BERETTA 2013 PROSHOP

BERETTA
2013
PROSHOP
FIREARM
ACCESSORIES
C a l l
1 . 8 0 0 . 9 2 9 . 2 9 0 1
Tactical Cases & Trollies
A-C. Beretta Tactical Explorer Cases and Trolley
Protect your handguns and accessories from rain, humidity and sand. Made of
resistant injection molded polypropylene, the Tactical Explorer Cases and Trolley
are completely waterproof and watertight and will keep your valuable firearms safe
even in tough outdoor conditions. Inside, layers of “pick and pluck” foam let you
A.
customize the bottom of the case to accommodate your handguns and accessories in your preferred layout while keeping them firmly in place during travel.
Choose between the model for one pistol (2712B), for two (4412B) or
the Tactical Trolley (5112B), which features wheels and a retractable
handle for convenient transport. TSA approved. Made in Italy.
A. 2712B .....Single Pistol Case ...... 12˝x 10½˝ x 5¾˝ ........4 lbs......$79
B. 4412B .....Double Pistol Case .... 18½˝ x 16½˝ x 6˝........8.5 lbs....$149
C. 5122B .....Tactical Trolley ......... 21½˝ x 14˝ x 9¾˝........15.5 lbs. ....$209
D. Accessory Case for Tactical Trolley
Designed to fit snugly inside the Beretta Tactical Trolley, the Accessory Case is a
removable soft briefcase that offers you customizable compartments with Velcro
spacers. A veritable case within a case, it allows you to easily carry the most critical
items to your shooting station without lugging around the whole trolley; also, you can
set it up as a convenient shelving unit within the trolley. Rubber handle, detachable
strap, no-noise zipper. Made in Italy.
D. BAG-B............................................ 20˝x 11˝x 5½˝............2.75 lbs. ...........$59
D.
C.
D.
C.
Accessory case can be used with or
without the Tactical Trolley.
B.
A.
2
© 2013 Beretta USA Corp., Accokeek, Maryland. Prices are valid through March 31, 2013.
www.berettausa.com
T
he same attention to detail and manufacturing excellence
that Beretta puts into its legendary firearms is given to the
products that accessorize them. In the Beretta Pro Shop you can
be confident that the add-on, replacement or upgraded part
you are purchasing works perfectly with your Beretta firearm,
whether the accessory is from our factory or from one of our
trusted partners.
In our Pro Shop you will find a wide selection of parts
for your shotgun, pistol and rifle. We offer a variety of grips,
magazines and holsters for Beretta pistols, accessories to customize your U22 Neos, numerous tactical options for your CX4
Storm and much more. We are continuing to develop Pro Shop
to complement our complete product line of firearms. Visit our
website at www.berettausa.com to shop our full line of Pro
Shop Gun Accessories.
Table of Contents
2 .... Tactical Cases
4 .... 92 Series Pistol
8 .... PX4 Seies Pistol
11 .. Nano Pistol
12 .. Small Frame Pistols
13 .. U22 Neos Plinker
14 .. CX4 Series Plinker
15 .. Burris Optics
16 .. Sako Rifle
17 .. Shotguns
A. Tactical Explorer Trolly for Long Guns
Whether it is for trips to the range or long-distance flights, the ultra-tough
Tactical Explorer Trolley for Rifle will keep your valuable rifle and accessories
safe and dry. Designed to accommodate one scoped rifle and accessories,
the trolley is completely waterproof and watertight, offering you the same
resistance against rain,
A.
humidity and sand as
all the cases in our
Tactical Explorer line.
Inside, layers of “pick
and pluck” foam allow
you to customize the
bottom of the trolley
to accommodate your
rifle and accessories in
your preferred layout
while keeping them
firmly in place during
travel. The trolley is
TSA approved and has
wheels for easy carry. Made in Italy.
A. 9413B .............. 39˝x 16½˝ x 6¼˝ ............... 17 lbs. .............. $259
A.
B. Range Bags
Grab them by their padded handles or carryy them over
your shoulder. The bottom of the
he bag features Beretta’s
gun-protecting thermoshield padding.
dding.
Easy-opening top access with plenty
enty
of inner pockets and zippered
exterior pockets. Larger bag
holds six cartridge boxes;
smaller bag holds four. Heavyduty nylon. Color: 0999)black.
Imported.
BS120189 .....131⁄2" x 8" x 10""
large......$65
BS690189.....11" x 6" x 8"
small.....$54
3
C a l l
1 . 8 0 0 . 9 2 9 . 2 9 0 1
92 SERIES GRIPS (Grip screws sold separately.)
A. 92 Series Aluminum
Checkered Grips
B. 92 Series
Rubber Grips
Designed for maximum purchase with
an aggressive checkering pattern. Laserengraved Trident logo and deep, durable
black finish. Made in USA. See chart
below for details.
Set of sleek, textured non-slip
rubber grips fit F & FS models
(excluding Stock, Combat, Billennium, Compact and Compact Type M). Made in USA.
See chart below for details. B.
A.
C. 92 Series Wood Grips
Genuine walnut grips with elegant oval
checkering and the Trident logo. Fit FS
models (excluding Stock, Combat, Billennium, Compact and Compact Type M).
Made in Italy. See chart below for details.
C.
A.
D. 92 Series Wood
Grips with Medallions
Elegantly checkered genuine
walnut grips with inset medallion.
Fit models 96, 92FS, 92A1, M9,
M9A1, Brigadier, Centurion, Elite.
Made in Italy. See chart below for
details.
D.
A.-D. 92 SERIES GRIPS
ITEM NUMBER PRICE
A. Aluminum Checkered Grips
JGALU92BLK
$79
B. Rubber Grips
UD6A0211
$29
C. Wood Grips
E00219
$53
D. Wood Grips with Medallions
JG92FSW
$50
Over Mold Grips
JG92LG302
$299
Over Mold Grips Military Stand.
LG-402M
$359
92 Series Grip Screws
EU00017
$9
Allen/Hex Grip Screws Kit
EU00015
$9
92 SERIES MAGAZINES
E. 92 SERIES MAGAZINES
ITEM NUMBER
PRICE
92FS and CX4 Factory Magazine 9 mm 20 rds
1385979/1
$57
92FS Factory Magazine 9 mm 30 rds
C89282
$40
M9A-92FS Magazine 9mm/15 Sand Resistant
JM9A115
$55
92FS Factory Magazine 9mm 17 rds
JM909P17
$35
92FS Factory Magazine .40 S&W 12 rds
JM904P12
$35
92FS Factory Magazine 9mm 15 rds
JM92HCB
$43
Factory 96 Magazine .40 S&W 11 rds
JM80399HC
$43
Beretta Factory 96 Magazine .40S&W 10 Rds
JM96
$40
Beretta Factory 92FS Magazine 9mm 10 Rds
JM92F
$40
Beretta 92FS Magazine, 9mm, Stainless Steel Look, 10RD
C80405
$24
Beretta 92FS Magazine, 9mm, Stainless Steel Look, 15RD
C85993
$25
Our pistols expert explains which mags
fit which 90 Series firearms. Scan this QR
code with your smartphone to watch the
video, or visit berettausa.com.
4
E.
See all our magazines:
berettausa.com/mags
www.berettausa.com
92 SERIES PARTS
D. Beretta 92/96 Target
Adjustable Rear Sight
A.
For a video demonstration
on how to change a mag
catch from the left to right
side, scan this QR code
with your smartphone.
A. Beretta 92/96 Steel Oversize
Catch, Mag Assembly
Cut down on your tactical reload time
with this oversize magazine catch, which
also makes it easier to feel and operate the
mag-release button while wearing gloves. It
fits all 92/96 series double-stack magazine
pistols and is installed in minutes without
gunsmithing. Black. Made in Italy.
UD8A0203 .................................... $29
Customer Review:
“This is great for anyone concerned about
keeping their gun in the proper grip, and on
target. A key upgrade for quick mag changes.”
The target adjustable rear sight brings out
the full accuracy potential of your 92/96
pistol. Please visit berettausa.com for instructions on how to install this accessory.
E00169 .........................................$57
D.
E. Beretta 92/96/98 Elite II
Skeletonized Hammer
Give your Model 92/96/98 an aggressive
look. Beretta factory original skeletonized hammer not only looks cool but can
improve cycle time because of the lighter
weight. Fits: Beretta 92FS/96FS/98FS/Brigadier/Target. Made in Italy.
UD5A0584 ................................... $34
F. Factory 92FS Steel Parts
These Beretta factory steel components allow you to replace the polymer
parts in your 92-series Beretta pistol
with solid steel. The set includes: 1) recoil guide rod, 2) safety lever assembly,
3) trigger, and 4) magazine release assembly. All parts are made in Italy and
come with a durable black finish. They
will fit the following models without
any gunsmithing: 92F, 92FS, M9, Elite,
92A1,* M9A1. *Note: item (1), the
recoil guide rod, does not fit the model
90-TWO and 92A1.
E00706 ..................................... $69
E.
F.
1.
2.
3.
4.
B.
G. Beretta 92/96
Steel Trigger Set
B. 92 Barrel 9mm Standard
Blued Finish
A true drop-in barrel with finished chamber that does not require any gunsmithing.
A replacement for 92 Series. Features 4.9”
(125mm) barrel with blued finish, chromed
internal finish and standard muzzle. Fits:
96/96A1/90-TWO/Vertec/Brigadier/Elite.
Made in USA or Italy.
UD80989 .................................... $129
The set includes trigger, trigger spring
and D-version hammer spring, enabling
you to replace the composite trigger of
your pistol with one made of solid steel.
It fits all Beretta full-sized series 90 pistols. Note: it will not fit Billennium, Steel
One or Combat models.
E00691 ........................................$25
G.
1.
H.
C.
C. Beretta Steel Recoil Spring
Guide and Recoil Rod
If you shoot a lot, it pays to upgrade to a
steel recoil rod and spring. Fits all Beretta
full sized series 90 pistols. It does not fit
the 92A1, 96A1 and the 90-TWO. Will not
fit Compact, Centurion, or Compact Type
M pistols. Made in Italy.
EU00031 ....................................... $21
2.
H. Beretta 92/96
Locking Block Kit
3.
4.
This kit helps your 92/96 series pistol stay in perfect working
condition after many years of hard use. Includes: 1) recoil spring,
2) locking block, 3) locking block plunger, and 4) locking block pin.
Note: 2 and 3 are 3rd generation and must be used together.
LE9201
................................................................. $36
5
C a l l
1 . 8 0 0 . 9 2 9 . 2 9 0 1
92 SERIES ACCESSORIES
A. Beretta Laser Grips
A.
The Beretta Laser Grips have dual sideactivation buttons, rubber-over-mold
construction, fully adjustable windage and
elevation, a master on/off switch and a Beretta
trident logo! The lithium batteries (included)provide more
than four hours of on-time use with a five-year shelf life. Applicable
for Beretta Models 92 and 96 large frame, including Centurion, Elite II,
and Brigadier. Technical specifications: beam intensity is 5-mw peak, 633-nm,
class IIIa laser, the maximum output allowable by federal law and technology.
Dot size approximately 0.5” diameter at 50 feet. Made in USA.
JG92LG302 ..................................... Standard ........................................$299
Military Laser Grips (not shown)
B. Beretta 92F/FS
Rail System
A nice solution for quickly and
easily adding versatility to pistols
without a Picatinny rail. The easy
to fit and remove system clamps
onto the trigger guard area and is
secured by Allen screws, providing
stability for mounted light or laser.
CNC machined from aviation
grade Aluminum. Weighs just 1.410
ounces. Imported.
TDIBERA1 .......................... $48
B.
These grips are designed specifically for the demands of military use. This model
exceeds standards for waterproofing, dust/salt/fog resistance and high/low temperature operation. Compared to our standard Lasergrips, this model features
a more prominent rubber-overmolded front activation switch and aggressive
textured side-panels, which are designed for maximum control with or without
gloves. Made in USA.
LG-402 .................................... Military Standard ................................... $359
C. LaserMax Guide Rod Laser
Proven in more than 17 years of street
and combat experience by SWAT,
Special Forces, agencies,
Presidential Security Services
and other top-tier commands.
This internal guide rod laser is the most
technologically advanced, hardened laser system you can buy.
Because the laser sight installs as close to the barrel of the
firearm as possible, it ensures the closest, most consistent
relationship between your point of aim and point of impact over all
shooting distances. It’s your call if the beam is on or off—a must in situations when you don’t want to reveal your position. A convenient “on/
off” switch is easily activated by right-or left-handed shooters, without
altering the grip. Fits full size Beretta 92 (M9), Beretta 96 and Beretta
Vertec (does not fit Beretta’s 92A1, 96A1, or 90-TWO). Made in USA.
LMS-1441...............................................................................$399
D. .22LR Conversion Kit
Enjoy thousands of rounds of practice
with your 92 series pistol without
breaking the bank. Our bestselling
conversion kit transforms your 92 series
pistol into a .22LR practice handgun
that looks and handles like its centerfire
counterpart. Included: steel .22LR barrel,
aluminum slide with adjustable sights,
FS manual safety and firing pin block
device, recoil spring guide
and spring, magazine loader
and 10 round magazine. No
gunsmithing required.Visit
berettausa.com for
a list of compatible models.
J9022PK ...................$389
6
C..
D.
www.berettausa.com
92 SERIES ACCESSORIES
A. Beretta Snaps Leather Black Holster
Great-fitting right hand belt holster positions exactly where you
want it and makes for comfortable all-day wear. Black leather
holster features an open back end and barrel end. Double snap
fasteners secure holster to belt without requiring you to take the
belt off first. Max belt width: 1.57". Made in Italy.
FO5000200099 ...............................................................$57
A.
B. Hybrid Holster
Your Beretta 92/96 will literally disappear as you wear this insidethe-waistband holster designed for maximum concealability and
comfort. Made by hand
specifically for Beretta, it is
adjustable for ride depth and
cant. Also, it will distribute
B.
the handgun’s weight evenly
against your body rather
than downwards, making
B.
your 92/96 feel considerably
lighter. Leather-backed
and ventilated for soft
and cool concealment.
Right hand only.
GI03INCIMRH ............ $64
D. Tactical Belt
Our dual layered 1½" belt is hand-crafted from Premium Grade A
bull hide from the finest tanneries available (the thickness will be a
tad shy of ¼"). Extremely comfortable, this sturdy belt will carry a
firearm plus accessories all day without sagging. Stitched with heavyduty nylon thread. This belt will last for years and continue to function as intended. Made in USA.
BL0104130999 .............. Black Even sizes 34-44......................$99
BL0204130802 .............. Brown Even sizes 34-44 ....................$99
C. Mesh Logo Cap
Our black Beretta cap, with breathable mesh
sides and back. Moisture-wicking Q3 fabric
on the front panels
nels
delivers complete
ete
comfort no
matter how
hot the action.
Cotton/polyester. Color:
999)black.
Imported.
C.
BC969143
One Size Fits Most ...................... $20
E.
E. Beretta Magazine
Speed Loader
D.
F.
This compact, lightweight pistol speed
loader makes it easy to load magazines to
the maximum capacity. No more leaving the
last round out because it is too hard to get
in. Faster loading means you will maximize
your shooting enjoyment. It’s designed to
load most 9mm & .40 S&W caliber, double
stack magazines, of any length. Made in Italy.
JMSLDS ...........................................$9
F. Beretta Holster for 92FS/96/92A1/ 96A1 –
Right Hand
Thanks to a reduced spacer and size, this thermo-formed ABS holster
is ideal for concealed carry for police, military and sport (IDPA, IASC).
The Paddle Belt attachment allows you to carry the holster without the
belt, while ensuring stable extraction of the pistol. The High Ride System
can be used with belt widths from 1.4" to 2.2" (3.5 – 5.5cm). Holster
comes with Paddle Belt and High Ride System. Made in Italy.
FO8000170999 ................................................................. $49
F.
7
C a l l
1 . 8 0 0 . 9 2 9 . 2 9 0 1
PX4 SERIES LASERS
A. Tactical Classic Cap
A.
Basic black or non-glare silver in a soft, comfortable allcotton cap. Adjustable back strap for a custom, comfort
fit. Low-profile Beretta embroidery along the visor. Colors: 0999)black, 077A)silver. Imported.
BC012908............One Size Fits Most....................$20
black
silver
B.
B. LaserMax Genesis Rechargeable
Green Laser: The First of Its Kind
The first laser that combines a compact and ruggedly
durable green laser with a battery that’s rechargeable.
And it fits virtually any firearm with an accessory rail,
including Beretta’s PX4 Compact and Storm Compact.
The green laser is visible during any level of lighting,
ghting,
both day and night. With Genesis, you don’t hav
have to
worry
battery standing in your way when
orry about a dead batte
you need a laser the most. Battery life: 2.5 hours. Micro
USB port for easy charging; power supply included.
Made in USA or imported.
LMS-GEN-B ......................................................$249
C.
C. Uni-Max Micro Red Laser
Though it fits virtually any firearm with an accessory
rail, this ultra lightweight, compact laser is perfect for
Beretta’s Px4 Sub-Compact. The durable design features
a bright 5mW constant red beam, automatic 10-minute
shutoff, and dual tap-on activation switch for right, and
left-handed shooters. Quick and easy installation. User
adjustable for windage and elevation. More than 5 hours
of battery life. Made in USA.
LMS-MICRO-B ................................................. $129
D. Crimson Rail Master White Light
D.
This instantly-activated tactical white light makes it easy to
see your target in nighttime conditions. Produced by industry leader Crimson Trace, the unit is installed in a matter
of minutes on any handgun equipped with a Picatinny or
Weaver rail. While producing a bright light, the unit is small
and does not interfere with the balance of your firearm.
Light activation modes are: Constant On, Momentary,
Strobe (or Dazzler). Made in USA.
CMR-202 .....................
.............. $129
E. & F. High Performance Bags
Effortlessly carry boxes of ammo to the range—plus your
earmuffs, eye-protection and accessories—with these compact bags from our High Performance line. Constructed of
heavy-duty nylon, they offer plenty of inside space and outside
zippered compartments for all your range needs, plus a
detachable shoulder sling and a padded handle for easy carry.
Choose between our Range Bag and Range Bag With Bottom
Compartment. Color: 0501. Imported.
E ...BS200189 ....... Range Bag With Bottom Compartment
13" x 12" x 14"........................... $90
F ...BS230189 ........Range Bag
11" x 6" x 8"................................ $59
8
E.
F.
www.berettausa.com
PX4 SERIES PARTS
A. Adjustable Rear Sight & Front Sight
Make more accurate shots with this three white
dot system. Fits on: PX4 Full Size, Compact, Special
Duty. For the installation we suggest using tool code
# UD6A0027, PX4 and 8000 Rear Sight Tool or have
the installation performed by an Authorized Beretta
Service Center.
E00457 ......................................................... $69
Customer Review:
They are just that deadly accurate, I had them installed by a
gunsmith (highly recommended) on my PX4 .40 S&W full size.
I intend to buy two more
sets of these sights
for my PX4 9mm
full size and my
A.
PX4 .40 S&W
subcompact.
D.
B. Beretta PX4 Magazine Release Kit
(3pcs) High, Medium and Low
Customize your PX4 with a magazine release that
best suits your hand size and grip. Our kit gives you
three easy-install size options, from low to high. Made
in Italy.
E00343..........................$24
B.
C. High Performance Pistol Rugs
Protect your investment with a pistol rug from our
High Performance line. These rugs, with their easyopening, heavy-duty coil zippers can handle all Beretta’s sub-compact/compact pistols. The water-resistant,
scratch-resistant, anti-shock exterior is heavy-duty
nylon with 1½" foam padding inside. Carry handle.
Color: 0501)blue. Imported.
rted.
FO840189 .... 10" .................$22
.........$22
FO910189 .... 8"..................$19
........$19
C.
D. Beretta PX4 Full and Compact
Sized Barrels 9mm
The factory replacement barrels for the PX4 pistol feature
a durable matte black outside and a chromed inside finish.
Compact: 3.2"(3.8" overall length); Full size: 4.0" (4.6"overall length). Both barrels are extended by .6" (15mm) to
accommodate threading. Caliber: 9mm. Made in Italy.
JBPX49CEXT ..............Compact ........................ $169
JBPX49FEXT ...............Full Size ........................ $169
Customer Review:
“After reading the first review I purchased the Magazine
extension and spring for my PX4 Compact 9mm. I tried it
both ways, with the longer spring and the original spring,
it works both ways but the original spring allows the 18th
round to be installed with ease; it gives you a spare spring
as well, win-win. I also agree with the other reviewer that it
looks real cool as well! I recommend it.”
E. Beretta PX4 Series
Extended Magazine Pad &
Spring, 9mm & .40 S&W
Get more rounds out of your magazine with an easy to install pad extension. Increases the capacity of .40 S&W
from 14 to 17 rounds and a 9mm from
17 to 20 rounds. Made in Italy.
E00344 .40 S&W ...........$24
E00345 9mm ..................$24
E.
F. PX4 Tactical Knife
Modeled after the ones currently
used by the Navy SEALS. The PX4
Knife has an aluminum sure-grip
handle, 3.54" 440C stainless steel
blade with a hardness rating of
HRC 56-58. Blade thickness: 0.16"; overall knife length:
8.27". Coated in a non-reflective PTFE black. Imported.
CO7404500900 ............................................ $99
F.
9
C a l l
1 . 8 0 0 . 9 2 9 . 2 9 0 1
Px4 STORM ACCESSORIES
A. PX4 Magazines
Feed your Beretta PX4 reliably through original Beretta factory magazines. Choose between standard, snap-grip for comfortable full-hand grip on your subcompact, or heavy
duty for quick tactical reloads. Made in Italy.
PX4 Series Magazines. Made in Italy.
ITEM NUMBER PRICE
Factory Px4 Storm 9mm 15 rds
JM4PX915
$40
Factory Px4 Storm 9mm 17 rds
JM4PX917
$40
Factory Px4 Storm 9mm 20 rds
JM4PX920
$40
Factory PX4 Storm .40 S&W 14 rds
JM4PX4014
$40
Factory PX4 Storm .40 S&W 17 rds
JM4PX4017
$40
PX4 Storm Sub-Compact 9mm 13 rds Snap Grip
JMPX4S9E
$44
PX4 Storm Sub-Compact 9mm 13 rds Standard
JMPX4S9F
$40
PX4 Storm Sub-Compact .40 S&W 10 rds Snap Grip
JMPX4S4E
$44
PX4 Storm Sub-Compact .40 S&W 10 rds Standard
JMPX4S4F
$40
Factory PX4 Storm Compact 9mm 15 rds
JM88400
$44
Factory PX4 Storm Compact 9mm 10 rds
JM88510
$44
Factory PX4 Storm Compact .40 S&W 12 rds
JM88404
$44
PX4 Storm SD .45 ACP 10 rds Heavy Duty
JMPX4510
$44
A.
B. Quick-Wicking Tactical Sport Cap
Keep your cool in every situation with our quick-wicking, quick-drying, quick-cooling hat.
Tech savvy cap lets fresh air circulate around your head, while it lets heat out. Cotton and
polyester. Color: 0999)black. Imported.
BT129145 ............... One Size Fits Most ....................... $20
B.
C. PX4 Sub Compact Magazine Adapter
C.
A simple, smooth solution that delivers the feel of a full size
pistol. Adapts the full size PX4 magazine for use in your PX4
Sub-compact pistol. No tools required for assembly. Magazine
sold separately. Made in USA.
EU00036......................................................................... $14
D. PX4 Storm Paddle
and Belt Holsters
Left hand version
available!
Ideal for concealed carry. Thanks to its reduced spacer and size, our thermoformed nylon holster is the perfect solution for police, military and sport (IDPA,
IASC) who carry concealed weapons. The high-ride holster system fits a wide
range of belts (3.5-5.5cm) and also comes with a paddle belt attachment. Designed
to stay stable during extraction of the pistol, the paddle lets you carry the holster
without attaching it to your belt. The paddle also allows for quick removal and
reattachment of the holster. Color: 0999)black. Made in Italy.
FO790017 ......................right full size .............................................$49
FO840017 ......................left full size................................................$49
FO830017 ......................right subcompact .......................................$49
FO880017 .....................left subcompact .........................................$49
GI03CNPXC ...................right subcompact .......................................$49
10
D.
www.berettausa.com
NANO Series
A. Nano Grip Frame
Keep your Beretta Nano looking new
with this factory grip frame replacement.
Since the serial number of the Nano is on
the stainless steel chassis, the technopolymer grip frame can be easily exchanged
or replaced like other accessories. Made
in USA.
UD5A0910 ...........black ................$39
UD5A1260 ...........dark earth ........$39
UD5A1259 ...........OD green .........$39
UD5A1261 ...........pink .................$39
A.
B. Handmade Nano SuperTuck Holster
The most comfortable and concealable holster available has bulletproof
construction and a design that won’t give you away. Adjustable for ride
depth and cant, the SuperTuck features new corrosion-proof steel
clips, micro holes for breathability and premium grade leather backing. Mounting spacers behind the clips allow for easier tucking. These
incredible holsters are made by hand
in a small shop in Italy. Steel mounting
hardware for the clip attachments
included.
GI03-INCI-RH ........................... $64
B.
See how easy it is to wear the Nano
SuperTuck holster. Scan this code with your smartphone.
C. Nano 9mm Magazine
Designed for the rigors of concealed carry,
the Nano’s 9mm magazine and follower are
constructed entirely of polished stainless
steel. The polymer floorplate completely
covers the bottom of the Nano’s gripframe to reduce the introduction of foreign
contaminants and create a uniform grip.
Magazine capacity: 6 rounds. Made in USA.
JM6NANO ...... 96 round ...............$34
JM8NANO ...... 98 round ...............$38
C.
E. Night Sites Kit
The Beretta Nano Trijicon Night Sights are among the brightest in
the industry. Filled with tritium gas, they feature a sapphire front
lens that focuses light and is impervious to solvents. The lamps
are silicone cushioned so they can take years of use, and come
with a full warranty. Solid steel, matte black, made in USA.
EU00038 ................................. $105
E.
F. Nano Barrel
Easily replace your Beretta Nano barrel with a genuine factory part.
The replacement 9mm barrel is drop-in and requires no gunsmithing
while giving you the strictest Beretta factory tolerances. Made in USA.
UD5A1009 .................................$86
D. Beretta BU Nano Laser
CENTERFIRE LaserMax
Designed and optimized specifically to fit the
Beretta Nano, this laser sight offers a smooth,
snag-free profile and easily mounts on the
frame without gunsmithing or alterations to
the pistol. It features a red laser with constant
beam, with ambidextrous controls for rightand left-handed shooters; and the patented
Controlled Activation™ system lets you
choose when the laser turns on,
and won’t reveal your position
while holstering, unholstering,
reloading, or moving.
CF-NANO .......$129
Price may be lower
at berettausa.com
D.
F.
11
C a l l
1 . 8 0 0 . 9 2 9 . 2 9 0 1
BOBCAT & TOMCAT Series
A. Grips
Modify the looks of your Beretta Bobcat or Tomcat with elegant walnut grips, or replace your old holster-worn factory
grips with new plastic ones with the classic Beretta logo. Note: the replacement grips do not come with grip screws.
A.
BOBCAT & TOMCAT GRIPS
CODE
PRICE
Beretta GRIPS 21 Bobcat Plastic
JG21P
$15
Beretta 21 Wood Grip with medallion
UD99018
$40
Beretta 3032 Tomcat Plastic Grips
JG32P
$15
Beretta 3032 Tomcat Walnut Wood Grips Set
UD6A0354
$40
B. Mags
These Jetfire, Bobcat and Tomcat magazines enable you to feed your
compact pistol with Beretta-factory reliability.
BOBCAT, TOMCAT, JETFIRE MAGS
CODE
PRICE
Factory Jetfire Mag 21
.25ACP 8RDs
JM955
$31
Factory Tomcat mag 3032
.32ACP 7RDs
JM32
$29
Factory Bobcat Mag 21
.25ACP 8RDs
JM25
$31
C. Tomcat Ankle-Band
Leather Holster
C.
B.
With deep concealment, comfort and quality are paramount.
This premium leather holster
firmly but gently hugs your ankle
with a fully adjustable wide
wraparound strap designed to
minimize friction and feel soft
against the skin. Fully adjustable. Leather safety strap with
Velcro® close. Removable
adjustable calf strap. Black only.
Made inn It
Italy.
taly.
y
FO1700200099
00
0020
020
2000
00
099
9
..................$75
....
..
.......
..
..$7
$7
75
D. Genuine Beretta Gun Oil
Give your guns the ultimate level of protection against corrosion
with specially formulated, authentic Beretta Gun Oil in either a
squirt or spray bottle. Our water-repellent action cleans and seasons your firearm’s surface, reduces wear and friction between
moving parts and offers exceptional corrosion pro-tection, even
from salt spray. Made in Italy.
OL32000209......................25-ml Squeeze Bottle ......................$8
OL36000209......................125-ml Spray Bottle.......................$12
E.
12
D.
E. Portable and Secure Ammunition Box
Precision machined
machin to perfection from a single block of aluminum, the base and cover are
brushed, polished and inspected for perfect alignment by hand. INOX
steel screws with anti-intrusion heads hold the cover, hinges and
An integrated key lock ensures a high degreee
lock in place. A
built-in security. Under the hood, a superof bu
resistant
foam prevents rattling and secures
resi
cartridges
even when the ammo box is
c
held upside down. Made in Italy.
ZERO-22-22LR-BL
.......22lr 100 round......$89
ZERO
www.berettausa.com
U22 NEOS SERIES
• Converts your U22 Neos pistol into a light
and compact carbine
• Includes barrel and stock assemblies and
multipurpose tool
• Allows mounting of optics with an
Aluminum Weaver™-style top rail
• Features a rubber butt plate
• TRUGLO™ orange fiber optic front sight,
fully adjustable aperture rear sight
• Uses pistol’s magazine, slide and receiver assembly
• Now approved for sale in California
A.
A.
A. U22 Neos Carbine Kit
The U22 Neos Carbine Kit adds another level of performance
and modularity to the U22 Neos product line. The kit allows
you to transform the pistol into a handy “plinker” carbine or
lightweight “camp gun,” with easy disassembly and compact
transportation. A barrel/fore-end/top-rail assembly and a stock
unit easily replaces the pistol’s barrel and grip using the supplied
multi-purpose tool. A TRUGLO™ orange fiber-optic front sight
is standard, as well as a fully adjustable aperture rear sight, to
provide fast target acquisition. Both sights are removable and
replaceable. The barrel features a built-in machined aluminum
Weaver™-style rail that allows mounting of optics using standard mounts. Every U22 Neos pistol and carbine may be accessorized with a complete line of products. Made in USA.
JU22CK1 ................................................................... $249
C.
C. Beretta Neos U22 Front Sight Set of 5
Put away the nail polish or specialized paint. Our set of five front
sights (red, white, orange, yellow, black) ensures you’ll always
have the right color to match the conditions or your preferences.
UD6A0283 ....................................................................... $35
D. Burris FastFire
Increases Accuracy
Simplify the act of aiming and
eliminate the need to focus on
and align your sights and target.
The FastFire’s aiming red dot and
target are always in focus and
D.
aligned for the ultimate in accuracy.
Fully waterproof and low mounting, it has repeatedly proven
its toughness on the slides of high power semi-autos, slug guns,
shotguns and high-power rifles. Special bases are available for
most firearms. Lithium CR2032 battery (lasts up to 5 years)
included. Imported.
300233........................................................................$199
Shown assembled with
NEOS pistol, sold separately.
B. Be
B.
B
Beretta
retta U22 Ne
re
Neos
Multi-Purpose
Mul
u ttii-Purpose To
Tool
This unique tool allows
thee uuser to adjust and disth
assemble
aas
ssem
m the U22 Neos
ppistol.
pi
isto It features four tools:
1) Hex
1)
Hee key to remove grip
2) Hex
He key to adjust trigger
overtravel
stop (DLX modo
vert
eels
ls only)
on 3) Screwdriver bit
to adjust
windage 4) Slotted key to
adj
djustt re
rear
ar ssight
ight
ig
ht wind
remove rear sight
blade.
i h bl
d
UD5A0729 ............................................$24
B.
E.
E. U22 Neos .22 LR
10-Round Magazine
Guaranteed for reliable fit and function,
these Beretta factory magazines are
made of stainless steel under strict
tolerances specifically for the U22
Neos. Great as a replacements or
spares, these comfortably loading
magazines will function reliably
for years with proper care.
Made in USA.
JMU22 .................. $25
13
C a l l
1 . 8 0 0 . 9 2 9 . 2 9 0 1
CX4 STORM SERIES
B.
A.
F.
The innovative CX4 Storm
is accurate, soft-shooting
and readily accepts a large
assortment of accessories.
E.
H.
E. Cx4 Storm Bottom & Side Accessory
Rail Kit
A.
A. Cx4 Storm Barrel Shroud
9mm, .40 S&W, .45 ACP
Protect yourself from a hot barrel with our precision-machined, aircraft-grade aluminum shroud.
Fits all CX4 models (when installed will not fit in
original case). Military spec acid-etched for antiglare. As the shroud does not suppress sound, it
is legal to own in all 50 states. Made in USA.
EU00029 .................................................$124
B.
Fully accessorize your CX4 with scopes, lights, lasers
and grips! Used with the side rail provided with the CX4
Storm carbine, this kit finishes out the two side rail positions and adds the bottom rail.
Constructed of super lightweight black polymer. Allows
for attachment of any Weaver
E.
mount assembly. Comes with
four mounting screws.
E00270................$54
F. Cx4 Storm Cocking Handle
Two are better than one. Reversible handle
can be installed on both sides simultaneously.
C79898 .....................................$19
B. CX4 Top Picatinny Rail
Designed of aluminum and finished with black
anodizing. Comes with three mounting screws
and two nutplates. Ideal for scopes, lights, lasers,
grips, etc. Super lightweight. Color: black
E00268 ..................................................... $59
C. Burris AR P.E.P.R.™ Tactical Mounts
The P.E.P.R.™ stands for Proper Eye Position Ready
for combat riflescopes. The ring bases on these
Burris Mounts are milled as a single, tough unit
and provide 2" of forward scope positioning. The
top of the rings feature Picatinny rails for mounting additional accessories.
410343.........1 inch........$79
C.
D. Cx4 Storm Carry Case
Perfect for safely transporting your Cx4 Storm
to and from the range. Constructed of durable
nylon, this padded case is roomy enough even
when you have fully accessorized with a scope,
front grip and tactical light. Two
internal straps keep everything
in place. Carry handle and detachable shoulder strap included.
FO4000140099..................$70
D.
14
F.
G. Cx4 Storm Vertical Long Grip
G.
Super lightweight, bi-function vertical grip allows a natural “Fighting Stance” hold on your
Cx4 Storm. Designed for mounting onto a
standard Picatinny or Weaver rail system. Waterproof compartment for batteries. Molded
from reinforced polymer composite.
EU00004 .........................................$33
Price may be lower at berettausa.com
H. Cx4 Storm Folding Grip,
4 Position
Multi-angular, 4-position folding steady
grip locks at horizontal, vertical, 45°, &
135° positions to give you improved
performance during rapid fire. Lightweight grip is easy to fit and secure on
a Picatinny or Weaver rail. Molded from
reinforced polymer composite. Length
in vertical position: 4½ inches/11.5cm.
No gunsmithing required.
EU00025 ...................................$50
H.
D.
www.berettausa.com
OPTICS
A. Burris Xtreme Tactical SpeedDot Sight
Tactical shooters know all about extremes. The worst
weather. Oppressively bright sun. Pitch darkness. The
repeated recoil of automatic weapons. Whatever
extremes you have to deal with, the XTS-135 Xtreme
Tactical SpeedDot can handle it. It’s waterproof, fogproof and shockproof, and the sight’s high definition
5 MOA red dot has 11 brightness settings to adapt
to the full range of light. Matched up with Burris XTR
Rings, the tough little sight can be mounted ultralow for superior compactness or high enough to
clear iron sights. Weight: 5 ounces. Matte black finish.
Imported.
300205............................................................ $239
B.
C. Burris Xtreme Tactical Rings
C.
One look and you know Xtreme Tactical Rings are all
about point-of-aim security and durability. The superstrong yet surprisingly lightweight, six-screw aluminum
rings anchor scopes in place on any Picatinny rail or
Weaver-style base to deliver unfailing return-to-zero.
A.
B. Burris Speed Dot 135 Red-Dot Sight
A sight that holds up to brutal punishment and delivers a
crisp, perfectly round, bright, adjustable brightness dot. The
rugged, nitrogen-filled 35mm main tube is waterproof and
fog proof. A huge field-of-view provides fast target acquisition and the fully coated lenses offer a crisp, clear, nonreflective sight picture. Featuring 11 brightness settings, it is
available in either a 3MOA size dot for precision shooting
or an 11MOA dot for super-fast action shooting. Includes
Weaver-style mounting rings and an easy-to-find #2032
camera battery with a 200+ hour life at the highest setting.
Matte black finish.
300200 ....................................................................$198
C. BURRIS RINGS
ITEM
NUMBER
PRICE
Burris - Xtreme Tactical Rings NB: TWO RINGS Medium 1/2"
420162
$59
Burris - Xtreme Tactical Rings NB: TWO RINGS High 3/4"
420164
$59
Burris - Xtreme Tactical 1 Inch
Matte Black High 3/4" Height
Two Rings
420182
$59
D.
D. Steiner 8x30 Military/Marine Binocular
A tough, compact binocular that offers plenty of magnification, rainproof construction, and maximum versatility.
After years of use in a variety of settings—from mountaintops to deep canyons, aboard and ashore—Steiner’s
refined design offers everything for the sportsman,
whether spotting game or exploring nature. Exceptionally clear, bright, powerful and field-rugged, these binoculars feature Steiner’s unique auto-focusing that puts all
the action in focus at once. Durable rubber armoring;
guaranteed not to fog or leak internally (10-year limited
warranty). Long eye-relief (20mm) for eyeglass wearers.
Field of view: 360 feet at 1,000 yards. 4.6"L x 6.8"W x
2.4"H. Made in Germany.
280S................. $239
See more optics at:
at: berettausa.com/opticss
15
C a l l
1 . 8 0 0 . 9 2 9 . 2 9 0 1
SAKO ACCESSORIES
A.
B.
A. Sako TRG Picatinny Rail LOW PROFILE
This Low Profile Sako rail is an accessory Picatinny adapter for Sako TRG,
compatible with USA Mil-Std 1913. By installing this adapter on the top of
the Sako TRG action, onthe rifle can be used scope mounts built for the
Picatinny rail.
STRLPP ..................................................................................... $330
B. SAKO TRG
22/42 Muzzle Brake
Screw-on flash eliminator/muzzle
brake. Asymmetrical construction
minimizes sand/dust puffing when
shooting.
S5740412...........................$199
C. TRG SCOPE MOUNTS
Quick detachable, machined for
a perfect fit on the TRG receiver.
Will not cause loss of zero when
remounting. Solid steel. Made in
Finland.
C.
C.
C. TRG SCOPE MOUNTS
CODE
Sako TRG Quick Detachable Optilock - Medium Height
S5740327
Sako TRG Quick Detachable Optilock - Medium Height
S5740328
Sako TRG Quick Detachable Optilock - H/L
Sako TRG Quick Detachable Opitlock -H/L
D.
WIDTH
PRICE
35.5 mm
1 inch daimeter
$450
36.5 mm
30 mm diameter
$450
S5740326
40.5 mm
1 inch diameter
$450
S5740325
32.5 mm
30 mm diameter
$450
D. Sako TRG 22/42 Emergency Rear Sight
Steel construction. Two position, folding peep aperture. Features recoil stop and mirage strap attachment capabilities. Note: This sight will only fit the Sako TRG 22/42 rifles.
S5740311...........................................................$239
E. Sako TRG 22/42
Emergency Front Sight
Steel construction. Adjusts for windage
and elevation. Adjusting tool and all
mounting screws included. Note: This
sight will only fit the Sako TRG 22/42
rifles with the
phosphatized
finish. The barrel
on the phosphatized models is
machined with a
groove to allow
for the fitting of
E.
the Emergency
Front Sight.
S5740321.................................$239
F. Sako TRG 22/42 Bipod
This bipod lets the rifle “hang” below the hingepoint offering very steady shooting position even
with large and heavy scopes on the rifle.
S5740495.................................................. $548
F.
G. Sako TRG Magazine, Blued
These durable steel magazines are straight from
the Sako factory. Choose your model and caliber
from the table. Made in Finland.
S574038.................................................... $250
G.
16
MODEl CODE
ACTION
TRG 22
S5740384
TRG 22
TRG 42
S5740387
TRG 42
S5740385
CAPACITY
CALIBER
PRICE
10
308 Win
$250
TRG 42
7
300 Win Mag
$250
TRG 42
5
338 Lapura
$250
www.berettausa.com
LONG GUNS
A. Burris Eliminator™
LaserScope
Your days of losing sight of your trophy
Other Burris binocs and
while guessing yardage and holdover are over.
scopes can be found at:
In a split second, the Eliminator ranges the
berettausa.com/burris
target, calculates the trajectory, and illumiA.
nates the perfect holdover. Starting with the
field-proven and bright crystal-clear optics of the original Burris LaserScope,
ope the Eliminator provides a sophisticated
yet very simple and accurate means of tailoring the scope’s trajectory compensation to virtually any cartridge. The
sophisticated technology is simple to use, too. Once the few easy steps of programming are completed, your info will
always be stored in the scope, even with a dead battery. A proprietary mounting system allows for the lowest possible
mounting. Go to berettausa.com to see the mounting system that works best for you. Imported.
200112B
.................................................................................................................................................$899
B. Beretta Gun Pod Unit
The Beretta Gun Pod is a revolutionary digital display
that mounts to the grip cap of your shotgun. It provides
a digital readout of the ambient air temperature, the
cartridge pressure of the round fired and the overall
number of rounds fired, making it perfect for the serious
shotgun shooter.
E8A119.............
...............................$215
C. Beretta Gel-tec
Cheek Protector
C.
Beretta Exclusive. Made
of the same shock-absorbing silicon gel as our popular
recoil pad, the Gel-tec Cheek Protector eliminates
bruised cheeks. The protector is easily moved from gun
to gun—hundreds of times—without losing its effectiveness. Clear in color so your stock shows through, it
works equally well on wood or synthetic stocks. Made
in Italy.
E00378 .............. Protector .12" thick ...................$29
E00489 .............. Protector .24" thick ...................$29
D. Balance Cap:
Three interchangeable weights constitute the Balance Cap. This system
allows the shooter to achieve the perfect balance. A resistant anodized finish
on the Balance Cap allows the shooter
to compete anytime, anywhere. Fits all
Beretta A400 stocks.
D.D.
B.
Item
Type
Color Wt.
C8A799
Light
Blue
C5E586
Medium Black
3.9 oz $35
C5E587
Heavy
6.3 oz $38
Silver
Price
1.4 oz $58
E. Beretta Universal Cleaning Kit
(Rifles, Pistols & Shotguns)
A complete rifle, pistol and shotgun cleaning set in a well-organized, durable synthetic carry case with heavy-duty latches. Everything you need
to clean all your firearms, including brass bore brushes, mops, cleaning
patches and three 6-piece brass cleaning rods to handle the full range
from .17 caliber to 12 gauge. Dimensions: 9”x12”x1.5”. Made in Italy.
• 6 Brass Rods
• 9 Bore Brushes
• 9 Cotton Mops
• 2 Rag Pullers
• Patches
See all of our cleaning kits:
ST01CR ...............$64
4
berettausa.com/guncare
E.
17
C a l l
1 . 8 0 0 . 9 2 9 . 2 9 0 1
C a l l
CHOKE TUBES
A. Beretta Choke Tubes OptimaChoke HP
Designed specifically to fit the newest generation of Beretta firearms, our
OptimaChoke® HP tubes stand up to the heat of competition. Manufactured
from high- strength steel and finished in a nickel-alloy coating, these chokes guarantee significant corrosion resistance and have the ability to withstand the rigors
of steel shot. OptimaChoke® HP tubes are fully interchangeable on all Beretta
barrels that are threaded for Optima-Choke® HP. Visit berettausa.com for
a detailed chart on which choke tube fits your Beretta firearm. Made in Italy.
12 GAUGE FLUSH
Correct band to green
12 GAUGE 3/4“ EXTENDED
Competition
with color coded aluminum band
12 GAUGE 3/4“ EXTENDED
Competition
12 GAUGE 2” EXTENDED
Hunting (Not for Over & Unders)
20 GAUGE FLUSH
More Chokes
can be found at:
berettausa.com/chokes
WARNING: Use of the Optima HP choke
tube in an Optima firearm (without the
HP designation) can cause severe damage
to the choke tube and barrel when the
shotgun is fired. Only use Optima HP
choke tubes in these Optima HP shotguns:
SV10 Perennia, SV10 Prevail, A400 Xplor
and UGB25 Sporting.
CODE
12 GAUGE FLUSH
PRICE
C62070
C62071
C62072
C62073
C62074
F (Full)
IM (Improved Modified)
M (Modified)
IC (Improved Cylinder)
C (Cylinder)
$54
CODE
12 GAUGE 3/4“ EXTENDED PRICE
C62139
C62140
C62141
C62142
C62143
C62144
F (Full) gray
IM (Improved Modified) black
M (Modified) green
IC (Improved Cylinder) yellow
CL (Cylinder) blue
SK (Skeet) pink
CODE
12 GAUGE 3/4“ EXTENDED PRICE
C62178
C62179
C62180
C62181
C62182
F (Full)
IM (Improved Modified)
M (Modified)
IC (Improved Cylinder)
CL (Cylinder)
C62183
SKEU (European Skeet)
CODE
12 GAUGE 2” EXTENDED
PRICE
C62263
C62264
C62265
C62273
C62274
C62269
F (Full)
IM (Improved Modified)
M (Modified)
IC (Improved Cylinder)
CL (Cylinder)
EF (Extra Full)
$65
CODE
20 GAUGE FLUSH
PRICE
C61848
C61849
C61850
C61851
C61852
F (Full)
IM (Improved Modified)
M (Modified)
IC (Improved Cylinder)
C (Cylinder)
$54
$70
$60
B. TX4 Stand Off Device
Optima HP Choke Tube CL
B.
18
Six Point Hex Breacher made from 6061 Mil Spec Aircraft
Aluminum for light weight. This unit was designed for its
radical look. It is a full functioning muzzle brake / recoil
reducer, but do not let the looks fool you, it is still a functional breacher for occasional use.
JCTAC1 .............................................................. $159
w w w . b e r e t t a u s a . c o m
www.berettausa.com
CHOKE TUBES & MORE
A. Beretta Mobilchoke Choke Tubes
B. MICRO-CORE Field Recoil Pad
The Beretta Mobilchoke tubes offer you the same
choke system as the latest Beretta US-made semiauto shotgun, the A300 Outlander. These choke
tubes are original Beretta factory replacements
for shotguns that feature the Mobilchoke
system.
Beretta Mobilchoke tubes are
available in two versions:
• Flush—for 12, 20 and
A.
28 gauge
• Extended—adding 25mm and
50mm for 12 gauge (available online).
These choke tubes are treated against corrosion;
they are designed to resist stress and to offer maximum
durability. See Chart Below..........................................$30
SOFT, LIGHT AND FITTABLE! A further
step forward in performance. Soft, light and
able to slide during shouldering. MICROCORE is an innovative recoil pad developed
by Beretta thanks to its experiance matured
over decades on competition fields around
the world. MICRO-CORE expands gradually
and instantly, increasing its surface area on the
shoulder and giving the shotgun secure and
precise support.
E7300 ................................................ $45
Note: for use only in shotguns
that feature the Mobilchoke
system.
Code
JCTUBE13
JCTUBE14
JCTUBE15
JCTUBE16
JCTUBE18
Code
JCTUBE21
JCTUBE22
JCTUBE23
JCTUBE24
JCTUBE28
JCTUBE27
Code
Gauge
12
12
12
12
12
Gauge
20
20
20
20
20
20
Gauge
Constriction
F
IM
M
IC
CL
Constriction
F
IM
M
IC
CL
SK
Constriction
Type
Flush
Flush
Flush
Flush
Flush
Type
Flush
Flush
Flush
Flush
Flush
Flush
B.
Code
Application
Thickness
E73004
Field
.79"
E73005
Field
.59"
E73006
Field
.39"
E73021
Skeet/Sporting
.51"
E73022
Skeet/Sporting
.91"
E73023
Skeet/Sporting
.71"
Type
JCTUBE43
.410
F
Flush
JCTUBE44
.410
IM
Flush
JCTUBE45
.410
M
Flush
JCTUBE46
.410
IC
Flush
E73024
Trap
.51"
JCTUBE48
JCTUBE47
.410
.410
CL
SK EU
Flush
Flush
E73025
Trap
.71"
E73026
Trap
.91"
Code
JCTUBE33
JCTUBE34
JCTUBE35
JCTUBE36
JCTUBE38
JCTUBE37
Gauge
28
28
28
28
28
28
Constriction
F
IM
M
IC
CL
SK
Type
Flush
Flush
Flush
Flush
Flush
Flush
More Recoil Pads
can be found at:
berettausa.com/recoil
19
800.929.2901 www.berettausa.com
Find Beretta on:
PRSRT STD
US POSTAGE
PAID
Beretta Catalog Dept.
17601 Beretta Drive,
Accokeek, MD 20607
BERETTA USA CORP.
Customer Source Code
A. Beretta 92 Techno
Pistol Case for Storage,
Display or Transport
A.
This is the most advanced
gun case on the market today,
with its rugged milled aluminum frame to its ¼” thick
acrylic display panels, and it’s
dual-sided inbuilt keylocks.You
can feel safe about the security of your Beretta 92. This is
a handgun case with a difference, featuring a see-through
structure and inbuilt keylock that lets handguns be securely stored and displayed. The leading edge of gun storage, this multifunctional model
features a plexiglas cutout custom fit to the 92, a dummy mag mount, and a cutout for the magazine. The dummy mag,
due to its precise design will not damage the pistol in any way. The dummy mag can also be locked in place so that the
handgun can be displayed both horizontally and vertically. 13.2"H x 11"L x 3 "D. Weight is 7 lbs. Made in Italy.
TFGSB-92-BER..............$350
Prices may be lower at berettausa.com
B. Pistol Vault
Our heavy-gauge steel vault
will keep one or
two of your pistols
safe and secure from
everyone but you.
Deep foam padding
fully protects your
firearms. Five-button
Simplex lock opens
in seconds for fast
access when you
need it. Change the
combination as often
as you want. Holes
on bottom for secure attachment. Small vault comes with
a locking cable that can run
through the bottom holes for
quick security. Made in USA.
LB1000...Large
12½" X 8¼" X 3".......$200
LB2000...Small
9½" X 7¼"X 2¼" .......$175
B.