Products for the electronic industry

PCB Magazines Series 100 / 180 / 300
There is a system behind it
The cab PCB magazines can be filled when standing vertical
or laying horizontal. The system is totally adjustable for width
and can be assembled according to your individual requirements. For different size PCBs we offer PCB magazines with
a height of 100, 180 and 300 mm.
All magazines have 32 slots, each with a 10 mm clearance
between them, thereby providing maximum use of available
space.
Secure
The precision molded slots are funnel shaped at each end to
simplify the insertion of each circuit board.
The location of each mounting slot is shown by yellow and
white positioning strips. These enable boards to be loaded
while avoiding the risk of being loaded by hand in the wrong
position.
Retractable
carrying
handles
17 mm
Consecutive
numbering and
color coding
Document
clamp
Double sided
rack wall
Support bar ensures
heavier PCBs
Profiled rail
Clearance to protect
protuding components
cab | 9
PCB Magazines Series 100 / 180 / 300
Fast and easy assembly
The magazine walls can be secured to
the profiled rails in any position required.
Two identically sized circuit boards are
inserted between the walls, into the
adjustment slots at the extreme ends
of each wall. The second wall is then
pressed firmly onto the boards and
screwed tight.
Rigid and stable
The magazine walls are constructed
in sandwich form, and are therefore
particularly rigid. For heavy mechanical
and thermical force the magazine walls
can additionally be reinforced by the
use of a steel rod.
Stackable
At the corners of each magazine are
male and female connectors which
allow the racks to be stacked upon another. The lower edge of each magazine-side has a molded recess which
allows the magazine to be gripped and
lifted without problem.
Vertical mounting
Before soldering, the circuit board must
be stored horizontally. The magazine
can therefore stand vertically.
cab | 10
Slot lock
To prevent damage to the PCB board
during insertion, we offer slot locks which
cover slots not in use.
PCB Magazines Series 100 / 180 / 300
with 32 slots
Flexing of the magazine walls under loading
When the PCB Magazine is correctly assembled, each side
wall may flex less than 1,0 mm, to ensure a secure mounting
of the PCB. The measurements were using 16 circuit boards,
with a clearance of 20 mm between each other, and a weight
per board of 500 g. Upon request, a copy of the test report is
available.
Critical loading can occur as follows:
1. When the magazine is laid on its side on a flat
surface, and then lifted.
2. When being transported in the vertical position,
and the position is changed to the horizontal.
The length of profiled rail (Dimension X) is calculated
based upon the dimensions as shown below.
x = 36 + D1
x = 52 + D1 + D2
Technical Data
Material
Color
100 180 300
Polypropylene
black
as per DIN EN
61340-5-1
< 10 9
Surface resistance
Dimensions
Slot width mm
Slot depth mm
Ammount
Distance of PCBs mm
Flexing with a total load of 8 kg
Temperature 23°C not reinforced
Temperature 23°C with reinforced
Temperature 70°C not reinforced
Temperature 70°C with reinforced
2.8
2.0
32
10
4.0
2.5
32
10
3.5
2.5
32
10
1.0
0.5
0.9
0.8
0.4
0.7
0.4
0.8
-
Dimension D = PCB Width
Dimension X = Length of Profiled Rail
x = 69 + D1 + D2 + D3
x ≥ 73 + D1 + D2
x ≥ 110 + D1 + D2 + D3
Delivery program
Part No.
8910063
Description
PCB Magazine
Testset 100
e.g. for 100 mm wide PCBs
Contents:
4 Side Walls 100
2 Profiled Rails
369 mm long
1 Document Clamp
Weight:
1.4 kg
Part No.
8910064
Description
PCB Magazine
Testset 180
e.g. for 100 mm wide PCBs.
Contents:
4 Side Walls 180
2 Profiled Rails
369 mm long
1 Document Clamp
1 Set Carrying Handles
Weight:
2.5 kg
Part No.
8910065
Description
PCB Magazine
Testset 300
e.g. for 233.4 mm wide PCBs.
Contents:
2 Side Walls 300
4 Profiled Rails
269 mm long
1 Document Clamp
1 Set Carrying Handles
Weight:
2 kg
cab | 11
PCB Magazines Series 100 / 180 / 300
Delivery program
PU = packaging unit
Part No.
8910050
8910102
83 mm
100 mm
359 mm
8910060
8910104
163 mm
180 mm
359 mm
8913913
357 mm
Description
Rack Wall 100
Rack Wall 100
reinforced
Rack Wall 100
with drilling for
Slot Lock
Weight PU 1
PU 2
0.28 kg 1 pieces 30 pieces
0.40 kg 1 pieces 30 piece
Rack Wall 180*
Rack Wall 180*
reinforced
0.53 kg 1 pieces 30 pieces
0.65 kg 1 pieces 30 pieces
0.28 kg 1 pieces 30 pieces
*incl. Drilling for
Slot Lock
8912049
8913914
Rack Wall 300
Rack Wall 300
0.7 kg 1 pieces 18 pieces
0.7 kg 1 pieces 18 pieces
285 mm
303 mm
with drilling for
Slot Lock
Length in mm
The profiled rails are supplied according to your
requirements, xxxx is the length in mm.
Slot Lock 1
Slot Lock 2
pictures increased
cab | 12
8910136
8910252
8910547
8911000
8912000
891xxxx
Profiled
Profiled
Profiled
Profiled
Profiled
Profiled
8910009
2 pieces
2 pieces
2 pieces
2 pieces
2 pieces
2 pieces
-
Document
Clamp
1 set
25 sets
8912004
8912005
8912006
Support Bar 100
Support Bar 180
Support Bar 300
1 set
1 set
1 set
10 set
10 set
10 set
8912007
8910097
Carrying Handle 100
Carring
Handle
180/300
1 set
1 set
25 set
25 set
8913916
8913917
Slot Lock 1
Slot Lock 2
100 set
100 set
-
Rail
Rail
Rail
Rail
Rail
Rail
0136
0252
0547
1000
2000
xxx
0.06 kg
0.11 kg
0.24 kg
0.45 kg
0.90 kg
PCB Magazines Series 600 / 700
for automated assembly lines
1 Locking knob for stacking purposes
2 Transport safety
3 Consecutive numbering on the
rack walls for easy feeding
4 The precision spindles ensure the
parallelism of the rack walls during
adustment
5 The gear belt allows for quick
adjustments in seconds
Automation Requires Precision
Precision, stability and flexible handling are important features
for the use of the PCB Magazines in automated assembly
lines.
The stable and robust frame construction guarantees a long
lasting use of the cab magazine in your production.
The rack walls are manufactured from conductive material.
Metal magazine
For high mechanical or
temperature use we
offer the magazine with
metal rack walls.
cab | 13
PCB Magazines Series 600 / 700
Series 600 - Width adjustment by
screw clamp
The series 600 is cost effective alternative with a simple width adjustment.
By backing off the four screw clamps
the moveable rack wall can be pushed
to the necessary PCB width.
Series 700 - Width adjustment
by gear belt
Handling different PCB sizes the magazines have to be adjusted to the PCB
width quite often. The PCB Magazines
of the series 700 are adjusted to the
necessary PCB width within seconds.
Protection cover
Permastat® ESD protection cover, robust
and tear proof. Protection of inserted
boards against pollution.
Magazine locked
Stackable
The magazines can be stacked and
secured space saving by four support
guides on the top of the plate.
cab | 14
Reversible
Through to the vertical symmetry all
magazines can be placed upside down
to work on double sided PCBs.
The stacking locator knobs must be
replaced.
Magazine unlocked
Transport safety
To secure the PCBs while transporting
the magazine, a safety bar is mounted on
the front and back side of the rack wall.
PCB Magazines Serie 600 / 700
49 x 10,0
10
5
H
B'
E'
3,4
Dimensioned drawing
E
C
D
W
A
65
B
3
L
cab | 15
PCB Magazines Serie 600 / 700
Delivery program / Dimensions
Temperature
L
W
H min. max. max.
kg mm mm mm mm mm mm
Dye cast
aluminium
Steel sheet
Pitch
C°
Insertions
Screws
Gear belt
Stackable
Reverse
opeation
60
130
200
50
100
200
5,6 355 320 563
5,9
6,9
40
250
342

-
34
34
34
9
9
10
50

-


602.1 8917602
602.2 8916602
602.3 8915602
60
130
200
50
100
200
5,8 400 320 563
6,1
7,2
40
250
387

-
34
34
34
9
9
10
50

-


603.1 8917603
603.2 8916603
603.3 8915603
60
130
200
50
100
200
6,2 400 380 563
6,5
7,6
40
310
387

-
34
34
34
9
9
10
50

-


701.1
701.2
701.3
8917701
8916701
8915701
60
130
200
50
80
100
5,6 355 320 563
5,9
6,9
40
250
342

-
34
34
34
9
9
10
50
-



702.1
702.2
702.3
8917702
8916702
8915702
60
130
200
50
80
100
5,8 400 320 563
6,1
7,2
40
250
387

-
34
34
34
9
9
10
50
-



703.1
703.2
703.3
8917703
8916703
8915703
60
130
200
50
80
100
6,2 400 380 563
6,5
7,6
40
310
387

-
34
34
34
9
9
10
50
-



704.1
704.2
704.3
8917704
8916704
8915704
60
130
200
50
80
100
7,8 460 400 563
8,0
9,5
10
330
447
-

34
34
34
9
9
10
50
-



705.2
705.3
8916705
8915705
130
200
80
100
8,7 535 380 570
10,1
10
310
522
-

34
41
34
16
9
10
50
-


-
715.2
715.3
8916715
8915715
130
200
80
100
8,7 535 380 563
10,1
10
310
522
-

34
34
34
9
9
10
50
-



706.2 8916706
706.3 8915706
130
200
80
100
9,5 535 460 570
10,9
10
390
522
-

34
41
34
16
9
10
50
-


-
716.2
716.3
8916716
8915716
130
200
80
100
9,5 535 460 563
10,9
10
390
522
-

34
34
34
9
9
10
50
-



707.2
707.3
8916707
8915707
130
200
80
100
9,7 535 530 570
11,1
10
460
522
-

34
34
41
9
16
10
50
-


-
717.2
717.3
8916717
8915717
130
200
80
100
9,7 535 530 563
11,1
10
460
522
-

34
34
34
9
9
10
50
-



708.2 8916708
708.3 8915708
130
200
80
100
9,6 535 470 570
11,0
10
400
522
-

34
41
34
16
9
10
50
-


-
718.2
718.3
8916718
8915718
130
200
80
100
9,6 535 470 563
11,0
10
400
522
-

34
34
34
9
9
10
50
-



709.2
8916718
130
80
9,6 535 580 570
10
510
522
-

34
41
34
16
9
10
50
-


-
719.2
8915718
130
80
9,6 535 580 563
10
510
522
-

34
34
34
9
9
10
50
-



Type
Article
No.
601.1
601.2
601.3
8917601
8916601
8915601
C°
Weight
Ambient
Cover/
basem.
Insertions
PCB
External
measurements
Width
D
The PCB-magazines xxx.1 and xxx.2 are delivered half-assembled.
Assembled magazines can be ordered with additional article numbers.
All metal magazines are delivered complete mounted:
600-series reversible version, 700-series stackable version.
DL31001
Assembled with staple neps
DL 31002
Assembled for reserve operation
Series
Material
side wall
Surface
resistance
60x.1
70x.1
Polystyrene
as per DIN EN
60x.2
70x.2
Polycarbonate
61340-5-1
60x.3
70x.3
Metal*
< 10 9
ESD Protection cover Permastat conductive discharge
*Measured from rack wall to frame
cab | 16
Length
C
A
B B‘ E E‘
mm mm mm mm mm mm
ESD Protection cover
Color: pink, Thickness: 150 µm (PU = 10 pcs.)
Type Art.-No.
601/701
602/702
603/703
704
706/716
707/717
8916411
8916412
8916413
8916414
8916416
8916417
Protection cover also for
other models on request.
Edition 8.2
Headquarters in Germany
cab subsidiaries
350 distribution partners
in more than 80 countries.
cab is represented in every active
commercial center - worldwide.
www.cab.de
Germany
France
South Africa
Asia
cab Produkttechnik
cab technologies s.a.r.l.
cab Technology (Pty.) Ltd.
cab Technology Co, Ltd.
GmbH & Co KG
67350 Niedermodern
2125 Randburg
Postfach 1904
Téléphone +33 388 722 501
Phone +27 11-886-3580
Junghe, Taipei, Taiwan
76007 Karlsruhe
www.cab.de/fr
www.cab.de/za
Phone +886 2 8227 3966
Wilhelm-Schickard-Str. 14
info.fr@cab.de
info.za@cab.de
www.cab.de/tw
76131 Karlsruhe
info.asia@cab.de
Telefon +49 721 6626-0
Telefax +49 721 6626-249
USA
China
www.cab.de
cab Technology Inc.
cab (Shanghai) Trading Co., Ltd
info@cab.de
Tyngsboro MA, 01879
Representatives in other
countries on request.
Phone +1 978 649 0293
Phone +86 21 6236-3161
www.cab.de/us
www.cab.de/cn
info.us@cab.de
info.cn@cab.de
This documentation and any translations hereof are the property of cab GmbH & Co KG. The replication, processing, reproduction or distribution in whole or in parts requires our prior written consent. © Copyright bei cab/9008452.
All delivery, design and technical specifications are compiled to the best of our current knowledge and are subject to change without prior notice.