Starrett Precision Hand Tool Promo

Promo 2016.2C
PRECISION HAND TOOL PROMOTION
Micrometers
124 INSIDE MICROMETER
•Insulated rods marked with length
•Adjustable for length
•6-1/2" (165mm) long handle is available
•Measuring rods are solid
•Graduations: .001"
Cat. No.
124AZ
124DZ
124MAZ
124MDZ
EDP
50542
50554
56141
56144
Range
2-8"
2-32"
50-200mm
50-800mm
124AZ
Screw Movement
1/2"
1/2" and 1" (2 heads)
13mm
13mm and 25mm (2 heads)
210 SCREW THREAD COMPARATOR MICROMETER
•60° conical anvil, spindle faces with 1/64" (0.4mm)
flats on the ends of the points
•Extremely hard and stable one-piece spindle
•Advanced sleeve design with staggered lines and
distinct figures for precise, easy readability
•Balanced frame design for comfortable, accurate measuring
Spacing Collars
Rods
One 1/2"
6
Set 124A and 124C
One 12mm
6
Comprised of set 124MA and 124MC
Sale Price
304.10
958.27
304.10
958.27
220 MUL-T-ANVIL MICROMETERS
•Handles a wide variety of measurements impossible to
obtain with regular micrometers
•Rigid one-piece frame of drop forged steel
•Extremely hard and stable one-piece spindle
•Micro-lapped measuring faces
210AP
Cat. No.
210AP
EDP
50731
Range
0-7/8
Grad.
0.001
220XFL-1
Accuracy Sale Price
±.002"
199.60
Cat. No. EDP
220XFL-1 50746
Range
0-1"
Grad.
.001"
Accuracy
±.0002"
224 INTERCHANGEABLE ANVIL MICROMETERS
•Suitable wrenches are furnished to make necessary adjustments
•Combination ratchet and speeder for uniform pressure and
quicker adjustment
•Advanced sleeve design with staggered lines and distinct figures for
precise and easy readability
Cat. No.
224AARLZ
224ARLZ
224.1BRLZ
224.1GRLZ
224.1CRLZ
224.1DRLZ
224.1ERLZ
224.1JRLZ
224MAARLZ
224MARLZ
224.1MGRLZ
224.1MDRLZ
EDP
50770
50772
72700
72704
72701
72702
72703
72705
50771
50773
72708
72706
Range
0-4"
2-6"
6-9"
6-12"
9-12"
12-16"
16-20"
20-24"
0-100mm
50-150mm
150-300mm
300-400mm
Grads.
.001"
.001"
.001"
.001"
.001"
.001"
.001"
.001"
0.01mm
0.01mm
0.01mm
0.01mm
*Standards included
2
Prices effective June 15 - August 31, 2016 | Specifications subject to change.
Sale Price
319.77
224AARLZ
Standards*
1", 2", 3"
2", 3", 4", 5"
6", 7", 8"
6", 7", 8", 9", 10", 11"
9", 10", 11"
12", 13", 14", 15"
16", 17", 18", 19"
20", 21", 22", 23"
25, 50, 75mm
50, 75, 100, 125mm
150, 175, 200, 225, 250, 275mm
300, 325, 350, 375mm
Sale Price
538.18
591.47
784.80
1,170.40
889.30
1,102.48
1,367.91
1,611.39
602.97
610.28
1,170.40
1,123.38
Cat. No.
430XLZ-1
Range
Mic.
0-1"
EDP
72533
Resolution
Mic.
.0001"
Indic.
±.0020"
T444 OUTSIDE MICROMETERS
New!
•No-glare satin chrome finish, which resists rust
•Advanced sleeve design with staggered lines and
distinct figures for precise and easy readability
•Balanced frame and thimble design to ensure easy
handling and better readability
•Insulated frame for prevention of temperature related
expansion and contraction
•Provides quick and easy adjustment
•Reading in ten-thousandths of an inch (.0001") with
vernier scale on the sleeve
New!
430XLZ-1
Indic.
.00005"
Sale Price
960.20
Micrometers
430 INDICATING MICROMETER
•Retractable, quick release anvil for uniform, consistent, and fast measurement
•Insulated frame to prevent thermal expansion/contraction
•Balanced frame and thimble design for ease of use
•Carbide measuring finish on anvils
•Friction thimble
•Satin chrome finish for rust and glare resistance
•Spindle lock
•Supplied with custom wooden case
445 DEPTH MICROMETERS
•Depths of holes, slots, shoulders and projections can
be measured to .001" (0.01mm)
•Furnished with choices of 3" (75mm), 4" (100mm), and
6" bases and have 5/32" (4mm) diameter measuring rods
•Combination ratchet and speeder for uniform pressure
and quicker adjustment
•Ring-type lock nut for quick and sure locking
T444.1XRL-1
445AZ-6RL
Cat. No.
T444.1XRL-1
T444.1XRL-2
T444.1XRL-3
T444.1XRL-4
T444.1XRL-5
T444.1XRL-6
EDP
52083
52084
52085
52086
52087
52088
Range
0-1"
1-2"
2-3"
3-4"
4-5"
5-6"
Grads.
.0001"
.0001"
.0001"
.0001"
.0001"
.0001"
Sale Price
125.40
146.30
161.98
187.06
202.73
225.72
Cat. No.
445AZ-3RL
445AZ-6RL
445AZ-9RL
445AZ-12RL
445BZ-3RL
445BZ-6RL
445BZ-9RL
445BZ-12RL
EDP
52208
52212
52216
67117
52220
52224
52228
67118
486 BLADE TYPE MICROMETERS
•The blades are .030" (0.8mm) thick
•Blades will measure to 5/16" (8mm) depths
•Balanced frame and thimble design ensure easy handling and better readability
•Speeder for quicker adjustment on all sizes
Cat. No.
486P-1
486P-2
486P-3
486P-4
EDP
52499
52501
52503
52505
Range
0-1"
1-2"
2-3"
3-4"
Range
0-3"
0-6"
0-9"
0-12"
0-3"
0-6"
0-9"
0-12"
Sale Price
297.83
359.48
445.17
597.74
319.77
376.20
469.21
621.78
486P-1
Sale Price
488.02
503.69
517.28
545.49
starrett.com
3
Micrometers
762 ELECTRONIC MICROMETER HEADS
•Starrett satin chrome finish - no glare - resists rust on all reading surfaces
•Extremely hard and stable one-piece spindle (the heart of our accuracy and long life)
•Micro-lapped measuring face for flatness and squareness
•Inch/millimeter conversion
•PRESET button to install any reading at any position
•Measurement HOLD button
•RS232 data output port
Cat. No.
762XFL
762XFL-2
762MEXFL-25
762MEXFL-50
Range
in
0-1
0-2
0-1
0-2
EDP
65058
65062
66077
66137
mm
0-25
0-50
0-25
0-50
Sale Price
509.96
775.39
509.96
775.39
3732 ELECTRONIC MICROMETERS
Without Output
•Balanced frame design for comfortable and accurate measuring
•Large, easy-to-read, high-contrast LCD digital readout
•No-glare black wrinkle finish on frame
•Hard and stable one-piece friction thimble permits
one-hand operation of micrometer and uniform
contact pressure
Cat. No.
3732XFL-1
3732XFL-2
3732XFL-3
3732XFL-4
EDP
12268
12269
12270
12271
Range
0-1"
1-2"
2-3"
3-4"
762XFL-2
Resolution
0.00005"
0.00005"
0.00005"
0.00005"
3732XFL-1
Accuracy
± 0.0001"
± 0.0001"
± 0.0001"
± 0.00015"
3206 OUTSIDE MICROMETER STAND
•Converts outside micrometers to a sturdy bench gage for batch inspection of small parts
•Useful as a handy bench vise or assembly fixture
•Secure gripping surfaces
•Ball joint construction allows head to be positioned as much as 30° off perpendicular in any direction
•Positive lock on the base
•Base Dimensions: 6-3/8" long x 3-1/2" wide x 3/4" thick (162mm long x
89mm wide x 19mm thick)
•Tilting head clamping: 3/4" thick x 1" throat depth (19mm thick x 25mm
throat depth)
•Accommodates all Starrett 1/2" (13mm) and 1" (25mm) outside
micrometers, 2 and 2A 2" Outside Micrometers and 210, 220, 483, 485,
569 Special Purpose Outside Micrometers
Cat. No.
3206
4
EDP
68917
Prices effective June 15 - August 31, 2016 | Specifications subject to change.
Description
Outside micrometer stand
Sale Price
163.02
221.54
282.15
314.55
3206
Sale Price
125.40
Cat. No.
798A-6/150
798A-8/200
798A-12/300
798B-6/150
798B-8/200
798B-12/300
798BX-6/150
EDP
20798
20799
20800
12521
12523
12525
12782
Range
6"
8"
12"
6"
8"
12"
0-6"
798A-6/150
Resolution
.0005"
.0005"
.0005"
.0005"
.0005"
.0005"
.0005"
Output
x
x
x
x
EC799 ELECTRONIC CALIPERS
•Lightweight, ergonomic design
•Inch/millimeter conversion reads .0005" or 0.01mm
•Easy access to the single, long-life battery
•Last measuring position retained when shut off
•Hardened stainless steel body for long life
•Find adjustment thumb wheel
•Lock screw to hold the slide in position
•Resolution: .0005" (0.01mm)
•Zero at any position
Cat. No.
EC799A-6/150
EC799A-8/200
EC799A-12/300
EC799B-6/150
EC799B-8/200
EC799B-12/300
EDP
00142
00145
00148
00143
00146
00149
Range
0-6"
0-8"
0-12"
0-6"
0-8"
0-12"
Slide Calipers
798 ELECTRONIC CALIPERS
•IP67 level of protection against, coolant, dirt and dust
•With and without output
•Fine adjustment
•Hardened stainless steel measuring surfaces
•Large, easy-to-read, high contrast LCD digital readout
Sale Price
246.62
313.50
466.07
295.74
358.44
531.91
415.91
New!
EC799A-6/150
Output
Sale Price
187.06
264.39
395.01
241.56
319.67
452.51
x
x
x
3202 SLIDE CALIPERS
•Provide quick accurate measurement of O.D. and depth
•Sharp, clear dial graduations
•Sharp, black graduations on satin finished bar
•Hardened stainless steel
•Lock screws for sliding jaw and dial bezel
New!
3202-6
Cat. No.
3202-6
3202-8
3202-12
EDP
61467
61468
61466
Range
0-6"
0-8"
0-12"
Grads.
.001"
.001"
.001"
Sale Price
121.22
171.38
249.76
starrett.com
5
Depth and Height Gages
3752 ELECTRONIC HEIGHT GAGE
•Clear bar graduations in .100" and 5mm increments
•Large .380" (9.65mm) easy-to-read LCD display - reads to .0005" or 0.01mm
•Instant inch/millimeter conversion
•Carrier and scriber designed to read from zero
3752-12/300
Cat. No.
3752-12/300
3752-24/600
EDP
68815
68816
Range
0-12"
0-24"
Resolution
.0005"
.0005"
Sale Price
961.40
1,576.91
3753A ELECTRONIC DEPTH GAGES
Without Output
•Clear, easily-read number, properly sized for the tool
•Hardened stainless steel body and slide for long life
•Fine adjustment thumb roll for precision measurements
•Lock to hold slide in position
3753A-6/150
Cat. No.
3753A-6/150
3753A-8/200
3753A-12/300
EDP
12258
12259
12260
Range
0-6"
0-8"
0-12"
Resolution
.0005"
.0005"
.0005"
Accuracy
±.001"
±.001"
±.001"
Sale Price
338.58
353.21
427.41
3753B ELECTRONIC DEPTH GAGE
With Output
•Hardened stainless steel bar for long life
•Removable hook attachment for measurements from the edge of the slots, grooves, etc.
•Lock to hold the slide in position
•Fine adjustment thumb roll for precision measurements
•Large, easy-to-read LCD, .310" character height
•Induction type linear encoder system
•Patented non-contact RS-232 data output
•CR2032 3-volt battery (>year battery life under normal use)
•In/mm conversion
3753B-6/150
•Zero at any position
6
Cat. No.
EDP
Range
Description
3753B-6/150
12690
0-6"
Depth gage in case
Prices effective June 15 - August 31, 2016 | Specifications subject to change.
Sale Price
422.18
196 UNIVERSAL BACK PLUNGER DIAL INDICATORS
•One of the most versatile indicators available
•Accurate and reliable
•Simple to operate
•Range: .200" (5mm)
•Graduations: .001" (0.02mm)
Indicators
81 DIAL INDICATORS
•Shockless, hardened steel gear train and jewel bearings
•Furnished with a lug-on-center back
•Anti-magnetic and special non-shock mechanisms are
options available for all models
•Double row figure dials
•Graduations: .001"
196A1Z
81-111J
Cat. No.
81-111J
81-211J
81-136J
81-131J
81-231J
81-145J
81-141J
81-241J
EDP
53378
53414
53392
53388
53420
53410
53400
53428
Dial Reading
0-5-0
0-10
0-15-0
0-25-0
0-50
0-25-0
0-50-0
0-100
Range
.025"
.025"
.075"
.125"
.125"
.125"
.250"
.250"
Sale Price
291.56
291.56
199.60
177.65
177.65
177.65
177.65
177.65
Cat. No.
196A1Z
196B1
196A6Z
196B6
196A5Z
196B5
196MA1Z
196MB1
EDP
50697
50699
50701
50702
50714
50717
65251
65252
Reading
0-100
0-100
0-100
0-100
0-50-0
0-50-0
0-100 Yellow dial face
0-100 Yellow dial face
Sale Price
290.51
167.20
338.58
217.36
290.51
169.29
300.96
194.37
2900 ELECTRONIC INDICATORS
New!
•True Absolute Sensor Techology - remembers position and zero set point even during battery replacement.
Cannot be "over-sped" into failure.
•Intuitive design and layout - easy to learn and use
•Positive, tactile-feel button activiation
•IP67 protection against dirt, dust, water and coolant to withstand hostile shop environments
Cat. No.
2900-1
2900-4
2900-3-1
2900-5-1
2900-6-1
EDP
09980
09983
09963
09967
09969
Range
.5"
.5"
1"
1"
1"
Resolution
.00005"
.0005"/.0001"/.00005"
.0005"
.0005"
.0005"/.0001"/.00005"
Accuracy
±.00012"
±.001"
±.001"
±.001"
±.00012"
Sale Price
376.20
482.79
339.63
482.79
665.67
3670 DIAL INDICATOR STANDS
•Designed for comparison measurements using a dial indicator or digital indicator
•Vertical fine adjustment is standard on all models
•8mm stem bushing included
•Can be used with any AGD dial or digital indicator
•Furnished with a serrated or flat anvil which is ground and lapped and removable
Cat. No.
3671
3672
3673
EDP
69901
69902
69903
Description
Stand with round, flat anvil
Stand with round, serrated anvil
Stand with square, serrated anvil
Sale Price
613.42
613.42
613.42
2900-1
New!
3671
* Indicator not included.
starrett.com
7
L3 SYSTEMS
Starrett L3 systems represent a new and easier solution for creating
a test; performing a test; analyzing your test results; and managing
test data.
L3 Systems meet the requirements of
today's research scientist, design engineer,
quality manager or technician responsible
for material characterization, verification and
validation.
L2 PLUS SYSTEMS
Designed for advanced force measurement and analysis, L2 Plus systems
are optimized for quality and engineering personnel. Test setup is intuitive,
efficient and non-compromising.
Like our L3 systems, L2 Plus measurements
and analysis are performed graphically.
Create high resolution graphs based on load,
distance, height and time. Then measure any
point or segment on your graph using a set of
analysis tools.
Force Measurement +
Material Testing
L2 SYSTEMS
S2 SYSTEMS
L2 systems operate using a Windows®-based table PC, load, distance
and time-based results are displayed in a large format for easy
interpretation. Graphical representation of each test can be displayed.
Data tables display results with tolerance and statistical
calculations. Standard reports are included, or export data for
use with other applications.
S2 systems are ideal for high-volume production testing, quality
control including incoming inspection verification and validation,
and research and design engineering. Our simple, fill-in-theblank test setups let you test and validate your springs
in as few as three steps allowing your testing to be
performed in seconds.
WATCH OUR INFORMATIONAL VIDEOS TO LEARN MORE
ABOUT OUR FORCE AND MATERIAL TESTING SOFTWARE!
Turnkey system solutions for material testing, force analysis and force measurement. Our systems distinguish
themselves from the competition by making it easy to create and perform a test, and manage test results. We offer
a full range of test frames, software, load cell sensors, test fixtures and more.
Bore Gages
78XT BORE GAGES
•Wide measurement range without changing anvils
•Tungsten carbide measuring faces
•Ratchet stop
•Self-centering contacts
•Blide bore measuring capability
•Extensions available up to 6" (150mm)
•Setting rings included
•Furnished in a case, complete with setting ring, contacts, wrenches, and instructions
Cat. No.
78XTZ-100
78XTZ-312
78XTZ-375
78XTZ-500
78XTZ-625
78XTZ-750
78XTZ-1
78XTZ-138
78XTZ-2
78XTZ-258
78XTZ-5
78XTZ-8
78XTZ-9
EDP
68124
68129
68130
68131
68132
68133
68134
67674
67675
67676
67679
67682
67857
Range
.080"-.100"
1/4"-5/16"
5/16"-3/8"
3/8"-1/2"
1/2"-5/8"
5/8"-3/4"
3/4"-1"
1"-1-3/8"
1-3/8"-2"
2"-2-5/8"
4"-5"
7"-8"
8"-9"
New!
78XTZ-100
Accuracy
.00010"
.00015"
.00015"
.00015"
.00015"
.00015"
.00015"
.00015"
.00020"
.00020"
.00025"
.00030"
.00030"
Sale Price
2,101.50
877.80
826.60
831.82
783.75
807.79
911.24
1,262.36
1,288.49
1,583.18
2,187.19
4,665.93
4,745.35
84A DIAL BORE GAGES
•Can be easily held to inspect bores and hole sizes without removing the workpiece
•Adjustable range screw and two centralizing plungers are of hardened tool steel for wear and
spring-loaded for sensitivity
•The housing and knurled handle are aluminum for light weight and good balance
•Furnished in finished wood case
Cat. No.
84AZ-111-4J
84AZ-111-5J
84AZ-134-5J
84AZ-111-6J
84AZ-134-6J
84AZ-111-7J
84MAZ-161-4J
84MAZ-181-4J
84MAZ-161-5J
EDP
00026
00027
00031
00028
00032
00029
00034
00038
00035
Range
1-1/2"-3"
3"-5-1/16"
3"-5-1/16"
5"-8"
5"-8"
8"-12-1/2"
3.175-76.2mm
3.175-76.2mm
76.2-128.58mm
770 ELECTRONIC BORE GAGES
•Larger and clearer LCD display
•Updated electronics
•Standard proximity output
•Simple two button operation
•4 preset memories
Bore Depth
3"
6"
6"
6"
6"
7"
75mm
75mm
150mm
New!
Sale Price
1,301.03
1,283.26
1,235.19
1,426.43
1,297.89
1,631.25
1,355.37
1,328.20
1,294.76
84AZ-111-5J
3089 DIAL BORE GAGES
•All anvils laser marked for easy selection
•Gage chart for quick and easy anvil selection
•Includes sturdy aluminum case with cut outs
for gage and all accessories
•Ergonomic design with non-slip
insulating grip
•Resolution: .0005"
3089Z-131-715J
770XTZ-1
Cat. No.
770XTZ-1
10
EDP
72603
Range
3/4 - 1"
Sale Price
2,808.49
Prices effective June 15 - August 31, 2016 | Specifications subject to change.
Cat. No.
EDP
3089Z-131-1424J 12457
3089Z-131-26J
12458
Range
1.4"-2.4"
2"-6"
Sale Price
282.15
314.55
Data Collection
DATASURE® WIRELESS DATA COLLECTION
DataSure® Facts
•DataSure® Wireless Data Collection consists of three primary components:
•Miniature radios (End Nodes) attached to the data output port of an electronic tool
•A Gateway that connects to a PC
•Routers extend the system's range and make the network more robust
A Comprehensive, Robust Solution
•Works in almost any environment
•Maintains data integrity in electronically noisy shops
•Data receipt confirmation signal
•DataSure® stores several readings
•DataSure® adapts to all major electronic measuring tools
•"IT" friendly and easily installs on a standard PC
Cat. No.
1500-2-N
1500-3A-1N
1500-3A-2N
1500-3A-3N
1500-3A-4N
1500-3A-5N
1500-3A-6N
1500-3A-7N
1500-3A-8N
1500-3A-9N
1500-3A-10N
1500-3A-11N
1500-3A-12N
1500-3A-13N
1500-3A-14N
1500-3A-15N
1500-3A-16N
1500-3A-18N
1500-3A-21N
EDP
12059
12530
12531
12532
12533
12534
12535
12536
12537
12538
12539
12540
12541
12542
12543
12544
12545
12565
00046
Description
Router, 916 MHZ, 120/240 VAC
End Node - Starrett Opto.
End Node - Starrett IP67 Micrometer
End Node - Starrett 3rd Generation
End Node - Starrett 2700 Indicator
End Node - Starrett 2000/2001/3752
End Node - Mitutoyo 6-Pin
End Node - Mitutoyo without Absolute Encoder
End Node - RS232, Jumpered Port Pins
End Node - Mitutoyo IP66 Micrometer
End Node - Mitutoyo IP65 Micrometer
End Node - Digimatic WD/SUB 9 Pin
End Node - Universal 10 Pin Connector
End Node - Absolute Digimatic Indicator
End Node - Mahr Federal UMAXUM Indicator
End Node - Opto/Duplex
End Node - Mahr Federal EX
End Node - Starrett IP67 Caliper
End Node - Starrett 2900 Indicator
Sale Price
1,180.85
722.10
722.10
722.10
722.10
722.10
762.85
750.31
722.10
790.02
790.02
722.10
722.10
753.45
722.10
722.10
722.10
722.10
722.10
starrett.com
11
Gage Amps and Testers
SR160 SURFACE ROUGHNESS TESTER
New!
•Bluetooth Technology - Quick, reliable
communication between traverse and display/
control unit
•Tactile measurement button
•Detailed graph of measurement area
•Charge and transfer data through PC connection, main
charger and standard USB charger included
•Two-piece, breakaway construction for remote readings
3811A COMPACT HARDNESS TESTER
•Combines fast test speeds coupled with ample memory
and output
•Performs tests that easily convert to most popular hardness
scales such as Rockwell, Brinell, Vickers and Shore
•Designed to test the hardness of large, hard metal parts
•USB output
•Automatic conversions to Rockwell, Brinell, Vicker and Shore
•Automatic mean value as well as Min. and Max. values
SR160
3811A
Cat. No.
SR160
EDP
72584
Sale Price
2,343.41
3812 ULTRASONIC THICKNESS GAGE
•Menu-driven, multi-functional tester with basic
measurement capabilities
•Measures the thickness of metallic and non-metallic
materials such as aluminum, titanium, plastics,
ceramics and glass
•Accurately display readings in inch or millimeter
•Ideal for measuring a wall thickness that would be
difficult to gage with conventional hand tools
Cat. No.
3811A
EDP
69881
Sale Price
2,243.62
3814 ANALOG BENCH HARDNESS TESTER
•Ability to hand Rockwell Scales A through H and K
•Stable cast iron construction
•Ideal basic hardness testing for many typical applications
•Easy to use
3812
3814
Cat. No.
3812
12
EDP
67668
Sale Price
1,411.80
Prices effective June 15 - August 31, 2016 | Specifications subject to change.
Cat. No.
3814
EDP
67754
Sale Price
3,356.54
C604R PRECISION RULES
•Spring-tempered
•Satin chrome finish
•Quick reading
•Rules with double row of inch figures, and each edge
represents the bottom edge reading left to right (rules
1" and wider)
3020-3
C604R-24
Cat. No.
3020-3
3020-4
3020-6
3020-12
EDP
12225
12226
12227
12228
Length of Blade*
in
mm
2-31/32 75
3-31/32 100
5-29/32 150
12-1/32 300
Length of Beam
in
mm
Sale Price
1-31/32 50
88.83
2-31/32 75
111.82
3-29/32 100
163.02
6-7/8
175
335.45
*Length of blade from the inner edge of the beam to the end of the blade.
C493 PROTRACTOR AND DEPTH GAGE
•Angular measurement is from 0-180° in opposite
directions allowing the direct reading of angles and
supplementary angles
•Depths are measured from a 6" (150mm) blade
•Both tools have a flat surface on the back of the head
premitting laying the tool flat on paper or work
•No-glare satin chrome finish
Cat. No.
C604R-2
C604R-4
C604R-6
C604R-12
C604R-18
C604R-24
EDP
56465
56467
52678
52679
52680
52681
Length
6"
4"
6"
12"
18"
24"
Sale Price
22.99
26.13
28.22
47.55
90.92
119.13
Squares, Rules, protractors and Calipres
3020 TOOLMAKERS' SQUARE
•This high quality toolmakers' square is not graduated
and offers squareness accuracy to .0002" (0.05mm)
for every 6"
•They feature hardened, ground and lapped stainless
steel construction on both blade and beam
•Fitted case
79 "YANKEE" SPRING-TYPE CALIPERS
•Made from a high steel and well finished
•The bow spring, although flexible, is exceedingly strong
to assure reliability
•All sizes are available with either spring nut or solid nut
•The quick-adjusting, automatic-closing spring nut is
designed for making fast, positive adjustments
C493
79B-6
Cat. No.
C493
C493B
EDP
52532
52534
Blade Graduations
32nds, 64ths
32nds, 64ths
Sale Price
95.10
96.14
Cat. No.
79B-6
79B-8
79B-12
EDP
50367
50369
50373
Range
in
6
8
12
mm
150
200
300
Sale Price
64.79
98.23
104.50
starrett.com
13
Precision Shop Tools
S830 SMALL HOLE GAGES
•Hardened-ball measuring surface with two-point contact
•Smooth, sensitive adjustment for better feel, giving
more accurate measurements
•The adjustment of the gage beyond their range is
restricted by a safety stop that prevents breakage
S831 SMALL HOLE GAGES
•Hardened-ball measuring surface with two-point contact
•Smooth, sensitive adjustment for better feel, giving
more accurate measurements
•The adjustment of the gage beyond their range is
restricted by a safety stop that prevents breakage
S830FZ
Cat. No.
S830FZ
EDP
53081
Description
Set of 5 in case
S831EZ
Sale Price
259.16
Cat. No.
S831EZ
EDP
53087
Description
Set of 4 in case
Sale Price
198.55
167 RADIUS GAGE
•Made of satin finish stainless steel - rust and stain resistant
•Each gage is clearly marked with its radius
•Each gage has five different gaging surfaces for both convex and concave radii
•All gages have precision finished raddi wtih extra smooth, accurate edges
Cat. No.
S167CZ
S167CHZ
S167DZ
S167MCZ
S167MCHZ
SD167GZ
SD167GHZ
EDP
50618
50619
50620
55820
55821
63433
63463
Range
1/32"-17/64"; 9/32"-1/2"
1/64"-17/64"; 9/32"-1/2"
1/32"-1/2"
1-7mm; 8-15mm
0.5-7mm; 8-15mm
.010-.025mm; .030-.100mm
.120-.300mm; .350-.500mm
Gages
24
25
16
21
22
26
26
185 TIME SAVER® TAP AND DRILL GAGE
•Correct sizing of tap drill for any common size machine
screw in "NF" National Fine or "NC"
National Coarse Thread Series
•Leaves the right amount of stock for
approximately 65% full thread
•Shows correct drill body size
•60 holes with number sizes and
decimal equivalents
•Hardened tool steel construction
Sale Price
174.52
213.18
123.31
180.79
217.36
247.67
270.66
186 DRILL AND STEEL WIRE GAGE
•Widely used by mechanics for twist
drills and drill rod
•Similar to the 185, without the tap and
drill information
•60 holes from 1 to 60
•Marked with number sizes and
decimal equivalents
•Hardened tool steel construction
185
Cat. No.
185
14
EDP
50675
Sale Price
82.56
Prices effective June 15 - August 31, 2016 | Specifications subject to change.
S167CZ
Cat. No.
186
EDP
50676
186
Sale Price
79.42
C391 CENTER GAGE
•Extremely handy for use in grinding and setting screw
cutting tools
•Meet American National or U.S. 60°, Whitworth or
English 55°, and Metric 60° standards
•Very useful for finding number of threads per inch through
graduations in 14ths, 20ths, and 32nds of an inch
•Table of double depths of threads determining size of
tap drills
•Made of spring-tempered
steel with satin chrome finish
•Ground gaging surfaces
187
Cat. No.
187
EDP
50677
Sale Price
78.38
C391
Cat. No. EDP Description
Sale Price
C391
51475 American Unified National Standard, 60°
28.22
472 SCREW PITCH GAGE
•Consists of a substantial steel with a number of folding leaves at both ends,
each leaf having teeth corresponding to a definite pitch, marked on each leaf
•Locking device at both ends of the case, so leaves can be securely locked in
position for use
•Leaves have a special narrow design, permitting checking internal threads in
nuts, etc. as well as external threads
Cat. No. EDP
472
52484
Description
With locking device and 11-1/2 and 27 pipe thread pitches
Sale Price
94.05
473 SCREW PITCH GAGE
•Consists of a substantial steel case wtih a number of folding
leaves at both ends, each leaf having teeth corresponding to a
definate pitch, marked on each leaf
•Positive stop design at both ends of the cse in position for use
•Leaves have special narrow design, permitting checking
internal threads in nuts, etc., as well as external threads
Cat. No. EDP
473
52485
Description
With positive stop and 11-1/2 and 27 pipe thread pitches
Description
With locking device and 11-1/2 and 27 pipe thread pitches
472
473
Sale Price
55.39
474 SCREW PITCH GAGE
•Consists of a substantial steel case with a number of folding leaves at both
ends, each leaf having teeth corresponding to a definite pitch, marked on
each leaf
•Features a locking device at both ends of the case, so leaves can be
securely locked in position for use
•Leaves have a special narrow design, permitting checking internal threads
in nuts, etc., as well as external threads
Cat. No. EDP
474
52486
Fixed Gage Standards
187 JOBBERS' DRILL GAGE
•Quick sizing of any twist drill from
1/16"-1/2" by 64ths
•29 holes marked with drill size
inches and decimal equivalents
•Rigidly tested after hardening
•Black matte finish with gage
information steel stamped on one
side and white marked on reverse
side for quick, clear reading
Sale Price
50.16
474
starrett.com
15
PROMO 2016.2C
THE L.S. STARRETT COMPANY - CORPORATE HEADQUARTERS
Phone: (978) 249-3551 | Fax: (978) 249-8495
121 Crescent Street - Athol, MA 01331 - USA
starrett.com
Promotion valid through June 15 - August 31, 2016.
Promo 2016.2C 05/16
5M/Q The L.S. Starrett Company 2016©
Specifications subject to change.