Automatic honey extracting line

Transcription

www.lyson.com.pl
catalogue 2016
- basic version
Automatic honey extracting line full version
with the uncapping device, capping extruder,
horizontal honey extractor for 52-80 frames,
honey sump and pump for honey
with the uncapping device, capping extruder,
horizontal honey extractor for 52-80 frames,
honey sump and pump for honey
W20961
W20967
- basic version
Automatic line - full version
A
C1
C
E
Basic version structure:
»» A Automatic uncapping
device for frames (capacity
5-8 frames/min, electrically
heated blades)
»» B Extruder for cappings
(separating the honey from
the wax), capacity 200 kg/h
»» C C1 Feeder for frames
with hand loading cartload,
combining uncapper with
honey extractor
»» D Honey sump 120 l with
a float switch
»» D1 Honey pump
»» E Radial honey extractor,
horizontal, for 52-80 frames,
with automatic control (it has
7 programs)
»» F Hanger for extracted
frames
F
D1
D
B
C2 Feeder for frames with
electrical loading cartload
A
C2
C
G
D1
D
B
A
Additional options for the basic version:
A1 Frames pneumatic
ejector, chain feeder connected
A1
G
Roller conveyor
for bodies
F
Basic version structure:
»» A Automatic uncapping
device for frames (capacity
5-8 frames/min, electrically
heated blades)
»» A1 Frames pneumatic ejector, chain feeder connected
»» B Extruder for cappings
(separating the honey from
the wax), capacity 200 kg/h
»» C C2 Feeder for frames
with electric loading cartload
»» D Honey sump 120 l with
a float switch
»» D1 Honey pump
»» E Radial honey extractor,
horizontal, for 52-80 frames,
with automatic control (it has
7 programs)
»» F Hanger for extracted
frames
»» G Roller conveyor to nozzle
bodies
F
Automatic
frame
uncapper
Extracted
frames
hanger
capacity:
5-8 frames/min,
electrically heated
blades
capacity:
52-80 frames
E
2
E
D D1
Horizontal honey
extractor
Honey sump
with a pump
Capacity of honey
extractor
500 kg
of honey / 1 hour
pump flow
up to 1500 l/h
3
Frames pneumatic ejector,
chain feeder connected
Honey sump with a pump
A1
In the pneumatic ejector frames are pushed from the bottom of the hive housing
and then transported for further uncapping by the feeder.
»» The pneumatic ejector to the
frames with a pneumatic piston,
compressor – powered, working pressure of about 2 bar
(compressor power ejector not
included).
»» Chain feeder with a capacity of
10 frames;
»» Electric drive motor power
0,09 kW (optional extra charge)
»» Honey sump with honey-level
sensor and pump,
»» Sump capacity: 120 l
»» Pump capacity: up to 1500 l/h
»» Pump power: 1,5 kW
Horizontal honey extractor
Automatic frame uncapper
A
Automatic uncapper:
»» Knives drive power: 0.18 kW;
»» Electrically heated knives;
»» 2x 0.4 kW, knives warm-up time
of about 5 min.;
»» Uncapping efficiency:
5-8 frames/min
4
D D1
E
Horizontal honey extractor:
»» Capacity 52-80 frames;
»» Motor power 1.5 kW;
»» Engine rpm : 2800 r/min;
»» Type of gear unit 50;
gear ratio 1:10;
»» Max. basket rotations: 280/min;
»» Efficiency of honey extractor
1500 kg/h
5
Suction-press pumps
for creaming and pumping honey
Feeder for frames
with loading cartload
C
C1
2-year
warranty
Suction-press pump for
honey is used for pumping over large amount of
honey in relatively short
period of time.
Feeder for frames with loading
cartload
»» Capacity 52-80 frames.
»» Loading cartload operated manually (in the basic version) or with
electric drive (optional in the full
version).
Suction-press pump 0,37 kW:
»» Capacity: up to 900 l/h at a
temperature of honey 30°C
»» Power 0.37 kW
»» 400 V power supply
»» With the use of inverter,
power converted to 230 V and
smooth adjustment
»» Intuitive, simple, user-friendly
controls
Suction-press pump 1,5 kW:
»» Capacity: up to 1500 l/h at a
temperature of honey 30°C
»» Power 1.5 kW
»» 400 V power supply
»» With the use of inverter,
power converted to 230 V and
smooth adjustment
»» Intuitive, simple, user-friendly
controls
Hanger for uncapped frames
F
W2021GN
Suction-press pump for creaming and pumping honey, 0,37 kW, 400 V
W20210GN Suction-press pump for creaming and pumping honey, 1,5 kW, 400 V
»» Hanger for uncapped frames;
»» Capacity: 52-80 frames
W2021GNF Suction-press pump for creaming and pumping honey, 0,37 kW, 230 V
W20210GNF Suction-press pump for creaming and pumping honey, 1,5 kW, 230 V
110031
Roller conveyor for bodies
Rotor to suction-press pump
1.5 kW
G
110030
Rotor to suction-press pump
0,37 kW
307004
6
»» Roller conveyor for bodies
(optional extra charge)
Set of sealings
for suction-press pump
7
Automatic feed uncapping machines with
capping extruder with 2in1 control
Mini honey extracting line
2-year
warranty
2-year
Specifications:
warranty
»» Power 0.75 kW
»» Transmission i10
»» Engine speed 2800 rpm.
»» Operation speed
280 rpm
»» The device is made of
stainless steel
»» Automatic Controler
HE-03
W20986E_P
This device consists of
three elements: automatic feed uncapper,
frame storage table and
capping extruder.
Uncapping table is available in several variants:
- automatic feed uncapping machine with
automatic feeder, power
supply 400V or 230V,
with capping extruder
50 kg/h or 100 kg/h.
W20959
Mini honey extracting
line
The device consists of 30 frame horizontal extractor, with manual
loading feeder and a single path receiver for 30 frames. The tray
located under the uncapped frames is fitted with a 5/4” ball valve
drain.
Dimensions of the mini uncapping and extracting line:
»»Total length: 318 cm
»»Total width: 135 cm
»»Total height: 157 cm
8
During the process of uncapping frames, there is a waste in the form of
cappings containing honey. The best way to recover honey from cappings
is to perform this process during uncapping. The design of this device allows for immediate separation of the remaining honey and the wax.
W20986E_P
Automatic feed uncapping machine “Premium”, 400V,
with electric heated blades and with capping extruder
50 kg/h
W20986Z_P
Automatic feed uncapping machine “Premium”, 400V,
with closed circuit and with capping extruder 50 kg/h
W20987E_P
Automatic feed uncapping machine "Premium", 230V,
50 kg/h
W20987Z_P
W20982E_P
100 kg/h
W20982Z_P
W20983E_P
100 kg/h
W20983Z_P
9
Capping extruders
Uncapping devices
with capping extruder
The device is available in four variants of efficiency: up to
50 kg/h, 100 kg/h, 200 kg/h and 500 kg/h. The machine is
designed to separate the honey and ironing cappings in a mechanical way.
This process takes place inside a perforated cylinder where
rotating separation-compression module squeezes the honey
which enters the holes between the separating shaft
and the perforated sheet metal and trickles onto a
sieve underneath, while the remaining wax is pushed
and compressed by the screw within the extruder
and is then extended. As an effect we get a dry wax
ready for remelting.
This device consists of three elements:
uncapping machines, frame storage table and cappings
extruder.
Uncapping table is available in three variants:
a) manual
b) with manual feed uncapper
c) with automatic feed uncapper
The uncapping table combined with the cappings extruder
improves work efficiency and reduces waste of honey.
2-year
warranty
W20984
Uncapping manual table with capping
extruder 50 kg/h
W20985
Manual feed uncapping machine with
capping extruder 50 kg/h
W20986E
Automatic feed uncapping machine,
400V, with electric heated blades
and with capping extruder 50 kg/h
W20986Z
400V, with closed circuit and
with capping extruder 50 kg/h
W20987E
W20987Z
The machine is small
sized and user-friendly.
W20980
Uncapping manual table with capping
extruder 100 kg/h
The controller allows you
to adjust the speed of the
motor.
W20981
Manual feed uncapping machine with
capping extruder 100 kg/h
W20982E
W20982Z
W20983E
W20983Z
2-year
warranty
The entire construction is made of the highest quality
stainless steel. The device is equipped with wheels for
easy transport.
One of the main advantages of the device is the ease of
use of the driver and compact dimensions.
Additional advantages of the extruder is a 230V power
supply, and precise construction of all elements of the
machine.
The extruder may also be used in the food industry as a
fruit press.
10
Capping extruder
50 kg/h
Power supply 230V
Power 0,55 kW
Regulated motor
rotation speed:
max 14 rev/min
Capping extruder
100 kg/h
Power supply 230V
Power 0,55 kW
Regulated motor
rotation speed:
max 14 rev/min
Capping extruder
200 kg/h
Power supply 230V
Power 0,55 kW
Regulated motor
rotation speed:
max 14 rev/min
Wymiary:
»»Height 68 cm
»»Width 41 cm
»»Length 105 cm
Wymiary:
»»Height 80 cm
»»Width 52 cm
»»Length 128 cm
Wymiary:
»»Height 92 cm
»»Width 75 cm
»»Length 135 cm
W20970
W20966
W20965
W209
Pusher
W20983
Optional equipment:
Pusher can be fitted onto the edges of the pouring funnel. Construction is made of stainless
steel. Pressing plate made of polypropylene
All manual and automatic feed uncapping machines with frame storage
tables
During the process of uncapping frames, there is a waste arising in the form of cappings containing honey.
The best way to recover honey from cappings is to perform this process during uncapping.
The design of this device allows for immediate separation of the remaining honey from wax.
11
Wireless electronic
Bee hive weight scale
Beehive stand
SMS
256CB
256CB
Galvanized steel beekeeping rack designated for beehives,
when folded creates a comfortable versatile bench.
For pedestal installation requires two stands and two wooden
beams with dimensions of 40×60 mm. Individual stand has
one adjustable foot which allows positioning of the entire
stand even on uneven terrain. Optionally at the proper beams
lenght rack can accommodate 5 hives.
This arrangement does not require many individual stands, it
is stable and durable and minimizes the cost of expenses associated with the purchase of a separate racks.
Weight scale + adapter USB
W4033
Beehive stand
1 pcs.
W4033K
Beehive stand
2 pcs.
Following components are required for the functioning of the set:
»» weight scale + adapter USB (256CB)
»» sim card (not included)
»» 6 AA battery cells (not included)
»» software available on
www.lyson.com.pl
Wooden bars are not
included.
Honey bottler with mini turn table
By decreasing the dimensions of the table and removing
the racks, the size of the device is significantly reduced allowing its usage also in the smaller workshops.
12
Slight dimension makes the work easier for one person
during the process of filling the jars.
Dimensions of the
product:
»» Length: 81 cm;
»» Base width: 50 cm
»» Height: 63,5 cm
»» Turntable diameter:
60 cm
Description:
Weight scale designed to monitor and report of behive’s
weight changes. On this basis, we can draw conclusions
about what is happening in the apiary, eg. Honey production
rate, what is the consumption of food stocks.
Weight scale is mounted in one of the hives, it has a large
worktop 62×62 cm and stable stand. Seperate SIM card is
required for the unit to be able to send notifications.
Information about hive weight can be received as follows:
»» Text message notification (SMS) – in a regular manner
the device sends an information at the chosen time preset
by the owner to user specified phone number. Message
contains last 5 weight readouts.
»» Using handheld controller or a portable computer - up
to about 50m from the weight. User can receive the last 5
measurements recorded by the device.
Main features:
»» solid and stable
»» 4 electrocic sensors
»» durable construction
»» anty-theft alarm
»» only one adapter for few scales
The scale is compatible with the controlBee anti theft alarm
and positioning system.
Weight scale is equipped with anti-theft system, as well.
Power source – 6 AA battery cells, battery life up to 6
months.
Operation variants:
»» USB adapter – after installing in your own computer it
allows to connect with weight scale and configuration is
possible, rande up to 50 m from the (Microsoft Windows
required)
W204013
Honey bottler with mini turn table
W204012
Mini turn table
W204012
W204013
13
Honey dispensing
automatic line
Honey bottler
and automatic turn table
W204000
2-year
Honey bottler
warranty
W204011
Stand for honey bottler
W204001
Honey bottler with stand
W204003
Honey bottler with stand “Premium Line”
W204003
Honey bottler with
stand “Premium Line”
W204004
Honey dispensing
automatic line
The line consists of:
»» 2 turn tables with the diameter of 900 mm
»» Honey dispenser
»» Honey bottler “Professional Line”
»» 2000 mm conveyor belt for jar filling
The device has been designed to be used by one person so
that she/he can manage the jar filling process easily.
The conveyor belt for carrying jars stops automatically
when the jar is placed under the dispenser.
Filling range from 250 g to 45 kg.
High efficiency of larger jars filling thanks to the larger impeller implemented
Labeling module for
Automatic Dosing Line
Dedicated module for W204004 honey dosing line. Automatic
labeling machine is designated for automatic sticking on selfadhesive labels on jars, significantly simplifying work process
with labeling of filled jars.
Device was designed to work with jars of capacity from 250g
to 1250g. Labeler is equipped with modern microprocessor
controller, photoelectric sensor, responsible for positioning
of jars and fork optical sensor, responsible for positioning of
labels. Labeling efficiency depends on dispenser speed.
14
Technical data:
»» supported labels: selfadhesive
»» maximum label height:
120mm
»» external roll diameter:
240mm
»» inner roll diameter:
40-76mm
»» work pressure: 2-4bar
»» label guides: stainless with
aluminium-polyurethane
bearings
»» device dimensions:
lenght: 700mm
width: 900mm
height: 950mm
»» power: 230V/50Hz
Main characteristics:
»» adjustable speed conveyor
belt
»» side guides for transportaion of jars with adjustable
spacing
»» label dispenser driven by
step motor
»» pneumatic jars separator
»» compatible with jars within
the size range between
250g and 1250g
W7052
100 l heated tank
W7051
300 l dual chamber
heated tank
W4086
Labeling module for
Automatic Dosing Line
W204002
Technical data:
»» Total lenght: 3,8 m
»» Each element has got
separate steering.
»» Table power: 200W/pc
»» Dispenser
power:1,5kW
»» Both turntables and
dispenser are made
of acid-resistant stainless steel.
»» The whole line is fitted
onto a rack equipped
with wheels for easy
moving.
Honey bottler
“Standard” with
automatic turn table
W204001
Honey bottler with
stand
Honey bottler structure:
»» Device for dispens- »» Hose pipe
ing, creaming
»» Hose to pump conand pumping
nector
honey
»» Hose clamp
»» Dispensing starting »» 1,5 meter hose
pedal
Specification for honey bottler
W204003 and W204001:
»» Self-pumping, slow-rotating
pump with silicone impeller
»» A device controlled by computer
technology
»» Fills about 350 jars of 500 g per
hour (depending on the type
and density of honey).
»» Filling accuracy +/- 1 g
»» Filling range
from 50 g to 45 kg
»» Can be used as a pump
»» All parts that have the direct
contact with honey are made of
stainless steel or plastic approved for contact with food
»» 230 V/200 W
Automatic turn table for honey bottler
Honey bottler with an automatic turn table
W204002P Honey bottler with an automatic turn table Premium Line
W204010
W204002
The device consists of:
W204010
Automatic turn table
to be used with
honey bottler
Automatic turn table is a great device, which
significantly increases the efficiency of work,
accelerating the filling jars.
»» Honey bottler “Standard’
»» Table base height-adjustable base allows for the regulation of the
dispensing device’s height, it is equipped with wheels
»» Turn table made of stainless steel. The table top is divided by jars
guide - into two parts. The first part is for the empty jars to fill in; whilst
the other is for the filled ones,
»» The controller that regulates the speed of the table
Technical parameters of the table:
»» Ø of the top 90 cm
»» Height: 82 cm
»» Volume of filled jars dimensions:
min.diameter 3 cm, max.height 4.5 cm,
max.diameter:15 cm, max.height: 30 cm
»» Power supply: 230V/200W
15
Honey dehydrators
2-year
Auger pump
warranty
Pump is made of stainless steel with a solid mounting frame
and is suitable for pumping honey. There is screw conveyor
inside the duct.
The pump can be mounted to a wall or set on a barrel with the
help of a dedicated cross-bar (included).
The device is used to evaporate water from the honey.
The water contained in honey should not exceed 18%.
To prevent spoilage of the fresh honey, excess of water
should be removed. Capacitor removes water from honey
by using warm air and platters rotating at a speed of up to
9 rev/min.
Specifications:
»» Heating power:
1200W/230V
»» Motor: 370W
»» platter diameter:
Ø620 mm
»» 9 revmin
W4021
2-year
W20210S
Specifications:
»» Heating power:
1200W/230V
»» Motor: 550W
»» platter diameter:
Ø620 mm
»» 14 rev/min
warranty
Honey Pumping
set - Auger pump
400V,1.5kW
Honey temperature approx. 40C, syrup temperature approx. 20C.
The ratio of pumped honey to the hight of honey column.
[ l / h ]
W4020
W20210S
3500
2900
3000
2700
2400
2500
1900
2000
1400
1500
1000
500
0
Specification:
»» Power 1,5 kW
»» Voltage 400 V
»» Pumping speed
from1500 l/h to
3000 l/h
»» Rotation 2800 rpm
W4021
W4020
1
2
4
5
Column [m]
These devices allow to control the level of honey in the
tank.
4103
Mechanical
sensor of honey
level
230V/400V
Honey dehydrator (300 kg) ~220l
Honey dehydrator (150 kg) ~110l
3
4101
Honey level
sound allarm
(9V battery)
4102
Mechanical
sensor of honey
level
230V
Honey pumping pipe
The pipe must be firmly attached to the barrel’s wall with the grip.
A pipe is made of acid-resistant stainless
steel with two replaceable adapters for hose:
Ø50 and Ø40 mm.
W202
Honey pumping
pipe
16
17
Stainless steel tanks
Stainless settlers with conical
bottom
2-year
2-year
warranty
warranty
W71P
W72P
W73P
W74P
W75p
W76P
All listed tanks are made of
polished stainless steel with the
thickness of 2 mm.
The bottom is conical, what allows to complete the draining.
W852
Stainless tank 500 l with cover and with integrated stand
W852P
Stainless tank 500 l, with heating with cover and with integrated stand
W852M
Stainless tank 500 l, with stirrer with cover and with integrated stand
A ball valve 2 “ is placed in the
bottom.
Tanks have a reinforced stand
made of stainless steel and a
stainless cover.
W852MP Stainless tank 500 l, with stirrer and with heating with cover and with integrated stand
W853
W853P
W853M
W854
W854P
W854M
Stainless settler 30 l "Premium" with conical
bottom, valve 5/4", with handles (Ø 400, total
H: 445)
H: 595)
H: 760)
H: 750)
bottom, valve 2", with handles (Ø 500, total
H: 910)
bottom, valve 2", with handles (Ø 600, total
H: 910)
The round stainless stand is welded to the settler.
There is a threaded pipe with elbow welded to the
settler’s bottom.
The pipe is connected to the wall of the stand.
The flap valve is screwed to the pipe in the round
stand.
Settlers are equipped with stainless steel cover with
rubber seal secured with clasps.
bottom
top
Stainless settlers with conical bottom
capacity l
diameter Ø
thickness
of steel
height of the
upper tank
total height
valve
buckles
30
50
70
100
150
200
400 mm
400 mm
400 mm
500 mm
500 mm
600 mm
0,6 mm
0,6 mm
0,6 mm
0,6 mm
0,6 mm
0,6 mm
285 mm
435 mm
600 mm
590 mm
720 mm
720 mm
445 mm
595 mm
760 mm
750 mm
910 mm
910 mm
5/4 '
5/4 '
5/4 '
6/4 '
2'
2'
2
2
2
3
3
3
18
19
Radial and cassette honey extractors
»» made of best quality components
»» entirely made of stainless steel
Design
Stand is made of stainless steel.
Stable and easy to dismantle.
Drum is made of acid resistant stainless steel, 0,8 mm
thick, strengthened and reinforced, with 2 drains 2’’. The
bottom is conical, made of acid resistent stainless steel,
1 mm thick
Transparent lids, made of meta-plexi, allowing for observation of the spinning process, without having to open them,
and risking the danger of contact with the rotating basket.
“Premium Line” honey extractors are available
from Ø800 to Ø1200 mm with full automatic
steering.
In all extractors the drive is located underneath
the basket.
5-year
warranty
Cassette honey extractors
Gear. A worm gear drive is applicated. The axis of honey
extractor’s basket is directly coupled with the gear.
Drive. Honey extractor drive consists of a high gearmotor gear series THF eco-line,directly coupled to the axis of
the basket of honey extractor inverter-enabled optimization
of the system. The implemented drive can reduce power
consumption by up to 35% whilst maintaining the excellent
technical parameters of honey extractor.
The use of a series of gear THF increases the life of the
device, as well as reduces the noise.
W205000_P
Honey extractor, Ø 800 mm, cassette for German frame
"Deutsch Normal" (6),
W205001_P
Honey extractor, Ø 800 mm, cassette Langstroth (6),
W205400_P
Honey extractor, Ø 1000 mm, cassette Dadant (6),
W201600_P
Honey extractor, Ø 1000 mm, cassette for German
frame "Deutsch Normal" (8),
W201601_P
Honey extractor, Ø 1000 mm, cassette Langstroth (8),
W205500_P
W205300B_P
with full automatic steering
with stainless partitions, with full automatic steering
W2053001B_P Honey extractor, Ø 1000 mm, cassette Langstroth (12),
W20570B_P
W205200B_P
W2052001B_P Honey extractor, Ø 1200 mm, cassette Langstroth (16),
W209900B_P
W2099001B_P Honey extractor, Ø 1200, cassette Langstroth (20),
The cassette basket is fully reinforced, made of acid resistant stainless steel rods, equiped with cassettes, which
design allows for securing the frames from breaking the
honey combs. Cassettes are joined together by springs
which allow them to return to the initial position.
Basket is additionally positioned in two housing: upper
and lower.
The radial basket is entirely made of stainless steel acidresistant rods. Rings of basket are equipped with properly
shaped mounting frames to prevent falling over during
centrifugation. It is also journalled in two housings: upper
and lower. The basket has got a reinforced construction.
Advanced automatic steering
The HE-03 is equipped with the latest electronic, computing and
process - steering automatics solutions.
It has been designed to provide the end-user with intuitive, user friendly
and reliable device.
The main features of of HE-03 include:
»» 8 fully programmable automatic cycles
»» Large (4,3”) TFT graphical display with energy-saving LED ilumination
»» Resolution: 480x272 pixels
»» 8 ergonomically designed steering buttons
»» Easy to use and intuitive interface with high-resolution icons that
enables its viewing in all light conditions.
»» Extracting cycles graphical editor with built-in parameters
autocorrection
»» 2 independent timers to measure the extractor working time
»» Advanced diagnostic-controlling funcions to constantly monitor
steering parameters.
»» Collaboration with high qualty vector inverter by Mitsubishi
20
Radial honey extractors
W2005000_P
Radial honey extractor, Ø 800 mm,
W2006000_P
W2007000_P
W2008000_P
Cassette honey extractors - number of cassettes on
drum's diameter
diameter
drum Ø
720
800
1000
1200
drain
1×6/4”
1×6/4”
2×2”
2×2”
German frame "DN", Langstroth
Dadant
number
number of drum
drum height
of cassettes
cassettes height
4
600 / 700
6
600 / 700
4
700
8 / 12*
600 / 700
6
700
12* / 16* / 20*
700
8 / 12*
750
* - honey extractors with metal sheet baffles
Radial honey extractors - number of frames in the basket - 25 mm beam
drum
drum
height
Valve
Ø 720
Ø 800
Ø 900
Ø 1000
Ø 1200
600
600
600
600
600
1x6/4”
1x6/4”
1x6/4”
2x2”
2x2”
NUMBER OF FRAMES
Langstroth Dadant, Dadant /½
18
30
42
42
56
-/18
-/30
24/42
36/42
56/56
COMMENTS
6 sectors
6 sectors
6 sectors
6 sectors
8 sectors
21
New PREMIUM LINE of tagential
honey extractors
5-year
warranty
New PREMIUM LINE of
radial honey extractors
Huge advantage of PREMIUM honey extractors, Ø 500,
600mm, are compact dimensions, universal basket for
frames and power supply 230V and 12 V. This approach
allows to use of an alternative power source.
W2002P
3-Frame tangential honey extractor “Premium”,
Ø500 mm, manual drive
W2012P
3-Frame tangential honey extractor "Premium",
Ø500 mm, electric drive 230V/12V
5-year
warranty
Huge advantage of PREMIUM honey extractors,
Ø600mm, are compact dimensions, universal basket for
frames and power supply 230V and 12 V. This approach
allows to use of an alternative power source.
universal basket
universal basket
W20120P Ø500 mm, manual+electric drive 230V/12V
universal basket
W2003P
Ø600 mm, manual drive
W2013P
4-Frame tangential honey extractor, Ø600 mm
"Premium", electric drive 230V/12V
universal basket
universal basket
W20130P Ø600 mm, manual+electric drive 230V/12V
universal basket
22
Radial honey extractor “Premium”, Ø600 mm,
W202P
W203P
Description of honey extractor
3,4-frame tagential honey extractors are made of acidresistant stainless steel. Available with manual, electric or
manual+electric drive.
The drum is made of acid-resistant stainless steel,
strengthened and reinforced, with a drain.
The whole drum is made of steel with thickness 0,6mm.
The stand is made of stainless steel.
Construction of the tangential basket - Tangential basket
made of acid-resistant stainless rods, with a thickness of
0.3 mm and 0.5mm. The bottom of the drum is made of
acid-resistant stainless steel with the thickness of 0.8mm
Manual metal drive mechanism made of steel and it is
powder coated. Sprocket-wheels made of steel, transferring torque to the axle of basket (by turning).
Electric drive 230 V /12V power supply, equipped with the
new control system.
Transparent Cover, made of acrylic glass, protects against
the danger of contact with a rotating basket and helps to
stay clean.
One stainless steel drain valve 5/4”
W201P
manual drive
electric drive 230V/12V
manual+electric drive 230V/12V
Description of honey extractor
Radial honey extractors are made of acid-resistant stainless steel. Available with manual, electric or manual+electric
drive.
Construction of the drum The drum is made of acid-resistant stainless steel. The side of the drum is made of steel 0,6
mm steel, the cone-shaped bottom is made of steel 0,6 mm
thick.
The stand is made of stainless steel.
Manual metal drive mechanism made of steel and it is
powder coated. Sprocket-wheels made of steel, transferring
torque to the axle of basket (by turning).
Electric drive 230 V /12V power supply, equipped with the
new control system.
Transparent Cover, made of acrylic glass, protects against
the danger of contact with a rotating basket and helps to stay
clean.
One stainless steel drain valve 5/4”
23
Pollen dryers
30-100 kg
Pollen dry cleaner
Pollen dry cleaner is a device designed for
separating pollen from contamination.It consists of a centrifugal fan made of several flat
blades and a set of two movable sieves.
2-year
warranty
Pollen dryers dimensions
100 kg
60 kg
30 kg
1. External dimensions:
»» width
1150 mm 1150 mm 1045 mm
»» height
1390 mm 950 mm 840 mm
»» depth
655 mm 650 mm 545 mm
»» width (of the opening through
660 mm 660 mm 555 mm
which the trolley passes)
»» height (of the opening through
1360 mm 925 mm 815 mm
which the trolley passes)
»» wall of the chamber - thick20 mm
20 mm
20 mm
ness
W32620
2. Trolley dimensions
»» width
»» height (with wheels)
»» depth
»» number of dryers:
»» width of dryer
»» length of dryer
»» depth of dryer
»» height of wheels
100 kg
655 mm,
1350 mm,
595 mm
20 szt
565 mm
565 mm
30 mm
115 mm
Pollen dryers parameters and specification
pollen dryer entirely made of
yes
acid resistant stainless steel
heaters power
2×2 kW
possibility of using one or two
yes
heaters
temperature controller
yes
Power supply
400V
ventilator
2×100W
W326200
60 kg
W3262000
W326200
W32620
655 mm
910 mm
595 mm
12 szt
565 mm
565 mm
30 mm
115 mm
550 mm
810 mm
490 mm
10 szt
460 mm
460 mm
30 mm
115 mm
yes
yes
2×2 kW
1×2 kW
yes
no
yes
400V
2×100W
yes
230V
100W
Chamber for pollen drying, stainless steel
(for 30 kg of pollen)
W3262000
Pollen dry cleaner
The device has been
equipped with 2 engines:
»» fan motor
120W / 2800 rev/min
gear 25/7,5
»» sieves motor
90W / 1400 rev/min
gear 25/7,5
2-year
warranty
W3214
Pollen dry
cleaner large
»» Centrifugal fan made of four
flat blades (43×15 cm) and
a set of two movable sieves
(40×32,5 cm).
»» The sieves are reinforced with
stainless steel wire mesh with
the wire thickness of 0.5mm
and the eyelet width of 3mm.
»» Pollen intake door dimensions:
45×45 cm.
The controller enables easy
and flexible adjustment of
the number of rotations.
Dimensions:
»» Height: 96 cm
»» Width: 70 cm
»» Lenghth: 105 cm
It comes with the adjustable
sieve alignment.
The device is equipped with
safety mechanism, protecting the body against injury.
Pump for royal jelly
Device allows pumping off royal jelly from a cell
in a quick and effective way
Efficiency 10ml/1min
30 kg
This dryer is completely made of acid-resistant stainless steel.
The device consists of two components: the
heating cabinet and a trolley with trays for
pollen.
Controller in 60 kg and
100 kg pollen dryers
facilitate pollen drying
using one or two heaters.
Pollen dryers are
equiped with digital
temperature controller
(temperature control in
the range 30-55°C.
24
This device features:
»» adjustable angle of sieve inclination,
»» smooth regulation of pollen intake speed,
»» ergonomical control.
Pollen dry cleaner consists of:
W011
12V
Heater power: 12W
Width: 280 mm
Length: 270 mm
Height: 165 mm
Components:
»» 5 Bottles of 100 ml
»» 2 Wires connection
»» 1 Power cord 12V
»» 1 Glass suction
mouth
Trays, on which the pollen is placed can be easily removed thus
controlling the process of pollen drying
W010
230V
Heater power: 20W
Width: 280 mm
Length: 270 mm
Height: 165 mm
Components:
»» 5 Bottles of 100 ml
»» 2 Wires connection
»» 1 Power cord 230V
»» 1 Glass suction
mouth
25
Honey filter
Honey pressure
filter
2-year
2-year
warranty
warranty
4 – nozzle honey filter
Consists of 2 stainless steel pipes, acid – resistant, with
the diameter of 48mm (6/4").
The vertical pipe is finished with the connector that
enables easy filter-to-pump hose insertion.
The horizontal pipe is equipped with 4 nozzles with the
diameter of 42mm (5/4") with ball valves and flexible
sieves.
The entire structure rests on 4 legs with adjustable
spacing for easy fitting onto all types of uncapping
tables.
Each of these 4 filters can be switched on or off by
turning the appropiate valve. It is useful during the
cleaning of each filter.
The filter can be fitted onto 1000 or 1500 mm tables.
All components are made of acid-resistant stainless
steel. The device is user-friendly, easy to transport and
clean as the requiered elements are easily dismantable.
Vertical pressure
filter, large area of
filtration, designed for
cold honey filtering.
All components of
pressure filter such
as perforated filter,
coat, bottom, connectors) made of high
qualty acid-resistant
stainless steel as
standard.
There is a perforated filter inside the device; cylindershaped, with the cyllinder diameter of: 120 mm and
the length of 1000 mm. The diameter of filtration
slots: 1mm”
Honey gets pumped into the filter by the pump and
internal pressure is controlled by special sensor
that cuts the pump power supply off if the filter gets
blocked.
W365
Honey pressure
filter
W360
Honey filter
2 types of spanners provided – 1 for the filter and
the other one for in-out slots. 230 V/400V power
supply
FILTR_W360
Nylon filter to
honey filter (W360)
Wax melter, insulated
Designed for wax recovery from frames or drought using a
steam method. It consists of an exernal tank (for water) and the
frame or drought accomodating basket.
Way of using a filter
(the table is not a part
of the device).
To be purchased separately.
26
It is equpped with
insulated sides to
eliminate energy
loss.
It comes with
7,5kW gas stool
to heat the water
tank.
External
dimensions:
1165×1165×825 mm
Basket dimensions:
990×990×410 mm
Gas stove included
W4072_O
Stainless steel wax melter + free gas
stove
REDB
Gas pressure regulator for stainless steel
wax melter with gas stove.
27
All-in-one - Steam wax melter
combined with uncapping table
in one
Dough mixer,
stainless
2-year
warranty
W4074 device parameters:
»» Steam wax melter for frame Dadant,
using longitudinal adapter accommodates wax melter in frames: German
frame “DN”.
»» At the bottom: perforated sieve and
the drain
»» Length: 1000 mm,
»» Height: 400 mm, total height 835 mm
»» Width: 445 mm
»» Number of chambers: 1 piece
»» 400V power supply, power: 8kW
W4074
Steam wax
melter to wax
and uncapping
table in one,
1000 mm
Blender needs to be affixed to the ground
when in use. Capacity: 10 kg of dough.
Chamber and blending blades made of
stainless acid-resistant steel.
Power supply: 400V,
Power: 0,75 kW
W0133
Dough
mixer,
stainless
Honey creaming machine
with heated tank and bottom
Steam wax
melter to wax
and uncapping
table in one,
1500 mm
2-year
warranty
»» These devices are designed to perform
the process of honey creaming and decrystilization.
»» The appropriate design of the mixing propeller made of stainless steel allows for
accurate honey creming.
Creaming is the inoculation of liquid honey
by crystallized honey and honey crystals
abrasion at low speed.
Creaming process should take place in
repetitive cycles:
» Stirrer working - 15 min
» Stirrer standstill - 1 h
»» These devices are equipped with a thermostat to prevent honey from overheating.
Specifications:
»» Stainless steel: 0H18N9
»» Power supply: 400 V
»» Motor power: 4 kW
»» Tank inside diameter : 800 mm
»» Tank internal height :1220 mm
»» Sheet thickness inside the tank : 1.5 mm
»» Tank outside diameter: 900 mm
28
warranty
Designed for production
of honey-sugar dough.
When in use, the rotation
direction should be counterclockwise. The total
time of dough making
(approx. 40 min) depends
on the required consistency (longer grinding =
denser dough) .
W4074A
Steam wax melter - stainless steel - acid resistant, 0.8 mm thick.
The device is adapted to melt the wax and the uncapping frames.
Wax melter has a water tank, which is fed through a hose plugged
into the tank. The tank is equipped with a water level sensor that automatically opens or closes the flow of running water, depending on
its level. For hot water use it uses four heater, powered 2kW each.
2-year
W200890
Honey creaming
machine
»» capacity : 600 l,
»» with heated tank and
bottom
»» with automatic driver
»» power supply : 400V
»» Tank external height : 1290 mm
»» Sheet thickness outer tank: 1 mm
»» Total height: 1750 mm
»» Electronic temperature controller: 230V
»» Heater power: 1200 W
»» Swivel wheels with brakes: 4 pcs
»» Handles: 4 pcs
29
Warming cabinet
for one barrel 300kg
Beekeping Outfits
Clothing made of high qualty terylene and cotton
(65% of terylene, 35% of cotton)
Available sizes: from S to XXXL.
Easily washable. (after hat detachement it can be
washed at 90ºC) Available colours: white / beige
All pockets zip fastenable.
The warming cabinet is
a device used for honey
decrystallisation, that is for
changing the structure of
honey from a solid (crystallized) into liquid. It is
equipped with a heating
element and a fan, which
allows the better heat dissipation inside the cabinet.
The use of a temperature
controller protects honey
from overheating.
M6057
“Premium Line” beekeeper’s zip
top, with hat, available in white
or beige
2-year
Ventilation slots
under armpits
warranty
Size chart:
Welted sleeves,
thumb hole
Back mesh sewn
for easy ventilation
Size:
Height
(cm)
Chest
(cm)
Waist (cm)
S
M
L
XL
XXL
XXXL
164
170
176
182
188
196
90
96
104
112
120
128
78
86
94
102
110
118
Machine's parameters:
»» Power supply- 230V
/ 50Hz
»» Temperature
regulation between
30-55°C
»» heaters' power - 2 kW
»» External
cabinet dimensions:
1000×1200×1400 mm
»» Working
cabinet dimensions:
910×1155×1310 mm
W40780
Warming cabinet for one barrel 300kg
Warming (decrystalization)
cabinet
Every honey processing workshop needs an individual appoach for space management.
To make this easier we introduced new line of built-in,
very flexible in their form warming cabinets, that can
also double as honey storage cabinets.
Pricing depends on device size and chosen options.
Optimal decrystalization temperature is between 35
and 40°C. Honey must not be overheated during the
process or it will lose most of its’ properties (above
40°C).
Fresh honey is thick and clear. After some time it gets
naturally crystilized. Warming the crystalized honey
to 40°C for couple of days causes it to return to its
original state.
Electronic temperature controller with LCD display –
range of regulation between 30 and 55°C.
M6056
Beekeeper’s overall with hat:
„Premium Line” available in white
or beige
All pockets zip
fastenable.
W40782
Warming (decrystalization) cabinet
2-way zip
Ventilation slots
under armpits
Welted sleeves,
thumb hole
Zip legs (bottom)
for easy putting
on
30
M6040
Trousers “Premium Line”
31
Beekeeping Company
Przedsiębiorstwo Pszczelarskie
Tomasz Łysoń
Spółka z o.o. Spółka Komandytowa
Klecza Dolna 148, 34-124 Klecza Dolna
tel. +48 33 870-64-02, +48 33 875-93-24, +48 33 875-99-40, fax +48 33 844-75-21
email: lyson@lyson.com.pl
www.lyson.com.pl
www.facebook.com/pplyson
www.youtube.com/tomaszlyson

Automatic honey extracting line

Transcription

Similar documents

mariposa news - Mariposa Market

Automatic honey extracting line

HONEY BEE - CT Beekeepers Association

V.Smile: Winnie The Pooh The Honey Hunt

Honey Locust: Identification and Management

Sanitation Through Separation - Cisco

Supporting Nature-Based Enterprises at the Ntafufu, uMngazi and

Marvel Outdoor Mobile Beer Dispensers

DOC`S COUNTRY COOKING 10th Annual Ladonia Ranch Rodeo

Uncapping Lines - Paradise Honey

January 2012 - Massaro Community Farm