OpenInsight Install Guide

OpenInsight Install Guide
Version 9.4
A Division of Revelation Technologies, Inc.
COPYRIGHT NOTICE
© 1996-2013
Revelation Technologies, Inc. All rights reserved.
No part of this publication may be reproduced by any means, be it transmitted, transcribed, photocopied, stored in a
retrieval system, or translated into any language in any form, without the written permission of Revelation
Technologies, Inc.
SOFTWARE COPYRIGHT NOTICE
Your license agreement with Revelation Technologies, Inc. Authorizes the conditions under which copies of the
software can be made and the restrictions imposed on the computer system(s) on which they may be used. Any
unauthorized duplication or use of any software product produced by Revelation Technologies, Inc., in whole or in
part, in any manner, in print or an electronic storage-and-retrieval system, is strictly forbidden.
TRADEMARK NOTICE
OpenInsight is a trademark and Advanced Revelation is a registered trademark of Revelation Technologies, Inc.
Windows 2000®, Windows XP Professional®, Windows 2003® Windows 2008, Windows Vista Business® and
Windows 7 Ultimate®, Windows 8 above are registered trademarks of Microsoft, Inc.
Part No. 314-955
Printed in the United States of America.
2
Table of Contents
SECTION I: BEFORE YOU BEGIN....................................................................................................... 4 SECTION II: RUNNING THE INSTALLATION ON THE SERVER ............................................... 5 SECTION III: UPGRADING YOUR WORKSTATIONS .................................................................. 15 SECTION IV: SETTING YOUR OIPI VERSION............................................................................... 22 3
Section I: Before you begin
1.
Locate your installation authorization code that you received from Revelation Software or your authorized
reseller. You will need this authorization code to activate the upgrade process.
2.
Close all non-essential Windows programs.
3.
Stop the OEngineServer and OETelnetServer services from previous OpenInsight installations if
applicable.
4.
This software will only run on Windows NT, 2000, XP Professional, Vista Business 32&64-bit, Vista
Ultimate 32&64-bit, Windows 7 Ultimate 32&64-bit, 2000 Server, 2003 Server or 2008 Server.
5.
OpenInsight 9.4 and above includes a client install process. When initially installing the 9.4 (either a full
install or an upgrade), the client files can be installed on the ‘server’ (where OpenInsight is being installed
or upgraded) automatically at the end of the setup process. On other workstations, administrators must
point to the OpenInsight directory on the server and run the ClientSetup.exe file.
The Data Encryption component requires the Microsoft .NET 4.0 Framework.
The client install process contains the following components:





OpenInsight idxSets v1.3 – This is a .Net version of idx sets. This can be activated by changing
the configuration record CFG_IDX_SETS found in the SYSENV table.
OpenInsight Browser Control v1.0 – This component is for our “embedded” O4W that can be
used on an OpenInsight form.
RevelationDotNet – This contains OIPI.NET, the BRW, NetOI, RevDotNet, and all other .Net
2.0 utilities.
Revelation Software Encryption Client – This is a .Net 4.0 component of Data Encryption at
Rest (DER) on the client.
RevelationDotNet4.0 – This is a .Net 4.0 version of NetOI and RevDotNet
.
6.
Extract the install from the installation zip file.
Section II: Running the installation on the server
7.
Execute the Setup.exe from within the location to which the upgrade was extracted.
5
7
8.
If you selected to install the client files on the server you will be presented with the following screens.
9
11
13
Section III: Upgrading your workstations
9.
Execute the ClientSetup.exe from within your OpenInsight directory.
15
17
19
21
Section IV: Setting your OIPI version
1.
By default OpenInsight 9.4 will utilize OIPI.NET as the print engine. You can configure your system to
use OIPI by changing the VSPRINTER2 setting in the SYSENV table to VSPRINTER. From the
SYSPROG application open the System Editor.
2.
Select Open, Record.
23
3.
Choose the SYSENV table and the CFG_OIPI record.
4.
If you want to utilize OIPI in lieu of OIPI.NET set field 1 of the CFG_OIPI from VSPRINTER2 to
VSPRINTER. Save the record, close OpenInsight. Your changes will take effect when OpenInsight is
reopened.
25
Revelattion Software, Inc
99 Kind
derkamack Roaad Ste 109
Westwo
ood, NJ 07675
U.S.A
Toll Freee: 800-262-4747
Phone: 201-594-1422
2
Fax: 201-722-9815
www.reevelation.com
Revelation Software Ltd.
45 St Mary’s Road
Ealing,
London, W5 5RG
U.K.
Phone: +44 0 208 912 10000
Fax: +44 0 20
08 912 1001
info@revsoft.co.uk
Revelaation Software Australia Ptty
Ltd.
PO Boox 300
Brookv
kvale, NSW 21000
Austraalia
Phone: +61 2 8003 44199
Fax: +
+61 2 9332 60999
info@
@revelationsoftw
ware.com.au
Rev
velation Softwaare is a division
n of Revelation
n Technologiess, Inc.
Part No. 314-955