ASEM Industrial PC`s USER`S GUIDE addendum

Transcription

ASEM Industrial PC’s
USER’S GUIDE addendum
ELO Touchscreen
driver installation & calibration
Code 86000042
Version A00
Date 19.07.2012
ii
Revisions
Revisor
Thei
Thei – Di Fonzo
Date
19.07.2012
19.07.2012
Release
ES Draft
A00
iii
Summary
Preliminary Information ...................................................................................................................................................................................... 1
General notes .................................................................................................................................................................................................. 2
Instructions on disposal ................................................................................................................................................................................... 2
Technical support & repairs ............................................................................................................................................................................. 3
Driver installation & calibration procedure .......................................................................................................................................................... 5
Step by step driver installation ......................................................................................................................................................................... 6
Step by step calibration procedure ................................................................................................................................................................. 16
ELO touchscreen driver installation & calibration
User’s guide
CHAPTER 1
Preliminary
Information
 General notes.
 Instructions on disposal.
 Technical support & repairs.
1
CHAPTER 1 – Preliminary Informations
2
General notes
The information in this manual is subject to change and is in no way binding upon
ASEM S.p.A.
ASEM S.p.A. is not responsible for technical errors or other omissions in the manual, and shall not accept any responsibility deriving from its use.
All brands and product names mentioned in this manual are trademarks of their
respective owners.
ASEM’s products are compliant with European Directive 89/336/EEC concerning
electromagnetic compatibility and Directive 73/23/EEC concerning the safety of
electrical products, and subsequent variations.
Instructions on disposal
IT
Il simbolo
sul prodotto o sulla confezione indica che il prodotto non deve essere considerato come un normale rifiuto domestico, ma deve essere portato nel
punto di raccolta appropriato per il riciclaggio di apparecchiature elettriche ed
elettroniche. Provvedendo a smaltire questo prodotto in modo appropriato, si
contribuisce a evitare potenziali conseguenze negative per l’ambiente e la salute,
che potrebbero derivare da uno smaltimento inadeguato del prodotto. Per informazioni più dettagliate sul riciclaggio di questo prodotto, contattare l’ufficio
comunale, il servizio locale di smaltimento rifiuti o il fornitore da cui è stato acquistato il prodotto.
The symbol
on the product or in its packaging indicates that this product
EN may not be treated as household waste. Instead it shall be handed over the applicable collection point for the recycling of electrical and electronic equipment. By
ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human healt, which could otherwise be caused by inappropriate waste handling of this product. For mor detailed information about reciclyng of this product, please contact your local city
office, your housechold waste disposal service or the supplier where you purchased the product.
Le symbole
sur le produit ou son emballage indique que ce produit ne peut
FR être traitè comme décher ménager. It doit être remis au point de collecte dèdié à
cet effect (collect et recyclage du matèriel èlectrique et èlectronique). En procèdant à la mise à la casse règlementaire de l’appareil, nous prèservons
l’environnement et notre sécurité, s’assurant ainsi que les dèchets seront traitès
dans des conditions appropriées. Pour obtenir plus de dètails sur le recyclage de
ce produit, veuillez prendre contact avec les services de votre commune ou le distributeur où vous avez effectué l’achat.
User’s guide
3
DE
Das Symbol
auf dem Produkt oder seiner Verpackung weist darauf hin, dass
dieses Produkt nicht als normaler Haushaltsabfall zu behandeln ist, sondern an
einem Sammelpunkt für das Recycling von elektrischen und elektronischen Geräten abgegeben werden muss. Durch ihren Beitrag zum korrekten Entsorgen dieses Produkts schützen Sie die Umwelt und die Gesundheit Ihrer Mitmenschen.
Umwelt und Gesundheit werden durch falsches Entsorgen gefährdet. Weitere Informationen über das Recycling dieses Produkts erhalten Sie von Ihrem Rathaus,
Ihrer Müllabfuhr oder den Distributoren, in dem Sie das Produkt gekauft haben.
ES
PT
El simbolo
en el producto o en su embalaje indica que este producto no se
puede tratar como desperdicios normales del hogar. Este producto se debe entregar al punto de recolección de equipos eléctricos y electrónicos para reciclaje.
Al asegurarse de que este producto se deseche correctamente, usted ayudará a
evitar posibles consequencias negativas para el ambiente y la salud pública, lo
qual podria ocurrir si este producto no se manípula de forma adecuada. Para obtener informaciónes mas detalladas sobre el reciclaje de este producto, póngase
en contacto con la administraciòn de su ciudad, con su servicio de desechos del
hogar o con el surtidor donde comprò el producto.
O simbolo
no produto ou na embalagem indica que este producto não pode
ser tratado como lixo doméstico. Em vez disso, deve ser entregueado ao centro
de recolha selectiva para a reciclagem de equipamento electrico e electronico. Ao
garantir uma eliminação adequada deste produto, ira ajudar a evitar eventuais
consequencjas negativas para o meio ambiente e para a saude publica, que, de
outra forma, poderiam ser provocadas por un tratamento incorrecto do produto.
Para obtener informações mais detalhadas sobre a reciclagem deste produto,
contacte os serviços municipalizados locais, o centro de recolha selectiva da sua
area de residência ou no distribuidor onde adquirir ou produto.
Technical support & repairs
ASEM offers wide-ranging, complete after-sales technical support. The staff who
deal with this handle questions on the entire range of products skilfully, quickly,
and efficiently.
You can phone our staff in the service department, and they will give you complete, prompt advice on how to resolve your problems.
telephone:
fax:
e-mail:
+39 0432 967435
+39 0432 967480
suptec@asem.it
CHAPTER 1 – Preliminary Informations
4
User’s guide
CHAPTER 2
Driver installation &
calibration procedure
 Step by step driver installation.
 Step by step Calibration procedure.
5
CHAPTER 2 – Driver installation & calibration procedure
Step by step driver installation
Figure 1
Step 1 - ELO driver installation
Figure 2

Run Elo XP2k 4.6.3 file.

Unzip all files.
6
User’s guide
Figure 3

Confirm unzipped files.

Install default language.
Figure 4
7
Figure 5

Select USB Drivers if USB interface is present.

Confirm license agreement.
Figure 6
8
User’s guide
Figure 7

Installation in progress.

Setup complete.
Figure 8
9
Figure 9

Restart Computer if request.

Press Finish to calibrate touchscreen.
Figure 10
10
User’s guide
Figure 11

Elo Icon in Control Panel shows the touchscreen status (USB connection ).

Select serial driver if serial interface is present.
Figure 12
11
Figure 13

Confirm license agreement.

Search ELO serial port.
Figure 14
12
User’s guide
Figure 15

Wait for serial port number.

Confirm serial port detected (for example COM1).
Figure 16
13
Figure 17

Select the serial port detected and press next.

Installation in progress.
Figure 18
14
User’s guide
15
Figure 19

Press finish to calibrate the touchscreen.

Elo Icon in Control Panel shows the touchscreen status (in this example serial connection).
Figure 20
Step by step calibration procedure
The calibration procedure is common for USB & Serial touchscreen.
Figure 21
Step 1 - ELO calibration procedure

Touch the red circle as in figure 42.

Figure 22
16
User’s guide
Figure 23


Figure 24
17
Figure 25
Step e serial/usb – Setup complete
18
Index of figures
Figure 1 Step 1 - ELO driver installation .............................................................................................................................. 6
Figure 9 Step 9 - ELO driver installation ............................................................................................................................ 10
Figure 10 Step 10 - ELO driver installation ........................................................................................................................ 10
Figure 21 Step 1 - ELO calibration procedure .................................................................................................................... 16
ASEM S.p.A.
Via Buia, 4
33011 Artegna (UD) Italy
Tel. +39/0432-9671
Fax. +39/0432-977465
Via Prealpi, 13/A
20034 Giussano (MI) Italy
Tel. +39/0362-859111
Fax. +39/0362-859121
asem@asem.it
www.asem.it

ASEM Industrial PC`s USER`S GUIDE addendum

Transcription

Similar documents

1° Festival scacchistico Città di Valenzano

Xerox® WorkCentre® 3315/3325 Quick Use Guide

inspired form and function

VA/200 istr. nuove

P68 VARIANTS SERVICE INSTRUCTION No. 84

catalogue

DESIGNED WITH ONE RELENTLESS FOCUS THE

since 1959 - F.lli Franchini

fluxi 2000/tz - Heat Hungary

Guida classe 4 - Bubbles Magazine

Padiglione Hall Halle

Saitek evo - Saitek.com

Calibration estimation using exponential tilting in sample surveys Jae Kwang Kim

GT4 Championship

Pekoteko - Familienforschung von Bernhard Pabst