Colour has never been so hot.

Colour has
never been
so hot.
More than 30 years as the
cleanest, most efficient
wood fire in New Zealand.
www.pyroclassic.co.nz
What makes a
Pyroclassic Fire
so unique?
More than 30 years as the cleanest, most
efficient wood fire in New Zealand.
Opt for our 3.7kW high output wetback
for all your domestic hot water needs.
The only clean air approved wood fire to
provide a genuine 12hr+ overnight burn,
even with a wetback*.
The 10mm steel top plate is perfect for
cooking.
Forget fire bricks, the unique cylindrical
ceramic fire chamber of the Pyroclassic IV
retains heat like a kiln.
Radiant and convection heating.
All Pyroclassic Fires carry our 15 year
ceramic firebox warranty.
Suitable for homes 100 - 200+m²
depending on house type.
HOW A PYROCLASSIC IV WORKS
Hot flue gases: mainly carbon dioxide,
water vapour and nitrogen
High velocity heated
room air
Cooking surface
3.7kW
optional
wetback
Secondary
combustion
Primary air
inlets
Secondary air
preheat to
over 600ºC
Secondary
air inlets
and load limiter
Gas and tar droplets
Mixed hot air and gases
Firewood
Turboslide
start-up
air supply
Ash
Ceramic lining
to maintain high
combustion
temperatures
and heat storage
Cool room air
drawn in
Min. cylinder wall
temperature 600ºc required
*Please note: 12hr+ overnight burn claims are based on the Pyroclassic IV installed with our Eco Flue Kit with sufficient flue draw and fuelled with dry, hardwood logs.
PYROCLASSIC IV ACCESSORIES
To get the best performance from your Pyroclassic IV, we
recommend that a tested and approved 100mm Eco Flue Kit
with full flow vertical discharge cowl is used.
Painted outlet cone with
painted flue lengths
Full Stainless Steel
(standard)
Painted outlet cone with
stainless steel flue
RECOMMENDED FLUE SYSTEMS
WOODBINS
Lift your Pyroclassic IV to the perfect height for loading wood
with one of our woodbins. Both options are reversible, one
side for stacking wood and one as a storage draw for your
tools and kindling, giving you ultimate flexibility. These are
finished in a durable ripple black powder coat.
Large Raised Hearth & Reversible Woodbin:
A direct replacement for a traditional insulated tiled hearth,
this woodbin meets all clearances required for a Pyroclassic IV.
Dimensions: W 680mm x D 950mm x H 250mm
Mini Raised Table & Reversible Woodbin:
Ideal for installations when a hearth is not required because
the floor itself meets the standards for a non combustible
floor.
Dimensions: W 480mm x D 680mm x H 250mm
Orange x15
Sky Blue
Mamba Green
GET COLOURFUL
The Pyroclassic IV is for lovers of colour! Choose from more than
100 colours, from bold and bright to classic neutrals. All panels are
easily interchangeable so you can update your fire to match your
home whenever you like.
Visit our website to download the latest colour charts.
WETBACK
Our 3.7kW high output wetback uses
an open grid format which increases
the surface area of the wetback
ensuring consistent hot water.
LOG RACK
Enjoy the convenience of this stylish
log rack. Finished in a durable ripple
black powder coat.
Dimensions:
W 800mm x H 1000mm x D 300mm
COOKTOP OVEN
WALL SCREENS
All wall screens are powder coated in our full colour range.
Their use significantly reduces the minimum required safety
distances. See the back of this brochure for more info.
Make the most of your Pyroclassic
cooktop with this handy oven, mitt
and trivet set.
Sizes:
Standard: W 550mm x H 800mm x D 25mm
Corner:
W 900mm x H 800mm x D 25mm (pair)
Custom: We can accommodate most sizes. Screens
larger than 1m2 will incur additional charges
from the standard custom price.
BONUS ESSENTIALS KIT
To say thank you for choosing Pyroclassic Fires, we include a
FREE Pyroclassic Essentials Kit, valued at $115, with every fire!
This set contains a rake and shovel, re-usable fire starters and
moisture meter.
Please visit our website for more information www.pyroclassic.co.nz
PYROCLASSIC IV TECHNICAL SPECIFICATIONS
900mm
900mm
B
C
H
900mm
I
G
PARALLEL
INSTALLATION WITH
PROTECTED WALLS
Optional Pyro
Combo Raised
Hearth & Woodbin
(H 250mm)
A
E
K
E
J
CORNER
INSTALLATION WITH
PROTECTED WALLS
F
PYROCLASSIC IV WITH WALL SCREENS OR
WITH NON-COMBUSTIBLE WALLS
D
J
900mm
Optional Pyro
Combo Raised
Hearth & Woodbin
(H 250mm)
F
C
A
B
C
D
E
F
G
H
I
J
K
145mm
105mm
115mm
390mm
300mm
680mm
650mm
245mm
373mm
370mm
530mm
Pyroclassic IV with combustible walls or unprotected walls
480mm
350mm
370mm
550mm
740mm
PYROCLASSIC INSULATING HEARTH
B
Unprotected Wall
480+mm
800mm
The Pyroclassic IV must sit on some form of insulating hearth. If the
hearth is installed flush with a surrounding floor then it must have a
minimum distance of 369mm from the front of the fire to the front
edge of the hearth. The minimum width of the insulating hearth
must be not less than 680mm with the Pyroclassic IV centred from
each side of the hearth.
If the hearth is raised, the floor protector area at the front can be
reduced. For example, the Pyroclassic Raised Hearth & Woodbin is
250mm in height, which means the floor protector area at the front
of the fire can be reduced.
The Pyroclassic raised hearth is a powder coated steel construction
and can be installed directly on to any combustible floor material.
With Pyroclassic
standard wall screen
550mm wide
50mm
ALTERNATIVE INSULATING HEARTH
20+mm suitable insulated board with non combustible top, or
masonry slab with a minimum thickness of 50mm.
INSULATING HEARTH SURFACE HEIGHT FROM COMBUSTIBLE FLOOR
0mm
Height
15mm
25mm
40mm
MINIMUM DISTANCE IN FRONT OF PYROCLASSIC TO HEARTH FRONT EDGE
E
Depth
370mm
345mm
320mm
300mm
WALL SCREENS
Our wall screens will significantly reduce the minimum required safety
distances. The side edges of the sheet metal are folded in (forming a
right angle), creating a 25mm air gap. Combustible walls are protected
from the hottest parts of the fire, which are the top plate and first
sections of the flue. The open bottom edge of the screen sits 50mm
below the top of the Pyroclassic IV and extends upwards. Cool air
enters from below, runs up between the screen and the wall and exits
out the top.
FIRE DIMENSIONS SHOWING WETBACK FIXING LOCATIONS
370mm if flush with floor
105mm Wall to back
of Pyroclassic IV
BACK TO WALL & NO SIDE WALLS
SPECIFICATIONS
Dimensions:
Weight: Fire chamber volume: Temperature: Maximum heat output: Useful heat output: Fuel consumption: Emission rate: Efficiency rate: Air control: Start up control: Cooktop area: Flue diameter: L 650mm x W 455mm x H 625mm
Approximately 140kg
20.8 litres
800˚C - 1100˚C (1500˚F - 2000˚F)
>15kW
2kW - 8kW
1.1kg/hr
0.3g/kg (Dry and Wet)
74% space heating (Dry)
65.3% space heating with
18% water heating (Wet)
Primary & secondary, fully automatic
Manually adjustable Turboslide
0.26m² - 10mm thick plate
100mm standard (4”)
Pyroclassic IV side profile
with wetback fixing heights
510
570
Freestanding model only. No insert available.
WARRANTY: The ceramic firebox in the Pyroclassic IV is warranted for
15 years against defective material or workmanship, provided the fire
is used and installed according to the manufacturer’s operating and
installation instructions. All other items are warranted for 12 months.
This warranty does not cover damage or failure caused by tampering,
carelessness, abuse or misuse. NOTE: The warranty only applies to
the original owner and cannot be transferred.
Disclaimer: +/- 2mm measurement variation.
THE PYROCLASSIC IV HAS BEEN TESTED TO THE FOLLOWING STANDARDS
AS/NZS4012:1999 • AS/NZS4013:1999 • AS/NZS4012:2014 • AS/NZS4013:2014
AS/NZS2918:2001 • EN13240:2001 • A2:2004 • ECan authorisation: 121121 (Dry), 121122 (Wet)
PYROCLASSIC FIRES ARE A
MEMBER OF THE NZHHA & AHHA