Quincy QR-25® Series Model 340

Transcription

Quincy
QR-25 Series
Model 340
®
Parts Manual · Record of Change 106
This manual contains important safety
information and should be made available
to all personnel who operate and/or
maintain this product. Carefully read this
manual before attempting to operate or
perform maintenance on this compressor.
Fill Out & Return
Warranty Registration Card Located Inside
Quincy
Compressor
True Blue Reliability
Manual No. 50216-106
®
TM
October 2001 Edition
INTRODUCTION
TABLE OF CONTENTS
This manual provides information for the following
QR-25 Series, Model 340 (Record of Change 106)
compressor versions:
Serial Number Identification ................................ 2
P
Control Version P
plain head assembly & no controls
PUL
Control Version PUL
plain head assembly with a pressure
relief valve
Ordering Replacement Parts ................................ 2
Quin-Cip Oil ............................................................ 2
Crankcase Lubricant Capacity .............................. 2
Crankshaft Group ................................................... 3
L
Crankcase Group ................................................... 4
Bearing Carrier Groups
with oil filter ..................................................... 5-6
less oil filter ..................................................... 7-8
Control Version L
head assembly with 2 unloader towers &
a hydraulic unloader
Connecting Rod & Piston Groups
low pressure .................................................. 9-10
high pressure .............................................. 11-12
S
Control Version S
head assembly with 2 unloader towers &
a pilot valve
LS
Control Version LS
head assembly with 2 unloader towers,
a hydraulic unloader, & a pilot valve
with a check valve assembly
Head Assemblies
Control Versions P ............................................ 15
Control Versions L, S, LS, LVD ....................... 16
Control Version LVD
head assembly with 2 unloader towers,
a hydraulic unloader, & a pilot valve
with a lockout & check valve
Discharge Valve Assembly ................................. 18
LVD
Cylinder & Head Groups
Control Version P ............................................. 13
Control Versions L, S, LS, LVD ....................... 14
Suction Valve Assembly ..................................... 17
Unloader Assembly ............................................. 19
Pneumatic Unloader Assembly .......................... 20
Control Groups
Version L ........................................................... 21
Version S ........................................................... 22
Version LS ........................................................ 23
Version LVD ...................................................... 24
These compressors are aircooled, two stage, two
cylinder, pressure lubricated compressors, with up
to 200 p.s.i. continuous pressure capability (201 to
500 p.s.i. intermittent pressure capability with proper
configuration; consult factory). The Model 340 has a
5-1/4" low pressure bore, a 3" high pressure bore, a
3-1/2" stroke and can be run at 400-900 r.p.m.
Pilot Valves .......................................................... 25
Pilot Valve Repair Kit .......................................... 25
Differential Setting Charts .................................. 25
Available options included in this manual:
-hooded air filter
-hooded air filter / silencer
-high pressure rated cylinder and head
Suction Valve Unloader Assemblies .................. 26
Hydraulic Unloader Assemblies ......................... 27
Decals ................................................................... 28
Gasket Set ............................................................ 28
Recommended Spare Parts ................................ 28
CHANGES
Kits ....................................................................... 28
since previous printing dated July 2000:
Typical Unit Repair Parts List ............................. 29
-Record of Change 106 involved redesigned head
and intercooler.
QR 340
50216-106, October 2001
Quincy Compressor
1
3501 Wismann Lane, Quincy IL. - 62305-3116
MODEL &
SERIAL NUMBER
IDENTIFICATION
QUIN-CIP OIL
®
Refer to the chart below to order Quin-Cip compressor oil from your local Authorized Quincy Distributor.
Record
of
Change No.
Model & Serial Number
Identification Tag
The model & serial number tag is located on the
handhole plate side of the crankcase. Fill in the
numbers from your compressor's tag in the corresponding spaces provided here and reference this
page when ordering replacement parts.
All replacement parts are to be ordered through
an authorized Quincy Compressor Distributor. Insist on genuine Quincy parts only! Failure to do so
may void warranty.
Package
Part No.
Description
Barrel
Pail
Gallon
Gallon Case
Quart
Quart Case
112541D032
112541P032
112541G032
112541X032
112541Q032
112541C032
55 gal., SAE 10W
5 gal., SAE 10W
1 gal., SAE 10W
(4)-1 gal., SAE 10W
1 qt., SAE 10W
(12)-1 qt., SAE 10W
Barrel
Pail
Gallon
Gallon Case
Quart
Quart Case
112542D068
112542P068
112542G068
112542X068
112542Q068
112542C068
55 gal., SAE 20
5 gal., SAE 20
1 gal., SAE 20
(4)-1 gal., SAE 20
1 qt., SAE 20
(12)-1 qt., SAE 20
Barrel
Pail
Gallon
Gallon Case
Quart
Quart Case
112543D100
112543P100
112543G100
112543X100
112543Q100
112543C100
55 gal., SAE 30
5 gal., SAE 30
1 gal., SAE 30
(4)-1 gal., SAE 30
1 qt., SAE 30
(12)-1 qt., SAE 30
CRANKCASE LUBRICANT
CAPACITY
ORDERING
REPLACEMENT PARTS
Model
Less Filter
With Filter
QR-340
43/4 qts. (4.5 lit.) Add 10 oz. (296 ml)
CAUTION !
Refer to the QR-25 Series Instruction Manual for vital
lubrication information.
Prompt service can be rendered on repair parts
orders if the following information is given:
CAUTION !
Item 1) the model number, record of change
number, & serial number.
Item 2) the exact part number needed. (Do not
order by item numbers.)
Item 3) the exact quantity needed.
Item 4) the preferred type of transportation
Follow all safety precautions outlined in the QR-25 Series
instruction manual.
WARNING !
Do not operate this compressor without a totally enclosed
belt guard or any other required safety equipment.
DANGER !
Air used for breathing or food processing must meet
O.S.H.A. 1910.134 or F.D.A. 21 C.F.R. 178.3570 regulations.
QR 340
50216-106, October 2001
Quincy Compressor
2
CRANKSHAFT GROUP 110524
Item
Number
1
1.1
1.2
1.3
1.4
1.5
1.6
2
2.1
2.2
2.3
3
Qty.
1
1
1
1
1
2
1
1
1
2
2
1
Part
Number
Description
110519
110518R
40775
2788
110234
121160
110705-F17
110523X
5836R
124571-N22
124373-N02
1466
crankshaft assembly includes:
crankshaft
bearing cone
bearing cone
orifice, 1/8 npt
pipe plug, 1/8 npt
roll pin, 3/16 x 1.38
sheave assembly includes:
sheave, 19-1/2", 4 gr, B sect., CCW (N.S.S.: order 110523X)
hex. screw, 1/2-20 unf x 3.25, grade 5 (@ 90 ft.-lbs.)
square nut, 1/2-20 unf
taper key
CRANKSHAFT GROUP 110524-001
(for basic compressors used on FE 340 units)
Item
Number
1
1.1
1.2
1.3
1.4
1.5
1.6
2
2.1
2.2
2.3
3
Qty.
1
1
1
1
1
2
1
1
1
2
2
1
Part
Number
Description
110519
110518R
40775
2788
110234
121160
110705-F17
110975X
110975R
124571-N22
124373-N02
1466
crankshaft assembly includes:
crankshaft
bearing cone
bearing cone
orifice, 1/8 npt
pipe plug, 1/8 npt
roll pin, 3/16 x 1.38
sheave assembly includes:
sheave, 16", 2 gr, B sect., CCW (N.S.S.: order 110975X)
hex. screw, 1/2-20 unf x 3.25, grade 5 (@ 90 ft.-lbs.)
square nut, 1/2-20 unf
taper key
1.6
N.S.S. = Not Sold Separate
@ Indicates torque value in foot pounds (dry threads)
For reversal of compressor rotation refer to QR-25 instruction manual.
1.1
1.3
3
2.2
1.5
2.1
1.4
1.2
2.3
QR 340
50216-106, October 2001
Quincy Compressor
3
CRANKCASE GROUP 110628-002
Item
Number
Part
Number
Qty.
1
1.1
1.2
2
3
4
5
6
7
8
9
10
11
12
13
13.1
13.2
13.3
14
15
16
1
1
1
1
*
*
*
*
1
4
2
1
1
12
1
1
1
2
1
1
12
Description
6904X
6904R
3720
2057
1383
1383A
1383B
1383D
6930
123478-L12
1315
1249-1
6849-1
123478-K12
6726X001
5488-001
6726
123157-210
5783
5932
110428N031
crankcase assembly
crankcase (N.S.S.; order 6904X)
bearing cup
pipe plug, 1/2 npt
bearing adjustment shim, .005 steel
adjustment plate (.0015 / .003 crankshaft end play)
hex. screw, 3/8-16 unc x 1.00, grade 5 (@ 30 ft.-lbs.)
inspection plate gasket
inspection plate
inspection plate
oil gauge assembly
oil gauge rod (N.S.S.; order 6726X001)
oil gauge knob (N.S.S.; order 6726X001)
"o"ring, 1/8" wide x 1.00 o.d.
breather ball
drive pin
flatwasher, 5/16
16
10
12
1.1
9
14
13.2
8
7
6
5
4
13.1
3
1.2
13.3
15
9
16
12
2
11
QR 340
50216-106, October 2001
Quincy Compressor
4
BEARING CARRIER GROUP 110820-001
(with oil filter)
QR 340
50216-106, October 2001
Quincy Compressor
5
BEARING CARRIER GROUP 110820-001
(with oil filter)
Item
Number
*1
1.1
*
*
*
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
1.10
1.11
1.12
1.13
1.14
1.15
1.16
2
3
§ 4
5
6
7
8
9
Qty.
Part
Number
1
1
110812-003
110812
1
2
1
1
1
1
1
1
1
6
2
1
1
1
1
1
1
1
8
1
1
1
2
2
1
2720
160005
123157-152
123157-112
160002-001
160075-001
160003
6285
110813-001
123777-J12
2719
5489
123157-011
124369-P02
1160
112857
121160
5502
123478-L12
110822
6679
110659
123115-06C
123478-L11
110825
Description
bearing carrier assembly
includes:
bearing cup
bronze bushing
"o"ring, 3/32 wide x 3.44 o.d.
"o"ring, 3/32 wide x .69 o.d.
bearing carrier driveshaft
driveshaft key
pump gerotor
retaining ring
oil pump housing
hex screw, 1/4-20 unc x 1.00, grade 5 (@ 6 ft.-lbs.)
pipe plug, 1/4 npt
adjustment screw
"o"ring, 1/16 wide x .44 o.d. (oil pressure adjustment screw)
jamnut, 9/16-18 unf
spring
needle valve
pipe plug, 1/8 npt
bearing carrier gasket
oil pressure gauge
gasket, oil inlet bracket
oil pickup tube
lockwasher, 3/8
hex. screw, 3/8-16 unc x .88, grade 5 (@ 30 ft.-lbs.)
oil filter stud
Maintenance Parts
* 10
110814-001
160079
110812X003
oil filter (six pack)
Oil Pump Repair Kit
(includes 1 each of items 1.2, 1.3, 1.4, 1.5, 1.6, 1.7, & 1.12)
Replacement Bearing Carrier Assembly
(includes 1 each of items 1, 2, 5, 9, & 1 oil filter)
* Can not be used with diester or phosphate ester based synthetic lubricants.
§ Install with Teflon® tape.
QR 340
50216-106, October 2001
Quincy Compressor
6
BEARING CARRIER GROUP 110820
(less oil filter)
QR 340
50216-106, October 2001
Quincy Compressor
7
BEARING CARRIER GROUP 110820
(less oil filter)
Item
Number
1
1.1
*
*
*
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
1.10
1.11
1.12
1.13
1.14
1.15
2
3
§ 4
5
6
7
8
Qty.
Part
Number
1
1
110812-002
110812
1
2
1
1
1
1
1
1
1
6
2
1
1
1
1
1
1
8
1
1
1
2
2
2720
160005
123157-152
123157-112
160002-001
160075-001
160003
6285
110813
123777-J12
2719
5489
123157-011
124369-P02
1160
112857
5502
123478-L12
110822
6679
110659
123115-06C
123478-L11
Description
includes:
bearing cup
bronze bushing
"o"ring, 3/32 wide x 3.44 o.d.
"o"ring, 3/32 wide x .69 o.d.
bearing carrier driveshaft
driveshaft key
pump gerotor
retaining ring
oil pump housing
hex screw, 1/4-20 unc x 1.00, grade 5 (@ 6 ft.-lbs.)
pipe plug, 1/4 npt
adjustment screw
"o"ring, 1/16 wide x .44 o.d. (oil pressure adjustment screw)
jamnut, 9/16-18 unf
spring
needle valve
bearing carrier gasket
oil pressure gauge
oil pickup tube
lockwasher, 3/8
hex. screw, 3/8-16 unc x .88, grade 5 (@ 30 ft.-lbs.)
Maintenance Parts
160079
110812X002
Oil Pump Repair Kit
(includes 1 each of items 1.2, 1.3, 1.4, 1.5, 1.6, 1.7, & 1.12)
Replacement Bearing Carrier Assembly
(includes 1 each of items 1, 2, & 5)
* Can not be used with diester or phosphate ester based synthetic lubricants.
§ Install with Teflon® tape.
QR 340
50216-106, October 2001
Quincy Compressor
8
CONNECTING ROD & PISTON GROUP 110749
(low pressure)
1.2
RING GAPS TO BE STAGGERED
WHEN ASSEMBLED.
PIP MARKS INDICATE
TOP SURFACE OF RING.
6
1.3
6
5
6
2
7
4
1.1
1.4
3
8
2
QR 340
50216-106, October 2001
Quincy Compressor
9
(low pressure)
Item
Number
1
1.1
1.2
1.3
1.4
2
3
4
5
6
7
8
Qty.
Part
Number
Description
1
1
1
2
2
2
1
1
1
3
2
2
40081
110802R
6443
1344
1319
8648
110146
8642
2033
9666
6656
124471-M08
connecting rod assembly (N.S.S.; order 6655X)
connecting rod (N.S.S.; order 6655X)
connecting rod bearing (N.S.S.; order 6443SR)
connecting rod bolt, 7/16-20 unc x 3.25
connecting rod bolt washer
retaining ring
piston pin
piston
oil ring
piston ring
connecting rod insert (sold in pairs only; see maintenance parts)
locknut, 7/16-20 unf (@ 40 ft.-lbs.)
1
1
1
1
1
1
6656PR
6656-010PR
6443SR
8642-010
8642-020
7595A
1
4450-010
1
4450-020
1
8642X
inserts, connecting rod (1 pair, standard size)
inserts, connecting rod (1 pair, .010 undersize)
replacement connecting rod bearing
piston, low pressure (.010 oversize)
piston, low pressure (.020 oversize)
Piston Ring Set (standard)
includes piston rings & oil ring
Piston Ring Set (.010 oversize, light blue color code)
includes includes piston rings & oil ring
Piston Ring Set (.020 oversize, yellow color code)
includes includes piston rings & oil ring
Piston Assembly, low pressure (standard)
includes ring set, piston pin, retaining rings, & piston
Piston Assembly, low pressure (.010 oversize)
Piston Assembly, low pressure (.020 oversize)
Replacement Connecting Rod Assembly
includes connecting rod assembly, connecting rod inserts, & locknuts
Maintenance Parts
7
7
1.2
4
4
8642X010
8642X020
6655X
QR 340
50216-106, October 2001
Quincy Compressor
10
(high pressure)
RING GAPS TO BE STAGGERED
WHEN ASSEMBLED.
PIP MARKS INDICATE
TOP SURFACE OF RING.
7
7
1.2
7
1.3
5
6
1.5
5
8
1.1
4
2
2
3
1.4
9
QR 340
50216-106, October 2001
Quincy Compressor
11
(high pressure)
Item
Number
1
1.1
1.2
1.3
1.4
1.5
2
3
4
5
6
7
8
9
Qty.
Part
Number
Description
1
1
2
2
2
1
2
1
1
2
1
3
2
2
110804
110802
110799-010
1344
1319
110801-001
8648
110190-008
2008-001
6451
6450
1648
6656
124471-M08
connecting rod assembly (N.S.S.; order 110804X)
connecting rod (N.S.S.; order 110804X)
needle bearing
connecting rod bolt, 7/16-20 unc x 3.25
connecting rod bolt washer
orifice plug
retaining ring
piston pin
piston
oil ring rail
expander ring
piston ring
connecting rod insert (sold in pairs only; see maintenance parts)
locknut, 7/16-20 unf (@ 40 ft.-lbs.)
1
1
1
1
1
6656PR
6656-010PR
2008-011
2008-021
6452A
1
4425-010
1
4425-020
1
2008X001
inserts, connecting rod (1 pair, standard size)
inserts, connecting rod (1 pair, .010 undersize)
piston, high pressure (.010 oversize)
piston, high pressure (.020 oversize)
Piston Ring Set (standard)
includes piston rings, oil ring rails & expander
Piston Ring Set (.010 oversize, light blue color code)
includes includes piston rings, oil ring rails & expander
Piston Ring Set (.020 oversize, yellow color code)
includes includes piston rings, oil ring rails & expander
Piston Assembly, high pressure (standard)
Piston Assembly, high pressure (.010 oversize)
Piston Assembly, high pressure (.020 oversize)
Replacement Connecting Rod Assembly
includes connecting rod assembly, connecting rod inserts, & locknuts
Maintenance Parts
8
8
4
4
2008X011
2008X021
110804X
QR 340
50216-106, October 2001
Quincy Compressor
12
CYLINDER & HEAD GROUP 115047-001
(control version P)
QR 340
50216-106, October 2001
Quincy Compressor
13
CYLINDER & HEAD GROUP 115047-002
(control versions L, S, LS & LVD)
QR 340
50216-106, October 2001
Quincy Compressor
14
HEAD ASSEMBL
Y 114984P
ASSEMBLY
(control version P)
QR 340
50216-106, October 2001
Quincy Compressor
15
HEAD ASSEMBL
Y 114984UU
ASSEMBLY
(control versions L, S, LS & LVD)
QR 340
50216-106, October 2001
Quincy Compressor
16
SUCTION VAL
VE ASSEMBL
Y 7277X1
VALVE
ASSEMBLY
QR 340
50216-106, October 2001
Quincy Compressor
17
DISCHARGE V
AL
VE ASSEMBL
Y 7271X002
VAL
ALVE
ASSEMBLY
QR 340
50216-106, October 2001
Quincy Compressor
18
UNLOADER ASSEMBL
Y 40192
ASSEMBLY
QR 340
50216-106, October 2001
Quincy Compressor
19
PNEUMA
TIC UNLOADER ASSEMBL
Y 40055
PNEUMATIC
ASSEMBLY
QR 340
50216-106, October 2001
Quincy Compressor
20
CONTROL GROUP 110860
(control versions L)
Item
Number
Qty.
Part
Number
Part
Number
1
2
3
4
1
3
4 ft.
1
0-200 p.s.i.
110827-001
1642
110515-025
1665
201-500 p.s.i.
110827-002
1642
110515-025
1665
113225
113225
Description
hydraulic unloader assembly
tube fitting, 90° male elbow, 1/4 tube x 1/8 npt
copper tube, 1/4 o.d.
tube fitting, male branch tee, 1/4 tube x 1/4 tube x 1/8 npt
Maintenance Parts
Hydraulic Unloader Repair Kit
includes diaphragm, stem assembly, inlet filter & fitting assembly,
spring (0-200 p.s.i.) and spring (201-500 p.s.i., red color code)
Parts for Special Applications
(for use with diester or phosphate ester synthetic lubricants)
1
1
1
1
110827-003
110827-004
2
hydraulic unloader assembly (standard, 0-200 p.s.i.)
hydraulic unloader assembly (high pressure, 201-500 p.s.i.)
4
3
2
2
1/4 o.d. tube
from receiver
1
QR 340
50216-106, October 2001
Quincy Compressor
21
(control version S)
Item
Number
1
* 1.1
1.2
1.3
1.4
1.5
2
3
4
5
Qty.
Part
Number
1
1
1
1
1
1
4 ft.
1
1
1
0-200 p.s.i.
110844
110832-140
2616
6317
160047-J05
2719
110515-025
1665
1642
2708
Part
Number
201-500 p.s.i.
110844-999
110832-999
2616
6317
160047-J05
2719
110515-025
1665
1642
2708
Description
pilot valve assembly
pilot valve
tube fitting, straight male connector, 3/8 tube x 1/4 npt
mounting stud
set screw, 1/4-28 unf x .38, grade 5
pipe plug, 1/4 npt, hex socket
* See page 25 for optional pilot valves that must be used with respective pressure ranges.
4
2
3
2
1.5
1.1
5
1.3
1.4
1.2
3/8 o.d. tube
from receiver
QR 340
50216-106, October 2001
Quincy Compressor
22
(control version LS)
Item
Number
1
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
1.10
2
3
4
5
Qty.
Part
Number
Part
Number
1
1
1
1
1
1
2
1 ft.
1
1
1
4 ft.
1
1
1
0-200 p.s.i.
110845
111422-175
110827-001
6317
160047-J05
7361
1642
110515-025
124393-004
2708
2616
110515-025
1665
1642
2708
201-500 p.s.i.
110845-001
111422-999
110827-002
6317
160047-J05
7361
1642
110515-025
124393-004
2708
2616
110515-025
1665
1642
2708
113225
113225
Description
pilot valve assembly
pilot valve
mounting stud
brass pipe tee, 1/4 npt x 1/4 npt x 1/4 npt
Maintenance Parts
spring (0-200 p.s.i.) and spring (201-500 p.s.i. red color code)
1
1
1
1
110827-003
110827-004
4
3
1.6
2
1.6
1.7
1.1
1.8
1.7
5
1.2
1.5 1.9
1.10
3/8 o.d. tube
from receiver
1.3
1.4
QR 340
50216-106, October 2001
Quincy Compressor
23
(control version LVD)
Item
Number
1
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
1.10
2
3
4
5
Qty.
Part
Number
Part
Number
1
1
1
1
1
1
2
1 ft.
1
1
1
4 ft.
1
1
1
0-200 p.s.i.
110846
111423-140
110827-001
6317
160047-J05
7361
1642
110515-025
124393-004
2708
2616
110515-025
1665
1642
2708
201-500 p.s.i.
110846-001
111423-999
110827-002
6317
160047-J05
7361
1642
110515-025
124393-004
2708
2616
110515-025
1665
1642
2708
113225
113225
Description
pilot vlave assembly
pilot valve
mounting stud
brass pipe tee, 1/4 npt x 1/4 npt x 1/4 npt
Maintenance Parts
spring (0-200 p.s.i.) and spring (201-500 p.s.i. red color code)
1
1
1
1
110827-003
110827-004
2
4
3
2
1.6
1.6
1.1
1.7
1.7
5
1.8
1.2
1.5 1.9
1.10
1.4
3/8 o.d. tube
from receiver
1.3
QR 340
50216-106, October 2001
Quincy Compressor
24
PILOT V
AL
VES
VAL
ALVES
check
ball
1
Available Pilot Valves
4
3
Refer to illustrations at left to determine pilot valve series; add
dash # listed below per pressure setting.
differential adjustment
Pressure Setting
(p.s.i.)
Dash #
-997
air out to 2
head unloaders
unload adjustment
toggle lever
110832 series pilot valve (control version S)
1
check
ball
Notes
adjustable unload pressure /
customer to set, see differential setting chart
-998
71-150
-999
151-400
-000
401-500
Additional factory preset valves are available upon request.
air from
receiver
air
from
receiver
30-70
Pilot Valve Repair Kit 110832-051
Can be used to repair 110832, 111422 & 111423 series pilot
valves. Customer must specify which spring when ordering
pilot valve repair kit.
3
2
4
Item
#
Qty.
toggle lever
unload adjustment
1
2
3
4
5
air in from hydraulic
unloader
air out to head
unloaders
111422 series pilot valve (control version LS)
1
check
ball
5
Part
Number
2
1
1
1
110832-052
1
110832-053
1
110832-054
1
110832-055
1
6196-003
Description
screen
filter
"o"ring
replacement spring, pilot
valve, 30-70 p.s.i. (red)
valve, 71-150 p.s.i. (yellow)
valve, 151-400 p.s.i. (green)
valve, 401-500 p.s.i. (black)
disc
Differential Setting Chart
air
inlet
3
2
4
knurled
knob
unload adjustment
5
air in from hydraulic
unloader
air out to head
unloaders
111423 series pilot valve (control version LVD)
WARNING !
Not all pilots are for use with all compressor systems. Make
sure that the pilot you order is set within the safe operating
limits of your compressor. Failure to heed this warning
could result in an explosion.
QR 340
50216-106, October 2001
Spring Part #
(item 4)
Unload
(p.s.i.)
Min. Dif.
(p.s.i.)
Max. Dif.
(p.s.i.)
110832-052
"
"
"
"
110832-053
"
"
"
"
"
"
"
110832-054
"
"
"
"
"
"
110832-055
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
175
200
250
300
400
500
2
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
10
10
30
40
4
8
8
8
10
10
12
13
15
15
18
18
20
15
20
23
25
30
40
50
75
Quincy Compressor
25
SUCTION VALVE
UNLOADER ASSEMBLIES
unloader assembly, can be converted to constant
speed. Consult your local Quincy Compressor Distributor for assistance with conversion procedures.
Description
Service
The Quincy suction valve unloader assembly consists of unloading arrangements on the suction valves,
having a plunger to contact the suction valve disc
and an unloader pilot valve (part no.s 110832-***,
and 111422-*** & 111423-***) to automatically regulate the passing of receiver pressure to the unloading arrangement.
Periodically check the filter & screens in the inlet of
the pilot valve to make sure they are free of obstructions. If they become clogged, remove and clean or
replace. Inspect the "o"ring located in the opposite
end of the pilot valve body for wear or damage;
replace if necessary.
Adjustment
Application
The unloading pressure is adjustable and is regulated by turning the hex nut (marked "unload adj."
in cross sectional illustrations of pilot valves). Turn
the hex nut clockwise to increase and counterclockwise to decrease the unloading pressure.
Suction valve unloader assemblies are recommended
for use on Quincy compressors where the compressor is to run continuously and a constant pressure is
to be maintained. The purpose is to automatically
unseat the suction valve of the compressor when the
air supply is greater than the demand.
The differential (difference between unloading
and loading pressure) is set by turning the hex nut
(marked "differential adj." in the cross sectional
illustrations of the pilot valves). Increase the differential pressure by turning the hex nut clockwise decrease by turning counterclockwise. Tighten the
locknuts after adjustment.
Operation
Unloading occurs when receiver pressure is sufficient to overcome pilot valve spring pressure. The
check ball is then unseated, allowing receiver pressure to pass to the unloading arrangements. The
compressor will run unloaded until the receiver
pressure drops to a predetermined level. At this
time, the action of the ball is reversed, shutting off
receiver pressure to the unloader arrangement and
venting the unloader to atmosphere. This allows the
compressor to load. The drive, either electric motor
or combustion engine, runs continuously and must
be started and stopped manually.
CHECK VALVE
ASSEMBLIES
1
Pilot valve 111423-*** can be locked out, for
models equipped with dual control, to provide automatic start/stop operation. The knurled knob at the
top of the pilot can be turned clockwise, until it stops,
to lock it out. A pressure switch is required to stop
the motor. Failure to use a pressure switch, with the
pilot valve locked out, could result in unsafe conditions.
2
WARNING !
Check Valve Assembly Replacement Parts
A pressure switch must be incorporated whenever pilot
valve 111423-*** is employed as part of the control system.
Item
#
Qty.
Part
Number
Description
6194X2
123157-010
6196-002
Check Valve Assembly
"o"ring
disc
6194X3
Check Valve Assembly
The compressor will operate in the continous run
mode if the knurled knob is turned counterclockwise
until it stops.
1
2
Installation
1
2
The pilot valve is to be connected to the air receiver
using a minimum of 3/8" o.d. copper tube. Compressors in the field, not equipped with a suction valve
QR 340
50216-106, October 2001
1
1
1
1
22749-010
6196-003
"o"ring
disc
Quincy Compressor
26
HYDRAULIC UNLOADER ASSEMBLIES
Hydraulic Unloader 110827-001 & 110827-003*
*for use with diester or phosphate ester synthetic lubricants
Not all hydraulic unloader assemblies are for use with all compressor
systems. Make sure that the hydraulic unloader assembly you order
is within the operating limits of your system.
Hydraulic Unloader Assembly Repair Kit 113225
Item
#
Qty.
1
2
1
1
3
1
4
1
Part
Number
Description
diaphragm
stem assembly
(includes 2 - "o"rings)
filter assembly
(includes fitting & screens)
spring
QR 340
50216-106, October 2001
Quincy Compressor
27
Head Kit K340A
Item
#
Qty.
6
6
6
2
2
2
2
1
1
2
Part
Number
1846
7270
1848
6682
1852
1556
1855
6680
110377E100
5702
Basic Compressor Repair Kit 110823-340
Item
#
Qty.
Description
valve disc
valve spring
gasket, valve
valve cover gasket
gasket, valve cover
gasket, valve
diaphragm
cylinder to head gasket
air filter element
intercooler to head gasket
1
1
1
1
1
1
1
1
2
2
6
1
1
6
1
1
Overhaul Kit K340B
Item
#
Qty.
1
2
6
2
6
1
1
1
Part
Number
110377E100
1855
1846
6656PR
7270
7088
6452A
7595A
Description
air filter element
diaphragm
valve disc
connecting rod inserts (1 pair)
valve spring
gasket set
ring set
ring set
1
1
1
2
2
Part
Number
6443SR
110190-008
110146
110799-010
8648
3
3
1
1
1
1
2
2
1
1
Part
Number
110190-008
110377E100
110774
110814
2720
2788
3720
40775
6443SR
6656PR
7270
7088
6452
1846
110146
7595
Item
#
Qty.
Part
Number
2
3
5
3
2
2
6
2
1
1
2
1
1
2
1
Description
con-rod bearing
piston pin
piston pin
needle bearing
retaining ring
Recommended Spare Parts
Item
#
Qty.
Description
piston pin
air filter element
"o"ring kit
oil filter
bearing cup
bearing cone
bearing cup
bearing cone
connecting rod bushing
valve spring
gasket set
ring set
valve disc
piston pin
ring set
Gasket Set 7088
Piston Pin Kit K340E
Item
#
Qty.
Part
Number
1315
1383
1383A
1383B
1383D
1556
1848
1852
5502
5827-2
5828
5702
6679
6682
6680
Description
inspection plate gasket
bearing adj. shim, .005 steel
gasket
valve gasket
valve cover gasket
gasket
gasket, cylinder to crankcase
gasket, companion flange
gasket, intercooler to head
valve cover gasket
gasket, cylinder to head
Description
7277X
7271X02
replacement suction valve assy.
replacement discharge valve
assy.
110822
pressure gauge
160079
oil pump repair kit
7088
gasket set
113225
hydraulic unloader repair kit
6656PR
1855
unloader diaphragm
110832-051 pilot repair kit
110377E100 air filter element
2
3
1
V.I.P. Kit 110516-340
Item
#
Qty.
1
2
6
6
2
6
6
1
Part
Number
110822
1855
1857
1846
6283
7270
6910
7088
Decals
Description
Item
#
Qty.
oil pressure gauge
diaphragm
valve pin
valve disc
hydraulic unloader filter
valve spring
valve spring
gasket set
1
2
50216-106, October 2001
Description
serial number & nameplate
decal, CAUTION!/manual/
"Failure to follow..."
3
1
127889-B
decal, DANGER! /
"Air used for breathing..."
* Not sold separate; order 127889.
QR 340
1
1
Part
Number
110831
127889-A
Quincy Compressor
28
TYPICAL UNIT REP
AIR P
AR
TS LIST
REPAIR
PAR
ARTS
The parts listed here are for standard QR 340 (up to 175 p.s.i.) units and may or may not be applicable to custom built units. Check with
your local authorized Quincy Compressor Distributor for parts that can be used for custom built units. Make sure the components you order
are rated within the safe operating limits of your system. If you are doubtful about which components to order, contact you local Quincy
distributor.
(QR 340 simplex - horizontal tank - electric motor)
Part
Qty Number
1
1
1
1
1
1
1
3.5 ft.
2
80 gal.
113269-200
113276
2713
111136-100
110514-300
110512-003
110513-200
110515-100
111265-100
2
1
1
1
7.5 H.P.
110258B082
3202
111967K002
110484
1
200v, 3Ø
8393
Part
Number
Part
Number
120 gal.
113271-200
* 113280
111136-050
111136-100
110514-300
110512-003
110513-200
110515-100
111265-100
Description
tank (200 p.s.i. max. working pressure)
top plate
tank drain valve
ball valve
pressure gauge
§ pressure switch (135-175 p.s.i.)
pressure relief valve (200 p.s.i.)
! discharge tube (1" copper tube to be formed by customer)
ferrule (for discharge tube)
drive belt
motor pulley
belt guard assembly
motor pulley bushing
230/460v, 3Ø
124517-009
7.5 h.p. motor (O.D.P.)
(QR 340 duplex - horizontal tank - electric motor)
Part
Qty Number
1
2
1
1
1
2
1
7 ft.
2
120 gal.
113467-200
113280
111136-050
111136-100
110514-300
110512-003
110513-200
110515-100
111265-100
4
2
2
1
7.5 H.P.
110258B082
3202
111967K002
110484
2
200v, 3Ø
8393
Part
Number
200 gal.
113469-200
113280
111136-050
111136-100
110514-300
110512-003
110513-200
110515-100
111265-100
Part
Number
Description
tank (200 p.s.i. max. working pressure)
top plate
tank drain valve
ball valve
pressure gauge
pressure switch (135-175 p.s.i.)
pressure relief valve (200 p.s.i.)
! discharge tube (1" copper tube to be formed by customer)
ferrule (for discharge tube)
drive belt
motor pulley
belt guard assembly
motor pulley bushing
230/460v, 3Ø
124517-009
7.5 h.p. motor (O.D.P.)
* 113280 top plate is also used for all QR 340 base mounted electric motor driven units.
§ 2298-175 pressure switch on base mounted units.
Part numbers shown in italics apply to tank mounted units and base mounted units.
! Pre-formed discharge tubes are available. Contact factory with model & tank size information.
QR 340
50216-106, October 2001
Quincy Compressor
29
Quincy Service is always near.
There are authorized Quincy
Distributors located throughout
the United States & Canada that
stock genuine Quincy parts &
accessories for a wide range of
Quincy products.
Quincy Service specialists are
factory trained and will help keep
you in business. Call for
Authorized Quincy Service.
Quincy
Compressor
True Blue Reliability
®
TM
Reciprocating / Systems:
217.222.7700
Rotary / Vacuum / Systems:
334.937.5900
Nearest Distributor:
888.424.7729
E-mail:
Discover:
trueblue.quincy@goodrich.com
www.quincycompressor.com
© 2001 Quincy Compressor a Goodrich Corporation Business
All Rights Reserved. Litho in U.S.A.

Quincy QR-25® Series Model 340

Transcription

Similar documents

Quincy Compressor® Quincy QR

Parts-Manual-Quincy-325-Pump - Fluid

Arbeitslos vor der Rente

Selbstständig und Arbeitslosengeld II

Arbeitslosigkeit droht – was tun?