Do Not Print This Page

Do Not Print This Page
PRINTING INSTRUCTIONS
SIZE: 11X17 INCHES
PRINT BOTH SIDES
COLORS: BLACK AND WHITE
PAPER: NOT SPECIFIED
FOLDS: 1
FINISHED SIZE: 8.5X11 INCHES
FOLD TO 8.5 X 11
COVER
INSIDE
BACK
The best way to
use your new
LEVO
YOUR LEVO BOOK HOLDER IS NOW READY TO SHOW YOU THE COOLEST WAY TO READ!
5
S
Y
B
Mounting
your book is
easiest with
the
ECURING
OUR
OOK
bookboard
Mounting your book is easiest with the bookboard on your lap while you sit.
the strap from itself to allow space to insert
Loosen
strap
your
bookthe
behind
thefrom itself to allow space to insert your book behind the pageplate.
firstbook
few under
pagesthe
ofleft
your book under the left page-plate.
first
fewPlace
pagesthe
of your
page-plate.
Pull the
downward, loop it around, and
firmly attach it to itself.
Pull the strap tightly downward, loop it around, and firmly attach it to itself.
Securing the right
Securing
the right
willbooks
depend on the size of your book. For large
the
size of your
book. page-plate
For large heavy
heavy
1/2100
to 4tolbs.)
leave for
100 to 150 pages for reading, and tightly strap
(2
1/2 tobooks
4 lbs.) (2
leave
150 pages
reading,
tightly
strap
thepage-plate.
rest under theFor small light books, you can leave more
the restand
under
the
right
right
pages for reading. Test your mount by flipping the bookboard upside down. Your
can leave more pages for reading. Test your
book should
remain
firmly in place.
mount
by flipping
the
down. Your book should remain firmly in
place.
Turning Pages
Turning pages is easy, even with one hand. First, grasp the top of the page with
your left hand (if you use your right hand, you might tear your page). Tug the
page to the left, releasing it from the pageholder. Of course, you can use your
right hand to lift the page-holder if you choose.
Next, turn the page and lift the left pageholder with your remaining fingers. Tuck
the page under the page-holder and release. It takes a couple turns to get the
hang of it. You can experiment with one and two handed page turning to develop
your own technique.
Owner’ss Manual
Item# 33760
Deluxe Tablet
et Floor Stand
MTM Warranty
We’re dedicated to making your
ur LEVO experience the best it can
be. We provide a Three Year Warranty
arranty with this model# 33778.
See our website for details: www.LEVOstore.com.
ww.LEVOstore.com.
MTM, Inc. is not responsible for damage to any device caused by
improperly securing device to LEVO.
Questions?
Please do not contact your retailer
LEVO FEATURES
TENSION DIALS
HEIGHT LOCKS
The four TENSION DIALS
can be tightened or
loosened to your desire
with a coin. Using
a screwdriver will
damage the TENSION
DIAL.
Adjusting your LEVO’s
height is quick with
our LEVO quick snaps.
ALWAYS HOLD THE
PLATFORM WHILE
ADJUSTING HEIGHT.
As the manufacturer, we are most knowledgeable of this item. If you have any questions
or issues regarding your new LEVO, use one of the methods below to contact our
customer service.
email: sales@bookholder.com
(best method to contact us)
Phone: 1-800-928-2322
Outside the USA 1-863-815-7077
www.LEVOstore.com
MTM Inc., U.S.A.
U.S. Patent No. 7,040,591 other patents pending
made in china
RECEPTACLE
Tension Dial (1)
Tension Ram ((1)
1)
ASSEMBLY
LEVO Deluxe Tablet Floor Stand - tem# 33778
TAB
6
Push Platform into Swing Arm until TAB snaps into
RECEPTACLE. Important - test the connection by pulling
on platform. Be sure the Platform does not pull out.
NOTE: this step is shown with optional Tablet Platform.
PUSH
Swing-arm (1)
Book Platform (1)
1
5
Triple Column (1)
PUSH
Top Connector
Cap (1)
CASTERS into
holes in bottom
of HEAVY BASE.
Connector
Center (1)
Base Cover (1)
Base Washer (2)
Mount the two page-holders
to the holes in the bottom
corners of the bookboard.
Book
Follow the diagram for correct
Platform hardware placement. Tighten
the small nut with just enough
force so the page-holders will
Small Nut
rotate with little effort. The
rotation lets you adjust the
Small Screw
page-holders to fit any size
book. NOTE: the small nut has
a friction fitting that keeps it
Small Washer
from loosening. You’ll need
to use a wrench (or pliers) to
Page Holder
tighten the nut.
Coin
Heavy Base (1)
TIGHTEN
Base Washer (2)
4
Casters (4)
2
2A
Separate
the Top
Connector
Cap and
Bottom
Connector
Cap from
Connector
Center
Bottom
Connector
Cap (1)
3
TENSION DIAL with coin until
snug. Do not overtighten. Do
not use a screwdriver.
SLOT
RECEPTACLE
NOTCH
TAB
2B SLIDE
2C SNAP
TOP
CONNECTOR
CAP in place.
TABS into
RECEPTACLES.
2D SPIN
CONNECTOR
CAP until very
tight.
SET
WASHER and
BASE COVER on
HEAVY BASE
SPIN
BOTTOM
CONNECTOR CAP
until very tight.