Company Profile - INFO

Transcription

Infotrax Engineering
Company Registration No: 723031-W
_________________________________________________________________________________________________________________________________________________________________
Company Profile
INFOTRAX ENGINEERING SDN BHD
1.
2.
3.
4.
5.
Dimensional Control Survey
3-D Laser Scan
Engineering Services
Vibration Monitoring
Process Control & Monitoring System
No. 1-3-3A, Blok 1, City Garden Commercial Centre
Taman Mirwana, 68000 Ampang, Selangor Darul Ehsan
Tel: +603 4270 2447 Fax: +603 42702616
Email: info@infotraxeng.com Website: www.infotraxeng.com
_________________________________________________________________________________________________________________________________________________________________
Company Background
Info-Trax Sdn Bhd (ITSB) is a licensed company with PETRONAS was incorporated in 1991.
ITSB has been awarded an umbrella contract (Master Price and Service Agreement) by
PETRONAS Carigali in the area of Laser Scanning and Dimensional Control Survey on 2013.
Working closely with its own Associate Company Infotrax Engineering (M) Sdn Bhd who is
leader and specialist in Accuracy Control, Electronic Survey and Measurement we believe this
revolutionary technique, would be able to help and complement oil & gas producer to
tremendously reduce the time and money due to unplanned and unscheduled shutdown.
As a company with the focus in the Dimensional Control& Engineering Services, ITSB is
desired to render it services to Malaysian Oil & Gas company in the area of Dimensional
Control Survey & Engineering Services. The services that we could provide starting from Laser
Point & Laser Scan Survey until the production of the fabrication drawing and finally the as built
drawing.
The provision of 3D CAD models of millimetric accuracy of existing and replacement equipment,
utilizing electronic laser data capture methods became the enabler for innovation and
subsequent major cost & program savings on both new build and brown-field modification
projects.
With this major step forward in technology, ITSB has established a leading position in Malaysia.
Complete Dimensional Survey Service
ITSB and its partner have more than 100 surveyors who are highly experienced in all
aspects of new build projects and modifications to fixed platforms and FPSOs. All the survey
personnel are equipped with the latest electronic survey instruments and software enabling
them to deliver quality results on every project.
They are fully conversant in both 2D and 3D drafting to complement their reports and
deliverables. Major operators and engineering and construction companies contract us
worldwide on both minor and major projects.
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
Engineering Services
Our engineering divisions fully complement each other when clients specify a complete
engineering package as the final deliverable.
Our engineers and designers are experienced in brown-field modification projects and are
conversant with most mainstream design software systems.
We also provide in-house training such as modeling, spec creation, piping & support design,
shop drawing production which utilizing the most recent engineering software used (e.g
PDMS, Cyclone, AutoCAD, SP3D) to ensure good quality of our people when we place them
in client organization. We provide the support to our staff whenever required in performing
the duties at the client site.
In house training
Detail Design Work
Engineering Department
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
Organizational Chart
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
What is Laser Scanning?
Objective: To provide a fast, accurate, cost effective solution to obtaining 3D ‘as-built models
of your facilities, in the format of your choice. (AutoCAD, Micro Station, PDS, PDMS)
1. Site visit to capture real data in the
onshore or offshore environment.
2. 360 degree scans of 5000 points per
second enable extremely rapid data
collection.
3. Construction of model elements in 3D
environment.
4. Fully rendered model for design, clash
checking, visualization and
communication.
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
Dimensional Control Survey – How does it work?
Objective: First Time Fit, Clash Free Installation, Zero On-Site welding.
1. Customer supplied design sketch or similar drawings
2. Site Survey to establish as-built coordinate of tie-ins and proposed routing corridor
(Rapid capture of pertinent data to + 1mm)
3. Actual as-built surveyed data
automatically imported into CAD model
space.
4. Actual Tie-in point positions and
deviations Computed automatically from
Infotrax ScanMaster Software.
5. Details of tie-in-flange deviation
geometry are automatically transferred
to the fabrication isometric.
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
6. Customer’s design sketch route centre-line
incorporated into 3D model and adjusted to fit
between tie-in points.
7. 3D pipe components and equipment
items added to the adjusted design centre-line.
9. As-built corridor model exported to
visualization and clash detection software
10. Design model of the new pipe-work
imported to the as-built corridor model and
clash check performed.
11. Clashes detected reported and resolved
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
12. Construction review to ensure
practicality / ease of installing spools and
equipment.
13. Semi-automatic Fabrication Isometric
Generation.
14. Fabrication conformance verification
surveys to international standard
tolerances.
15. First Time Fit of New Design. Zero
rework. Zero growth. Zero risk.
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
Examples of Dimensional Control Project
Module support frame installation. As-build of new
module support frame overlay with offshore laser and
clash report produced.
Piping modifications on fixed platform. All the
interconnecting pipework was surveyed and
fabricated prior to the installation of the topside
modules, these spools were loaded out inside the
modules. Once the modules were installed the
spools were lifted into position and bolted. Major
cost savings for all.
FPSO deck layout model from client 2D design and
we survey of existing deck equipment. Inter discipline
clash checks done for all existing deck equipment,
new piping systems, new pipe rack, new module
support frames and modules and new deck
equipment. Isometrics produced for all piping
systems.
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
3D As-Built Modeling: Discernable Benefits to End User
“The Most Accurate Brownfield Asset Capture”
The deliverable provides 3D modelling services from cloud data to clients who require highly
accurate documentation of their facilities. Various types of 3D models are offered to client for
the as-built solutions as per below types:
1. Primitive 3D model (Primitive)
2. Semi-Intelligent 3D model (Semi-I)
3. Full-Intelligent 3D model (Fully-I).
The translation of the as-built data which captured from the cloud data are translate into
millimetre-accurate 3D CAD model using software such as Leica Cyclone, SmartPlant 3D
(S3D), PDMS, PDS, AutoCAD, Microstation etc. The cloud data that offered from the laser
scanning are compatible for current modelling software that available in the market.
Primitive 3D Model
Geometry model only with no attributes or tags attached. Drawings cannot be automatically
extracted from 3D model.
Semi-Intelligent 3D Model
Primitive model with tag numbers attached in accordance with the P&ID. No attributes are
attached and drawings cannot be automatically extracted from the 3D model.
General Work Flow for Point Cloud conversion into various type of 3D model.
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
P&ID mark-up for Piping & Equipment tagging for Semi-I modeling QAQC
Semi-I model output completed with tagging in dedicated hierarchy for Petronas Project
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
Sample output of 3D Primitive & Semi-I model in PDMS mode
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
Full-Intelligent 3D Model
The Intelligent model may be created from the Semi-Intelligent model with all attributes,
specs and catalogues dissolved in one active model using intelligent 3D software (e.g
PDMS, SP3D, CadWorx etc). In certain cases, the intelligent model also can be created
directly from the Point Cloud or Survey raw information as an optional method to suit with.
Drawings generally can be extracted automatically from this model. Under normal
circumstances, the intelligent model is created in the ‘As-Built’ condition. In the explanation
further below describes where the model is required to be manipulated or ‘squared-off’.
Where the client has requested that the ‘As-Built’ model is squared off in order to get a
presentable ‘As-Built’ engineering drawing output; the manipulation of 3D As-built conditions
to square pipework, steelwork, etc need to be carried out in some limitations & guidelines.
Sample from Petronas Platform
Sample output of 3D PDMS fully converted into full intelligent (squared-off mode) with auto drawing
extraction from PDMS software
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
Sample Monochrome Point Cloud output, Fully-I SP3D Model & As-Built Drawing Production of
onshore plant in Kerteh, Terengganu for Petronas Project
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
Sample Colored Point Cloud, SP3D Model, As-Built Isometric production & Colored Truview
c/w Geotag Generation of offshore platform in Sabah for Petronas Project
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
Lean Engineering: Quick & Safe Turnaround Solution
“Single Piece flow, concurrent engineering, co-location”
We provide optimal first unit delivered quality engineering, responsiveness to change, waste
minimization, safe and just fit-for-purpose in/at the right place, time & quantity
Design Engineers must make the right choices, early in the process, to insure client
satisfaction and low lifecycle costs. We have a complete set of capable people, processes
and tools required to deliver cost effective solutions for the repair order & minor
modifications projects as our new bottom up approach especially in topside upstream
maintenance area and MOC scope.
This allows us to utilize an efficient systems engineering, integrated product teams and
recent engineering tools to enable lean engineering processes had a continuous
improvement. By using this approach; it was shown that cost and schedule savings are
typically significant compared to conventional methods while maintaining safety
environment, seamless information flow and quality assurance.
Services
 2D & 3D Design preparation
 Engineering, procurement & fabrication management
 Mini work pack (Pre-job & construction)
 3D CAD digitizing point cloud (As-Built environment)
 Update existing 3d model onto point cloud
 2D fabrication detail drawings
 Stress Analysis
Benefits
 Reduce maintenance spares
 Reduce recurring & non-recurring cost against conventional methods
 Enables Faster Delivery Times
 One stop solution for work packing, engineering, fabrication and construction
 Improve cycle time and quality in engineering
 Correct first time
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
Sample from SHELL Miri Project – Repair Order of Closing Spool Replacement
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
Sample from SHELL Miri Project – Repair Order of Instrument Drain Line Replacement
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
Sample from VICTORIA PRODUCTION facilities – MOC Scope: Installation of pressurization gas for
Coalescer and Produced water collection vessel (3d Design, Clash Checking & Fab Isometric production)
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
Repair Order Scope
Method of Statement:
1) Corridor EDM survey & Laser Scanning for the affected areas stated in the
Inspection Report.
2) Processing the point cloud database & EDM survey data.
3) Registration of point cloud to patch all the survey points & scan targets.
4) Generate one consolidated point cloud (whichever using corridor Laser Scanning).
5) Generate As-Built model (whichever using corridor EDM survey).
6) Setting the datum /reference point for global or local system.
7) Generate Semi-I 3D design modelling from the point cloud / corridor survey.
8) Produce 2D ‘Fabrication’ Isometric.
9) Produce 2D ‘Fabrication’ Support Details (if any).
10) Produce Preliminary Bulk MTO for Client’s ordering reference.
1. Laser Scanning & EDM Survey (Site Execution)
Carried out by fully qualified, graduated surveyors who have had full training of surveying all
aspects of the mechanical and structural elements in the offshore Oil and Gas industry,
adhering to our proven quality procedures and method statements.
Our understanding of this major work scope is to supply the necessary trained personnel
and equipment to your offshore / onshore installation to complete a 100 % laser scan and
EDM survey of all the process, utility systems & structure within the defined areas.
As the areas near the header are congested, we will utilise laser scanning techniques in
order to capture the as-built data in the shortest time period. The survey team comprises 1
scanning operator & 1 surveyor.
A master control network will be established by EDM (Total-Station) survey, based on the
as-built platform primary structure for both plan & elevation ordinates.
A series of overlapping scans, within & around the required areas to ensure full capture of all
equipment, pipe-work & structural items will be carried out & repeated on each deck until all
the areas has been scanned.
Pre-analysis to ensure complete scan coverage of the required areas, will be carried out on
site before team demobilisation.
Output from Laser Scanning Activities;

Point cloud (true as-built condition) that can be converted into 3D model in CAD
format via point cloud tracing at later stage.
Output from EDM TP & Corridor Survey;

As-Built 3D Model and Tie In Point Details.
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
FIGURE 1 (A) – SCOPE OF WORK RECEIVED FROM THE INSPECTION RESULT TO CONDUCT
FURTHER SURVEY FOR AFFECTED LINES / AREAS.
Associate item survey
by EDM
TP survey by EDM
FIGURE 1 (B) – CORRIDOR & TP SURVEY OUTPUT USING EDM METHOD & CAD MODELLING
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
2. Point Cloud & Truview Generation (Office Execution)
Following demob from the facility, the scan data is registered in the Point cloud environment.
We use LFM software for this work. [LFM Server is the application used to register (orientate
individual scans to the master control values) & subsequently, generate the point cloud; this
software is provided, under licence by Z+F, the manufacturer of the scanners we own.
The database produced by the generation process, becomes the point-cloud deliverable.
Once registration & database generation are completed, photo realistic images generated
from point cloud can be manipulated and rotated 360 degree as per user requirement. The
beauty of this massive capture is we could navigate and expand the original scopes if the
client need some further modifications at the other areas nearby.
FIGURE 2 (A) - VIEW OF REGISTERED POINT CLOUD DATABASE IN LFM FOR BOP- A.
Figure 2 (B) - View of registered point cloud database & bubble image in LFM for BODP-B, Malaysia
Water.
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
Figure 2 (c) - View of Monochrome Truview Navigation
Figure 2 (D) - View of Color Truview Navigation
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
3. Engineering Drawing Production (Office Execution)
Similar with other inspection works, Inspection Execution team will establish and provide
final work pack to Winner for evaluation in terms of manpower detail and work duration
required for the field and office works.
The work pack input must be contained a list of piping and structural for replacement works
(sectional replacement or flange to flange replacement marked in the drawing), original as built drawing, P&ID, criticality and prioritization of works.
Replacement scope of work will be referred based on but not limited to the original as-built
drawing (if provided), line sketch in the inspection report, damage (corrosion) mechanism
factor related to the piping and other requirements in the work pack.
For this scope of work, engineering team will undergo several methodologies summarized
as per below:
1) Tie-In Point Verification, Redline model & Clash Check
2) Redline Markup onto old / client’s isometric
3) Fabrication Drawing Production
3.1
Tie-In Point Verification, Redline Model & Clash Check
All site survey data regarding flange Tie-In Point such as bolt rotation, flange rating, flange
deviation, as-built coordinates & cutline reference will be loaded into PDMS or CAD
software. Point cloud will be dumped onto PDMS or CAD software as well for scope reverification.
Affected piping then will be modelled up (As-Built) & squared to suit TP survey. Once all
termination points & new redline model were verified, clash checking will be performed in
order to have a new established clash free redline model prior 2D drafting activity. In
summary; the methodologies are as per below:






Load TP survey data into modeling software.
Load unified Point Cloud into modeling software.
As-Built modeling via Cyclone.
Redline Model via CAD 3D.
Quick clash analysis
Finalize 3D Redline model for replacement.
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
Figure 3 (A) – TP Surveyed Output & Redline Modeling for Fabrication
3.2
Redline Mark-Up on Existing Client’s Isometric
Every changes or modification required will be marked-up on the existing isometric supplied
from client (if provided) based on squared off redline model generated from activity 2.3.1.
Figure 2.3 (B) – Redline Mark-up on existing isometric for fabrication
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
3.3
Fabrication Drawing Production
The survey work is based on like for like replacement work, hence, the drawing must
represent the same design as per site. Basic deliverables normally to refer as final isometric
fabrication drawing. Optionally, support details drawing & penetration details drawing will be
produced wherever required in the final construction workpack.
2D Fabrication Isometric Drawing – Drawing represents the section for replacement, will be
submitted immediately once site survey completed. The drawing to be included in the
fabrication workpack on client end. New MTO will be extracted from the model via piping
specification sheet provided.
Any obstruction related to the field joint replacement work will be highlighted clearly in the
fabrication drawings together with the details (type of obstruction and length to the
obstruction point(s) from selected datum / reference points).
Then we will produce 2D Isometric from RLM / Redline model output from activity 2.3.1 &
2.3.2 above. All mark-up details will be back drafted in cad version (.dwg format) came
together with new bill of materials for issuance.
Figure 3 (C) – Sample of Piping Isometric & MTO Re-produced for Fabrication & Construction
MTO list will be re-checked with Piping Specification spreadsheet supplied from Client. All
Engineering QAQC will be implemented with reference to the P&ID’s, 3D Model, Equipment
layout, Piping GA’s and existing Point Cloud.
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
Figure 3 (D) – Sample of Penetration Details & MTO production for Repair Order Scope
Figure 3 (E) – Sample of Pipe Support Details & MTO production for Repair Order
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
LASER SCAN, TP SURVEY,
3D MODELING & CLASH
CHECK
TPs CONFIRMATION ON P&ID
(REPLACEMENT SCOPE)
DESTRUCT ISOMETRIC
CONSTRUCT
ISOMETRIC
Figure 3 (F) – General Process Workflow of Repair
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
Insp Workpack Report
Received
Site Survey Execution
(Laser Scan & TP Survey)
TPs Coord. importing
into 3D Model & AsBuilt Piping Modelling
3D Piping Model square
off to datum reference
(Redline Model)
Clash Check
2D Drawing
Production
Fabrication
Isometric
Pipe Support
Details
2D Drafting
2D Drafting
MTO checking
MTO checking
QAQC
QAQC
Figure 3(F) – Sample workflow of Fabrication Drawing Production for Repair Order scope
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
COMPANY EXPERIENCE
MOST RECENT PROJECT
Project Name/ Installation
Client Name
8 REPAIR ORDER SOW
FOR BARAM A & B
(BAKP-B, BAK-B &
BADP-A)
DAYANG
ENTERPRISE SDN
BHD / PCSB
KIKEH FLEET SUPPORT
2016 – LASER SCAN &
TP’S SURVEY
SBM MALAYSIA
27 REPAIR ORDER SOW
FOR BARAM A & B
(BADP-B, BAP-B, BAKPB, BAK-B, & BAP-A)
DAYANG
ENTERPRISE SDN
BHD / PCSB
PROVISION OF DETAIL
DESIGN FOR EPCC OF
F12 FACILITIES
3D LASER SCAN
SURVEY AT KNDP-A –
HP COMPRESSOR
PROVISION OF
MANPOWER,
EQUIPMENT AND
TOOLS FOR 3D LASER
SCANNING & SURVEY
1) SMG-A
2) EWDP-A
3) TBG-A
4) SFDP-A
PLATFORMS ASBUILTING AND
INTELLIGENCE DATA
POPULTION INTO PEDMS FOR MLNG2
1) B11DR-A
2) M3DR-A
3) M3PQ-A
LASER SCANNING & 3D
SEMI-INTELLIGENT
MODELLING FOR
TAPIS-D
Scope
RANHILL
WORLEYPARSONS
SDN BHD
Laser scanning, TP
Survey, 3D Modelling ,
Produce Fabrication
Drawing & Bulk MTO
Production
Laser Scanning, TP
Survey, Clash Checking
& Spool Audit Survey
Laser scanning, TP
Survey, 3D Modelling ,
Produce Fabrication
Drawing & Bulk MTO
Production
Laser Scanning, Creating
Panoramic Photos &
Truview Layout
UMW / TALISMAN
ENERGY
Laser Scanning & 3D
Modelling
Start Date &
End Date
May 2016 – June
2016
May 2016 Current
March – April
2016
March 2016 –
April 2016
March 2016
SAPURA KENCANA Laser scanning and 3D
Feb 2016 – May
PINEWELL
semi-intelligent modeling 2016
INTERGRAPH /
PETRONAS MPM
Color laser scanning, 3D
intelligent modeling
(S3D), Updating P&ID,
Drawing Production, and
Data management.
WOOD GROUP
MUSTANG /
EXXON
Laser scanning and 3D
Dec 2015
semi-intelligent modeling
Tel: +603 4270 2447 Fax: +603 42702616
Nov 2015 Current
_________________________________________________________________________________________________________________________________________________________________
Scope
Start Date &
End Date
Client Name
PROVISION OF
MANPOWER EQUIPMENT ,
TOOLS AND
CONSUMABLES TO
CARRY OUT ON SITE
LASER SURVEY FOR
TAPI-A
Laser Scanning, Clash
SAPURA KENCANA
Check design against
PINEWELL
point cloud, re-issue IFC.
Dec 2015
D35DP-B WELL TIE IN (9
WELLS)
SAPURA KENCANA Check design against
PINEWELL / PCSB
point cloud, re-issue IFC,
& Spool Audit
Sep 2015 – Jan
2016
MASTER PRICE and
SERVICE AGREEMENT
(MPSA) FOR SKO
Platforms
Completed Platforms todate:
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
15)
16)
17)
18)
19)
20)
21)
22)
23)
24)
TBG-A
TBG-B
E11R-B
F9JT-A
WLDP-A
WLDP-B
WLP-A
BKP-A
BYG-A
BYR-A
BYP-A
BYDP-A
MCOT
BAP-A
BAP-AA
BADP-A
BAP-B
BADP-C
BAJT-D
BAJT-F
BAK-B
API-1
BNDP-I
BNV-A
25)
26)
27)
28)
29)
30)
31)
32)
33)
34)
35)
36)
37)
38)
39)
40)
41)
42)
43)
44)
45)
46)
47)
BADP-E
BADP-G
BAJT-H
BA-18
TKDP-A
TKDP-B
TKK-A
TKQ-A
TKJT-C
TKJT-D
TKJT-E
TKJT-F
TKJT-G
TKJT-H
TK-3
BNJT-D
BNJT-H
WLK-A
D35DP-B
D35JT-C
TEDP-A
TEDP-B
TEJT-C
PCSB – SKO,SBO,PMO
1) BCOT
2) KUJT-A
3) EWDP-A
4) EWDP-B
5) EWVA-A
6) SMDP-A
7) SMJT-C
PETRONAS
CARIGALI SDN
BERHAD
semi-intelligent modeling 2014 - Current
(4+1 years contract)
INTERGRAPH /
PETRONAS GTS/
PETRONAS PMU
Laser scanning, 3D
intelligent modeling
(S3D), Update P&ID and
Data management.
Tel: +603 4270 2447 Fax: +603 42702616
December 2013 –
December 2015
_________________________________________________________________________________________________________________________________________________________________
Client Name
Scope
Start Date &
End Date
PETRONAS/
RANHILL WORLEY
Laser scanning, 3D full
intelligent modeling,
clash checking and reengineering drawings
July 2013 – May
2014
LASER SCAN & PDMS
INTELLIGENT FOR SKO
PLATFORM (PHASE 1 –
12 PLATFORMS)
1)
2)
3)
4)
5)
6)
BODP-A
BODP-B
BODP-C
BOP-A
BNP-A
BNP-B
7)
8)
9)
10)
11)
12)
BN14
TKP-A
TKP-B
WLDP-C
TEP-A
TEP-B
BARONIA – BNDP-B
WELL TIE IN PACKAGE
(3 WELLS)
PETRONAS
CARIGALI SDN
BERHAD
TEJT-T WELL TIE-IN
PACKAGE (2 WELLS)
PETRONAS
CARIGALI SDN
BERHAD
BARONIA – BNDP-A
WELL TIE IN PACKAGE
(2 WELLS)
PETRONAS
CARIGALI SDN
BERHAD
SUJT-C WELL TIE-IN
PACKAGE (2 WELLS)
PETRONAS
CARIGALI SDN
BERHAD
TBG-A & TBG-B WELL
TIE IN PACKAGE (4
WELLS)
PETRONAS
CARIGALI SDN
BERHAD
MMC-SKO PRICE
AGREEMENT
1) TEP-A & TEP-B
2) CLUSTER 12
(7 PLATFORMS)
3) D18MP-A & BYP-A
MMC
FPSO PERISAI KAMELIA
EMAS
SEPAT FSO & MOPU
MMC/PCSB
E11RC
TECHNIP /
PCSB
& Spool Audit
point cloud, re-issue IFC.
& Spool Audit
& Spool Audit
& Spool Audit
Laser scanning, 3D semiintelligent modeling,
Clash checking and reengineering drawings.
(2+1 years contract)
Feb – Jul 2015
Feb - Apr 2015
Nov 14 – Apr
2015
Aug - Dec 2014
Jun - Sept 2014
January – March
2014
semi-intelligent
modeling, Clash
Apr-14
checking and reengineering drawings.
Jun-14
semi-intelligent modeling
May - June 2014
semi-intelligent
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
Client Name
BEKOK-C
TECHNIP / PCSB
JN23
TECHNIP / SHELL
Scope
modeling, Clash
semi-intelligent
modeling, Clash
checking .
modeling, Clash
Start Date &
End Date
October –
November 2014
July 2015
Note:
1. We are the former contract holder for Master Price and Service Agreement (4+1
year’s contract) for PETRONAS CARIGALI SDN BHD.
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
Other Project in Last 5 Years
Client Name
RBDP-B VIETNAM
TECHNIP /
PCSB
DNV/
TECHNIP
TECHNIP /
PCSB
BEKOK-C
TKDP-A
GUNTONG A, B & C
EMEPMI/
TECHNIP
MDA & MDPP
TECHNIP/
HESS
BOP-A / BKP-A
OPE /PCSB
ERB WEST (EWDPA,EWDP-B,EWG-A &
EWP-A)
MMC /PCSB
TCOT: PWSU &
REMEDIAL WORKS
KHL /
EMEPMI
FPSO
RUBICON,PHILIPINES
SBO ASSET LASER
SCANNING:
RUBICON
OFFSHORE
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
EWDP-A
EWDP-B
EWP-A
EWQ-A
EWG-A
EWV-A
KIND-P
SMQ-A
SMJT-G
SMR-A
11)
12)
13)
14)
15)
16)
17)
18)
19)
20)
21)
SMG-A
SMP-A
SMP-B
SMP-C
SMDP-A
SMDP-B
SMK-A
SMJT-C
SMJT-D
SMJT-F
SMJT-E
PCSB SBO
Scope
Laser Scanning , Clash Check
PDMS + LMI
Piping As-built survey & P&IDs
notification
Laser Scanning & 3D modeling
Laser scanning, 3D semiintelligent modeling, Clash
checking and re-engineering
drawings.
Start Date &
End Date
Apr-11
June – September
2011
June – September
2011
January – May
2013
Laser Scanning , EDM survey ,
3D PDMS modeling
Clash check Point Cloud VS new
design for modification project
Clash check Point Cloud VS new
design for modification project –
PDMS + LMI + LFM
Laser Scanning, Clash Check
design against point cloud, reissue IFC.
Laser Scanning & issue point
cloud for Finite Element Analysis.
March – May
2012
January – March
2011
Laser Scanning and updating
P&ID for 21 platforms for
PCSB/SBO
April – December
2011
July – October
2011
Jun-12
SMDP-B
MMC/PCSB
Laser Scanning & EDM survey
for Samarang IO project
FPSO KIKEH
SBM
Malaysia
Laser Scanning, Clash Check
design against point cloud, re-
Tel: +603 4270 2447 Fax: +603 42702616
January – March
2011
January – March
2011
March – May
2011
_________________________________________________________________________________________________________________________________________________________________
Client Name
WEST LUTONG ,
BODP-C
OPE/ PCSB
MCOT & BAP-A
OPE / PCSB
BOKOR PHASE 3
AKER
SOLUTION/
PCSB
BEKOK A
RNZ/PCSB
BEKOK C
RANHILL
WORLEY/
PCSB
BEKOK A & TIONG A
RNZ/PCSB
Scope
issue IFC.
3D Laser Scanning, EDM survey
& Clash Checking
3D Laser Scanning, EDM survey
& Clash Checking
Laser Scanning & EDM survey,
Clash Check & issue clash free
model.
Laser Scanning, 3D modeling
Clash Check & issue clash free
model.
Laser Scanning & 3D modeling
3D PDMS modeling
YETAGUN
MYAMMAR 3D PDMS full intelligent
TNS/ PCVL modeling
Laser scanning , 3D modeling ,
CARIGALI
Clash checking and reHESS
engineering drawings
YETAGUN A , B & C
CKP/CKR
BNDP-I
RNZ/
PETROFAC
ANPG-A
RANHIL
WORLEY/
PCSB
ANPG-A
MMC/ PCSB
Clash checking and reengineering drawings
Start Date &
End Date
July – December
2012
July – December
2012
June – September
2011
February – June
2012
February – June
2012
February – June
2012
March December 2012
June – December
2012
Jul-12
Oct-12
Oct-12
19 PLATFORMS SKO
PIPELINES REJUV
PROJECT:
1)
2)
3)
4)
5)
6)
7)
TKDP-A
TKJT-E
TKJT-C
TKP-B
TKJT-F
TKJT-D
TKJT-G
11)
12)
13)
14)
15)
16)
17)
WLDP-C
BN-14
BNP-A
BNDP-B
BNP-B
BNG-B
E11R-A
OPE/ PCSBSKO
Laser scanning whole platforms
(19 platforms)
Tel: +603 4270 2447 Fax: +603 42702616
October –
December 2012
_________________________________________________________________________________________________________________________________________________________________
Client Name
Scope
Start Date &
End Date
TCOT AND OSC
PETRONAS
PMO
Laser scanning, 3D full intelligent
modeling, Clash checking and reengineering drawings.
May 2013 – May
2014
LEWEK EMAS FPSO
EMAS/
PTSC
VIETNAM
GEMUSUP KAKAP
PETRA/
SHELL
BADP-B
PCSB/
LEIGHTON
SUDP-A
DELEUM /
CETCO
8) TKJT-3
9) TKP-A
10) SIMP-A
18) BODP-A
19) BODP-B
RNZ /
CARIGALI
HESS
THHE/
SHELL
CKP AND CKR
D12 & LAILA
BCBF for CKP AND CKR
EPIC /
CARIGALI
HESS
Laser scanning, 3D modeling,
Clash checking and reengineering drawings, Assist
HUC.
Laser scanning, 3D modeling,
Clash checking and reengineering drawings, Assist
HUC.
Laser scanning, 3D semiintelligent modeling, Clash
checking and re-engineering
drawings
Laser Scanning, TP Survey, £D
Design Model, Clash Report &
Analysis
Laser Scanning and Updating
PDMS Model, Spool Audit and
Clash Analysis
Structural Survey and 3D AsBuilt Model
Laser Scanning and Updating
PDMS Model, Spool Audit and
Clash Analysis, Engineering
Rectification by Reproducing
AFC/IFC
Tel: +603 4270 2447 Fax: +603 42702616
Jul-14
August 2013 –
May 2014
Oct-13
Apr-14
Feb-14
July-14
August-14
_________________________________________________________________________________________________________________________________________________________________
Company’s Experiences (BRUNEI)
Brunei operations start in March 2010 with over 200 projects already undertaken.
Below are the some list awarded Project to Infotrax Engineering (Brunei) in the recent
year.
PROJECT
NAME
CPRP11
REJUVENATION
PROJECT
INSTALLATION
CLIENT
WORKSCOPE
START/END
DATE
CPRP11
AKER
SOLUTIONS
 3D Laser scanning.
Deliverable of 3D full
Primitive modeling.
Feb 2016
IRON DUKE WTI
POST DRILL
IDDJ01
DAMIT
WORLEY
ENGINEERING
WELL TIE IN, EDM
Survey , Laser
Scanning ,3D modeling
,Clash check , reengineering drawings.
Jan 2016
CPDP10
INSTRUMENT
UPGRADE
PROJECT
CPDP10
PETROKON
EDM Survey , Laser
Jan 2016
AMCX09
REJUVENATION
PROJECTS
5 PLATFORMS
 AMDP09
 AMCP09
DAMIT
WORLEY
ENGINEERING
 3D Laser scanning.
Deliverable of 3D full
Primitive modeling.
Nov 2015 Current
SAHID
WELL TIE IN, EDM
Survey , Laser
Nov 2015



AMCA09
AMAP09
AMLQ09
CWDP01
CWDP01 – CPRA
WELL TIE IN
BLNG COGEN II
PROJECT
ZERO RED
PROJECT
BRUNEI
LIQUIFIED
NATURAL GAS
(BLNG)
FOSTER
WHEELER

3D Laser scanning.

Deliverable of 3D
full Primitive
modeling.
5 PLATFORMS FOR
EAST
INSTALLATION.
TECHNIP


3D Laser scanning.
Deliverable of 3D
full Primitive
modeling.
Tel: +603 4270 2447 Fax: +603 42702616
2014
2014
_________________________________________________________________________________________________________________________________________________________________
SAHID
SDN.BHD


3D Laser scanning.
Deliverable of 3D
full Primitive
modeling.
2014
PETROKON
UTAMA
SDN.BHD


3D Laser scanning
Provide Redline
markup
2014
CPDP36
CPDP33
BLWJ01
BUDP01
AMDP09
AMDP17
AMDP25
DAWJ01
FADP01
FADP03
DAMIT
WORLEY

CPRA

Theoretical trial
fit/Final fit
Provide redline
mark-up for spool
fabrication.
Spool survey
CPCX-10 TEST
FACILITY
UPGRADE
PROJECT
CPCX-10
PETROKON
UTAMA
SDN.BHD


3D Laser scanning
Provide Redline
markup
2014
AMAP-09 FRESH
WATER MAKER
UPGRADE.
AMAP-09
BRUNEI SHELL
PETROLEUM


3D Laser scanning
Provide
Redline
markup for spool
fabrication
Spool survey
2015
2015

3D Laser scanning
Provide
Redline
markup for spool
fabrication
Spool survey

3D Laser scanning.
2015
ZERO RED
PROJECT
CPCX-12 TEST
FACILITY
UPGRADE
PROJECT
7 PLATFORMS FOR
EAST
INSTALLATION.
CPCX-12
WELL TIE-IN
PROJECT (WTI)



CPRP-07
CPRP-07 SHUT
DOWN I SCOPE
AMCX-06
REJUVENATION
PROJECT
4 INTELLIGENT
PIGGING PID
PROJECTS
AMCX-06
1.
2.
3.
4.
AMWJ31
AMWJ80
AMDP-03
AMPP-17
AKER
SOLUTION
DAMIT
WORLEY
DAMIT
WORLEY


2014-2015

Deliverable of 3D
full Primitive
modeling.
EDM Survey , Laser
&Clash check.
Tel: +603 4270 2447 Fax: +603 42702616
2013
_________________________________________________________________________________________________________________________________________________________________
AMPA 09 GAS
WSF PROJECT
2011
AMPA 09
DAMIT
WORLEY
EDM Survey , Laser
&Clash check.
2011
AMPA 09 GAS
WSF PROJECT
2010
AMPA 09
DAMIT
WORLEY
EDM Survey , Laser
&Clash check.
2010
CWDP01
INTERIM GAS
LIFT HEADER
EXTENSION
CWDP01
DAMIT
WORLEY
Assist HUC for
installation.
2011
DAMIT
WORLEY
EDM Survey , Laser
&Clash check.
2011
EDM Survey , Laser
Scanning ,3D
modeling, update
drawings.
EDM survey ,Laser
Scanning , 3D
modeling Intelligent
2013
EDM Survey , Laser
EDM Survey , Laser
Scanning & assit HUC
contractor
2010
BNLG- GLASS
LEVEL
REPLACEMENT
PROJECT
REPAIR ORDER
WORKS
WATERFLOOD
PROJECT
SCOT PHASE 1C
PUMP
34 WELL TIE IN'S
FAPP-03
1.
2.
3.
4.
CPDP-31
CPDP-33
CPPP-01
CPPP-04
SKS WOODS
DAMIT
WORLEY
AMRP01
SHAHID
34 Wells
SHAHID
2011
2011-2015
Note:
1. We have current long-term project for SHAHID for Well Tie-In EDM Survey
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
Company’s Experiences (Overseas)
Client Details
Name: Aker
Contact: K. Johnston
Tel No.
01224 599000
Project
Esso
FPU Balder
1997 – 1999
Name: APG
Contact: D. Workman
Tel No. 01224 599000
Texaco – Galley
1996 – 1996
Name: BP Azerbaijan
Contact: Sam McAdam
Azeri West
Production Deck
2004-2006
New Build
2 Drill Ships
1998 – 1999
Name: Harland & Wolff
Contact: Allan Hayley
Tel No.
Name: Single Buoy Moorings
FPSO Falcon
2005
Name: Husky Energy
Contact: Kevin Johnson
FPSO White Rose
2002-2005
Name: Wood Group Engineering
Ian MacKenzie
BP Clair Project
2003 – 2004
FPSO Brasil
conversion
2002
FPSO Kuito
upgrade
Angola
2002
Alba Upgrade
Phase I & II
1996 – 1997
Name: Brown and Root
Contact: Jim McAllister
Tel No. 01224 777000
Name: AIOC (BP Azerbaijan)
Contact: Jim McCallum
Name: Bluewater
Contact:
Tel No.
BP Shah Deniz
Project
2004-2007
FPSO Uisge Gorm
upgrade
South Africa
Scope
This vessel had to be completely refurbished.
We were contracted to prove all Aker design for
clash verification and space management.
Provided designers to assist with project.
This vessel had to be completely refurbished
and 4 new process modules and equipment
installed. We were contracted to prove
engineering studies and produce all pipework
isometrics and supports.
Build Control and Hook up of Azeri West
platform at SPS yard in Baku Azerbaijan.Team
of 6 surveyors.
We were contracted to supply dimensional
control services to assist Harland & Wolff in the
build of 2 new vessels, i.e. module-ship section
interfaces, super structure to hull and outfitting
of equipment.
Major upgrade to FPSO Falcon.
Responsible for survey of all new pipe routes
and tie-ins and to position new skid packages.
Fabrication check of all new pipespools.
Control and verification of module support
stools and as-build of deck in Korea plus build
control of modules installation in
Newfoundland Canada
Build control of integrated deck to eliminate
offshore hook-up welding.
280 spools installed without any offshore
welding/testing
Conversion of tanker to FPSO.
Survey of complete deck layout,pump rooms
and Cargo tanks.Preparation of piping
isometrics/support details
Major brownfield modifications to install seven
new modules.Installation corridors and hook-up
pipework controlled.
Major modifications to existing facilities for
product enhancement All new piping design
proven to eliminate all offshore welding.(over
600 spools)
Provide dimensional control services to
complete build of Integrated deck for Shah
Deniz field in Caspian
Production of structural/piping fabrication
drawings.
Dimensional control support to site, Cape
Town, S.A.
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
Client Details
Name: Bluewater
Project
FPSO Bleo Holm
upgrade
1999 – 2001
BP Azeri Central
Project, Baku
2003 – 2007
Name: AIOC
Contact: Derek Patience
Name: Amec Group
Contact: T.Telford
FPSO Bonga
Nigeria
2002-2005
EPC-22
Mexican Gulf
2001-2003
Name: PMEX
Contact: I. McGhee
Tel No.
Name: Marathon Oil
Contact:
Tel No.
Name: Aker Kvaerner
Contact: Brian Laing
Tel No.
Name: AMEC Services
Contact: Tom McQueen
Tel No.
Name: BP Exploration
Contact: Alan Stillwell
Tel No.
Name: BP America
Contact: Joan Costello
Tel No.
Alba Phase 2
Equitorial Guinea
2002-2003
Britannia M.P.
Compressor
2003-2004
Shearwater Hookup
2001-2003
ETAP Project
Name : KBR Ltd
Contact : Bill Dunnitt
FPSO Carratinga
and
FPSO Barracuda
2005-2006
Amec Group
Buzzaerd Field
Hook-Up
2005-2007
Dumbarton Project
on FPSO GP3
2005
Mad Dog Project
Gulf of Mexico
2002-2004
Aker Kvaerner Offshore Partners
Contact Ian Reid
Shell UK
Contact Ashley Burt
Shell UK
Contact Ashley Burt
KCA Deutag Drilling Ltd
Brent Bravo Utility
shaft upgrade :
2006
Brent Delta Utility
shaft upgrade :
2006
Chirag 1 : Baku
Scope
Major upgrade to FPSO.
As-build of existing brownfield and clash check
of new design.
Fabrication control of new build jacket and
integrated deck
to ensure first time fit.Survey of loading barge
to confirm clearances.
Build control at Amec yard Wallsend and
Hook-up
support onshore/offshore Nigeria
Full Dimensional control of Hook-up
500+ hook-up spools installed with no offshore
welding.
100 % success rate
Fabrication control and installation of new
topside, bridge linked to existing Alba platform
Full 3D corridor model and clash check of all
new design
Full control of hook-up.
Jackets/topsides/all interfaces resulting in nonweld hook-up
Elimination of all offshore hook-up welding by
strict build control. 485 hook-up spools installed
with no offshore welding : 100% success rate
Elimination of all offshore hook-up welding by
strict build control.380 hook-up spools prefabricated and installed
With no offshore weldind : 100% success rate
Provision of Construction Manager and
Commissioning
Manager.Provision of line walking team to
establish pre hydrotest completions.
Survey team supplied for hook-up pipework
verification.
Support project with DC services to install all
hook-up and carryover pipework and structural
elements
Laser scan of compete process deck and Upper
deck.
To allow feed study for installation of 7 new
process modules and associated tie-ins.
Laser Scan of 50 mt length of Utility shaft leg
to allow clash check of new platforms and
pipework
Laser Scan of 50 mt length of Utility shaft leg
to allow clash check of new platforms and
pipework
Laser scan of Machine deck and Drill Rig levels
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
Client Details
Contact Peter Brackenbrough
KBR Production Services Ltd
Aberdeen
Contact Murdo McLeod
SBM Inc
Contact David Wilkinson
Marathon Oil UK Ltd
Contact Dave Brocklesby
Aker Kvaerner Offshore Partners
Contact Ian Reid
Aker Kvaerner (Canada) Ltd
Contact Huntley Nesbitt
Petrobras (Brazil)
Project
Azerbaijan : 2006
Forties Alpha
PWRI
Project : 2006
FPSO Schiehallion
Turret mods : 2005
Brae Alpha Enoch
Project : 2006
Hewene Brim
Water Inj upgrade
project :
2004
Sedco 714 New
Mud Pump
installation
White Rose
Additional mods
P40 Upgrade
Husky Energy Ltd
Contact Kevin Johnston
FPSO Sea Rose
Nov/Dec 2006
Husky Energy Ltd
Contact Kevin Johnston
WGE North Sea Ltd
Contact George Campbell
FPSO Sea Rose
Jan 2007
BP Magnus
Cold Start Project
Transocean Drilling
Cotact Peter Meikle
Scope
1-4 to accommodate major upgrade
Laser scan of various areas to allow design of
new PWRI
upgrade
Laser scan within Turret of Schiehallion to
allow design of new equipment and pipework
Laser scan of various areas to allow design of
new module skids and pipework
Laser scan of extensive deck area and central
pipe rack to allow new feed and design to be
carried out.
Laser scan of pump room to allow feasibility
study to be carried out for additional mud pump.
Dimensional survey within utility shaft to prove
new design routings of various mods
Laser Scan and 3D model of complete process
module to allow major brown field upgrade
Laser scan of complete Turret internal and
externally to enable production of full PDS
model
Laser scan of main deck to assist in feasibility
study for major upgrade
Laser scans of wellbays modules 1 and 2 to
allow long term flowline review.
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
Customer Testimonials
Client
: PETRONAS CARIGALI SDN BHD
Project : LASER SCANNING AND 3D AS-BUILT ( MASTER PRICE SERVICE
AGREEMENT 3 + 1 CONTRACT )
Location : SARAWAK AND SABAH
EVALUATED AS “ B “ GRADE CONTRACTOR FOR 2014 AND
“A” GRADE CONTRACTOR FOR 2015.
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
Client
: AKER SOLUTIONS
Project : LONG TERM AGREEMENT FOR ENGINEERING AND HUC
Location : BRUNEI WATER
From: <Supplier.Approval@akersolutions.com>
Date: 5 January 2016 at 18:08:09 GMT+8
To: <shamshur@infotraxeng.com>
Cc: <Shaleida.Othman@akersolutions.com>
Subject: Aker Solutions Qualification Score
Dear Shamshur,
Thank you for your response to our Supplier Qualification Questionnaire.
After evaluation of the qualification questionnaire and all necessary documentation, your
questionnaire has earned a score of 78 out of 100. You have now been categorized as a level A
supplier in our Supplier Qualification System.
Enclosed, the rating sheet with more information about the score. If any major improvements are
launched in your organization, feel free to contact us after which we shall increase your score.
Best regards,
Shailaja Mali
Supplier Approval
Aker Solutions
Tel: +91 20 6691 8390 | Mob: +91 99231 07393
Shailaja.Mali@akersolutions.com | www.akersolutions.com
Client: Prosafe Production, Singapore
Project: DC Survey requirements for Azurite Project FDPSO, May-Jun’08
On Monday afternoon we completed the installation
of the last central Piperack section on board the
Azurite vessel. This was quite an achievement, and
used a new innovative approach by Prosafe Module
Yard team for FPSO Piperack construction and
installation.
We planned, constructed and assembled the
Piperack section in the module yard at Kencana in
exactly the same layout as they would be positioned
on the vessel. This also included the welded
pipework which was set up butt weld to butt weld
with only the necessary weld gap separating the
pipes. With the use of an experienced third party
Dimensional Control company,’Scopus’ we surveyed
the as-built positions in the Module Yard and
transferred these to the shipyard support stools.
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
Working with our module installation group for the
Azurite project, ‘Masstrans’, we developed a guide
and bumper system that would bring the modules
into the exact position that we constructed in
Kencana. Utilizing ‘Asian Lift Hercules’ vessel we
started lifting Piperack sections on Wednesday as
per our schedule and completed the lifting safely
and on schedule on sunday afternoon.
The result of this innovative method was to save
approximately 180 butt welds for Piperack hook-up
and more importantly costly use of the quayside
crane for spool installation. This method will lead to
a major schedule saving for Piperack completion
and hook-up to existing systems.
This was a great example of teamwork starting with
the Prosafe team in the module yard, Kencana our
fabricators who set up the modules in their
fabrication shop in the vessel position, Masstrans
who designed and planned the bumper system and
installation method, Asian Lift who carried out the
Piperack section lifting and installation, Scopus who
aligned the module sections and ensured they would
fit, Keppel who landed the modules on the deck and
took on board our construction philosophy and the
Prosafe Vessel Construction team who organized
the installation at the vessel side. Innovation and
teamwork combined to bring a great result for the
Project, well done to all involved.
Client
Project : WELL TIE IN - HUC
Location : SUMANDAK
First and foremost I would like to thanks your team for assisting us during Sumandak Tepi
Well tie-in activity. Indeed application of laser scanning proven to be successful in assisting
us for the scope of work, provided we follow step by step the process. It is also beneficial in
identifying clashes and accurate tie –in which in turn eliminate rework and modification at
site. Just for your info for C07 well tie-in we completed it within one day.
Regards
Mohamad Hafiz B Amran (MHA)
“Design it Right,Operate it Right, Maintain It Right”
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
Client
Project : HUC – HELIDECK LASER SURVEY
Location : BARAM – BADP-B
PROJECT MGR : A RASHID A AMIN ( PROJ / EORC )
Pictures attached are
 Module Yard construction set-up of Piperacks
 Piperack section being installed by Asian Lift
 The installed forward Piperack modules
 The fit-up achieved after installation (the yellow steel is the temporary bumpers set up in
Kencana to provide the close fit-up and no hook-up spool requirement)
Regards
Richard
Richard Glancy
Topsides Delivery Manager
Azurite Field development Project
Prosafe Production
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
Client: Carigali - Schlumberger, Malaysia
Project: BOKOR Phase II, Development. Jul’08
Gents
See attached photos of the Main Deck Skid Beams
fit-up. TLO achieved a very good fit-up thanks to
Infotrax Engineering.
It would have been even better if TLO had used flat
'hook' beams but the trouble was due to some weld distortion on the hook beams built in a
rush out of scrap. The final result ok though and
accepted.
Regards
Tony Clerk – Structural Engineer, Schlumberger
Client: Carigali HESS / EPIC Mushtari
Project: Booster Compression Brownfield (BCBF) Modification
Location: MTJDA
When the master PDMS database declared superseded
(which found not reflecting to As-Built), all piping drawings
(Design AFC ISO drawing) are required for re-verification
compared to the existing condition. Non-As Built PDMS
database will expose inaccuracy information in the
AFC/IFC drawing production and definitely affect fabrication
and installation during HUC.
Benefits:
- Reduce Shutdown (saved 10 days)
- Reduce Hot Works
- Reduce Hazard Minimum FFW
Regards,
Roslan Sallehudin
Project Manager
Carigali Hess
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
Jayaman Tarmidi
Project Manager
EPIC Mushtari
Client
Project
Location
: DELEUM / PETRONAS CARIGALI /CETCO
: SUMANDAK BOOSTER PUMP PROJECT
: SUMANDAK , SABAH
Dear Tengku,
Just to update your team, this Sumandak Booster Pump Project have been discontinued by
PCSB and we have already rig down the system. This pilot project was discontinued due to
after study conducted by PCSB which found that the reservoir aquifer is strong enough to
maintain pressure and production without the booster pump system. Nevertheless, we have
manage to installed and commission the system with success.
We would like to thank you for your team’s support and great work in the design/engineering
phase up to fabrication which help us a lot in our project. We have learn a lot from your
company and look forward on working again with your team in the near future.
Thank you.
Regards,
Mohd Dali Mohd Ismail I Staff Engineer I
Deleum Chemical - HQ
No.2 I Jalan Bangsar Utama 9 I Bangsar Utama I 59000 Kuala Lumpur I Malaysia I
D/L: 603-22957627 I H/P: 012-3945594 I
mohddali.mohdismail@deleum.com I www.deleum.com I
A member of the DELEUM Group and officially an OPITO certified Company
Tel: +603 4270 2447 Fax: +603 42702616
_________________________________________________________________________________________________________________________________________________________________
APPENDIX #1: PETRONAS LICENSE
Tel: +603 4270 2447 Fax: +603 42702616
LESEN MEMBEKAL PERALATAN/MEMBERI PERKHIDMATAN KEPADA
SYARIKAT-SYARIKAT CARIGALI DAN PENGELUAR MINYAK/GAS DI MALAYSIA
Pada menjalankan kuasa-kuasa yang diberi oleh Seksyen 7, Akta Kemajuan Petroliam, 1974 dan mengikut Peraturan 5, Peraturan-Peraturan Petroliam,1974, yang
diwakilkan kepada saya oleh YAB Perdana Menteri Malaysia, saya dengan ini mengeluarkan lesen dibawah Peraturan 3, Peraturan-Peraturan Petroliam ini bagi tujuan
di atas kepada:
Tarikh Dicetak: 21.10.2015
INFO-TRAX SDN BHD (229813-M)
42-3, JALAN SULAIMAN 1 TAMAN PUTRA SULAIMAN
68000 AMPANG
SELANGOR
Butir-butir Lesen adalah seperti berikut:Nombor Syarikat
: 229813-M
Jenis Syarikat
: LESEN
Tempoh Sah Lesen
: 07.09.2015 - 06.09.2018
Yuran Lesen
: RM
Bidang pembekalan/perkhidmatan
: Seperti di Lampiran 'BIDANG-BIDANG LESEN / PENDAFTARAN'.
1,500
Syarat-syarat Khas yang dikenakan ke atas Lesen ini:Tertakluk kepada syarat khas seperti di lampiran berkaitan.
Syarat-syarat Am Lesen ini adalah seperti yang tercatit di halaman seterusnya.
Peringatan: Pemegang Lesen Hendaklah Memohon Pembaharuan Lesen Tiga (3) Bulan Sebelum Tarikh Tamat Lesen.
Sijil ini dicetak oleh komputer dan tandatangan pihak Petronas tidak diperlukan.
Muka Surat
1/3
SYARAT-SYARAT AM LESEN PETRONAS
1.
Syarikat ini dikehendaki berdaftar, mendapatkan lesen, permit atau kebernaran daripada pihak
berkuasa yang berkenaan untuk mengendalikan perkhidmatan atau pembekalan peralatan atau
bahan-bahan yang berkaitan dalam operasi atau aktiviti-aktiviti syarikat ini yang diperlukan;
f. Mengsub-kontrak kerja kepada kontraktor lain tanpa kebenaran bertulis daripada PETRONAS.
2.
Lesen ini tidak boleh dipindahmilik kepada mana-mana syarikat/pihak lain;
h. Memasuki atau menerima kontrak atau tender semasa di dalam penggantungan lesen.
3.
Lesen ini akan dibatalkan sekiranya syarikat ini didapati berada di dalam proses penyelesaian
hutang-hutangnya (liquidation), penggulungan (winding-up) atau pembubaran (dissolution);
i.
Memberi maklumat palsu, tidak tepat atau mengelirukan.
j.
4.
Syarikat ini hendaklah memaklumkan kepada PETRONAS sebarang perubahan ke atas kedudukan
syarikat seperti pemilikan ekuiti, lembaga pengarah dan kakitangan pengurusan dalam masa
empat belas (14) hari dari perubahan tersebut berlaku. Kegagalan untuk berbuat demikian
boleh mengakibatkan lesen ini dibatalkan;
Tidak mematuhi peraturan-peraturan dan etika-etika tender meliputi tetapi tidak terhad kepada
menghantar surat layang, memberi rasuah atau melobi;
5.
Syarikat ini hendaklah mengambil tindakan segera untuk memenuhi syarat-syarat khas yang
dikenakan di dalam lampiran lesen dan memaklumkan kepada PETRONAS atas perkembangan
tindakan tersebut;
6.
Syarikat ini tidak dibenarkan mengambil syarikat lain sebagai prinsipal, agen, sub-kontraktor atau
sebaliknya untuk memberi apa-apa perkhidmatan atau membekal apa-apa kemudahan, kelengkapan
atau peralatan bagi pihaknya tanpa kebenaran bertulis daripada PETRONAS terlebih dahulu;
7.
Syarikat hendaklah membenarkan wakil pihak PETRONAS membuat lawatan pemeriksaan/audit ke
atas premis/syarikat dan menyemak/menyalin dokumen-dokumen serta menemubual kakitangan
syarikat dan pihak yang berkaitan;
8.
Lesen ini hendaklah ditunjukkan kepada pegawai-pegawai PETRONAS apabila dikehendaki untuk
diperiksa;
9.
Lesen ini adalah sah untuk memberi perkhidmatan dan membekal peralatan bagi bidang-bidang
yang tercatat di lampirannya sahaja;
10. Syarikat ini boleh dikenakan tindakan sekiranya pada pendapat PETRONAS, syarikat melakukan
satu atau lebih daripada perkara-perkara seperti berikut;
a. Gagal melaksanakan kerja yang diberikan sehingga selesai.
b. Gagal untuk melaksanakan tanggungjawab kontrak atau mana-mana tanggungjawab lain di
bawah undang-undang terhadap rakan kongsi, prinsipal, agen, sub-kontraktor dan sebagainya.
c. Menerima 'garnishee order'.
d. Menghadapi tindakan muflis.
e. Tidak dapat dikesan melalui alamat terakhir.
g. Menolak mana-mana kontrak atau tender yang diberikan.
k. Melakukan kegiatan yang tidak sewajar dengan Lesen ini.
11. Menurut peraturan 9, Peraturan-Peraturan Petroliam 1974, seseorang yang memulakan atau
meneruskan sesuatu urusan atau perkhidmatan yang tersebut dalam Peraturan 3 tanpa lesen atau
tidak mematuhi apa-apa syarat lesen tersebut adalah melakukan suatu kesalahan dan apabila
disabitkan boleh dikenakan denda tidak lebih daripada RM 50,000.00 (Ringgit Lima Puluh Ribu)
atau penjara selama tempoh tidak lebih daripada dua (2) tahun atau kedua-duanya dan mengenai
sesuatu kesalahan yang berterusan ia boleh dikenakan denda lanjutan RM 1,000.00 (Ringgit Seribu)
tiap-tiap satu (1) hari atau sebahagian daripada satu (1) hari kesalahan itu berterusan selepas hari
pertama sabitan itu direkodkan;
12. Kelulusan ini bukan satu perjanjian/jaminan bahawa syarikat tuan akan dipanggil untuk menyertai
tender atau sebutharga oleh PETRONAS atau anak-anak syarikatnya;
13. Syarikat ini sama ada secara dengan sendirinya, melalui pekerja-pekerjanya, pengarah-pengarahnya,
agen-agennya atau kakitangan-kakitangannya:a. Tidak dibenarkan menggunakan logo titisan minyak (oil drop) PETRONAS atau perkataan
"PETRONAS" atau menggunakan sebarang tanda, logo atau perkataan atau memakai gaya
cetakan (typeface), gaya huruf (font), rupa atau warna yang menyerupai cap-cap dagangan
yang dimiliki atau yang digunakan oleh PETRONAS ataupun anak-anak syarikatnya ("cap-cap
dagangan PETRONAS") dalam sebarang bentuk sekalipun sama ada pada bahan cetakan, laman
web ataupun papan tangan; dan
b. Tidak dibenarkan melakukan apa-apa perbuatan atau dalam apa-apa cara sama ada secara
langsung atau tidak langsung mengaku bahawa ia adalah rakan kongsi atau mempunyai
sebarang kaitan/hubungan dengan PETRONAS dan/atau anak-anak syarikatnya,
MELAINKAN DAN KECUALI Syarikat ini dibenarkan menggunakan rujukan [Syarikat] ini
dilesenkan oleh PETRONAS [No. lesen], di bawah Peraturan 3 Peraturan-peraturan Petroliam
1974.
14. Lesen ini boleh dibatalkan, digantung atau disenaraihitamkan pada bila-bila masa jika mana-mana
syarat di atas, syarat-syarat am pelesenan dan pendaftaran PETRONAS dan syarat-syarat lain yang
terkandung didalam Panduan Am Permohonan Lesen dan Pendaftaran PETRONAS tidak dipatuhi.
Muka Surat
2/3
NAMA SYARIKAT
: INFO-TRAX SDN BHD (229813-M)
NO LESEN
: 229813-M
TEMPOH SAH LESEN
: 07.09.2015 - 06.09.2018
ANNUAL AUDITED REPORT
ANNUAL AUDITED REPORT
PRINCIPAL APPOINTMENT
COMPANY OTHERS
L/R
L
L
L
L
L
SYARAT KHAS LESEN
Syarikat dikehendaki mengemukakan salinan Laporan Kewangan Tahunan yang telah diaudit bagi tahun berakhir 31 Januari 2016 dan kedudukan "shareholders' funds" hendaklah
positif sebelum 01 November 2016. Kegagalan berbuat demikian akan mengakibatkan syarikat tidak lagi disenaraikan dalam "List of Licensed / Registered Companies (LLRC)"
PETRONAS
PETRONAS
Syarikat dikehendaki mengemukakan salinan surat perlantikan agensi yang eksklusif daripada prinsipal PROGNOST SYSTEM GMBH yang telah diperbaharui dan mengikut format
yang ditetapkan oleh PETRONAS sepertimana yang dinyatakan di dalam Panduan Am sebelum 30 April 2016. Kegagalan berbuat demikian akan mengakibatkan syarikat tidak lagi
disenaraikan dalam "List of Licensed/Registered Companies (LLRC)" PETRONAS bagi bidang yang berkaitan.
PETRONAS
BIDANG-BIDANG LESEN / PENDAFTARAN
BIDANG-BIDANG LESEN YANG DILULUSKAN
(Approved License Categories)
Kod Perkhidmatan / Bekalan
Bentuk Operasi
Nama Produk / Rig / Kapal
(Service / Supplier Code)
(Mode of Operation)
(Bila Mana Berkaitan)
PI1090500
AGENT
PROGNOST SYSTEM GMBH
INSTR-MONITORING EQUIP-MACHINERY CONDITION MONITORING SYSTEM
PO1120106
DEALER
NOT APPLICABLE
OFFICE/RESIDENTIAL/OPERATIONAL EQUIP & SUPPLIES-LABORATORYLABORATORY EQUIP-GENERAL LABORATORY EQUIP/APPARATUS (Reclassified
from PO1120100-OFFICE/OPERATIONAL EQUIP-LABORATORY-EQUIP)
SG3010500
SELF-OPERATED
NOT APPLICABLE
GEOMATICS SERVICES-GENERAL SURVEY-3-D STRUCTURAL SURVEY (SE3050000
reclass to SG3010500)
SM5120300
SELF-OPERATED
NOT APPLICABLE
MECHANICAL ENG MAINT-ACOUSTIC INSULATION WORK
SS1020100
SELF-OPERATED
NOT APPLICABLE
SPECIAL CATEGORIES MAINT-CBM DATA
COLLECTION,MONITORING&ANALYSIS (Reclassified from SS1020200-SPECIAL
CATEGORIES MAINT-LUBE OIL ANALYSIS)
REMARK
SS1020100
Tarikh Lulus /
Masa
08.10.2015
12:39:14
07.09.2015
09:18:22
Tarikh Tamat
07.09.2015
09:18:22
06.09.2018
08.10.2015
12:39:13
08.10.2015
12:39:14
06.09.2018
06.09.2018
06.09.2018
06.09.2018
VDP / OTHERS
Excluding East Malaysia Operation (VDP)
*** TAMAT ***
Sijil ini dicetak oleh komputer dan tandatangan pihak Petronas tidak diperlukan.
Muka Surat
3/3
_________________________________________________________________________________________________________________________________________________________________
APPENDIX #2: ISO CERTIFICATION
Tel: +603 4270 2447 Fax: +603 42702616

Company Profile - INFO

Transcription

Similar documents

Ciessetrade – Laser Division

Diapositiva 1

desktop

transfer - Bihler.de

Cyonics 2201 manual - LaserFX.com Home Page

G4. 140R 140RS GP4. 140R 140RS

Rexel ClassicCut CL200, CL410 and CL420 Manual

Holmium Laser Enucleation of Prostate Analisi