
This course introduces the process of paragraph development
and the generation of ideas in order to write within a variety of
rhetorical patterns. It does this by focusing on the elements of
good sentences within the context of a paragraph, the active use
of a wide range of vocabulary as well as the elements of a good
paragraph. The course helps students to understand the
relationship between paragraphs in an essay, to edit their work
and to produce different types of essays.
1.
2.
3.
4.
5.
Soft Skills
Express ideas clearly, appropriately and effectively through
the written mode
Develop different types of paragraphs coherently and
cohesively
Write different types of essays.
Folse, K S, Solomon E V, Clabeaux D. (2010). Great Writing
3,2nd Edition, USA: Heinle Cengage Learning.
Sinclair, J (Ed), (2009).Collins COBUILD Advanced Dictionary.
USA: Heinle Cengage Learning.
www.vocabulary.com
Course Pro-forma
University Course
Code
GTEE1111
Title
Presentation Skills at the Work Place
Pre-requisite
MUET Band 4
120 hours
Credit
3
Learning Outcomes
1.
2.
3.
4.
Synopsis
Assessment
References
The course encompasses different aspects of communication
used in delivering effective impromptu speeches, oral
presentations and conducting interviews for presentations.
Appropriate examples from a variety of situations are used as
practice materials for students to analyse, discuss and apply the
communication strategies taught.
1.
2.
3.
4.
5.
Soft Skills
Employ appropriate interviewing techniques when collecting
information
Write speech outlines for presentations
Apply appropriate presentation skills and strategies when
delivering impromptu speeches to a selected audience
Apply appropriate presentation skills and strategies when
delivering prepared speeches to a selected audience
Dale, P. & Wolf, J.C. (2006). Speech Communication Made
Simple (3rd Edition). White Plains, NY: Pearson Education.
Comfort, J. (1995). Effective Presentations. Great Clarendon
Street, Oxford: Oxford University Press.
Jaffe, C.(2010). Public Speaking: Concepts and Skills for a
Diverse Society. Boston,MA: Wadsworth Cengage Learning.
Lucas, S. (2008).The Art of Public Speaking with Connect
Lucas.New York,NY: McGraw-Hill.
Articles and videos on Oral Presentations.
http://www.ehow.com/about_6324248_definition-_oralpresentation_.html
Communication Skills (CS1, CS2, CS3, CS4)
Critical Thinking and Problem Solving Skills (CT1, CT2)
Long Life Learning and Information Management (LL1)
Course Pro-forma
University Course
Code
GTEE1112
Title
Introduction to Critical Reading in English
Pre-requisite
MUET Band 4
120 hours
Credit
3
Learning Outcomes
1.
2.
3.
Synopsis
Assessment
References
This course aims at developing the critical reading fluency of
students towards meeting their academic needs. Students will
engage with reading selections which are complemented with
exercises and activities. Some of the skills that will be taught
include interrogating texts to understand the stance of the
author, the relationships between ideas in the texts, and the
supporting evidence.
1.
2.
3.
4.
5.
Soft Skills
Identify an authors purpose, assertions and assumptions
Comprehend ideas based on evidence
Analyze ideas from multiple sources and perspectives
Benz, Cheryl & Cynthia M. Shuemann (2006). College
Reading 4: English for Academic Success. Boston: Heinle.
The Cambridge Dictionary of English (1995). Cambridge
University Press
Fleming, L. (2012). Reading for Thinking. 7th ed. Australia:
Wadsworth
Mather, P. & McCarthy, R. (2009).The Art of Critical Reading.
2nd ed.Boston, MA: McGraw-Hill.
Metcalf, M. (2006). Reading Critically at University. London:
Sage Publications.
Team Work Skills (TS1)
Course Pro-forma
University Course
Code
GTEE1113
Title
Technical Writing
Pre-requisite
MUET Band 4
120 hours
Credit
3
Learning Outcomes
1.
2.
3.
4.
Synopsis
Assessment
References
This course will introduce students to the importance of good
technical writing skills. Using materials related to their field,
students will be taught in stages to write a variety of technical
documents. Technical writing mechanisms will also be taught.
1.
2.
3.
4.
5.
Soft Skills
Determine audiences and purposes for written documents
Formulate appropriate messages for brief correspondence
Write informative reports
Produce a problem-solution report
Smith-Worthington, D. & Jefferson, S. (2011). 3rd Edition
Technical Writing for Success. USA: South Western Cengage
Learning.
Sargunan, R.A. et al. (2010) Report Writing for Business and
Professional Purposes: An Introduction. 2nd Edition.
Hornby, A.S.(ed) (2005). Oxford Advanced Learners
Press.
www.apastyle.org/
Team Work Skills (TS1, TS2)
Course Pro-forma
University Course
Code
GTEE1205
Title
Communication in English II
Pre-requisite
Passed GTEE 1105
120 hours
Credit
3
Learning Outcomes
1.
2.
3.
Synopsis
Assessment
References
This course is designed for students with pre-elementary
proficiency in English. It aims to provide basic communication
skills to students, with an emphasis on vocabulary building and
accuracy in grammar as well as producing correct sentences at
the elementary level.
1.
2.
3.
4.
5.
Soft Skills
Speak accurately and grammatically at the elementary level
Construct grammatical sentences appropriate to an idea
Use words at 500-headword level
Milner, M. (2010). World English 1, USA: Heinle,Cengage
Learning.
Press.
Heinle,Cengage Learning.
www.vocabulary.com
Communication Skills (CS1, CS2)
Course Pro-forma
University Course
Code
GTEE1207
Title
GTEE1207
Pre-requisite
Passed GTEE1107
120 hours
Credit
3
Learning Outcomes
1.
2.
3.
4.
Synopsis
Assessment
References
This course is designed for students with a post-elementary
proficiency in English. It provides basic communication skills to
students with an emphasis on vocabulary building and accuracy
in grammar at the pre-intermediate level. The course enables
students to speak and to write different types of paragraphs
fairly well.
1.
2.
3.
4.
5.
Soft Skills
Speak accurately, fluently and appropriately at preintermediate level
Apply grammar correctly at preintermediate level
Write different types of coherent and cohesive paragraphs
Use words at 1200 headword level
Chase, R. T., & Johannsen, K.L. (2010).World English 3. USA:
Press.
www.vocabulary.com
Course Pro-forma
University Course
Code
GXEX1401
Title
Information Skills Course
Pre-requisite
None
40 hours
Credit
1
Learning Outcomes
1.
2.
3.
Synopsis
Assessment
References
This course focus on the use of basic references sources in print
and electronic format, effective information search strategy,
information evaluation and preparing reference list.
1.
2.
3.
4.
Soft Skills
State the various information and reference sources
Identify information from various sources such as OPAC
(Online Public Access Catalogue), Online Databases and
Internet
Prepare list of references based on the APA (American
Psychological Association) / Vancouver / CSLW (Citation Style
for Legal Works) citation style
Gash, S. (1998). Effective literature searching for studies.
Aldershot: Gowers.
Gates. J. K. (1994). Guide to the use of libraries and
information sources (7th ed.).New York: McGraw Hills
Irma Indayu Omar, & Yushiana Mansor. (2005). Panduan
mencari maklumat. Pahang: PTS Professional.
E-Learning website (http://adec.um.edu.my/main)
Life Long Learning and Information Management (LL1, LL2, LL3)
Critical Thinking and Problem Solving Skills (CT1, CT2, CT3)
Course Pro-forma
University Course
Code
GXEX1411
Title
Hubungan Etnik
Pre-requisite
None
80 hours
Credit
2
Learning Outcomes
1.
2.
3.
4.
Synopsis
Assessment
References
Soft Skills
Menerangkan konsep asas dan teori hubungan etnik.
Mengaplikasi ilmu, konsep dan prinsip interaksi sosial dan
integrasi nasional.
Memaparkan kelakuan yang beretika dan sikap
bertanggungjawab terhadap masyarakat.
Menunjuk cara kemahiran interpersonal yang berkesan dan
bekerja secara berkumpulan.
Kursus ini akan memperkenalkan konsep asas dan teori
hubungan etnik. Pelajar juga akan didedahkan dengan sejarah
pluraliti masyarakat Alam Melayu dan masyarakat Malaysia
kontemporari. Selain itu, topik-topik tentang perlembagaan,
perkembangan ekonomi, politik dan Islam Hadhari dalam konteks
hubungan etnik juga akan diperjelaskan. Sehubungan itu
perbincangan tentang cabaran terhadap hubungan etnik di
Malaysia dan global juga perlu bagi membentuk masyarakat
berintegrasi.
Modul Hubungan Etnik, Shamsul Amri Baharuddin (Ed.). Kuala
Lumpur: UPENA, 2007. (Modul yang ditetapkan oleh KPT)
Life Long Learning and Information Management (LL1, LL2)
Professional Ethics and Moral (EM1)
Course Pro-forma
University Course
Code
GXEX1412
Title
Basic Entrepreneurship Culture
Pre-requisite
None
80 hours
Credit
2
Learning Outcomes
1.
2.
3.
4.
5.
Synopsis
Assessment
References
This course will attempt to inculcate the basic elements of
entrepreneurship in the students. Initiatives are taken to open
their minds and motivate the entrepreneurial spirit in this
potential target group. The course encompasses concepts and
development of entrepreneurship, analysis of entrepreneurship
competency, ethics of entrepreneurship, creativity and
innovation in entrepreneurship, business opportunity, ability to
start a business, developing business plans, skills to run and
manage a business. The course also incorporates a practical
application of skills acquired through joint or individual setting up
and running of business stalls to inculcate interest in the
entrepreneurial spirit, provide meaningfull experience and
expose students to a semblance of the business world.
1.
2.
3.
4.
5.
Soft Skills
Explain the concepts of entrepreneurship and its
importance.
Explain the meaning of entrepreneurial ethics.
Evaluate entrepreneurial spirit in themselves.
Apply creativity and innovation in entrepreneurship.
Develop a concrete business plan.
Ab. Aziz Yusof, Prinsip Keusahawanan, 2003, Malaysia :
Pearson Malaysia Sdn. Bhd.
Hisrich, R.D., Peters, M.P. & Shepherd, D.A, 2005,
Entrepreneurship, 6th. Edition, Singapore : McGraw Hill.
Kuratko, D.F. & Hodgetts, R.M. 2007, Entrepreneurships
theory, process, practice, 7th. Edition, Canada : Thomson
South-Western.
Lambing, P.A. & Kuehl, C.R. 2007, Entrepreneurship, 4th.
Edition, New Jersey : Pearson Education, Inc.
Rosli Mahmood & rakan-rakan, Prinsip-prinsip Asas
Keusahawanan, 2007, Malaysia : Thomson.
Entrepreneneurial Skills (KK1, KK2)
Course Pro-forma
University Course
Code
GXEX1413
Title
Introduction to Malaysia
Pre-requisite
None
80 hours
Credit
2
Learning Outcomes
1.
2.
3.
Synopsis
Assessment
References
This course will explain the history and formation of Malaysia. It
will also discuss the national administrative structure and system
of Malaysia, the Malaysian Constitution, culture, values, ethnic
orientation, national integration, unity and guidelines on social
interactions with Malaysians.
1.
2.
3.
Soft Skills
Explain history, administrative structure and Constitution of
Malaysia.
Explain places, races, way of life, values and culture of
Malaysians
Demonstrate effective interpersonal skills and teamwork.
Multicultural Malaysia: Delights, puzzles & irritations, Kuala
Lumpur: Prentice Hall Pearson Malaysia Sdn. Bhd.
Cheah Boon Kheng. (2002), Malaysia: The Making of a
Nation, Singapore: Institute of Southeast Asian Studies.
Kahn, J. And Loh Kok Wah (eds). (1993), Fragmented Vision:
Culture and Politics in Contemporary Malaysia, Sydney: Allen
and Unwin.
Course Pro-forma
University Course
Code
GXEX1414
Title
Islamic and Asian Civilisation (TITAS)
Pre-requisite
None
80 hours
Credit
2
Learning Outcomes
1.
2.
3.
4.
Synopsis
Assessment
References
This course will discuss knowledge of civilisations incorporating
such topics as introduction to civilisational knowledge, concepts,
values, history, society, culture and the achievements of Islamic,
Chinese, and Indian civilisations. The course also discusses
contemporary and future issues on civilisational dialogue.
1.
2.
3.
4.
5.
Soft Skills
Explain the meaning of civilisation.
Identify the concepts, principles, history, society, culture,
and achievements in islamic, malay, chinese and indian
civilisations.
Relate to current and future issues on civilisational dialogue.
Demonstrate effective interpersonal skills and teamwork.
Penerbit UM. 2001. Tamadun Islam dan Tamadun Asia, Kuala
Lumpur: Penerbit Universiti Malaya.
Penerbit UM. 2006. Tamadun Islam dan Tamadun Melayu,
Kuala Lumpur: Penerbit Universiti Malaya.
Huntington, Samuel. 1996. The Clash of Civilizations and the
Remaking of World Order. New York: Simon and Schuster.
Ibn Khaldun. 1995. Mukaddimah (terj), Kuala Lumpur: Dewan
Bahasa dan Pustaka
Azizan Baharuddin. 2005. Islam dan Dialog Peradaban: Satu
Perspektif. Kuala Lumpur: Pusat Dialog Peradaban Universiti
Malaya.
Course Pro-forma
University Course
Code
KXEX2167
Title
Pre-requisite
Credit
Learning Outcomes
None
120 hours
3
1.
2.
3.
4.
Synopsis
Assessment
References
Introducing to students the objective, procedure, evaluation, and
explanation regarding critical thinking and communication skills.
Critical thinking skills include explaining and analyzing ideas;
analyzing and evaluating arguments; determining source
credibility; recognizing persuasive language; and recognizing
fallacy. Communication skills cover oral communication; listening
skills; non-verbal communication; interpersonal communication;
group interaction skills; and problem solving and decision
making. Students will also be brief on barriers in critical thinking
and communication. Interactive sessions will impose the students
to apply or practice critical thinking and communication skills to
engineering discipline effectively.
1.
2.
3.
4.
5.
Soft Skills
Recognise the basics of critical thinking skills and logic
Identify the methods of effective oral and written
communication skills
Debate or criticize arguments related to engineering
discipline successfully
Apply critical thinking and communication skills in
engineering practice
G. Bassham, W. I. Irwin, H. Nardone and J.M. Wallace,
Critical Thinking: A Student Introduction, Mc. Graw Hill.
Fishe. Critical Thinking: An Introduction. Cambridge
University Press.
S. Taylor, Essential Communication Skills, Pearson Longman.
T.K. Gamble & M. Gamble, Communication Works. Mc. Graw
Hill.
J. W. Davies, Communication For Engineering Students.
Longman
Communication Skills (CS1,CS2,CS3, CS4, CS7, CS8)
Continuous learning and Information Management (LL1, LL2)
Ethics and Professional Moral (EM1)
Leadership Skills (LS1)
Course Pro-forma
University Course
Code
GXEX 1417
Title
Social Engagement
Pre-requisite
Credit
Learning Outcomes
None
80 hours
2
1.
2.
3.
Synopsis
Assessment
References
This course exposes the students on social engagement and their
role as volunteers. Students need to plan their social engagement
programme and will be placed at a specific location based on their
programme. Students have to write a report and make a
presentation on their experience with the society.
1.
2.
3.
Soft Skills
Demonstrate the awareness of the importance of
social engagement
Develop the ability to work in a team and with the
society
Show communication skill
Compton & Galaway, 1979. Social Work Process,, New
York: The Dorsey Press.
Reid K.E 1991. Social Work Practoce With Groups, Clinical
Perspective California: Brooks/Cole Pub.Co
Hepworth D.H & H Larsen J.A 1993. Direct Social Work
Practice, Theory and Skills. California : Brooks/Cole Pub.Co
Communication Skills (CS1 – CS3)
Team Work Skills (TS1 - TS2)
Leadership Skills (LS1)
FACULTY OF ENGINEERING
COURSE PRO-FORMA
FACULTY COURSES
Course Pro-forma
Faculty Course
Code
KXEX1110
Title
Fundamentals of Material Science
Pre-requisite
None
122 hours
Credit
3
Learning Outcomes
1.
2.
3.
4.
Synopsis
Assessment
References
Soft Skills
Explain the theory of basic atomic structure and the
imperfection.
Describe the phase diagram, materials characteristic and
mechanical testing
Discuss the characteristic, processing and application of
polymer, ceramic and composite
Give example of some electrical and magnetic properties of
materials
Introduction to Materials science and engineering, atomic
structure and atomic bonding. Crystal structure and
imperfection. Steel characteristic and processing, phase diagram
and engineering alloy. Characteristic. Processing and application
of polymer, ceramic and composite
Foundation of Materials Science and Engineering, William F.
Smith, Javad Hashemi, McGraw Hill. 2005
Critical Thinking and Problem Solving Skills (CT1)
Teamwork Skills (TS1, TS2)
Course Pro-forma
Faculty Course
Code
KXEX1144
Title
Basic Engineering Calculus
Pre-requisite
None
80 hours
Credit
2
Learning Outcomes
1.
2.
3.
Synopsis
Assessment
References
Functions. Trigonometric and hyperbolic functions, exponential
functions, logarithmic functions. Concept domain and range of
function, graphs of function, Inverse functions, combining
functions, composite functions, rational functions and partial
functions.
Limit continuity and differentiation. Concept of limit. Continuity
and types of discontinuity. Derivative of trigonometric and
hyperbolic functions. Increasing and decreasing functions.
Implicit differentiation and the chain rule. Higher
1.
2.
3.
Soft Skills
Describe elementary special functions (e.g. exponential, log,
and trigonometric functions) which arise in engineering.
Practice the skills obtained from differential and integral
calculus to deal with models in engineering
Use the basic calculus concepts and apply knowledge gained
in subsequent engineering courses or others
Modern Engineering Mathematics, (4th edition), Glyn James
(Edison-Wesley), 2007
Engineering Mathematics, (5th edition), K. A. Stroud and D.J.
Booth (Palgrave), 2007
Further Engineering Mathematics, (3rd edition), K. A. Stroud
(MacMillan) 1992
Course Pro-forma
Faculty Course
Code
KXEX1145
Title
Basic Engineering Algebra
Pre-requisite
None
80 hours
Credit
2
Learning Outcomes
1.
2.
3.
4.
Synopsis
Use DeMoivre Theorem and Euler Formula to determine the power
and roots of complex numbers.
Explain the concepts of matrices, determinants, ranks,eigenvalues
and eigenvectors.
Solve systems of linear equations and diagonalize square matrices.
Use the dot product, cross product and triple products of vectors to
determine the parametric equations and vector equations of lines
and planes.
Complex numbers: Addition, substraction, multiplication and division.
Complex numbers in polar form. Complex numbers in exponent form.
DeMoivre Theorem. Power and roots of complex number. Euler
Formula.
Matrices: Diagonal, symmetric, skew symmetric, orthogonal, Hermitian,
skew Hermitian and unit matrix. Transpose. Determinant. Minor,
cofactor and adjoint. Singular and non-singular matrices. Inverse of
matrix. Linearly dependent and linearly independent vectors. Rank of a
matrix. Homogenous and non-homogenous system of linear equations.
Existence of solutions and their properties. Gaussian Elimination
method. Cramers Rule. Eigenvalues and eigenvectors. Diagonalization.
Cayley-Hamilton Theorem.
Vector Algebra: Cartesian Vector in two and three dimension systems.
Dot and cross product. Parametric Equations and Vector Equations of
lines. Skew Lines. Equations of planes. Distance between a point and a
plane. Distance between two planes. Angle between two intersecting
lines an
Assessment
References
1.
2.
3.
4.
Soft Skills
Modern Engineering Mathematics, (4th edition), Glyn James
(Edison-Wesley), 2007
Theory and Problems of Vector Analysis, (2nd edition), Murray R.
Spiegel (Schaum's series) 2008
Engineering Mathematics, (5th edition), K. A. Stroud and D.J. Booth
(Palgrave), 2007
Further Engineering Mathematics, (3rd edition), K. A. Stroud
(MacMillan)) 1992
Course Pro-forma
Faculty Course
Code
KXEX2162
Title
Economics, Finance and Engineers
Pre-requisite
None
80 hours
Credit
2
Learning Outcomes
1.
2.
3.
4.
Synopsis
Assessment
References
This course introduces the economic principles and analytical
tools needed to think intelligently about economic problems. The
course begins by focusing on microeconomics, in which students
will examine the concept and principles of individual consumer
and firm behaviour. In the second part of the course deals with
the thought processes, concepts, methods, and knowledge bases
used by engineers to cost engineering projects and to evaluate
the merit of making a particular investment, and to chose
1.
2.
3.
Soft Skills
recognize key ideas in economic analysis that address the
economic problem of how to allocate scarce resources
among unlimited wants.
to conceptualize the principles of demand and supply as well
as the analysis of competitive markets
to satisfy the very practical needs of the engineer toward
making informed financial decisions when acting as a team
member or project manager for an engineering projects.
apply the concept of Time Value of Money and discounted
cash flow in investment decision making and financial
management
McEachern, Economics- A Contemporary Introduction,
Seventh Edition, Thomson Learning
Pindyck Rubinfield, Micro Economics, Sixth Edition, Prentice
Hall, New Jersey
Blank Tarquin, Engineering Economy, Sixth Edition, McGrawHill.2005
Course Pro-forma
Faculty Course
Code
KXEX2165
Title
Moral and Ethics in Engineering Profession
Pre-requisite
None
80 hours
Credit
2
Learning Outcomes
1.
2.
3.
4.
5.
6.
Synopsis
Assessment
References
Soft Skills
Learn the implications of moral and ethics in engineering
works
Understand the basis of moral & ethics behind the
promulgation of codes of ethics(COE) which are adopted by
professional engineering bodies
Recognise the practical needs of COE to regulate engineering
practices
Understand COE of various organisation such as Institution
of Engineers , Malaysia(IEM) and National Society of
Professional Engineers(NSPE,USA) and the importance of
Registration of Engineers Act
Realise the implication of moral & ethics for engineers
behaviour through presentation of case studies
Assess between good and bad course of actions when facing
with corporate decision which need to be made in their
organisation
Introduction to engineering profession and implication of
engineering career. Moral, religious and ethical theories &current
Codes of Ethics. Responsibilities and right of Engineers and
implication of public welfare and loyalty to employer.
Environmental ethics, risks, liability and law. Roles of Engineers
on sustainable development and globalisation
Fleddermann,C.B. Engineering Ethics, 1999, Prentice Hall,N.J
Professional Ethics and Moral (EM1, EM2, EM3)
Leadership Skills (LS1, LS2)
Course Pro-forma
Faculty Course
Code
KXEX2166
Title
Law and Engineer
Pre-requisite
None
80 hours
Credit
2
Learning Outcomes
1.
2.
3.
4.
5.
6.
Synopsis
Assessment
References
Soft Skills
Identify the effect of the law on the society with emphasis
on engineers.
Apply principles of law to a given situation and identify the
liability from a legal perspective.
Identify wrongdoings from the legal perspective and the
consequences of such wrongdoing
Analyse the principles of law in order to avoid conflicts in
society
Establish and analyse contractual obligations
Explain the dimensions of the law in relation to every human
behaviour
Introduction to law and its functions, the basis of laws in relation
to the area of engineering with emphasis on the laws of tort,
contract and intellectual property, Acts of Parliament that are
relevant to these areas
The Law of Tort in Malaysia by Norchaya Talib
Course Pro-forma
Faculty Course
Code
KXEX2244
Title
Ordinary Differential Equations
Pre-requisite
KXEX1144
80 hours
Credit
2
Learning Outcomes
1.
2.
3.
Synopsis
Assessment
References
Fundamental concepts and definitions in ODE, Initial value
problem, First order ODE: separable, linear, exact equations and
equations reducible to those forms. Integrating factor. Linear
equation of higher order: Linearly independent solutions,
Wronskian, Lagranges reduction of order, complementary
functions and particular solutions, the method of undetermined
coefficients, the variation of parameters, Euler-Cauchys equation.
Series solution method: power series, convergence, series soluti
1.
2.
3.
Soft Skills
Ability to recognize the order and linearity of an ODE and
verifying whether a given function is a solution or not. Find
the solution of first order ODE.
Find the solution of linear second order ODE analytically.
Find the solution of linear second order ODE in series form.
Engineering Mathematics (5th Ed), K Stroud & D Booth,
Palgrave (2001)
Modern Engineering Mathematics (2nd Ed), Glyn James,
Addison-Wesley (1996)
Frank Ayres Jr, Schaum Outline Series: Differential Equations,
McGraw Hill, 1972
Life Long Learning and Information Management (LL1)
COURSE PRO-FORMA
BACHELOR OF ENGINEERING (CIVIL)
Course Pro-forma
Bachelor of Engineering (Environmental)
Code
KAEA1102
Title
Drawing for Civil Engineers
Pre-requisite
None
120 hours
Credit
3
Learning Outcomes
1.
2.
3.
4.
5.
Synopsis
Assessment
References
An introduction to the types of civil engineering drawings,
buildings, roads, channels etc. Building drawings such as walls
and partitions, foundations and footings, doors and windows,
floors and staircases, roofs, trusses and ceilings, arches,
reinforced concrete, roads and infrastructure and water
distribution plans. The CESMM (Civil Engineering Standard
Method of Measurement) and work quantity measurement.
Isometric drawing and orthographic projection drawing.
Introduction to computer-aided drawing and AutoCAD. The
drawing and editing commands, coordinates and grid system.
Setting-up the drawing, using layers, colours and linetypes.
Drawing with precision, dimensioning and using blocks. Printing
and plotting.
1.
2.
3.
4.
5.
6.
Soft Skills
Identify the key elements in civil engineering drawing such as
reinforcements, connections and type of drawing available
Practice drawing techniques in draughting technical
drawings
Use AutoCAD to produce technical drawings
View and modify technical drawings stored in digital formats
Use AutoCAD and the CESMM for talking-off quantities from
construction drawings.
Tan Boon Tong, Lukisan Binaan Bangunan, Dewan Bahasa
dan Pustaka, 1993.
Goetsch D, Structural Drafting, Delmar Publishing Inc., 1994.
Francis D.K. Ching, Lakaran Binaan Bangunan, Dewan Bahasa
dan Pustaka, 1994.
Yarwood, A., An Introduction to AutoCAD Rel. 14, Longman,
1998.
Giesecke, et. Al., Technical Drawing, MacMillan.
Omura, G., Mastering AutoCAD 2000, Sybex, San Francisco,
1999.
Critical Thinking and Problem Solving (CT1, CT2, CT3)
Course Pro-forma
Code
KAEA1121
Title
Engineering Mechanics
Pre-requisite
None
122 hours
Credit
3
Learning Outcomes
1.
2.
3.
4.
Synopsis
Assessment
References
Force system and equilibrium. Pin-jointed structures. Properties
of section. Beam analysis. Thin-walled pressure vessels.
Introduction to flexible cables, arches and suspension bridges.
Plane kinetics of rigid bodies
1.
2.
3.
4.
Soft Skills
Determine the internal forces of structures
Recognize the shear force and bending moment diagrams of
loaded beams
Identify the stresses developed in thin wall shells and
cylinders
Recognize the dynamic properties of rigid bodies
J.Cain and R.Hulse, “Structural Mechanics”, Macmillan, 1993
Meriam and Kraige, “Engineering Mechanics: Dynamics”,
Wiley, 1994
H.W.Morrow, “Statics and Strength of Materials”, Prentice
Hall, 1998
Beer, Johnston and DeWolf. “Mechanics of Materials”,
McGraw Hill, 2006
Course Pro-forma
Code
KAEA1122
Title
Strength of Materials
Pre-requisite
KAEA 1121
122 hours
Credit
3
Learning Outcomes
1.
2.
3.
4.
5.
Synopsis
Assessment
References
Stress, strain and elasticity. Bending and shearing stresses in
beams. Torsion. Combined bending and direct stresses. Columns
and struts. Slope and deflection of beams.
1.
2.
3.
4.
5.
Soft Skills
Determine the stresses, strains and deformation of structural
members
Evaluate the values and distribution of direct, bending, shear
and combination of these stresses
Identify the torsional stresses of a shaft
Deduce the buckling load of columns and struts
Determine the deflection and rotation of loaded beams
E.Popov., “Mechanics of materials”, Prentice Hall, 1983
Gere, “Mechanics of materials, Thomson, Brookes/Cole,
2004
Hibbeler, “Mechanics of Materials”, Maxwell Macmillan,
1991
Beer, Johnston & DeWolf. “Mechanics of Materials”,
McGraw Hill, 2006
Morrow, “Statics and Strength of Materials”, Prentice Hall,
1998
Course Pro-forma
Code
KAEA1146
Title
Fundamentals of Surveying
Pre-requisite
None
120 hours
Credit
3
Learning Outcomes
1.
2.
3.
4.
5.
Synopsis
Assessment
References
The importance and objective of survey works to civil engineers.
Survey concept from whole to parts. Summary of mapping
system in Malaysia. Basic elements of a theodolite. Procedure of
traversing by theodolite, observation, booking, reduction and
adjustment of data. Sources of errors in theodolite. Computation
of coordinates and area by coordinate method. Principles of
levelling. Work procedure on levelling, reading, booking and
reduction of data. Sources of error in levelling and methods to
eliminate them. Measurement by stadia method for horizontal
sight distance. Measurement by stadia method. Contour and
taking details by tacheometry. Errors in tacheometry works.
Computation of area enclosed by straight lines, coordinate
method, bearing method and distances. Computation of area of
irregular figures. Trapezoidal and Simpsons rules for computation
of area. Computation of earthwork by cross and longitudinal
section. Volume bymean areas andend areas. Volume based on â
1.
2.
3.
4.
Soft Skills
Apply the surveying techniques in collecting information for
the preparation of details plan for engineering works.
Ability to handle and examine the equipment whether in
good working condition. If necessary carry out the
adjustment.
Calculate the position by applying the concept of traverse
and coordinate computation using latitude and departure.
Calculate the area by coordinate methods and applying the
formulae for the computation of volume.
Apply the formulae in the computation of horizontal curves
and vertical curves and prepare the tables for setting out the
centreline of the proposed road.
A Bannister, S Raymond & R Baker,Surveying 6th Edition,
Longman 1996
F A Shepherd, ‘Advanced Engineering Surveying- problems
and solution’, Edward Arnold Ltd, London, 1981
A Bannister & R Baker,Solving Problems in: SURVEYIMG- 2nd
Edition, Longman Scientific & Technical, Essex, England, 1994
Michael H.Elfick,John G Fryer, Russell C.Brinker, Paul R
Wolf,Elementary Surveying S.I Adaptation, 7th Edition,
Harper & Row (Australia) Pty Limited, 1987
Course Pro-forma
Code
KAEA2101
Title
Computer Programming
Pre-requisite
None
80 hours
Credit
2
Learning Outcomes
1.
2.
3.
Synopsis
Assessment
References
Introducing students to basic computer organization and the
process of computer programming via a selected programming
language. Basic programming tools and programming procedures
are covered. Development of computer codes to solve
mathematical, science and engineering problem are included
where this is followed by running of the complete computer
program codes on PC and finally demonstrating how the program
developed being used to solve a particular problem.
1.
2.
3.
Soft Skills
Recognize the basic computer organisation and translate
problem in science and/or engineering into computer
program-development process
Construct running computer program codes for solving
engineering problems using elementary features, repetition,
decision, subprograms and array of selected programming
language by incorporating good programming practices
Test running computer program codes with meaningful input
and output.
Nyhoff, L.R. and Leestma, S.C. "Introduction to Fortran 90 for
Engineers and Scientists." Prentice Hall, Upper Saddle River,
New Jersey, USA, 1997. QA76.73 F25NYH
Brainerd, W.S, Goldberg C.H., and Adams J.C. "Programmer's
Guide to FORTRAN 90." Springer-Verlag, New York, Berlin,
Heidelberg, 1995. QA76.73 F25BRA
Schick, W. and Silverman, G. "Fortran 90 And Engineering
Computation." John Wiley & Sons, Inc., New York,
Chichester, Brisbane, Toronto, Singapore, 1995. QA76.73
F25SCH
Course Pro-forma
Code
KAEA2103
Title
Probability and Statistics
Pre-requisite
None
80 hours
Credit
2
Learning Outcomes
1.
2.
3.
4.
Synopsis
Assessment
References
Introducing students to statistical and probabilistic methods that
could be utilized for solving problems in civil and environmental
engineering. This includes both descriptive and analytical
methods for dealing with variability in observed data. Also,
included are guided fundamentals of conducting surveys.
1.
2.
3.
4.
Soft Skills
Apply the concept of sampling, sampling distribution,
estimations and testing hypotheses
Apply the concept of linear regression.
Apply the concept of time series
Employ fundamentals of conducting a survey
Naiman, A., Rosenfeld, R., and Zirkel, G. "Understanding
Statistics." The McGraw-Hill Companies, Inc., New York,
London, Tokyo, Singapore, 1996.
Smith, G. "Introduction to Statistical Reasoning." WCB
McGraw-Hill, Boston, New York, San Francisco, 1998.
Dougherty,E.R. "Probability and Statistics For The
Engineering, Computing, and Physical Sciences." PrenticeHall International, Inc., Englewood Cliffs, New Jersey, 1990.
Lind, D., Marchal W.G. and Mason R.D. “Statistical
Techniques in Business and Economics” The McGraw-Hill
Companies, Inc., 2003.
Course Pro-forma
Code
KAEA2126
Title
Concrete Materials
Pre-requisite
None
82 hours
Credit
2
Learning Outcomes
1.
2.
3.
4.
Synopsis
Assessment
References
Introduction concrete as a construction material. Types of
cement, production of cement, physical properties of cement,
cement composition and compounds, cement hydration and
hydration products, tests on cement. Classification of aggregates,
physical and mechanical properties of aggregates, aggregate
grading, tests on aggregates. Design of concrete mixes.
Properties of fresh and hardened concretes, tests for workability
and strength, deformation characteristics, shrinkage and creep,
absorption, porosity and permeability, and durability
1.
2.
3.
4.
Soft Skills
Select the most appropriate types of cement and aggregates
for producing concretes with different performance criteria
conducive to entrepreneurship
Describe the engineering properties of fresh and hardened
concrete and relate them to the properties of constituent
materials with entrepreneurial importance.
Design the concrete mixtures with different strength grades
and workability requirements together with the costing for
concrete production
Recognize the short and long-term deformation
characteristics of concrete and relate them to the behaviour
of concrete structures
Lecture Notes
Neville, A.M. Properties of Concrete, Fourth and Final
Edition, John Wiley & Sons, Inc., New York, USA, 1996,
844pp.
Neville, A.M., and Brooks, J.J., Concrete Technology,
Addison-Wesley Longman, Inc., Essex, England, UK, 1999,
438pp.
Mindess, S., Young, J.F., and Darwin, D., Concrete, Second
Edition, Prentice Hall, New Jersey, USA, 2003, 644pp.
Critical Thinking and Problem Solving (CT1,CT2, CT3)
Teamwork (TS1)
Course Pro-forma
Code
KAEA2134
Title
Fundamentals of Engineering Geology
Pre-requisite
None
81 hours
Credit
2
Learning Outcomes
1.
2.
3.
Synopsis
Assessment
References
The course introduces basic concepts in geology and their
relevance in Civil Engineering. The following topics are covered
Rocks, their component, identification and properties. The
geometry, description and properties of rock masses.
Weathering, erosion, transportation and deposition. Geological
Investigation. Geological problem(s) In Malaysia,
1.
2.
3.
4.
Soft Skills
Recognize and describe rock formation, mineral
composition, geometry and properties (material + mass).
Explain weathering, erosion, transportation and deposition
processes of geomaterials.
Select appropriate methods of geological investigation for
engineering works and relate to engineering problem.
J. Pitts, A manual of Geology for Civil Engineers, Wiley
F. C. Beavis, Engineering Geology, Blackwell Scientific
Publications
T. R. West, Geology – Applied to Engineering, Prentice Hall
E. J. Tarbuck & F. K. Lutgens, Earth Science, Pearson
International
Critical thinking and problem solving (CT1, CT2, CT3)
Course Pro-forma
Code
KAEA2155
Title
Water Resources
Pre-requisite
None
122 hours
Credit
3
Learning Outcomes
1.
2.
3.
4.
5.
Synopsis
Assessment
References
Introduction to hydrological cycle, water balance, surface water
and groundwater flow. Application of statistic and probability in
hydrology and water resources management. Introduction to
urban hydrology and application to Malaysian systems.
1.
2.
3.
4.
5.
Soft Skills
Identify the basic principles of the hydrologic cycle and the
watershed.
Analyze the water losses and fundamental aspects of surface
and groundwater systems.
Apply probability and statistical analysis of precipitation and
stream flow data.
Analyze flood hydrograph, unit hydrograph (UH), and
reservoir routing.
Recognize the practices of urban hydrology in Malaysia and
able to apply the Malaysian guidelines and procedures.
Linsley R. K. Water Resources Engineering. Fourth edition,
McGraw-Hill International Edition, 1992.
Chow, V. T., ed., Handbook of Applied Hydrology, McGrawHill International Edition, 1964.
Shaw M. Elizabeth, Hydrology in Practice, Chapman and Hill
1996.
Urban Storm water Management Manual for Malaysia,
Jabatan Pengairan dan Saliran, 2000.
Hydrological procedure. Drainage and Irrigation Division,
Ministry of Agriculture, Malaysia (1975-1989).
Critical Thinking & Problem Solving Skill (CT1, CT2, CT3)
Course Pro-forma
Code
KAEA2216
Title
Timber Design
Pre-requisite
KAEA1121 and KAEA1122
122 hours
Credit
3
Learning Outcomes
1.
2.
3.
4.
Synopsis
Assessment
References
Soft Skills
Define what is meant by structural design, discuss the
objectives and recognise various methods of design.
Design timber beams, columns and connectors using MS544
Review timber as a structural material.
Recognise various types of timber connectors.
Introduction and objectives of structural design. Elastic and limit
state design methods. Derivation of permissible stresses for
structural timber. Design of timber joists and beams. Design of
timber struts and columns. Design of timber connections.
Introduction of timber as a structural material. Timber defects.
Seasoning of timbers. Preservation of timbers. Standard
mechanical tests for timber. Factors that affects timber
strengths. Various types of timber connections.
1. Desch, H.E.,” Timber, Its Structure, Properties and
Utilisation,” Mac Millan Press. (Latest Edition)
2. Mat Lazim Zakaria, “Rekabentuk Struktur Kayu Menurut
MS544”, Dewan Bahasa dan Pustaka
Critical thinking and problem solving skills (CT1, CT2, CT3)
Course Pro-forma
Code
KAEA2223
Title
Theory of Structures I
Pre-requisite
KAEA1121 and KAEA1122
120 hours
Credit
3
Learning Outcomes
1.
2.
3.
4.
Synopsis
Assessment
References
Analysis of statically determinate space trusses, introduction to
statically indeterminate space trusses, slope deflection method
for analysis of continuous beams and plane frames, moment
distribution method for analysis of continuous beams and plane
frames, shear flow, shear centre and torsion theory, complex
stresses and strains, two dimensional stress system, principal
stresses, principal strain, Mohrs circle and stress-strain
relationships.
1.
2.
3.
4.
Soft Skills
Determine the tensile force or compressive force on each
element of a statically determinate space truss.
Apply the slope-deflection or moment distribution method
to analyse statically indeterminate beams and frames
Determine the torsion, shear centre and shear flow of beams
and thin-walled members
Determine the torsion, shear centre and shear flow of beams
and thin-walled members.
Russell C. Hibbeler,Structural Analysis SI Edition, PrenticeHall, Singapore, 2005.
2). Russell C. Hibbeler, ‘Mechanics of Materials – SI Edition’,
Prentice-Hall, Singapore, 2003
Kenneth M. Leet and Chia-Ming Uang,Fundamentals of
Structural Analysis 2nd Edition, McGraw-Hill International
Edition, 2005.
Ferdinand P. Beer, E. Russell Johnston and John T.
DeWolf,Mechanics of Materials 3rd Edition, McGraw-Hill,
2001.
Course Pro-forma
Code
KAEA2256
Title
Open Channel Hydraulic
Pre-requisite
KAEA1151 Fluid Mechanics
81 hours
Credit
2
Learning Outcomes
1.
2.
3.
4.
Synopsis
Assessment
References
Introduction to basic principles of steady and unsteady flows;
uniform flow and varied flow; GVF and RVF; determination of
types of profiles; Design approach in hydraulics: Dimensional
Analysis and Model studies; Flood routing through regular
channel and simple methods of routing.
1.
2.
3.
4.
Soft Skills
Identify different types of flows and determine the flow
profiles.
Design economically most efficient channels and canal
sections.
Employ dimensional analysis and its application in hydraulics.
Analyze the flood propagation through regular channels.
Ven Te Chow, Open Channel Hydraulics, McGraw Hill
International Edition, 1973.
Subramanya, K. Flow in Open Channels, McGraw Hill
International Edition, 2000.
Chadwick, A. and J.Mofett, Hydraulics in Civil and
Environmental Engineering, 1998.
V.L.Streeter, E.Benjamin Wylie and K.W.Bedford, Fluid
Mechanics, McGraw Hill International Edition, 1998.
Critical Thinking and Problem Solving Skill (CT1, CT2, CT3)
Course Pro-forma
Code
KAEA3201
Title
Civil Engineering Mathematics I
Pre-requisite
KXEX1145, KXEX2244
80 hours
Credit
2
Learning Outcomes
1.
2.
3.
4.
Synopsis
Assessment
References
To complete the students with mathematical engineering topics
specifically for Civil and Environmental Engineering students.
1.
2.
3.
4.
Soft Skills
Determine the Fourier series of a periodic function.
Determine the solution of partial differential equations using
the method of separating the variables.
Use multiple integrals in Cartesian, cylindrical and spherical
coordinates to find mass, centroid and centre of gravity of
solid.
Determine line integrals over curves in two or threedimensional space.
Thomas and Finney, Calculus, Addison Wiley.
Howard Anton, " Calculus and Analytic Geometry", John
Wiley and Sons
Erwin Kreyszig, Advanced Engineering Mathematics, John
Wiley and Sons.
Glyn James,Advanced Modern Engineering Mathematics,
Addison Wesley.
Course Pro-forma
Code
KAEA3202
Title
Civil Engineering Mathematics II
Pre-requisite
KAEA3201
80 hours
Credit
2
Learning Outcomes
1.
2.
3.
4.
Synopsis
Assessment
References
This course introduces students to some numerical techniques in
solving problems that could not be solved analytically. Students
will be exposed to the numerical solution for non linear
equations as well as numerical differentiation and integration.
Besides that students will also learn about numerical solution for
ordinary differential equation and partial differential equations.
1.
2.
3.
4.
Soft Skills
Apply bracketing and open methods in finding roots of nonlinear equations.
Employ suitable formulae in solving differentiation and
integration problems.
Employ suitable formulae to solve ordinary differential
equations.
Apply the Gauss-Siedel method in solving partial differential
equations.
Chapra, S.C & Canale, R.P. Numerical Methods for Engineers.
McGRAW-Hill International Editions, Singapore, 1990.
Ayyub, B.M. "Numerical Methods for Engineers." Prentice
Hall, Upper Saddle River, NJ, 1996.
Hoffman, J.D. Numerical Methods for Engineers and
Scientists. Marcel Dekker, NY, 2001
Matthews, Numerical Methods for Mathematics, Science
and Engineering, Prentice Hall International Editions.
Course Pro-forma
Code
KAEA3224
Title
Theory of Structures II
Pre-requisite
KAEA2223
120 hours
Credit
3
Learning Outcomes
1.
2.
3.
4.
Synopsis
Assessment
References
Principles of strain energy and virtual work, method of virtual
work, energy and reciprocal theorem, Maxwells Theorems and
Bettis Law, Castiglianos Theorem; Force or flexibility method of
analysis, flexibility matrix method; Moving loads and influence
lines for statically determinate structures, Muller-Breslaus
Principle, introduction to influence lines for statically
indeterminate structures; Plastic analysis method, statical
method of analysis, mechanism method of analysis, method of
analysis for beams, portal and gable frames.
1.
2.
3.
Soft Skills
Apply the Principles of Virtual Work as well as the
Castiglianos Theorem to calculate the deflections in beams,
trusses and frames
Employ the force or flexibility method of analysis to analyse
statically indeterminate trusses, beams and frames.
Construct the influence lines for statically determinate and
indeterminate structures.
Apply the principles of plastic analysis method in the analysis
of beams and frames
Russell C. Hibbeler,Structural Analysis SI Edition, PrenticeHall, Singapore, 2005.
A. Ghali and A. M. Neville, ‘Structural Analysis: A Unified
Classical and Matrix Approach – 4th Edition’, E & FN Spon,
London, 1998.
Kenneth M. Leet and Chia-Ming Uang,Fundamentals of
Structural Analysis 2nd Edition, McGraw-Hill International
Edition, 2005.
Course Pro-forma
Code
KAEA3257
Title
Applied Hydraulics
Pre-requisite
Open Channel Hydraulics (KAEA 2256)
120 hours
Credit
3
Learning Outcomes
1.
2.
3.
4.
Synopsis
Assessment
References
This course is geared towards the application of hydraulics. It
starts with the development of the boundary layer in laminar and
turbulent flows. It moves to the study of unsteady flows in
pipelines and analysis. The phenomenon of sediment transport is
discussed followed by the wave theory-classification and
application. Finally, the concept of computational hydraulics is
introduced.
1.
2.
Soft Skills
Differentiate laminar and turbulent flow in boundary layer
Analyze unsteady flow in pipelines and explain surge
pressure.
Determine the characteristics for sediment in channels and
able to perform the sediment transport calculations.
Identify the concepts of waves in coastal region and
computational hydraulics
Chadwick, A.J. and J.C. Morfett (1993) Hydraulics in Civil and
Environmental Engineering. E&FN Spon.
Featherstone and C. Nalluri (1995) Civil Engineering
Hydraulics
Course Pro-forma
Code
KAEA4165
Title
Construction Management and Technology
Pre-requisite
None
122 hours
Credit
3
Learning Outcomes
1.
2.
3.
4.
5.
Synopsis
Assessment
References
Soft Skills
Apply the contract strategy in selecting the best type of
construction contract to suit the type of construction work e.g.
admeasurement, lump sum, cost reimbursable or target cost
contracts.
Manage the tendering process in the construction contract
administration and documentation, prepare contract evaluation
and variation and to make valid civil engineering claims.
Apply the operational cost estimating technique and carry out
risk appraisal for small projects incorporating the method-related
charges.
Apply the project planning technique and the Critical Path
Method (CPM) for construction projects.
Apply the theory of construction materials and plant
management.
Introduction to the civil engineering project phases and cycle. Civil
engineering project organization structures and formation of design
and construction organizations. The tendering process, construction
contract administration and documentation, bills of quantities,
method-related charges, the civil engineering standard method of
measurement (CESMM), contract evaluation and variation, civil
engineering claims. Types of construction contracts admeasurement,
lump sum, cost reimbursable, target cost contracts and contract
strategy. The operational cost estimating technique and risk
appraisal. Project planning and the Critical Path Method (CPM).
Quality management and construction materials management.
1. Turner, D.F, Building Contracts A Practical Guide, 5th. Ed.,
Longman, Avon, 1994
2. The Institution of Civil Engineers, Civil Engineering Procedure,
Thomas Telford, London, 1979.
3. Marsh, P.D.V., Contracting for Engineering and Construction
Projects, 2nd. Ed., Gower, Aldershot, 1981.
4. Pilcher, R., Principles of Construction Management, 3rd. ed.,
McGrawHill, London, 1993.
5. Diamant, L and Tumblin, C.R., Construction Cost Estimate, 2nd. Ed.,
Wiley, New York, 1990.
Entrepreneurial Skills (KK1)
Course Pro-forma
Code
KAES1147
Title
Microbiology and Ecology for Environmental Engineers
Pre-requisite
Credit
Learning Outcomes
None
121 hours
3
1.
2.
3.
4.
5.
Synopsis
Assessment
References
Introduction to basic microbiological concepts; microbial
structure and function; microbial growth; metabolism and
elementary genetics; specific topics– role of microbes in ecology
and environment; role in human life; microbial control;
disinfection; indicator microbes, bio-sensors and pollution
control. Ecosystem concepts and components; interaction
between biotic and abiotic factors. Energy flow through
ecosystems;
Biogeochemical
cycles.
Biodiversity
and
conservation; population and community ecology
40 % Continuous Assessment
1.
2.
3.
4.
5.
Soft Skills
Recognise the importance of micro organisms involved in
waste treatment
Distinguish classes of microorganisms and microbial
metabolism particularly in strain acquisition and selection
for wastewater treatment
Apply the microbial principles in the utilization and control
of microbes
Distinguish between biotic and abiotic components of
ecosystems and explain their role in nature.
Analyses energy flow through ecosystems and nutrient
cycles as regulators of ecosystem activity to assess changes
in ecosystems.
M.T. Madigan, J.M. Martinko and J. Parker (1997). Brock
Biology of Microorganisms. Prentice-Hall International.
R.M. Maier, I.L. Pepper and C.P. Gerba (2000).
Environmental Microbiology. Academic Press.
G. Bitton (1994). Wastewater Microbiology. John- Wiley and
Sons
Miller G T, ‘Essentials of Ecology 2nd Edition’, Thomson
Brooks/Cole, 2004.
Audesirk T and – Audesirk G, Biologi: Life on Earth 6th
Edition’, Prentice Hall International Edition, 2001.
Course Pro-forma
Code
KAES1148
Title
Ecological Field Trip
Pre-requisite
None
78 hours
Credit
2
Learning Outcomes
1.
2.
3.
4.
5.
Synopsis
Assessment
References
Introduction to the basic concepts in ecology which students
have learnt in their Ecology course, physical and biotic
environment, complexity and diversity of the physical and biotic
factor of a river system, basics mapping of a river system, water
quality analysis, identifying fauna and flora within the river
ecosystem and identifying habitats, niches and components of
ecosystem
6.
7.
Soft Skills
Identify the complex ecological processes and estimate
species diversity in aquatic and terrestrial habitat
Recognize the physico-chemical parameters of the different
habitat and relate to the diversity of the organisms.
Identify how human activities disturb the habitat and affects
the quality of the environment
Measure river profile and the hydraulic characteristics of a
stream.
Demonstrate critical thinking skills, writing skills and
collaborative skills to work together on group project.
Miller G T,Essentials of Ecology 2nd Edition, Thomson
Brooks/Cole, 2004.
Audesirk T and – Audesirk G, Biologi: Life on Earth 6th
Edition’, Prentice Hall International Edition, 2001.
Lifelong learning and Information Management (LL1, LL2)
Course Pro-forma
Code
KAES1151
Title
Fluid Mechanics
Pre-requisite
None
120 hours
Credit
3
Learning Outcomes
1.
2.
3.
4.
5.
Synopsis
Assessment
References
This course aims to introduce the fluid mechanics and establish
its relevance in civil engineering. It starts with the definition of
fluid properties, Pascal law and pressure measurement. The
underlying concept of fluid statics and dynamics, the relevant
equations and their application are then discussed. Ended with
the analysis of flowing fluid in pipelines.
1.
2.
3.
4.
Soft Skills
Define fluid properties, Pascal law, and able to describe
relationship between pressure and elevation
Compute hydrostatic pressure and forces on submerged
surfaces/objects.
Describe the fundamental equations of fluid dynamics, i.e.
the continuity, Bernoulli, and momentum equations, and
able to apply the Bernoulli and momentum equations for
various problems.
Recognize the type of flow in pipelines, compute the energy
grade line, energy losses energy added and extracted.
Apply and solve problems in simple and compound pipelines
Douglas, J.F., J.M. Gasiorek, and J.A. Swaffield (2001).Fluid
Mechanics 4th edition. Prentice-Hall
Mott, R.L. (2000). “Applied Fluid Mechanics – 5th edition”.
Prentice- Hall.
Chadwick, A. and J. Morfett (1998).Hydraulics in Civil and
Bachelor of Engineering (Environmental) 3rd edition. E & FN
Spon (imprint of hapman and Hall).
Roberson, J.A. and C.T. Crowe (1985).Engineering Fluid
Mechanics. Houghton Mifflin, Boston
Critical Thinking and Problem Solving Skill (CT1, CT2, CT3)
Course Pro-forma
Code
KAES2136
Title
Soil Mechanics
Pre-requisite
None
120 hours
Credit
3
Learning Outcomes
1.
2.
3.
4.
5.
Synopsis
Assessment
References
The course introduces soil as engineering material. It includes
brief introduction on soil formation and its physical
characteristics. Also includes identification, classification and
description of soil for engineering purposes. Application of
mechanics on soil such as phase relationship, compaction,
permeability and seepage, stresses, effective stresses,
compression and strength are also covered.
1.
2.
3.
4.
5.
Soft Skills
Define soil as in engineering context and relate problems
associated with the definition with local soil condition
Identify and differentiate the different types of soil and their
properties and classify soil using British and / or Unified Soil
Classification System
Conduct laboratory tests for determination of soil index, soil
compaction, soil compression and soil strength
Solve calculation problem using mechanics involving physical
properties, compaction, seepage, effective stress,
compression and strength.
Show the use of soil mechanics concepts in engineering
works
R. F. Craig,Soil Mechanics, E & FN Spon, 1997.
B. M. Das, ‘Principles of Geotechnical Engineering’, PWS,
1998.
R. D. Holtz & W. D. Kovacs,Introduction to Geotechnical
Engineering, Prentice Hall, 1981.
D. P. Coduto,Geotechnical Engineering Principles and
Practices, Prentice Hall, 1999.
M. Budhu,Soil Mechanics & Foundations, Wiley, 1999.
Critical thinking and problem solving skills (CT1,CT2,CT3)
Course Pro-forma
Code
KAES2144
Title
Environmental Chemistry
Pre-requisite
None
122 hours
Credit
3
Learning Outcomes
1.
2.
3.
4.
Synopsis
Assessment
References
Introduction to thermodynamic, kinetics, stoichiometry,
equilibrium, organic compound, titration, standard solutions.
Water and wastewater parameters
1.
2.
3.
Soft Skills
Identify the basic terms and principles and solve problems
based on basic concepts of general chemistry.
Apply the principles of physical chemistry and equilibrium to
calculate variables in liquid solutions and gas mixture.
Apply the theories of acid and bases to make standard
solutions.
Measure the water and wastewater parameters using the
appropriate techniques and concepts
Sawyer, C.N., Mc Carty, P.L. Parkin, G.F.,Chemistry for
Bachelor of Engineering (Environmental), 5ed Edition,
McGraw Hill, 2003 (Call Number: TD193 SAW)
Benjamin, Mark M., “Water Chemistry”, McGraw Hill,
International Edition, 2002. (Call Number: GB855 BEN)
Teh Fu Yen,Environmental Chemistry: Chemical Principles for
Environmental Processes, Prentice Hall, 1999. (Call Number:
TD193 YEN)
Course Pro-forma
Code
KAES2217
Title
Reinforced Concrete Design
Pre-requisite
KAEA1121, KAEA1122
160 hours
Credit
4
Learning Outcomes
1.
2.
3.
4.
Synopsis
Assessment
References
Concept of reinforced concrete (r.c.) design. Introduction to the
design of rectangular r.c. beam using the elastic method.
Differences in the design approaches based on the elastic and
limit state methods. Analysis and design of rectangular and
flanged r.c. beams to resist flexure using the Limit State
approach. Design of shear reinforcements for r.c. beams.
Controlling deflections and crackings in r.c. beams. Simple
curtailments, anchorages and detailings of r.c. structures. Design
of one way r.c. slabs. Design of simple r.c.columns. Design of
simple r.c.footings.
1.
2.
Soft Skills
Explain the underlying concepts and behaviour of reinforced
concrete as structural material.
Apply the elastic method to design simple reinforced
concrete beams.
Design simple r.c structural elements such as beam, slabs,
colums and footing using the Limit State Method
Produce simple calculations, drawings and detailing of
reinforced concrete structures.
Mosley and Bungey,Reinforced concrete design, MacMillan
Press. (Latest Edition).
MacGinley and Choo, ‘Reinforced Concrete - Design Theory
and Examples’, E & F Spon, Second Edition 1997.
Teamwork Skills ( TS1, TS2)
Course Pro-forma
Code
KAES3146
Title
Air and Noise Pollution
Pre-requisite
None
120 hours
Credit
3
Learning Outcomes
1.
2.
3.
4.
5.
6.
7.
Synopsis
Assessment
References
Air quality definition, general issues of air pollution. Sources,
types and impacts of air pollutants. Meteorological and
dispersion of air pollution. Air pollution management and control
strategies. Noise pollution general aspects and control methods.
1.
2.
3.
Soft Skills
Identify the sources, types and impacts of air pollutants on
various categories of recipients.
Recognise the need for sampling and monitoring and
analysis of air pollutants both in the ambient air and form
source emissions
Explain the role of meteorology and dispersion of air
pollutants.
Apply simple Gaussian dispersion Methodl (Turnur Methodl)
to calculate air pollutants concentration.
Recognise the types and sources and effects of noise
pollution.
Discuss different methods of noise analysis and calculation of
sound and noise levels
Identify the strategies and control technologies for air and
noise pollution
Boubel,R.W., Fox, D.L., Turner, D.B., & Stern, A.C., 3 ed.
Fundamentals of Air Pollution, Academic Press, 2000
De Nevers, N., Air Pollution Control Engineering, 2ed,
McGraw-Hill, 2003
Godish, T., Air Quality, Lewis Publishers, 1991
Course Pro-forma
Code
KAES3191
Title
Industrial Training
Pre-requisite
None
200 hours
Credit
5
Learning Outcomes
1.
2.
3.
Synopsis
Assessment
References
Soft Skills
Apply engineering knowledge in practice
Communicate effectively
Practice good work and safety
This course gives the student a possibility to apply and practice
the knowledge learnt in theory to develop their skills in working
independently. During the training period the student gets
familiar with a specific area of the specialisation alternatives of
the degree programme. The training deepens students
knowledge, trains them for the professional tasks and
complements the studies.
None
Course Pro-forma
Code
KAES3218
Title
Structural Steel Design
Pre-requisite
KAEA 1121
KAEA 1122
121 hours
Credit
3
Learning Outcomes
1.
2.
3.
4.
Synopsis
Assessment
References
Structural steel behaviour and design technique of welding builtup sections for Compound Beams, Plate Girder, Axially, Uniaxially, and Bi-axially loaded Columns, Rigid, Simi-Rigid
Connections & Gusseted column bases in accordance with
BS5950; Conducting a Steelwork design workshop for long-span
industrial metal building.
1.
2.
3.
4.
5.
Soft Skills
Identify the essential knowledge of structural steel
properties and steel design philosophy
Apply the relevant Code of practice for Steel Buildings Design
and Constructions.
Design the flexural, tension, compression steel members of
long span buildings and constructions using the built-up
section technique and welding connections.
Design of built-up steel members in long span structures.
T.J. MacGinley & T.C. Ang,Structural Steelwork Design to
Limit State Theory, Butterworth Heinemann, 1993.
G.W.Owens & P.R. Knowles,”Steel Designers’ Manual”,
Blackwell Science, 5th Edition, 1994,
W.M.C. MacKenzie, Design of Structural Steelwork to BS
5950 and C-EC3, MacMillan Press, 1998,
British Standards BS 5950: Part 1,
British Standards BS 6339: Part 1 & 2.
Teamwork (TS1, TS2)
Course Pro-forma
Code
KAES3235
Title
Geotechnics
Pre-requisite
None
122 hours
Credit
3
Learning Outcomes
1.
2.
3.
4.
5.
Synopsis
Assessment
References
Slope stability analysis, soil bearing capacity and shallow
foundation, pile foundation, earth pressure and earth retaining
structures, geotechnical aspects of landfill, site investigation
practice.
1.
2.
Soft Skills
Determine the stability and safety of slopes.
Identify foundation types and foundation stability criteria
and evaluate bearing capacity and pile capacity
Analyse lateral earth pressure exerted on earth retaining
structures.
Recognize geotechnical aspects of landfill system for waste
disposal
Recognise different SI methods for different engineering
applications.
Braja M. Das,Principle of Geotechnical Engineering, 4th
Edition, PWS Publishing Co., Boston, 1998.
Tomlinson M. J, ‘Foundation Design and Construction’, 6th
Edition, Longman Scientific & Technical, 1995.
Critical thinking and problem solving skills. (CT1, CT2)
Course Pro-forma
Code
KAES3244
Title
Contaminant Transport
Pre-requisite
KAES2144 Environmental Chemistry
80 hours
Credit
2
Learning Outcomes
1.
2.
3.
Synopsis
Assessment
References
Introduction to environmental Methodling and concepts of
physical-chemical phenomena in contaminant transport.
Describe the fate and transport of chemicals by quantifying their
reactions, speciation and movement in air, water, and soil media.
Examine the impacts of contaminants in air, water and soil on
plants, animals, and humans.
1.
2.
3.
4.
Soft Skills
Recognise and apply the concept of transport phenomena,
chemical reaction kinetics and equilibrium chemical
Methodling in contaminant transport.
Recognise and apply the concept of transport phenomena,
chemical reaction kinetics and equilibrium chemical
Methodling in contaminant transport.
Describe and discuss the impacts of contaminants in air,
water and soil on plants, animals, and humans.
Schnoor, J.L. Environmental Methodlling: Fate and Transport
of Pollutant in the Environment. A Wiley Interscience
Publication. John Wiley & Sons, Inc.
Logan, B.E. Environmental Transport Processes. John Wiley &
Sons, Inc.
Rich, L.G. Environmental Systems Engineering. McGraw-Hill
Kogakusha.
Chapra, S.C. Surface Water Quality Methodlling. The
McGraw-Hill Companies Inc.
Communication Skills (CS1)
Course Pro-forma
Code
KAES3245
Title
Environmental Health and Engineering
Pre-requisite
KAES1147
Engineers
80 hours
Credit
2
Learning Outcomes
1.
2.
3.
Synopsis
Assessment
References
Discuss environmental health in the tropics and relate to
water supply, sanitation and social practices.
Identify human activities contributing to pollution of water,
air, soil and spreading of diseases
Analyse various pollutants and other hazards in nature and
indoors and identify measures to reduce pollution
Health in the tropics, water supply and sanitation, diseases
transmitted by microbes, vectors and other agents. Pollutants
and other hazards in nature and indoors. Human activities
contributing to water, air and soil pollution, and controlling these
pollution.
1.
2.
3.
4.
Soft Skills
Microbiology and Ecology for Environmental
Feachem R, McGary M and Mara D,Water, Wastes and
Health in Hot Climates, ELBS and Wiley, Chichester, 1977.
(Call Number: TD153 WAT)
Madigan M T and Martinko J M, ‘Brock Biology of
Microorganisms 11th Edition’, Pearson Prentice Hall
International Edition, 1991. (Call Number: QR41.2 Bro)
Davis, Mackenzie L., Masten, Susan.,Principles of Bachelor of
Engineering (Environmental) and Science. McGraw Hill,
International Edition, 2004. (Call Number: TD145 DAV).
Vesilind, O. Aarne., Peirce, J. Jeffrey., Weinrt, Ruth
F.,Bachelor of Engineering (Environmental). 3rd Edition.
Butterworth Heinemann, 1993. (Call Number: TD146 VES)
Course Pro-forma
Code
KAES3247
Title
Chemical Process Principles
Pre-requisite
KAES2144 Environmental Chemistry
120 hours
Credit
3
Learning Outcomes
1.
2.
3.
Synopsis
Assessment
References
Principles of unit operations. Fundamentals of material balances
process classification, material balance calculations, balances on
multiple unit processes, recycle and bypass, balances on reactive
systems, combustion reactions. Single phase systems ideal
gases, equations of state for nonideal gases, compressibility
factor. Multiphase systems Gas-liquid systems: one condensable
component, multicomponent gas-liquid systems, equilibrium
between two liquid phases.
1.
2.
3.
Soft Skills
Differentiate various process operations and relevant
parameters.
Demonstrate unit conversions in calculations of process
variables for different types of processes
Apply the principles of material balance to solve for
unknown process variables in single-phase, multiphase, nonreactive, and reactive systems.
Felder, R.M. and R.W. Rousseau,Elementary Principles of
Chemical Processes, John Wiley and Sons, Inc. 3rd Edition
2000.
Luyben, W.L. and Wenzel, L.A., Chemical process Analysis:
Mass and Energy Balances, Prentice Hall, 1988
Coulson, J.M and Richardson, J.F Chemical Engineering, Third
Edition.
Course Pro-forma
Code
KAES4143
Title
Environmental Impact Assessment
Pre-requisite
None
80 hours
Credit
2
Learning Outcomes
1.
2.
3.
4.
5.
Synopsis
Assessment
References
The fundamentals and principles of environmental impact
assessment, its procedure, methodology, guidelines, report
preparation, monitoring and post auditing are introduce
1.
2.
3.
4.
Soft Skills
Define the concept of environmental impact assessment and
its application in fulfilling sustainable development.
Identify the relevant Malaysian environmental legislation
related to environmental impact assessment.
Apply the principles and procedures of environmental
impact assessment to evaluate the degree of environmental
impacts from a particular project.
Prepare an environmental impact assessment report in
accordance to the standard requirement.
Evaluate the environmental impacts due to differing types of
development projects
Canter, L.W.,Environmental Impact Assessment McGraw Hill
Inc.
CIRIA, 1994 “Environmental Assessment”, Construction
Industry, Research and Information.
Morris, P. and Therivel, R. (2000) method of Environmental
Impact Assessment. 2nd ED. Spon Press.
Glasson, J., Therivel, R. and Chadwick, A. (2005). Introduction
to Environmental Impact Assessment. 3rd ED. Routledge.
Ethics and Professional Moral (EM1, EM2)
Course Pro-forma
Code
KAES4248
Title
Wastewater Treatment
Pre-requisite
KAES2144, KAES3245
120 hours
Credit
3
Learning Outcomes
1.
2.
3.
4.
5.
Synopsis
Assessment
References
Environmental pollution due to wastewater from domestic and
industrial sources. Flow estimation and waste characterisation;
Collection systems and disposal into rivers. Principles of
wastewater treatment, design, infrastructure & equipment.
Physical, chemical & biological treatment and sludge disposal.
1.
2.
3.
4.
Soft Skills
Identify polluting waste components, impacts and pollution
prevention strategies according to regulatory requirements
& current best practices.
Illustrate pollution characteristics and provide load
estimation
Apply wastewater treatment design techniques to give best
overall performance and cost
Apply the theories of physical, chemical and biological
treatments when providing the requisite design objectives.
Appraise factors leading to process plant failures &
prevention.
Malaysian Standard 1991. MS1228: 1991. Code of practice
for design and installation of sewerage systems. SIRIM.
Metcalf and Eddy, Inc., 2003. Wastewater engineering,
treatment and reuse. 4th Edition, McGraw-Hill, Boston.
MHLG, SSD and MWA, 1998. Guideline for Developers.
Volume 4: Sewage Treatment Plants. 2nd Edition. Jabatan
Perkhidmatan Pembetungan, Kementerian Perumahan dan
Kerajaan Tempatan, Kuala Lumpur.
Qasim, S.R., 1998. Wastewater Treatment Plants: Planning,
Design, and Operation, 2nd Edition, CRC Press.
Course Pro-forma
Code
KAES4253
Title
Solid Waste Management
Pre-requisite
KAES2144, KAES3245
121 hours
Credit
3
Learning Outcomes
1.
2.
3.
4.
5.
Synopsis
Assessment
References
Classification and properties of municipal solid waste, solid waste
management components, landfill, incineration, zero-waste
concept, green productivity, minimisation and continuous
development, acts and guideline.
1.
2.
Soft Skills
Identify sources of solid waste generation, quantity,
characteristics and pollution effect toward the environment
and public health.
Distinguish the technology and methodology used to treat
solid waste.
Explain the concept of recycling, waste minimization and
zero disposal including the production of refuse derived fuels
(RDF), composting and biogas.
Apply the principles of design and operation of landfills
including leachate and gas control.
Evaluate the legal and institutional framework pertaining to
municipal solid waste in Malaysia
George Tchobanoglous et al.,Integrated Solid Waste
Management, McGraw-Hill, Singapore, 1993
Peavy H.S., Rowe D.R and Tchobanoglous G, “Bachelor of
Engineering (Environmental)”, McGraw-Hill Book Company,
1985
Professional Ethics and Moral (EM 1, EM2)
Course Pro-forma
Code
KAES4257
Title
Water Supply Engineering
Pre-requisite
KAES 1151 (Fluid Mechanic)
82 hours
Credit
2
Learning Outcomes
1.
2.
3.
4.
Synopsis
Assessment
References
Introduction to basic facts of water supply engineering worksquality and quantity of water-water treatment system and
processes-water collection and distribution systems.
1.
2.
3.
4.
Soft Skills
Identify various activities of water supply engineering and
the availability of water
Estimate the water quantity and to become familiar with
water quality criteria.
Design the collection and distribution networks of water
supply System
Employ a suitable method for water treatment
McGhee, T.J. (1991) Water Supply and Sewerage 6th
edition, McGraw Hill International Edition
Hammer, M.J (2001) Water and Wastewater Technology,
Prentice-Hall.
Viessman, W.Jr. and Hammer, M.J. (1998) Water Supply and
Pollution Control. Addison-Wesley Longman.
Syed R.Qasim, Edward m. Motley and Guang Zhu (2000)
Water works engineering (Planning, design and operation),
Prentice Hall PTR.
Course Pro-forma
Code
KAES4281
Title
Thesis
Pre-requisite
Have completed a minimum of 80 credits
242 hours
Credit
6
Learning Outcomes
1.
2.
3.
4.
5.
Synopsis
Assessment
References
This course requires students to undertake a research project on
a chosen topic in Civil Engineering under the supervision of an
academic staff. Research can be conducted in the form of
literature review, experimental study, Methodlling, simulation,
computational, case study, survey, etc. Research findings should
be reported in the form of introduction, objectives of research,
scope of study, literature review, research methodology, data
collection/experimental work, data analysis, results and
discussions, conclusions and recommendations, and references.
A scientific report in the form of a thesis should be submitted at
the end of the research and the student is required to
communicate the findings of the research through an oral
presentation.
1.
2.
Soft Skills
Design a research methodology based on a pre-selected
topic
Conduct independent study on the research topic
Synthesize the relevant information and knowledge related
to the study
Recommend the possible conclusions of the study
Demonstrate good written and oral communication skills
Garis Panduan Tesis, Versi 1, January 2005, Jabatan
Kejuruteraan Awam, Fakulti Kejuruteraan, Universiti Malaya.
Related reference materials and articles in Books, Journals,
Conference Proceedings, Monographs, Manuals, Standards,
etc.
Continuous Learning and Information Management (LL1, LL2)
Entrepreneurial Skills (KK1)
Ethics and Professional Moral Skills (EM1, EM2)
Course Pro-forma
Code
KAES4283
Title
Integrated Design
Pre-requisite
Have completed a minimum of 90 credits
200 hours
Credit
5
Learning Outcomes
1.
2.
3.
4.
Synopsis
Assessment
References
Soft Skills
Design a civil or environmental engineering project after
going through different stages of conceptualizing and
planning.
Integrate information, ideas, and concepts from previous
courses into a comprehensive design effort
Function effectively on a multidisciplinary team
Communicate effectively, in both oral and written forms.
Projects covering the different options in civil or Bachelor of
Engineering (Environmental) and selected according to emphasis
areas of each student when registering for course eg. road
design, water supply system, etc. Actual projects are used which
are obtained from government agencies, consulting firms, and
other sources. When possible, engineers engaged in professional
practice are involved as consultants or clients
None
Communication Skills (CS1,CS2,CS3)
Critical Thinking and Problem Solving (CT1,CT2,CT3)
Teamwork (TS1,TS2)
Continuous Learning and Information Management (LL1,LL2)
Leadership Skill (LS1,LS2)
Course Pro-forma
Code
KAEA4338
Title
Geo-Hazards
Pre-requisite
None
80 hours
Credit
2
Learning Outcomes
1.
2.
3.
4.
5.
Synopsis
Assessment
References
Geo-hazards and mitigation; physical hazards (landslide, erosion,
sinkholes, swelling soil, earthquakes); ground and groundwater
contamination; introduction to ground remediation techniques;
field instrumentation and monitoring.
1.
2.
3.
Soft Skills
Identify major geohazards that engineers have to deal with
and recall the general procedures and programme in
undertaking mitigation measures
Discuss the causes and processes of major physical hazards
and develop plan for appropriate mitigation measures
Discuss the causes and processes involve in ground and
groundwater contamination.
Explain available contaminated ground remediation
techniques.
Apply different field instrumentation techniques for different
engineering problems
A Brief Note on Geo-hazards (lecture notes)
Braja M. Das, ‘Principles of Geotechnical Engineering’, 4th
Edition, PWS Publishing Co, Boston, 1998.
Tomlinson M. J,Foundation Design and Construction, 6th
Edition, Longman Scientific & Technical, 1995.
Profesional ethics and moral skill (EM1, EM2)
Course Pro-forma
Code
KAEA4345
Title
Urban Mass Transit System
Pre-requisite
None
81 hours
Credit
2
Learning Outcomes
1.
2.
3.
4.
5.
Synopsis
Assessment
References
History and role of mass transit, modes of mass transit, planning
and design of transit networks, management and operation of
transit, transit and urban development, energy and environment
impacts and case studies.
1.
2.
3.
Soft Skills
Describe the history, roles and modes of urban mass transit
Identify the latest technology advancement in urban mass
transit system
Identify queuing systems that are available for transit service
Interpret procedures of urban mass transit planning and the
operation and management of urban mass transit systems
Relate the energy and environmental impacts to the urban
mass transit system
Vuchic, V.R.: Urban Public Transportation.
Gray and Hoel: Public Transportation: Planning Operation
and Management.
Alan Black: Urban Mass Transportation Planning.
Life-long learning and information management (LL1, LL2)
Course Pro-forma
Code
KAEA4346
Title
Highway Planning and Road Safety Audit
Pre-requisite
None
80 hours
Credit
2
Learning Outcomes
1.
2.
3.
Synopsis
Assessment
References
Introduction to highway planning, Geometrical design of roads,
Highway capacity: Definitions & Level of service, Capacity design
of freeway section, Capacity design rural two lane highway,
Forecasting travel demand: Definitions & Trip generation,
Forecasting travel demand: Trip distribution, Forecasting travel
demand: Mode Choice, Forecasting travel demand: Traffic
Assignment, Introduction to Road Safety Audit Stage 1-5.
1.
2.
3.
4.
Soft Skills
Recognise the organisations and the importance of highway
planning
Estimate travel demand using trip generation, distribution,
mode choice and trip assignment methods.
Describe the different stages in Road Safety Audit and the
elements of each stage.
Traffic and highway engineering / Nicholas J. Garber, Lester
A. Hoel. Pacific Grove, Calif. : Brooks/Cole Pub. Co., 2002. 3rd
ed.
Transport planning and traffic engineering / edited by C.A.
O’Flaherty; contributing authors, MGH Bell ... [et al.].
London: Arnold ; New York : Wiley, 1997.
Highway engineering / Paul H. Wright; with contributions by
James S. Lai ... [et al.] New York: J. Wiley, 1996. 6th ed.
Guidelines for The Safety Audit of Roads and Road Project in
Malaysia, REAM.
Course Pro-forma
Code
KAEA4357
Title
Surface Water Hydrology
Pre-requisite
Credit
Learning Outcomes
Synopsis
Assessment
References
Soft Skills
KAEA 1151 (Fluid Mechanic)
KAEA 2256 (Open Channel Hydraulics)
80 hours
2
1.
2.
3.
4.
Define the fundamental of the hydrological process
Identify the fundamentals to perform the computation
Analyze flood hydrograph unit and flood routing
Apply risk analysis and flood frequency analysis
The course in design to give an in-depth introduction to surface
water hydrology both of the pralines and of some of the
important techniques.
Hydrology by V.T Chow, Maidments and Mays, McGraw Hill
Course Pro-forma
Code
KAES4345
Title
Environmental Risk Management
Pre-requisite
None
80 hours
Credit
2
Learning Outcomes
1.
2.
3.
4.
5.
Synopsis
Assessment
References
Concepts and principles of Environmental Risk Assessment,
Environmental Risk Management: Identification, Evaluation and
Control Techniques. Chemical and Health Risk are also included.
1.
2.
3.
Soft Skills
Define the various definitions and concepts related to
Environmental Risk Management
Explain the various stages in environmental risk
management
Classify risk and develop rating criteria
Study the pathway for risk transportation
Evaluate the health impact of environmental risks in
particular cancer risks
Keith Smith,Environmental Hazards Assessing Risk and
Reducing Disaster, Routledge, 2001
Ronald Eisler, “Handbook of Chemical Risk Assessment –
Health Hazards to Humans, Plants and Animals”, Lewis
Publishers, 2000
Lerch and Paleologis,Environmental Risk Analysis, McGrawHill, 2001
Course Pro-forma
Code
KAES4349
Title
Hazardous Waste Management
Pre-requisite
None
80 hours
Credit
2
Learning Outcomes
1.
2.
3.
4.
5.
Synopsis
Assessment
References
Introduction to history, definition, acts and regulations related to
hazardous wastes. Fate and transport of chemical pollutants in
environments. Management and treatment techniques of
hazardous waste.
1.
2.
3.
4.
Soft Skills
Identify hazardous waste components according to
regulatory requirements.
Define fate and transport of chemical contaminants in
environments
Applies physical, chemical and biological treatments to the
management of hazardous wastes
Applies strategy and theories for the design of treatment
facilities
Appraise other alternative techniques such as pollution
prevention (P2) or natural attenuation.
LaGrega, Michael D. Hazardous Waste Management, 2nd
Edition, McGraw Hill, 2001. (Call Number: TD1030 LAG)
Blackman, William C. Basic Hazardous Waste Management,
3rd Edition, Lewis Publishers, 2001. (Call Number: TD1040
BLA)
Wentz, Charles A. Hazardous Waste Management, 2nd
Edition, McGraw Hill, 1995. (Call Number: TD1030 WEN)
A series 12 papers on Landfill Continuing Education Course,
2002, published in Waste Age, accessible through internet at
www.wasteage.com.
Profesional ethics and moral (EM1, EM2)
Course Pro-forma
Code
KAES4350
Title
Environmental Management System
Pre-requisite
None
80 hours
Credit
2
Learning Outcomes
1.
2.
3.
4.
5.
Synopsis
Assessment
References
Environmental management systems and the concept of
sustainable business, development and pollution prevention are
introduced. The effect of the ISO 14000 series of standards
toward environmental management, business and trade are
discussed. The 17 principal elements and the process of
certification are elaborated. Environmental audit, environmental
management, life cycle assessment program, the impacts of
standardization and implementation strategies for ISO 14001 are
discussed.
1.
2.
3.
Soft Skills
Describe the concept of environmental management system
(EMS) and apply the principles to actions and policies related
to sustainable development.
Identify all the characteristics of the series of ISO 14000
environmental management standards.
Differentiate all the 17 important elements of the ISO 14001
with its application and methods of implementation
Formulate an audit and monitoring program leading towards
the process for certification.
Apply the principles of environmental management systems
standards for developing countries and devise strategies to
overcome barriers in implementation.
Welford, R. (1996) Environmental Management and Business
Strategy, UK
Willig and Phillip (1997) Moving Ahead with ISO 14000, John
Wiley and Sons, New York.
Barrow, C. J. (2006) Environmental Management for
Sustainable Development. Routledge
Communication skill (CS1, CS2, CS3)
Teamwork skill (TS1, TS2)
Leadership skill (LS1, LS2)
Course Pro-forma
Code
KAES4351
Title
Occupational Safety and Health
Pre-requisite
None
80 hours
Credit
2
Learning Outcomes
1.
2.
3.
4.
Synopsis
Assessment
References
Cover the basics safety and health professionals need to
understand before responsibility for reducing hazard and
protecting environmental aspect. The goal is to balance the
management of safety with the relevant science and the practical
aspects of complying with regulations. Safety and health of
workers and public. Malaysian occupational Safety and Health
Act, Environmental, quality, health and safety management.
1.
2.
3.
Soft Skills
Identify the basics needed to provide a healthy and safe
occupational environment.
Identify potential workplace safety and health hazards and
determine how to mitigate them
Determine the important legal, product liability and
associated risks related to civil law
Relate OSHA information standards for safety and
environmental management
J.
P.
Kohn,
M.
A.
Friend,
and
C.
A.
Winterberger,Fundamentals of Occupational Safety and
Health, Government Institutues, Inc. Rockville Maryland,
1996.
Goetsch D L, ‘Occupational Safety and Health 5th Edition’,
Pearson Prentice Hall International Edition, 2005.
Geotsch D L,Occupational Safety and Health for
Technologist, Engineers, and Managers, 6th Ed., Pearson
Prentice Hall, 2008.

Course - Faculty of Engineering, University of Malaya

Transcription

Similar documents

Course - University of Malaya

here - HKUST Business School

Booking Form_Corected

SW02400001K

Page 14 - Fruitport Area News

Page 12

When Colette Foisy-Doll arrived in Qatar last year

Argentina Brazil Chile Colombia Ecuador Mexico Peru Trinidad

Make a - International University of Grand

B.C. SECTION NEWSLETTER

Maznah Zolkifli.com.my