necklace - Create Your Style

DESIGN PROJECT
NECKLACE
“PASTEL”
DESIGN PROJECT
NECKLACE “PASTEL”
Swarovski crystals
Article
Supplies & Tools
Product Group
Article No.
Amount
Size
Color
Color Code
Fancy Stones
4127
2 pcs.
30x22 mm
Crystal Powder Blue
001 L104
Fancy Stones
4127
1 pc.
30x22 mm
Crystal Powder Green
001 L102
Fancy Stones
4127
2 pcs.
30x22 mm
Crystal Powder Rose
001 L103
Settings
4127/S
3 pcs.
30x22 mm
Brass
086
Pearls
5810
4 pcs.
3 mm
Crystal Powder Rose
001 944
Pearls
5810
10 pcs.
6 mm
Crystal Powder Green
001 967
Tools
Pearls
5810
23 pcs.
8 mm
Crystal Powder Green
001 967
Pearls
5810
26 pcs.
10 mm
Crystal Powder Rose
001 944
Crimping pliers
Flat nose pliers
Glue
Supplies
2x Cord endings, silver
8x Crimping beads, silver, 2 mm
4x Crimping beads, silver, 2.5 mm
Extension chain, 12 cm
1x Head pin, silver
1x Lobster clasp, silver, 12 mm
Plastic Tubing, violet, 3 mm, 70 cm
1x Split ring, silver, 5 mm
Spray paint, white
Tiger tail, grey, 0.46 mm, 150 cm
Tools
Crimping pliers
Flat nose pliers
Glue
Round nose pliers
Side cutter
Tweezers
Round nose pliers
Level of design: INTERMEDIATE Side cutter
Also have a look at the text instructions
on the last page!
Tweezers
Step 1
STEP 1
Paint
2 hrs
Repeat x3
STEP
Step 22
3 mm
1
2
8
9
cm
cm
cm
cm
CREATE-YOUR-STYLE.COM
x2
x2
x2
x2
0.46 mm
38 cm x2
2/6
STEP 3
Step 3
3
1/2
3
3
1/2
1/2
3
1/2
STEP
Step 4
1
Gl
ue
1
1
2
2
2
2
CREATE-YOUR-STYLE.COM
3/6
STEP
Step
5 5
1/2
3
3
20 cm x4
3
3
1/2
1/2
2
1
3
CREATE-YOUR-STYLE.COM
4/6
STEP
Step 66
Repeat step 5:
CREATE-YOUR-STYLE.COM
5/6
DESIGN PROJECT
NECKLACE “PASTEL”
STEP 1:
Spray all three Swarovski Settings art. 4127/S 30x22 mm with the white spray paint and let dry for 2 hours.
STEP 2:
Cut two pieces each of 1,2,8 and 9 cm violet plastic tubing. Cut two 38 cm pieces of tiger tail.
STEP 3:
String one piece of tiger tail through the 9 cm tube, the bottom holes in one of the painted settings, the 2 cm tube, the bottom
holes in another painted setting, another 2 cm tube and one more setting and then through the other 9 cm tube. Repeat this step
with the 8 cm tubes and 1cm tubes, stringing through the top holes in the settings. The 8 cm tube will lay inside the 9 cm tube.
See illustrations for details. Insert Swarovski Pearl art. 5810 3 mm Crystal Powder Rose Pearl and a crimp bead on one side of
the tiger tail ends. Crimp the crimp bead and cut off the tiger tail. Repeat on remaining three ends of tiger tail.
STEP 4:
Glue the Cord endings onto all the cord ends as shown. Insert Swarovski Fancy Stone art. 4127 into the Swarovski Settings and
close the prongs using tweezers to secure the Swarovski Fancy Stones.
STEP 5:
Cut four 20 cm long pieces of tiger tail. Insert 13 Swarovski Pearl art. 5810 10 mm Crystal Powder Rose Pearl onto one of the
pieces of tiger tail. Slip a crimp bead on one of the ends and then attach to one of the outer cord endings. String the tiger tail
back through the crimp bead and three of Swarovski Pearls. Crimp the bead. Repeat the same process at the other end of this
strand, but go through the extension chain instead of a cord ending. Repeat the step at the other side but attach the tiger tail
end to a 5 mm split ring. Attach the split ring to a lobster clasp.
STEP 6:
Repeat step 5 to create the inner strand using eleven 8 mm and five 6mm Swarovski Pearl art. 5810 Crystal Powder Green.
Attach the end of the strand with the 8 mm pearls to the cord ending and the end with the 6mm pearls to the chain and split ring
as shown in the illustration. String one Swarovski Pearl art. 5810 6 mm Crystal Powder Green onto a head pin and turn a loop
at the end. Cut off excess wire and attach it to the extension chain as shown in the illustrations.
CREATE-YOUR-STYLE.COM
6/6