Full publication list - Universidad Nacional de Colombia : Sede

Transcription

Juan Pablo Hernández-Ortiz, Ph.D.
Full Professor
Department of Materials and Minerals
Calle 75 # 79A-51
Bloque M17
Facultad de Minas
Universidad Nacional de Colombia
Sede Medellı́n
Medellı́n, Colombia
Tel: +57 4 425-5249
Fax: +57 4 425-5254
E-mail: jphernandezo@unal.edu.co
E-mail: jphernandezo@wisc.edu
E-mail: jphernandezo@rcc.uchicago.edu
http://www.unalmed.edu.co/∼jphernandezo
Date of Birth: March 15, 1977
PROFESSIONAL
2013−present
Full Professor, Department of Materials and Minerals,
Universidad Nacional de Colombia, Sede Medellı́n, Colombia
(Youngest person to reach the Full Professor level at the University)
2008−2013
Associate Professor, Department of Materials and Bioengineering,
2010−2011
Visiting Scientist, Department of Chemistry-Genetics,
and Department of Chemical and Biological Engineering,
University of Wisconsin-Madison, United States
2007−2008
Assistant Professor, Department of Materials and Bioengineering,
1998−2000
Assistant Researcher, Energy and Thermodynamic Institute,
Universidad Pontificia Bolivariana, Medellı́n, Colombia
EDUCATION
2004−2007
Postdoctoral
Chemical and Biological Engineering
Advisors: Professors J. J. de Pablo and M. D. Graham
2000−2004
Ph.D.
Mechanical Engineering, minor in Chemical Engineering
Advisor: Professor T. A. Osswald
1994−1998
B.S.
Mechanical Engineering,
Universidad Pontificia Bolivariana (UPB), Medellı́n, Colombia
LANGUAGES
− Fluent:
Spanish and English
− Conversational:
Portuguese and German
Juan P. Hernández-Ortiz, Ph.D.
2/14
PROFESSIONAL SERVICES
2013
2013−present
2011−present
2009−present
2008−present
2011−2012
2012
2007−2012
2008−2010
Accreditation Reviewer Coordinator, Department of Mechanical Engineering,
Fundación Universitaria los Libertadores, Bogotá, Colombia
Editorial Board, Advances in Computational Chemistry
Hindawi Publishing Corporation, New York
Editorial Advisory Board, Journal of Polymer Engineering
Verlag Walter de Gruyter, Germany
Associate Editor, DYNA-Colombia, Facultad de Minas,
Universidad Nacional de Colombia, Medellı́n, Colombia
Editorial Board, Journal of Plastics Technology, WAK,
Carl-Hanser Verlag, Germany
Academic Chair, Department of Materials and Bioengineering,
Accreditation Reviewer, Department of Mechanical Engineering,
Universidad del Valle, Cali, Colombia
External Advisory Committee, Nanoscale Science and Engineering
Center (NSEC), University of Wisconsin-Madison, United States
Director, Material Characterization Laboratory,
AWARDS and HONORS
2013
2012
2012
2009−2013
2010
2005
2005
2005
2002
1999
1999
1998
1996
Honorary Associate Fellow, Biotechnology Center, Genomics Center of Wisconsin
Superior Performance, Department of Materials and Bioengineering,
2012 Distinction of Research and Teaching, Facultad de Minas,
Universidad Nacional de Colombia
Honorary Associate Fellow, Department of Chemical and Biological Engineering,
Superior Performance, Department of Materials and Bioengineering,
ENSINGER-Preis, Wissenschaftlichen Arbeitskreises Kunststofftechnik, Germany
(Best Ph.D. Thesis in the field of Polymer Engineering of centers associated with
the Polymer Technology Alliance (WAK))
QUADRANT Award, Quadrandt AG, Switzerland
(2nd Best Polymer and Composites Ph.D. Thesis in the world)
PLACON Award, Rheology Research Center,
(Best student talk for the year)
Doktorand, Forschung und Technologie. Fertigungstechnik, Daimler AG, Germany
(Daimler Ph.D. Student Fellowship)
Excellence Research Group Ranking, Energy and Thermodynamic Institute,
UPB, COLCIENCIAS, Colombia
Bolivarian Talent at the Scientific Area, UPB, Medellı́n, Colombia
Research Project of the Year, Ciencia y Tecnologı́a, Antioquia, Colombia
Excellence Research Group Ranking, Energy and Thermodynamic Institute,
UPB, COLCIENCIAS, Colombia
3/14
RESEARCH
My research group currently has 15 graduate students and more than 12 undergraduates. The projects
are mainly funded by COLCIENCIAS in three different modes: Co-funded with private institutions,
non-co-funded and through the Ph.D. program. There are several students that are funded by the
Universidad Nacional de Colombia Research Fund and the Faculty of Mines Ph.D. and M.Sc. tuition
grant.
Projects that are in collaboration with the University of Wisconsin-Madison and the University of
Chicago are funded by the National Science Foundation (NSF), the National Institute of Health
(NIH), the Department of Energy (DOE) and the Keck Foundation. These collaborations in the
USA support co-advised students and postdocts in Juan de Pablo and Dave Schwartz’ groups. They
primarily provide funding for travel expenses, conferences and monthly expenses when colombian
students visit US.
Research Projects
1. Project: Modelación del desgaste erosivo de alta temperatura en revestimientos de barrera
térmica (TBC) para máquinas térmicas de carga variable. FASE II: Aplicación de plasma,
diseño de polvos y mecanismos de erosión
(Modeling high temperature erosion of thermal barrier coatings for thermal devices in nonconstant operation conditions. FASE II: Air Plasma application, powder design and erosive
mechanism).
Funded by: Empresas Públicas de Medellı́n (EPM): $1,000,000 for 3 years.
Involvement: co-PI with Professor Alejandro Toro.
Students: 1 Ph.D. student, 2 Master students and 5 undergraduate students.
Years: 2013 to 2016.
2. Project: New Physical Methodologies for Genomic Analysis
Funded by: The National Institute of Health (US): $1,500,000 for 3 years
Funded by: Universidad Nacional de Colombia: $20,000
Involvement: co-PI in collaboration with Professor David C. Schwartz (UW-Madison).
Students: 1 Ph.D. student and 1 Master student in Colombia.
Years: 2012 to 2015.
3. Project: The Genome Assembler
Funded by: The Keck Foundation (US): $1,000,000
Funded by: Universidad Nacional de Colombia: $20,000
Involvement: co-PI in collaboration with Professor David C. Schwartz (UW-Madison).
Students: 1 Master student in Colombia.
Years: 2012 to 2015.
4. Project: Hierarchical driven-assembly of nano-confined nematics
Funded by: Universidad Nacional de Colombia Ph.D. grant and Faculty of Mines M.Sc.
tuition grant: $150,000 for 4 years
Involvement: PI (Colombia) and co-PI (US).
Students: 1 Ph.D. student and 1 Master student in Colombia.
Years: 2012 to 2016.
Comments: This project is part of a collaboration with Professor Juan de Pablo in the
Institute for Molecular Engineering at the University of Chicago. The US funding comes from
NSF and DOE.
4/14
5. Project: Design and fabrication of light-weight composites through direct molding for ballistic
applications
Funded by: Colciencias - National Ph.D. program: $100,000 for 4 years.
Involvement: PI.
Students: 1 Ph.D. student and 3 undergraduate students.
Years: 2012 to 2016.
Comments: This project is being presented for additional funding of $750,000 for 4 years
to Colciencias, Colombian companies and the Colombian Army. In addition, it embraces the
R and Light Soldier.
R
concepts of Soldier Comfort
6. Project: Collective motion, chemotaxis and signaling in colonies of self-propelled organisms
Funded by: Universidad Nacional de Colombia, Sede Medellı́n: $20,000.
Involvement: PI.
Students: 1 Ph.D. student and 1 undergraduate student.
Years: 2010 to 2014.
Comments: This project is being presented for additional funding of $500,000 for 4 years to
Colombian mining companies to extend the study to bio-leaching mechanisms of bacteria
for gold recovery in mining tails.
7. Project: Modelación y Simulación del proceso de espumado en termofijos y elastómeros
(Modeling and Simulation of thermosetting and elastomeric foaming processes)
Funded by: Colciencias - Extrusiones S.A.: $300,000 for 3 years.
Involvement: PI.
Students: 1 Ph.D. student and 2 undergraduate students.
Years: 2009 to 2012.
8. Project: Mechanism of proton transfer in polymeric membranes and catalytic surface reactions
Involvement: PI.
Students: 2 Ph.D. students.
Years: 2007 to 2011.
9. Project: Modelación del desgaste erosivo de alta temperatura en revestimientos de barrera
térmica (TBC) para máquinas térmicas de carga variable
(Modeling high temperature erosion of thermal barrier coatings for thermal devices in nonconstant operation conditions).
Funded by: Colciencias - Empresas Públicas de Medellı́n (EPM): $850,000 for 3 years.
Involvement: co-PI with Professor Alejandro Toro.
Students: 1 Master student and 3 undergraduate students.
Years: 2008 to 2011.
10. Project: Método para la simulación de macro-iones suspendidos en un solvente iónico continuo: Nernst-Planck-GGEM
(Method to simulate suspended macro-ions in an ionic continumm solvent).
Funded by: The Research Division, Universidad Nacional de Colombia, Sede Medellı́n: $15,000.
Involvement: PI, new faculty start-up project (computational resources)
Year: 2008.
5/14
11. Project: Desarrollo mediante la técnica UV-LIGA de un Micro-actuador ETM con potencial
aplicación en sistemas de conmutación óptica.
(Design and fabrication of ETM micro-actuator for optical commutation by UV-LIGA).
Involvement: PI.
Students: 2 undergraduate graduation projects.
Year: 2009.
12. Project: Fabricación de micro-piezas por UV-Liga
(Fabrication of micro-devices by UV-LIGA).
Involvement: PI.
Students: 2 undergraduate graduation projects.
Year: 2008.
Submitted proposals for additional funding and non-funded projects
1. Project: Design and fabrication of light-weight composites through direct molding for ballistic
applications.
In preparation to: Colciencias co-funded by ThoR S.A. and TermalTec S.A.: $ 750,000
Supported by: The Colombian Army, Navy and the Secretary of Defense.
Current students: 1 Ph.D. student and 3 undergraduate graduation projects.
Year: 2013-14
2. Project: Bio-leaching mechanisms of bacteria for gold recovery in mining tails.
In preparation to: Colciencias co-funded by Mineros de Antioquia: $ 500,000
Current students: 1 Ph.D. student and 1 undergraduate graduation project.
Year: 2013-14
3. Project: Modeling the immune response in organ and islet transplantation.
In preparation to: Ruta N - Regalias Antioquia: $ 500,000
Collaboration: M.D. Luis Fernandez, Department of Surgery at the University of WisconsinMadison.
Current students: 2 undergraduate graduation project.
Year: 2013-14
4. Project: 4D flow from MRI: predicting rheological and mechanical properties in patients with
pulmonary hypertension.
In preparation to: CediMed - Ruta N - Regalias Antioquia: $ 500,000
Collaboration: M.D. Ph.D. Christopher J. Francois, Department of Radiology at the University of Wisconsin-Madison.
Current students: 2 undergraduate graduation project.
Year: 2013-14
5. Project: Multiple Myeloma characterization by means of genome analysis: NanoGenomics.
In preparation to: Ruta N - Regalias Antioquia: $ 1,000,000
Collaboration: Professor Dave Schwartz, Department of Chemistry, University of WisconsinMadison.
Year: 2013-14
6. Project: Rheology of polymeric films through pattern leveling.
In preparation to: Colciencias and the National Science Foundation (US): $ 250,000
Possible collaboration: Professor Paul Nealey, Institute for Molecular Engineering at the
University of Chicago.
Current students: 3 undergraduate graduation projects.
Year: 2013-14
6/14
Figure 1: Research Group December 2012.
GRADUATE STUDENTS
Name
Degree
Graduation Comments
1. Julian D. Osorio R.
M.Sc. Material Science
Feb-2012
Laureate Thesis
Propiedades de Transporte en Recubrimientos Cerámicos Utilizados en
Turbinas a Gas. (Transport Properties in Thermal Barrier Coatings used
in Gas Turbines.)
2. Ana M. Gómez-Marı́n
Ph.D Chemical Engineering
Dec-2013
Laureate Thesis
Structure and Charge Transfer Processes at the Pt(111)/Solid Polymer
Electrolyte Interface: A Mesoscopic Approach.
Jarol E. Molina
Ph.D. Chemical Engineering
2013
finishing
Nora Catalina Restrepo
Ph.D. Material Science
2013
finishing
Alejandro Vasquez
M.Sc. Mathematics
2013
in process
Liliam Cristina Agudelo
2014
in process
Anderson Valencia
2014
in process
Viviana Palacio Betancur
2014
in process
Orlando Barrios
2014
in process
Fabio A. Suarez
2015-16
in process
Stiven Villada
2015-16
in process
Juan Fernando Montoya
2015-16
in process
Juan David Ospina Correa Ph.D. Material Science
2017-18
starting
Susana Calle
2016
starting
Daniel Alejandro Olaya
2017
starting (Jan 2014)
Paula Andrea Piedradita
2017
starting (Jan 2014)
Diego Alerto Patiño
Ph.D. System Engineering
2019
starting (Jan 2014)
7/14
RESEARCH INTERESTS
−
−
−
−
−
−
Computational Immunology: Epitopes to organ transplantation
Physiology of body fluids: Blood and Lymph
Non-equilibrium thermodynamics in biology and complex fluids
Nanoscale engineering for biotechnological applications
Driven-assembly and material design with complex fluids
Self-repairing and advanced ballistic materials
−
−
−
−
−
Biophysics, Biology and Physiology
Statistical thermodynamics and transport phenomena
Polymer and non-condensed matter physics
Non-linear mathematics and stochastic calculus
Numerical methods, modeling and simulation
COURSES
− Courses at the Universidad Nacional de Colombia:
Title
Material Science
Statistical Thermodynamics
Inter. Transport Phenomena
Type
Undergraduate
Graduate
Graduate
Average
Students
60 Students
15 Students
15 Students
Average Student
Evaluation
4.6/5.0
4.75/5.0
4.5/5.0
− New Courses and courses in preparation:
Title
Physics of Complex Fluids
Advanced Mathematics for Engineers
Computational Immunology
2014
2014
2015
Type
Graduate
Graduate
Graduate
PUBLISHED PUBLICATIONS
Web of Science SM (December 2013)
Times cited:
474
Citing articles:
352
Average Citations per Item:
13.94
h-index:
11
1. Modelling and simulation of transient wood combustion processes, Renew.
15-16, pp 1992 (1998), with F. Chejne and W. F. Florez (2nd author)
Energy, vol.
2. Modeling and simulation of time-dependent coal combustion processes in stacks, FUEL, vol.
79, pp. 987 (2000), with F. Chejne, W. Flórez and A. F. Hill (1st author) [DOI: 10.1016/S00162361(99)00224-0]
3. Modeling and simulation of coal gasification process in fluidized bed, FUEL, vol. 81, pp. 1687
(2002), with F. Chejne (co-author) [DOI: 10.1016/S0016-2361(02)00036-4]
4. Analysis of fiber damage mechanisms during processing of reinforced polymer melts, Eng.
Anal. Boundary Elements, vol. 26, pp. 621 (2002), with T. Raush, A. Rios, S. Strauss and
T. A. Osswald (1st author) [DOI: 10.1016/S0955-7997(02)00018-8]
8/14
5. Theoretical model for heat transfer in the single crystal making, Revista Facultad de Ingenierı́a - U. de A., vol. 26, pp. 79 (2003), with F. Chejne, W. Flórez, and T. Ragimova
(director author)
6. Simulation of viscous 2D-planar cylindrical geometry deformation using DR-BEM, Int. J.
Num. Meth. Heat Fluid Flow, vol. 13, pp. 698 (2003), with T. A. Osswald and D. A. Weiss
(1st author) [DOI: 10.1108/09615530310498385]
7. Theoretical analysis of fiber motion and loads during flow, Polym. Composites, vol. 25,
pp. 1 (2004), with T. Raush, A. Rios, S. Strauss and T. A. Osswald (1st author) [DOI:
10.1002/pc.20000]
8. A novel cure reaction model fitting technique based on DSC scans, J. Poly. Eng., vol. 25, pp.
23 (2004), with T. A. Osswald (1st author)
9. Transport and collective dynamics in suspensions of confined swimming particles, Phys. Rev.
Lett., vol. 95, pp. 204501 (2005), with C. Stoltz and M. D. Graham (1st author) [DOI:
10.1103/PhysRevLett.95.204501]
10. N log N Fourier based method for hydrodynamic interactions in confined polymer solutions,
J. Chem. Phys., vol. 125, pp. 164906 (2006), with J. J. de Pablo and M. D. Graham (1st
author) [DOI: 10.1063/1.2358344 ]
11. Cross-stream-line migration in confined flowing polymer solutions: Theory and simulation,
Phys. Fluids, vol. 18, pp. 123101 (2006), with H. Ma, J. J. de Pablo and M. D. Graham (1st
author) [DOI: 10.1063/1.2397571]
12. Modeling the vulcanization of silicone rubber, Polym. Eng. Sci., vol. 47, pp. 675 (2007), with
L. M. Lopez, A. B. Cosgrove and T. A. Osswald (co-director author) [DOI: 10.1002/pen.20698]
13. Mechanism of fiber-matrix separation in ribbed compression molded parts, Polym. Composites, vol. 28, pp. 451 (2007), with A. Londoño-Hurtado and T. A. Osswald (2nd author) [DOI:
10.1002/pc.20295]
14. Fast computation of many-particle hydrodynamic and electrostatic interactions in a confined
geometry, Phys. Rev. Lett., vol. 98, pp. 140602 (2007), with J. J. de Pablo and M.D.
Graham (1st author) [DOI: 10.1103/PhysRevLett.98.140602]
15. Diffusion and spatial correlations in suspensions of swimming particles, Phys. Rev. Lett., vol.
100, pp. 248101 (2008), with P. Underhill and M.D. Graham (2nd author) [DOI: 10.1103/PhysRevLett.100.248101]
16. Diffusion and spatial correlations in suspensions of swimming particles, Virtual J. Biological
Physics Research, vol. 16(1), July 1st (2008), with P. Underhill and M.D. Graham (2nd
author)
17. Dipole-induced self-assembly of helical β-peptides, J. Chem. Phys., vol. 129, pp. 015102
(2008), with C. A. Miller, N. L. Abbott, S. H. Gellman and J. J. de Pablo (2nd author) [DOI:
10.1063/1.2928700]
18. Dipole-induced self-assembly of helical β-peptides, Virtual J. Biological Physics Research,
vol. 16(2), July 15th (2008), with C. A. Miller, N. L. Abbott, S. H. Gellman and J. J. de Pablo
(2nd author)
19. Concentration distributions during flow of confined flowing polymer solutions at finite concentration: slit and grooved channel, Korea-Australia Rheology Journal, vol. 20, pp. 143
(2008), with H. Ma, J. J. de Pablo and M. D. Graham (1st author)
20. Liquid crystal relaxation in three dimensions: The effect of hydrodynamic interactions, DYNAColombia, vol. 75, pp. 185 (2008), with B. T. Gettelfinger, F. R. Hung, O. Guzmán, A. D. Rey,
N. L. Abbott and J. J. de Pablo (co-director author)
9/14
21. Dynamics of confined suspensions of swimming particles, J. Phys. Condensed Matter, vol.
21, pp. 204107 (2009), with P. Underhill and M. D. Graham (1st author) [DOI: 10.1088/09538984/21/20/204107]
22. Hydrodynamic effects on the translocation rate of a polymer through a pore, J. Chem. Phys.,
vol. 131, pp. 044904 (2009), with M. Chopra, S. Geier and J. J. de Pablo (1st author) [DOI:
10.1063/1.3184798]
23. Flow induced deformation of defects around nanoparticles and nanodroplets suspended in liquid
crystals, Soft-Matter, vol. 6(5), pp. 896 (2010), with B. T. Gettelfinger, J. A. Moreno-Razo,
G. M. Koenig Jr., N. L. Abbott and J. J. de Pablo (co-director author) [DOI: 10.1039/b912551e]
24. Pair collisions of fluid-filled elastic capsules in shear flow: effects of membrane properties and
polymer additives, Phys. Fluids, vol. 22, pp. 123103 (2010), with P. Pranay, S. G. Anekal
and M. D. Graham (co-director author) [DOI: 10.1063/1.3524531]
25. Pair collisions of fluid-filled elastic capsules in shear flow: effects of membrane properties and
polymer additives, Virtual J. Biological Physics Research, vol. 20(12) December 15 (2010),
with P. Pranay, S. G. Anekal and M. D. Graham (co-director author)
26. Nanoscale science: a path for understanding nature, DYNA-Colombia, Editorial, vol. 163
(2011)
27. Modeling processing of silicone rubber: liquid versus hard silicone rubber, J. Applied Polym.
Sci., vol. 119, pp. 1864 (2011), with T. A. Osswald (co-author) [DOI: 10.1002/app.31995]
28. Numerical prediction of fiber orientation in fiber-reinforced composites, J. Reinforced Plast.
Comp. vol. 30(9), pp. 781 (2011), with A. Londoño-Hurtado and T. A. Osswald (co-director
author) [DOI: 10.1177/0731684411400227]
29. Modeling flows of confined nematic liquid crystals, J. Chem. Phys., vol. 134, pp. 134905
(2011), with B. T. Gettelfinger, J. Moreno-Razo and J. J. de Pablo (1st author) [DOI: 10.1063/
1.3567098]
30. Numerische Bestimmung der Durchgangsrate von Partikeln durch eine Porengeometrie, Chemie
Ingenieur Technik, vol. 83(6), pp. 900 (2011), with S. Geier and J. J. de Pablo (co-director
author) [DOI: 10.1002/cite.201000218]
31. Liquid crystal nanodroplets, and the balance between bulk and interfacial interactions, Soft
Matter, vol. 8(5), pp. 1443-1450 (2012), with S.I. Hernández, J. A. Moreno-Razo, A. Ramı́rezHernández, E. Dı́az-Herrera and J. J. de Pablo (co-director author) [DOI: 10.1039/c1sm06425h]
32. Liquid crystal mediated interactions between nanoparticles in a nematic phase, Langmuir, vol.
28(14), pp. 6124-6131 (2012), with V. Tomar, T. F. Roberts and J. J. de Pablo (co-director
author) [DOI: 10.1021/la204119p]
33. Liquid Crystal Mediated Self Assembly at Nanodroplet Interfaces, Nature, vol. 485(7396),
pp. 86-89 (2012), with J. A. Moreno-Razo, E. J. Sambriski, N. L. Abbott and J. J. de Pablo
(co-director author) [DOI: 10.1038/nature11084]
34. Morphological Transitions in Liquid Crystal Nanodroplets, Soft Matter, vol. 8(33), pp. 86798689 (2012), with V. Tomar, S. I. Hernández and J. J. de Pablo (co-director author) [DOI:
10.1039/ c2sm25383f]
35. Cinética de curado de un caucho EPDM y una resina epóxica alifática − modelamiento y análisis
sin y con difusión, Revista Iberoamericana de Polı́meros, vol. 13(5), pp. 245 (2012), with
N.C. Restrepo and T.A. Osswald (senior author)
36. A Novel Approach Towards Electrokinetic Phenomena in Soft Matter, DYNA-Colombia, vol.
79(175E), pp. 105-113 (2012)
10/14
37. Thermal barrier coatings for gas turbine applications: failure mechanisms and key microstructural features, DYNA-Colombia, vol. 79(176), pp. 149-158 (2012), with J. D. Osorio and
A. Toro (senior author)
38. Mean field approximation of Langmuir-Hinshelwood CO-surface reactions considering lateral
interactions, J. Phys. Chem. C, vol. 117(30), pp. 15716-15727 (2013), with A. M. GómezMarı́n (senior author) [DOI: 10.1021/jp404711p]
39. Presentation of large DNA molecules for analysis as nanoconfined dumbbells, Macromolecules,
vol. 46(20), pp. 8356-8368 (2013), with K. L. Kounovsky-Shafer, K. Jo, J. J. de Pablo, T. Odijk
and D. C. Schwartz (co-senior author) [DOI: 10.1021/ma400926h]
40. Correlations between microstructure and mechanical properties of air plasma-sprayed thermal
barrier coatings exposed to high temperature, J. American Ceramic Soc., vol. 96(12), pp.
39013907 (2013), with J. D. Osorio, M. Maya, A.C. Barrios, A. Lopera, F. Jimenez, J.M. Meza
and A. Toro (co-senior author) [DOI: 10.1111/jace.12621]
41. Microstructure of thermal barrier coating systems after exposure to high temperatures, Ceramics International, vol. 40(3), pp. 4663-4671 (2014), with J. D. Osorio and A. Toro
(co-senior author) [DOI: 10.1016/j.ceramint.2013.09.007]
42. Ion Effects at Electrode/Solid Polymer Electrolyte Membrane Interfaces, Physical Chemistry
Chemical Physics, vol. 16(5), pp. 1945-1956 (2014), with A. M. Gómez-Marı́n (senior author)
[DOI: 10.1039/c3cp54173h]
43. Effect of Poly(ethylene oxide) Homopolymer and Two Different Poly(ethylene oxide-b-poly(propylene
oxide)-b- poly(ethylene oxide) Triblock Copolymers on Morphological, Optical, and Mechanical
Properties of Nanostructured Unsaturated Polyester, ACS Applied Materials & Interfaces,
vol. 6(2), pp. 1073-1081 (2014), with D. Builes, A. Corcuera, I. Mondragon and A. Tercjak
(co-author) [DOI: 10.1021/am4046266]
44. Langmuir-Hinshelwood mechanism including lateral interactions and species diffusion for CO
oxidation on metallic surfaces, J. Phys. Chem. C, in publication process (2014), with with
A. M. Gómez-Marı́n (senior author) [DOI: 10.1021/jp409385k]s
45. Methodology for generation of Time-temperature-transformation (TTT)-diagram: Aliphatic
Epoxy Resin, J. App. Poly. Sci., in publication process (2014), with N. C. Restrepo (senior
author)
46. Phase transformations in air plasma sprayed Yttria-stabilized Zirconia thermal barrier coatings,
DYNA-Colombia, in publication process (2014), with J. D. Osorio, A. Lopera and A. Toro
(senior author)
47. Diffusion-reaction of aluminum and oxygen in Al2 O3 thermally oxide grown layers, Heat &
Mass Transfer, in publication process (2013-2014), with J. D. Osorio, J. Giraldo, J. C. Hernández
and A. Toro (senior author) [DOI: 10.1007/s00231-013-1249-1]
SUBMITTED PUBLICATIONS 2013
1. Numerical simulation to assess the elastic-strain energy distribution of a silicon rubber subjected
to a punch shear test, to DYNA-Colombia, with A. Lopera-Valle and F.A. Suárez-Bustamante
(senior author)
2. Theoretical Voltammetric Response of Electrodes Coated by Solid Polymer Electrolyte Membranes, to Analytical Chimica Acta, with A. M. Gómez-Marı́n (senior author)
3. Armour ballistic assessment from tensile information: basic principle modeling, to J. Impact.
Eng., with F.A. Suárez-Bustamante (senior author)
11/14
PUBLICATIONS IN PROCESS
1. Electrostatic Confinement and Manipulation of DNA Molecules for Genome Analysis, to Nat.
Biotech., with K. L. Kounovsky-Shafer, K. Jo, J. J. de Pablo, T. Odijk and D. C. Schwartz
(co-senior author), submission process
2. Towards the Colombian Light Soldier Concept, to Military Medicine, with N. Rozo-López, G.D.
Marı́n-Velásquez and F.A. Suárez-Bustamante (senior author), submission process
3. Bipolar, twisted-bipolar, hyper-twisted-bipolar and van Gogh mesophases in chiral liquid crystal
nanodroplets, to Phys. Rev. Lett., with N. Martinez-Vara, J. A. Moreno-Razo, S.I. Hernáandez,
E. Dı́az-Herrera and J. J. de Pablo (co-senior author), collapsing final results
4. Confined polyelectrolites with continuum solvent and ions: General Geometry Ewald-like method
and Nernst-Planck (NP-GGEM), to J. Theo. Comp. Chem., with J. Molina (director author),
collapsing final results
5. Theoretically coarse-grain informed Monte Carlo method to study confined liquid crystals, to
J. Chem. Phys., with J. J. de Pablo and O. Guzmán (co-author), collapsing final results
6. Global and local/quadrature RBF method in 3D: extraction of thermodynamic information
from free energy functionals, to SIAM J. Appl. Math, with V. Palacio and S. Villada (senior
author), collapsing final results
7. Glass transition and viscosity prediction of thin polymeric films from a leveling experiment, to
J. Chem. Phys. with A. Martiliano-Martinez, H. A. Castaño-Osorio, D. A. Olaya-Muñoz and
P. Nealey (senior author), collapsing final results
8. Behavior and phases of molecular systems with chiral interactions, to Soft Matter, with N.
Martinez-Vara, J. A. Moreno-Razo, S.I. Hernández, E. Dı́az-Herrera and J. J. de Pablo (cosenior author), obtaining results
9. G’ and G” of thin polymeric films during leveling, to J. Rheol., with A. Martiliano-Martinez,
H. A. Castaño-Osorio, D. A. Olaya-Muñoz and P. Nealey (senior author), obtaining results
10. Surface ordering in nano-drops containing nematic liquid crystals, to Soft Matter, with J. J. de
Pablo (co-author)
11. Parking and loading of polyelectrolytes at low ionic strength, to Phys. Rev. Lett., with
K. L. Kounovsky-Shafer and D. C. Schwartz (1st author)
12. Modeling elastomeric and thermoset foams: kinetics, heat and nucleation, to Poly. Eng. Sci.,
with N. C. Restrepo (director author)
13. Dimensional analysis for the ballistic protection mechanism in ceramic-polymer composites, to
WEAR, Ceramics Int. or Polym. Comp, with F. A. Suarez (director autor)
14. An O(N ) Green’s function method to calculate hydrodynamic interactions of particles in unbounded and confined geometries: Stokesian-Dynamics-GGEM, to J. Fluid. Mech or J. Rheology, with M. D. Graham (co-author)
BOOKS and BOOK CHAPTERS
1. Boundary Integral Equations for Viscous Flows: non-Newtonian Behavior and Solid Inclusions,
Ph.D. Dissertation, Department of Mechanical Engineering, University of Wisconsin-Madison,
2004.
2. Polymer Processing − Modeling and Simulation, Hanser Publishers, Munich, 2006, with T. A. Osswald [ISBN-10: 1569903980]
12/14
3. Continuous Equipment Simulation − Mixing Devices, with A. Londoño-Hurtado and T.A.
Osswald in Mixing and Compounding of Polymers, Ed. by I. Manas-Zloczower, 2nd Edition,
Hanser Publishers, Munich, 2009 [ISBN-10: 1569904243]
4. KUNSTSTOFFVERARBEITUNG − Modellierung und Simulation, Hanser Publishers, Munich, in process 2013-2014, with T. Tsigkopoulos and T. A. Osswald
5. Procesamiento de Polı́meros − Modelación y Simulación, Editorial Guaduales, Cucutá, Colombia, in process 2013-2014, with I. D. Lopéz and T. A. Osswald
INVITATIONS and LECTURES
2013
2013
2013
2013
2013
2013
2013
2012
2011
2011
2011
2010
2010
2010
2009
2009
2009
2009
2008
2006
2002−2005
2004
2004
2003
Invited Speaker, Feria Ingeniar 2013, Universidad Pontificia Bolivariana
Visiting Scholar, Department of Surgery, Division of Transplantation,
Dr. Luis Fernandez, University of Wisconsin-Madison
Visiting Scholar, Department of Radiology,
Dr. Christopher J. Francois, University of Wisconsin-Madison
Invited Speaker, 25th International Conference of Science and Technology of
Complex Fluids, Puebla, Mexico
Invited Professor, School of Science and Engineering Materials,
Universidad Autonoma de Mexico, Mexico DF
Speaker, Gordon Research Conferences, Physics and Chemistry of
Microfluidics Conference, Lucca, Italy
AiChE - Medellı́n, Inauguration Lecture, Universidad Nacional de Colombia, Medellı́n
Invited Professor, School of Science and Engineering Materials,
Universidad Autonoma de Mexico, Mexico DF
Session Chair, Society of Rheology 83rd Annual Meeting,
Cleveland, OH, United States
Keynote, Research Week, Universidad Nacional de Colombia, Medellı́n
Rheology Research Center Seminar, University of Wisconsin-Madison,
United States
International Silicone Conference, Cleveland, OH, United States
26th Engelberger Kunststofftechnisches, Engelberg, Switzerland
SFB 694 Lecture, University of Erlangen-Nuremberg, Germany
Short Course, Society of Rheology 81st Annual Meeting,
Madison, WI, United States
Workshop Flowing Complex Fluids, University of Minnesota,
Minneapolis, MN, United States
AiChE South-American Lecture, Universidad los Andes, Bogotá, Colombia
SFB 694 Lecture, University of Erlangen-Nuremberg, Germany
Keynote, Colloquium ICIPC 15 años, EAFIT, Medellı́n, Colombia
Invited Teaching Assistant, Technical University of Denmark, Copenhagen
Invited Lecturer with Professor T. A. Osswald,
University of Erlangen-Nuremberg, Germany
United States
Invited Lecturer, Universidad EAFIT, Medellı́n, Colombia
United States
13/14
Other PROFESSIONAL SERVICES
− Ph.D. Committee: Department of Chemistry − University of Wisconsin-Madison; Department
of Chemical Engineering, Department of Mechanical Engineering, Department of Mathematics −
Universidad Nacional de Colombia, Sede Medellı́n.
− Proposal Reviewer: National Science Foundation, Colciencias, Universidad Nacional de Colombia and other Colombian universities
− Reviewer: Journal of Applied Polymer Science, Physical Review Letters, Physical Review E,
Journal of Fluid Mechanics, Journal of non-Newtonian Fluid Mechanics, Journal of Rheology, Experimental Mechanics, Polymer Composites, Journal of Chemical Physics, Analyst, Nucleic Acids
Research, New Journal of Physics, Applied Mathematics and Mechanics, Journal of the Royal Society Interface, Physics of Fluids, Heat and Mass Transfer and 10 other Colombian journals.
− Scientific Advisory Board: Simtec Silicone Parts, TermalTec S.A., Ingema S.A.S., ThoR S.A.,
and MEGA Solution Group
CONSULTING
I have performed consulting and advising to companies and institutions in aspects of materials science,
energy management and research strategies: Gobernación de Antioquia, Beneficiencia de Antioquia,
IDEA, Colombian Armed Forces, Simtec Silicone Parts, Zenu S.A., Noel S.A., C.I. TermalTec S.A.,
DevATecH S.A.S., Ingema S.A.S., ThoR, Plásticos Jordao, Amplax, Ingema, Sopesa, Ethus Group,
Electricas de Medellı́n, Celsa S.A., Empresas Públicas de Medellı́n, IngePol S.A.
MEMBERSHIPS and ASSOCIATIONS
American Physical Society (APS):
− Division of Fluid Dynamics (DFD)
− Division of Polymer Physics (DPOPY)
− Division of Biological Physics (DBIO)
− Division of Condensed Matter Physics (DCMP)
− Division of Computational Physics (DCOMP)
American Institute of Chemical Engineers (AiChE)
The Society of Rheology (SOR)
14/14
REFERENCES
Juan J. de Pablo
Liew Family Professor of Molecular Theory and Simulation
Institute for Molecular Engineering
University of Chicago
5747 South Ellis Avenue, JONES 216
Chicago, IL 60637
Tel: +1-773-702-7791
Email: depablo@uchicago.edu
Tim A. Osswald (Ph.D. Thesis advisor)
K.K. and Cindy Wang Professor
Department of Mechanical Engineering,
University of Wisconsin-Madison,
1513 University Avenue,
Madison, Wisconsin, 53706-172
Tel: +1-608-263-9538
Fax: +1-608-265-2316
Email: osswald@engr.wisc.edu
David C. Schwartz
Professor of Chemistry and Genetics,
University of Wisconsin-Madison,
Laboratory for Molecular and Computational Genomics,
425 Henry Mall,
Madison, Wisconsin, 53706-1691
Tel: +1-608-265-0546
Email: dcschwartz@wisc.edu
Paul F. Nealey
Brady W Dougan Family Professor in Molecular Engineering
Institute for Molecular Engineering
University of Chicago
5747 South Ellis Avenue, Jones 217
Chicago, IL 60637
Tel: +1-773-702-9143
Email: nealey@uchicago.edu
January 22, 2014. Medellı́n, Colombia.

Full publication list - Universidad Nacional de Colombia : Sede

Transcription

Similar documents

to find more detailed information on the partners working on this

Diapositiva 1

ACTIONS FOR A BETTER COUNTRY Our Communications Strategy

IEEE SB Chapter Electron Devices Universidad de San

Diapositiva 1

En tiempos de convergencia (In Times of Convergence

Parque Nacional Natural Cueva de Los Guacharos

Classifieds: 607-4497

pharmacy - Cooper

Colombia ® Challenge your Knowledge