FEB ZODIAC UPDATE_GBR.qxd

PERFORMANCE PRODUCTS FOR HARLEY-DAVIDSON ®
NEW
Dealer News
I S S U E D E C E M B E R 2007
with a five stud bolt pattern and increased
fin area for maximum cooling abilities. The
head has the fuel injector mounted directly
in it for even more efficient combustion. The
non-structural rocker cover allows Custom
Bike builders to adapt the design to their
wishes. There are too many innovations and
unique designs built into the X-Wedge
engine to list here. The X-Wedge is not a
replacement engine and it does not fit in a
Harley-Davidson frame. It requires a special
frame with the appropriate engine mounts,
but since the X-Wedge is intended for
custom builds this will not be an issue.
Frames specifically designed to take this
engine will be available shortly. The
X-Wedge crankcase bolts up to most
standard and aftermarket Harley style
aluminum primaries, making it compatible
with a large number of primary drives,
clutches and transmissions. Engine comes
complete with a 2 1/16” single bore throttle
body, S&S VFI Fuel Injection module, closed
loop fuel management and knock sensing
ignition control.
S&S X-WEDGE ENGINES
The all new S&S X-Wedge (pronounced as “Ex-Wedge”)
engine is developed with upcoming, tightening emission
standards in mind. This next generation V-Twin is a
departure from S&S’ traditional engine design and a
step toward the future of air-cooled, pushrod operated
V-Twins. The engine is a 56-degree, closed-loop fuel
injected, three cams, overhead valve V-Twin designed
to deliver the performance expected of an S&S engine,
but still comply with EPA laws. One key engineering
feature is the versatility of the design to create a range
of engine sizes. The 117 CI (1.918 cc) 56 degree
V-Twin utilizes three serpentine belt-driven, large basecircle cams; two exhaust cams and a common intake
cam to achieve almost straight pushrod angles that
combine with automotive-style rockers and roller
tappets to create an incredibly quiet valve train.
Induction on the X-Wedge is done with the new S&S
single bore throttle body pumping fuel and air into a
wedge shaped combustion chamber contained in a head
S&S X117
750834
750835
750836
X-Wedge engines
Silver paint finish
Black paint finish
Polished finish
Engine specs
56.25 degree cylinder angle
4.125” bore X 4.375” stroke
117CI (1.917 CC) displacement
9.75 : 1 compression
Tests on the S&S SuperFlow Dyno showed 97.5 BHP
and 110.4 ft/lbs. torque.
PERFORMANCE PRODUCTS FOR HARLEY-DAVIDSON
®
33-001
A
B
E
C
E
D
F
THE ULTIMATE STAINLESS STEEL BRAIDED BRAKE
AND CLUTCH LINES WITH ALL CHROME OR
STAINLESS STEEL FITTINGS
With these top quality parts you can assemble any
hydraulic brake or clutch line. The Stainless Steel
covered PTFE hose is extremely flexible, strongly resists
expansion under high pressure and temperature.
Provides consistent brake pressure giving firmer and
more efficient operation without that spongy feeling. It
has over 840 Bar (12.000 psi) burst pressure. Normal
operating pressure of a brake systems is “only” 210
Bar. Brake line is available in three qualities; braided
stainless steel, braided steel covered with clear tubing
as well a “Carbon Look” covered quality. Fittings are reusable, extremely easy to work with
A
and available in chrome, Stainless
B
Steel or black colored Stainless
Steel.
C
A.
Braided
St. steel
Shop pack, 5 mtr. 232119
Shop pack, 10 mtr. 232118
Shop pack, 20 mtr. 232117
B.
Carbon-look
Covered
237672
237673
237674
C.
Clear
Covered
237675
237676
237677
Note:
- Most USA and British made master cylinders and
calipers have 3/8 UNF or 7/16 UNF thread
- 2004 to present Sportster models have M10 x
1.25 on calipers and single disc master
cylinders, and M12 x 1.50 on dual disc master
cylinders
- Most European (metric) master cylinders and
calipers have M10 x 1.00 thread
- Japanese master cylinders and calipers can
have M10 x 1.00 or M10 x 1.25 thread
33-002
D
G
D
H
I
TO MAKE SURE YOU ORDER THE CORRECT PARTS
A L W AY S C H E C K T H R E A D S I Z E B E F O R E
ORDERING!!!
A. Adaptors
Chrome Stainless Stainless
Black
237382 237517 232123 M10 x 1.00 convex to 3/8
UNF convex
237383 237518 232170 M10 x 1.25 concave to
3/8 UNF convex
N/A
741756 741757 M10 x 1.25 convex to 3/8
UNF convex NEW
237384 237519 N/A
1/8 NPTF concave to UNF
convex
237385 237520 N/A
3/8 UNF concave to UNF
convex
237388 N/A
N/A
7/16 UNF concave to
UNF convex
N/A
232187 N/A
M12 x 1.50 concave to
UNF convex NEW
B. Banjo eyes
Chrome Stainless Stainless
Black
237386 237521 N/A
3/8” (10 mm) hole to UNF
convex
237387 237522 N/A
7/16” (11 mm) to UNF
convex
C. Straight brake line banjos
Chrome Stainless Stainless
Black
741077 741078 N/A
3/8” (10 mm), short
741761 741762 N/A
3/8” (10 mm), long NEW
741079 741085 N/A
7/16” (11 mm), short
232134 237524 N/A
7/16” (11 mm), long
232114 232171 N/A
12 mm NEW
PERFORMANCE PRODUCTS FOR HARLEY-DAVIDSON
®
Angled brake line banjos
Chrome Stainless Stainless
Black
232133 237523 N/A
232138 232144 N/A
232115 232175 N/A
232137 237528 N/A
741086 741087 N/A
741088 741089 N/A
NEW
3/8” (10 mm), 20 Degrees
7/16” (11 mm), 20 Degrees
12 mm, 20 Degrees NEW
3/8” (10 mm), 70 degrees
3/8” (10 mm), 90 degrees
7/16” (11 mm), 90 degrees
E. Brake line nipples
Chrome Stainless Stainless
Black
237380 237515 N/A
Straight UNF
237381 237516 N/A
90 degree UNF
F. Banjo bolts
Chrome Stainless Stainless
232140
741094
232141
741096
232122
232142
741090
232156
741092
237525
741095
237526
741097
232182
237527
741091
237533
741093
N/A
N/A
237442
N/A
237574
237404
N/A
237405
N/A
Black
M10 x 1.00
M10 x 1.00, long
M10 x 1.25
M10 x 1.25, long
M12 x 1.50 NEW
3/8 UNF
3/8 UNF, long
7/16 UNF
7/16 UNF, long
G. Banjo bolt seal washers
232150
3/8” (10 mm) copper, 10 pack
237532
3/8” (10 mm) aluminum, 10 pack
348014
3/8” (10 mm) aluminum with Viton insert,
10 pack
232143
7/16” (11 mm) copper, 10 pack
237531
7/16” (11 mm) aluminum, 10 pack
CHROME
BILLET
POINTED OR
DOMED
“ESSENTIAL”
GAS CAPS
These gas
caps have a
unique ratchet
action
to
prevent over
tightening and
come
complete with
a paint protector and locking tool with key ring. The right
hand side cap is fitted with an EPA check valve, which
can be removed for service or other applications. Made
from solid billet aluminum with a show chrome finish.
“Essential” gas caps fit all models with screw-in style
gas caps 1982 to present, as well as all Zodiac gas
tanks with screw type filler neck. Available as sets of
left and right, as well as single gas caps for use on
single-cap gas tanks, such as used on Sportster
models. Pointed or Domed style.
012156
Pointed gas cap set with left and right side
caps, paint protectors and locking tool
Pointed gas cap with paint protector and
locking tool, vented
012155
012158
Domed gas cap set with left and right side
caps, paint protectors and locking tool
Domed gas cap with paint protector and
locking tool, vented
012157
DOUBLE BANJO BOLT
Extra long banjo bolt
with 3/8” UNF or
M10x1.25 thread.
Designed to mount two
3/8” (10 mm) banjo’s to
the same hole.
Available in Chrome,
polished Stainless Steel
and black colored
Stainless Steel
H. Replacement copper olive sleeves
232151
10 pack
I. Replacement socket nut, fits all nipples and
banjos
Chrome
Stainless
232139
232145
Sold each
3/8 UNF
237583
237582
237403
PERFORMANCE PRODUCTS FOR HARLEY-DAVIDSON
M10x1.25
741760
Chrome
741758
Stainless Steel
741759
Black Stainless Steel
®
NEW
33-003
Fits Dyna models 1999 to present and Softail
models 2000 to present
702200
Black NEW
702201
Red NEW
702202
Black NEW
Fits Evolution Sportster models 2004 to present
and carburated FLH/FLT series models 1999 to
present
702203
Black NEW
702204
Red NEW
702205
Blue NEW
SUMAX SPARK PLUG WIRE SETS
This “409” Pro Racing Wire is constructed for
professional race applications, so it will be perfect for
your High Performance engine set-up where maximum
spark is preferred.
Exceptional features are:
• Sleeving is bonded directly over 8 mm Pro Wire
• Dielectic strength of 100,000 Volts plus
• 3 Layers of silicone
• Tightly woven, heat treated fiberglass skin
• 0.409” diameter (10.4 mm)
• Spiral wound
• Taylor “Pro Boot” bonded to the wire.
Depending on the application these plug wire kits are
available in Black, Red and/or Blue racing colors. Also
available in two equal lengths of 18” with 135 degree
plug boots for custom applications such as dual
plugging.
Fits all Ironhead Sportster, FX and Dyna Glide
models thru 1998 with back sidemount coil
238512
Red
238513
Blue
Fits all FXR models and models with coil
between the cylinders
238514
Red
238515
Blue
Fits Fuel Injected FLH/FLT series models 1999 to
present
702206
Black NEW
702207
Red NEW
702208
Blue NEW
Custom 18” leads with 135 degree plug boots
(pair)
238518
Red
MORRIS MAGNETO FOR
FLATHEAD, 1952 THRU
1956 K & KH & 1957
THRU 1970 XL MODELS
This firm mounting
magneto prevents for
base leaks. Can be uses
with or without battery.
Features auto advance
as well as manual retard for easier starting, but has no
provision for a base-driven mechanical tacho. It is an
easy to install 2-piece design and you don’t have to buy
any extra mounting hardware.
232304
Fits 1937 thru 1973 45CI, 74CI and 80CI
Flatheads, 1952 thru 1956 K & KH, and
1957 thru 1970 XL models
Fits all Evolution Sportster thru 2003 (except XL
1200 S), and FLT and FLHT models thru 1998
238516
Red
238517
Blue
33-004
PERFORMANCE PRODUCTS FOR HARLEY-DAVIDSON
®
Fits Fuel injected FLH and FLT series models
1999 to present
Features two 21” (53 cm) leads
702211
Black NEW
NEW
SUMAX CUSTOM BRAIDED PLUG WIRE KITS
These braided plug wire kits feature a colored wire
under a silver braid. Each kit comes with a grounding
kit to ground the braid to the motorcycle for arcing
purposes. Dependent on the application there are
various colors to choose from. They all have a Spiro
Pro core for use with points or electronic ignitions.
Available with 90° plug boots and either straight coil
boots to fit back side mount coils in front of the oil tanks
like on Softails and Dyna Glides, or 90° coil boots for
FXR models.
Fits 1965 thru 1985 4-speed Big Twin, 1965
thru 1985 Sportster, 1984 thru 1999 Softail and
1991 thru 1999 Dyna
Features a 16” (41 cm) and a 7” (18 cm) lead, 90
degree spark plug boots, and straight coil boots.
238576
Black
238577
Red
Fits all FXR models and other models with the
coils mounted between the cylinders
Features two 12” (30 cm) leads, 90 degree spark plug
boots and 90 degree coil boots.
238579
Black
238580
Red
238581
Blue
Fits Dyna models 1999 to present and Softail
models 2000 to present
Features one 18” (46 cm) lead and one 7” (18 cm) lead.
702209
Black NEW
Fits carburated FLH and FLT series models
1999 to present and Sportster models 2004 to
present (except XL1200 S)
702210
Black NEW
BULLSEYE STAINLESS STEEL OIL TANKS
These handcrafted “DaVincie Motors” oil tanks are one
of the hottest items in the custom scene today. Tanks
are made from stainless steel and use a 10 mm (more
than 3/8”) thick safety glass
on either one or both
sided. Total length is
10” (25 cm), with a
diameter of 5 1/2”
(14 cm) gives it a
capacity of 2.5 ltr.
The tank mounts with
three 5/16” - 18 rubber
blocks, such as our ZPN
358211 or similar. Uses 1/8” NPT type fittings.
Available in polished, satin or black finish. Come in an
exclusive DaVincie combat bag.
Single glass Bullseye oil tanks
744282
Polished
744283
Satined
744284
Black
Dual glass
744285
744286
744287
PERFORMANCE PRODUCTS FOR HARLEY-DAVIDSON
®
Bullseye oil tanks
Polished
Satined
Black
33-005
NEW
FEHLING DRAGBAR WITH INTEGRATED TURN
SIGNALS
CHROME THRU-THE-HEAD BREATHER KITS
These chrome cylinder head breather tubes are a must
when installing an aftermarket air cleaner on bikes with
the so called “Thru-the-head” breather system. Simple
bolt-on construction comes complete with required
hardware. Big Twin kits include 2 sets of breather bolts
to allow fitment on 1993 thru 1999 Evolution, 1999 to
present Twin Cam, S&S V-style as well as S&S T-style
engines. Sportster kits fit 1991 to present XL models.
A breather filter is not included, but strongly
recommended when you do not route the breather hose
to the air cleaner
120166
120167
Big Twin “Thru-the-Head” breather kit
Sportster “Thru-the-Head” breather kit¶
SINGLE-FIRE SUPER COIL
Accel’s new Single Fire 3 Ohm Super Coil is just as
powerful as the original Super Coil. This is the perfect
replacement or upgrade and will bolt right on with no
modifications. Fits all Harley’s with electronic Single Fire
ignition system, except Twin-Cams. Available in yellow,
black and chrome.
The solutions for those who want a clean front end and
turn signals are mandatory. Fehling has integrated the
turn signals into the handlebar. Handlebar and turn
signals are TÜV approved and are dimpled for use with
1982 to present handlebar controls. The narrow version
is available in black or chrome.
Width
A. 731620 Chrome 39”
B. 731619 Chrome 38”
C. 731625 Black
38”
731638
731674
Replacement lens
Replacement bulb
33-006
Yellow
Black NEW
Chrome NEW
Pull
back
2”
4”
4”
Light
Distance
13 1/8”
10 1/2”
10 1/2”
NEW
NEW
DYNA’S TCC
IGNITION COIL FOR
TWIN-CAM MODELS
NEW
Dyna’s TCC ignition coil
is specifically designed
for Twin-Cam models.
The Dyna coil has a
primary resistance of
only 0.5 Ohms, which
is even less as the stock coil. This coil is perfect for
stock or any aftermarket Twin- Cam ignition system. Fits
carburetor equipped Twin-Cam Softail models 2000 to
present, carburetor equipped FLH/FLT models 1999 to
present, Fuel Injected FLH/FLT models 1999 thru 2001,
carburetor equipped Dyna Glide Twin- Cam models 1999
to present and Sportster models 2004 thru 2006.
232578
731523
731444
731445
Center
width
10”
17”
17”
Dyna DC6-6 ignition coil
Note: This coil can not be used with points or any other
conventional electronic ignitions.
PERFORMANCE PRODUCTS FOR HARLEY-DAVIDSON
®
Catalog
Correction
NEW
A
MORRIS MAGNETO FOR ALTERNATOR/GENERATOR
STYLE ENGINES
B
C
D
E
FEHLING TÜV APPROVED HANDLEBARS
High quality handlebars from the German manufacturer
Fehling, designed for style and comfort to put your bike
above the crowd. The use of a computer-operated
bending machine ensures the exact symmetry of each
handlebar. All Fehling handlebars are TÜV approved with
1” diameter. Handlebars are available in various models
in either high quality chrome or black powder coated:
without dimples for up to 1982 Harley models, and with
dimples for 1982 to present Harley models. Some
models are available “slotted”, to allow you to guide all
wiring through handlebar and risers. Please note that
this requires large diameter risers, and hollow studs.
There is a wide variety of styles available, but
remember, with any Fehling handlebar you are ready to
race, chase, cruise and show.
End Width
rise
A.731629 Dirt Tracker
4”
36”
w/o dimples 10cm 91cm
731630 Dirt Tracker
4”
36”
with dimples 10cm 91cm
B.731631 Electra Glide 6 1/2” 35”
with dimples 16cm 89cm
C.731632 Buckhorn Low 2 1/2” 40”
with dimples 6cm 100cm
D.731633 Buckhorn High 5”
41”
with dimples 12cm 104cm
E.731634 Superbar
5”
39”
with dimples 12cm 99cm
Center Pull
width back
10” 4 1/2”
25cm 11cm
10” 4 1/2”
25cm 11cm
14 1/2” 11 1/2”
37cm 29cm
11” 11”
28cm 28cm
8”
14”
20cm 35cm
9”
8 1/2”
23cm 22cm
This generator-port driven magneto is great for
Alternator/Generator style Big Twin engines. Can also
be used on 1936 thru 1969 generator style Big twin
engines that are used for racing or other applications
that do not use a charging system. Features fully
automatic impulse coupling for incredible starting, no
matter if it is kick start or electric start. This magneto
is easy to bolt on and can be mounted in various
positions. Dependent on the used crankcase and
chosen position it might be necessary to remove some
case material.
231856
Morris generator port driven magneto
NEW
K&N HI-FLOW AIR FILTER CONVERSION KIT FOR
TWIN CAM
K&N’s claims you get more horsepower from your Twin
Cam engine when this extra large “RK series” filter is
fitted. Built around the legendary K&N High-Flow Air
Filter, the new RK Series assembly includes an
innovative powder coated billet aluminum back plate
that eliminates external breathers and features a builtin, dyno-tuned velocity stack. The result is a significant
airflow increase to the engine without sacrificing
filtration. This RK Series assembly retains a factory
appearance by utilizing the stock air cleaner cover, yet
boasts superior filtration and performance with a K&N
stamped laser etched beauty ring. Fits all Twin Cam
models 1999 to present.
733800
PERFORMANCE PRODUCTS FOR HARLEY-DAVIDSON
K&N “RK” series air cleaner kit
®
33-007
NEW
750837
750839
750842
750840
Fits 1998 thru 2006 Dyna models
Fits 2007 to present Dyna models
Fits 1995 thru 2006 FLH and FLT series
models
Optional and replacement parts
750846
Replacement Retaining ring, dB Killer
750847
Inner muffler baffle (dB Killer)
750838
758839
750840
750841
S&S TÜV APPROVED AND EC CERTIFIED MUFFLERS
®
In response to increased demand for S&S products in
the European market, S&S now offers these EC
compliant replacement slip-on mufflers. These mufflers
have been certified by TÜV to meet EC standards and
may legally be used to replace stock mufflers for the
applications listed in all countries in the European Union.
S&S EC compliant mufflers can be used to replace the
stock exhaust on emissions controlled vehicles in all
countries in Europe. They maintain stock noise and
horsepower levels. Sturdy steel construction, and show
chrome finish make these the ideal replacement for a
damaged stock exhaust. Mufflers are sold in pairs.
750841
750837
750844
750845
750837
750838
750843
33-008
Fits 1986 thru 2003 Sportster models
Fits 2004 thru 2006 Sportster models
Fits 2001 thru 2007 VRSCA V-Rod
models, Slash-Cut
Fits 2005 to present VRSCR Street-Rod
models
Fits 2000 thru 2006 FXST Softail models,
except FXSTD “Deuce”
Fits 2000 thru 2006 FXST “Deuce” and
2000 thru 2006 FLSTF Fat Boy
Fits 2007 Softail models
ECO-LINE CHROME STARTER MOTORS
Top quality starter motors, completely fabricated from
new components that are really designed to do the job.
The 1.6 kW starter motor, the basic version for Big
Twins, is already slightly stronger than the stock 1.4 kW.
For those with a Big Inch High Compression motor we
also have the 1.8 kW and 2.0 kW versions available.
Eco-Line starter motors are available for 1989 thru
1999 Evolution Big Twin and 1999 thru 2006 Twin Cam
models, 2006 Dyna and all 2007 to present Twin Cam
models.
For Evolution Big Twin and Twin Cam
740200
1.4 kW, fits 1990 thru 2004 models
740201
1.4 kW, fits 1989 thru 1993
740202
1.6 kW, fits 1994 thru 2006, except 2006
Dyna
740203
1.8 kW, fits 1989 thru 1993
740204
1.8 kW, 1994 thru 2006, except 2006
Dyna
740205
2.0 kW, fits 1989 thru 1993
740206
2.0 kW, 1994 thru 2006, except 2006
Dyna
740210
1.6 kW, fits 2006 Dyna and all 2007 to
present Twin Cam models NEW
PERFORMANCE PRODUCTS FOR HARLEY-DAVIDSON
®
NEW
NEW
SOFTAIL STYLE FRAME KIT FOR X-WEDGE ENGINES
CHROME “DETONATOR” MIRRORS WITH BUILT-IN
LED LIGHTS
These teardrop style chrome plated beauties feature
built-in LED lights that can be used as running lights or
turn signals. Mirrors come pre-wired and are sold in sets
of left and right.
270607
NEW
Detonator mirror set with LED lights
This frame kit is designed to get you on the road fast.
Other than the X-Wedge specific motor mounts, this
frame accepts most stock or aftermarket chassis,
brake and suspension parts designed to fit Twin Cam
Softail models. One exception to this is that the frame
is applicable with 1984 thru 1999 style forward
controls. The frames are built to accommodate a
200mm rear tire with a 1 1/8” final belt drive.
Transmission mount is 3/4” offset. Primary must be
installed with a (not included) 3/4” primary spacer ring.
Frame has a 2” diameter backbone with 2” stretch and
30 degree neck rake. Comes complete with stock and
custom style weld-on gas tank mounts, 4 quart (3.7 ltr)
wrap-round oil tank with integrated battery box, Softail
style swingarm, 1” rear wheel axle with axle plates and
hardware. Battery box measures 4 3/4” wide, 7” long
and 6” high.
750874
742350
S&S Softail style frame kit for X-Wedge
3/4” primary spacer ring
SPEEDLINE II GRIP SETS
Sleek looking grip sets that fit all models 1973 to
present with single or dual cable operated throttle
(except models with handlebar air reservoir). These
grips have a one-piece rubber insert that protrudes
through the chrome plated housing to absorb vibrations.
Available with 6 rail “wide band” rubber inserts or 8 rail
“narrow band” inserts.
351215
351216
With 6 railed wide band inserts
With 8 railed narrow band inserts
PERFORMANCE PRODUCTS FOR HARLEY-DAVIDSON
®
33-009
C
A
E
D
F
B
G
H
I
J
K
GOODRIDGE TÜV
APPROVED
BRAIDED BRAKE
& CLUTCH LINES
These uniquely
designed, top
quality parts
enable you to make any OEM replacement or custom
length hydraulic brake line up to 65” (137 cm) in less
than 5 minutes. Brake lines are available in braided
stainless steel, clear coated braided stainless steel, and
Carbon Look covered. The variety of fittings and pipes
enable you to hook up any caliper to any master
cylinder. Just check the length of the brake line that is
needed, and which fittings are needed at both ends and
just assemble the parts into a complete brake line. The
superb quality of these parts has already been proven.
All lines come with TÜV approval. The all chrome fittings
are available from your Zodiac dealer only.
TÜV Approved brake lines
Braided
Length:
Steel
9” (23 cm)
237546
12” (30 cm)
237547
15” (38 cm)
237548
17” (43 cm)
237549
19” (48 cm)
237550
21” (53 cm)
237551
23” (58 cm)
237552
25” (63 cm)
237553
26” (66 cm)
237554
28” (71 cm)
237555
30” (76 cm)
237556
32” (81 cm)
237557
34” (86 cm)
237558
38” (96 cm)
237559
33-010
Clear
Coated
711483
711484
711485
711486
711487
711488
711489
711490
711491
711492
711493
711494
711495
711496
Carbon
Look
237654
237655
237656
237657
237658
237659
237660
237661
237662
237663
237664
237665
237666
237667
Length:
42” (106
47” (119
52” (132
54” (137
K
cm)
cm)
cm)
cm)
K
Braided
Steel
237560
237561
237562
237563
Clear
Coated
711497
711498
711499
711551
Carbon
Look
237668
237669
237670
237671
Chrome plated banjo fittings and pipes
All banjo fittings have an AN-3 (3/8-24) threaded end to
attach to the above listed hoses. Pipes have AN-3
connector on one side, the other side has 3/8 UNF
inverted flare to attach to OEM brake line Tees as well
as some OEM Calipers and master cylinders.
Banjo fittings
A. Chrome Stainless Stainless
Black
237535 741674 741675
237534 741672
741673
232120 232178
741061
3/8” (10 mm)
straight NEW
7/16” (11 mm)
straight NEW
12 mm straight
NEW
B. Chrome Stainless Stainless
Black
237537 741678 741679
237536 741676
741677
3/8” (10 mm) 35
degrees NEW
7/16” (11 mm)
35
degrees
NEW
232121 232179
741063
N/A
741751
PERFORMANCE PRODUCTS FOR HARLEY-DAVIDSON
741750
®
12 mm, 20
degrees NEW
3/8” (10 mm) 45
degrees NEW
C. Chrome Stainless Stainless
Black
237539 741754 741755
237538 741752
741753
3/8” (10 mm) 90
degrees NEW
7/16” (11 mm)
90
degrees
INTERNATIONAL HEAD OFFICE
THE NETHERLANDS
Zodiac International B.V.
Tel: +31 (0) 297 288 621
Fax: +31 (0) 297 288 226
sales@zodiac.nl
www.zodiac.nl
NEW
Chrome
D. 237541
E. 237542
F. 237540
G. 237544
H. 237545
I. 237543
Connector pipe
35 degrees
45 degrees
60 degrees
90 degrees, short
90 degrees, long
90 and 45 degrees
J. Adaptors
Chrome
Stainless Stainless
Black
237382
237517 232123
237383
237518
232170
N/A
741756
741757
FRANCE
Zodiac France
Tel.: 01 48 85 32 00
Fax: 01 48 85 66 43
zodiac-france@zodiac.nl
GERMANY
Zodiac Deutschland
Tel.: 021 37 78 740
Fax: 021 37 78 74 20
zodiac-deutschland@zodiac.nl
GREAT-BRITAIN
Zodiac U.K.
Tel.: 014 53 75 84 51
Fax: 014 53 75 29 39
zodiac-uk@zodiac.nl
M10 x 1.00
convex to 3/8
UNF convex
M10 x 1.25
concave to 3/8
UNF convex
M10 x 1.25
convex to 3/8
UNF convex
ITALY
Zodiac Italia
Tel.: 02 64 72 287
Fax: 02 64 74 95 55
zodiac-italia@zodiac.nl
SPAIN
Zodiac España
Tel.: 96 81 42067
Fax: 96 81 42068
zodiac-espana@zodiac.nl
NEW
237384
237519
N/A
237385
237520
N/A
237388
N/A
N/A
N/A
232187
N/A
NORWAY
Zodiac Scandinavia
Tel.: +46 (0) 1 71 47 32 40
Fax: +46 (0) 1 71 47 32 41
zodiac-scandinavia@zodiac.nl
1/8
NPTF
concave to UNF
convex
3/8
UNF
concave to UNF
convex
7/16
UNF
concave to UNF
convex
M12 x 1.50
concave to UNF
convex NEW
SWEDEN
Zodiac Scandinavia
Tel.: 01 71 47 32 40
Fax: 01 71 47 32 41
zodiac-scandinavia@zodiac.nl
HUNGARY
Zodiac Motorcycle Products Hungary
Tel.: 06 30 217 18 32
Fax: 06 87 480 882
zodiac@chello.hu
AUSTRIA
Europarts
Tel.: 05574 89174
Fax: 05574 85119
europarts@zodiac.at
K. Banjo bolt seal washers
Copper Aluminum Aluminum
Viton insert
232150 237532 348014
3/8” (10 mm)
copper, 10 pack
232143 237531 N/A
7/16” (11 mm)
FRANCE
FC Parts
Tel.: 03 27 85 57 15
Fax: 03 27 8a5 96 50
fcparts@wanadoo.fr
SWITZERLAND
American Bike Shop
Tel: 07 17 61 26 78
Fax: 07 17 61 06 78
abs-zodiac@rheintal.ch
PERFORMANCE PRODUCTS FOR HARLEY-DAVIDSON
®
33-011