Final Program

2011
Istanbul
TURKEY
Final
Program
ISTANBUL
TECHNICAL
UNIVERSITY
http://www.etc9.itu.edu.tr
http://www. euroturbo.eu
Fluid Dynamics And Thermodynamics
21 - 25 March
TURBOMACHINERY
9th EUROPEAN CONFERENCE ON
Copyright: Bryon Paul McCartney 2009; Alstom 2009
9th European Conference on
TURBOMACHINERY
Fluid Dynamics and Thermodynamics
21-25 March 2011
Istanbul, Turkey
Sponsors:
EUROPEAN COMMISSION
ISTANBUL TECHNICAL
UNIVERSITY
GENERAL ELECTRIC
TUSA ENGINE INDUSTRIES,
INC.
MAS GROUP
ALARKO CARRIER
STANDART PUMP AND
WATER BOOSTER SYSTEMS
TÜRBOSAN A. .
VANSAN
WATER TECHNOLOGIES
CD-ADAPCO
ANSYS
CFTURBO
SOFTWARE & ENGINEERING
GRUNDFOS
NUMECA
http://www.etc9.itu.edu.tr/
http://www.euroturbo.eu
ETC 9
9th European Conference on TURBOMACHINERY
Fluid Dynamics and Thermodynamics
21-25 March 2011 – Istanbul, Turkey
The European Organising Committee
Chairman of the Committee:
Prof. G. Bois, Arts et Métiers-ParisTech, Lille (F)
Paper Review Chairman:
Prof. M. Manna, Univ. Naples (I)
Chairman of the Local Organising Committee:
Prof. M. Sen, Istanbul Technical University,
Istanbul (TR)
Conference comittee (Local organisation Istanbul)
Prof. E. Ayder, ITU (TR)
Asst. Prof. M. Cakan, ITU (TR)
Conference secretary (Local organisation Istanbul)
Res. Asst. A. Ilikan, ITU (TR)
Correspondance (Local organisation Istanbul)
Res. Asst. M. A. Temiz, ITU (TR)
Members:
Prof. T. Arts,
VKI, Rhode-SaintGenèse
(B)
Prof. L. Bakken,
NTNU, Trondheim
(N)
Prof. D. Bohn,
RWTH, Aachen
(D)
Prof. G. Bois,
ENSAM, Lille
(F)
Prof. G. Dibelius,
Aachen
(D)
Prof. P. Doerffer,
Polish Academy of
Sciences, Warsaw
(PL)
Dr. M. Dumas
SAFRAN (Snecma)
(F)
Prof. T. Fransson,
KTH, Stockholm
(S)
Prof. V. Gnesin,
NASU, Kharkov
(UA)
Prof. A. Granovskiy,
ALSTOM Power
Uniturbo, Moscow
(RUS)
Prof. F. Heitmeir,
Graz Univ. Tech.
(A)
Prof. H. Jericha, Graz
Univ. Tech.
(A)
Prof. J. Larjola,
Lapperenranta
Univ. of Tech
(FIN)
Prof. O. Léonard
Univ. Liège,
(B)
Prof. Y. Levy,
Technion, Haifa
(IL)
Prof. M. Manna,
Univ. Naples
(I)
Prof. F. Martelli, Univ.
Florence
(I)
Dr. R. Miller,
Univ. Cambridge
(GB)
Prof. V. Molnar,
Slovak Tech. Univ.,
Bratislava
(SK)
Dr. P. Ott,
EPFL, Lausanne
(CH)
Prof. K. Papailiou,
NTUA, Athens
(GR)
Mr. C. Scrivener,
Consultant to RollsRoyce, Derby
(GB)
Prof. M. Sen,
Tech. Univ. Istanbul
(TR)
Prof. J. Seume,
Univ. Hannover
(D)
Prof. C.H. Sieverding,
VKI, Rhode-SaintGenèse
(B)
Prof. M. Stastny,
Plzen
(CZ)
Prof. J. Vad,
Univ. Budapest
(H)
Prof. J.P. Van Buijtenen,
Dr. R. Vazquez Diaz,
ITP, Madrid,
(E)
Dr. E. Walsh,
Univ. Limerick
(IRL)
Tech. Univ. Delft
(NL)
Secretary (ETC General)
Prof. T. Arts, VKI, Rhode-Saint-Genèse (B)
Associated Engineering Associations:
Association of Czech Mechanical Engineers (CZ)
Associazione Termotecnica Italiana (I)
Komitet Problemow Energetyki P.A.N. (PL)
Koninklijke Vlaamse Ingenieursvereniging (B)
Institution of Engineers in Ireland (IRL)
Institution of Mechanical Engineers (GB)
Norsk Forening for Termiske Strømningsmaskiner (NFTS) (N)
Österreichischer Ingenieur- und Architekten – Verein (A)
Royal Institution of Engineers in the Netherlands (Klvl) (NL)
Société Française des Mécanicien (F)
Svenska Mekanisters Riskforbund (S)
VDI-Gesellschaft Energietechnik (D)
Greek Technical Chamber (GR)
GENERAL INFORMATION
th
The 9 European Conference on Turbomachinery Fluid
Dynamics and Thermodynamics (ETC 9) is held in
March 2011 in Istanbul (TR), beginning on Monday,
March 21 and concluding on Friday, March 25. The 5days technical program is supplemented with a series
of social events over the week fostering international
friendship, discussions and collaborative ventures.
CONFERENCE VENUE
The conference will be held in Suleyman Demirel
Cultural Center (SDKM) of Istanbul Technical
University. The Cultural Centre is across the building of
rectorate in the Maslak Campus (see map on last
page). The Auditorium hall is the University’s largest
hall and offers room for up to 460 people. It is a place
for gatherings, but also provides the setting for
graduation celebrations and other academic award
ceremonies, concerts and numerous other events.
On the one hand, having a 210 m2 lobby, 4 workshop
rooms each having 52 m2 areas, an atrium, a bar, a
restaurant and a café; Suleyman Demirel Cultural
Centre is a landmark not only in the university, but also
in the city.
Suleyman Demirel Cultural Centre (SDKM)
Istanbul Technical University
Ayazaga Campus
Maslak / 80626 Istanbul (TR)
Phone: +90-212-285-70-70
Fax: +90-212-285-70-72
TRAVEL TO ISTANBUL
By plane:
It is the most convenient way. A lot of airlines provide a
connection to ‘Istanbul – Ataturk Airport and Istanbul –
Sabiha Gokcen Airport’
FROM ATATURK AIRPORT
By taxi
Taxis are available from Atatürk Airport to Taksim
Square. The journey time may change according to the
time of day and traffic conditions (road works,
diversions etc), but allow between 30 and 45 minutes.
Cost can vary, but a typical fare during the day is
around 35.00 TL (€17.50).
By metro / tram
It is possible to use metro lines to arrive Taksim Square
from Atatürk Airport. Take M1 metro line first,
interchange to T1 tramline in Zeytinburnu Station, and
finally interchange to the F1 funicular line in Kabata
Station. It is possible to arrive Taksim in about 1 hour
and it will cost 5.25 TL (€2.65).
Timetable inquiries - phone:
+90-212-444-00-88
Timetable inquiries - Internet:
http://www.istanbululasim.com/default.asp
By HAVAS
From 04:00 am to 01:00 am, there are Hava Bus
Services from Atatürk Airport Airport to Taksim in every
30 minutes. It takes around 40 minutes and costs 10.00
TL (€5.00)
FROM SABIHA GOKCEN AIRPORT
By taxi
Taxis are available from Sabiha Gökçen Airport to
Taksim Square. The journey time may change
according to the time of day and traffic conditions (road
works, diversions etc), but allow between 60 and 75
minutes. Cost can vary, but a typical fare during the
day is around 75.00 TL (€37.00).
By public transport
Using public bus line (IETT) E-3, it is possible to go to
4. Levent metro station. Then, interchanging to the
metro line, it is possible to arrive Taksim Square in
about 2 hours time. It costs about 5.25 TL (€2.65).
Timetable inquiries - phone:
+90-212-445-07-20
Timetable inquiries - Internet:
http://www.iett.gov.tr
By HAVAS
From 04:00 am to 00:00 am, there are Hava Bus
Services from Sabiha Gökçen Airport to Taksim in
every 30 minutes. It takes around 90 minutes and costs
13.00 TL (€6.40)
By other transportation means:
If conference attendees desire to utilize other
transportation means, they should contact the local
organizing secretariat.
HOTEL ACCOMMODATION
Please make your hotel reservation using the web site
of the Conference:
http://archived.travele22.com/conferences/etc2011
Special hotels, rates and allotments have been
arranged for ETC9 Conference delegates by Travel
e22. Rooms are to booked as first-come first-served
basis. Rates cannot be guaranteed until the room is
booked through Travel e22 booking page. Please try to
finalize your booking by beginning of March 2011 in
order to guarantee your room at announced special
rates. The local organizing secretariat is proposing the
following hotels given below, most of which are
connected to the conference venue via the public
transport system. The hotel prices can be found on the
web site. More details concerning hotels are indicated
on the website of the Conference.
Point Hotel*****
Topcu Cd. No.2
Taksim / Istanbul (TR)
Phone: +90-212-313-50-00
Fax: +90-212-313-50-30
Email: info@pointhotel.com
Homepage: www.pointhotel.com
(It takes about 25 min. to SDKM by metro)
Point Hotel Taksim is located in the middle of
worldwide popular chain hotels in Taksim, Talimhane.
Point Hotel Taksim's restaurant ViewPoint is open for
breakfast, lunch and dinner and it is surrounded by the
unique view of the Bosphorus. Our Café and Udonya
restaurant is serving unique delicacies for all our
guests.
Cartoon Hotel****
Tarlabasi Boulevard No.36
80080 – Taksim / Istanbul (TR)
Phone: +90-212-238-93-28
Fax: +90-212-238-52-01
Email: info@cartoonhotel.com
Homepage: www.cartoonhotel.com
(It takes about 25 min. to SDKM by metro)
The Cartoon Hotel is located in Taksim right next to
Beyoglu pedestrian shopping and nightlife center. It has
as many as 68 rooms. It also has a very good
restaurant on the terrace floor.
Seminal Hotel****
Sehit Muhtar Cd. 23-25
80900 – Taksim / Istanbul (TR)
Phone: +90-212-297-34-34
Fax: +90-212-297-28-18
Email: info@seminalotel.com
Homepage: www.seminalotel.com
(It takes about 25 min. to SDKM by metro)
Seminal is located at Taksim, the heart of the city, with
luxurious design for your comfort in mind. 88 rooms
which all have 24 hours room service, international and
domestic direct telephone, cable TV, music
broadcasting, minibar, central air-conditioning system,
fire alarm system, bathtub are designed for your
needs.
Taslik Hotel***
Suleyman Seba Cd. No.75
34357 Macka / Istanbul (TR)
Phone +90-212-227-83-10
Fax +90-212-260-42-43
Email: info@taslikhotel.com
Homepage: www.taslikhotel.com
(It takes about 5 min. by taxi to Taksim Square)
Taslik Hotel is located at Macka, a near by region to
Taksim, right next to Besiktas Port. It has as many as
68 rooms, 24 hour room Service, special air
conditioning, mini bar, satellite TV all arronged to fulfill
all your vishes.
Facilities: 24 hr front office service, Private deposit
safe-box in-room, wireless internet, laundry, room
service, currency exchange, dry cleaning and wake-up
call. Every room has cable TV, radio, minibnar, hairdryer, double glassed window, direct telephone,
indivdiual climate control, private bath
Nil Hotel***
Tavukcu Fethi Sk. No.25
Osmanbey / Istanbul (TR)
Phone: +90-212-230-29-69
Fax: +90-212-230-29-03
Email: reservation@nilhotel.net
Homepage: www.nilhotel.net
(It takes about 20 min. to SDKM by metro)
Nil Hotel located in the Osmanbey district where the
textile market of Istanbul is situated is only a walking
distance to one of the most elegant districts in Istanbul,
Nisantasi, just 1 km away from Taksim, also known as
the cultural and shopping central and about 17 km to
Atatürk Airport.
Hotel has Wireless internet, Lobby , Bar , Generator ,
Dry Cleaning service , Telephone with a direct line , 24
hour room service , Rent a car , Hair dryer.
Bilek Hotel****
Eski Buyukdere Cd. No.29
4. Levent – Istanbul (TR)
Phone: +90-212-324-20-24
Fax: +90-212-283-90-41
Email: info@bilekistanbul.com
Homepage: www.bilekistanbul.com
(It takes about 5 min. to SDKM by metro)
The Bilek Istanbul Hotel is located in the heart of
the business world of Istanbul at your service with
a modern design and professional, outstanding hotel
service expertise. It is located in the busiest center of
Istanbul, 4.Levent District, where it is easily accessible
by either your own transportation or public
transportation.
Germir Palace Hotel”S-Class”
Cumhuriyet Cd. No.7
34437 – Taksim / Istanbul
Phone: +90-212-361-11-10
Fax: +90-212-361-10-70
Email: hotel@germirpalas.com
Homepage: www.germirpalas.com
(It takes about 25 min. to SDKM by metro)
Germir Palace is a very elegant Special Category hotel,
located in the center of the city, Taksim Square.
Walking distance from Istiklal Street, the arts, cultural
and night-life center of Istanbul. Just a short drive, 5
minutes from the Last Imperial Palace of the Ottoman
Sultans, Dolmabahce Palace. And hotel is right across
the street of Havas airport shuttles (departing every 30
minutes during daytime hours).
REGISTRATION
To register, please use the website of the Conference:
http://www.etc9.itu.edu.tr/registration.html or tick
properly the registration form enclosed at the end of the
Conference Program and send it to the Local
Organizing Tour Operator:
Travel e22
Halk Cad. 37 / 107
34700
34700 - Uskudar / Istanbul (TR)
Phone: +90-216-341-4125
Fax: +90-216-341-4127
info@travele22.com
Please note that your registration can only be accepted
if you have paid by one of the methods indicated in the
registration form. Participants may pick up the
conference material at the registration desk. Preregistration will be accepted until February 14th, 2009.
On-site Registration
A registration form to be used for on-site registration
will be available at the registration desk.
Registration Fees
The registration fees are indicated on the registration
form. All registration fees include a copy of the
conference proceedings (book and CD), coffee breaks,
the access to the conference sessions and the
Monday’s welcome reception Cocktail. The fees do not
include the conference gala dinner on Wednesday
evening, which can be booked separately on the
registration form. The day visitor fee allows attending
the conference sessions on the selected day and
includes the proceedings.
Conference Registration and Information Desk
The registration desk will be opened from 8:00 AM until
the early afternoon, from Monday, March 21 till Friday,
March 25 at the conference venue.
Conference Proceedings
The conference proceedings will be available on-site
for attendees, as well as the limited number of
additional copies will be available on-site for 50 €.
Payment
All payments on-site are required in Euros. Major credit
cards are accepted.
Enquiries
Eventual enquiries can be addressed to:
Mr M. Askin TEMIZ
Istanbul Teknik Universitesi
Makina Fakultesi
Inonu Cd. No.65
34437 – Gumussuyu / Istanbul (TR)
Phone: +90-505-846-16-15
Fax: +90-212-245-07-95
Email: mtemiz@itu.edu.tr
and
Travel e22
Halk Cad. 37 / 107
34700
34700 - Uskudar / Istanbul (TR)
Phone: +90-216-341-4125
Fax: +90-216-341-4127
info@travele22.com
Updated Information will be available at the conference
website.
THE CONFERENCE
Final Conference Technical Program
The final technical program is included in this brochure.
Speaker’s Briefing
The authors who are presenting their paper and the
session chairs will meet for a short briefing fifteen
minutes before the start of their session in the session
room. Please attend on the day of your session only.
Time of Presentation
Each paper will be allocated 30 minutes (including
introduction and question-and-answer period) except
where noted otherwise. Concurrent sessions will
maintain uniform starting times.
Audio-Visual Equipment
Each session room will be pre-set with the following
equipment: an overhead projector, a computer
projection system, a screen, a microphone and a PC.
Special audio-visual equipment which has been
requested in advance will be available.
Messages and Information
Messages will be ordered and posted on the bulletin
board in the registration area. The telephone number
for reaching the conference administration desk is +90553-611-9071
Internet
One computer with internet access is available for the
conference attendees. Free W-LAN access is provided
in the conference venue.
Exhibition
Some space (booths) is available near the session
rooms where leading companies and research
agencies will report on their products and activities.
Smoking Policy
Smoking is not allowed in the conference venue.
Restrictions
Video-taping or audio-recording of any session during
this conference is prohibited. The sale of any
publication not authorised by ETC9 is also prohibited.
Coffee breaks and lunch
Coffee, tea and biscuits are served during the coffee
breaks in the morning and in the afternoon in the
conference venue for free.
For lunch we suggest to go to one of the many
cafeterias and restaurants in ITU Campus. Also,
Istanbul’s one of the famous shopping centre, Istinye
Park can be an alternative. Information on the
restaurants can be found in your conference bag. Feel
free to make your choice.
SOCIAL EVENTS
Welcome Reception
Attendees and guests are invited to start the ETC9
Conference on Monday evening with a welcome
reception hosted by Local Organising Committee which
will give you a chance to renew acquaintances and to
meet new friends. The reception will be held from 7.00
pm at Dahill Istanbul which lies in Yildiz Park, across
Ciragan Palace.
Dahill Istanbul
Palanga Cd. Yildiz Parki, Yildiz Porselen Ici,
Besiktas / Istanbul (TR)
Phone: +90-212-227-49-28
http://www.dahillistanbul.com/
Local Organising Committee will provide free transport
from Taksim Square and ITU Campus to the Dahill
Istanbul. Also, it is possible to take a taxi. It lasts about
10 minutes from the Taksim Square and costs about 10
TL (€5.00).
Conference Gala Dinner
Wednesday night we will offer you the opportunity to
enjoy the conference gala dinner hosted in ‘Portaxe
Shine Restaurant’. It's by the breath-taking view of the
Bosporus.
Local Organising Committee will also provide free
transport from Taksim Square and ITU Campus to the
gala venue.
Other ways to reach the gala venue from Taksim sqare
is taking the public bus (40T, 42T), and getting off in
the ‘Baltalimani Station’, and taking a taxi. Public bus
takes about 40 minutes and costs 1.75 TL (€0.90); and
taxi takes about 30 minutes and costs about 60 TL
(€30).
Portaxe Shine
Baltalimani Cd. No.80
Baltalimani / Istanbul (TR)
http://www.portaxe.net
LOCAL TRANSPORT
It is advisable to travel by public transport.
Ticket sales for public busses/trams:
Akbil Booths
(In the busses) From The Driver
Automatic Token Machines
Kiosks
Tokens are for one-use only.
TECHNICAL TOURS
Two technical tours are offered on Friday afternoon:
Tour 1
- Visit of Turkish Engine Centre (TEC). Turkish Engine
Center (“TEC”) is a joint venture between Pratt &
Whitney and Turkish Technic for the maintenance
overhaul and repair of CFM56® and V2500®
engines. TEC is located at Istanbul’s 2nd international
airport Sabiha Gökçen Airport (SAW) on the
Anatolian (Asian) part.
Free transportation will be provided by the Local
Organisation Committee and will be announced at the
conference.
Tour 2
- Visit of the laboratories of Istanbul Technical
University, hosting ETC9.
Istanbul Technical University
Energy Institute
TRIGA Mark II Research Reactor
ITU, Ayazaga Campus
http://www.energy.itu.edu.tr/eng/eindex.htm
- Visit of the laboratories and test stands of Istanbul
Technical University Automotive Technologies
Research and Development Centre; one of the most
important R&D centres in Turkey, equipped with 18
test stands.
ITU, Ayazaga Campus
http://www.otam.itu.edu.tr
ACCOMPANYING PERSONS PROGRAM
Indicatively a few tours appear on the conference
website in the appropriate section, organized by the
agency supporting the ETC, which is
Travel e22
Halk Cd. No.37, Kat: 1, Ofis:107,
34700 – Uskudar / Istanbul (TR)
Phone: +90-216-341-41-25
Fax: +90-216-341-41-27
Email: info@travele22.com
Additional tours may be discussed and arranged with
the above indicated Agency.
1. Bosporus Cruise – Half Day
See both Asia and Europe at the same time, cruise
between two ancient continents, salute the Sultans’
marvellous palaces built on the shores of the Bosporus,
visit the Egyptian Bazaar.
Dates: March 20th or March 26th 2011
Starts: at 09:15 at Taksim Square
Ends: at 14:00 at Taksim Square
Price: €45 per person (min. 6 people required)
(There is an English speaking guide during the tour)
2. Half Day Old City Tour
From Byzantine to Ottomans, see the most important
places of the old city in Istanbul: Hippodrome, Grand
Bazaar (Kapali Carsi), Hagia Sophia Church and
Sultanahmet Mosque (the Blue Mosque) and have a
chance to buy souvenirs to remind you these mystical
places.
Dates: March 24th and March 26th 2011
Starts: at 09:15 or 14:00 at Taksim Square or Maslak
Campus
Ends: at 13:00 or 17:30 at Taksim Square or Maslak
Campus
Price: €39 per person (min. 5 people required)
(There is an English speaking guide during the tour)
3. Full Day Old City Tour
Spend your whole day in the fascinating buildings of
and memoires of Byzantine and Ottoman Empire. See
the Hippodrome, charmed by the unique tiles of the
Sultanahmet Mosque (the Blue Mosque), be thrilled
with the architecture of the Hagia Sophia Church, feel
the presence of the dynasty in Topkapi Palace, make
shopping in the Grand Bazaar – like Turkish people do
for centuries.
Dates: March 20th, 23rd, 26th 2011
Starts: at 09:00 at Taksim
Ends: at 17:00 at Taksim
Price: €65 per person (min. 5 people required)
(There is an English speaking guide during the tour)
4. Cappadocia Excursion (Nevsehir – Turkey)
Cappadocian region (the Land of Beautiful Horses) is
the place where the nature and history come together
with most beautiful scene in the world. While
geographic events are forming Peribacalari (fairy
chimneys), during the historical period, humans had
carried the signs of thousand years old civilizations with
carving houses and churches within these earth pillars
and decorating them with frisks.
Dates: March 25-27 or March 26-28 (other dates can
be arranged if the travelling company is contacted with)
Price: €290.00 per person (min. 4 people required)
Package Includes:
- Deluxe tour bus throughout the tour
- English speaking tour guides
- Meals: 2 breakfasts, 1 lunch, 2 dinners
- Accommodations: 3 days – 2 nights at 4-star hotel
(HB)
- Visits (including all museum entrance fees)
-Services: Hotel service charges; tips at airports, hotels
and restaurants
Package Excludes:
- Flight ticket to Nevsehir. If it is desired, the travel
company can arrange a return ticket (starting from
€85.00)
CONFERENCE PROGRAM AT A GLANCE
st
Monday, March 21
AM
PM
08.30-10.00
10.00-10.15
10.15-11.15
11.30-12.00
Registration
Opening Ceremony
Invited Lecture
Session A-01
Radial Compressors (1)
Session B-01
Secondary, Tip & Leakage Flows (Turbines) (1)
Lunch
Session A-02
Fans
Session B-02
Unsteady Flows & Blade Row Interactions (Turbines)
Coffee Break
Session A-03
Secondary Flows - Stall & Surge (Compressors)
Session B-03
Heat Transfer & Blade Cooling - Turbines (1)
Euroturbo 9 Welcome Reception
13.00-14.30
14.30-16.00
16.00-16.30
16.30-18.00
19.00-20.30
nd
Tuesday, March 22
AM
PM
08.30-09.30
09.30-10.00
10.00-12.30
Invited Lecture
Coffee break
Session A-04
Axial Compressors
Session B-04
Modeling of Physical Phenomena (1)
Lunch
Session A-05
Design, Analysis & Performance (Compressors)
Session B-05
Heat Transfer & Blade Cooling - Turbines (2)
Session C-05
Hydraulic Turbomachinery (1)
Coffee break
Session A-06
Unsteady Flows & Blade Row Interactions (Compressors)
Session B-06
Axial, Radial & Wind Turbines
Session C-06
Hydraulic Turbomachinery (2)
ETC Committee Meeting
12.30-14.00
14.00-16.00
16.00-16.30
16.30-18.30
19.00-21.00
rd
Wednesday, March 23
AM
PM
08.00-09.30
09.30-10.00
10.00-12.30
12.30-14.00
14.00-16.00
16.00-16.30
16.30-18.00
19.30
Invited Lecture
Coffee break
Session A-07
Diffusers
Session B-07
Hydraulic Turbomachinery (3)
Lunch
Session A-08
Numerical Modeling (Compressors)
Session B-08
Heat Transfer & Blade Cooling - Turbines (3)
Session C-08
Operational Experience
Coffee break
Session A-09
Radial Compressors (2)
Session B-09
Secondary, Tip & Leakage Flows (Turbines) (2)
Session C-09
Modeling of Physical Phenomena (2)
Conference Gala Dinner
th
Thursday, March 24
AM
08.30-10.30
10.30-11.00
11.00-12.30
PM
12.30-14.00
14.00-16.00
16.00-16.30
16.30-18.00
19.00-21.30
Session A-10
Secondary, Tip & Leakage Flows (Compressors)
Session B-10
Design, Analysis & Performance (Turbines)
Coffee break
Session A-11
Modeling of Physical Phenomena (3)
Session B-11
Flow Control (1)
Lunch
Session A-12
Aero-acoustics & Noise (1)
Session B-12
Design & Optimization Methods (1)
Session C-12
Flow Control (2)
Coffee break
Session A-13
Flow Control (3)
Session B-13
CFD & Steam Turbines
Session C-13
Vibration, Flutter & Aero-elasticity
ETC Committee Meeting
th
Friday, March 25
AM
08.30-10.30
10.30-11.00
11.00-13.00
PM
14.00-18.00
Session A-14
Session B-14
Coffee break
Session A-15
Session B-15
Technical Tours
Design & Optimization Methods (2)
Experimental & Measuring Techniques
Numerical Modeling (Turbines)
Aero-acoustics & Noise (2)
Monday, March 21, 2011
8:30-10:00
Registration
10:00-10:15
Opening Ceremony
10:15-11:15
Invited Lecture 1 - Enhanced Combined Cycle Operating Flexibility & Technology Advancements
Dr Marcus H. Scholz
Commercial Director - Advanced Combined Cycles - GE Energy, Europe
11:30-12:00
12:00-12:30
12:30-13:00
Chairman: Prof. G. Bois (ENSAM, Lille, France) - ETC Chairman
A-01: Radial Compressors (1)
B-01: Secondary, Tip & Leakage Flows
Chairman: Dr. I. Trebinjac (Ecole Centrale Lyon,
(Turbines) (1)
France)
Chairman: Dr E. Göttlich (TU Graz, Austria)
A076
Analysis of a standard turbocharger application
in chemical process engineering
Persigehl, B.; Haag, J.-Ch., Verbaere, V., Hönen,
H., Jeschke, P.; RWTH Aachen, Germany
A063
B086
Aerodynamic instability investigation of a
Optimization of a rotor tip seal with honeycomb
centrifugal compressor exposed to wet gas
land in a gas turbine
Grüner, T., Bakken, L.; Norwegian University of
Wróblewski, W., Dykas, S., Bochon, K., Rulik, S.;
Science and Technology, Trondheim, Norway
Silesian University of Technology, Gliwice, Poland
A068
B201
Design and CFD simulation of a booster
Computation of leaf seal flow using a porous
compressor with volute
medium approach
Leitl, P., Sanz, W., Heitmeir, F.; Graz University of
Bischelmaier, G.; Benoni, A., Willinger, R.; Vienna
Technology, Austria
University of Technology, Austria
13:00 – 14:30 Lunch
14:30-15:00
15:00-15:30
15:30-16:00
A-02: Fans
Chairman: Dr. M. Dumas (SNECMA, Groupe
Safran, France)
A055
Redesign of an electric motor cooling fan for
reduction of fan noise and absorbed power
Vad, J., Horváth, Cs, Lohász, M., Jesch, D., Molnár,
L., Koscsó, G., Nagy, L., Dániel, I., Gulyás, A.;
Budapest Univesity of Technology and Economics,
Hungary
A091
High pressure axial flow fans for power industry
Cyrus, V., Wurst, P.; AHT Energetika Ltd, Prague,
Czech Republic
A285
A computational and experimental analysis of a
ducted fan used in VTOL UAV systems
Akturk, A., Camci, C.; Pennsylvania State
University, USA
B-02: Unsteady Flows & Blade Row Interactions
(Turbines)
Chairman: Prof. P.Zunino (University Genova, Italy)
B105
DNS of separated flows under the influence of
wakes
Gungor, A.G., Simens, M.P., Jiménez, J.;
Polytechnic University Madrid, Spain
B157
Impact of a multi-splitter vane configuration on
the losses in a 1.5 turbine stage
Yasa, T., Lavagnoli, S., Paniagua, G.; von Karman
Institute, Belgium
B249
Swirl jet and crossflow interaction at low
velocity ratios and incompressible flows
Terzis, A.; Ecole Polytechnique de Lausanne,
Switzerland; Kazakos, C.; Aristotle University of
Thessaloniki, Greece; Zachos, P.; Cranfield
University, United Kingdom; Kalfas, A.; Aristotle
University of Thessaloniki; Ott, P.; Ecole
Polytechnique Fédérale de Lausanne
16:00 - 16:30 Coffee break
16:30-17:00
17:00-17:30
17:30-18:00
A-03 : Secondary Flows - Stall & Surge
(Compressors)
Chairman: Prof. C. Hirsch (NUMECA Intl, Belgium)
A277
Large-eddy simulation of a low-speed tipclearance flow
Boudet, J., Caro, J., Jacob, M.; LMFA-Ecole
Centrale de Lyon, France
A206
Experimental investigation of rotating stall in a
high speed multi-stage axial compressor
Courtiade, N., Ottavy, X.; LMFA-Ecole Centrale de
Lyon; Gourdain, N., CERFACS, France
A293
Tip blowing for stability enhancement of a fixed
geometry high speed compressor
Schrapp, H., Gümmer, V.; Rolls-Royce
Deutschland, Germany
B-03: Heat Transfer & Blade Cooling - Turbines
(1)
Chairman: T. Arts (von Karman Institute, Belgium)
B046
Aerothermal analysis of suction side film
cooling in a high-pressure nozzle guide vane
cascade
Montis, M., Ciorciari, R., Niehuis, R.; University of
the German Federal Armed Forces, Munich,
Germany; Salvadori, S., Carnevale, M., Martelli, F.;
University of Florence, Italy
B060
CFD investigation on flow and heat transfer for
an advanced shrouded rotor tip concept
Cottier, F., Lutum, E.; MTU Aero Engines GmbH,
Germany
B061
Thermodynamic, thermal and structure
evaluation of an improved heat-up procedure for
a large power steam turbine
Rzadkowski, R., Lampart, P., Kwapisz, L.,
Szymaniak, M., Drewczynski, M.; Institute of FluidFlow Machinery PAS Gdansk, Poland
8:30-9:30
10:00-10:30
10:30-11:00
11:00-11:30
11:30-12:00
12:00-12:30
Tuesday, March 22, 2011
Invited Lecture 2 - Aerodynamics of the Largest Rotors on Earth
Prof. Dr. G.J.W. van Bussel
Delft University of Technology - Wind Energy Research - The Netherlands
Chairman: Prof. M. Sen - (Istanbul Technical University, Turkey) - Local Organization Chairman
9:30 - 10:00 Coffee break
A-04: Axial Compressors
B-04: Modeling of Physical Phenomena (1)
Chairman: E. Dick (Ghent University, Belgium)
Chairman: E.Tayyar (TEI, Turkey)
B042
A010
Simultaneous influence of turbulence intensity
A unified correction method for Reynolds number,
and scale on a by-pass laminar-turbulent
size and roughness effects on the performance of
transition
compressors
Casey, M.; University of Stuttgart, Germany; Robinson, Wiercinski, Z., Jurkowska, J.; Institute of Fluid-Flow
Machinery PAS Gdansk, Poland
C.J.; PCA Engineers, United Kingdom
A067
B254
Stationary gas turbine intake design and its impact
An assessment of the laminar kinetic energy
on a transonic compressor stage
concept for the prediction of high-lift, lowHilgert, M., Böhle, M.; University of Kaiserslautern;
Reynolds number cascade flows
Cagna, M., Wiedermann, A.; MAN Diesel & Turbo SE,
Pacciani, R., Marconcini, M., Arnone, A.; University
Oberhausen, Germany
of Florence; Bertini, F.; AVIO Group, Italy
B260
A168
Experimental investigations of the aerodynamics of Separated-flow transition process on a lowpressure turbine blade under steady and
an annular compressor cascade at reversed flow
unsteady inflows
conditions
Satta, F., Simoni, D., Ubaldi, M., Zunino, P.;
Chenaux, V., Ecole Polytechnique Fédérale de
University of Genova; Bertini, F.; AVIO Group, Italy
Lausanne, Switzerland; Schönenborn, H.; MTU Aero
Engines GmbH, Germany; Ott, P.; Ecole Polytechnique
Fédérale de Lausanne, Switzerland
A216
B023
Analysis of the effect of blade fouling on the
Analysis of gas turbine rotating cavities by an
perfomance of axial compressor stages by means
one-dimensional model: rotor disk pumped
of CFD simulations
mass flow rate evaluation
with uniform and non-uniform imposed roughness
Da Soghe, R., Facchini, B., Innocenti, L., Micio, M.;
Pinelli, M., Morini, M., Spina, P.R., Venturini, M.,
University of Florence, Italy
Ferrari, C.; University of Ferrara, Italy
A311
B215
Experimental and numerical evaluation of a high
Toward zonal hybrid RANS/LES modelling of
turning transonic compressor stator cascade at
turbulence in rotating flows
flight Idle conditions
de Laage de Meux, B., Audebert, B.; EDF R&D;
Müller, L.; Technical University Braunschweig; Hoeger,
Manceau, R.; University of Poitiers, France
M.; MTU Aero Engines GmbH; Kozulovic, D., Stark, U.;
Technical University Braunschweig, Germany
14:00-14:30
14:30-15:00
15:00-15:30
15:30-16:00
A-05: Design, Analysis & Performance
(Compressors)
Chairman: Dr R. Baier (MTU Aero Engines GmbH,
Germany)
A271
Multi-disciplinary design of a Turboprop engine
front frame anti-icing system
Piskin, A.; TEI Inc., Turkey; Ortiz, J.; ITP S.A., Spain
A274
Numerical and experimental analysis of weld
joint effects for compressor blades
Mesbah, M.; Cenaero; Arts, T.; von Karman
Institute; Simon, J.F.; Techspace Aero; Geuzaine,
P.; Cenaero, Belgium
A136
Post-stall behavior simulations in multistage
compressors. Part I: Steady-state simulations
Du, W., Léonard, O.; University of Liège, Belgium
A327
Post-stall behavior simulations in multistage
compressors. Part II: Transient simulations
Du, W., Léonard, O.; University of Liège, Belgium
12:30 – 14:00 Lunch
B-05: Heat Transfer & Blade Cooling - Turbines
(2)
Chairman: Prof. M. Çakan (Technical University
Istanbul, Turkey)
B069
Effect of turbulence modeling and mesh
refinement on film cooling flow analysis
Dishur, R., Böhle, M.; University of Kaiserslautern;
Wiedermann, A.; MAN Diesel & Turbo SE,
Oberhausen, Germany; Takeishi, K.; Osaka
University, Japan
B079
Aerodynamic investigation of a rotating ribroughened cooling channel by means of timeresolved PIV
Coletti, F., Arts, T.; von Karman Institute, Belgium
B088
Rotational effects on the trailing edge cooling
passage flow field
Armellini, A., Casarsa, L., Mucignat, C.; University
of Udine, Italy
B103
Effects of trailing edge film cooling on the
aerodynamic performance of a nozzle vane
cascade
Barigozzi, G., Ravelli, S.; University of Bergamo,
Dalmine, Italy
16:00 - 16:30 Coffee break
C-05: Hydraulic Turbomachinery (1)
Chairman: Prof. E. Ayder (Technical University
Istanbul, Turkey)
C147
On the use of the SPH-ALE meshless method to
simulate free surface flows in Pelton hydraulic
turbines
Marongiu, J.C., Parkinson, E.; Andritz Hydro,
Switzerland; Leboeuf, F.; LMFA-Ecole Centrale de
Lyon, France
C183
Analysis of a Pelton bucket efficiency
Rossetti, A., Santolin, A., Cavazzini, G., Pavesi, G.,
Ardizzon, G.; University of Padova, Italy
C214
Numerical prediction of cavitation inception in
centrifugal impellers
Marini, A., Salvadori, S., Bernardini, C., Insinna, M.,
Martelli, F.; University of Florence; Nicchio, A., Piva,
A.; WEIR Gabbioneta srl, Milano, Italy
C319
Numerical study of unsteady cavitating flow in a
three-dimensional axial inducer
Campos-Amezcua, R.; Electric Research Institute,
Mexico; Bakir, F.; Arts & Métiers Paris Tech,
France; Mazur-Czetwiec, Z.; Electric Research
Institute, Rey, R.; Arts & Métiers Paris Tech
16:30-17:00
A-06: Unsteady Flows & Blade Row Interactions
(Compressors)
Chairman: Prof. U. Stark (Technical University
Braunschweig, Germany)
A140
Analysis of the impeller-vaned diffuser
interaction in a centrifugal compressor by
means of an aerodynamic fast response probe
Gaetani, P., Osnaghi, C., Dossena, V.; Politecnico
di Milano, Italy
17:00-17:30
A204
Comparison between URANS simulations and
an analytical model for predicting the blade
pressure distribution
de Laborderie, J., Posson, H., Moreau, S.;
University of Sherbrooke, Canada
17:30-18:00
A308
Numerical investigations of wake effects on
downstream cascade characteristics
Sinapius, G., Bollmann, T., Kozulovic, D.; Technical
University Braunschweig, Germany
18:00-18:30
A316
Efficient prediction of nacelle installation effects
at take-off conditions
Purwanto, A., Deconinck, T., Vilmin, S., Lorrain, E.,
Hirsch, C.; NUMECA International, Belgium
B-06: Axial, Radial & Wind Turbines
Chairman: Dr R. Moenig (DLR, Germany)
C-06: Hydraulic Turbomachinery (2)
Chairman: Prof. G. Bois, ENSAM, Lille, France
B028
Numerical and experimental investigations of
supersonic turbine cascade flow
Synac, J., Rudas, B.; Skoda Power; Stastny, M.;
West Bohemia University; Luxa, M., Simurda, D.;
Institute of Thermomechanics AS CR, Safarik, P.;
Czech Technical University in Prague, Czech
Republik
B074
Investigation of one-dimensional turbine design
parameters with relation to cooling parameters
for a high pressure industrial gas turbine stage
Noor, H.; Royal Institute of Technology; Genrup, M.;
Lund University; Fridh, J., Fransson, T.; Royal
Institute of Technology, Sweden
B269
A numerical study of stator vane tip leakage
effects on flow development in a variable
geometry turbocharger turbine
Walkingshaw, J., Spence, S.; Queen's University
Belfast, Northern Ireland; Ehrhard, J.; IHI Charging
Systems International GmbH, Heidelberg, Germany
C207
Flow characteristics in shroud clearance of
centrifugal pumps with non-symmetrical
pressure distribution
Thamsen, P., Bubelach, T.; Technical University
Berlin, Germany
B276
Investigation and optimization of winglets for
hawt rotor blades
Elfarra, M.; Middle East Technical University;
Akmandor, I.; PARS Makina Ltd; Sezer-Uzol, N.;
TOBB University of Economics and Technology,
Turkey
C084
Pressure instabilities in a vaned centrifugal
pump
Cavazzini, G., Pavesi, G., Ardizzon, G.; University
of Padova, Italy
C152
Numerical simulation of the generation of fluiddynamic perturbations in a centrifugal pump
due to rotor-volute-circuit interaction
Blanco, E., Barrio, R.; University of Oviedo;
Fernandez, J.; University of Extremadura;
Parrondo, J.; University of Oviedo; Marcos, A.;
University of Extremadura, Spain
C262
Experimental and numerical investigation of
unforced unsteadiness in a vaneless radial
diffuser
Pavesi, G.; University of Padova, Italy; Dazin, A.;
Arts et Métiers Paris Tech, France; Cavazzini, G.;
University of Padova; Gaignaert, G., Bois, G.; Arts
et Métiers Paris Tech; Ardizzon, G.; University of
Padova
8:30-9:30
10:00-10:30
10:30-11:00
11:00-11:30
11:30-12:00
12:00-12:30
Wednesday, March 23, 2011
Invited Lecture 3 - Turbomachinery Aeroelasticity Analyses - Everyday Business or Exceptional
Challenge
Prof. Damian M. Vogt
Royal Institute of Tecnology - Heat & Power Techynology - Stockholm - Sweden
Chairman: Mr Colin Scrivener (United Kingdom)
9:30 - 10:00 – Coffee break
A-07: Diffusers
B-07: Hydraulic Turbomachinery (3)
Chairman: Dr M. Loetzerich (Alstom Power,
Chairman: Prof. G. Caignaert (ENSAM, Lille)
Switzerland)
A066
B189
Experimental and CFD investigations on the
Miniature single disk viscous pumps
influence of a wall jet flow on the performance
Pavesi, G., Rossetti, A., Ardizzon, G.; University of
of a curved diffuser
Padova, Italy
Finzel, C., Casey, M.; University of Stuttgart,
Germany
B132
A199
A theoretical method to improve the side
The impact of a tip leakage jet on flow
channel pump efficiency
separation in axial gas turbine diffusers
Fleder, A., Müller, T., Böhle, M.; University of
Volkmer, S., Hirschmann, A., Casey, M.; University
Kaiserslautern, Germany
of Stuttgart, Germany; Montgomery, M.; Siemens
AG, Florida, USA
B133
A083
Influence of the diffuser vane setting angle on
Application of endoscopic PIV to the interaction
the flow field in a radial pump
between turbine and exhaust diffuser
Boccazzi, A.; CNR-IENI, Milano; Sala, R.; University
Opilat, V., Seume, J.R.; Leibnitz University
of Pavia; Gaetani, P.; Politecnico di Milano, Italy
Hannover, Germany
B159
A098
Effect of swirl and tip leakage on flow structure,
A method for optimising the blade profile in
Kaplan turbine
losses and pressure recovery in an axial
exhaust diffuser
Banaszek, M., Tesch, K.; Gdansk University of
Technology, Poland
Sadovnichiy, V.N., Kuschel, M., Opilat, V., Seume,
J.R.; Leibniz University Hannover, Germany
A110
B118
Theoretical assessment of the performance of
Evolution of the flow through a turning mid
turbine frame applied between a transonic HPPelton turbines operated with air and steam
Schatz, M., Rettenmeier, P., Casey, M.; University
turbine stage and a counter-rotating LP-turbine
Santner, C., Paradiso, B.; Graz University of
of Stuttgart, Germany
Technology, Austria; Malzacher, F., Hoeger, M.;
MTU Aero Engines GmbH, Germany; Hubinka, J.,
Göttlich, E.; Graz University of Technology, Austria
12:30 – 14h00 Lunch
A-08: Numerical Modeling (Compressors)
Chairman: Prof. J. Backman (Lappeenranta
University of Technology, Finland)
A161
Unsteady flow modelling using deterministic
flux terms
Stollenwerk, S., Kügeler, E.; DLR Cologne,
Germany
B-08: Heat Transfer & Blade Cooling - Turbines
(3)
Chairman: Dr P. Ott (EPFL, Switzerland)
B153
Numerical analysis of the heat transfer in a
trailing edge cooling duct in stationary and
rotating conditions
Andreini, A., Bianchini, C., Facchini, B.; University
of Florence, Italy
14:30-15:00
A236
High-fidelity simulation of the turbulent flow in a
transonic axial compressor
Gomar, A., Gourdain, N., Dufour, G.; CERFACS,
France
B178
Influence of internal parallel and V-shaped ribs
on the discharge coefficient of cylindrical film
cooling holes
Heneka, C., Schulz, A., Bauer, H.-J.; Karlsruhe
Institute of Technology, Germany
15:00-15:30
A289
Detached-eddy simulation of a highly loaded
compressor cascade with laminar separation
bubble
Steger, M., van Rennings, R., Gmelin, C., Thiele, F.;
Technical University Berlin;, Huppertz, A.,
Swoboda, M.; Rolls-Royce Deutschland, Germany
A328
A Quasi-1D model for transonic multistage axial
compressors
Du, W., Léonard, O.; University of Liège, Belgium
B180
Effect of main flow acceleration on trailing edge
film cooling with different internal turbulators
Horbach, T., Schulz, A., Bauer, H.-J.; Karlsruhe
Institute of Technology, Germany
14:00-14:30
15:30-16:00
B235
Comparison of RANS simulation and LES for the
prediction of heat transfer in a highly loaded
turbine guide vane
Gourdain, N., Gicquel, L.; CERFACS; Collado, E.;
TURBOMECA, France
16:00 - 16:30 – Coffee break
C-08: Operational Experience
Chairman: Prof. O. Léonard (University Liège,
Belgium)
C121
Gas turbines compressor fault identification by
utilizing fuzzy logic-based diagnostic systems
Kyriazis, A., Helmis, I., Aretakis, N.; National
Technical University of Athens; Roumeliotis, I.;
Hellenic Naval Academy, Piraeus; Mathioudakis, K.;
National Technical University of Athens, Greece
C278
Numerical investigations on the aerodynamic
influence of eroded leading-edge geometry on
boiler fan performance
Corsini, A., Marchegiani, A., Minotti, S.; SapienzaUniversity of Rome, Italy; Sheard, A.G.; Fläkt
Woods Ltd, United Kingdom
C101
Use of the punched screens to decrease
negative influence of nozzle steam distribution
on efficiency and reliability of steam turbines
Arianov, S.; ENTEK Ltd, Moscow; Zaryankin, A.,
Mitrokhova, O.; Moscow Power Engineering
Institute, Russia
C127
SOFC-GT Hybrid system - turbomachiney
problems
Miller, A., Milewski, J.; Warsaw University of
Technology, Poland
16:30-17:00
17:00-17:30
17:30-18:00
A-09: Radial Compressors (2)
Chairman: H.P. Dickmann (ABB Turbo-Systems
Ltd, Baden, Switzerland)
A049
Analysis of the flow in a transonic centrifugal
compressor stage from choke to surge
Trebinjac, I., LMFA-Ecole Centrale de Lyon; Bulot,
N.; TURBOMECA; Buffaz, N.; LMFA-Ecole Centrale
de Lyon, France
A155
Numerical investigation of a turbocharger
centrifugal compressor: volute influence on the
performance of the compressor
Tartousi, H., Kulisa, P., Leboeuf, F., Ngo-Boum, G.;
LMFA-Ecole Centrale de Lyon; Lefebvre, A.;
RENAULT; Yammine, A,; Ecole Centrale de
Nantes, France
A258
Optimization of the deceleration ratio in
impellers of centrifugal fans
Dick, E., Heirman, P., Annerel, S.; Ghent University,
Belgium
B-09: Secondary, Tip & Leakage Flows
(Turbines) (2)
Chairman: Dr A. Dinc (TEI, Turkey)
B202
Impact of rotor inlet cavity geometry on
shrouded turbine efficiency
Barmpalias, K.G.; ETH Zurich, Switzerland; Kalfas,
A.I.; University of Tessaloniki, Greece; Abhari, R.S.;
ETH Zurich; Shibukawa, N.; Toshiba, Japan
B268
Experimental investigation of the influence of
clearance on leakage flow in a straight through
labyrinth seal
Facchini, B., Innocenti, L., Micio, M.; University of
Florence, Italy
B318
Numerical investigation of high-pressure turbine
blade tip flows - analysis of aerodynamics
Vass, P., Arts, T.; von Karman Institute, Belgium
C-09: Modeling of Physical Phenomena (2)
Chairman: Prof. M. Casey (University Stuttgart,
Germany)
C037
Classical nucleation theory as an adequate
model in predicting related wet steam effects in
LP steam turbines
Petr, V., Kolovratnik, M.; Czech Technical
University in Prague, Czech Republic
C123
Steam condensation experiments in three
homothetic nozzles
Dorey, J.M., Stanciu, M.; EDF R&D; Ren K.F.;
CORIA; Marechal, J.P., Morel, P., David, L.,
Fendler, Y.; EDF R&D, France
C300
A quasi-one-dimensional bubbly cavitating flow
model and comparison with experiments
Delale, C.F.; Isik University; Baskaya, Z.,
Pasinlioglu, S., Sen, M., Ayder, E.; Istanbul
Technical University, Turkey
08:30-09:00
A-10: Secondary, Tip & Leakage Flows
(Compressors)
Chairman: Dr. R. Miller (University Cambridge,
United Kingdom)
A057
Interaction of shrouded stator flow and main
flow and its influence on performances of a
three-stage high pressure compressor
Marty, J., SNECMA & ONERA Toulouse; Aupoix,
B.; ONERA Toulouse, France; Bert, J.; SNECMA,
France
09:00-09:30
A095
Detailed flow analysis of a compressor cascade
with a non-axisymmetric endwall contour
Hergt, A., Klinner, J., Steinert, W., Dorfner, C.,
Nicke, E; DLR Cologne, Germany
09:30-10:00
A177
Analysis of the tip leakage vortex dynamics with
a slotted wing apparatus
Brion, V., Jacquin, L.; ONERA Meudon, France
A242
Extended methodology for analysing the flow
mechanisms induced by casing treatment in
compressor
Legras, G.; SNECMA; Gourdain, N.; CERFACS;
Trebinjac, I.; LMFA-Ecole Centrale de Lyon, France
10:00-10:30
Thursday, March 24, 2011
B-10: Design, Analysis & Performance
(Turbines)
Chairman: Prof. G. Barigozzi (University Bergamo,
Italy)
B169
Wells turbine rotors: a comparison of the
predicted and measured aerodynamic
performance
Starzmann, R., Carolus, T.; University of Siegen,
Germany; Tease, K.; Voith Hydro Wavegen Ltd,
United Kingdom; Arlitt, R.; Voith Hydro Ocean
Current Technologies, Germany
B226
A novel package for turbomachinery
throughflow analysis
Persico, G.; Politecnico di Milano; Rebay, S.;
University of Brescia; Osnaghi, C.; Politecnico di
Milano, Italy
B283
Profile loss model for low-pressure turbines
Cadrecha, D.; ITP S.A.; Vazquez, R.; ITP S.A. Polytechnic University Madrid, Spain
B326
A comparison of high and low speed
aerodynamic performance of a very high lift low
pressure turbine airfoil (T108) at low Reynolds
numbers: Experimental analysis and numerical
prediction
Michálek, J., Ilikan, A., Arts, T.; von Karman
Institute, Belgium
10:30 - 11:00 – Coffee break
A-11: Modeling of Physical Phenomena (3)
Chairman: Mr C. Scrivener (United Kingdom)
11:00-11:30
A193
An integrated particle-tracking impact/adhesion
model for the prediction of fouling in a subsonic
compressor
Borello, D., Arrighetti, C., Corsini, A., Rispoli, F.,
Venturini, P.; Sapienza-University of Rome, Italy
11:30-12:00
A317
Study of sand particle trajectory and erosion
through a propeller
Ghenaiet, A.; Laboratory of Thermal Power
Systems, Algiers, Algeria
12:00-12:30
A107
Nozzle design for an organic vapor wind tunnel
Spinelli, A.; Politecnico di Milano, Italy;
Vandecauter, V.; Delft University of Technology,
The Netherlands; Guardone, A,. Dossena, V.;
Politecnico di Milano, Italy
B-11: Flow Control (1)
Chairman: Prof. C. Sieverding (von Karman
Institute, Belgium)
B131
Optimization of the blowing ratio for a low
pressure turbine cascade with active flow
control
Ludewig, T., Mack, M., Niehuis, R.; University of the
German Federal Armed Forces, Munich; Franke,
M.; MTU Aero Engines GmbH, Germany
B174
Wakes and synthetic jet synchronized forcing
effects on a separating boundary layer under
ultra-high-lift turbine pressure distribution
Simoni, D., Ubaldi, M., Zunino, P.; University of
Genova; Bertini, F,; AVIO Group, Italy
B297
Separation control by air-jet vortex generators
on turbine blades
Szwaba, R., Doerffer, P.; Institute of Fluid-Flow
Machinery PAS Gdansk., Poland
12:30 – 14:00 Lunch
A-12: Aero-acoustics & Noise (1)
Chairman: Gourdain, N. (CERFACS, France)
14:00-14:30
A089
Amplification of the forcing and the tonal noise
in transonic high-pressure turbines
Bianchi, S., Corsini, A.; Sapienza-University of
Rome, Italy; Paniagua, G.; von Karman Institute,
Belgium
14:30-15:00
A209
Assessment of aerodynamics and aeroacosutics tools for open rotors
Boisard, R., Delattre, G., Falissard, F.; ONERA
Chatillon, France
15:00-15:30
A210
Aero-mechanical optimization of a contrarotating open rotor and assessment of its
aerodynamic and acoustic characteristics
Lepot, I., Leborgne, M.; Cenaero, Belgium; Schnell,
R.; DLR Cologne; Yin, J.; DLR Braunschweig,
Germany; Delattre, G., Falissard, F.; ONERA
Meudon, France; Talbotec, J.; SNECMA, France
A211
A linearized method for tone noise generation
and propagation analysis in a multistage contrarotating turbine
Pinelli, L., Poli, F., Marconcini, M., Arnone, A.;
University of Florence; Schipani, C., Spano, E.,
Torzo, D.; AVIO Group, Italy
15:30-16:00
B-12: Design & Optimization Methods (1)
Chairman: Prof. T. Verstraete (von Karman
Institute, Belgium)
B230
Multi-fidelity design optimisation of a transonic
compressor rotor
Brooks, C.J., Forrester, A.I.J., Keane, A.J.;
University of Southampton; Shahpar, S.; RollsRoyce plc, United Kingdom
B029
Aerodynamic design and optimization of
turbomachinery components using a GPU flow
solver
Keskin, A., Haselbach, F.; Rolls-Royce plc, United
Kingdom; Meyer, M., Janke, E.; Rolls-Royce
Deutschland, Germany
B134
Compressor characteristics generation with
CFD and their use for a fast multistage axial
compressor design
Burguburu, S.; ONERA Meudon, France
B188
Robust design of compressor blades in the
presence of manufacturing noise
Bestle, D., Flassig, P.M., Dutta, A,K.; Brandenburg
University of Technology Cottbus, Germany
16:00 - 16:30 – Coffee break
C-12: Flow Control (2)
Chairman: Prof. F. Martelli (University of Florence,
Italy)
C075
Numerical investigation of vortex generators to
reduce cross passage flow phenomena in
compressor stator endwalls
Ortmanns, J.; Rolls-Royce Deutschland; Pixberg,
C.; Technical University Darmstadt; Gümmer, V.;
Rolls-Royce Deutschland, Germany
C116
Active flow control at a 1.5 stage low speed
research compressor with varying rotor tip
clearance
Künzelmann, M., Urban, R., Mailach, R.,
Vogeler,K.; Dresden Technical University,
Germany
C196
Influence of blade aspiration on the flow quality
of an annular axial compressor cascade
Colombo, E.; Ecole Polytechnique Fédérale de
Lausanne, Switzerland; Castillon, L.; ONERA
Meudon, France; Ott, P.; Ecole Polytechnique
Fédérale de Lausanne, Switzerland
C200
Active flow control by means of synthetic jets
on a higly loaded compressor cascade
Zander, V., Hecklau, M., Nitsche, W.; Technical
University Berlin; Huppertz, A., Swoboda, M.;
Rolls-Royce Deutschland, Germany
16:30-17:00
17:00-17:30
17:30-18:00
A-13: Flow Control (3)
Chairman: Prof. R. Niehuis (University of the
German Federal Armed Forces, Munich, Germany)
A252
Discharge coefficient characterization of jet
array impingement holes for an active clearance
control system
Da Soghe, R., Facchini, B., Maiuolo, F., Micio, M.,
Tarchi, L.; University of Florence, Italy
A205
Experimental and numerical results of AFC on a
highly loaded stator cascade
Hecklau, M., Gmelin, C., Nitsche, W., Thiele,
F.,;Technical University Berlin, Germany; Huppertz,
A., Swoboda, M.; Rolls-Royce Deutschland,
Germany
A241
Features of transition mechanism triggered by
synthetic jet in a low pressure turbine
decelerating boundary layer
Bernardini, C., Carnevale, M.; University of
Florence; Manna, M.; University of Naples, Martelli,
F.; University of Florence, Italy
B-13: CFD & Steam Turbines
Chairman: Prof. T. Fransson (Royal Institute of
Technology, Stockholm, Sweden)
B142
Characterization of the flow generated in an
annular test facility
Deslot, C., Colombo, E.; Ecole Polytechnique
Fédérale de Lausanne, Switzerland; Leboeuf, F.;
LMFA-Ecole Centrale de Lyon, France;
Charbonnier, D.; CFS Engineering, Lausanne,
Szitwerland; Ott, P.; Ecole Polytechnique Fédérale
de Lausanne
B035
Unsteady stator-rotor interaction coupled with
exhaust hood effect for last stage steam
turbines
Stanciu, M., Fendler, Y., Dorey, J.-M.; EDT R&D,
France
C-13: Vibration, Flutter & Aero-elasticity
Chairman: Dr A. Beretta (Rolls-Royce plc, United
Kingdom)
C038
A harmonic balance method for aerodynamic
damping prediction in turbomachinery
Sicot, F.; ONERA Chatillon; Dufour, G.; CERFACS;
Dugeai, A.; ONERA Chatillon, France.
B122
Circumferential flow asymmetry in steam
turbines
Szymaniak, M., Swirydczuk, J., Gardzilewicz, A.,
Karcz, M.; Institute of Fluid-Flow Machinery PAS
Gdansk, Poland
C208
Reliability of time-linearized flutter predictions
near the surge line
May, M.; DLR Göttingen; Grüber, B.; MTU Aero
Engines GmbH, Germany
C182
Modal and Aeroelastic Analysis of a Mistuned
Compressor Blisk using an Equivalent Blisk
Model
Nipkau, J., Kühhorn, A., Beirow, B.; Brandenburg
University of Technology Cottbus, Germany
A-14: Design & Optimization Methods (2)
Chairman: Dr I. Lepot (Cenaero, Belgium)
8:30-9:00
9:00-9:30
9:30-10:00
10:00-10:30
A115
Design and off-design optimization of a fan for
automotive applications
Verstraete, T.; von Karman Institute, Belgium;
Roytta, P.; Lappeenranta University, Finland;
Henner, M.; Valeo Engine Cooling, France; Alsalihi,
Z., Brouckaert, J.F.; von Karman Institute, Belgium
A036
Non-stationary Kriging prediction of
turbomachinery time variant responses
Toal, D., Keane, A.; University of Southampton,
United Kingdom
A045
Automated aerodynamic optimization of a return
channel vane of a multistage radial compressor
Reutter, O.; DLR Cologne; Hildebrandt, A., Jakiel,
C.; MAN Diesel & Turbo AG, Oberhausen; Raitor,
T., Voss, C.; DLR Cologne, Germany
A125
Inverse method for axisymmetric Navier-Stokes
computations in turbomachinery aerodesign
Rosa Taddei, S., Larocca, F.; Politecnico di Torino;
Bertini, F.; AVIO Group, Italy
Friday, March 25, 2011
B-14: Experimental & Measuring Techniques
Chairman: Dr R. Obertacke (Siemens AG,
Germany)
B112
Design and operation of a two spool high
pressure test turbine facility
Hubinka, J., Paradiso, B., Santner, C., Pirker, H.P.,
Göttlich. E.; Graz University of Technology, Austria
B072
A phosphorescent thermal history sensor
Rabhiou, A., Feist, J., Kempf, A., Heyes, A.;
Imperial College, London, United Kingdom
B093
New high temperature sensors for turbine
monitoring
Sommer, R., Cavalloni, C., Waser, M.; Kistler
Instrumente AG, Switzerland
B325
High temperature high frequency turbine exit
flow field measurements in a military engine
with a cooled unsteady total pressure probe
Mersinligil, M., Desset, J., Brouckaert, J.F.; von
Karman Institute, Belgium
10:30 - 11:00 – Coffee Break
11:00-11:30
11:30-12:00
12:00-12:30
12:30-13:00
A-15: Numerical Modeling (Turbines)
Chairman: Prof. W. Sanz (TU Graz, Austria)
A059
Aerothermal predictions on a highly loaded
turbine blade including effects of flow
separation
Lutum, E., Cottier, F.; MTU Aero Engines GmbH,
Germany
A167
Numerical modeling of the wake of a lowpressure turbine blade using a linear and a nonlinear eddy viscosity model
Vlahostergios, Z., Sideridis, A., Yakinthos, K.,
Goulas, A.; Aristotle University of Thessaloniki,
Greece
A243
A high-order accurate discontinuous Galerkin
method for turbomachinery applications
Bassi, F., Botti, L., Colombo, A., Franchina, N.;
University of Bergamo; Ghidoni, A., Rebay, S.;
University of Brescia, Italy
A298
Numerical simulations of transonic flow with
film cooling and jet vortex generators
Flaszynski, P., Doerffer, P., Szwaba, R.; Institute of
Fluid-Flow Machinery PAS Gdansk., Poland
B-15: Aero-acoustics & Noise (2)
Chairman: R. Vasquez Diaz, ITP S.A., Spain
B314
Experimental research on LPT-tone noise by induct measurement techniques
Taddei, F., De Lucia, M.; University of Florence;
Schipani, C., Spano, E.; AVIO Group, Italy
B082
Tonal noise prediction of an automotive engine
cooling fan: comparison between analytical
models and acoustic analogy results
Tannoury, E., Demory, B., Henner, M.; Valeo
Thermal Systems, France; Khelladi, S., Bakir, F.;
Arts et Métiers Paris Tech, France
B239
Experimental aero-acoustic characterization of
axial fan fitted with shaped tip end-plates
Bianchi, S., Corsini, A.; Sapienza-University of
Rome, Italy; Sheard, A.G.; Fläkt Woods Ltd, United
Kingdom
B248
U-RANS of a large industrial fan under design
and off-design operations
Borello, D., Corsini, A., Minotti, S., Rispoli, F.;
Sapienza-University of Rome, Italy; Sheard, A.;
Fläkt Woods Ltd, United Kingdom
Author Index
(Author and Session)
Abhari, R. S.
B-09
Brandvik, T.
B-12
Akmandor, I. S.
B-06
Brion, V.
A-10
Akturk, A.
A-02
Brooks, C. J.
B-12
Alsalihi, Z.
A-14
Brouckaert, J. F.
A-14, B-14
Andreini, A.
B-08
Bubelach, T.
C-06
Annerel, S.
A-09
Buffaz, N.
A-09
Ardizzon, G.
B-07, C-05, C-06, C-06
Bulot, N.
A-09
Aretakis, N.
C-08
Burguburu, S.
B-12
Arianov, S. V.
C-08
Arlitt, R.
B-10
Armellini, A.
B-05
Cadrecha, D.
Cagna, M.
B-10
A-04
Arnone, A.
A-12, B-04
Caignaert, G.
C-06
Arrighetti, C.
A-11
Camci, C.
A-02
Arts, T.
A-05, B-05, B-09, B-10
Campos-Amezcua, R. C-05
Audebert, B.
B-04
Carnevale, M.
A-13, B-03
Aupoix, B.
A-10
Caro, J.
A-03
Ayder, E.
C-09
Carolus, T.
B-10
Casarsa, L.
B-05
Bakir, F.
Bakken, L. E.
B-15, C-05
A-01
Casey, M.
A-04, A-07, A-07, B-07
Castillon, L.
C-12
Banaszek, M.
B-07
Cavalloni, C.
B-14
Barigozzi, G.
B-05
Cavazzini, G.
C-05, C-06, C-06
Barmpalias, K. G.
B-09
Charbonnier, D.
B-13
Barrio, R.
C-06
Chenaux, V.
A-04
Baskaya, Z.
C-09
Ciorciari, R.
B-03
Bassi, F.
A-15
Coletti, F.
B-05
Bauer, H. J.
B-08, B-08
Colombo, A.
A-15
Beirow, B.
C-13
Colombo, E.
B-13, C-12
Benoni, A.
B-01
Corsini, A.
A-11, A-12, B-15, B-15, C-08
Bergerat, L.
C-05
Cottier, F.
A-15, B-03
Bernardini, C.
A-13, C-05
Courtiade, N.
A-03
Bert, J.
A-10
Cyrus, V.
A-02
Bertini, F.
A-14, B-04, B-04, B-11
Bestle, D.
B-12
Bianchi, S.
A-12, B-15
Da Soghe, R.
Dániel, I.
A-13, B-04
A-02
Bianchini, C.
B-08
David, L.
C-09
Bischelmaier, G.
B-01
Dazin, A.
C-06
Blanco, E.
C-06
de Laage de Meux, B. B-04
Bocazzi, A.
B-07
de Laborderie, J.
A-06
Bochon, K.
B-01
De Lucia, M.
B-15
Bois, G.
C-06
Deconinck, T.
A-06
Boisard, R.
A-12
Delale, C. F.
C-09
Bollmann, T.
A-06
Delattre, G.
A-12, A-12
Borello, D.
A-11, B-15
Demory, B.
B-15
Botti, L.
A-15
Deslot, C.
B-13
Boudet, J.
A-03
Desset, J.
B-14
Böhle, M.
A-04, B-05, B-07
Dick, E.
A-09
Dishur, R.
B-05
Haag, J.-Ch.
A-01
Doerffer, P.
A-15, B-11
Haselbach, F.
B-12
Dorey, J. M.
B-13, C-09
Hecklau, M.
A-13, C-12
Dorfner, C.
A-10
Heirman, P.
A-09
Dossena, V.
A-06, A-11
Heitmeir, F.
A-01
Drewczy ski, M.
B-03
Helmis, I.
C-08
Du, W.
A-05, A-05, A-08
Heneka, C.
B-08
Dufour, G.
A-08, C-13
Henner, M.
A-14, B-15
Dugeai, A.
C-13
Hergt, A.
A-10
Dutta, A. K.
B-12
Heyes, A.
B-14
Dykas, S.
B-01
Hildebrandt, A.
A-14
Hilgert, M.
A-04
Hirsch, C.
A-06
Hirschmann, A.
A-07
Hoeger, M.
A-04, A-07
Horbach, T.
B-08
Horváth, Cs.
A-02
Hönen, H.
A-01
Hubinka, J.
A-07, B-14
Huppertz, A.
A-08, A-13, C-12
Ehrhard, J.
Elfarra, M.
Facchini, B.
Falissard, F.
B-06
B-06
A-13, B-04, B-08, B-09
A-12, A-12
Feist, J.
B-14
Fendler, Y.
B-13, C-09
Fernández, J.
C-06
Ferrari, C.
A-04
Finzel, C.
A-07
Flassig, P. M.
B-12
Ilikan, A.
Innocenti, L.
B-10
B-04, B-09
Flaszynski, P.
A-15
Insinna, M.
C-05
Fleder, A.
B-07
Forrester, A. I. J.
B-12
Franchina, N.
A-15
Jacob, M.
Jacquin, L.
A-03
A-10
Franke, M.
B-11
Jakiel, C.
A-14
Fransson, T. H.
B-06
Janke, E.
B-12
Fridh, J.
B-06
Jesch, D.
A-02
Jeschke, P.
A-01
Jiménez, J.
B-02
Jurkowska, J.
B-04
Gaetani, P.
Gardzilewicz, A.
A-06, B-07
B-13
Genrup, M.
B-06
Geuzaine, P.
A-05
Ghenaiet, A.
A-11
Kalfas, A.
Karcz, M.
B-02, B-09
B-13
Ghidoni, A.
A-15
Kazakos, C.
B-02
Gicquel, L. Y. M.
B-08
Keane, A. J.
A-14, B230
Gmelin, C.
A-13, A-08
Kempf, A.
B-14
Gomar, A.
A-08
Keskin, A.
B-12
Goulas, A.
A-15
Khelladi, S.
B-15, C-05
Gourdain, N.
A-03, A-08, A-10, B-08
Klinner, J.
A-10
Göttlich, E.
A-07, B-14
Kolovratnik, M.
C-09
Grüber, B.
C-13
Koscsó, G.
A-02
Grüner, T.
A-01
Kožulovi , D.
A-06, A-04
Guardone, A.
A-11
Kulisa, P.
A-09
Gulyás, A.
A-02
Kuschel, M.
A-07
Gungor, A. G.
B-02
Kügeler, E.
A-08
Gümmer, V.
A-03, C-12
Kühhorn, A.
C-13
Künzelmann, M.
C-12
Moreau, S.
A-06
Kwapisz, L
B-03
Morel, P.
C-09
Kyriazis, A.
C-08
Morini, M.
A-04
Mucignat, C.
B-05
Müller, L.
A-04
Müller, T.
B-07
Lampart, P.
Larocca, F.
B-03
A-14
Lavagnoli, S.
B-02
Leboeuf, F.
A-09, B-13, C-05
Leborgne, M.
A-12
Nagy, L.
Ngo-Boum, G.
A-02
A-09
Lefebvre, A.
A-09
Nicchio, A.
C-05
Legras, G.
A-10
Nicke, E.
A-10
Leitl, P.
A-01
Niehuis, R.
B-03, B-11
Léonard, O.
A-05, A-05, A-08
Nipkau, J.
C-13
Lepot, I.
A-12
Nitsche, W.
A-13, C-12
Lohász, M. M.
A-02
Noor, H.
B-06
Lorrain, E.
A-06
Ludewig, T.
B-11
Lutum, E.
A-15, B-03
Opilat, V.
Ortiz, J. R.
A-07, A-07
A-05
Luxa, M.
B-06
Ortmanns, J.
C-12
Osnaghi, C.
A-06, B-10
Ott, P.
A-04, B-02, B-13, C-12
Ottavy, X.
A-03
Mack, M.
Mailach, R.
B-11
C-12
Maiuolo, F.
A-13
Malzacher, F.
A-07
Manceau, R.
B-04
Pacciani, R.
Paniagua, G.
B-04
A-12, B-02
Manna, M.
A-13
Paradiso, B.
A-07, B-14
Marchegiani, A.
C-08
Parkinson, E.
C-05
Marconcini, M.
A-12, B-04
Parrondo, J.
C-06
Marcos, A.
C-06
Pasinlioglu, S.
C-09
Marechal, J. P.
C-09
Pavesi, G.
B-07, C-05, C-06, C-06
Marini, A.
C-05
Persico, G.
B-10
Marongiu, J. C.
C-05
Persigehl, B.
A-01
Martelli, F.
A-13, B-03, C-05
Petr, V.
C-09
Marty, J.
A-10
Pinelli, L.
A-12
Mathioudakis, K.
C-08
Pinelli, M.
A-04
May, M.
C-13
Pirker, H. P.
B-14
Mazur-Czerwiec, Z.
C-05
Piskin, A.
A-05
Mersinligil, M.
B-14
Piva, A.
C-05
Mesbah, M.
A-05
Pixberg, C.
C-12
Meyer, M.
B-12
Poli, F.
A-12
Michálek, J.
B-10
Posson, H.
A-06
Micio, M.
A-13, B-04, B-09
Pullan, G.
B-12
Milewski, J.
C-08
Purwanto, A.
A-06
Miller, A.
C-08
Minotti, S.
B-15, C-08
Mitrokhova, O.
C-08
Rabhiou, A.
Raitor, T.
B-14
A-14
Molnár, L.
A-02
Ravelli, S.
B-05
Montgomery, M.
A-07
Rebay, S.
A-15, B-10
Montis, M.
B-03
Ren, K.F.
C-09
Rettenmeier, P.
B-07
Steger, M.
A-08
Reutter, O.
A-14
Steinert, W.
A-10
Rey, R.
C-05
Stollenwerk, S.
A-08
Rispoli, F.
A-11, B-15
Swirydczuk, J.
B-13
Robinson, C. J.
A-04
Swoboda, M.
A-13, A-15, C-12
Rosa Taddei, S.
A-14
Synac, J.
B-06
Rossetti, A.
B-07, C-05
Szwaba, R.
A-15, B-11
Roumeliotis, I.
C-08
Szymaniak, M.
B-03, B-13
Roytta, P.
A-14
Rudas, B.
B-06
Rulik, S.
B-01
Taddei, F.
Takeishi, K.
B-15
B-05
Rzadkowski, R.
B-03
Talbotec, J.
A-12
Tannoury, E.
B-15
Sadovnichiy, V. N.
Safarik, P.
A-07
B-06
Tarchi, L.
A-13
Tartousi, H.
A-09
Sala, R.
B-07
Tease, K.
B-10
Salvadori, S.
B-03, C-05
Terzis, A.
B-02
Santner, C.
A-07, B-14
Tesch, K.
B-07
Santolin, A.
C-05
Thamsen, P. U.
C-06
Sanz, W.
A-01
Thiele, F.
A-08, A-13
Satta, F.
B-04
Toal, D. J. J.
A-14
Schatz, M.
B-07
Torzo, D.
A-12
Schipani, C.
A-12, B-15
Trébinjac, I.
A-09, A-10
Schnell, R.
A-12
Schönenborn, H.
A-04
Schrapp, H.
A-03
Ubaldi, M.
Urban, R.
B-04, B-11
C-12
Schulz, A.
B-08, B-08
Sen, M.
C-09
Seume, J. R.
A-07, A-07
Vad, J.
van Rennings, R.
A-02
A-08
Sezer-Uzol, N.
B-06
Vandecauter, V.
A-11
Shahpar, S.
B-12
Vass, P.
B-09
Sheard, A. G.
B-15, B-15, C-08
Vázquez, R.
B-10
Shibukawa, N.
B-09
Venturini, M.
A-04
Sicot, F.
C-13
Venturini, P.
A-11
Sideridis, A.
A-15
Verbaere, V.
A-01
Simens, M. P.
B-02
Verstraete, T.
A-14
Simon, J. F.
A-05
Vilmin, S.
A-06
Simoni, D.
B-04, B-11
Vlahostergios, Z.
A-15
Simurda, D.
B-06
Vogeler, K.
C-12
Sinapius, G.
A-06
Volkmer, S.
A-07
Sommer, R.
B-14
Voss, C.
A-14
Spano, E.
A-12, B-15
Spence, S. W. T.
B-06
Spina, P. R.
A-04
Spinelli, A.
A-11
Walkingshaw, J. R.
Waser, M.
B-06
B-14
Stanciu, M.
B-13, C-09
Wiedermann, A.
A-04, B-05
Stark, U.
A-04
Wiercinski, Z.
B-04
Starzmann, R.
B-10
Willinger, R.
B-01
Stastny, M.
B-06
Wróblewski, W.
B-01
Wurst, P.
A-02
Yakinthos, K.
A-15
Yammine, A.
A-09
Yasa, T.
B-02
Yin, J.
A-12
Zachos, P.
Zander, V.
B-02
C-12
Zaryankin, A. E.
C-08
Zunino, P.
B-04, B-11
Map of Conference Venue
Plan of Conference Venue
Entrance Floor
Mezzanine Floor
Upper Floor
Map of Welcome Reception and Gala Dinner
Gala Dinner
Welcome Reception
Conference Map