Wall Fixtures - Boyd Lighting
Transcription
Wall Fixtures - Boyd Lighting
t able o f c on t e n t s 2 0 1 1 /2 0 12 Wall Fixtures Astoria (k-0162) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Lavaliere (k-0091, k-0092). . . . . . . . . . . . . . . . . . . . . . . 6 Montgolfier (k-0004). . . . . . . . . . . . . . . . . . . . . . . . . . . 1 On The Rocks (k-0200). . . . . . . . . . . . . . . . . . . . . . . . 13 Pop! (k-0149). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Primitive (k-0024). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Shimmer (k-0183). . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Ceiling Fixtures Astoria (k-0169, k-0170). . . . . . . . . . . . . . . . . . . . . 11-12 Lavaliere (k-0093 - k-0095). . . . . . . . . . . . . . . . . . . . 7-8 Oriana (k-0110, k-0116, k-0117). . . . . . . . . . . . . . . 9-10 Soleil (k-0057 - k-0059) . . . . . . . . . . . . . . . . . . . . . . 4-5 Pendants Lavaliere (k-0098, k-0099). . . . . . . . . . . . . . . . . . . . . 8-9 Montgolfier (k-0005, k-0006) . . . . . . . . . . . . . . . . . . 1-2 Shimmer (k-0187). . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Soleil (k-0052 - k-0055) . . . . . . . . . . . . . . . . . . . . . . 3-4 Table Lamps Angkor (k-0085). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chenla (k-0083) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Kambuja (k-0084). . . . . . . . . . . . . . . . . . . . . . . . . . . . . Montgolfier (k-0001, k-0002) . . . . . . . . . . . . . . . . . . . . Primitive (k-0021 - k-0023). . . . . . . . . . . . . . . . . . . . . . Soleil (k-0050) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 5 5 1 2 3 Floor Lamps Soleil (k-0051) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Cascade Luminaire® Luminaire (k-0031 - k-0133). . . . . . . . . . . . . . . . . . Luminaire Divide (k-0060, k-0061, k-0063). . . . . . . Luminaire Round (k-0034, k-0134 - k-0136). . . . . . Wall Bracket (k-0035, k-0036). . . . . . . . . . . . . . . . . 14-15 18-19 15-17 17-18 Other Finish Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Lamping Identifier. . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 List of representatives. . . . . . . . . . . . . . . . . . . . . . . . 21-23 Terms & Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . 24 © 2011 The Kentfield Collection®, a division of Boyd Lighting 07867_KC-SpecTXT_r3_CS5.indd 1 1/11/11 6:01 PM Required information for all fixture orders Product Number / Name k-0001 Montgolfier Grand Table Lamp 19" 1 Product Information Height 37K" 949 mm Width 19" 483 mm Lamping, Lamp Type Base 7¾" dia 197 mm Net Wt. 22 lbs 10 kg Shade: 17" x 19" x 15½" H; 432 x 483 x 394 mm • Incandescent Medium base Two, three-way, A-21, 100w max each Other Information: UL listed (or equivalent) with zip cord only Shade: opaque white linen Top diffuser: frosted Pyrex glass Two, three-way sockets “S” arm body cluster with rock crystal pulls Saddle leather pad with yearly edition 37K" 2 Other Requirements Glass: • Venetian Opalino (Anis) • Venetian Crystal with bubbles (Balloton) 3 Finish • WG/BB • YG/RB • WPM Cord: • Zip • Rayon Designed by Fisher Weisman Patent Design: D 505,745 S Optional: • Bolt-down 7¾" k-0002 Montgolfier Occasional Table Lamp 15" Height 29" 737 mm Width 15" 381 mm Base 5¾" dia 146 mm Net Wt. 11 lbs 5 kg Shade: 14" x 15" x 12" H; 356 x 381 x 305 mm • Incandescent Medium base One, three-way, A-21, 100w max Other Information: UL listed (or equivalent) with zip cord only Shade: opaque white linen Top diffuser: frosted Pyrex glass Turned brass three-way socket Saddle leather pad with yearly edition 29" Optional: • Bolt-down 5¾" Montgolfier Wall Sconce 7¾" Height 20½" 521 mm Width 7¾" 197 mm Projection 4" 102 mm Net Wt. 10 lbs 4.5 kg • Incandescent Medium base Two, T-10, 60w max each Glass: • Venetian Opalino (Anis) • Venetian Crystal with bubbles (Balloton) • WG/BB • YG/RB • WPM • Incandescent Medium base One, A-21 or T-10, Clear, 60w max Height Overall: • 24" 610 mm • 30" 762 mm • 36" 914 mm • 42" 1067 mm • WG/BB • YG/RB • WPM Center of outlet box to top of fixture: 10¼"; 260 mm ADA compliant at any mounting height Other Information: UL listed (or equivalent) for damp locations Top and bottom diffusers: woven metal mesh Dual porcelain sockets Horizontal or vertical mounting Engraved plate with yearly edition 20½" • WG/BB • YG/RB • WPM Cord: • Zip • Rayon Designed by Fisher Weisman Patent Design: D 505,745 S k-0004 Glass: • Venetian Opalino (Anis) • Venetian Crystal with bubbles (Balloton) Designed by Fisher Weisman Patent Design: D 505,745 S k-0005 Montgolfier Pendant Large 7¾" Height Specify Width 7¾" 197 mm Cage Height 20¼" 514 mm Net Wt. 22 lbs 10 kg Canopy: 7M" dia x 1" H; 200 x 25 mm 20G" Other Information: UL listed (or equivalent) for damp locations Porcelain socket Engraved plate with yearly edition Designed by Fisher Weisman Patent Design: D 505,745 S Glass: • Venetian Opalino (Anis) • Venetian Crystal with bubbles (Balloton) 1 07867_KC-SpecTXT_r1_CS5.indd 2 1/6/11 9:07 PM Required information for all fixture orders Product Number / Name k-0006 Montgolfier Pendant Small 5¾" 1 Product Information Height Specify Width 5¾" 146 mm Lamping, Lamp Type Cage Height 15M" 403 mm Net Wt. 8 lbs 3.6 kg • Incandescent Medium base One, A-21 or T-10, Clear, 60w max Canopy: 5¾" dia x L" H; 143 x 16 mm Other Information: UL listed (or equivalent) for damp locations Porcelain socket Engraved plate with yearly edition k-0021 Primitive Grand Table Lamp 18" Height 31K" 797 mm Width 18" 457 mm Base 8" dia 203 mm Net Wt. 27 lbs 12.2 kg • Incandescent Medium base One, three-way, A-21, 150w max Shade: 16" x 18" x 14" H; 406 x 457 x 356 mm • WG/BB • YG/RB • WPM Cord: • Brown Zip • Brown Rayon Optional: • Bolt-down Other Information: UL listed (or equivalent) with zip cord only Hand finished cold cast bronze Shade: translucent beige linen Top diffuser: frosted Pyrex glass Turned brass three-way socket Saddle leather pad with yearly edition 31K" Height Overall: • 24" 610 mm • 30" 762 mm • 36" 914 mm • 42"1067 mm 3 Finish Glass: • Venetian Opalino (Anis) • Venetian Crystal with bubbles (Balloton) Designed by Fisher Weisman Patent Design: D 505,745 S 15⅞" 2 Other Requirements Designed by Clodagh 8" k-0022 Primitive Occasional Table Lamp 15" Height 27" 686 mm Width 15" 381 mm Base 4½" dia 114 mm Net Wt. 12 lbs 5.4 kg • Incandescent Medium base One, three-way, A-21, 150w max Shade: 14" x 15" x 12" H; 356 x 381 x 305 mm Optional: • Bolt-down Other Information: UL listed (or equivalent) with zip cord only Hand finished cold cast bronze Shade: translucent beige linen Top diffuser: frosted Pyrex glass Turned brass three-way socket Saddle leather pad with yearly edition 27" Cord: • Brown Zip • Brown Rayon Designed by Clodagh 4½" k-0023 Primitive Petite Table Lamp 10" Height 25" 635 mm Width 10" 254 mm Base 4K" dia 111 mm Net Wt. 12 lbs 5.4 kg • Incandescent Candelabra base One, B-10, 60w max Optional: • Bolt-down Shade: 9" x 10" x 8" H; 229 x 254 x 203 mm Other Information: UL listed (or equivalent) Hand finished cold cast bronze Shade: translucent beige linen Brown zip cord with on/off switch Saddle leather pad with yearly edition 25" Designed by Clodagh 4K" 2 07867_KC-SpecTXT_r1_CS5.indd 3 1/6/11 9:07 PM Required information for all fixture orders Product Number / Name k-0024 Primitive Wall Sconce 7I" 1 Product Information Height 19¼" 489 mm Width 7¾" 197 mm Lamping, Lamp Type Projection 4" 102 mm Net Wt. 10 lbs 4.5 kg 2 Other Requirements 3 Finish • Incandescent Candelabra base Three B-10, 40w max each Center of outlet box to top of fixture: 12¾"; 324 mm ADA compliant at any height Other Information: UL listed (or equivalent) for damp locations Hand finished cold cast bronze Diffuser: etched white opal glass Porcelain sockets Engraved plate with yearly edition 19¼" Designed by Clodagh k-0050 Soleil Table Lamp 10L" Height 28K" 721 mm Width 10L" 270 mm Base 6" square 152 mm Net Wt. 11 lbs 5 kg • Incandescent Medium base One, three-way, A-21, 100w max Square shade: 9” x 10” x 7½” H; 229 x 254 x 191 mm 28K" Cord: • Zip • Rayon Optional: • Bolt-down • A/CP • P/CP • P/N • S/CP • S/N Other Information: UL listed (or equivalent) with zip cord only Shade: white rayon/acetate blend with 2½" internal opaque banding Turned brass three-way socket Saddle leather pad with yearly edition 6" The Soleil Collection© Designed by Jiun Ho k-0051 Soleil Floor Lamp 14L" Height 59L" 1514 mm Width 14L" 371 mm Base 9" square 229 mm Net Wt. 17 lbs 7.7 kg • Incandescent Medium base Two, three-way, A-21, 100w max each • Incandescent Candelabra base Eight, G-16½ or B-10, white, 60w max each • A/CP • P/CP • P/N • S/CP • S/N Square shade: 13” x 14” x 12” H; 330 x 356 x 305 mm Other Information: UL listed (or equivalent) with zip cord only Shade: white rayon/acetate blend with 2½" internal opaque banding Two, three-way, pull-chain brass sockets “S” arm body cluster with metal pulls Saddle leather pad with yearly edition 59L" The Soleil Collection© Designed by Jiun Ho 9" k-0052 Soleil Salon Pendant 6" Overall Height Specify Shade Height 9I" 241 mm Diameter 24M" 632 mm Net Wt. 18 lbs 8.2 kg Round shade: 23” x 24” x 9¾” H; 584 x 610 x 241 mm Canopy: 6” dia x 1K” H; 152 x 35 mm 9I" 24M" Height Overall: • 24" 610 mm • 30" 762 mm • 36" 914 mm • 42" 1067 mm • 48" 1219 mm • A/CP • P/CP • P/N • S/CP • S/N Other Information: UL listed (or equivalent) for damp locations Shade: white rayon/acetate blend with 2½" external opaque banding Engraved plate with yearly edition The Soleil Collection© Designed by Jiun Ho 3 07867_KC-SpecTXT_r1_CS5.indd 4 1/6/11 9:07 PM Required information for all fixture orders Product Number / Name k-0053 Soleil Petite Pendant 6" 1 Product Information Overall Height Specify Shade Height 14I" 375 mm Lamping, Lamp Type Diameter 11M" 302 mm Net Wt. 11 lbs 5 kg • 3 Finish Incandescent Candelabra base Four, B-10, white, 60w max each Height Overall: • 24" 610 mm • 30" 762 mm • 36" 914 mm • 42" 1067 mm • 48" 1219 mm • A/CP • P/CP • P/N • S/CP • S/N • Incandescent Candelabra base Four, B-10, white 60w max each Height Overall: • 30" 762 mm • 36" 914 mm • 42" 1067 mm • 48" 1219 mm • A/CP • P/CP • P/N • S/CP • S/N • Incandescent Medium base Two, A-19, 100w max each Height Overall: • 24" 610 mm • 30" 762 mm • 36" 914 mm • 42" 1067 mm • 48" 1219 mm Single Finish: • A/CP • S/CP • S/N Cylindrical shade: 10” x 11” x 14¾” H; 254 x 279 x 375 mm Canopy: 6” dia x 1K” H; 152 x 35 mm 14I" 2 Other Requirements Other Information: UL listed (or equivalent) for damp locations Shade: white rayon/acetate blend with 2½" external opaque banding Engraved plate with yearly edition 11M" The Soleil Collection© Designed by Jiun Ho k-0054 Soleil Lantern Pendant 6" Overall Height Specify Cage Height 20L" 524 mm Diameter 12" 305 mm Net Wt. 15 lbs 6.8 kg Cylindrical shade: 9” x 9” x 12” H; 229 x 229 x 305 mm Canopy: 6” dia x 1K” H; 152 x 35 mm 20L" Other Information: UL listed (or equivalent) for damp locations Shade: white rayon/acetate blend with 2½" external opaque banding Engraved plate with yearly edition 12" The Soleil Collection© Designed by Jiun Ho k-0055 Soleil Demi-Grand Pendant 6" Height Specify Width 10L" 270 mm Length 41L" 1060 mm Net Wt. 19 lbs 8.6 kg Square shades: 9” x 10” x 7½” H; 229 x 254 x 191 mm Canopy: 6” square x 1K” H; 152 x 35 mm 7H" 41L " Combo Finish: • P/CP & S/CP • P/N & S/N Other Information: UL listed (or equivalent) for damp locations Shades: white rayon/acetate blend with 2½" internal opaque banding Engraved plate with yearly edition The Soleil Collection© Designed by Jiun Ho k-0057 Soleil Ceiling Small 6L" Height 8" 203 mm Diameter 6L" 168 mm Net Wt. 3 lbs 1.4 kg Shade: 6” H x 3½” dia; 152 x 89 mm 8" • Incandescent Candelabra base One, B-10, 60w max • A/CP • P/CP • P/N • S/CP • S/N Other Information: UL listed (or equivalent) for damp locations Shade: white cased glass with 1G" top banding Bottom diffuser: white acrylic Engraved plate with yearly edition The Soleil Collection© Designed by Jiun Ho 4 07867_KC-SpecTXT_r1_CS5.indd 5 1/6/11 9:07 PM Required information for all fixture orders Product Number / Name k-0058 Soleil Ceiling Medium 10K" 1 Product Information Lamping, Lamp Type Height Diameter 11½" 10K" 292 mm 264 mm Shade: 8¾” H x 6” dia; 222 x 152 mm Net Wt. 7.5 lbs 3.4 kg 2 Other Requirements • Incandescent Medium base One, A-19, 60w max • A/CP • P/CP • P/N • S/CP • S/N • Incandescent Medium base Three, A-19, 60w max each • A/CP • P/CP • P/N • S/CP • S/N Other Information: UL listed (or equivalent) for damp locations Shade: white cased glass with 1G" top banding Bottom diffuser: white acrylic Engraved plate with yearly edition 11½" 3 Finish The Soleil Collection© Designed by Jiun Ho k-0059 Soleil Ceiling Large 18" Height 8½" 216 mm Diameter 18" 457 mm Net Wt. 15 lbs 6.8 kg Shade: 6” H x 13½” dia; 152 x 343 mm Other Information: UL listed (or equivalent) for damp locations Shade: white rayon/acetate blend with 1G" external top banding Bottom diffuser: white acrylic Engraved plate with yearly edition 8½" The Soleil Collection© Designed by Jiun Ho k-0083 Chenla Table Lamp 19" Height 38H" 978 mm Width 19" 483 mm Base 7I" dia 197 mm Net Wt. 10 lbs 4.5 kg Shade: 17” x 19” x 15½” H; 432 x 483 x 394 mm • Incandescent Medium base Two, three-way, A-21, 100w max each Cord: • Zip • Rayon • AB/B • P/B • P/N • S/N • Incandescent Medium base Two, three-way, A-21, 100w max each Cord: • Zip • Rayon • AB/B • P/B • P/N • S/N Other Information: UL listed (or equivalent) with zip cord only Base: cased white glass Shade: opaque white linen Top diffuser: frosted Pyrex glass Two, three-way, pull-chain brass sockets “S” arm body cluster with metal pulls Engraved plate with yearly edition 38½" Bolt-down option not available Designed by Jiun Ho Patent Pending 7¾" k-0084 Kambuja Table Lamp 19" Height 38H" 978 mm Width 19" 483 mm Base Net Wt. 7G" octagonal 10 lbs 184 mm 4.5 kg Shade: 17” x 19” x 15½” H; 432 x 483 x 394 mm Other Information: UL listed (or equivalent) with zip cord only Base: cased white glass Shade: opaque white linen Top diffuser: frosted Pyrex glass Two, three-way, pull-chain brass sockets “S” arm body cluster with metal pulls Engraved plate with yearly edition 38½" Bolt-down option not available 7¼" Designed by Jiun Ho Patent Pending 5 07867_KC-SpecTXT_r1_CS5.indd 6 1/6/11 9:07 PM Required information for all fixture orders Product Number / Name k-0085 Angkor Table Lamp 19" 1 Product Information Height 38H" 978 mm Width 19" 483 mm Lamping, Lamp Type Base 7I" square 197 mm Net Wt. 10 lbs 4.5 kg Shade: 17” x 19” x 15½” H; 432 x 483 x 394 mm 2 Other Requirements 3 Finish • Incandescent Medium base Two, three-way, A-21, 100w max each Cord: • Zip • Rayon • AB/B • P/B • P/N • S/N • Halogen Bi-pin base Top plate: One, mrc-16, 35w max HAL Voltage: • AB/B • S/B • S/N Other Information: UL listed (or equivalent) with zip cord only Base: cased white glass Shade: opaque white linen Top diffuser: frosted Pyrex glass Two, three-way, pull-chain brass sockets, “S” arm body cluster with metal pulls Engraved plate with yearly edition 38½" Bolt-down option not available Designed by Jiun Ho Patent Pending 7¾" k-0091 Lavaliere I Wall Bracket 8¼" Height 19" 483 mm Width 8¼" 210 mm Projection 7¾" 197 mm Net Wt. 14 lbs 6.4 kg Center of outlet box to top of fixture: 6½"; 165 mm For ADA compliance, height of center of outlet box above finished floor: 86½"; 2197 mm 7¾" Other Information: UL listed (or equivalent) for damp locations Hammertone brass crown Mirrored accent wall plate Engraved plate with yearly edition • 120 • 277 Suspended downlight: One, mrc-8, 20w max 12 volt integral transformers Beads: combination of semi-precious stones, Venetian and crystal beads in varying sizes. Bead selection subject to change due to market availability. 19" Fixture must be properly supported due to weight. Designed by Thomas Fuchs Patent Design: D591,897 k-0092 Lavaliere II Wall Bracket 15½" 7¾" Height 19" 483 mm Width 15½" 394 mm Projection 7¾" 197 mm Net Wt. 20 lbs 9.1 kg Center of outlet box to top of fixture: 6½"; 165 mm For ADA compliance, height of center of outlet box above finished floor: 86½"; 2197 mm Other Information: UL listed (or equivalent) for damp locations Hammertone brass crown Mirrored accent wall plate Engraved plate with yearly edition 19" • Halogen Bi-pin base Top plate: Two, mrc-16, 35w max each HAL Voltage: • 120 • 277 • AB/B • S/B • S/N Suspended downlight: One, mrc-8, 20w max 12 volt integral transformers Beads: combination of semi-precious stones, Venetian and crystal beads in varying sizes. Bead selection subject to change due to market availability. Fixture must be properly supported due to weight. Designed by Thomas Fuchs Patent Design: D591,897 6 07867_KC-SpecTXT_r1_CS5.indd 7 1/6/11 9:07 PM Required information for all fixture orders Product Number / Name k-0093 Lavaliere Luminaire Salon 15½" 1 Product Information Height 18" 457 mm Diameter 15½" 394 mm Lamping, Lamp Type Net Wt. 50 lbs 22.7 kg Other Information: UL listed (or equivalent) for damp locations Canopy: brass with hammertone detail Engraved plate with yearly edition • Halogen Bi-pin base Four, mrc-16, 50w max each, 12 volt integral transformers 2 Other Requirements HAL Voltage: • 120 • 277 3 Finish • AB/B • S/B • S/N 36˚ flood lamps with opaque silver reflectors recommended Beads: combination of semi-precious stones, Venetian and crystal beads in varying sizes. Bead selection subject to change due to market availablity. 18" Fixture must be properly supported due to weight. Please consult your local electrician. Designed by Thomas Fuchs Patent Design: D591,897 k-0094 Lavaliere Luminaire Grand 18¾" Height 27" 686 mm Diameter 18¾" 476 mm Net Wt. 65 lbs 29.5 kg Other Information: UL listed (or equivalent) for damp locations Canopy: brass with hammertone detail Engraved plate with yearly edition 27" • Halogen Bi-pin base Four, mrc-16, 50w max each, 12 volt integral transformers HAL Voltage: • 120 • 277 • AB/B • S/B • S/N 36˚ flood lamps with opaque silver reflectors recommended Beads: combination of semi-precious stones, Venetian and crystal beads in varying sizes. Bead selection subject to change due to market availablity. Fixture must be properly supported due to weight. Please consult your local electrician. Designed by Thomas Fuchs Patent Design: D591,897 7 07867_KC-SpecTXT_r1_CS5.indd 8 1/6/11 9:07 PM Required information for all fixture orders Product Number / Name k-0095 Lavaliere Luminaire 30" 30" 1 Product Information Height 38" 965 mm Lamping, Lamp Type Diameter 30" 762 mm Net Wt. 200 lbs 90.9 kg Other Information: UL listed (or equivalent) for damp locations Brass hammertone detail Engraved plate with yearly edition 38" • Halogen Bi-pin base Nine, mrc-16, 50w max each, 12 volt integral transformers 2 Other Requirements HAL Voltage: • 120 • 277 3 Finish • AB/B • S/B • S/N 36˚ flood lamp with opaque silver reflector recommended. Beads: combination of semi-precious stones, Venetian and crystal beads in varying sizes. Bead selection subject to change due to market availability. Fixture must be properly supported due to weight. Designed by Thomas Fuchs Patent Design: D591,897 k-0098 Lavaliere Pendant Salon 5" Height Specify Diameter 15H" 394 mm Fixture Height Net Wt. 25¼" 75 lbs 641 mm 34.1 kg Canopy: 5" dia x 1" H; 127 x 25 mm Other Information: UL listed (or equivalent) for damp locations Brass hammertone details Engraved plate with yearly edition • Halogen Bi-pin base Four, mrc-16, 50w max each and Three, mrc-8, 20w max each, 12 volt integral transformers Height Overall: • 36" 914 mm • 42" 1067 mm • 48" 1219 mm • 54" 1372 mm • AB/B • S/B • S/N HAL Voltage: 36˚ flood lamp with opaque silver reflector recommended. • 120 • 277 Beads: combination of semi-precious stones, Venetian and crystal beads in varying sizes. Bead selection subject to change due to market availability. 25¼" Fixture must be properly supported due to weight. Designed by Thomas Fuchs Patent Design: D591,897 15H" 8 07867_KC-SpecTXT_r1_CS5.indd 9 1/6/11 9:07 PM Required information for all fixture orders Product Number / Name k-0099 Lavalaiere Pendant Grand 5" 1 Product Information Height Specify Diameter 18I" 476 mm Lamping, Lamp Type Fixture Height Net Wt. 34¼" 100 lbs 870 mm 45.5 kg Canopy: 5" dia x 1" H; 127 x 25 mm Other Information: UL listed (or equivalent) for damp locations Brass hammertone details Engraved plate with yearly edition • Halogen Bi-pin base Four, mrc-16, 50w max each and Three, mrc-8, 20w max each 12 volt integral transformers 2 Other Requirements 3 Finish Height Overall: • AB/B • 42" 1067 mm • S/B • 48" 1219 mm • S/N • 54" 1372 mm • 60" 1524 mm HAL Voltage: 36˚ flood lamp with opaque silver reflector recommended. • 120 • 277 • Height Overall Combo Starts at: Finish: • 26" 660 mm • P/B & P/N Increases in 12” increments Single Finish: HAL Voltage: • P/N • 120 • 277 Beads: combination of semi-precious stones, Venetian and crystal beads in varying sizes. Bead selection subject to change due to market availability. Fixture must be properly supported due to weight. 34¼" Designed by Thomas Fuchs Patent Design: D591,897 18I" k-0110 Oriana Luminaire 17¾" Height Specify Width 13M" 352 mm Length 17¾" 451 mm Net Wt. 34 lbs 15.4 kg Beads: ½" dia (13 mm); Spheres: 1" dia (25 mm) Other Information: UL listed (or equivalent) for damp locations Beads: STRASS® Swarovski® Crystal Spheres/rods: polished nickel Twists: polished brass or polished nickel Plate: polished aluminum with perforated black mesh Engraved plate with yearly edition Halogen Bi-pin base Three, mrc-16, 35w max each, 12 volt integral transformers Two 36˚ flood lamps with opaque silver reflectors, one 36˚ narrow lamp. Designed by Todd Rugee Design Patent: D592,801 S; D605,810 Patent Utility: 6,863,423 B2 Swarovski® and STRASS® are registered trademarks of Swarovski AG. 13M" 9 07867_KC-SpecTXT_r2_CS5.indd 10 1/11/11 9:26 AM Required information for all fixture orders Product Number / Name k-0116 Oriana Luminaire Divide 12” 12" 1 Product Information Height Specify Width 4½" 114 mm Lamping, Lamp Type Length 12" 305 mm Net Wt. 18 lbs 8.2 kg Beads: ½" dia (13 mm); Spheres: 1" dia (25 mm) • Halogen Bi-pin base Two, mrc-11 or mrc-8, 35w max each, 36˚ narrow lamps 12 volt integral transformers Other Information: UL listed (or equivalent) for damp locations Beads: STRASS® Swarovski® Crystal Spheres/rods: polished nickel Twists: polished brass or polished nickel Plate: polished aluminum with perforated black mesh Engraved plate with yearly edition 2 Other Requirements Height Overall Starts at: • 48" 1219 mm Increases in 12” increments HAL Voltage: 3 Finish Combo Finish: • P/B & P/N Single Finish: • P/N • 120 • 277 Designed by Todd Rugee Design Patent: D592,801 S,D604,886 Patent Utility: 6,863,423 B2; 7,220,027 B2 4H" Swarovski® and STRASS® are registered trademarks of Swarovski AG. k-0117 Oriana Luminaire Divide 24” 24" Height Specify Width 4½" 114 mm Length 24" 610 mm Net Wt. 36 lbs 16.3 kg Beads: ½" dia (13 mm); Spheres: 1" dia (25 mm) • Halogen Bi-pin base Four, mrc-11 or mrc-8, 35w max each, 36˚ narrow lamps 12 volt integral transformers Other Information: UL listed (or equivalent) for damp locations Beads: STRASS® Swarovski® Crystal Spheres/rods: polished nickel Twists: polished brass or polished nickel Plate: polished aluminum with perforated black mesh Engraved plate with yearly edition Height Overall Starts at: • 48" 1219 mm Increases in 12” increments HAL Voltage: Combo Finish: • P/B & P/N Single Finish: • P/N • 120 • 277 Fixture must be properly supported at both ends. Designed by Todd Rugee Design Patent: D592,801 S; D604,886 Patent Utility: 6,863,423 B2; 7,220,027 B2 4H" Swarovski® and STRASS® are registered trademarks of Swarovski AG. k-0149 Pop! Wall Sconce 15" 10" Height 33" 838 mm Width 15" 381 mm Projection 10" 254 mm Net Wt. 10 lbs 4.5 kg Backplate: 5⅞" x 9"; 149 x 229 mm Center of outlet box to top of fixture: 16½"; 419 mm For ADA compliance, height of center of outlet box above finished floor: 96½"; 2451 mm Other Information: UL listed (or equivalent) for damp locations Gold leaf offered in 12 kt white gold or 22 kt yellow gold Engraved plate with yearly edition 33" 32 asymmetrically placed spheres mounted on stainless steel rods. Spheres: 1L" dia; 40 mm Rods: J" dia; 3 mm Up & down light provided by: HAL/LED Voltage: • Halogen Bi-pin base Two, mrc-16, 50w max each 12 volt integral transformers • 120 • 277 • LED Two, 8.4w each (16.8w total) 3100K color temperature (lamps provided with fixture) Upcharges will apply for LED remote dimming. Contact your local Kentfield rep with the specification of the dimming control system being used. Fixture: • WG • YG Sphere type: • Clear Crystal • WG/S (solid leaf) • WG/BR (broken leaf over clear) • YG/S (solid leaf) • YG/BR (broken leaf over clear) Vertical mounting preferred. Fixture can be mounted horizontally but please note that you may see into the light source. Designed by Fisher Weisman Patent Design: D612,535 10 07867_KC-SpecTXT_r2_CS5.indd 11 1/11/11 9:31 AM Required information for all fixture orders 1 Product Number / Name Product Information k-0162 Astoria ADA Wall Bracket 9" 4" Height 17¾" 451 mm Width 9" 229 mm Lamping, Lamp Type Projection 4" 102 mm Net Wt. 8 lbs 3.6 kg Center of outlet box to top of fixture: 2¼"; 57 mm ADA compliant at any mounting height Other Information: UL listed (or equivalent) for damp locations Polished aluminum crown with satin nickel mesh Mirrored accent wall plate Engraved plate with yearly edition 17¾" • Halogen Bi-pin base Two, mrc-8, 20w max each 12 volt integral transformers 2 Other Requirements 3 Finish HAL Voltage: • 120 • 277 36˚ flood lamp with opaque silver reflector recommended. Polished aluminum plate pre-trimmed with fine crystal pendalogues and prisms on traditional chain with oval, round and faceted beads. Pendalogues and prisms come in a mixture of traditional shapes. All are made from hand-blown, handcut and hand-polished crystal. Cascade crystal strands may be used on Astoria luminaires and vice versa. Please contact your local Kentfield representative for details. Designed by Todd Rugee Patent Utility: 6,863,423 B2 k-0169 Astoria Grand Luminaire 31" 12" 18" Height 12" 305 mm Width 18" 457 mm Length 31" 787 mm Net Wt. 67 lbs 30.4 kg Other Information: UL listed (or equivalent) for damp locations Satin aluminum oval ceiling plate with satin nickel mesh. Engraved plate with yearly edition • Halogen Bi-pin base Six, mrc-16, 50w max each 12 volt integral transformers HAL Voltage: • 120 • 277 36˚ flood lamp with opaque silver reflector recommended. Polished aluminum plates pre-trimmed with fine crystal pendalogues and prisms on traditional chain with oval, round and faceted beads. Pendalogues and prisms come in a mixture of traditional shapes. All are made from hand-blown, handcut and hand-polished crystal. Cascade crystal strands may be used on Astoria luminaires and vice versa. Please contact your local Kentfield representative for details. Fixture must be properly supported due to weight. Designed by Todd Rugee Patent Design: D521,176 Patent Utility: 6,863,423 B2 11 07867_KC-SpecTXT_r1_CS5.indd 12 1/6/11 9:07 PM Required information for all fixture orders 1 Product Number / Name Product Information k-0170 Astoria Salon Luminaire 24" Height 12" 305 mm Width 12" 305 mm Lamping, Lamp Type Length 24" 610 mm Net Wt. 38 lbs 17.3 kg Other Information: UL listed (or equivalent) for damp locations Satin aluminum oval ceiling plate with satin nickel mesh. Engraved plate with yearly edition 12" • Halogen Bi-pin base Three, mrc-16, 50w max each 12 volt integral transformers 2 Other Requirements 3 Finish HAL Voltage: • 120 • 277 36˚ flood lamp with opaque silver reflector recommended. Polished aluminum plates pre-trimmed with fine crystal pendalogues and prisms on traditional chain with oval, round and faceted beads. 12" Pendalogues and prisms come in a mixture of traditional shapes. All are made from hand-blown, handcut and hand-polished crystal. Cascade crystal strands may be used on Astoria luminaires and vice versa. Please contact your local Kentfield representative for details. Fixture must be properly supported due to weight. Designed by Todd Rugee Patent Design: D521,176 Patent Utility: 6,863,423 B2 k-0183 Shimmer Wall Bracket 5J" 3¼" Height 26¾" 679 mm Width 5J" 130 mm Projection 3¼" 83 mm Net Wt. 7 lbs 3.2 kg Center of outlet box to top of fixture: 2½"; 64 mm ADA compliant at any mounting height • Halogen Bi-pin base One, mrc-8, 20w max Narrow spot 12 volt integral transformer HAL Voltage: • 120 • 277 • P/N • S/N Other Information: UL listed (or equivalent) for damp locations Faceted crystals and crystal pearls by Swarovski® Mirrored accent wall plate Engraved plate with yearly edition Designed by Doyle Crosby Patent Design: D622,437 Swarovski® is a registered trademark of Swarovski AG. 26¾" 12 07867_KC-SpecTXT_r1_CS5.indd 13 1/6/11 9:07 PM Required information for all fixture orders 1 Product Number / Name k-0187 Product Information Shimmer Pendant 5½" Height Specify Lamping, Lamp Type Diameter 5½" 130 mm Net Wt. 5 lbs 2.3 kg Canopy: 5½" dia x 4" H; 140 x 102 mm • Halogen Bi-pin base One, mrc-8, 35w max Narrow spot 12 volt integral transformer 2 Other Requirements Height Overall: • 30" 7 62 mm • 36" 914 mm • 42" 1067 mm 3 Finish • P/N • S/N HAL Voltage: Other Information: UL listed (or equivalent) for damp locations Faceted crystals and crystal pearls by Swarovski® Engraved plate with yearly edition • 120 • 277 Bead strands are fixed at 22" length, the stem is lengthened to specified HOA. Designed by Doyle Crosby Patent Design: D622,437 Swarovski® is a registered trademark of Swarovski AG. 22" k-0200 4¼" On The Rocks Sconce 4" Height 16¼" 413 mm Width 4¼" 108 mm Projection 4" 102 mm Net Wt. 5 lbs 2.3 kg Backplate: 4¼" square; 108 mm Center of outlet box to top of fixture: 14J"; 359 mm ADA compliant at any mounting height 16¼" • Halogen Bi-pin base One, mrc-16, 35w max 12 volt integral transformer HAL Voltage: • 120 • 277 • BK/BS • P/N Optional: • Mirror mount modification Other Information: UL listed (or equivalent) for damp locations Swarovski® clear crystal cubes in various sizes (4/6/8 mm) Engraved plate with yearly edition Optional mirror mount modification Mount as an uplight only Crystal holders are made from fine stainless steel wire (144 total). Not applicable to other finishes. Designed by Sherry Williamson Patent Pending Swarovski® is a registered trademark of Swarovski AG. 13 07867_KC-SpecTXT_r2_CS5.indd 14 1/11/11 9:37 AM C a sc a d e Lu m i na i r e Product Number / Name k-0031 Cascade Grand Luminaire 48" Required information for all fixture orders ® 1 Product Information Height Specify Width 10" 254 mm Lamping, Lamp Type Length 48" 1219 mm Net Wt. 72-88 lbs 32.7-39.9 kg Crystal strands in variable lengths Beads: K” dia (10 mm); Spheres: 1L” dia (40 mm) Other Information: UL listed (or equivalent) for damp locations. Engraved plate with yearly edition • Halogen Five, mrc-16, 50w max each, 12 volt integral transformers Three 36˚ flood and two 13˚ spot lamps with opaque silver reflectors recommended. • 120 • 277 Fixture must be properly supported due to weight. 48" 3 Finish Sphere type: 100% coverage • Clear Crystal • Rock Crystal • Smoky Rock Crystal • Amethyst • Pale Blue • Pale Pink • Gloss Black 30% coverage • Rock Crystal Optional: • Smoky Rock • Pendant Crystal suspension • Amethyst system — • Pale Blue must specify • Pale Pink height overall • Gloss Black Color and veining of semi-precious stones will vary. Colored spheres may exhibit dye lot variations. Pendant suspension system Height Overall: • 26" 660 mm • 38" 965 mm • 50" 1270 mm • 72" 1829 mm • 96" 2438 mm • 120" 3048 mm HAL Voltage: Polished aluminum plates pre-trimmed with crystal strands, elliptical satin aluminum ceiling plate with satin nickel mesh. 10" 2 Other Requirements Ceilings with a 30˚ slope or less can be accomodated with suspension system. Designed by Todd Rugee Patent Utility: 6,863,423 B2. Patent Design: D482,815 S; D521,176 S; D533,299 S k-0032 Cascade Salon Luminaire 39½" Height Specify Width 9½" 241 mm Length 39½" 1003 mm Net Wt. 54-63 lbs 24.5-28.6 kg Crystal strands in variable lengths Beads: K” dia (10 mm); Spheres: 1L” dia (40 mm) Other Information: UL listed (or equivalent) for damp locations Engraved plate with yearly edition 9½" Pendant suspension system 39½" • Halogen Four, mrc-16, 50w max each, 12 volt integral transformers Two 36˚ flood and two 13˚ spot lamps with opaque silver reflectors recommended. Height Overall: • 26" 660 mm • 38" 965 mm • 50" 1270 mm • 72" 1829 mm • 96" 2438 mm • 120" 3048 mm HAL Voltage: Polished aluminum plates pre-trimmed with crystal strands, elliptical satin aluminum ceiling plate with satin nickel mesh. • 120 • 277 Color and veining of semi-precious stones will vary. Colored spheres may exhibit dye lot variations. Optional: • Pendant suspension system — must specify height overall Fixture must be properly supported due to weight. Ceilings with a 30˚ slope or less can be accomodated with suspension system. Sphere type: 100% coverage • Clear Crystal • Rock Crystal • Smoky Rock Crystal • Amethyst • Pale Blue • Pale Pink • Gloss Black 30% coverage • Rock Crystal • Smoky Rock Crystal • Amethyst • Pale Blue • Pale Pink • Gloss Black Designed by Todd Rugee Patent Utility: 6,863,423 B2. Patent Design: D482,815 S; D521,176 S; D533,299 S 14 07867_KC-SpecTXT_r1_CS5.indd 15 1/6/11 9:07 PM C a sc a d e Lu m i na i r e Product Number / Name k-0033 Cascade Petite Luminaire 27" Required information for all fixture orders ® 1 Product Information Lamping, Lamp Type Height Width Length Net Wt. Specify 8" 27" 35-43 lbs 203 mm 686 mm 15.9-19.5 kg Crystal strands in variable lengths Beads: K” dia (10 mm); Spheres: 1L” dia (40 mm) • Halogen Two, mrc-16, 50w max each, 12 volt integral transformers Other Information: UL listed (or equivalent) for damp locations Engraved plate with yearly edition 8" Pendant suspension system 27" Two 36˚ flood or two 13˚ spot lamps with opaque silver reflectors recommended. Cascade Round Luminaire (13”) 13" HAL Voltage: • 120 • 277 Color and veining of semi-precious stones will vary. Colored spheres may exhibit dye lot variations. Optional: • Pendant suspension system — must specify height overall Fixture must be properly supported due to weight. Ceilings with a 30˚ slope or less can be accomodated with suspension system. Height Specify Diameter 13" 330 mm Net Wt. 32-51 lbs 14.5-23.1 kg Crystal strands in variable lengths Beads: K” dia (10 mm); Spheres: 1L” dia (40 mm) Other Information: UL listed (or equivalent) for damp locations Engraved plate with yearly edition Polished aluminum plates pre-trimmed with crystal strands, elliptical satin aluminum ceiling plate with satin nickel mesh. Color and veining of semi-precious stones will vary. Colored spheres may exhibit dye lot variations. Pendant suspension system 13" Height Overall: • 26" 660 mm • 38" 965 mm • 50" 1270 mm • 72" 1829 mm • 96" 2438 mm • 120" 3048 mm Polished aluminum plates pre-trimmed with crystal strands, elliptical satin aluminum ceiling plate with satin nickel mesh. Designed by Todd Rugee Patent Utility: 6,863,423 B2. Patent Design: D482,815 S; D521,176 S; D533,299 S k-0034 2 Other Requirements Fixture must be properly supported due to weight. Ceilings with a 30˚ slope or less can be accomodated with suspension system. Designed by Todd Rugee Patent Utility: 6,863,423 B2. Patent Design: D508,294 S; D536,479 S; D538,460 S; D505,512 S • Halogen One, mrc-16, 50w max, 12 volt integral transformer 36˚ flood lamp with opaque silver reflector recommended. Height Overall: • 26" 660 mm • 38" 965 mm • 50" 1270 mm • 72" 1829 mm • 96" 2438 mm • 120" 3048 mm HAL Voltage: • 120 • 277 Optional: • Pendant suspension system — must specify height overall 3 Finish Sphere type: 100% coverage • Clear Crystal • Rock Crystal • Smoky Rock Crystal • Amethyst • Pale Blue • Pale Pink • Gloss Black 30% coverage • Rock Crystal • Smoky Rock Crystal • Amethyst • Pale Blue • Pale Pink • Gloss Black Sphere type: 100% coverage • Clear Crystal • Rock Crystal • Smoky Rock Crystal • Amethyst • Pale Blue • Pale Pink • Gloss Black 30% coverage • Rock Crystal • Smoky Rock Crystal • Amethyst • Pale Blue • Pale Pink • Gloss Black 15 07867_KC-SpecTXT_r1_CS5.indd 16 1/6/11 9:07 PM C a s c a d e Lu m i na i r e Product Number / Name k-0134 Cascade Round Luminaire (19”) 19" Required information for all fixture orders ® 1 Product Information Height Specify Diameter 19" 483 mm Lamping, Lamp Type Net Wt. 52-93 lbs 23.6-42.2 kg Crystal strands in variable lengths Beads: K” dia (10 mm); Spheres: 1L” dia (40 mm) Other Information: UL listed (or equivalent) for damp locations Engraved plate with yearly edition • Halogen Four, mrc-16, 50w max each, 12 volt integral transformers 36˚ flood lamps with opaque silver reflector recommended. • 120 • 277 Color and veining of semi-precious stones will vary. Colored spheres may exhibit dye lot variations. Optional: • Pendant suspension system — must specify height overall Fixture must be properly supported due to weight. 13" k-0135 Cascade Round Luminaire (25”) 25" Ceilings with a 30˚ slope or less can be accomodated with suspension system. Designed by Todd Rugee Patent Utility: 6,863,423 B2. Patent Design: D508,294 S; D536,479 S; D538,460 S; D505,512 S Height Specify Diameter 25" 635 mm Net Wt. 86-145 lbs 39-65.8 kg Crystal strands in variable lengths Beads: K” dia (10 mm); Spheres: 1L” dia (40 mm) Other Information: UL listed (or equivalent) for damp locations Engraved plate with yearly edition Polished aluminum plates pre-trimmed with crystal strands, elliptical satin aluminum ceiling plate with satin nickel mesh. Color and veining of semi-precious stones will vary. Colored spheres may exhibit dye lot variations. Fixture must be properly supported due to weight. Ceilings with a 30˚ slope or less can be accomodated with suspension system. Pendant suspension system 19" Designed by Todd Rugee Patent Utility: 6,863,423 B2. Patent Design: D508,294 S; D536,479 S; D538,460 S; D505,512 S Height Overall: • 26" 660 mm • 38" 965 mm • 50" 1270 mm • 72" 1829 mm • 96" 2438 mm • 120" 3048 mm HAL Voltage: Polished aluminum plates pre-trimmed with crystal strands, elliptical satin aluminum ceiling plate with satin nickel mesh. Pendant suspension system 2 Other Requirements • Halogen Five, mrc-16, 50w max each, 12 volt integral transformers 36˚ flood lamps with opaque silver reflector recommended. Height Overall: • 26" 660 mm • 38" 965 mm • 50" 1270 mm • 72" 1829 mm • 96" 2438 mm • 120" 3048 mm HAL Voltage: • 120 • 277 3 Finish Sphere type: 100% coverage • Clear Crystal • Rock Crystal • Smoky Rock Crystal • Amethyst • Pale Blue • Pale Pink • Gloss Black 30% coverage • Rock Crystal • Smoky Rock Crystal • Amethyst • Pale Blue • Pale Pink • Gloss Black Sphere type: 100% coverage • Clear Crystal • Rock Crystal • Smoky Rock Crystal • Amethyst • Pale Blue • Pale Pink • Gloss Black 30% coverage • Rock Crystal • Smoky Rock Optional: Crystal • Pendant • Amethyst suspension • Pale Blue system — • Pale Pink must specify • Gloss Black height overall 16 07867_KC-SpecTXT_r1_CS5.indd 17 1/6/11 9:07 PM C a s c ad e Lu m i na i r e Product Number / Name Required information for all fixture orders ® 1 Product Information k-0136 Cascade Round Luminaire (31”) 31" Height Specify Diameter 31" 787 mm Lamping, Lamp Type Net Wt. 132-225 lbs 59.9-102.1 kg Crystal strands in variable lengths Beads: K” dia (10 mm); Spheres: 1L” dia (40 mm) Other Information: UL listed (or equivalent) for damp locations Engraved plate with yearly edition • Halogen Nine, mrc-16, 50w max each, 12 volt integral transformers 36˚ flood lamps with opaque silver reflector recommended. Height Overall: • 26" 660 mm • 38" 965 mm • 50" 1270 mm • 72" 1829 mm • 96" 2438 mm • 120" 3048 mm HAL Voltage: Polished aluminum plates pre-trimmed with crystal strands, elliptical satin aluminum ceiling plate with satin nickel mesh. • 120 • 277 Color and veining of semi-precious stones will vary. Colored spheres may exhibit dye lot variations. Optional: • Pendant suspension system — must specify height overall Fixture must be properly supported due to weight. Ceilings with a 30˚ slope or less can be accomodated with suspension system. Pendant suspension system 2 Other Requirements 3 Finish Sphere type: 100% coverage • Clear Crystal • Rock Crystal • Smoky Rock Crystal • Amethyst • Pale Blue • Pale Pink • Gloss Black 30% coverage • Rock Crystal • Smoky Rock Crystal • Amethyst • Pale Blue • Pale Pink • Gloss Black Designed by Todd Rugee Patent Utility: 6,863,423 B2. Patent Design: D508,294 S; D536,479 S; D538,460 S; D505,512 S 25" k-0035 Cascade I Wall Bracket 14" 7¾" Height 24" 610 mm Width 14" 356 mm Projection 7I" 197 mm Net Wt. 30 lbs 13.6 kg Crystal strands in variable lengths Beads: K” dia (10 mm); Spheres: 1L” dia (40 mm) Center of outlet box to top of fixture: 2I"; 70 mm 24" Other Information: UL listed (or equivalent) for damp locations Engraved plate with yearly edition Polished aluminum plate pre-trimmed with crystal strands, polished aluminum crown with satin nickel mesh atop mirrored accent wall plate. 7¾" Color and veining of semi-precious stones will vary. Colored spheres may exhibit dye lot variations. Fixture must be properly supported due to weight. Designed by Todd Rugee Patent Utility: 6,863,423 B2. Patent Design: D505,513 S; D509,619 S • Halogen Two, mrc-16, 50w max each, 12 volt integral transformers Two 36˚ flood or 13˚ spot lamps with opaque silver reflectors recommended. HAL Voltage: • 120 • 277 Sphere type: 100% coverage • Clear Crystal • Rock Crystal • Smoky Rock Crystal • Amethyst • Pale Blue • Pale Pink • Gloss Black 30% coverage • Rock Crystal • Smoky Rock Crystal • Amethyst • Pale Blue • Pale Pink • Gloss Black 17 07867_KC-SpecTXT_r1_CS5.indd 18 1/6/11 9:07 PM C a sc a d e Lu m i na i r e Product Number / Name k-0036 Cascade II Wall Bracket 6¾" 8" Required information for all fixture orders ® 1 Product Information Height 24" 610 mm Width 6I" 171 mm Lamping, Lamp Type Projection 8" 203 mm Net Wt. 18 lbs 8.2 kg Crystal strands in variable lengths Beads: K” dia (10 mm); Spheres: 1L” dia (40 mm) Center of outlet box to top of fixture: 2I"; 70 mm • Halogen One, mrc-16, 50w max, 12 volt integral transformer 2 Other Requirements HAL Voltage: • 120 • 277 36˚ flood with opaque silver reflectors recommended. Other Information: UL listed (or equivalent) for damp locations Engraved plate with yearly edition 24" Polished aluminum plate pre-trimmed with crystal strands, polished aluminum crown with satin nickel mesh atop mirrored accent wall plate. 8" Fixture must be properly supported due to weight. Designed by Todd Rugee Patent Utility: 6,863,423 B2. Patent Design: D505,513 S; D509,619 S Cascade Luminaire Divide (12”) 12" Height Width Length Net Wt. Specify 4½" 12" 15-19 lbs 114 mm 305 mm 6.8-8.6 kg Crystal strands in variable lengths Beads: K” dia (10 mm); Spheres: 1L” dia (40 mm) Other Information: UL listed (or equivalent) for damp locations Engraved plate with yearly edition Polished aluminum plates pre-trimmed with crystal strands, rectangular satin aluminum ceiling plate with satin nickel mesh on all sides. Color and veining of semi-precious stones will vary. Colored spheres may exhibit dye lot variations. 4H" Designed by Todd Rugee Patent Utility: 6,863,423 B2; 7,220,027 B2 Patent Design: D533,299 S; D536,479 S Sphere type: 100% coverage • Clear Crystal • Rock Crystal • Smoky Rock Crystal • Amethyst • Pale Blue • Pale Pink • Gloss Black 30% coverage • Rock Crystal • Smoky Rock Crystal • Amethyst • Pale Blue • Pale Pink • Gloss Black Color and veining of semi-precious stones will vary. Colored spheres may exhibit dye lot variations. k-0060 3 Finish • Halogen Two, mrc-11 or mrc-8, 35w max each, 12 volt integral transformers Height Overall: • 26" 660 mm • 38" 965 mm • 50" 1270 mm • 72" 1829 mm • 96" 2438 mm • 120" 3048 mm HAL Voltage: • 120 • 277 Optional: End cap • Satin Aluminum Flat (k-0062) Sphere type: 100% coverage • Clear Crystal • Rock Crystal • Smoky Rock Crystal • Amethyst • Pale Blue • Pale Pink • Gloss Black 30% coverage • Rock Crystal • Smoky Rock Crystal • Amethyst • Pale Blue • Pale Pink • Gloss Black 18 07867_KC-SpecTXT_r1_CS5.indd 19 1/6/11 9:07 PM C a sc a d e Lu m i na i r e Product Number / Name k-0061 Cascade Luminaire Divide (24”) 24" Required information for all fixture orders ® 1 Product Information Height Specify Width 4½" 114 mm Lamping, Lamp Type Length 24" 610 mm Net Wt. 29-37 lbs 13.2-16.8 kg Crystal strands in variable lengths Beads: K” dia (10 mm); Spheres: 1L” dia (40 mm) • Halogen Four, mrc-11 or mrc-8, 35w max each, 12 volt integral transformers Other Information: UL listed (or equivalent) for damp locations Engraved plate with yearly edition 2 Other Requirements Height Overall: • 26" 660 mm • 38" 965 mm • 50" 1270 mm • 72" 1829 mm • 96" 2438 mm • 120" 3048 mm HAL Voltage: • 120 • 277 Polished aluminum plates pre-trimmed with crystal strands, rectangular satin aluminum ceiling plate with satin nickel mesh on all sides. Optional: End cap • Satin Aluminum Flat (k-0062) Color and veining of semi-precious stones will vary. Colored spheres may exhibit dye lot variations. Fixture must be properly supported at both ends. Designed by Todd Rugee Patent Utility: 6,863,423 B2; 7,220,027 B2 Patent Design: D533,299 S; D536,479 S 4H" k-0063 Cascade Luminaire Divide (“L”) 12½" Height Specify Width 4½" 114 mm Length 12½" 318 mm Net Wt. 29-37 lbs 13.2-16.8 kg Crystal strands in variable lengths Beads: K” dia (10 mm); Spheres: 1L” dia (40 mm) Other Information: UL listed (or equivalent) for damp locations Engraved plate with yearly edition Polished aluminum plates pre-trimmed with crystal strands, rectangular satin aluminum ceiling plate with satin nickel mesh on all sides. Color and veining of semi-precious stones will vary. Colored spheres may exhibit dye lot variations. Fixture must be properly supported at both ends. 4H" 12H" Designed by Todd Rugee Patent Utility: 6,863,423 B2; 7,220,027 B2 Patent Design: D533,299 S; D536,479 S • Halogen Four, mrc-11 or mrc-8, 35w max each, 12 volt integral transformers Height Overall: • 26" 660 mm • 38" 965 mm • 50" 1270 mm • 72" 1829 mm • 96" 2438 mm • 120" 3048 mm HAL Voltage: • 120 • 277 Optional: End cap • Satin Aluminum Flat (k-0062) 3 Finish Sphere type: 100% coverage • Clear Crystal • Rock Crystal • Smoky Rock Crystal • Amethyst • Pale Blue • Pale Pink • Gloss Black 30% coverage • Rock Crystal • Smoky Rock Crystal • Amethyst • Pale Blue • Pale Pink • Gloss Black Sphere type: 100% coverage • Clear Crystal • Rock Crystal • Smoky Rock Crystal • Amethyst • Pale Blue • Pale Pink • Gloss Black 30% coverage • Rock Crystal • Smoky Rock Crystal • Amethyst • Pale Blue • Pale Pink • Gloss Black 19 07867_KC-SpecTXT_r1_CS5.indd 20 1/6/11 9:07 PM f i n i s h o pt i o n s Depending on the fixture chosen, the following finishes are available: Polished Metal Finishes Antiqued Metal Finishes P/B P/CP P/N WPM AB/B Antiqued Boyd Brass A/CP Antiqued Copper BK/BS Blackened Brass Polished Brass Polished Copper Polished Nickel White Polished Metal Base metal finely satined buffed, gently hand rubbed with a darkening agent. A coat of clear lacquer or clear powder coat is applied to protect the finish. Base metal polished to a high lustre and then buffed using jeweler’s rouge. Finish is clear-coated to prevent oxidation. Except for the following finishes, the base metal is the same as the finished surface metal: – Polished nickel finish is nickel electroplated over brass, bronze or copper base metal. Hand-Applied Leaf Finishes WG White Gold 12 kt Italian white gold leaf Satin Metal Finishes WG/BB S/B Satin Brass S/CP Satin Copper S/N Satin Nickel YG Yellow Gold 22 kt Italian yellow gold leaf YG/RB Yellow Gold 22 kt Italian yellow gold leaf over Spanish Red Bole Base metal finely satin buffed, then clear-coated to prevent oxidation. Except for the following finishes, the base metal is the same as the finished surface metal: White Gold 12 kt Italian white gold leaf over Ultramarine Blue Bole – Satin nickel finish is nickel electroplated over a satin brass, bronze or copper base metal. l a mpi ng i dent i f i er h al o ge n MRC-8 MRC-11 MRC-16 i n c an de s c e n t A Lamp Medium Base B Lamp Candelabra Base G Lamp Candelabra Base T-10 Lamp Medium Base 20 07867_KC-SpecTXT_r1_CS5.indd 21 1/6/11 9:07 PM r epr e s e n t at i ve l o c at o r Please find your local Kentfield Collection representative from the list below. Some areas are split between commercial and residential firms. See pages 22-23 for complete contact information for your representative. united states Arkansas........................................... Donghia, DAL New York New York City (Five Boroughs) Commercial............................. High Tech Applications Residential............................... Donghia, NY Upstate..................................................Donghia, MA Arizona............................................ McNamara & Hirschman North Carolina.................................. Jerry Pair, Atlanta California Northern (Commercial).................. Boyd Lighting, SF Northern (Residential).................... Donghia, SF Southern..................................... Donghia, LA Colorado.......................................... John Brooks, Inc. North Dakota.................................... Rita Haberlach, Inc. Alabama........................................... Jerry Pair, Atlanta Alaska.............................................. Susan Mills Showroom Connecticut Fairfield County Only Commercial............................. High Tech Applications Residential............................... Donghia, NY Rest of State................................. Donghia, MA Ohio............................................... Donghia, OH Oklahoma........................................ Donghia, DAL Oregon............................................ Susan Mills Showroom Pennsylvania..................................... The Baer Group Rhode Island..................................... Donghia, MA South Carolina.................................. Jerry Pair, Atlanta South Dakota..................................... Rita Haberlach, Inc. Delaware........................................... The Baer Group Tennessee......................................... Jerry Pair, Atlanta District of Columbia (DC)................... Donghia, DC Texas Northern..................................... Donghia, DAL Southern..................................... Donghia, HOU Florida............................................ Jerry Pair, Dania Georgia............................................ Jerry Pair, Atlanta Hawaii............................................. Donghia, LA Idaho............................................... Susan Mills Showroom Illinois............................................ Donghia, CHI Indiana............................................ Donghia, OH Iowa................................................. Rita Haberlach, Inc. Kansas............................................. Belson & Associates Kentucky.......................................... Donghia, OH Louisiana Northern..................................... Donghia, DAL Southern..................................... Donghia, HOU Utah................................................ John Brooks, Inc. Vermont........................................... Donghia, MA Virginia........................................... Donghia, DC Washington State................................ Susan Mills Showroom Washington, DC................................. Donghia, DC West Virginia..................................... Donghia, DC Wisconsin Northwest only.............................. Rita Haberlach, Inc. Rest of state.................................. Donghia, CHI Wyoming.......................................... John Brooks, Inc. Maine.............................................. Donghia, MA canada Maryland.......................................... Donghia, DC Massachusetts.................................... Donghia, MA Quebec, New Brunswick, Nova Scotia and New Foundland........................... Télio, Montreal Michigan.......................................... Donghia, OH Eastern Manitoba and Ontario............. Télio, Toronto Minnesota........................................ Rita Haberlach, Inc. British Columbia, Alberta, Saskatchewan and Western Manitoba........................ Boyd Lighting, SF Mississippi........................................ Jerry Pair, Atlanta Missouri........................................... Belson & Associates Other.............................................. Boyd Lighting, SF Montana........................................... Susan Mills Showroom international Nebraska.......................................... Rita Haberlach, Inc. Australia, New Zealand....................... Cavit & Co. Nevada Southern..................................... Donghia, NV Northern..................................... Donghia, SF Germany, Austria and Switzerland......... Wohnkultur Hong Kong, China............................. Arthur & Company, LTD New Hampshire................................. Donghia, MA Japan and Korea................................ Weston International New Jersey Southern..................................... The Baer Group Northern Commercial............................. High Tech Applications Residential............................... Donghia, NY Qatar............................................... Gulf Lights Electrical New Mexico....................................... McNamara & Hirschman United Kingdom................................ Robert Spurway Singapore, Indonesia, India................. Design Mosaic Taiwan............................................. Yi & C Home Furnishings U.A.E.............................................. Abensal Lighting Other.............................................. Boyd Lighting, SF 21 07867_KC-SpecTXT_r1_CS5.indd 22 1/6/11 9:07 PM list o f re pre s e n t at i ve s u n i t e d s t at e s (see reverse for International) The Baer Group, Inc. 7292 Mill Spring Drive Ambler, PA 19002 (215) 654-9669 tel (215) 654-9667 fax baergroup@verizon.net Showroom: Phila. Marketplace Design Center 2400 Market Street Suite 212 Philadelphia, PA 19103 (215) 568-6980 tel (215) 568-6990 fax baershowroom@aol.com Belson Guinn Group 56 Morwood Lane (PO Box 411664) St. Louis, MO 63141 (800) 747-3300 toll free (314) 569-3300 tel (314) 993-9624 fax judd@belsonguinngroup.com Boyd Lighting – SF 944 Folsom Street San Francisco, CA 94107 (415) 778-4300 ext. 338 (415) 778-4319 fax info@boydlighting.com Donghia, Inc., CHI 222 Merchandise Mart Plaza Suite 631 Chicago, IL 60654 (312) 822-0766 tel (312) 822-0954 fax lblake@donghia.com Donghia, Inc., DAL Dallas Design Center 1025 N. Stemmons Freeway Suite 800 Dallas, TX 75207 (214) 741-1777 tel (214) 745-1777 fax lwallace@donghia.com Donghia, Inc., DC Washington Design Center 300 D Street SW, Suite 503 Washington, DC 20024 (202) 479-2724 tel (202) 488-9281 fax lallner@donghia.com Donghia, Inc., HOU Decorative Center of Houston 5120 Woodway Drive Suite 1000 Houston, TX 77056 (713) 355-7777 tel (713) 355-7778 fax bandrews@donghia.com 07867_KC-SpecTXT_r1_CS5.indd 23 Donghia, Inc., LA Pacific Design Center 8687 Melrose Avenue Suite G196 Los Angeles, CA 90069 (310) 657-6060 tel (310) 657-8453 fax lwinterstein@donghia.com Donghia, Inc., MA One Design Center Place Suite 401 Boston, MA 02210 (617) 574-9292 tel (617) 574-9295 fax sjones@donghia.com Donghia, Inc., NV 231 W. Charleston Blvd. Suite 160 Las Vegas, NV 89102 (702) 258-1616 tel (702) 258-2626 fax lmack@donghia.com Donghia, Inc., NY D & D Building 979 Third Avenue Suite 613 New York, NY 10022 (212) 935-3713 tel (212) 935-9707 fax mvannort@donghia.com Donghia, Inc., OH Ohio Design Centre 23533 Mercantile Road Suite 100 Beachwood, OH 44122 (216) 831-7797 tel (216) 831-9161 fax pbrown@donghia.com Donghia, Inc., SF San Francisco Design Center 101 Henry Adams Street Suite 144 San Francisco, CA 94103 (415) 861-7717 tel (415) 552-3113 fax kwallace@donghia.com High Tech Applications 66 Ford Road Suite 124 Denville, NJ 07834 (973) 784-4944 tel (973) 784-4949 fax allison@htalighting.com Jerry Pair & Assoc., Atlanta Atlanta Decorative Arts Center 351 Peachtree Hills Ave. NE Suite 508 Atlanta, GA 30305 (800) 367-7247 toll free (404) 261-6337 tel (404) 261-0795 fax valden@jerrypair.com Jerry Pair & Assoc., Dania Design Center of the Americas 1855 Griffin Road Suite B-170 Dania, FL 33004 (800) 642-7247 toll free (954) 923-3330 tel (954) 921-1916 fax jsauer@jerrypair.com John Brooks, Inc. 601 South Broadway Suite L Denver, CO 80209 (303) 698-9977 tel (303) 698-9797 fax info@johnbrooksinc.com McNamara & Hirschman 7350 N Dobson Road Suite 105 Scottsdale, AZ 85256 (480) 874-0707 tel (480) 874-0001 fax mcnhirsch@aol.com Rita Haberlach, Inc. International Market Square 275 Market Street Suite 411 Minneapolis, MN 55405 (888) 612-7482 toll free (612) 332-7482 tel (612) 339-7482 fax rita@ritahaberlach.com Susan Mills Showroom Seattle Design Center 5701 - 6th Avenue South Suite 200 Seattle, WA 98108 (800) 735-7145 toll free (206) 682-6388 tel (206) 682-6438 fax info@susanmills.com 22 1/6/11 9:07 PM list o f re pre s e n t at i ve s i n t e rn at i o n al (see reverse for United States) Abensal Lighting PO Box 60244 Dubai, UAE Showroom: Office No 210- 2nd Floor AL Owais Bldg Karama-Dubai, UAE 9714 3343931 tel 9714 3343932 fax nathalie@abensal.com Arthur & Company, LTD. 702 Fu Fai Commercial Centre 27 Hillier Street Sheung Wan, Hong Kong +852 (2522) 3368 tel +852 (2522) 3348 fax charlie@abc-art.com Cavit & Co. 741 High Street Armandale, Melbourne, VIC 3185 Australia +61 3 9509 2722 tel +61 3 9509 2744 fax kim@cavitco.com.au Cavit & Co. 148 Foveaux Street Surry Hills, Sydney, NSW 2010 Australia +61 2 9326 9161 tel +61 2 9326 9121 fax kim@cavitco.com.au Design Mosaic 9, Muthuraman Chetty Road #04-02 APS Building River Valley Close, 238931 Singapore 65 68361149 tel 65 63441164 fax kumar@designmosaic.com.sg Gulf Lights Electrical PO Box 2071 West Corner Centre, Salwa Road Doha, Qatar 00974 4699683/4/5 tel 00974 4699686 fax seema@gulflightsqatar.com Robert Spurway 101 Lots Road London SW10 0RN United Kingdom +44 (0)20 7351 6888 tel +44 (0)20 7351 9922 fax sales@robertspurway.com Télio, Montreal 4333, rue Ste-Catherine West Suite 300 Montréal, Québec H3Z 1P9 Canada (888) 855-6977 toll free (514) 842-9116 tel (514) 842-3728 fax raymond.telio@telio.com Télio, Toronto 160 Pears Avenue Suite 400 Toronto, Ontario M5R 3P8 Canada (877) 254-9855 toll free (416) 968-2020 tel (416) 968-7298 fax francis.leonard@telio.com Weston International 2643 Baker Street San Francisco, CA 94123 (415) 922-8432 tel (415) 922-8698 fax westoni@aol.com Wohnkultur Elbchaussee 97 22763 Hamburg Germany Showroom: Fasanenstr. 28 10719 Berlin Germany +49 (0)40 335553 tel +49 (0)40 335557 fax tcbehrens@aol.com Yi & C Home Furnishings 23 Lane 252, Section 1 Tun Hua S. Road Taipei, Taiwan 886 02 2776 6628 tel 886 02 2771 6515 fax yi8chang@ms65.hinet.net 23 07867_KC-SpecTXT_r1_CS5.indd 24 1/6/11 9:07 PM terms Pricing Product prices are NET, not “suggested” list prices. Freight prices are billed at net, FOB, Colorado Springs, Colorado. Designs and prices are subject to change without notice. Ordering The following specifications are required on all orders prior to production. 1. Product Number 2. Product Name 3. Lamping (Voltage) 4. Height Overall (if applicable) 5. Finish 6. Options (shade, diffuser, etc.) 7. Price Standards For stem hung fixtures, HOA (height overall) includes fixture, stem and canopy. Americans with Disabilities Act (ADA) Most of our wall sconces comply with the ADA requirements for public accessibility at any mounting height. Other wall sconces must be mounted at minimum mounting heights to comply. Product Safety Assurance All products have been tested and found in compliance by Underwriters Laboratory (UL) or an equivalent nationally recognized testing laboratory. Damp location fixtures are suitable for installation in: interior locations protected from weather but subject to moderate degrees of moisture, such as bathrooms; or protected locations under canopies, marquees and roofed open porches. Wet location fixtures are suitable for installation where the fixture is subject to saturation with water or other liquids, or where the fixture is mounted in an unprotected location and directly subjected to the weather. Canadian Standards Certification (CSA) Many products are UL certified to meet CSA standards. Contact Client Services for details. & de f i n i t i o n s Lamping All fixtures are wired for standard USA nominal voltage. For voltages other than 110/120 or 277 volt, please contact Client Services. Lamps are not included with orders except where noted. Maximum wattages and recommended lamp types have been provided. LED (Light Emitting Diodes) LED lamping provides energy savings, high efficiency, long-life and superb color temperature. LED fixtures include all lamp components. Fluorescent Ballasts All of our fluorescent fixtures use electronic ballasts. In some cases the ballast may require a remote installation. Please note that some remote ballasts must be located no more than five feet from the furthest lamp holder. Please contact your electrical engineer or contractor for proper remote ballast placement and specifications. Dimming Many of our LED and fluorescent fixtures are available with a dimming option at an upcharge. For pricing, please contact Client Services with the specification of the dimming control system being used. Credit and Terms If you are qualified to purchase and do not have an existing account with Kentfield or you have not yet established credit with us, your first order will be on a proforma basis (50% deposit to start production, 50% due prior to shipment). If you wish to establish credit, please contact your representative for a credit application. We use Dun & Bradstreet and Trade Management Services for additional credit resources. If you are approved for an open account, our terms are Net 30 days from the date of shipment. There may be deposits required on specific orders. Interest and storage fees may apply to outstanding invoices and orders. A $25.00 fee will be charged on all returned checks. Credit terms are subject to change without prior notification. Returns No returned merchandise will be accepted without prior written authorization and it must be packed with the same wrappings which were originally used, if available. If unsatisfactorily packed and if a freight claim cannot be made, you will be charged for repair and replacement of the damaged parts. A minimum restock ing charge of 30% plus packaging costs will be made on all authorized returns for credit. Each request will be evaluated independently and specific restocking charges may be higher. Claims All lamps and fixtures are shipped free of defects. If there is any loss or damage, concealed or otherwise, please notify your freight agent as well as Kentfield immediately. For shipments made by common carrier, claims for damage must be made directly to the carrier; for UPS damage, an inspection must be filed with UPS within 10 days of receipt of merchandise to allow for a replacement at no charge. Warranty One year product guarantee to the reseller: Kentfield warrants to the reseller, for one year only, from date of purchase that its products are free from defects of material or workmanship. Kentfield’s obligation is expressly limited to the repair or replacement of the fixture, only after prior written authorization has been granted. This warranty shall not apply to products which have been altered or repaired outside our factory or without our knowledge, nor shall it apply to costs incurred in the installation of warranted products. This warranty is in lieu of all other warranties, expressed or implied, and without limiting the generality of the foregoing phrase, excludes any implied warranty of merchantability. Also, there are no warranties which extend beyond the descriptions of the product on the company’s literature setting forth the terms of sale. 24 07867_KC-SpecTXT_r1_CS5.indd 25 1/6/11 9:07 PM N OT E S 07867_KC-SpecTXT_r1_CS5.indd 26 1/6/11 9:07 PM N OT E S 07867_KC-SpecTXT_r1_CS5.indd 27 1/6/11 9:07 PM N OT E S 07867_KC-SpecTXT_r1_CS5.indd 28 1/6/11 9:07 PM