Hydraulic Squeeze Chute - Hi-Hog

Hydraulic Squeeze Chute
Options
Sternum Bar, Item 1554
An optional Sternum Bar or Brisket Bar, will inhibit livestock from
dropping down in the cattle squeeze chute.
The sternum bar pins into two bolt on floor brackets. This makes it
quick and easy to remove if required. To reduce leg traps Hi-Hog’s
sternum bar does not project through the headgate. All bends are
rounded to reduce bruising.
The sternum bar will mount in both the hydraulic squeeze chute as
well as the manual parallel axis squeeze chute.
Squeeze Trailer, Item 140
Transport and share your cattle squeeze chute
Hi-Hog’s squeeze trailer makes it easy to make your Hi-Hog squeeze
chute portable. The transport frame attaches quickly and securely to
your manual or hydraulic Hi-Hog squeeze chute.
Please note: you will need to weld several mounting brackets onto
your chute to accommodate the trailer. This trailer is designed for HiHog chutes only.
Gas Powered Hydraulic Pump
The gas powered hydraulic pump features the Honda GC 160 engine.
The GC 160 is a 4.6 net horsepower output
•
•
•
•
•
•
Compact combustion chamber, overhead cam design, and uniblock construction
reduce fuel consumption
Powerful torque across a wide RPM range helps reduce engine speed drop from
sudden load increases
Internal timing belt provides quiet operation
Valvetrain and gear noise is minimized
Precision engineered and machined components result in lower vibration
The motor is mounted in a wheeled frame for easy movement
Electric Hydraulic Pump
A two horsepower electric motor. The motor runs on single phase
either 110 or 220 Power. It provides 3,450 rpm and has a 5 gallon
tank.
• 115 volts (110) require 20 amps at the pump
• 230 volts (220) require 10 amps at the pump
Toll Free 1-800-661-7002
March 2013
|
Direct 1-403-280-8300
|
salesinfo@hi-hog.com
|
www.hi-hog.com