Catalog - Teledyne Controls

Catalog CA1050
TELEDYNE CONTROLS
12333 West Olympic Boulevard
Los Angeles, CA 90064
1-888-246-STAR
(7 8 2 7 )
TELEDYNE CONTROLS
Airfone Service
Copyright© 1998 Teledyne Controls
ALL RIGHTS RESERVED
Copyright® 1998 GTE Airfone Incorporated
ALL RIGHTS RESERVED
REV. 9/00 1.5K
Everything you need
to get down to business.
The MagnaStar digital airborne telephone
is the most advanced and most popular
digital airborne telephone system available
for business aircraft.
®
M
MagnaStar® C-2000 is a complete
communications package. The system
includes an Air Radio Telecommunications
Unit (ARTU), antenna, a duplexer, and
a mounting tray. And, of course, you
customize the system to include the
necessary handsets and cradles.
Upon installation, you’ll have instant
direct dial capabilities. You’ll be able to make conference
calls, multiple calls, seat-to-seat and cabin-to-cockpit
interphone calls. You’ll be able to receive incoming calls, and
you’ll be able to store frequently called numbers for easy
speed dialing. With 9.6 KBPS data speeds you will be
connecting faster than any other
airborne phone available.
With coast-to-coast coverage
agnaStar systems have been installed in all
types of aircraft from a Beechcraft Bonanza to
a Boeing 747. The MagnaStar system offers a
wide selection of installation components, as
witnessed by this catalog, airborne network
support by Airfone’s advanced terrestrial
communications network, and is backed up by
what has come to be known as the best
customer support in the business.
In late 1996 Teledyne Controls licensed from Raytheon Systems Company the
exclusive marketing, sales and customer support
rights to the MagnaStar airborne telephone
product line for business aircraft. The
MagnaStar system utilizes the Airfone
communications network for its inflight
communications service. Raytheon will continue
to manufacture and repair MagnaStar units for
Teledyne Controls in their Largo, Florida
facility. Teledyne Controls will provide
marketing, sales and product support services
from their Avionics division located in Los
Angeles, CA. Teledyne Controls, Raytheon and
Airfone are working harder than ever to make
MagnaStar the best system available. Teledyne
Controls will continue to utilize the existing
well-established distribution and dealer network
nationwide.
We invite you to call us with any
questions you may have regarding the
MagnaStar system.
Black
Pepperdust
Platinum
Off-White
and automatic uninterrupted
handoffs, you’ll never be out of
Handset Colors
touch again. MagnaStar, the digital
airborne phone you can rely on.
For information or to place orders call
TELEDYNE CONTROLS
1-888-246-STAR (7827)
MagnaStar ® is a registered trademark of Raytheon Company.
Basic
C-2000 System
The MagnaStar® C-2000 digital airborne
telephone system is a complete airborne
communications package designed
specifically for corporate and regional
aviation. Light weight, reliable and rugged,
the C-2000 can be mounted in any
pressurized or non-pressurized location on
the aircraft. The C-2000 system can support
nine (9) independent handset/fax/data with
planned growth to support 50 handsets
positions and provides two air-to-ground
(ATG) channels utilizing the advanced
Airfone service. MagnaStar, the full featured
cabin telecommunications management
system.
Handset
The basic single handset C-2000 system
consists of the following:
• Air Radio Telecommunications Unit (ARTU)
• Mounting Tray
• Duplexer
• Blade Antenna
• Cabin Distribution Bus Repeater (CDBR)
• Call Alerting Switch (CAS)
• Telephone Handset
There are a number of optional system components, handset styles and colors that
allow you to custom tailor your installation
to fit your communication system requirements.
RJ-11 Jack
CDBR-2
RJ-11 Jack
CDBR-2 supports 2 independant
fax and/or data positions and also
provides 1 standard digital port.
INMARSAT
SATCOM
EQUIPMENT
CEPT - E1
Compatible
AIU
Analog
SATCOM
or
HF
Radio
Handset
C-2000
ARTU
CDBR-1
CAS
TRAY
Signaling
Device
Duplexer
28 VDC
Antenna
= Optional Equipment
Simplified C-2000 System Diagram
1
Basic
C-750 System
Both handset models shown
The MagnaStar C-750 Telecommunications
Management Unit (TMU) interfaces with
CEPT-E1 compatible INMARSAT SATCOM
equipment. Additionally, the C-750 may also
interface to analog equipment such as HF
Radio and Analog SATCOM. Lightweight,
reliable and rugged, the C-750 can be mounted
in any pressurized or non-pressurized location
on the aircraft.
Handset
CDBR-2
The basic single handset C-750 system consists of the following:
• Telecommunications Management Unit (TMU)
• Mounting Tray
• Cabin Distribution Bus Repeater (CDBR)
• Call Alerting Switch (CAS)
• Telephone Handset
RJ-11 Jack
RJ-11 Jack
CDBR-2 supports 2 independent
fax and/or data positions and also
provides 1 standard digital port.
C-750
TMU
AIU
Analog
SATCOM
HF
Radio
Handset
CDBR-1
CAS
TRAY
28 VDC
or
INMARSAT
SATCOM
Equipment
CEPT-E1
Compatible
= Optional Equipment
Simplified C-750 System Diagram
2
Signaling
Device
Accessories
-801 ARTU
P/N 724855-801
The C-2000 ARTU is the basic
transceiver/PABX unit, and will support up to
nine (9) individual handsets. Connectors are
included.
Weight 15.4 lbs. Size 6 MCU.
-802 ARTU
P/N 724855-802
The -802 C-2000 ARTU differs from the
basic -801 ARTU by incorporation of a
CEPT-E1 interface. This provides direct
connection to digital SATCOM systems,
cabin management equipment or other
digital data buses while still maintaining
digital ATG capabilities. Connectors and
W12 cable assembly are included.
Weight 15.4 lbs. Size 6 MCU.
C-750 TMU
P/N 724855-850
The C-750 TMU interfaces to both analog
and CEPT-E1 compatible SATCOM
equipment and will support up to nine (9)
individual handsets. Connectors are included.
W12 Cable Assembly shown in picture, must
be ordered separately to allow interface to
CEPT-E1 SATCOM equipment.
Weight 10.0 lbs. Size 6 MCU.
3
Accessories
Tray Assembly
P/N 724868-802
The tray assembly is the mounting
structure for the ARTU/TMU and
provides Power Line conditioning, and
air plenum and fan for equipment cooling
during extreme temperatures. Connectors and W16 cable assembly are
included.
Weight 3.0 lbs. Size 6 MCU
Duplexer
Not required with C-750 TMU
P/N 620317-2
The Duplexer is a passive signal
filter/combiner allowing transmission and
reception from a single antenna.
Connectors are included.
Weight 2.0 lbs. Size 4.5" x 8.3" x 1.0".
Antenna
Not required with C-750 TMU
P/N 902131-1 (6 hole)
P/N 902131-2 (4 hole)
The antenna is a low drag, 1/4
wavelength element suitable for high
performance aircraft. A four (4) hole
version (P/N 902131-2) is available for
direct replacement of most flight phone
antennas. Antenna required for use
with CPI (see page 11).
Connector is not included.
4
Accessories
CDBR-1
P/N 724864-801
The Cabin Distribution Bus Repeater
(CDBR-1) is a tap device that allows for
connection of two (2) digital devices
(handset or CAS) onto the cabin data bus.
Connectors are included.
Weight 0.4 lbs. Size 4.1" x 3.1" x 1.0".
CAS
P/N 725256-801
The Call Alerting Switch (CAS) provides ten
(10) independent switched outputs to control
call annunciation devices (relays, lights,
sonalerts, etc.) for individual or groups of
telephone handsets. One (1) CAS is used
per system. Connectors are included.
Weight 0.4 lbs. Size 4.1" x 3.4" x 1.0".
5
Model 2 Handsets
All Model 2 handsets come with a
standard RJ-11 interface. These handsets
are available in four (4) basic colors; black,
off-white, platinum, and pepperdust (see
inside back cover for color samples). In
addition to color options, there are four (4)
different mounting styles; flush mounted,
customized remote cord reel mounting,
curled cord, and bulkhead mounted.
Refer to the following descriptions when
ordering for your specific installation.
Relocatable handset
74" Curled Cord
P/N: 724866-804
98" Curled Cord
P/N: 724866-814
Flush mount bezel
and handset
58” Cord
P/N: 724866-805
6
Model 2 Handsets
Bulkhead mount
bezel and handset
58” Cord
P/N: 724866-806
Custom mount handset
64” Cord
P/N: 724866-807
7
MACH-1 Handsets
All MACH-1 handsets come with a standard
RJ-11 interface. Handsets are available in
off-white, pepperdust and black (see inside
back cover for color samples). There are three
(3) different mounting styles; flush mounted,
customized remote cord reel mounting, and
curled cord. Refer to the following descriptions
when ordering.
Standard flush mount with
bezel 58"cord
P/N: 725729-815
Handset shown IN and OUT of bezel.
Custom mount, 58"cord
P/N: 725729-807
Relocatable, 98"cord
P/N: 725729-814
8
Cable Assemblies
Interface and interconnect cables are available
and can be ordered in varying lengths to custom
configure your MagnaStar C-750 or C-2000
installation. To simplify installation activity, data
cable assemblies are terminated at one end.
Refer to the diagram below to select the specific
length and part numbers.
Cable Selection
(Cable Numbers and Lengths are in Black)
C-750
TMU
or
C-2000
ARTU
W1
W7
W7
422629-801 (15')
422629-811 (15')
422629-811 (15')
or
422629-802 (30')
or
422629-812 (30')
or
422629-812 (30')
CDBR-2
or
422629-803 (50')
422613-801 (8')
To Cord Reel Handset
W12
W6
422657-801 (2')
CEPT-E1
Equipment
AIU
or
422629-813 (50')
RJ-11 cables may be
purchased locally
REMOTE
RJ-11 JACK
REMOTE
RJ-11 JACK
422613-802 (8')
To Relocatable Handset
W6
CAS
422635-801 (12')
W10
9
CDBR-1
or
422629-813 (50')
Optional
Equipment
The following is a list of optional equipment that can
be added to the basic MagnaStar C-750/C-2000 system.
Interfacing to various SATCOM systems as well as a remote
operator/switchboard position for larger VIP configured aircraft is available.
AIU
P/N 724986-801
The Analog Interface Unit (AIU) provides for the
connection of analog equipment such as SATCOM, HF
radio and PA systems to the MagnaStar C-750/C-2000
system. Connectors are included.
Weight 0.8 lbs. Size 6.5" x 3.1" x 1.0".
CDBR-2
P/N 902205-803
The Cabin Distribution Bus Repeater, model 2 (CDBR-2) is
recommended for direct analog FAX and Data connections.
The CDBR-2 provides handsfree fax machines and modem
data operation and supports 2 wire to 4 wire interface for
use connecting analog handsets such as the WH-10 to the
system. The CDBR-2 also retains one standard connection
for a MagnaStar digital handset or Call Alerting Switch
(CAS).
Weight 2.0 lbs. Size is 5.0" x 8.5" x 1.8".
10
Optional
Equipment
CHIP
P/N 726029-801 (Gray or Black)
The Cockpit Headset Interface Panel (CHIP) is a dzus-rail
mounted device which interfaces the MagnaStar® C-2000 and
C-750 to the aircraft cockpit headset audio system. The CHIP
provides remote dialing capability to the MagnaStar via the
CDBR-2. This direct analog interface allows the cockpit crew
to maintain full headset utilization for both MagnaStar calls or
normal headset operation at the touch of a button. The CHIP’s
dimensions are identical to the C-118 FLITEFONE® Cockpit
Controller thus providing ease of installation. The CHIP
features back lighting, off-hook indicator, flash-hook switch
and call alerter output switching. The call alerter output is a 12
volt DC signal which can be used to drive a signaling device
such as a Sonalert or light annunciator. The CHIP requires
connections to an available CDBR-2 analog port which should
be configured for 4-wire audio.
Weight 0.7 lbs.
CPI
CPI - P/N 726308-802
ANTENNA - P/N 902131-2
The Cellular Phone Interface (CPI) will add ground
cellular phone technology to MagnaStar ® equipped
aircraft. Cellular phone calls can be made or received by
any of the installed MagnaStar handsets, even the
Cockpit Headset Interface Panel (CHIP). All of the
MagnaStar PABX features will be available, including call
conferencing, call transfer, call hold and more. Its weight
on wheels connection automatically disables cellular
phone operation once airborne. The CPI requires 28 VDC
input and connections to an Analog Interface Unit (AIU)
and antenna. AIU and antenna are not included with CPI.
(See page 4 for antenna recommendations.)
Weight of CPI 2.8 lbs. Size: 10” X 5.3” X 2.7”
11
Test
Equipment
Test Set
Dealer Version
P/N 725481-801
Customer Version
includes MMT Software and Cable
P/N 725481-802
The field test set was designed to assist with final
system test and commissioning of the MagnaStar
system. The set gives the installing technician the
ability to upgrade ARTU/TMU software while the
unit remains installed on the aircraft.
Loop Around Test Set
Included in test set -801/-802 above
P/N 902185-802
The Loop Around Test Set is a battery operated
test set used to test the entire antenna coax
installation of a C-2000 system. The Loop Around
Test Set must be used in conjunction
with MMT software which is included with the
-802 Customer Test Set (shown above).
Test Cable
Included in test set -801/-802 above
P/N 422704-801
This cable connects to the Loop Around Test
Set and clamps onto the C-2000 antenna.
12