Flyer Installation and Maintenance

Transcription

Flyer Installation and Maintenance
OPTIMUM
PRODUCTS FOR
INSTALLATION AND
MAINTENANCE
INSTALLATION &
MAINTENANCE
All from a single source! The
right installation and maintenance
product for every industrial initial
coating.
Passion for wood
INSTALLATION AND
MAINTENANCE RANGE
OPTIMALLY COORDINATED INSTALLATION AND
MAINTENANCE PRODUCTS FOR ALL SITUATIONS
In spite of all the care and precautionary measures – sometimes even the
best coatings lead to unpredictable damage of the wooden components,
e.g. during transportation or installation. Even if it is only a small area of
damage, an immediate and professional repair is necessary in order to
prevent it from progressing and to preserve the coating, even within the
surface warranty.
This is precisely why there are optimally attuned products: with the complete installation and
maintenance range of the Sikkens Wood Coatings brand, you can correct any damage to your
wooden components. Even without damage, we recommend that you maintain your wooden
windows at regular intervals.
Your advantage:
Be it opaque or translucent, the installation and maintenance products are precisely coordinated
for the industrial top coat of the Sikkens Wood Coatings brand and, along with the precise colour
and luster concordance, also offer a very good adhesion between the top coat and the installation
or maintenance coat. From the small spot repair to re-painting the entire weatherboard, you can
make use of our tailored qualities in the system all from one source and permanently protect your
wooden components.
Optimum security from
one source by the
Sikkens Wood Coatings
brand:
•Perfectly coordinated with our
industrial top coats
•Precise colour concordance
•Precise luster concordance
•Tested adhesion
•
Market-driven 1 l packaging
•Simple colour tinting via the
colour-mix system
PRODUCT OVERVIEW
CETOL®
WV 885 BPD+
RUBBOL®
WP 105
CETOL®
WP 510
RUBBOL®
WF 310
Impregnation with blue stain and
rotting protection for static
non-earthed wooden components
not under load, exterior.
White primer with isolating properties
for the maintenance of wooden parts,
outside and inside.
Translucent primer for the
maintenance of wooden parts,
exterior and interior.
Semi matt, opaque mid and top coat
for the maintenance of wooden parts,
exterior and interior.
Type of binder: Pure acrylic
Application:
Dipping, flow
coating, brushing
Type of binder: Acrylic-alkyd resin
Application: Brushing
Type of binder: Acrylic copolymer
Application: Brushing
Type of binder: Pure acrylic
Application: Brushing
Water-soluble
Water-soluble
Water-soluble
Colours
Colourless
Colours
White
Colours
Joinery Colour Classics.
Other colour shades on request.
Colours
White similar to RAL 9016
Rubbol Collection and NCS
Packsizes
2.5 litres
Packsizes
1 litre
Packsizes
Base TC: 1 liter
Packsizes
RAL 9016: 1 litre
Base W05: 1 litre
Base N00: 0.98 litres
Colours
Colourless
Packsizes
1 litre
Water-soluble
ST 860
Liquid flow additive for the conversion of a water borne
translucent spray product into a brushable maintenance
coating. Only used for the repair of small damaged areas
(spot repair).
Processing: Mix ratio 1:10; addition of the additive for a spray product at
a ratio of 1 part ST 860 to 10 parts opaque/translucent coating. Good mixing
of the mixture. Processing by brushing.
Fields of application: For the repair of small damages to newly final coated
wooden windows, which occurred during transport or installation (not suitable
for renovation of weathered surfaces).
Water-soluble
Our technical data sheets and safety data sheets can be downloaded at: www.sikkens-wood-coatings.com
RUBBOL®
WF 318
CETOL®
WF 905
CETOL®
WF 910
CETOL®
WF 915
Satin-gloss, opaque mid and top coat
for the maintenance of wooden parts,
exterior and interior.
Matt, opaque mid and top coat for the
maintenance of wooden parts, exterior and interior.
Semi-matt, opaque mid and top coat
for the maintenance of wooden parts,
exterior and interior.
Satin-gloss, opaque mid and top coat
for the maintenance of wooden parts,
exterior and interior.
Type of binder: Pure acrylic
Application: Brushing
Type of binder:Pure acrylic
dispersion
Application: Brushing
Type of binder: Pure acrylic
Application: Brushing
Type of binder: Pure acrylic
Application: Brushing
Water-soluble
Water-soluble
Water-soluble
Water-soluble
Colours
White similar to RAL 9016
Rubbol Collection and NCS
Colours
Joinery Colour Classics.
Other colour shades on request.
Colours
Joinery Colour Classics.
Other colour shades on request.
Colours
Joinery Colour Classics.
Other colour shades on request.
Packsizes
RAL 9016: 1 litre
Base W05: 1 litre
Base N00: 0.98 litres
Packsizes
Base TC: 1 litre
Packsizes
Base TC: 1 litre
Packsizes
Base TC: 1 litre
The matching quality product can be found on the table below.
Top coat, industrial initial coating
Matching protection
Matching repair coating
RUBBOL WF 382/RUBBOL WF 380
®
RUBBOL WP 105
RUBBOL® WF 310
RUBBOL® WF 387/RUBBOL® WF 378
RUBBOL® WP 105
RUBBOL® WF 318
CETOL® WF 952/CETOL® WF 950
CETOL® WP 510
CETOL® WF 910
CETOL® WF 957/CETOL® WF 955
CETOL® WP 510
CETOL® WF 915
CETOL® WF 980
CETOL® WP 510
CETOL® WF 905
®
®
Are you look for renovation products?
In the case of damage to the coating you should act quickly to avoid further damage, even after the legal warranty period. Renovation
coating is easy with the high-quality products by Sikkens architectural paints, opaque coats and wooden varnishes. Further information can
be found at www.sikkens.com
GOOD TO KNOW!
This is how you make proper use of the maintenance products depending on the type of damage:
Condition: small spot damages to the
wooden surface
Condition: small scratches, hailstone
damage or streaks on the wooden
surface
Condition: deep scratches or lacquer
damage upon installation
Measure:
Spot repair: Product ST 860
Mix ratio: 1:10
(ST 860: Industrial initial coating)
Stir mixture well. Lightly abrade the
affected area with the non-woven
web. Then touch up with a brush.
Measure:
1.Sand wooden surface
(grit 200-220)
2.Paint 1 x with the right top coat
from the maintenance range
Measure:
1.Sand wooden surface
(grit 200-220)
2.For soft wood, preserve
(e.g. with CETOL® WV 885 BPD+)
3.Prime with the right primer from
the maintenance range
4.Fill up the defect location with the
top coat (paint 3 x with the right
top coat from the maintenance
range)
5.If required, sand the entire bar
and paint again 1 x
Cover correctly!
Please ensure that windows or outer doors are protected against damage or stains during building, cleaning or painting work. The foil and tape with
which frames, sashes and glass are covered and masked must be free of moisture and solvents as well as be UV and weatherproof (our Technology
dept. recommends 3M masking tape 244, Kipp special paper 308, Tesa protective tape 4438 UV). Please never leave the wooden elements masked
or covered for more than two weeks otherwise moisture could build-up in the wood. This could cause damage to the coating.
Safe transportation avoids damage
•Upon the order and packaging of the components with foil, it
must be ensured that sufficient air can circulate between the
components and the foil so that natural drying is not prevented.
•For transportation, the wooden windows must be vertically
mounted on a fixed substrate.
•Sit the windows on joists/palettes and attach them with
wooden strips.
•The wooden components should overlap a little so that the
subsequent foil does not come into contact with the coating.
•The foil (e.g. a PE foil) is spread across the entire window
package and attached to the strips or below to the joist/palette.
•As the windows are in the open for some time before being
unpacked, it must be ensured that no water can penetrate the
package.
•The package must be open at the bottom in order to ensure a
slight air exchange and to allow any penetrated water to drain
away. In any case, this prevents a build-up of moisture from
occurring.
Passion for wood
Akzo Nobel Industrial Coatings Ltd.
Unit 04a, Mercer Way
Shadsworth Business Park, Blackburn
Lancs, BB1 2QZ · United Kingdom
Tel.+44 1254 687 950
Fax+44 1254 687 960
sales.shadsworth@akzonobel.com
www.sikkens-wood-coatings.co.uk
With the right products
you will be able to enjoy
your high-quality wooden
windows and exterior
doors for a long time.
Passion for wood
Cleaning and care are essential for maintaining the value of the wooden windows and
doors. You can find more information on our
care and cleaning products in our care flyer,
which you can pass on to your customers for
perfect care.
Ask your contact person in field sales!
AN_200260_050314 01485/03/14/LW/P · MSRP €0.80 · Errors and omissions excepted.
PERFECTLY
NURTURED
OUT OF
PASSION
FOR WOOD