Trouble Shooting AirBoard: -‐ Reset / Recalibrate board Place the

 Trouble Shooting AirBoard: -­‐
Reset / Recalibrate board Place the AirBoard flat and level on the floor. With the Remote Key. Press and hold the middle Settings button. The central ‘F’ will flash red. Then press and hold the middle Settings and bottom Mode buttons together for 5 seconds. The AirBoard will beep when it has completed recalibration. -­‐
Change speed setting With the AirBoard turned on, but on a flat even surface (with no user stood on it), press the bottom Mode key. The board will beep to confirm the mode change. -­‐
Experiencing slow turning If you experience the AirBoard turning faster one way than the other, it is likely to be a result of the gyro’s not communicating as effectively as they should. A simple reset / recalibration should fix the issue. Alternatively, try to switch Mode settings as the AirBoard may be in the slow setting. Do Not: -­‐
-­‐
-­‐
-­‐
The AirBoard is not designed for someone to stand on the central neck. The AirBoard is not designed to be taken ‘off-­‐road’ or off drops. The AirBoard is designed for one rider only (please see Max Weight). The AirBoard is not designed to be exposed to water.