3-Pc Shaker Set - Digital Marketing Services

Transcription

SOMMERFELD’S TOOLS
For Wood
Online: www.sommerfeldtools.com
3-Pc Shaker Set
Create simple, attractive 22-1/2˚ beveled
raised panels for mission or Shaker style
furniture and cabinets
s
The stile and rail cutters cut a perfect 7/32”
slot which creates a perfect fit for today’s ¼”
undersized plywood - no more loose-fitting
panels.
s
If you want a raised panel, our raised panel
cutter also creates the same 22-½˚ straight bevel.
The panel cutter is also preset to make a 7/32”
groove in the stiles and rails.
s
The panel cutter can also be shimmed to
increase the size of the panel to standard ¼” to
use with your standard stile and rail cutters.
s
Box has flush-mounted magnetic catch.
T
s
his is the set you have been waiting for if you want
to build Mission-style furniture or cabinets. The
new 22-½˚ beveled profile on the pattern cut gives
that simple Shaker look for your Mission-style doors,
cabinets, or furniture.
Stile and rail cutters have a 7/16” engagement.
All of our bit sets are packaged in a beautiful,
custom-designed hardwood case to keep your
bits safe, clean and easy to find for many years of
service.
“Today I
built two
Shaker d
with you
oors
rS
start to fi haker set. From
nish, incl
uding cu
the stock
tting
, it took m
e less th
30 minu
an
tes
I could n to build both doo
ot
rs
purchase. be happier with m .
y
Y
highest q our products are
the
ual
to get wh ity. It’s nice for o
nce
at I pay fo
r!”
HALF-PRICE
TOTAL VALUE: YOU SAVE: $179.80
$ 29.90
YOUR COST:
$149.90
R.J., New
ton, NC
HOW-TO DVD
With Bit Set Purchase
A $9.90 VALUE
Yours for only $4.90
Shaker
Pattern
DVD: DVDS5
Shaker
Panel-Cutter with Back
Cutter
Shaker Cope
ITEM
Description
See Page
Shank Dia.
Bearing
Sale
01005
1/2” Shank Shaker Raised Panel Cutter w/ Back-Cutter
65
1/2”
688ZZ
$89.90
02002
1/2” Shank Shaker Pattern / Cope Cutters (2 Bits)
-
1/2”
608ZZ
$89.90
03005
3-Pc Shaker Raised Panel Set
-
1/2”
-
$149.90
Toll Free Order Line: 1-888-228-9268
15
TM
For Wood
Order Line: 1-888-228-9268
TM
3-Pc Tongue & Groove Cabinetmaking Set
Build stronger, better-fitting cabinets with less work, using Marc
Sommerfeld’s fail-safe Cabinetmaking System and these bits
HALF-PRICE
This special matched set of bits is the very foundation of Marc’s
work-saving, common sense approach to cabinetmaking. The
way you build cabinets is about to change!
O
ur woodworking, cabinetmaking, and
furniture-making tools in this country
were all derived from Europe. The joints
that were mainly used are mortise and tenon,
tongue and groove, and stile and rail – all strong
joints that take time to construct. The building
of cabinets in the United States has evolved
into the use of simple butt joints done by face
nailing or pocket screwing. These joints may
appear to be faster and easier to construct, but
are most certainly not as accurate, nor as strong,
and they are much more unsightly than the old
traditional ones.
A $9.90 VALUE
DVD: DVDS4
Box has flushmounted
magnetic catch.
changing out of bits if necessary without adjusting the router.
Note: use SOMMERFELD’S rubber grommet in doing this. See DVD
Cabinetmaking Made Easy.
Every Tongue & Groove joint, no matter where it is used in the
construction process, will automatically line up, fitting flush.
All of our bit sets are packaged in a beautiful, custom-designed
hardwood case to keep your bits safe, clean and easy to find for
many years of service.
Machines materials from ¾” to 1-1/8” thick
s
s
s
With the Sommerfeld’s Tongue & Groove
Cabinetmaking Set, we came up with a system
that combines the best of that Old world
joinery with our New World tooling. The results
of this new method now make your cabinets
not only stronger, but much more accurate,
plus assuring you of that all-important hidden
interlocking joint, along with surprising ease
and quickness. Here’s a quick overview of how
it works:
HOW-TO DVD
s
Groove
Cutter
Flush Trim
Tongue
Cutter
Minimum Stock Thickness - 1/2” • Maximum Stock Thickness - 1-1/8”
s
Grooves are routed in the backs of all face
frame pieces before they are assembled.
Tongues are routed on the fronts of the side
panels, floors, and partitions.
Grooves are also cut in the backs and tops of
the side panels for placement of corner blocks,
and nail rails that have been previously cut with
tongues.
The Tongue & Groove joint is used in virtually
every step of Marc’s new cabinetmaking system,
which you can master yourself by viewing his
DVD Cabinetmaking Made Easy.
The big key to this whole system is that
both the Tongue & Groove bits are a perfectlymatched pair in height. This allows repeated
s
Description
Shank
Dia.
Bearing
Sale
02003
1/2” Shank Tongue & Groove Cutters
1/2”
HC318DZZ & 698ZZ
$109.90
01019
1/2” Shank Flush Trim Cutter
1/2”
R3ZZ
$16.90
03004
3-Pc Tongue & Groove Cabinetmaking Set
1/2”
-
$109.90
16
$126.80
$16.90
YOUR COST:
$109.90
Bit height set-up is a breeze
with our Easy Set Jig
SEE PAGE 53
s
ITEM
TOTAL VALUE: YOU SAVE: Order online: www.sommerfeldtools.com
For Wood
4-Pc Tongue & Groove
Cabinetmaking PRO Set
HALF-PRICE
Adds a special 4” tall Mitered Molding Bit to our Tongue & Groove Set
Molding bit produces decorative 3” wide stile & rail stock for mitered cabinet doors…
then switch to the tongue & groove bits to create spline-like corner reinforcements
HOW-TO DVD
T
A $9.90 VALUE
DVD: DVDS7
Box has flush-mounted
magnetic catch.
s
his new set combines our Tongue &
Groove Cabinetmaking set on the
previous page with our popular mitered
molding bit. The set includes the three
bits needed for all your tongue & groove
cabinetmaking needs, plus adds the mitered
molding bit which machines the surface
molding for your mitered raised panel doors.
The tongue & groove cutters are also used
to cut the tongues and grooves on the four
corners of your door.
The mitered molding bit machines the
profile on the top surface on 3” wide stiles and
rails. The bit measures (4“) in length.
s
s
s
The set comes with two different-sized
bearings. The large bearing cuts ¼” deep
tongue & grooves for cabinetmaking
construction. The smaller bearing cuts ½”
deep tongue & grooves for your mitered raised
panel door.
The flush trim bit trims off the end of the tongue so the tongue fits
into stopped groove cut. This gives a mortise and tenon look to the
outside edge of the mitered raised panel door.
All of our bit sets are packaged in a beautiful, custom-designed
hardwood case to keep your bits safe, clean and easy to find for many
years of service.
s
Machines materials from ¾” to 1-1/8” thick
s
The groove cutter cuts a l/2” deep groove
(when the small bearing is installed) in the
right side of all miters. Also, it cuts the groove
on all inside edges of rails and stiles for raised
panel insertion.
SEE PAGE 53
s
The tongue cutter cuts a ½” deep tongue
(when small bearing is installed) in the left side
of all miters.
Flush Trim
Making mitered raised
panels is a snap as seen in
Marc’s new DVD
Mitered Raised Panels
Made Easy
Item DVDS7
See Page 11
ITEM
Groove
Cutter
Description
$36.80
YOUR COST:
$179.90
Mitered
Molding Bit
Tongue
Cutter
Shank Dia.
Bearing
Sale
02003
1/2” Shank Tongue & Groove Cutters
1/2”
HC318DZZ & 698ZZ
$109.90
01019
1/2” Shank Flush Trim Cutter
1/2”
R3ZZ
$16.90
01010
1/2” Shank Mitered Molding Bit
1/2”
R3ZZ
$89.90
04001
3-Pc Tongue & Groove Cabinetmaking PRO Set
1/2”
-
$179.90
17
TM
For Wood
Order Line: 1-888-228-9268
TM
Special profile 4” Mitered Molding Bit
HALF-PRICE
Turn 3” wide stock into an attractive molding profile for framing
cabinet doors, furniture panels, picture frames and lots more
B
efore now you had to pay high, custom-tooling dollars to get this elegant
look on a mitered raised panel. After you’ve made your first set of doors
with your new mitered molding bit, your work will be the admiration of all
your woodworking friends.
HOW-TO DVD
s
We advise using Sommerfeld’s Tongue and Groove Cabinetmaking Set with
this bit to make your mitered doors. For those of you that don’t have our tongue
and groove set, we have the new pro set shown on page 15, which includes all 4
bits needed to create your mitered raised panel door.
s
The center-point turning of all our bits ensures that this extra long bit (4“) is
perfectly balanced with no run out to produce professional quality cuts.
s
We advise cutting 3” wide stiles and rails for building your mitered raised
panel doors.
A $9.90 VALUE
DVD: DVDS7
s
Detailed instructions for making mitered raised panel doors included in the
Cabinetmaking Made Easy DVD.
Mitered Molding Bit
ITEM
Description
Bearing
Sale
01010
1/2” Shank Mitered Molding Bit
R4ZZ
$89.90
18
Order online: www.sommerfeldtools.com
For Wood
6-Pc Jointmaking Set
The set to reach for when you need quick, super-strong specialpurpose joints for your important, strength-critical projects
Add our Easy Set Jig (see Page 53) for precise set-ups and
fast changeover times !
H
ere it is – the best collection of jointmaking bits we have. Some
woodworkers have shied away from using these difficult to set-up bits
because none of them have a bearing for a cutting reference, and all six
of them are difficult to set up to the correct height. Now these bits can be set
up with ease with the help of the new Easy Set (see page 53).
magnetic catch.
s
Drawer
The large lock miter bit produces perfectly-fitting miter joints that lock
Lock Bit
together in stock from 5/8” to 1 1/8”. (Note: Use Easy Set for trouble-free bit
set-up.)
Also included is the baby lock miter that allows you to cut the same joints in
Lock
stock from 3/8” to ¾”.
Miter Bit
22-½˚ joints are very popular for angled kitchen cabinets, angled corner
entertainment centers, kitchen islands, and corner hutches.
TOTAL VALUE: Our two 22-½˚-lock bits provide a fast, accurate, and strong
YOU SAVE: way to build those angled joints. The two cutters are a matched
pair in height for easy set-up.
YOUR COST:
Baby
Lock
Miter Bit
Reverse Glue
Joint Bit
s
22-1/2º
Lock
Female
22-1/2º
Lock Male
s
s
$292.50
$ 102.60
ITEM
Bit height set-up is
a breeze with our
Easy Set Jig
SEE PAGE 53
Description
$189.90
Shank Dia.
Bearing
Sale
01009
Drawer Lock Bit
1/2”
-
$47.90
01008
Reversible Glue Joint Bit
1/2”
-
$47.90
01007
Baby Lock Miter Bit
1/2”
R3ZZ
$49.90
01006
Lock Miter Bit Set
1/2”
R3ZZ
$66.90
02004
22-1/2˚ Lock Miter Set (2 Bits)
1/2”
R3ZZ
$79.90
06002
1/2” Shank Jointmaking Set
1/2”
-
$189.90
3-Pc Glue Joint Set
A value-priced starter set for creating glue joints, drawer
lock joints and 45˚ lock miters on stock up to 3/4” thick
Three of the most frequently used specialpurpose joints in a single set
Drawer
Lock Bit
Reverse Glue
Joint Bit
s
All of our bit sets are packaged in a beautiful,
custom-designed hardwood case to keep your bits safe,
clean and easy to find for many years of service.
Baby
Lock
Miter Bit
$ 25.80
YOUR COST:
$119.90
See Page
Shank Dia.
Bearing
Sale
01009
Drawer Lock Bit
55
1/2”
-
$47.90
01008
Reversible Glue Joint Bit
54
1/2”
-
$47.90
01007
Baby Lock Miter Bit
54
1/2”
R3ZZ
$49.90
03006
1/2” Shank Glue Joint Set
-
1/2”
-
$119.90
ITEM
Description
19
TM
For Wood
Order Line: 1-888-228-9268
TM
6-Pc Cabinetmaking Set
SEE PAGE 53
Build stronger, better-fitting cabinets with less work, using Marc
Sommerfeld’s fail-safe Cabinetmaking System and this bit set
Eight reasons why Sommerfeld’s
Cabinetmaking router bit set beats
the competition, hands down
A
rched Raised Panel doors are the
perfect way to make your work truly
unique and distinctive.
You don’t need big, expensive equipment to
make beautiful arched raised panel doors and
panels. – you need the NEW Sommerfeld’s
Cabinetmaking Set. This newly-designed set
includes 6 professional-quality router bits to
make your job of building raised panels the
easiest yet.
Box has flushmounted magnetic catch.
s
Marc has redesigned every bit in this
set with the following improvements and
upgrades.
s
The door edge bit was also made larger, plus shallower to allow
for ease of mounting 35mm European hinges.
s
s
The matching flush trim bit has a shear angle to produce
superior cuts.
The raised panel cutter is the largest diameter in the industry at
3 ½”. It includes a back cutter, which allows machining of the front
and back of the panel in the same pass, giving you exactly the
thickness you need for the panel to fit exactly in the stile and rails.
An additional 1 ¼” diameter bearing is included to allow you to
make two separate passes when doing arched raised panel work.
All 6 bits are perfectly matched in height.
s
s
The stile and rail cutters engagement of the
tongue and groove was made deeper to ½”.
A. Makes joints stronger and now it
matches the engagement of the
shaper cutters.
B. Makes figuring door part sizes easier.
(½” + ½” = 1”)
s
s
The drawer front bit is made much larger in
diameter for a deeper cut, plus we added the
roundover at the bottom to give it an ogee
look. Now your drawer front matches the door
front edge detail.
Machines materials from 3/4” to 7/8” thick
$43.60
YOUR COST:
$249.90
HALF-PRICE
Pattern
Cut
ITEM
01001
HOW-TO DVD
A $9.90 VALUE
DVD: DVDS1
20
Ogee
Drawer Front
Ogee
Door Edge
Ogee
Pattern
Description
1/2” Shank Panel Cutter
Ogee
Cope
Panel
Cutter with
Back-Cutter
Cutting Diam
Bearing
Sale
3-1/2”
688ZZ / HC318DZZ
$89.90
01002
1/2” Shank Flush Trim Bit
3/4”
R4AZZ
$27.90
01003
1/2” Shank Ogee Drawer Bit
2-7/8”
R3ZZ
$45.90
01004
1/2” Shank Ogee Door Bit
1-3/4”
R3ZZ
$39.90
02001
1/2” Shank Rail & Stile Pattern /Cope
1-3/4”
608ZZ / 698ZZ
$89.90
06001
6-Pc Cabinetmaking Set
-
-
$249.90
For Wood
3-Pc Raised Panel Set
HALF-PRICE
Craft beautiful, professional-looking, Ogee pattern raised
panel doors for cabinets or furniture with this bit set
Eliminate lengthy set-up times and improve
your results with this easy-to-use 3-Pc set
F
HOW-TO DVD
ine doors are the most important visual
elements of your cabinets and furniture.
A $9.90 VALUE
Making top-quality raised panel doors is
easier than ever with our NEW three-piece
raised panel set. Make your doors professionallooking doors.
DVD: DVDS1
s
All three bits in the set are perfectly matched
in height.
s
Micro-grain carbide from Ceremetal™
s
Dupont Teflon® coating
s
Center-point turned on CNC equipment
s
All bits have anti-kickback feature
s
The stile and rail cutters’ engagement of the
tongue and groove was made deeper to 1/2”.
All other bits are 3/8” or 7/16”. This makes joints
stronger and now it matches engagement of
shaper cutters. Also, it makes figuring door
part sizes easier (1/2” + 1/2” = 1”) to deduct
from total door width.
$179.80
$29.90
YOUR COST:
$149.90
s
The raised panel cutter is the largest
diameter in the industry at 3 ½”.
TOTAL VALUE: YOU SAVE: s
It includes a back cutter, which allows
machining of the front and back of the panel in
the same pass, giving you exactly the thickness
you need for the panel to fit exactly in the
stile and rails. An additional 16 mm
diameter bearing is included to allow
you to make two separate passes
when doing arched raised panel work.
s
Available in Cove or Ogee profile.
SEE PAGE 53
Ogee
Pattern
Ogee
Cope
Cove
Panel Cutter with
Back-Cutter
s
Machines materials
from 3/4” to 7/8” thick
Bearing
Sale
01001
1/2” Shank Cove Raised Panel Cutter w/Back Cutter
HC318DZZ / 688ZZ
$89.90
01015
1/2” Shank Ogee Raised Panel Cutter w/Back Cutter
HC318DZZ / 688ZZ
$89.90
02001
1/2” Shank Rail & Stile Bit
698ZZ / 608ZZ
$89.90
03001
3-Pc Raised Panel Set
-
$149.90
ITEM
Description
21
TM
For Wood
Order Line: 1-888-228-9268
TM
HALF-PRICE
3-Pc Glass Panel Door Set
Make any type glass panel door quickly and easily with this versatile
bit set and the instructions in Marc’s HOW-TO Glass Panel DVD
Straight glass panels, arched glass panels and divided light
doors with muttons & mullions are all a breeze with this bit set
HOW-TO DVD
A $9.90 VALUE
T
he unique glass panel set can make
any type of glass panel door you need:
regular glass panel, arched glass panel,
or divided light doors with muttons and
mullions.
DVD: DVDS2
s
The glass panel doors utilize a rubber panel
retainer that secures the glass in a 1/8” slot.
All of the possibilities are covered in depth in
Marc’s DVD, Glass Panel Doors Made Easy.
s
Rail & stile cutters leave you with a square
rabbet on the inside of your door frame for
installing the glass.
s
The pattern cutting bit has a unique
feature with its two bearings: the bearing in
the middle of the 2 cutters gives you a guide
while cutting with the grain. The bearing
at the top is for use with templates to make
arched glass panels.
Slot Cutter
This set is great for making divided
light doors such as the one above!
Ogee Pattern
Ogee Cope
s
The slot cutter cuts the slot for the glass
panel retainer.
s
All of our bit sets are packaged in a
beautiful, custom-designed hardwood case
to keep your bits safe, clean and easy to find
for many years of service.
s
Machines materials from 3/4” to 7/8” thick
SEE PAGE 53
Rubber
Glass Panel
Retainers
Our unique retainer strips fit perfectly in the 1/8”
slot created by the slot cutter bit, and hold your
glass securely in the frame. Sold in 25’ lengths.
ITEM # GLASS 25’ roll SALE: $14.90
22
$33.90
YOUR COST:
$129.90
Bearing
Sale
01017
Slot Cutter 1/2” Shank, 2-1/16” Cutting
Diameter, 1/8” Cutting Length
SRI1212ZZ
$39.90
02007
1/2” Shank Rail & Stile Bit, Cutting Diameter
1-7/8”, Cutting Length 7/8”
SRI1212ZZ
$123.90
03003
3-Pc Glass Panel Set
-
$129.90
ITEM
Description
Here’s how it works: Mill the cope and pattern cuts first, then use the
slot cutter to cut the groove for the rubber panel retainer. The edge of
the pattern cut will ride on the bearing of the slot cutter bit. When you
cut the slot in the rails, you can cut the slot the full length of the stock.
When you cut the slot in the stiles, you need to set up reference points
to stop and start the cuts so they are hidden from view on the top and
bottom of the doors.
Setup illustrations shown 1/2 actual size
Rubber panel
retainer
14
Glass
Panel
For Wood
HALF-PRICE
Junior Raised Panel Set
Create miniature frames and panels for small jewelry boxes, gift boxes
and similar projects with this scaled-down raised panel set
Machines materials from 7/16” – 11/16” thick
and as small as 2” square
HOW-TO DVD
O
A $9.90 VALUE
ur Junior Raised Panel Set is truly
unique. Imagine where you can
incorporate small raised panels:
jewelry boxes, humidors, dollhouses, desk
sets, doll cradles, mini grandfather clocks and
more.
Now you can make the ultimate miniature
frames and panels from material as thin as
7/16” to as thick as 11/16” to as small as 2”
square. The Junior Raised Panel Set relies on
the same principles as its parent set.
DVD: DVDS6
s
s
The raised panel cutter has a backcutter
that accurately machines the tongue to 5/32”
in one pass.
s
The panel cutter machines the front and
back at the same time, not only making it
quicker, but allowing for all five pieces of your
assembly to be flush on the front and back.
s
The matching pair of stile and rail cutters
produces tight-fitting joints made for
material from 7/16” to 11/16”.
SEE PAGE 53
s
All of our bit sets are packaged in a
beautiful, custom-designed hardwood case
to keep your bits safe, clean and easy to find
for many years of service.
s
Cove Raised Panel Bit with Backcutter has a
2-1/2” diameter.
$49.90
YOUR COST:
$109.90
Cove Panel Cutter
with Back-Cutter
Ogee Cope
Ogee Pattern
Bearing
Sale
01018
1/2” Shank Junior Raised Panel Cutter w/Back-Cutter
688ZZ
$79.90
02006
1/2” Shank Miniature Rail & Stile Pattern/Cope (2 bits)
688ZZ
$79.90
03002
1/2” Shank Junior Raised Panel Set
-
$109.90
ITEM
Description
23
TM
For Wood
Order Line: 1-888-228-9268
TM
Can
5-Pc Chamfer Bit Set
er
Point Cut Roundover
Cancave Groove 40xxxxD
Full Beading
Bead
unge cut
Full
Bead
16xxxxELetter Bit 16G Plunge cut Edge Beading
Letter Bit 16G
Edge
Beading
Edge
Bull
Nose
Bull
Nose
Plunge
cut
ogee
Plunge
cut
ogee
Plunge cut ogee ANGLE
40xxxxC
oundover
Roundover
40xxxxC
Plunge
cut
ogee
Plunge
cut
ogee
Plunge
60 cut ogee
ANGLE 60
40series
40series
40series
40B
16xxxxB
16xxxxB
16xxxxB
6xxxxF
16xxxxF
17xxxxB
17xxxxB
Create beautiful
chamfers
from 11.25˚ to17xxxxB
45˚ 40B
P a tt
ern
Face Frame V Groove
541601A Bevel trim
ANGLE15
$159.50
$29.60
YOUR COST:
$129.90
1/2
Chamfer Bit
11.25˚
7
15
45
ern
Chamfer
22
15˚
I
L
Cutting Overall
Length Length
1/2
Ogee
7/8”
7/8”
2-7/8”
1545
22.5
d
Shank
Bearing
BeadingPRICE
Classical
Ogee
Diam.
1/4
Classical
Roman
Ogee
1/2 Ogee
1/2”
R3ZZ*
$29.90
512542C
Chamfer Bit
15˚
1”
7/8”
2-7/8”
1/2”
R3ZZ*
$25.90
Chamfer Bit
22.5˚
1-1/4”
7/8”
2-7/8”
1/2”
R3ZZ*
$30.90
513812B
Chamfer Bit
30˚
1-1/2”
7/8”
2-7/8”
1/2”
R3ZZ*
$33.90
514452
Chamfer Bit
45˚
1-3/4”
29/32”
2-3/4”
1/2”
R3ZZ*
$38.90
22.5
45˚
22.5˚
513182B
I
Double RoundoveC
Wavy Ogee
Classical
Classical
Roman
Ogee
612861C
613181B
Ogee
5-Pc
Chamferdoor
Bit
Set
-Reversibel
- door -edge 1/2”
$129.90
Reversibel
edgeedge
Drawer
* See
page
72
for bearing specifications
Triple
Beadedge
Rab
Rabbeting
Table
edge-D
type
Table
Table
edge-DTable
type edge-C type
TableSet
edge-C type 852222A
Table edge-C type
Table edge-B
type
Table edge-B
type
Table edge-B type
1/2” Architectural Molding Set
Create your own custom moldings!
Don’t pay the high prices for precut moldings. Save time and money
135dg Ed
and create your own by selecting the profile that’s right for your job
and use the type of wood you want. This set can create base and
122901C
Cove with
Fillet window casings, chairCove
cabinet
moldings,
rails,with
doorFillet
casings,
panel
R1/8"
moldings, picture frames, and more.
Cove with Fillet
3/8"
/4" R1/8"
R5/16"
R3/16"
R1/4"
R1/8"
ITEM
Panel Raiser-cove
Panel Raiser-ogee
et
er
22.5
ANGLE15
D
Degree
Cutting
Beading
1/8
3/16
Classical
Ogee
Diam.
1/4
ITEM Beading
Description
1/8 1/4
512222B
P a tt
Chamfer
Bevel
trim
22
45
7
TOTAL VALUE: YOU SAVE: 3/16
5/16 1/4
ern
Face Frame V Groove
trim
541601ABevelChamfer
22
7
ge
edge
Slot cutter05001
B
P a tt
Our Chamfer Bits work great to make accurate bevels
and chamfers for edge work or for making multi-sided
boxes or decorative projects. Use this set to build
perfectly aligned multi-sided pieces.
These bits are in a handsome, lidded hardwood case.
Canca
Bull Nose
40B
* See page 72
for bearing
Panel Raiser-cove
Panel Raiser-ogee
specifications
with back
withcutter
back cutter
A
24
R3/16"
Description
PanelPanel
Raiser-chamfer
Raiser-cove
Panel
Raiser-ogee
862222B
Architectural
Molding
Bit
862222C
Architectural Molding Bit
862542D
862862E
$132.40
YOUR COST:
$189.90
D
I
L
d
Bearing
PRICE
Cutting Diam. Cutting Length Overall Length Shank Diam.
Panel Panel
Raiser-chamfer
Panel Raiser-chamfer
Raiser-cove
Pull Bit
Drawer Pull
Bit
7/8”
1-5/8”
3-9/16”
1/2”
R3ZZDrawer$40.90
7/8”
711901H
1”
1-1/8”
1-3/8”
1-5/8”
3-9/15”
713812J
3-3/8”
1-5/8”
3-17/32”
1/2” 713001M
R3ZZ
711901H
1/2”
R3ZZ
1/2”
R3ZZ
$41.90
713812J
$42.90
$43.90
862542K
1”
1-5/8”
3-9/16”
1/2”
R3ZZ
$46.90
863812I
1-1/2”
1-1/2”
3-29/64”
1/2”
R3ZZ
$57.90
864452H
Architectural
Molding Bit
PanelPanel
Raiser-chamfer
Raiser-cove
Panel Raiser-ogee
with back
cutter
with
back
cutter
with
backMolding
cutter Set
07001
7pc
Architectural
B
Vertical Panel raiser
1-3/4” Panel
1-1/8”
3-7/64”
Panel
Raiser-chamfer
Raiser-cove
with
withcutter
back -cutter
- back
-
1/2” Raiser-chamfer
R3ZZ
$47.90
Panel
with
1/2” back cutter
$189.90
Do
7
71508
For Wood
6-Pc Starter Set
A great all-around set for basic,
general woodworking
T
his rugged, 1/2” shank, Starter Set includes six of our
most popular bits in a protective hardwood case.
With this set, you’ll be able to • Cut rabbets up to 3/8” deep x
1/2” high • Ease or round-over the edges of project components •
Create coved (concave) workpiece edges • Form drop-leaf (rule) joints
for table edges • Produce a decorative Roman Ogee edge • Chamfer
workpiece edges to a 45˚ beveled angle • Cut round or flat-bottomed
grooves in workpiece surfaces.
Set Includes: 1-1/4” dia. Rabbeting Bit • 3/8” Roundover Bit • 1/2”
Cove Bit • 1/4” Roman Ogee Bit • 45˚ Chamfer Bit • 1/2” Roundnose Bit
ITEM
Description
071272
Round Nose Bit
Cutting
Radius / Angle
D
Cutting Diam.
1/4”
1/2”
Box has flushmounted
magnetic
catch.
$60.50
YOUR COST:
$99.90
I
L
Cutting Length Overall Length
1-1/4”
2-7/8”
d
Shank Diam.
Bearing
Sale
1/2”
R3ZZ*
$17.90
703182
Rabbeting Bit
3/8”
1-1/4”
1/2”
2-1/2”
1/2”
R3ZZ*
$21.90
623182
Roundover Bit
3/8”
1-1/4”
21/32”
2-11/16”
1/2”
R3ZZ*
$24.90
723812
Cove Bit
1/2”
1-1/2”
5/8”
2-11/16”
1/2”
R3ZZ*
$29.90
693812
Roman Ogee Bit
1/4”
1-1/2”
11/16”
2-3/4”
1/2”
R3ZZ*
$30.90
514452
Chamfer Bit
45˚
1-3/4”
29/32”
2-7/8”
1/2”
R3ZZ*
$34.90
06004
1/2” Shank Starter Set
-
-
-
-
1/2”
-
$99.90
* See page 72
for bearing
specifications
12-Pc Introductory Set
Adds dovetailing, V-grooving, flush
trimming and three sizes of straight bits
to our Starter Set above for loads of extra
work-saving convenience
Cutting
D
Radius / Angle Cutting Diam.
$86.90
YOUR COST:
$169.90
I
L
Cutting Length Overall Length
d
Shank Diam.
Bearing
Sale
ITEM
Description
000632B
Straight Bit
1/4”
3/4”
2-1/2”
1/2”
$11.90
001272C
Straight Bit
1/2”
1-1/4”
2-7/8”
1/2”
$17.90
001902C
Straight Bit
3/4”
1-1/4”
2-7/8”
1/2”
$23.90
051272
Dovetail Bit
14˚
1/2”
1/2”
2-1/8”
1/2”
$13.90
071272
Round Nose Bit
1/4”
1/2”
1-1/4”
2-7/8”
1/2”
$17.90
501272A
Flush Trim Bit
1/2”
1/2”
2-1/2”
1/2”
1/2”
081272
V-Groove Bit
90˚
1/2”
1/2”
2-1/8”
1/2”
623812
Roundover Bit
1/2”
1-1/2”
3/4”
2-13/16”
1/2”
R3ZZ
$28.90
723812
Cove Bit
1/2”
1-1/2”
5/8”
2-11/16”
1/2”
R3ZZ
$29.90
513812
Chamfer Bit
45˚
1-1/2”
23/32”
2-5/8”
1/2”
R3ZZ
$26.90
703812
Rabbeting Bit
693812
Roman Ogee Bit
12002
1/2” Shank Introductory Set
R3ZZ
$13.90
$12.90
1-1/2”
1/2”
2-1/2”
1/2”
R3ZZ
$27.90
1/4”
1-1/2”
11/16”
2-3/4”
1/2”
R3ZZ
$30.90
-
-
-
-
1/2”
-
$169.90
25
TM
Mortising
0
For Wood
Bull Nose
7
Order Line: 1-888-228-9268
TM
1/2” Shank Roundover Bit Set Flush trim
Top quality in one of today’s most frequently
Dish Cutter
used edging
bit profiles Point Cut Roundover
16xxxxD
Plunge cut
16xxxxE
e and Bead
Roundover
g
This four-piece Roundover Set is one of the most popular of
all the sets
16xxxxF
xC
rim
Letter Bit 16G
ANGLE 60
we offer…and it’s easy to see why. They’re so versatile that you’ll find
yourself reaching for them again and again whenever you need to ease
the edges of projects to create simple, smooth lines.
Or…use them in combination with our Cove Bit Set (see below) to help
create the tight-fitting rule joints used for drop leaf tabletops.
Order the complete set today and save $30.70 !
Set Includes: 1/8”, 1/4”, 3/8” and 1/2” radius bits with rugged 1/2”
diameter shanks, plus a handsome, lidded hardwood case. Face Frame V Groove
Plunge cut ogee
16xxxxB
P a tt
$90.60
$30.70
YOUR COST:
$59.90
ITEM
Order Both Sets
SAVE Another $20.00!
over
3/8
623812
1/4
Get 04002 & 04003 For Just
5/16
$99.90
Item #20023
* See page 72 for bearing specifications
ern
Roundover
1/2
3/8
5/16
Bevel trim
541601A
TOTAL VALUE: YOU SAVE: Plunge cut ogee
17xxxxB
ANGLE15
22
7
R
R
Cutting
Radius
Description
Roundover Bit 3/16
1/8 1/2”
D
Cutting
Diam.
I
Cutting
Length
1-1/2”
3/4”
L
Overall
Length
d
Shank
Diam.
Bearing
2-13/16” Beading
1/2”
R3ZZ*
1/4
PRICE
Slot
cutter
$28.90
623182
Roundover Bit
3/8”
1-1/4”
21/32”
2-11/16”
1/2”
1/2
R3ZZ*
$24.90
622542
Roundover Bit
1/4”
1”
17/32”
2-9/16”
1/2”
R3ZZ*
$20.90
621902
Roundover Bit
1/8”
3/4”
13/32”
2-1/2”
1/2”
R3ZZ*
$15.90
04002
1/2” Shank Roundover Bit Set
-
-
-
-
1/2”
-
$59.90
Slot cutter
1/2” Shank Cove Bit Set
Reversibel door edge
Drawer edge
Table edge-B type
Clas
Ta
Here are the mirror image match-ups for our
Roundover Bit Set above
Cove
The 4-piece Set is the perfect companion for our Roundover Set
R3/8"cabinet
above. You’ll use them to edgeR1/2"
all types of furniture projects,
doors, custom-designed picture frame moldings and lots more.
Match them up with the corresponding Roundover Bit (see above)
and they’re perfect for creating the tight-fitting rule joints used for
drop leaf tabletops.
Order the complete set today and save $33.70 !
Set Includes:
3/16”, 1/4”, 3/8”
and 1/2” radius bits with rugged 1/2”
R3/16"
R1/8"
diameter shanks, plus a handsome, lidded hardwood case.
Cove
R1/2"
R3/8"
R5/16"
R1/4"
R
ITEM
Description
723812
Cove Bit
723182Ogee
Cove
Bit fillet
with
$33.70
YOUR COST:
$59.90
R
D
I
L
d
Cutting Radius Cutting Diam. Cutting Length Overall Length Shank Diam.
Panel
Raiser-ogee
2-11/16”
1/2”
Bearing
Ogee
PRICE
1-1/2”
5/8”
3/8”
1-1/4”
9/16”
2-9/16”
1/2”
R3ZZ*
$24.90
722542
Cove Bit
1/4”
1”
1/2”
2-1/2”
1/2”
R3ZZ*
$19.90
722222
Cove Bit
3/16”
7/8”
1/2”
2-1/2”
1/2”
R3ZZ*
$18.90
04003
1/2” Shank Cove Bit Set
-
-
-
-
1/2”
-
$59.90
26
with fillet
Raiser-cove
R3ZZ*Panel $29.90
1/2”
Panel
* See page 72
for bearing
specifications
Panel Raiser-cove
Panel Raiser-ogee
C
Panel R
For Wood
TM
6-Pc Plygroove / Flush-Trim Set
AT LAST ! Straight dadoing/grooving router bits,
sized to work with today’s undersized plywoods
– PLUS – three sizes of flush-trim bits
There’s nothing worse than trying to connect one piece of
plywood to another with dadoes or grooves that are 1/32”
or more wider than the plywood that goes into them. This
bit set solves that problem. It starts with three special,
undersized Plygroove bits: 23/32” , 31/64” and 7/32” – for use
with 3/4”, 1/2” & 1/4” plywood -- then adds three different
sized flush-trim bits for working in tight spots as well as the
wide, open spaces.
Set Includes one each: 1/4”, 3/8” & 3/4” dia. bearing-piloted
Flush-Trim Bits • 23/32”, 31/64” & 7/32” dia. Plygroove Bits - (all
with 1/2” shanks)
3/4
YOUR COST:
$59.90
I
Cutting
Length
L
Overall
Length
d
Shank
Diam.
Plygroove Bit
7/32”
3/4”
2-1/2”
1/2”
$14.90
Plygroove Bit
31/64”
1”
2-1/2”
1/2”
$17.90
23/32”
1”
2-5/8”
1/2”
1/4”
1”
2-7/8”
1/2”
R144ZZ*
$14.90
Description
000562B
001232B
001832B
Plygroove Bit
500632C
Flush Trim Bit
3/8,3/4
1/8,1/4
3/8,1
1/2,1
PRICE
Bearing
500952B
Flush Trim Bit
3/8”
1”
3”
1/2”
R166ZZ*
$16.90
Flush Trim Bit
3/4”
1”
2-3/4”
1/2”
R4AZZ*
$22.90
06003
6-PC
Plygroove/Flush Trim Set
Dovetail bit
1/2”
-
$59.90
-
- Box bitCore
Straight bit
Veining
V Groove bit with top bearing
3/8
1/2
5/8
Pa tte
R=5/16
I=5/8
Letter Bit 16G
ANGLE 60
R1/8
I=1/4
Plunge cut ogee
16xxxxB
Face Frame V Groove
541601A
* See page 723/16
for bearing
specifications
ITEM
Description Bevel trim
ANGLE15
R1/2071272
071582
1/8
7
22
rn
a tt e
R
Cutting Radius
R1/8
I=1/4
4-PcStair
Roundnose
Set
thread bit
Ovolo bit
R3/4
R1/2
R3/8
R1/4
tt e
Edge Beading
40series
Cancave Groo
Full Bead
40xxxxC
Bull Nose
40B
$28.70
YOUR COST:
$59.90
DChamfer
I
L
d
Sale
15
22.5
Cutting45Diam. Cutting Length
Overall Length
Shank
Diam.
Plunge
Cut
Roundover
R1/81/2”
5/8”
1”
2-1/2”
1/2”
$19.90
071902B
Roundnose Bit
3/8”
3/4”
1”
2-5/8”
1/2”
$22.90
072542
Roundnose Bit
1”
1-1/4”
1/2”
$27.90
04004
1/2” Shank Roundnose Set1/2
Beading
1/2”
-
Classical Ogee
-
1-1/4”
10xxxxB1/2”
2-7/8”
R1/4 1/4”
5/16”
1/4
R1/
rn
Roundnose
Bit
R3/8
Roundnose Bit
Straight pattern
Radius 12xxxxB
R=5/16
R3/8*1-1/4
* See
page 72 for bearing
I=5/8 specifications
I=3/8
Plunge cut ogee
17xxxxB
P
R3/4
Round Nose bit
1/4*1/2
Pa
R3/8*1-1/4
Ovolo bit
5/8,3/4
This simple, 4-Pc set is a favorite of professional signmakers
Straight
pattern
andHarf
cabinetmakers
alike. Used by signmakers for
engraving
Radius 12xxxxB
15series
lettering, logos and designs
into
the
surfaces
of
wood
and
Ogee Bit
similar materials, while cabinetmakers use them for fluting and
making the stylish, custom decorative moldings and trim work
that’s common in today’s cabinetry.
Set Includes one each: 1/4”, 5/16” 3/8” and
1/2” radius.
R=3/8
R=1/4
Roundnose Bits - (all withI=1-1/4
1/2” shanks) .
und Nose bit
Plunge cut
Roundover
16xxxxF
Straight bit
V080631
An inexpensive,
must-have bit set for engraving workpiece surface
5/8,3/4
designs, signmaking or fluting furniture legs and moldings
rn
Bull Nose
Cut Roundover
E
Straight bit
$23.90
1/2,3/4
521902A
Straight bit
1/4
$111.40
$51.50
D
Cutting
Diam.
ITEM
5/16,1
TOTAL VALUE: YOU SAVE: Ogee
-
2-7/8”
Classical
-
$17.90
Roman Ogee
1/2”
bit
$59.90
27
Wav
613
Dish Cutter
16xxxxD
Groove and Bead
forming
16xxxxC
V Groove bit with
top bearing
Veining
VCore
Groove
GrooveVbitGroove
ANGLE 60 ANGLEANGLE
Radius 12xxxxB
bitHarf
60 V 60
V080631
Boxbitbit
DIA 1/2"
Dovetail DIA
bit 1/2" DIA 1/2"
rn
For Wood
3/8
1/2
Point Cut Roundover
16xxxxE
Plunge cut
Letter Bit 16G
Edge Beading
Plunge cut ogee
Roundover
Plunge cut ogee
ANGLE 60
40series
16xxxxB
16xxxxF
17xxxxB
Plunge Cut RoundoverVbit
V Groove
bittop
with
top bearing
GrooveVbit
with
top
bearing
Groove
bit
with
bearing
Groove
bit
Ovolo
bit
Round Ovolo
NoseVbit
Straight
pattern
Ovolo
bit
Ovolo bit
Veining
10xxxxB
Veining
R=3/8
V Groove bit Veining
ANGLE
R3/4
R1/2 60
R3/8
R1/4
R1/8V080631
e rn
15series
R3/4
R1/2I=1-1/4 R1/2 R1/2
R3/8
R3/4 R3/4
V080631
V080631
R=5/16
R1/8
R=1/4
P a tt
DIA 1/2"
Order Line: 1-888-228-9268
TM
Pa tte
3/4
5/8
3/4
3/4
5/8
1/2
5/8
1/2
1/4*1/2
1/23/8
3/8
Ogee Bit3/8
R3/8*1-1/4
Pa tte
I=5/8
rn
rn
Pa tte
it
Pa
12-Pc Mini Router Bit Set
1/4,3/4
5/16,3/4
5/16,1
3/8,3/4
1/8,1/4
3/8,1
Bull Nose
Mortising
Hinge Mortising
Hinge
Mortising
Top
quality
inHinge
one
of today’s most
Dovetail
bit profiles
frequently
used
edging
bit
Key Hole
bit
Stair thread bit
Straight
bit
3/8
1/2
aight bit
it 16G
60
Pa tte
0
rn
0
0
7
7
7
Pa tte
I=1/4
rn
I=3/8
5/8
Classical Plunge
Cut 1/2
16xxxxA
Straight
bit
3/8
5/16
Straight bit
3/4
Roundover
n
1/2
1/2,3/4
5/8,3/4
Edge Beading
Plunge cut ogee
Plunge cut ogee
40series
16xxxxB
17xxxxB
Conventional
router
bits produce profiles that can
1/4*1/2
22
Slot cutterR1/8
tt e rn
Chamfer S
Plunge Cut
Roundover
bitCut 1
45 Plunge
Classical
10xxxxB17xxxxA
Ogee Bit Ogee Ogee
Bit Bit
Canoe Bit 40xxxxE
Pa
tt e rn
Drawer edge
R=1/4
I=3/8
I=1/4
Straight pattern
Harf Radius 12xxxxB
Roundover
3/16
Stair thread
bit
Pa
Classical Plunge Cut
R1/8
16xxxxA
Bull Nose
R=5/16
I=5/8
R3/8*1-1/4
Full Bead
40xxxxC
Bull Nose
40B
1/4
Bevel
trim Harf12xxxxB
Harf Radius
12xxxxB
Harf Radius
Radius
12xxxxB
Round Nose bit
Core Box bit
3/8
17xxxxA
5/8,3/4
Face Frame V Groove Straight pattern
Harf Radius 12xxxxB
541601A
15series
Ovolo bit
7
ANGLE15
Veining
OgeeR1/2
Bit
Solid
R3/4
R3/8 carbide flush
R1/4trim
V080631
n
er
tt
Bull Nose
Hinge Mortising
Bull NoseBull Nose
Pa
7
0
Flush trim
V Groove bit with top bearing
Solid
carbide
flush trim
Solid carbide
trim
Solidflush
carbide
flush trim
5/8
1/2,1
r
tte
15series
Beading
Canoe BitClassical
40xxxxE Plunge Cu
1/4
1/8
3/16
overpower the delicate edges and
small gift or5/16
1/2 surfaces of3/8
Classical
Ogee
1/4
Classical 1/2
Plunge Cut
Ogee Bit
17xxxxA
t Roundover
Dish Cutter
Dish Cutter
Cancave
Groove
40xxxxD
Dish Cutter
Dish Cutter
PointRoundover
Cut Roundover
Point Cut Point
Roundover
Cut
Point Cut
Roundover
16xxxxA
Full
Bead
Plunge
cut
Bull Nose
jewelry
boxes
and
cabinets.
So,
Marc
developed
this
set
V16xxxxE
Groove
bit with
topof
bearing
Plunge
CutB
16xxxxD
Letter
Bitand
16GBead
Plunge
cut
16xxxxD
Full
Bead
Plunge
cut
16xxxxD
16xxxxD
16xxxxE
Plunge
cut
Plunge
cut
Edge
Beading
16xxxxE
16xxxxE
Letter
Bit
16G
Letter
Bit
16G
Ovolo
bit
Letter
Bit
16G
Letter
Bit
16GFull
Edge
Beading
Edge
Beading
Bull
Nose
Groove
Edge
Beading
Groove
and
Bead
Plunge
cut
ogee
Veining Groove and
Groove
and Bead
Beadcut
Bull Nose
40xxxxC
Roundover
Bull NoseBull Nose
Plunge cut ogee
cut ogee
Plunge
ogeePlunge
10xxxxB
V Groove
bit
Plunge
cut ogee
ANGLE
60
Roundover
40xxxxC
cut ogee
Roundover
Plunge
cut
ogeePlunge
40xx
Roundover
40series
Plunge
cut ogee
ANGLE
ANGLE40B
60
ANGLE
60 60
ANGLE
60
40series
R3/4
R1/2
R3/8 40series 40series
R1/4 Roundover
R1/8
forming
forming forming
16xxxxB
16xxxxF
40B
17xxxxBWe’ve
16xxxxB
40B 40B
twelve
miniature
bits
to overcome
that problem.
16xxxxF V080631 forming 16xxxxB 16xxxxB
17xxxxB
16xxxxF 16xxxxF
17xxxxB 17xxxxB
16xxxxF
16xxxxC
16xxxxC 16xxxxC
16xxxxC
3/8
1/2
R=3/8
R=5/16
received lots of comments about these littleI=1-1/4
jewels … most
I=5/8
Cove
stating that they’re ideal for adding fine, crisp details to box
R1/2"
R3/8"
R5/16"
R1/4"
lids and edges, small picture frames, miniature furniture and
Canoe Bit 40xxxxE
Slot cutter
Drawer edge
Chamfer
Bevel
trim
Straight
pattern
Table edge-C type
Table edge-B type
similar projects.
Harf Radius 12xxxxB
Cut Roundover
15series
Cancavecatch.
Groove
40xxxxD
15
22
45
magnetic
C
7 Plunge cut
22.5
NGLE15 Solid carbide
Full Bead
xE
Letter Bit 16G
Edge Beading
173492M
flush trim
Classical
Plunge Cut
Ogee Bit
Bull Nose
1
cut ogee
SetFace
Includes:
1/4”
Core60Box BitPlunge
•
35/64”
Cove
Bit
•
3/8”
40xxxxC
Roundover
Plunge
cut
ogee
Frame V Groove
ANGLE
Face Frame
V Groove
Face Frame40series
V
Groove
Frame
V Groove
Face
Frame
V Groove
16xxxxA
Plunge
Cut Roundover
40B
Chamfer
16xxxxB
Bevel
trim
16xxxxF
Chamfer
17xxxxBbit 541601A Face
ChamferChamfer
Flush trim
541601A
7 Flush Flush
Bevel trim
trim trimBull Nose
Flush trim
BevelBevel
trim trim
0
541601A
541601A
541601A
Straight
bit
10xxxxB
Roundover
Bit
Roundover
Bit • Classical
plunge15
22
45Straight bit
R1/2
R3/8
R1/4 • 13/16”
R1/8 ANGLE15
1
Stair
thread
bit
15
7
22.5
22
45
15
22
45
22
45
7
7ANGLE15 7
22.5
22.5 22.5 173492M
ANGLE15 ANGLE15
ANGLE15
1/8,1/4type Ogee
1/2,1Bit • Ogee
1/2,3/4
5/8,3/4
Panel Bit • Roman Ogee Bit • Ogee
TOTAL VALUE: $166.80
w/Fillet Bit • Classical Ogee Bit • 45˚ Chamfer Bit • Wavy Bit •
YOU SAVE: $66.90
Classical Bit (all with 1/4” shanks)
P
P a tt
e rn
Pa
Pa tte
5/8
3/4
R1/8
I=1/4
R=1/4
I=3/8
P a tt
tt e
rn
Pa
rn
e rn
P a tt
e rn
P a tt
e rn
P a tt
e rn
Pa
tt e
rn
P a tt
P a tt
e rn
e rn
P a tt
YOUR COST:
e rn
$99.90
Canoe B
Cove
Ogee with fillet
Point
Cut Roundover
Straight
pattern
Cove with Fillet
Full Bead
Plunge cut
16xxxxE
Face
Frame
V Groove
Letter Bit 16G
15series
Edge Beading
Beading
Bull Nose
Chamfer
Round Nose
bit trim
PlungeCut
cut ogee
Bevel
Classical Plunge
40xxxxC
Roundover
Plunge
cut ogee
541601A
ANGLE
60
R1/2"
R3/8"
R5/16"
R1/4"
R3/16"
R1/8" Double Roundover
40series
Wavy
R=3/8
Roundover
Roundover
Roundover
Roundover
40B Beading
Classical
Ogee
16xxxxB
Beading
Core Box1/4
bit
Classical
Plunge
Cut
Classical
17xxxxA
16xxxxF
17xxxxB
15
Beading
Beading
22
45
Roman
Ogee
1/8
R=5/16
R1/8
3/16
I=1-1/4
7
1/4 3/16
ANGLE15
1/8 R=1/4
1/4
1/2
Double
Roundover
1/8
1/4
1/4
3/16
1/8 22.5
1/8
612861C
Wavy
1/4*1/2
R3/8*1-1/4
3/16
3/16
613181B
Ogee
Classical
Ogee
173492M
n
I=1/4
I=3/8
16xxxxA
1/2
Classical
r
1/2
3/8 5/16 1/4
1/2
1/2
3/8
I=5/8
Classical
Ogee Classical
3/8
Ogee
5/16 5/16 1/2
5/16
Ogee Ogee
Classical
1/4
Classical Classical
1/4 3/8
tt e
1/4 Roman
Rom
612861C
613181BClassical
1/2
Ogee
Pa
1/2
1/2
Ogee
Ogee Ogee
Dish Cutter
16xxxxD
ee 1/4
Bit
Pa
Core
ove bit with top bearing
Bit
1/4
Drawer edge
rn
tteedge
Bead
el doorPaFull
Classical
Cove
Face
Frame
V Groove
Ovolo
bit Bit
Canoe
Bit 40xxxxE
Plunge
Ogee
Roundover
Veining
Bit
3/16
ITEM
Ogee
Panel trim
Bevel
12001
1/4
Description
Reversibel door3/16
edge
R1/4"
R1/2" R3/16" R1/2"
R1/8"
R1/2" R3/8"
R3/8"
R3/8" R5/16"
173492M
R5/16" R5/16"R1/4"
Sale
693ZZ
$99.90
Edge Beading
40series
Wavy
R3/16"
613181B
Panel Raiser-ogee
Bevel
trimPanel Raiser-cove
R3/8"
R5/16"
22
7
Full Bead
40xxxxC
Bull Nose
40B
R1/4"
R3/16"
Panel
Raiser-ogee
Panel
Raiser-ogee
with back cutter
B
A
Rabbeting Set
ITEM
Description
08001
Incra-Jointech Set
Beading
dge
R1/8"
R3/8"
R5/16"
711901H
Ogee with 713812J
fillet
713001M
Wavy
2-1/2”
613181B
Roman Ogee
3/4”
with back cutter
1”
7.5˚
1/4”
5/16”
9˚
5/16”
3/8”
612861C 1/2”
2-3/4”
1/2”
2-1/2”
1/2”
711901H
$12.90
$11.90
Dovetail Bit
051272
Dovetail Bit
14˚
1/2”
1/2”
2-1/8”
1/2”
$13.90
051582
Dovetail Bit
7˚
5/8”
7/8”
2-1/8”
1/2”
$16.90
Dovetail Bit
7˚
3/4”
7/8”
2-1/8”
1/2”
$18.90
713812J
28
Panel Raiser-ogee
B
Door Lip
713001M
715082K
Cove with Fillet
Panel Raiser-cove
with back cutter
3/8”
3/8”
1/2”
Drawer Pull Bit
$11.90
Bit
TableDovetail
edge-B type
edge-D type
9˚Table
Table edge-C typewith back
cutter
2-1/2”
$69.90
050792
901H
711901H
71
7˚ Dovetail Bit • 5/8” – 7˚ Dovetail Bit • 1/2” – 14˚ Dovetail
Lip
Bit • 3/8” – 9˚ Dovetail Bit • 5/16” – 9˚Door
Dovetail
Bit • 1/4” –
173492M
713001M7.5˚ Dovetail Bit (all with 1/2” shanks)
713812J
050952
051902
R3/16"
122901C
Double Roundover
Panel Raiser-cove
Dovetail Bit
A
R1/4"
Panel
Raiser-chamfer
713492L
Panel
Raiser-chamfer
e rn
715082K
Raiser-chamfer Door
a ttRaiser-cove
Panel
PanelPanel
Raiser-chamfer
Panel Raiser-cove
P
Drawer
Pull
Bit
Panel
Raiser-cove
LipRaiser-ogee
Raiser-ogee
PanelPanel
Raiser-ogee
Panel
with back cutterPanel Raiser-ogee
with cutter
back cutter
cutter
with cutter
back cutter with back with
back
cutter
back
with cutter
back cutter with back with
with back with
cutter
back
with back cutter
B BI
B
713001M
A D AB
A
Cutting A
L 711901H
d 713812J
713492L
Sale
715082K
Radius / Angle
Cutting
Diam.
Cutting Length Overall Length Shank Diam.
Vertical
Vertical Panel
raiser
Vertical
PanelPanel
raiser raiser
050632
Drawer Pull Bit
R1/8"
R1/8"
Cove with Fillet
15
000952B
R1/8"
R3/16" R3/16"
R1/2"
Drawer Pull Bit
R1/8"
Triple Bead 22.5
Triple Flute
852222A
852222B
Panel
Raiser-cove
Panel
Raiser-cove
with back cutter
Panel
Raiser-ogee
Raiser-chamfer
Classical Ogee Panel
135dg
Edge Molding
Classical
1/4”
Ogeecutter
with back
122901D
Panel Raiser-ogee 122901C Panel Raiser-cove
with
back
cutter
Straight
Bit
3/8”
with back cutter
B
Classical
711901H 711901H
715082K
Set Includes: 3/8” Straight Bit • 1/4” Straight
Bit • 3/4”713492L
–135dg Edge M
Panel
Raiser-cove
1/4
ogee
1/2 Straight Bit
000632B
with back
cutter
erOgee with fillet
A
Cove
®
Drawer P
$69.90
R3/16"
B
711901H
45
17xxxxA
DoubleTriple
Roundover
Wavy
Triple
BeadEdge Molding
Flute
135dg
Rabbeting
SetOgee
Roman
612861C
613181B Panel
Ogee
Raiser-chamfer
852222B
Panel Raiser-cove 852222A
Panel Raiser-ogee
with back
cutter
with back cutter
with back cutterPattern
122901D
122901C
with
Fillet
Cove with
FilletCove
Cove
with
Fillet
135dg
Edge
Molding
Classical
Ogee type
16xxxxA
Table
edge-D
Here’s a full set of bits, designed122901C
specifically for use
122901D
with Incra and Jointech products and accessories…all
manufactured
toPanel
ourRaiser-chamfer
highestDoor
standards.
Panel
Panel
Raiser-chamfer
Panel Raiser-cove
Panel
Raiser-cove
Drawer
Pull Raiser-cove
Bit
Raiser-ogee
Panel Raiser-ogee
Lip Raiser-ogee
PanelPanel
Raiser-ogee
Panel
Panel Raiser-cove
R1/4"
P at
Cove with Fillet
612861C
Chamfer
YOUR COST:
852222B
Double
R1/8"Roundover
Roman Ogee Pattern
A
with fillet
Ogee with
fillet Ogee
Ogee
with fillet
TOTAL VALUE:
$111.20
YOU SAVE: $41.30
-ogee
P
w
B
Classical
Bit
Sommerfeld’s set of straight 122901C
and dovetail router
bits
122901D
for use with the positioning
systems manufactured by
Canoe Bit 40xxxxE
Triple Bead
Rabbetingcompanies
Set
Table edge-D
type two recognized
Table
edge-C type
Table edge-B
type Groove
these
Cancave
40xxxxD
852222A
135dg Edge Molding
R1/4"
e rn
Drawer edge
Plunge cut ogee
17xxxxB
R1/4"
ClassicalA
Ogee Bit
e rn
8-Pc Incra / Jointech® Set
Cove with Fillet
R1/8"
Slot cutter
ssical
Wavy
Bit
852222A
Bearing
Beading
Ogee Bit
rn
1/4
Table1/2
edge-C
type
tt e
Table edge-B type
Pa
1/8
P a tt
5/16"
Roman
Ogee w/
Roundover
Plunge Cut Roundover bit
Bit ChamferOgee Bit10xxxxB Fillet Bit
Straight pattern
15series
Cove with Fillet
Plunge cut ogee
16xxxxB
13/16”
Chamfer
Bit
Ogee with fillet
Cove Cove
Cove
15
45˚
1/4” Shank Mini Router Bit Set
Drawer
5/16edge
6"
P a tt
Table edge-C type
Harf Radius 12xxxxB
3/8
e rn
541601A
R3/4
R1/2
R3/8
R1/4
R1/8
Vertical
Panel raiser
Beading
V080631
Reversibel
door edge
Triple
Bead
1/8
Triple Flute
door edge 22.5
22 edgeReversibel
Cancave
Groove 40xxxxD
45doortype
doorReversibel
edge
Slot ANGLE15
cutter
Drawer
Reversibel
edge
Reversibel
door edge
Slot cutterSlot cutter
Drawer
Roundover
Set
Drawer
edge
Slot cutter 15 RabbetingWavy
DrawerDouble
edge Table
7 typeedge
Table
edge-D
Table
edge-C
type
Classical
Ogee
Table edge-B
Table
edge-D
edge-D
type
Classical
Table
edge-D
type type
1/4
Table
edge-C
Panel
Raiser-chamfer
Table
edge-C
type
Table
edge-B
type
Table
edge-B
type
Roman
Ogee
Table
edge-C
type type
852222A
Panel
Raiser-cove
Table
edge-B
type
Triple
Bead
852222B
Triple
Flute
1/2
Panel
Raiser-ogee
612861C
613181B
Ogee
Rabbeting
Set
Table edge-D type
Table edge-B type
40xxxxC
P a tt
tt e rn
35/64”
3/8”
1/4”
type
tt e rn
with Set
back
cutter
Rabbeting
2-1/8”
Triple Bead
1/2”
852222A
$11.90
Triple
Flute
$12.90
852222B
713812J
“I want to
th
most imp ank you for the
ressive d
emonstra
I’ve ev713001M
er seen.
tion
I learned
much an
so
d bough
t your Sh
set. It’s th
aker
e best!”
J.S. Tole
do, OH
713492L
135dg Edge Molding
122901C
122901D
Door Li
715082K
For Wood
Fine-Tuning Your Rail & Stile Bits and Techniques for Perfect Joints
Sommerfeld’s matched Rail & Stile Sets are designed to deliver perfect joints,
right out of the box. There are many factors that affect the fit of these joints,
however. These include the condition of your router, the species of wood
you choose, your routing technique, and more. Of course, resharpening the
bit can also affect the final fit. In order to allow you to compensate for these
Problem #1:
The joint doesn’t close
Profiles seem to match, but there is a
consistant gap the full height of the joint.
Problem #2:
The stock does not lay flat
when the joint closes
The profiles match, but the faces of the
stiles and rails are not flat.
variables, Sommerfeld’s makes both bits out of two separate sections, which
can be shimmed to adjust the fit. Please note that only shimmed cutters can be
corrected in this fashion. There are six common problems that can occur when
using your Rail & Stile Sets. Here are the solutions that we have developed through
years of experience:
Solution:
The stock probably is not coming in contact with the
bearing as you make the cut. Be sure you are cutting
the full profile.
Solution:
The edge of your stock is not cut or planed square
to the face.
Solution:
Problem #3:
Joint is too loose or too tight
in the Mortise & Tenon.
The pattern portion of the joint matches,
but the tenon is too thick or too thin.
Add or subtract shims
in this portion of the
cope cutting bit, either
above or below the
bearing. Adding shims
will make the tenon
tighter. Subtracting
shims will loosen the
joint.
Solution:
Problem #4:
Joint is too loose or too tight
in the pattern area.
The mortise and tenon fits well, but the pattern
is too tight or too loose.
Problem #5:
Joint is misaligned.
The profiles match, but the faces and backs of the
rail and stile are offset.
Problem #6:
Surfaces are not flat.
One surface is flush (either the face or the back),
but the other surface is offset.
First, be sure the tenon
is fitting correctly. Now
add or subtract shims
in this area of the
pattern cutting bit. If
there is a gap between
the pattern cuts, add
shims. If the profiles
are too tight, remove
shims.
Solution:
This joint usually results from the cutters being
misaligned. Raise or lower the pattern cutting bit to
adjust the joint.
Solution:
This problem is caused by two pieces of stock of
different thicknesses. Be sure that all stock used
for rails and stiles is of the identical thickness, and
always rout with the “good” or “face” side down. We
recommend 13/16” stock.
29
TM
For Wood
Order Line: 1-888-228-9268
TM
STEP 1. MAKING A SAMPLE DOOR
STEP 3. CUTTING THE COPE CUTS ON EACH
END OF THE 2 RAILS
A) This sample door size is 12” wide by 20” long.
B) The door thickness should be 3/4” - 7/8”
STEP 2. DETERMINING THE SIZES OF EACH PART
OF THE DOOR
A) Always use a 1/2” overlay on all sides of the door.
B) If the door opening is 11” wide by 19” high then the door size
is 12” x 20”.
IMPORTANT: Use 2-1/2” wide stiles so the templates will
work properly.
3
1
5
4
1-2.
3.
2
1.
LEFT STILE
3/4” x 2-1/2” x 20”
2.
RIGHT STILE
3/4” x 2-1/2” x 20”
3.
TOP ARCHED RAIL
3/4” x 4-1/4” x 8”
4.
BOTTOM RAIL
3/4” x 2-1/2” x 8”
5.
RAISED PANEL
3/4” x 7-3/4” x 15-3/4”
LEFT AND RIGHT STILES
a) Always cut stiles 2-1/2” wide.
b) Length of stiles is same as door length.
TOP ARCHED RAIL
a) Cut 4-1/4” wide. Templates are 4” wide (cut 5-1/4” wide for
French Provincial doors).
b) Length of rail is found by subtracting 4” from the total
door width. (Overall door width is 12” minus 4”= 8” length of
rail) NOTE: This following procedure can only be used when
using 2-1/2” wide stiles. Subtract 4” from the total door width
instead of 5” since 1/2” in each stile will be taken up in the
pattern cut.
4. BOTTOM RAIL
a) Always cut 2-1/2” wide.
b) Length of rail is again found by subtracting 4” from the
total door width. (Overall door width is 12” minus 4” = 8” for
bottom rail lengths)
5. RAISED PANEL
a) Width is always 1/4” less than rail length. (1/8” space should
be left on each side for expansion of panel)
b) Rail length is 8” minus 1/4” = 7-3/4” width of raised panel.
c) Length of raised panel is found by taking the overall door
length and again subtracting 4”. (Overall door length is 20”
minus 4” = 16”, or 15-3/4” with panalign strips)
A) Cope cutter is the cutter with the bearing in the middle
B) Set the cope cutter to the correct height in the router.
1) The correct height is when, after the cut is made, the reveal
on the front side should be 1/8” minimum (Illustration 1)
2) Spaces A and B shown should be equal. If one is to be
bigger, make B thicker for strength of panel.
C) Set fence even with bearing.
D) Use wooden pushA
block to prevent tearout
at end of cope cut.
1/8"
E) Run stock through
with good side down at
B
14,000-16,000 RPMs.
1/8" - 3/16"
STEP 4. USING RAIL TEMPLATE TO FLUSH TRIM TOP RAIL
TO CORRECT SHAPE
A) Locate center of top rail with pencil on the back side.
B) Pick out the correct template.
NOTE: THE SIZE ON THE TEMPLATE IS FOR THE OVERALL DOOR
WIDTH. FOR THE TEMPLATES TO WORK PROPERLY STILES MUST
BE MADE 2-1/2” WIDE. IF STILES ARE MADE IN DIFFERENT WIDTHS, ADJUSTMENTS IN PICKING OUT TEMPLATES MUST BE MADE.
C) Line up template on back side of rail centering the notch of
template with center line of rail. Now nail through the template
into the 2 copes that were just cut (Illustration 2).
Illustration 2
D) Rough cut
with jig or band saw
within 1/8” or1/4” of template
(Illustration 3).
Illustration 3
E) Put flush
trimming bit into
router and set so bearing is
flush with template (Illustration 4).
F) Run
router at
20,000 22,000 RPMs and flush trim
top crown rail with good side down.
Illustration 4
8"
At this time all 5 pieces of the door should be cut to the correct size. 30
Illustration 1
NOTE: WHEN STARTING CUT,
ALWAYS REMEMBER TO MAKE
CONTACT WITH BEARING TO A
PLACE ON THE TEMPLATE
WHERE THERE IS NO WOOD
TO PREVENT KICKBACK.
2-7/16"
1-9/16"
1-9/16"
G) Slow down at end of cut
to prevent tearout. Leave
template attached to rail
for now
7-3/4"
For Wood
STEP 5. USING PANEL TEMPLATE TO FLUSH TRIM THE
RAISED PANEL TO SHAPE
A) Locate center of raised panel on front side.
B) Pick out correct template (same size as rail template).
C) Line up center notch of template with center line of panel and
make sure it is also square (Illustration 5).
D) Nail template to panel about 1/2” in from each side
(Illustration 5).
STEP 8. MAKING RAISED PANEL CUT
A) Insert panel cutter to correct height.
NOTE: IT MAY TAKE A COUPLE OF PRACTICE CUTS IN SCRAP
WOOD BEFORE GETTING THE PANEL FLUSH WITH PATTERN
CUT.
B) Set fence so it is even with bearing on panel cutter.
C) Run router slow 10,000 RPMs. ALWAYS USE PUSH BLOCKS
FOR SAFETY.
D) Make first cut across the grain with good side face down.
E) Cut with the grain on left side.
F) Remove fence and use a half-fence. (Illustration 7)
G) Start by re-doing left side and come around and cut the
curved top of the panel freehand.
H) Install full fence and complete right side.
Illustration 5
NOTE: DRIVE NAILS IN ABOUT 1/4”-3/8”. THE NAIL HOLES WILL BE
MACHINED OUT WHEN RAISED PANEL CUT IS MADE.
E) Rough cut stock to within 1/8” - 1/4” of template.
F) Flush trim raised panel in the same manner as you did the top
rail with the template on top (Back to illustration 4).
NOTE: AGAIN MAKE SURE BEARING COMES IN CONTACT WITH
TEMPLATE FIRST AND THEN GUIDE INTO THE WOOD.
G) Pull nails out after flush trimmed.
STEP 6. CUTTING FREEHAND PATTERN CUT ON TOP
ARCHED RAIL
A) Pattern cutter is the cutter with the bearing on top.
B) Insert pattern cutting bit to correct height to match cope
cut. This can be done by making a few practice cuts in scrap
wood.
C) Run router at 14,000-16,000 RPMs.
D) Start cut with bearing making contact with template only
and ease into cut. No fence is used. (Illustration 6).
E) Slow down at end of cut to prevent any chipout.
F) Remove template from top arched rail.
REMOVE FENCE TO ALLOW
FOR FREEHAND CUT
Illustration 7
STEP 9. FINISHING
A) Sand all pieces where needed, insert Panalign Strips (see
catalog page 29), and glue up. Do not glue raised panel
itself, only cope cuts and where they meet the pattern cuts.
B) After the door is sanded, use the door edger bit for a
professional-looking edge treatment. (Illustration 8)
C) For a mini-raised panel cut on the drawers, use the drawer
front bit. (Illustration 9)
Fence
Router Table
STEP 7. CUTTING THE STRAIGHT BOTTOM RAIL
AND 2 STILES
HALF FENCE
A) Insert fence and line up fence with bearing on the same
pattern cutter.
B) Run router 14,000-16,000 RPMs
C) Use push block and push bottom rail through with good
side down.
Illustration 6
Illustration 8
Fence
Router Table
Illustration 9
For more help order our video “Arched
Raised Panels Made Easy,” showing everything here in much greater detail.
Buy this DVD with the Sommerfeld
Cabinetmaking Set (page 20) or Raised
Panel Set (page 23) and Save $5.00!
DVD: DVDS1
SALE: $4.90
31
TM
For Wood
Order Line: 1-888-228-9268
TM
Mini Panel & Rail Templates
Rugged Doormaking Templates
Perfect for the Sommerfeld Junior Set
Junior
Templates
French Provincial
Classic Country
Clock Templates
Cradle Templates
* See page
75 for
cradle plans
Cathedral
These sets of durable plastic templates are Designed to work
perfectly with the Junior Set. The Junior template set includes
instructions on how to make a safety push block. Junior templates
sizes 4-7/8 – 8-3/8 . See page 75 for plans for desk accessories.
ITEM# TMPJR
Junior Arched Templates
SALE: $19.90
Roman
SALE: $19.90
SALE: $29.90
ITEM# TMPCR Cradle Templates
ITEM# CLTMP Clock Templates
Our Unique Panalign Strips
Sommerset
Panalign Strips inserted
in stiles and rails allow
for expansion while your
panels stay centered!
Panalign strip size: 1” x
1/4” x 1/4” in box.
Rail
Panalign Strip
Panel
Beautiful panel doors can be ruined by a poorly-aligned panel. On
your next door project, slip Panalign Strips into the stiles and rails to
keep panels perfectly centered, while allowing for expansion. Unlike
carpet foam, which eventually loses elasticity and ceases to work,
the rubber in Panalign Strips is specially designed to spring back
indefinitely. They are also the solution for a panel that has been
sanded so much that it is loose and rattles: inserting the strips keeps
the panel snug but not fixed. The rectangular shape makes the
strips easy to handle. Typical doors require 4 to 8 strips each.
Description
Quantity
Order No.
Panalign Strips
200
PNL1
$5.50
Panalign Strips
500
PNL2
$12.50
Panalign Strips
1000
PNL3
$22.50
32
Price
•
•
•
•
Buy two sets and Save $20.00
Buy three sets and Save $30.00
Buy four sets and Save $40.00
Buy five sets and Save $50.00
Some woodworkers have avoided making arched raised panel doors
for two reasons: the difficulty of making arched cuts and the expense of
hold-down jigs. This system solves both problems by eliminating the need
for high-cost hold-down jigs. (See catalog pages 28-29 showing step-bystep instructions for template use) Each of our five twenty-piece template
packages includes ten sizes for the panels and the ten corresponding
templates for the matching arched rails. Each template is individually
stamped with its size which indicates overall door width; any door
between 9-1/2” and 22” can be made. All templates are made of rugged
HDPE plastic for years of use.
Description
French Provincial Template Set
Classic Country Template Set
Cathedral Template Set
Roman Template Set
Sommerset Template Set
Order No.
SALE
TMP1
TMP2
TMP3
TMP4
TMP5
$69.90
$69.90
$69.90
$69.90
$69.90

3-Pc Shaker Set - Digital Marketing Services

Transcription

Similar documents

Building Code Training – August 30th at Burgundy Basin Inn

Hertco Express 20-DoorStyles_062013-A.indd

SoQi Bed Infrared Sauna Bed

Christmas Card order form15.pub - Little Sisters of the Poor Pittsburgh

GlASS FibER REiNFORcEd CONcREtE

European Network for Conflict Research (ENCoRe)

MA6900

Hovrn onconarons - Home Decorators Collection

INDUSTRY EXPERTISE + ELITE CONSUMER PANEL

StarMark - Star Building Systems